Transcript
5.385 4.635 19.088 5 1 4 3 7.126 15.375 1 INSTALLATION INSTRUCTIONS 1. 2. ITEM QTY. NO. PART NUMBER DESCRIPTION 1 1 10-002400 45 3.5" LOWER OFFSET BASE W/SLOTS 2 1 30-003203 HDM BASE, CROWN VIC 3 4 GSM31006 FLAT WASHER, 5/16" 4 4 GSM31027 LOCK WASHER, 5/16" 5 4 GSM33011 SCREW, 5/16-18 X 3/4" 3. 4. 5. REMOVE PASSENGER SIDE FRONT SEAT BOLTS. SLIDE BASE PLATE IN BETWEEN FLOOR AND SEAT BRACKETS. REINSTALL OEM SEAT BOLTS AND TIGHTEN TO VEHICLE MANUFACTURER'S TORQUE SPECIFICATION. ATTACH LOWER OFFSET TO BASEPLATE WITH 5/16" BOLTS, LOCK WASHERS AND FLAT WASHERS ANGLE TOWARDS CENTER OF VEHICLE. FOLLOW GENERAL INSTRUCTIONS FOR POLE AND UPPER MOUNT PARTS. HAVIS, INC. TITLE: 75 JACKSONVILLE RD, WARMINSTER, PA. 18974 1-800-524-9900 95-11 CROWN VIC HDM BASE ASSEMBLY DO NOT SCALE DRAWING SIZE A DWG. NO. C-HDM-101-INST WEIGHT (LB): 7.82 SCALE: 1:8 REV B SHEET 1 OF 1
