Download Lumene Majestic Premium 270V

Choose screws for mounting according to your wall or ceiling material
(x1)
(x2)
(x2)
(x6)
(x1)
(x1)
(x1)
(x1)
The thickness of the wood ceilings must be ≥ 30 mm
Choisissez les vis et les chevilles adaptées aux matériaux du mur ou du plafond
L’épaisseur des plafonds en bois doit être ≥ 30 mm
(x1)
Recommended for fixed installation
Configuration préconisée pour une installation permanente
Ceiling
Wall + Ceiling
Mur + Plafond
1
D
D
Recommended for traditionnal installation
Configuration préconisée pour une installation classique
Wall
Mur
Plafond
200V, 200C, 240V, 240C, 270C
Wall
Mur
D
Semi-suspended
Suspended
Suspendu
Semi-suspendu
D
D
2
x8
x8
D
D
D
On ceiling
Au plafond
On ceiling
Au plafond
On wall
Au mur
On wall
Au mur
<5 mm
< 1 1 mm
< 1 1 mm
7 mm <
< 1 1 mm
< 5mm
7 mm <
< 5mm
7 mm <
7 mm <
< 5mm
3 mm
8 mm
< 11 mm
or / ou
Update — Mise à jour : V2.0_30/08/2012-A
D
4
5
D
D
x8
3
On ceiling
Au plafond
x8
On wall
Au mur
Please make sure connections are compatible and safe
200V, 200C, 240V, 240C, 270C
Power connection
Side panel
Manual/Remote
C
D External IR sensor
A
RS232 controller
B
Manual control
Control methods
Manual control
1
E
Automatic control (Trigger)
2
1
2
External control (RS232)
3
1
C
UP
3.5mm Jack mono
STOP
A
B
On
A
Switch
Pinout
RJ12
-
+
2 x 1.5V
AAA x 2
+
1
1
Integrated infrared
8
DB-9
External IR sensor
2
3
4
5
D
UP
STOP
or
DOWN
MICRO UP
B
MICRO DOWN
Update : V2.0_30/08/2012-A
2
4
9
6
RJ12
Remote control
3
7
2
5
Bits/sec: 2400
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none
6
Off
3
Settings
(Hexadecimal)
Up: FF EE EE EE DD
Stop: FF EE EE EE CC
Down: FF EE EE EE EE
1
123456
+ 5V —12V DC
Infrared control
Control system
DB-9
RS232 sequences
5
-
3
E
A
TRIGGER
DOWN
2
5
Trigger
1
B
3
Caution
- Controller will work within 30 degrees away horizontally from the center of the receiver point
within 8 meters from the screen.
- The controller will not work if the signal is covered by something.
- Please remove the battery from the remote control when the controller is not being used for a long time.
- Please use the same type of battery as originally supplied.
- If the receiver is to be out of use for a long time, please turn the electricity off or unplug it.
- Keep the controller away from high temperature and humidity.
- Please change the battery when the signal is low.
http://www.lumene-screens.com
30/08/2012-A
≥
≥
30/08/2012-A
Slot A
30/08/2012-A
Slot B