Transcript
wrapsol front Easy Tack™ dry application process watch how-to videos: Easy Tack™, Application Handles™, Active Air Release™ + Aqueous Application 4 1 wrapsol.com/support remove TOP protective layer ONLY youtube.com/wrapsol facebook.com/wrapsol twitter.com/wrapsol repositionable film for your tablet device screen-only 2 front use large squeegee clean your device 5 3 back 390009 pull DOWN on Application Handles™ to REMOVE remove + discard backing wrapsol back aqueous application process use small squeegee 24 1 < 1 mm < 1/32" clean device videos + support 2 wet fingerptips remove excess material wrapsol.com/support [email protected] 1 888 WRAPSOL +1 781 828 1860 3 adhesive side stay protected. stay connected. 8-10 pumps from mister held about 8 inches away leave the iPad powered off for 1 hour, allowing moisture to evaporate.