Transcript
S P E F C I L E ET-PKE200S Ceiling mount bracket for low ceilings D escription This ceiling mount bracket is used when mounting a Panasonic projector to low ceilings. NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W × H × D): +10°, -40° ±15° ±10° 230 × 159 × 230 mm (9-1/16 × 6-1/4 × 9-1/16 inches) Approx. 2.5 kg* (5.5 lbs*) ET-PKE200B Weight: Applicable bracket assembly: * Average value. May differ depending on models. Parts Projector mount bracket . . . . . . . . . . . . . . . . . . . 1 Safety wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Caution: • Mounting should be done by a qualified technician. • Make sure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions thoroughly before starting. • Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions. • When the product is no longer going to be used, have it disposed of quickly by a professional disposal service. 264 (10-13/32) Dimensions 489.5 (19-9/32) Projector 185.5 (7-5/16 ) 184.5 (7-1/4) 60 ( 2-3/8 ) 4-∅54 4-10 × 14 60 ( 2-3/8 ) 120 (4-23/32) (13/32 × 9/16 ) 60 ( 2-3/8 ) The illustration shows the ceiling mount bracket when it is combined with the ET-PKE200B and the PT-EZ570/EZ570L/EW630/EW630L/EX600/EX600L/ EW530/EW530L/EX500/EX500L is attached. As of April 2012 SFL12A010 60 ( 2-3/8 ) 120 (4-23/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. 1/1
