Transcript
S P E C F I L E ET-PKA110H Ceiling mount bracket for high ceilings D escription This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling. Specifications Vertical correction angle Horizontal slant correction angle Horizontal turn correction angle Dimensions (W × H × D) +5°, -20° ±10° ±5° 306 × 306 – 386 × 174 mm (12-1/16˝ × 12-1/16˝–15-5/16˝ × 6-7/8˝) Approx. 2.4 kg* (5.3 lbs*) PT-AE7000/AT5000/AR100/AH1000 Weight Applicable projectors * Average value. May differ depending on models. Parts Attachment plate . . . . . . Projector mount bracket Adjustment pole A . . . . . Adjustment pole B . . . . . Angle adjusting bracket A Angle adjusting bracket B . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 Washer-fitted hexagonal bolts (M6 × 12) Washer-fitted screws (M4 × 10) . . . . . . . Wire rope for ceiling mount bracket . . . Flat wire clip for ceiling mount bracket . Clamp tube for ceiling mount bracket . . Wire rope for projector unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 . 5 . 1 . 2 . 2 . 1 Caution: • All mounting work must be done by a qualified technician. • Ensure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions carefully before starting the mounting procedure. • When the system is no longer to be used, have a qualified technician promptly remove and dispose of it. • Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool should be used. Dimensions Illustration shows the ET-PKA110H attached to a projector. Attachment plate ∅43 (1-11/16 ) 100 ( 3-15/16 ) Attachement plate 130 ( 5-1/8 ) ∅49 (1-15/16 ) 150 ( 5-29/32) Adjustable in 20 mm ( 25/32) steps 370.5− 450.5 (14-19/32 –17-3/4) 3-∅9.5 ( ∅3/8 ) ∅8.5 ( ∅11/32) 110 (4-11/32) 140 ( 5-1/2) 160 ( 6-5/16 ) Projector 62 ( 2-7/8 ) 20 ( 2-9/16 ) PT-AE7000 /AT5000 : 214 ( 8-7/8 ) PT-AR100 /AH1000 : 230 ( 9-1/16 ) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of September 2011 SFL11A005 1/1