Download LG BH6220C home cinema system

OWNER’S MANUAL
3D Blu-ray™/ DVD
Home Cinema System
Please read this manual carefully before operating
your set and retain it for future reference.
BH6220C (BH6220C, S62S1-S, S62S1-W)
BH6320C (BH6320C, S62C2-S, S62S1-W)
P/NO : SAC35494101
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION : CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Getting Started
This device is equipped with a portable battery or
accumulator.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you
purchased the product.
Disposal of waste batteries/accumulators
1.When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product it means
they are covered by European Directive
2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the battery
Contains more that 0.0005% of
mercury,0.002% of cadmium or 0.004%
of lead.
3. All batteries/accumulators should be
disposed separately from the municipal
waste stream via designated collection
facilities appointed by the government
or the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
4
1
Getting Started
Getting Started
LG Electronics hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and
other relevant provisions of Directive
2004/108/EC, 2006/95/EC, and
2009/125/EC.
European Standards Centre:
Veluwezoom 15, 1327 AE Almere, The
Netherlands (Tel : +31-(0)36-547-8888)
yy Please note that this is NOT a
Customer Service contact point. For
Customer Service Information, see
Warranty Card or contact the dealer
that you purchased this product.
Notes on Copyrights
yy Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact
an authorized Customer Service Centre.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
Getting Started
5
Important Notice for TV colour
system
The colour system of this player differs according to
currently playing discs.
Only the multi system colour TV can receive all
signals output from the player.
yy If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
yy The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
yy Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
1
Getting Started
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
6
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
8Introduction
8
– Playable Discs and symbols used in
this manual
9
– About the “7” Symbol Display
9
– Compatibility Notes
10 – File compatibility
11 – AVCHD (Advanced Video Codec High
Definition)
12 – About DLNA
12 – Certain System Requirements
12 – Regional Code
12 – System Select (Optional)
13 Remote control
14 Front panel
15 Rear panel
2Connecting
16
16
16
17
17
18
18
19
20
20
20
21
22
22
23
25
25
Speaker Connection
– Attaching the speakers to the player
Connecting to Your TV
– HDMI Connection
– What is SIMPLINK?
– Video Connection
– Resolution Setting
Antenna connection
Connections with external device
– AUX Connection
– PORT. IN connection
– OPTICAL IN connection
Connecting to your Home Network
– Wired network connection
– Wired Network Setup
USB device connection
– Playback content in the USB device
3 System Setting
26Settings
26 – Initial Setup
27
28
29
30
32
33
33
35
– Adjust the Setup Settings
– [DISPLAY] Menu
– [LANGUAGE] Menu
– [AUDIO] Menu
– [LOCK] Menu
– [NETWORK] Menu
– [OTHERS] Menu
Sound Effect
4 Operating
36
36
36
36
37
37
38
38
39
39
39
39
40
40
40
40
41
41
42
42
43
43
44
44
44
44
45
45
45
46
46
46
46
46
General Playback
– Using [HOME] menu
– Playing a Disc
– Playing a file on a disc/USB device
– Playing Blu-ray 3D disc
– Enjoying BD-Live™
– Playing a file on a network server
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last Scene Memory
Advanced Playback
– Repeat Playback
– Repeating a specific portion
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Options while viewing a photo
– Listening to music while slide show
On-Screen display
– Displaying content information onscreen
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle code page
– Changing the Picture Mode
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting a saved station
– Deleting all the saved stations
Table of Contents
46
46
47
47
48
48
– Improving poor FM reception
– See information about a radio station
Using the Premium
Using the LG Apps
– Signing in
– Managing my Apps
5Troubleshooting
49Troubleshooting
49 – General
50 – Network
51 – Picture
51 – Sound
51 – Customer Support
51 – Open source software notice
6Appendix
52 Controlling a TV with the Supplied
Remote Control
52 – Setting up the remote to control your
TV
53 Network Software Update
53 – Network update notification
53 – Software Update
55 About Nero MediaHome 4 Essentials
55 – System Requirements
56 – Installing Nero MediaHome 4
Essentials
56 – Sharing files and folders
57 Area Code List
58 Language code List
59 Trademarks and Licenses
61 Audio Output Specifications
62Specifications
64Maintenance
64 – Handling the Unit
64 – Notes on Discs
65 Important Information Relating to
Network Services
7
1
2
3
4
5
6
8
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Description
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
Blu-Ray
y
u
i
r
DVD-ROM
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm, 12 cm)
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW
(VR)
(8 cm, 12 cm)
r
Audio CD
(8 cm, 12 cm)
t
CD-R/RW
(8 cm, 12 cm)
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
Note
–
Caution
–
VR mode and finalized only
Audio CD
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible
damages from abuse.
Getting Started
,,Note
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Compatibility Notes
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-inpicture function. For the playback method, refer
to the instructions in the disc.
yy Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy You can use a USB device to store some disc
related information, including downloaded online content. The disc you are using will control
how long this information is retained.
1
Getting Started
yy Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
9
10
Getting Started
File compatibility
Movie files
1
Getting Started
File
Location
File
Extension
Codec Format
Disc,
USB
“.avi”, “.divx”,
“.mpg”, “.mpeg”,
“.mkv”, “.mp4”,
“.asf”, “.wmv”,
“.m4v” (DRM
free), “.vob”,
“.3gp”
DIVX3.xx, DIVX4.xx,
DIVX5.xx, DIVX6.xx
(Standard playback
only), XVID, MPEG1 SS,
H.264/MPEG-4 AVC,
MPEG2 PS, MPEG2 TS,
VC-1 SM (WMV3)
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
(.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
DLNA
“.avi”, “.divx”,
“.mpg”, “.mpeg”,
“.mkv”, “.mp4”,
“.asf”, “.wmv”,
".m4v" (DRM
free)
DIVX3.xx, DIVX4.xx,
DIVX5.xx, DIVX6.xx,
XVID, MPEG1 SS,
H.264/MPEG-4 AVC,
MPEG2 PS, MPEG2 TS,
VC-1 SM (WMV3)
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD Subtitle
System (.txt)
Audio Format
Subtitle
Music files
File
Location
File
Extension
Disc,
USB
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192
kbps (WMA), within
32 - 320 kbps (MP3)
Some wav files are
not supported on this
player.
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192
kbps (WMA), within
32 - 320 kbps (MP3)
Some wav files are
not supported on this
player.
DLNA
Sampling Frequency
Bitrate
Note
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”
Recommended
Size
Note
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA
and WMV.
Getting Started
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/folder: Less than 2 000
(total number of files and folders)
yy File compatibility may differ depending on
the server.
yy Because the compatibility on DLNA server
are tested on the bundle DLNA server
(Nero MediaHome 4 Essentials Windows
edition) environment, file requirements and
playback functions may differ depending on
media servers.
yy Supplied bundle DLNA server for Macintosh
edition has limitations in file compatibility,
such as ASF, WMA and WMV.
yy The file requirements on page 10 are
not always compatible. There may have
some restrictions by file features and media
server’s ability.
yy Playing a movie subtitle files are only
available on share folder of a PC or DLNA
media server created by supplied Nero
MediaHome 4 Essentials software on this
player package.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
yy This unit cannot support the ID3 Tag
embedded MP3 file.
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files.
yy HD movie files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD movie files.
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. For a file
with higher level, the warning message will
appear on the screen.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy This player supports UTF-8 files even it
contains Unicode subtitle contents. This
player can not support the pure Unicode
subtitle files.
yy Depending on the types of file or ways of
recording, it may not play back.
yy A disc which was recorded by multi-session
on normal PC is not supported on this
player.
yy To be playback a movie file, movie file name
and Subtitle file name must be the same.
yy If video codec is MPEG2 TS or MPEG2 PS,
subtitle does not play back.
yy The total playback time of music file
indicated on the screen may not correct for
VBR files.
AVCHD (Advanced Video
Codec High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital
video camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
1
Getting Started
yy Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
11
12
1
Getting Started
Getting Started
About DLNA
Regional Code
This Player is a DLNA Certified digital media player
that can display and play movie, photo and music
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or “ALL”.
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
System Select (Optional)
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Certain System Requirements
For high definition video playback:
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
You must select the appropriate system mode for
your TV system. Open the disc tray using the B
(Open/Close) button and then, press and hold M
(PAUSE) for more than five seconds to be able to
select a system (PAL, NTSC, AUTO)
Getting Started
Remote control
INFO/MENU
• • • • • • a • • • • • • • • • • • • c • • • • • •
FUNCTION: Changes input mode.
SPEAKER LEVEL: Sets the sound
level of desired speaker.
SUBTITLE: Selects a subtitle
language.
FUNCTION
1 (POWER): Switches the player
ON or OFF.
INFO/MENU
B (OPEN/CLOSE): Ejects a disc.
SLEEP: Sets a certain period of
time after which the unit will
switch to off.
INFO/MENU (m): Displays or
exits On-Screen Display.
HOME ( ): Displays or exits the
[Home Menu].
DISC MENU: Accesses menu on a
disc.
• • • • • • b • • • • • •
Direction buttons: Selects an
option in the menu.
PRESET +/-: Selects programme
of Radio.
TUNING +/-: Tunes in the desired
radio station.
Battery Installation
VOL +/-: Adjusts speaker INFO/MENU
volume.
OPTICAL: Changes input mode to
optical directly.
MUTE: Mute the unit.
Colored (R, G, Y, B) buttons:
- Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC], [Premium] and
[LG Apps] menu.
- B button: Selects mono/ stereo
in FM mode.
RDS: Radio Data System.
PTY: Views the programme type
of the RDS.
PTY SEARCH:
Searches programme type.
0-9 numerical buttons: Selects
numbered options in a menu.
ENTER (b): Acknowledges menu
selection.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
BACK ( ): Exits the menu or
returns to the previous screen.
REPEAT (h): Repeats a desired
section or sequence.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
AUDIO: Selects an audio language
or audio channel.
Z (STOP): Stops playback.
? : Marked button is not available.
z (PLAY): Starts playback.
M (PAUSE/STEP): Pauses
playback.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
c/v (SCAN): Searches
backward or forward.
Remove the battery cover on the
rear of the Remote Control, and
insert R03 (size AAA) battery with
4 and 5 matched correctly.
SOUND EFFECT: Selects aFUNCTION
sound
effect mode.
X (REC): Records an audio CD.
• • • • • • d • • • • • •
TV Control Buttons: See page
52.
1
Getting Started
FUNCTION
13
14
Getting Started
Front panel
2
1
1
Getting Started
3
4
a Disc tray
b Display Window
c PORT. IN
d USB Port
1
3
4
5
5
e Operation buttons
R (Open / Close)
T (Play / Pause)
I (Stop)
F (Function)
Changes the input source
2 or function.
VOL -/+
1 (Power)
6
Getting Started
15
Rear panel
1
Getting Started
a AC power cord
g LAN port
b Speakers connectors
h HDMI OUT TO TV
c Cooling Fan
i VIDEO OUT
d OPTICAL IN
e Antenna Connector
f AUX (L/R) INPUT
Connecting
16
Speaker Connection
Attaching the speakers to the
player
2
1. Connect speaker wires to the player.
Each speaker wire is color-coded. Use matching
color wires for corresponding speakers.
Connecting to Your TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
yy HDMI connection (page 17)
yy Video connection (page 18)
,,Note
Connecting
yy Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
yy Please refer to the manuals of your TV,
stereo system or other devices as necessary
to make the best connections.
Color
Speaker
Position
Orange
Sub
woofer
Any front position
Red
Front
Front right
White
Front
Front left
2. Connect the speaker wire to the terminal on the
speaker.
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end
to the terminals marked + (plus).
yy Make sure the player is connected directly
to the TV. Tune the TV to the correct video
input channel.
yy Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
Connecting
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
speed HDMI™ cable with Ethernet). Connect the
HDMI jack on the player to the HDMI jack on a
HDMI compatible TV or monitor.
17
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 18.)
Rear of the unit
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
HDMI cable
TV
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
2
Connecting
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page
29).
18
Connecting
Video Connection
Resolution Setting
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable. You can
hear the sound through the system’s speakers.
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Setup] menu.
1. Press HOME ( ).
2. Use A/D to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
Rear of the unit
3. Use W/S to select [DISPLAY] option then
press D to move to the second level.
2
Connecting
4. Use W/S to select the [Resolution] option
then press ENTER (b) to move to the third level.
Video cable
TV
5.Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
Connecting
,,Note
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1.Press B to open the disc tray.
19
Antenna connection
Connect the supplied antenna for listening to the
radio.
2Press Z (STOP) for more than 5 seconds.
yy When you set the resolution to 576i with
HDMI connection, actual resolution is
outputted to 576p.
2
yy If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
yy The resolution of the VIDEO OUT jack is
always outputted at 576i resolution.
Connecting
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
Rear of the unit
,,Note
After connecting the FM wire antenna, keep
it as horizontal as possible. Be sure to fully
extend the FM wire antenna.
20 Connecting
Connections with
external device
AUX Connection
You can enjoy the sound from an external
component through the speakers of this system.
2
Connecting
Connect the analog audio output jacks of your
component into the AUX L/R (INPUT) on this unit.
And then select the [AUX] option by pressing
FUNCTION and ENTER (b).
PORT. IN connection
You can enjoy the sound from your portable audio
player through the speakers of this system.
Connect the headphones (or line out ) jack of the
portable audio player into the PORT. IN socket of
this unit. And then select the [PORTABLE] option by
pressing FUNCTION and ENTER (b).
You can also use the F (Function) button on the
front panel to select the input mode.
You can also use the F (Function) button on the
front panel to select the input mode.
Rear of the unit
MP3 player, etc...
Red
White
To the audio output jacks
of your component
(TV, VCR, etc.)
Connecting
21
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your component
into the OPTICAL IN jack on the unit. And then
select the [OPTICAL] option by pressing FUNCTION
and ENTER (b). Or press OPTICAL to select directly.
You can also use the F (Function) button on the
front panel to select the input mode.
To the digital
optical output jack
of your component
Connecting
Rear of the unit
2
22 Connecting
Connecting to your
Home Network
2
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-LIVE interactivity and on-line
content services.
Broadband
service
Connecting
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
,,Note
DLNA certified
servers
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
yy To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
(see page 55)
Rear of the unit
Connecting 23
Wired Network Setup
Advanced Setting
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
If you want to set the network settings manually,
use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
2
Preparation
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
Connecting
Before setting the wired network, you need to
connect the broadband internet to your home
network.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
W/S/A/D and numerical buttons. If you
make a mistake while entering a number, press
CLEAR to clear the highlighted part.
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
2. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
3. Press ENTER (b) while [Close] is highlighted to
finish the wired network settings.
24 Connecting
Notes on Network Connection:
yy Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Connecting 25
USB device connection
This player can play movie, music and photo files
contained in the USB device.
Playback content in the USB
device
1. Insert a USB device to the USB port until it fits
into place.
,,Note
yy This player supports USB flash drive/
external HDD formatted in FAT16, FAT32 and
NTFS when accessing files (music, photo,
movie). However, for BD-Live and Audio CD
recording, only FAT16 and FAT32 formats are
supported. Use the USB flash drive/external
HDD formatted in either FAT16 or FAT32
when using BD-Live.
yy This unit can support up to 4 partitions of
the USB device.
yy Do not extract the USB device during
operation (play, etc.).
When you connect the USB device on the HOME
menu, the player plays only music file contained
in the USB storage device automatically. If the USB
storage device is containing various types of files, a
menu for the file type selection will appear.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4. Select the [USB] option using W/S, and press
ENTER (b).
yy A USB device which requires additional
program installation when you have
connected it to a computer, is not
supported.
yy USB device: USB device that supports
USB1.1 and USB2.0.
yy Movie, music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
yy Regular back up is recommended to
prevent data loss.
yy If you use a USB extension cable, USB HUB
or USB Multi-reader, the USB device may not
be recognized.
yy Some USB device may not work with this
unit.
yy Digital camera and mobile phone are not
supported.
yy USB Port of the unit cannot be connected
to PC. The unit cannot be used as a storage
device.
5. Select a file using W/S/A/D, and press
PLAY or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
2
Connecting
yy The USB device can be used for the local
storage for enjoying BD-LIVE discs with
Internet.
26 System Setting
Settings
4. Select [Next] and press ENTER (b).
5. Check all the settings that you have set in the
previous steps.
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language, network settings and speaker
setup on the initial setup wizard.
1.Press 1 (POWER).
The initial setup wizard appears on the screen.
2.Use W/S/A/D to select a display language
and press ENTER (b).
3
System Setting
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
If wired network is connected , the network
connection setting will automatically be
finished.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use A/D to select
[Previous] and press ENTER (b).
System Setting 27
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
4.Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
1. Press HOME ( ).
5.Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
2.Use A/D to select the [Setup] and press
ENTER (b). The [Setup] menu appears.
3
System Setting
3.Use W/S to select the first setup option, and
press D to move to the second level.
28 System Setting
[DISPLAY] Menu
Resolution
TV Aspect Ratio
Sets the output resolution of the HDMI video signal.
Refer to page 18 for details about the resolution
setting.
Select a TV aspect ratio option according to your TV
type.
3
[Auto]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[1080p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[1080i]
[4:3 Letter Box]
System Setting
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
Outputs 1080 lines of progressive video.
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[576p]
Outputs 576 lines of progressive video.
[576i]
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
System Setting 29
HDMI Color Setting
[LANGUAGE] Menu
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
Display Menu
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
3D Mode
[Off]
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[On]
Blu-ray 3D disc playback will output as 3D
mode.
Wallpaper
Changes the background of the initial screen.
Home Menu Guide
This function allows you to display or delete the
guide bubble on the Home Menu. Set this option
to [On] for displaying guide.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
58.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,,Note
Depending on the disc, your language setting
may not work.
3
System Setting
Select the type of output mode for Blu-ray 3D disc
playback.
Select a language for the [Setup] menu and onscreen display.
30 System Setting
[AUDIO] Menu
Speaker Setup
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
To obtain the best possible sound, use the speaker
setup display to specify the volume of the speakers
you have connected and their distance from your
listening position. Use the test to adjust the volume
of the speakers to the same level.
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 61 for details.
Digital Output
[PCM Stereo] (HDMI only)
3
System Setting
Select if you connect this unit’s HDMI OUT jack
to a device with two-channel digital stereo
decoder.
[Speaker]
[PCM Multi-Ch] (HDMI only)
Select a speaker that you want to adjust.
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
[Volume]
[DTS Re-Encode] (HDMI only)
[Distance]
Select if you connect this unit’s HDMI OUT jack
to a device with DTS decoder.
[BitStream] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
,,Note
yy When [Digital Output] option is set to [PCM
Multi-Ch], the audio may output as PCM
Stereo if the PCM Multi-Ch information is
not detected from HDMI device with EDID.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [BitStream]).
yy This setting is not available on the input
signal from an external device.
Adjust the output level of each speaker.
Adjust the distance between each speaker and
the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
System Setting
31
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this
is called HD AV Sync. Use W S to scroll up and
down through the delay amount, which you can
set at anything between 0 and 300 ms.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Off]
Turns off this function.
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
3
System Setting
[On]
32 System Setting
[LOCK] Menu
DVD Rating
The [LOCK] settings affect only BD-ROM and DVD
playback.
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
3
[None]
System Setting
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 57.
System Setting 33
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD Live and on-line content
services.
Connection Setting
If your home network environment is ready to
connect the player, the player needs to be set the
wired for network communication. (See “Connecting
to your Home Network” on page 22.)
Connection Status
BD-LIVE connection
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BDLIVE contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-LIVE
contents without a certificate.
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
[Country Setting]
Select your area for displaying proper services
and contents on the [Premium] and [LG Apps]
feature.
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
[OTHERS] Menu
DivX VOD
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and
software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
,,Note
All the downloaded videos from DivX(R) VOD
with this player’s registration code can only be
played on this unit.
3
System Setting
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
Premium/LG Apps
34 System Setting
Network Play
Auto Power Off
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
The screen saver appears when you leave the
player in Stop mode for about five minutes. If
you set this option to [On], the unit automatically
turns off within 20 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
,,Note
3
System Setting
yy This unit and the DLNA Certified Smartphone
must be connected to the same network.
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
( ) to display the home menu before
connecting to this unit.
yy While controlling the unit using the [Network
Play] function, the remote control may not work.
yy Available file formats described on page
10 are not always supported on [Network
Play] function.
,,Note
Depending on the function, this function may
not be available.
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see page 53).
Disclaimer Notice
Press ENTER (b) to view the notice of Network
Service Disclaimer.
System Setting 35
Sound Effect
Setting the [User EQ]
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears
on the front panel display or the TV screen. The
displayed items for the equalizer maybe different
depending on sound sources and effects.
[Natural]: You can enjoy comfortable and natural
sound.
[Bypass]: Software with multichannel surround
audio signals is played according to the way it was
recorded.
[Bass Blast]: Reinforce the bass sound effect from
front left and right speaker and subwoofer.
[User EQ]: You can adjust the sound by raising or
lowering the level of specific frequency.
2.Use A/D to select the desired level.
Select [Cancel] option then press ENTER (b) to
cancel the setting.
Select [Reset] option then press ENTER (b) to reset
the all adjustments.
3
System Setting
[Loudness]: Improves bass and treble sound.
1.Use W/S to select the desired frequency.
36 Operating
General Playback
Playing a Disc
erot
Using [HOME] menu
1.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
The home menu appears when you press HOME
( ). Use W/S/A/D to select a category and
press ENTER (b).
2.Press B (OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3.Press HOME ( ).
4. Select [Movie] or [Music] using A/D, and press
ENTER (b).
5. Select [Blu-ray Disc], [DVD], [VR] or [Audio]
option using W/S, and press ENTER (b).
,,Note
,,Note
4
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
k
Operating
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
Depending on the region, [LG Apps] service
and [Search] function may not be available
at the moment. The service may become
available in these regions through at software
update later.
yy Unfinalized DVD VR format discs may not be
played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
a [Music] - Plays audio contents.
b [Movie] - Plays video contents.
c [Photo] - Plays photo contents.
[Premium] - Displays the Premium Home
d
screen.
e [LG Apps] - Displays the [LG Apps] screen.
f [Input] - Changes input mode.
g [Setup] - Adjusts the system settings.
h
[Search] - Searching an on-line content by
inputting a keyword on the search menu.
i [LG Apps] - Displays the [LG Apps] screen.
j
[Favorite Apps] - Shortcut for user’s favorite
Apps.
k [My Apps] - Displays the My Apps screen.
Playing a file on a disc/USB
device
yui
This player can play movie, music and photo files
contained in the disc or USB device.
1. Insert a data disc on the tray or connect a USB
device.
The unit plays only music file contained in the
USB storage device or disc automatically.
2.Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4. Select [Data] or [USB] option using W/S, and
press ENTER (b).
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating 37
Playing Blu-ray 3D disc
e
Enjoying BD-Live™
e
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
Preparation
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
yy Check your TV is 3D capable and has HDMI
input(s).
ear 3D glasses to enjoy the 3D experience
yy W
if it is necessary.
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
yy Connect an HDMI cable (High Speed HDMI™
Cable with Ethernet) between the player’s
HDMI output and TV’s HDMI input.
2.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3.Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
2. Insert a USB storage device to the USB port on
the front panel.
A USB storage device is needed to download
bonus content.
3.Press HOME ( ), and set the [BD-LIVE
connection] option on the [Setup] menu (page
33).
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
The operations are differ depending on the disc.
Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device
while content is being downloaded or a Bluray disc is still in the disc tray. Doing so may
damage the connected USB device and BDLive features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
,,Note
yy Some BD-Live contents may be restrictively
accessed in some territories by contents
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live contents.
4
Operating
1.Press HOME ( ), and set the [3D Mode] option
on the [Setup] menu to [On] (page 29).
1. Check the network connection and settings
(page 22).
38 Operating
Playing a file on a network
server
yui
Basic operations for video and
audio content
This player can play video, audio and photo files
located in a DLNA server through your home
network.
Press Z (STOP) while playback.
1. Check the network connection and settings
(page 22).
2.Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4. Select a DLNA media server on the list using
W/S, and press ENTER (b).
To stop playback
To pause playback
Press M (PAUSE) while playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) while movie playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
To scan forward or backward
Press c or v to play fast forward or fast reverse
during playback.
4
Operating
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
If you want to rescan available media server,
press the green (G) colored button.
5. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
,,Note
yy The file requirements are described on page
10.
yy The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
yy The subtitle file name and movie file name
have to be the same and located at the
same folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC.
(see page 55)
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of contents in a folder together. In this
case, press C or V to go to the previous or
next content with same type.
Operating 39
Basic operations for photo
content
To play a slide show
Press d (PLAY) to start slide show.
To stop a slide show
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D
to go to the previous or next photo.
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu while playback, press DISC
MENU.
Use W/S/A/D buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears while playback.
Press TITLE/POPUP while playback, and use W/S/
A/D buttons to navigate through menu items.
Last Scene Memory
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
4
Operating
Using the disc menu
ero
Resume playback
eroyt
u
40 Operating
Advanced Playback
Repeating a specific portion
eroty
Repeat Playback
erotu
y
This player can repeat a portion you have selected.
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
Blu-ray Disc / DVD / Movie files
jA- – Selected portion will be repeated continually.
jChapter – The current chapter will be played
back repeatedly.
jTitle – The current title will be played back
repeatedly.
jAll – All the tracks or files will be played back
repeatedly.
4
Operating
To return to normal playback, press REPEAT (h)
repeatedly to select [Off ].
Audio CDs/Music files
;Track– The current track or file will be played
back repeatedly.
:All – All the tracks or files will be played back
repeatedly.
l – The tracks or files will be played back in
random order.
l:All – All the tracks or files will be played
back repeatedly in random order.
kA-B – Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
,,Note
yy If you press V once during Repeat
Chapter/Track playback, the repeat playback
cancels.
yy This function may not work on some disc or
title.
1. While playback, press REPEAT (h) to select
[A-] at the beginning of the portion you wish to
repeat.
2.Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
3. To return to normal playback, press REPEAT
(h) repeatedly to select [Off ].
,,Note
yy You cannot select a portion less than 3
seconds.
yy This function may not work on some disc or
title.
Viewing content information
y
The player can display the content information.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m) to display the option
menu.
3. Select the [Information] option using W/S,
and press ENTER (b).
The file information appears on the screen.
While movie playback, you can display the file
information by pressing TITLE/POPUP.
,,Note
The information displayed on the screen
may not correct comparing actual content
information.
Operating
41
Changing content list view
yui
Selecting a subtitle file
y
On the [Movie], [Music] or [Photo] menu, you can
change the content list view.
If the subtitle file name is different from the movie
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
Method 1
Press red (R) colored button repeatedly.
1.Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2.Press ENTER (b).
,,Note
yy If you press Z (STOP) while playback, the
subtitle selection is cancelled.
yy This function is not available for playing file
on a server via home network.
Method 2
1. On the content list, press INFO/MENU (m) to
display the option menu.
2.Use W/S to select the [View Change] option.
3.Press ENTER (b) to change the content list
view.
4
Operating
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the movie file.
42 Operating
Options while viewing a photo
i
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an option using W/S.
Listening to music while slide
show
i
You can display photo files while listening to music
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2.Use W/S to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
3.Use W/S to select a device, and press ENTER
(b).
Device that you can select are differ depending
on the location of the photo file you are
displaying in full screen.
4
Operating
a Current photo/Total number of photos
– Use A/D to view previous/next photo.
b Slide Show – Press ENTER (b) to start or
pause slide show.
Photo location
Available Device
Disc, USB
Disc, USB
DLNA server
DLNA server
4.Use W/S to select a file or a folder you wish to
play.
c Music Select – Select the background
music for the slide show (page 42).
d Music –Press ENTER (b) to start or pause
background music.
e Rotate – Press ENTER (b) to rotate the
photo clockwise.
f Zoom – Press ENTER (b) to display the
[Zoom] menu.
g Effect – Use A/D to select a transition
effect between photos in a slide show.
h Speed – Use A/D to select a delaying
speed between photos in a slide show.
3. Press BACK (1) to exit the option menu.
Select g and press ENTER (b) to display the
upper directory.
,,Note
When selecting music file from a server, folder
selection is not available. Only file selection is
available.
5.Use D to select [OK], and press ENTER (b) to
complete music selection.
Operating 43
On-Screen display
2. Select an option using W/S.
You can display and adjust various information and
settings about the content.
4. Press BACK (1) to exit the On-Screen display.
Displaying content information
on-screen
eroy
1. While playback, press INFO/MENU (m) to show
various playback information.
3.Use A/D to adjust the selected option value.
,,Note
yy If no button is pressed for a few seconds,
the on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on
discs or titles.
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
4
Operating
a Title – current title number/total number of
titles
b Chapter – current chapter number/total
number of chapters
c Time – elapsed playing time/total playback
time
d Audio – selected audio language or channel
e Subtitle – selected subtitle.
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect Ratio
h Picture Mode – selected picture mode
44 Operating
Playing from selected time
eroy
Hearing a different audio
eroy
1. Press INFO/MENU (m) during playback. The
time search box shows the elapsed playing
time.
1. During playback, press INFO/MENU (m) to
display the On-Screen display.
2. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press A/D to skip the playback 60 seconds
forward or backward.
3.Press ENTER (b) to start playback from selected
time.
,,Note
yy This function may not work on some disc or
titles.
4
yy This function may not work depending on
the file type and ability of the DLNA server.
Operating
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m) to
display the On-Screen display.
2.Use W/S to select the [Subtitle] option.
3.Use A/D to select desired subtitle language.
4. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change subtitle
selections only via the disc menu. If this is
the case, press TITLE/POPUP or DISC MENU
button and choose the appropriate subtitle
from the selections on the disc menu.
yy You can select the [Subtitle] option on the
On-Screen display directely by pressing
SUBTITLE button.
2.Use W/S to select the [Audio] option.
3.Use A/D to select desired audio language,
audio track or audio channel.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POP-UP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
yy You can select the [Audio] option on the
On-Screen display directely by pressing
AUDIO button.
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press INFO/MENU (m) to
display the On-Screen display.
2.Use W/S to select the [Angle] option.
3.Use A/D to select desired angle.
4. Press BACK (1) to exit the On-Screen display.
Operating 45
Changing the TV Aspect Ratio
eoy
Changing the Picture Mode
eroy
You can change the TV aspect ratio setting while
playback.
You can change the [Picture mode] option while
playback.
1. During playback, press INFO/MENU (m) to
display the On-Screen display.
1. During playback, press INFO/MENU (m) to
display the On-Screen display.
2.Use W/S to select the [TV Aspect Ratio]
option.
2.Use W/S to select the [Picture Mode] option.
3.Use A/D to select desired option.
4. Press BACK (1) to exit the On-Screen display.
4. Press BACK (1) to exit the On-Screen display.
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Setup] menu is
not changed.
3.Use A/D to select desired option.
Setting the [User] option
1. During playback, press INFO/MENU (m) to
display the On-Screen display.
2.Use W/S to select the [Picture Mode] option.
3.Use A/D to select the [User setting] option,
and press ENTER (b).
Changing subtitle code page
y
4
Operating
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press INFO/MENU (m) to
display the playback menu.
2.Use W/S to select the [Code Page] option.
3.Use A/D to select desired code option.
4.Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
5.Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
4. Press BACK (1) to exit the On-Screen display.
46 Operating
Radio Operations
Be sure that the antennas are connected.
(Refer to the page 19)
Listening to the radio
1. Press FUNCTION until TUNER (FM) appears in
the display window. The last received station is
tuned in.
4
Deleting a saved station
1. Press PRESET (- / +) to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected preset
number.
Deleting all the saved stations
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change. Scanning stops when the unit tunes in
a station. Or Press TUNING (-/+) repeatedly.
Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up. Press CLEAR again. Then all
the saved stations are deleted.
3. Adjust the volume by pressing VOL (+/-).
Improving poor FM reception
Presetting the Radio Stations
Press B (blue) (MONO/STEREO) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
Operating
1. Press FUNCTION until the TUNER (FM) appears
in the display window.
2. Select the desired frequency by using TUNING
(-/+).
3. Press ENTER (b) a preset number will flash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
See information about a radio
station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS repeatedly
to cycle through the various data types:
PS
(Programme Service Name)
The name of the channel will appear in
the display
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT
(Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time and date as
broadcast by the station.
5. Press ENTER (b). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Operating 47
Using the Premium
Using the LG Apps
You can use various content services via Internet
with the Premium feature.
You can use the LG application services on
this player via Internet. You can easily find and
download various applications from LG App store.
1. Check the network connection and settings
(page 22).
2.Press HOME ( ).
3. Select the [Premium] using A/D, and press
ENTER (b).
Depending on the region, the LG Apps service
may not be available at the moment. The
service will become available in these regions
through at software update.
1. Check the network connection and settings
(page 22).
2.Press HOME ( ).
4. Select an on-line service using W/S/A/D,
and press ENTER (b).
3. Select the [LG Apps] using A/D, and press
ENTER (b).
,,Note
4
yy The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most upto-date information.
yy When you are first time to access [Premium]
or [LG Apps] feature, current country setting
appears. If you want to change the country
setting, select [EDIT] and press ENTER (b).
4. Select a category using A/D, and press ENTER
(b).
5.Use W/S/A/D to select an application, and
press ENTER (b) to display the information.
6. Press ENTER (b) while [Install] icon is
highlighted. The application will be installed to
the player.
To install an application to the player, user
needs to sign in. Refer to page 48 for more
information of signning in.
7. Press yellow (Y) colored button to display the
[My Apps] screen.
8. Select the installed application and press ENTER
(b) to excute it.
,,Note
To install a paid application, you need to be
a paid member. Visit www.lgappstv.com for
more information.
Operating
yy Detailed information of each service,
contact to the content provider or visit
suppot link of the service.
48 Operating
Signing in
Managing my Apps
To use the [LG Apps] feature, you need to sign in
with your account.
You can move or delete an installed application in
the [My Apps] menu.
1. On the [LG Apps] or [My Apps] screen, press red
(R) colored button.
Move an application
2. Fill the [ID] and [Password] field using the virtual
keyboard.
1. Select an application, and press green (G)
colored button to display the options.
If you do not have an account, press red (R)
colored button to register.
3.Use W/S/A/D to select [OK], and press
ENTER (b) to sign in with your account.
If you select the [Auto Sign In] check box,
your ID and password are remembered and
automatically signed in without entering them.
,,Note
4
yy If you want to sign in with other account,
press red (R) colored button on [LG Apps] or
[My Apps] screen, and select [Change User]
option.
Operating
yy To view the information of your account and
applications, press red (R) colored button on
[LG Apps] or [My Apps] screen, and select
[Account Setting] option.
2.Use W/S to select [Move], and press
ENTER(b).
3.Use W/S/A/D to select a position you want
to move to, and press ENTER (b).
Delete an application
1. Select an application, and press green (G)
colored button to display the options.
2.Use W/S to select [Delete], and press
ENTER(b).
3.Use A/D to select [Yes], and press ENTER (b)
to confirm.
Troubleshooting 49
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Insert the disc with the playback side down.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the movie file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is not operating
normally.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
5
Troubleshooting
The unit is plugged in, but the
power will not turn on or off.
50 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (see page 22).
yy Your broadband speed may not fast enough to use the BD-LIVE
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Setup] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
Your broadband service speed may not be fast enough to stream video
services. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
Media servers are not displayed yy The firewall or anti-virus software on your media server is running.
on the device list.
Turn off the firewall or anti-virus software running on your media
server.
yy The player is not connected to the local area network that your media
server is connected.
5
Access point is not displayed
on the “Access point name” list.
Troubleshooting
Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
Troubleshooting
51
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears
yy You are playing a disc recorded in a colour system that is different
from your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable with Ethernet).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Setup] menu is set to [Off ].
Set the option to [On].
Sound
5
Cause & Solution
There is no sound or the sound
is distorted.
yy The unit is in scan, slow motion, or pause mode.
yy The sound volume is low.
yy Check the speaker cable connection. (page 16)
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com/global/support or contact LG Electronics customer care centre.
Open source software notice
To obtain the corresponding source code under GPL, LGPL, MPL and other open source licenses, please
visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are
available to download with the source code.
Troubleshooting
Symptom
52 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
6
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
By pressing
You can
Samsung
6, 7
1 (TV POWER)
Turn the TV on or off.
Sony
8, 9
Switch the TV’s input source
between the TV and other
input sources.
Hitachi
4
AV/INPUT
PR/CH W/S
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV.
MUTE
Turn the TV’s volume on or
off.
,,Note
Appendix
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Appendix 53
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn off the player.
2.Use A/D to select a desired option and then
press ENTER (b).
Software Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 22)
2. Select [Software] option in the [Setup] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
[OK]
Starts the software update.
[Cancel]
Exits the update menu and turns
the power off.
6
If the software update is available from the update
server, the “Software Update” icon appears in the
Home menu. Press blue (B) colored button to start
the update procedure.
The player will check for the newest update.
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
Appendix
Option 2:
54 Appendix
4. If newer version exists, the message “Do you
want to download it?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?” appears.
8. Select [OK] to start updating. (Selecting [Cancel]
will end the update and downloaded file will
not be re-usable. To update software the next
time, the software update procedure has to be
started from the beginning again.)
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
9. When update is completed, the power will be
turned automatically in a few seconds.
10.Turn the power back on. The system now
operates with the new version.
6
,,Note
Appendix
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Centre then update your
player. Refer to “Customer Support” on page
51.
Appendix 55
About Nero
MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing movie, music and photo files stored on your
computer to this player as a DLNA-compatiable
digital media server.
,,Note
yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not
be inserted in this player or in any product
other than a PC.
yy The supplied Nero MediaHome 4 Essentials
CD-ROM is a customized software edition
only for sharing files and folders to this
player.
yy The supplied Nero MediaHome 4 Essentials
software does not support following
functions: Transcoding, Remote UI, TV
control, Internet services and Apple iTunes
System Requirements
Windows PC
yy Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7
(no Service Pack required), Windows® XP Media
Center Edition 2005 (Service Pack 2 or higher),
Windows Server® 2003
yy Windows Vista® 64-bit edition (application runs
in 32-bit mode)
yy Windows® 7 64-bit edition (application runs in
32-bit mode)
yy Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome standalone
yy 1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
yy Memory: 256 MB RAM
yy Graphics card with at least 32 MB video memory,
minimum resolution of 800 x 600 pixels, and 16bit color settings
yy Windows® Internet Explorer® 6.0 or higher
yy The supplied Nero MediaHome 4 Essentials
software can be downloaded at http://www.
lg.com/global/support. Find the download
link on the web page of this product.
yy DirectX® 9.0c revision 30 (August 2006) or higher
yy This manual explains operations with
the English version of Nero MediaHome
4 Essentials as examples. Follow the
explanation referring to the actual
operations of your language version.
yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
yy Network environment: 100 Mb Ethernet, WLAN
Macintosh
yy Macintosh computer with an Intel x86 processor
yy Memory: 256 MB RAM
6
Appendix
yy Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome standalone
56 Appendix
Installing Nero MediaHome 4
Essentials
Windows
Start up your computer, and insert the supplied CDROM disc into your computer’s CD-ROM drive. An
installation wizard will walk you through the quick
and uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as follows:
1. Close all Microsoft Windows programs and exit
any anti-virus software that may be running.
2. Insert the supplied CD-ROM disc into your
computer’s CD-ROM drive.
3. Click [Nero MediaHome 4 Essentials].
4. Click [Run] to start installation.
5. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
6. Click the [Next] button to display the serial
number input screen. Click [Next] to go to the
next step.
7. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without this
agreement.
8. Click [Typical] and click [Next]. The installation
process is started.
6
9. If you want to take part in the anonymous
collection of data, select the check box and click
the [Next] button.
Appendix
10.Click the [Exit] button to complete the
installation.
Mac OS X
1. Start up your computer, and insert the supplied
CD-ROM disc into your computer’s CD-ROM
drive.
2. Browse the CD-ROM drive and open the
“MediaHome_4_Essentials_MAC” folder.
3. Double-click the “Nero MediaHome.dmg” image
file. The Nero MediaHome window is opened.
4. In the Nero MediaHome window, drag the Nero
MediaHome icon either to the Applications
folder within the window or to any other
desired location.
5. You can now start the application by doubleclicking the Nero MediaHome icon in the
location you dragged it to.
Sharing files and folders
On your computer, you must share the folder
contained movie, music and/or photo content to
play them on this player.
This parts explains the procedure for selecting the
shared folders on your computer.
1. Double-click the “Nero MediaHome 4 Essentials”
icon.
2. Click [Network] icon on the left and define your
network name in the [Network name] field. The
Network name you enter will be recognized by
your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you want
to share. The selected folder is added to the list
of shared folders.
7. Click [Start Server] icon to start the server.
,,Note
yy If the shared folders or files are not displayed
on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
yy Visit www.nero.com for more information
and software tools
Appendix 57
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia SI
Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
LY Russian
LU Federation Vietnam RU Zimbabwe SA
SN
TH
VN
ZW
6
Appendix
58 Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
6
Appendix
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978 Korean 7579
Sanskrit 8365
Wolof 8779
6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
Esperanto Appendix 59
Trademarks and
Licenses
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
Java is a trademark of Oracle and/or its affiliates.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol
together are registered trademarks & DTS-HD
Master Audio | Essential is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
6
Appendix
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
60 Appendix
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2010
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix
Appendix
61
Audio Output Specifications
Jack/Setting
Source
Dolby Digital
HDMI OUT
PCM Stereo
PCM Multi-Ch
DTS Re-encode *3
BitStream *1 *2
PCM 2ch
PCM 2.1ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 2.1ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
PCM 2.1ch
DTS
Dolby TrueHD
DTS
PCM 2ch
PCM 2.1ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 2.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 2.1ch
PCM 2ch
PCM 2.1ch
DTS
Linear PCM 2.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 2.1ch
DTS
Linear PCM 7.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [BitStream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [BitStream].
yy With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not
be heard if the [Digital Output] option is set to
[BitStream].
yy If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
yy Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
yy This setting is not available on the input signal
from an external device.
6
Appendix
*3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[BitStream]).
yy The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD while playback.
62 Appendix
Specifications
General
Power requirements
Refer to main label on the side panel.
Power consumption
Refer to main label on the side panel.
Dimensions (W x H x D)
Approx. 360 X 6.05 X 297 mm
Net Weight (Approx.)
2.7 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Inputs/Outputs
VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector) x 1
ANALOG AUDIO IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL)
3 V (p-p), Optical jack x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack) x 1
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Power output (3 Ω/ 3 Ω), (RMS), THD 10 %
6
Appendix
Total
427 W
Front
141 W x 2
Sub-Woofer
145 W (Passive)
Appendix 63
System
Laser
Semiconductor laser
Wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
Frequency response
20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Harmonic distortion
Less than 0.05 %
Dynamic range
More than 80 dB
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Bus Power Supply (USB)
DC 5 V 0 500 mA
Speakers (BH6220C)
Front speaker (Left/ Right)
Type
1 Way 1 Speaker
Max. Input power
282 W
Impedance Rated
3Ω
Net Dimensions
(W x H x D)
88 x 197 x 79 mm
Input Power
141 W
Net Weight
0.6 kg
1 Way 1 speaker
Max. Input power
290 W
Impedance Rated
3Ω
Net Dimensions
(W x H x D)
133 x 352 x 325 mm
Input Power
145 W
Net Weight
4.8 kg
Subwoofer
Type
Speakers (BH6320C)
Front speaker (Left/ Right)
Type
2 Way 2 Speaker
282 W
150 x 266 x 150 mm
Impedance Rated
3Ω
Input Power
Subwoofer
Type
141 W
Net Weight
0.8 Kg
1 Way 1 speaker
290 W
Impedance Rated
3Ω
Max. Input power
Net Dimensions
(W x H x D)
Input Power
145 W
Net Weight
yy Design and specifications are subject to change without notice.
133 x 352 x 325 mm
4.8 kg
6
Appendix
Max. Input power
Net Dimensions
(W x H x D)
64 Appendix
Maintenance
Notes on Discs
Handling Discs
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Appendix 65
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.