Download Panasonic SC-HTB20
Transcript
SC-HTB20EBEGGNGS~ESG_mst.fm 5 ページ 2012年3月7日 水曜日 午前11時18分 Quick Start Guide Home Theater Audio System SC-HTB20 Step 1: Choose in the configuration that is right for you Place the speakers horizontally Place the speakers vertically To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. 2 1 2 1 Front view 1 4 3 2 Push Insert the wire fully while pushing the lever. r: White s: Blue line Rear view Insert the wire fully while pushing the lever. r: White s: Blue line Push Push Pull the cable straight along the line and slide into the groove. ≥ Be sure to place the cable under the projecting part. ≥ Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with the speaker cable with a white connector on the observers’ left. VQC8935-1 until 2012/3/13 SC-HTB20EBEGGNGS~ESG_mst.fm 6 ページ 2012年2月27日 月曜日 午前9時19分 Step 2: Connect the cables Using this unit Do not connect the AC mains lead to the active subwoofer until all other connections are complete. When the TV is HDMI (ARC) compatible HDMI IN (ARC) TV Active subwoofer Be sure to connect to the TV’s ARC compatible terminal. (Refer to the TV’s operating instructions.) HDMI cable When the TV is VIERA Link “HDAVI ControlTM” or HDMI CEC compatible e.g. TV remote control HDMI (ARC) Audio Return Channel: Allows a home theater system to receive and play audio from the TV through a HDMI cable without additional wiring. Turn on the active subwoofer. Turn on the TV, and select this home theater system as the TV’s speakers from the VIERA Link menu. White AC mains lead Red ≥ If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”. To a household mains socket 110-127V• •220-240V VOLT ADJ Press [i VOL j] on the TV’s remote control to adjust the volume. (For South East Asia and the Middle East) Before connecting the AC mains lead, set the voltage. § Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed. ≥ For details about VIERA Link (HDMI), refer to page 24 of the operating instructions. When the TV is non HDMI (ARC) compatible OPTICAL OUT TV Active subwoofer HDMI IN Optical digital audio cable When the TV is not VIERA Link “HDAVI ControlTM” or HDMI CEC compatible HDMI cable is required for VIERA Link “HDAVI Control” e.g. TV remote control HDMI cable Turn on the active subwoofer and the TV. Press [TV] to select the TV sound. AC mains lead White Red To a household mains socket 110-127V• •220-240V VOLT ADJ (For South East Asia and the Middle East) Before connecting the AC mains lead, set the voltage. Press [i VOL j] to adjust the volume. ≥ If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to minimum. For wall mounting and other details, be sure to refer to the operating instructions.