Transcript
ACC 502 This kit contains a special penta-pinTM tool and ten M10 penta-pinTM screws for theft resistance. When assembling the TV Mount, use penta-pinTM screws in place of M10 socket head screws included with the TV Mount. FOR JUMBO 2000 ONLY: FOR A SECURE INSTALLATION A SLIGHT TILT IS REQUIRED. ACCESS HOLE ACC 502 This kit contains a special penta-pinTM tool and ten M10 penta-pinTM screws for theft resistance. When assembling the TV Mount, use penta-pinTM screws in place of M10 socket head screws included with the TV Mount. FOR JUMBO 2000 ONLY: FOR A SECURE INSTALLATION A SLIGHT TILT IS REQUIRED. SIDE VIEW TM ACCESS HOLE SIDE VIEW Jumbo 2000 models feature an access hole which exposes the head of one phillips screw on each side of the mount. For a secure installation the bracket must be set with at least enough tilt to prevent access to these screws. Jumbo 2000 models feature an access hole which exposes the head of one phillips screw on each side of the mount. For a secure installation the bracket must be set with at least enough tilt to prevent access to these screws. ISSUED: 6-11-98 ISSUED: 6-11-98 SHEET# 128-9015-2 01-09-07 ACC 502 This kit contains a special penta-pinTM tool and ten M10 penta-pinTM screws for theft resistance. When assembling the TV Mount, use penta-pinTM screws in place of M10 socket head screws included with the TV Mount. FOR JUMBO 2000 ONLY: FOR A SECURE INSTALLATION A SLIGHT TILT IS REQUIRED. ACCESS HOLE TM ACC 502 This kit contains a special penta-pinTM tool and ten M10 penta-pinTM screws for theft resistance. When assembling the TV Mount, use penta-pinTM screws in place of M10 socket head screws included with the TV Mount. FOR JUMBO 2000 ONLY: FOR A SECURE INSTALLATION A SLIGHT TILT IS REQUIRED. SIDE VIEW TM SHEET# 128-9015-2 01-09-07 ACCESS HOLE SIDE VIEW Jumbo 2000 models feature an access hole which exposes the head of one phillips screw on each side of the mount. For a secure installation the bracket must be set with at least enough tilt to prevent access to these screws. Jumbo 2000 models feature an access hole which exposes the head of one phillips screw on each side of the mount. For a secure installation the bracket must be set with at least enough tilt to prevent access to these screws. ISSUED: 6-11-98 ISSUED: 6-11-98 SHEET# 128-9015-2 01-09-07 TM SHEET# 128-9015-2 01-09-07