Transcript
Step 2. Installation of Power Supply Product is not warranted if the product is modified, altered or repaired without authorization by GIGABYTE. Specifications and pictures are to change without notice. Different motherboards have different installation areas specifications, screw holes and connectors. For detailed instructions, please refer to the motherboard user manual supplied by the motherboard manufacturer. Casing’s Internal Structure Step 5. Installation of Add-on Card 1 2 5.25” External Device Bay PCI Tool-less Fastener Motherboard Tray 3.5” Internal Device Bay Accessory Box Power Supply Step 3. Installation of Motherboard Motherboard Code name Step 6. Installation of 5.25” External Driver Bay Motherboard screw Case copper post ATX A1-A9 9 9 Micro ATX U1-U8 8 8 Flex ATX F1-F6 6 6 Mini ITX B1-B4 4 4 1 2 1 2 Accessory Box (Refer to the figures below for the attachments in the accessory box) Step 7. Installation of 3.5” Internal Driver Bay Wire clamp x 6 Buzzer x 1 Securing runner x 8 2.5” HDD securing screw x4 ODD securing screw x 10 PSU securing screw x 4 M/B securing screw x 9 Copper standoff x 9 FAN securing screw x 4 Thrumb screw x 4 Cable Kit (Refer to the figures below for the cable connectors) Step 4. Installation of Front I/O HD Audio +AC’97 Front light control 4-pin power connector Power SW / Power LED Reset SW / HDD LED Step 1. Removal of Front Panel HD AUDIO Audio Set (HD & AC’97) USB 3.0 GND 1 -ACZ_DET FSENSE1 KEY FSENSE2 3 5 7 9 GND 1 AC'97 USB 3.0 2 MIC2_L 4 6 8 10 MIC2_R LINE2_R FAUDIO_JD LINE2_L 2 MIC NC 3 4 MIC Power NC 5 KEY 7 NC 9 6 Line Out(R) 8 NC 10 Line Out(L)
