Transcript
Hook & loop strap to hold the hood in place Flexible sleeve with strong elastic cuff protects viewfinder Clear vinyl panel on camera control side with full access from bottom R A I N C O V E R S for Full Size Camcorders RC-1* Wt. 0.99 lbs 0.45 Kg ORDER CODE KT / VA-801-1 Two modular removable sleeves enable the extraction of Shoulder Strap, wireless antenna, viewfinder* etc. SPS Sungun Protective Sleeve, can be easily added and adjusted (sold separately) Hook & loop seams on top provides easy access allowing full access to playback controller and cassette door. Extra nylon sleeves that can be closed around and seal the lens, m a t t b o x , viewfinder, or microphone base for double protection Materials Crystal clear vinyl window High density dense nylon fabric, treated with 3 layers of PU component coating Polypropylene shield Fastex-ITW® nylon or acetal buckles 12.2 31 cm Roomy bottom opening provides easy access and allows hands to move comfortably The Rain Cover with its unique design is fabricated from waterproof material with a crystal clear vinyl panel on the cameras control side. The cover slips quickly over a camera to protect it from sudden showers and is secured by a quick pull of the fore and aft drawstrings. A stiff polypropylene hood shields the lens, while the viewfinder is protected by a flexible sleeve with a strong elastic cuff. The Rain Cover successfully protected equipment during severe weather conditions. The Rain Cover id designed for efficiency down to the smallest detail. dimensions Maximal dimensions of camera and accessories that fit in RC-1: 30 76 cm SPS* ORDER CODE KT / VA-801-SPS Hook & loop strap to roll the back part of the raincover while working with small battery or external one with connection to wire Flexible string to close back part provides easy access to the battery Double sided hook & loop bottom can be closed for use in two ways: 1. One on top of the other - for use on shoulder 2. Side to side - wrapped around tripod KATA's SPS Sungun Protective Sleeve is a modular hood designed to protect various sized mini-lights when working in the rain. Made with an inner layer of Aramid weave the SPS is heat resistant. RC-5 VFP* ORDER CODE KT / VA-820-101 RC-5 VFS* ORDER CODE KT / VA-820-102 KATA's RC-5VFP (Philips) and RC-5VFS (Sony) is designed to protect the VF mounted on the camera against rain, dust and sun (can be added to RC-1, 10). The rounded shape of the RC's roof directs the rain to the sides and the extra length protects against dampness from below or from the sides. Clear vinyl window to view Tally light Clear vinyl panel on camera control side, Can be folded when necessary *SOLD SEPARATELY Development & production by KATA. Double sided hook & loop stiff polypropylene hood can be adjusted to fit a variety of lens configurations from the basic round lenses to the box lenses * RC-5 Viewfinder Rain Cover, can be easily added and adjusted (sold separately) POB 45078 Jerusalem , Israel 91450 Tel: +972-2-5911000 Fax: + 972-2-5400504 www.kata-bags.com Info: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 240303. Sales: [email protected] KATA. A SIMPLE CASE OF BETTER DESIGN.
