DMRBW880&780EB-VQT2J65_eng.book 64 ページ ２０１０年４月８日 木曜日 午後３時５９分 Recording from external equipment Recording broadcasts from Set Top Box Recording disc: [HDD] Recording mode: XP, SP, LP, EP Recording disc: [HDD] Recording mode: XP, SP, LP, EP ≥Connect the Set Top Box (> 9). ≥Connect the equipment with AV2 input terminal (> 9). ≥Set “AV2 Input” and “Ext Link” (> 83). ≥Make timer programming on the external equipment. 1 2 3 4 5 With Other Equipment Linked timer recording (SKY Digital STB, etc.)–EXT LINK While stopped Press [INPUT SELECT] to select the input channel. Press [REC MODE] to select the recording mode. 1 Select the channel on the other equipment. To cancel the External link 1 Turn on this unit. 2 Press [EXT LINK] to stop recording or to cancel linked timer recording standby. (“EXT-L” disappears.) Press [¥ REC]. Recording starts. Set the time to record. (> 21) To skip unwanted parts Press [;] to pause recording. ≥Press again to restart recording. To stop recording Press [∫]. ≥ It will be recorded in standard definition quality even if the programme is in high definition quality. 64 VQT2J65 Press [EXT LINK]. ≥“EXT-L” lights on the unit’s display ≥ It will be recorded in standard definition quality even if the programme is in high definition. ≥ During Ext Link Standby mode or recording, you cannot select external input other than AV2. ≥ This function does not work when “TV System” is set to “NTSC” (> 82). ≥ This function does not work while recording 2 programmes simultaneously with timer recording. ≥ The beginnings of recordings may not be recorded correctly in some cases. ≥ Programmes are recorded as one title on this unit when the end time of the earlier timer recording and the start time of the later timer recording are close to each other. To divide the titles, go to “Divide Title” (> 41). ≥ When “EXT-L” lights on the unit’s display, Direct TV Recording is unavailable.