Download Panasonic DMR-BW780EFK

Transcript
67 ページ 2010年4月8日 木曜日 午後3時59分
When “DLNA Function” is deactivated
make the following settings.
To register equipment manually
After selecting “Manual” in step : (> left)
1 While stopped
Press [FUNCTION MENU].
2 Select “Others”, then press [OK].
3 Select “Setup”, then press [OK].
4 Select “Network”, then press [OK].
5 Select “Network Settings”, then press [OK].
6 Select “Home Network ( DLNA ) Settings”, then
press [OK].
1 Select “Named devices” or “Unnamed devices”,
then press [OK].
Named
devices
Four Panasonic DLNA
compatible equipment can be
registered.
≥Even if it is Panasonic
equipment, you may not be able
to register from “Named
devices”. In this case select
“Unnamed devices”.
Unnamed
devices
12 non-Panasonic DLNA
compatible equipment can be
registered.
Home Network (DLNA) Settings
Home Network (DLNA) function
On
Setting device name
Registration type for remote devices
Named devices
Automatic
Unnamed devices
OK
RETURN
7 Select “Home Network ( DLNA ) function”, then
press [OK].
8 Select “On”, then press [OK].
≥“Power Save in Standby” in the Setup is set to
“Off”. (> 84)
9 Select “Registration type for remote devices”, then
press [OK].
: Select “Automatic” or “Manual”, then press [OK].
Automatic
Manual
All connected devices on the
same network can access this
unit.
4 Panasonic DLNA compatible
equipment and 12 NonPanasonic DLNA compatible
equipment will be automatically
registered.
≥Equipment registered earliest
will be deregistered when the
5th Panasonic DLNA compatible
equipment or 13th NonPanasonic DLNA compatible
equipment is connected to this
unit.
≥Ensure that the router for your
home network has adequate
security system to prevent
unauthorized access.
2 Named devices
Select “Add new device” then press [OK].
Unnamed devices
Select the MAC Address for the connected
equipment, then press [OK].
3 Select “Yes”, then press [OK].
4 Access this unit from the connected DLNA
compatible equipment within 10 minutes.
To deregister equipment
After selecting “Manual” in step : (> left)
1 Select “Named devices” or “Unnamed devices”,
then press [OK].
2 Select the equipment, then press [OK].
3 Select “Yes”.
To set the name of this unit for displaying on the
connected equipment
After performing step 8 (> left)
Convenient functions
DMRBW880&780EB-VQT2J65_eng.book
1 Select “Setting device name”, then press [OK].
2 Select “Select from a preset list” or “Create name”,
then press [OK].
3 Select from a preset list
Select the preset name, then press [OK].
4 Create name
Enter the name. (> 74, Entering text)
Select the devices to register.
(> right, To register equipment
manually)
67
VQT2J65