Transcript
MICROPHONE MICPACB-D / MICPACB-X This APart paging microphone is a sturdy high quality CB-type microphone. It is convenient for fixed on-wall use, or in combination with car- or mobile amplifiers. The special microphone capsule is designed for clear voice reproduction while close talking. This allows clear announcements done in noisy environments. The MICPACB has also a switched contact for activating a CHIME or other actions such as PRIORITY. The APart amplifier range has several models which can be directly operated by this MICPACB. Technical Specifications ● Type : CB ● Polar pattern : Omni-directional ● Frequency range : 100 Hz - 8 kHz ● Sensitivity : 2.5 mV/PA @ 1 kHz ● Rated output impedance : 300 Ohm ● Switch : Push to talk switch Schematic MICPACB-D WWW.APART-AUDIO.COM MICPACB_Manual.indd 1 ● Cable Type : 3 wire + screen ● Cable length : 0.5 m (1.5 m extended) ● Connector : 5 pole DIN or 5 pole XLR ● Colour : grey ● Weight (incl. cable) : 0.18 kg ● Dimensions 90 (h) X 60 (w) X 47 (d) mm Schematic MICPACB-X [email protected] 2/4/09 10:28:19 AM
