Transcript
Installation instruction Part No: ns1254.3 EAN-Code: 40 21188 00092 3 ARAT Navigation mount for Mercedes Actros MP2 ´03... for Mercedes Atego ´05... Location of Airvent assembly Casing lip course of Screw B Airvent assembly Screws A Storage tray Drill Ø 6mm fitment piece Screw B Installation instruction - Remove the airvent assembly (secured with spring clips) from its housing in the dashboard - Place the fitment piece of the Navi-mount to the contours of the storage tray Navi-mount - Mark and drill (Ø 6mm) in the side wall of the storage tray - Secure the Navi-mount with the supplied screws A ( 4.2 x 25mm / 2 pcs) through the rear wall of the airvent housing (pre-drill Ø 2,5mm) - Replace the airvent assembly complete with the Navi-mount into position - From the side secure the Navi-mount with the supplied screw B ( 5 x 100mm / 1 pce) into the casing lip behind the dashboard ARAT Germany - Tel: +49-5207-8952-52 - Fax: +49-5207-8952-68 - Email: [email protected] - www.arat.de ARAT Austria - Tel: +43-4732-37280 - Fax: +43-4732-372804 - Email: [email protected] - www.arat.de