Transcript
MODEL SG610 Imitation Indoor / Outdoor Surveillance Camera English Version 1.0 THIS PACKAGE CONTAINS: 1 x Imitation Camera 1 x Screw and Anchor Pack FEATURES • Realistic Imitation CCTV Surveillance Bullet Camera • Uses Genuine Metal Camera Body • Ideal For Indoor/Outdoor Use Imitation Camera with Stand Screw & Anchor Pack The Lorex Imitation Surveillance Camera is an affordable and effective theft deterrent device. It looks like a real surveillance camera with imitation lens and imitation infrared LEDs. Mount the Imitation Surveillance Camera in a visible area on a ceiling or wall to deter possible thieves and intruders. INSTALLING THE IMITATION SURVEILLANCE CAMERA 1. Installing the Camera: • The Camera and short cable are firmly attached to the base. 1. Camera • Drill 1 inch holes in the marked positions for the 3 screw holes. • If necessary, insert the supplied drywall anchors into the screw holes. • Insert a 1 inch screw (provided) through each of the three (3) screw holes in the mounting base plate and into the mounting surface, then tighten the screws. 2. Position the camera by loosening the thumbscrew, moving the camera to the desired angle, and securing the thumbscrew to hold the camera position. CAMERA CARE: Handle the Imitation Surveillance Camera carefully; do not drop it. Wipe the camera with a damp cloth occasionally to keep it looking new SPECIFICATIONS Weight 0.45 lbs / 0.21 kg Dimensions: (W x H x D ) 2.1“ x 3.6”x ” x 4” 53mm x 90mm x 100mm 2. Ceiling / Wall