Transcript
S P E C F I L E ET-PKD100S Ceiling mount bracket for low ceilings Description This ceiling mount bracket is to be used when mounting Panasonic projectors to the ceiling. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W x H x D): +5°, -5° ±2.5° ±2.4° 507 x 151 x 425 mm (19-31/32˝ x 5-15/16˝ x 16-23/32˝) 8.1 kg (17.9 lbs) Weight: Weights and dimensions shown are approximate. Specifications subject to change without notice. Parts Attachment plate . . . . . . . . . . . . . Projector mount bracket . . . . . . . Angle adjuster . . . . . . . . . . . . . . . Washer-fitted hex bolts (M6 x 25) Washer-fitted hex bolts (M6 x 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . 1 . 1 . 5 10 Caution: Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has sufficient strength. Read the enclosed mounting instructions thoroughly before starting. Dimensions Illustration shows the ET-PKD100S attached to the projector. Attachment plate 284 (11-3/16˝) 218 (8-19/32˝) 109 285 (11-7/32˝) (4-9/32˝) 316 (12-7/16˝) Attachment plate 107.5 (4-7/32˝) Projector 215 (8-15/32˝) 142 (5-19/32˝) 260 (10-1/4˝) 107.5 (4-7/32˝) unit : mm (inch) NOTE: This illustration is not drawn to scale. As of December 2006 < 1 >