Transcript
Step 1 First slide the earcups upwards to make the headphones as compact as possible. Step 2 Holding the headphones with the left side (marked L) in the left hand and the right side (marked R) in the right hand, turn the earcups inwards, away from you, thus “flattening” the headphones. Step 3 Now fold the headphones inwards starting first with the left side followed then by the right side. Step 4 There’s a notch cut into the side of each headband. Match the notches up and lock them into place. (If they don’t lock, you’ve probably folded the wrong side first. Try again, starting with the other side). Step 5 To protect them safely when travelling, carefully slip them into the case, headband first, with the ear pads facing down towards the black underside of the case. Turn the case over, pull the cable toggle up, curl the cable over the plastic clip and wrap around the case. You’ll find a convenient alignment groove at the back to help you. Don’t forget to tuck the plug securely in and then close the case.