Transcript
PRODUCT SET-UP: 1. Connect the Twin Charger AC adapter to the DC input located on the back of the main charging unit. Connect the other end to any standard wall outlet. 2. The Twin Charger includes iPod/iPhone brackets for some of the latest iPod/iPhone models, choose the corresponding brackets and place them on to the Twin Chargers charging wells. If you cannot locate a bracket for your iPod/iPhone model then choose a bracket that best secures your iPod/iPhone onto the Twin Charger. Note: all iPod models ship with a bracket, the bracket that was included with your original iPod purchase is fully compatible with the Twin Charger. 3. Connect 1 or 2 iPod/iPhone models to the Twin Charger by placing them onto the charging pin located on top of the Twin Charger, charging will begin automatically. Please refer to your original iPod/iPhone instruction manual for charging times. Charge status can be viewed on the unit being charged. 4. The Twin Charger features eye pleasing LED illumination. The LEDs will automatically illuminate whenever a iPod/iPhone is connected to the Twin Charger. 5. The Twin Charger features a LED “ON” and “OFF” switch located on the back of the main unit. This switch is used for switching the LEDs “ON” and “OFF”. www.isound.net FOR TECHNICAL SUPPORT PLEASE CONTACT: 1-877-999-DREAM or [email protected]
