Transcript
HARMONY i.Sound™ Harmony Instructions: The i.Sound™ Harmony 2.1 Speakers are designed to provide you with a sound experience like nothing you have heard before. Utilizing flat speaker technology, the Harmony 2.1 Speakers are able to create full size speaker sound quality in a wafer thin design. 1. Open the battery compartment located on the back of the speaker and insert 4 “AAA” batteries. 2. The i.Sound™ 2X Speakers feature brackets for different models of iPod . Locate the bracket that matches your iPod model and connect to the front bottom of the 2X speakers by simply pressing it into the 2 holes located at the front bottom of the 2X Speaker system. Box Contents ~ 2 Flat Speakers ~ 1 Subwoofer ~ 2 Speaker Connection Cables ~ iPod Stand (with multiple iPod brackets) ~ i.Sound™ 2X Portable Speaker System ® i.Sound™ 2X Instructions: ® ® ® 3. Move the power switch located on the top of the speaker to the on position. The LED will confirm the speaker is powered on. i.Sound™ Harmony Set-Up: 1. Remove the speakers and subwoofer from the packaging. 4. Unwind the audio cable located around the 2X speaker. 2. Connect the speakers to the subwoofer by plugging in the white and red connection cables to the rear of the subwoofer. Make sure to connect the red cable to the red input on both the subwoofer and the speaker. Follow the same procedure for the white connection cable. 6. The volume is controlled by adjusting the volume on your iPod 3. Locate the power plug on the back of the subwoofer and plug it in to any standard wall outlet. 7. The i.Sound™ 2X Speakers are also compatible with any other audio device that features a standard headphone jack output. 4. When using the Harmony Speakers with iPod , you can use the included iPod stand for displaying your iPod . The iPod stand features different brackets to fit the iPod model you are using. 8. For connecting other audio devices, follow the same procedures for connecting an iPod . ® ® ® ® 5. With your iPod in place simply connect the audio cable from the 2X speaker to your iPod headphone jack. ® ® ® ® ® 5. To connect an iPod or any other audio device that features a standard headphone output, simply locate the audio out cable on the back of the Harmony subwoofer and connect it to your audio device of choice. ® 6. Power on the Harmony Speaker by pressing the power button located on the back of the subwoofer to the on position. Note: Although the 2X Speaker System is designed to work with all audio devices with a standard headphone jack output, audio devices other than iPod may not fit in the 2X iPod bracket. ® ® FOR TECHNICAL SUPPORT PLEASE CONTACT: 1-877-999-DREAM or visit us on the web @ 7. Power on your audio device and you are ready to experience a new level in sound quality. www.dreamgear.net www.isoundusa.com 8. Volume and bass settings can be adjusted using the volume and bass controls located on the side of the Harmony subwoofer. Make sure the volume on your audio device is turned up. Trademark of New Transducers Limited P O B ox 4 7 8 Torrance, CA 90508
