Download Philips CD6550B Digital cordless phone handset

CD6550_QSG_EN.fm
Page 1
Tuesday, April 14, 2009
5:29 PM
Register your product and get support at
www.philips.com/welcome
Call from the phonebook
Welcome to Philips!
2. Scroll : to a phonebook entry.
Register your product and get support at
www.philips.com/welcome
1. Press d in idle mode.
3. Press r or v key.
CD6550
Need help?
The call is initiated.
Troubleshooting
User Manual
For more information, please refer to the User Manual that came with your
phone.
Online help
Problem
Solution
• There’s no dialling tone!
• Check the connections
• Charge the batteries
• Use the line cable provided
• Caller cannot hear me
clearly!
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
• SEARCHING... is
displayed on handset and
• Move closer to the base station
• Reset your unit and restart the handset registration
Refer to the User Manual that came with your new phone.
www.philips.com/support
icon is blinking!
• Caller number is not
displayed!
Quick start guide
• Check your subscription with your network
operator
©2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the written
consent of the copyright owner.
Document number: 3111 285 50381 (EN)
Printed in China
1
Connect
2
Install
3
Enjoy
CD6550_QSG_EN.fm
Page 2
Tuesday, April 14, 2009
5:29 PM
What’s in the box
1
Connect
3
Connect the charger
1. Place the charger in a central location near the electricity socket.
Enjoy
Make a call
Dial the number (maximum 24 digits) and press r or v key.
OR
Press r or v key to take the line and dial the number (maximum 24 digits).
Answer a call
When the phone rings, press r or v key.
Handset
Charger
End a call
Battery door
To end a conversation, press e key.
Adjust earpiece volume
2. Connect the power cable to their corresponding connectors at the bottom of the
charger as shown.
2 AAA rechargeable
NiMH batteries
Power supply
User manual
2
A
During a call, press : to select from VOLUME 1, VOLUME 2 or VOLUME 3.
Set the ring melody
M in idle mode, scroll : to PERSONAL SETTING and press
mSELECT, scroll : to HANDSET TONES and press mSELECT, scroll :
to RING TONES and press mSELECT.
Scroll : to your desired melody to play the melody.
Press mSELECT to set the ring melody.
1. Press
Install
Insert rechargeable batteries and charge
B
Insert batteries
Charge handset for 24 hours
2.
3.
A validation tone is emitted and the screen returns to previous menu.
Guarantee
Quick Start Guide
Store a contact in the phonebook
1. Press M key in idle mode, scroll : to PHONEBOOK and press mSELECT,
press mSELECT to enter NEW ENTRY.
Registering your additional handset
Additional handsets must be registered to the base station before you can use them.
1. On the base station, press and hold p for approximately 5 seconds.
M key on the handset. Scroll : to ADVANC.
mSELECT, scroll : to REGISTRATION and press
2. Within 10 seconds, press
SETTINGS and press
mSELECT.
3. Enter the master PIN (default is 0000) when prompted and press mOK to confirm.
4. WAITING_ _ is displayed on the screen.
2. ENTER NAME is displayed on the screen.
3. Enter the name of the contact (maximum 14 characters) and press mOK.
4. Enter the phone number (maximum 24 digits) and press mOK.
A validation tone is emitted.
Access the phonebook
1. Press d in idle mode and scroll : to browse the phonebook.
2. To view the details, press mSELECT.