Transcript
Wiring Tools User’s Guide StarTech.com has the tools you need to get any cable job finished, including the DUCTCUTTER, our sharp solution for cutting through, you guessed it, plastic wiring ducts. This StarTech.com tool is specially designed for manipulating RJ-45 and RJ-11 connectors and saves valuable time and effort on any related cable job. RJ45 and RJ11 Strip & Crimp Tool RJ4511TOOL 1. Hold the RJ4511TOOL with “Safety” side towards you. Insert the cable you wish to cut in the cutter section of the tool. Squeeze handles together to cut the wire. Modular Plug Holder for 8 Position Use 2. Take the newly cut end and place it in the stripper section of the tool. For a longer strip to remove place the end of the cable at the backstop, for a shorter strip place it at the tab. Squeeze handles together and release slightly. Pull off the stripped insulation. 3. Insert the cable and outer jack into the appropriate modular plug holder. Squeeze handles firmly. Release and remove the terminated plug. Openning the Tool: Squeeze hanle firmly. The lock will release. The tool is now ready to be used. Lock Modular Plug Holder for 6 Position Use Stripper Locking the Tool: Squeeze handles together with one hand. Push the lock in with the other hand and release the handles. The tool is now secured. Cutter Safety Handles
