Download Ergotron 100 Series Double Pivot

User's Guide
100 Series Flat Panel Monitor Pivots
Vertical Surface, Direct Mount
a
b
A
B
a
b
1
4X
4X
#8-32 x 3/8"
#8-32 x 5/16"
4x
4x
1x
#8-32
4x
2
M4 x 10mm
M4 x 10mm
75-100mm
1/2"
1x
3/32"
1/2"
2
1
888-47-019-02 rev. N • 03/09
1 of 8
1 Determine Ergonomic Mounting Height
ERGONOMICS
Ergonomic Mounting Heights
Ergotron USA 1-800-383-1916
Ergotron Europe +31 20 312.29.39
(for Flat Panel Monitors and Keyboards)
3
FIND YOUR MOUNTING APPLICATION
Overview
When mounted properly, Ergotron
ARMS™ will provide ergonomic monitor
viewing and keyboard operation for a
wide range of users - whether sitting,
standing or in sit/stand situations.
2
The dimensioned drawings and formulas
contained in this guide can be used to
determine the ergonomically correct
mounting height of any of Ergotron's
Flat Panel Monitor/Keyboard solutions
mounted to either a vertical or a
horizontal surface. If mounting above
a worksurface, mounting heights may
change due to various worksurface
heights.
2
3
3
4
5
The Anthropometric Table on page
10 shows how mounting heights are
calculated based on the eye and elbow
heights of male and female operators.
To Mount your Flat Panel Monitor or Keyboard at an ergonomically
correct height, start at step 1 and continue as directed.
2
6
1
6
6
7
7
1
FIND "x" =
Distance between Center line of Mounting Holes and Top of Monitor Screen.
HD Laptop
Tray
Applications mounted to a
horizontal surface
Center
Line of
mountings
hole
X
X
Top
of
Screen
8
8
9
2
1
Back View
Side View
Applications mounted to a 1.5" pole
Front View
2
USE "x"
9
to calculate mounting height for your application.
Rev E. 12/02
1 of 10
9
888-99-014-02
888-99-014
2 Determine Mounting Configuration
!
WARNING
Because surfaces vary widely and the ultimate mounting method is out of Ergotron’s control, it is
imperative that you consult with appropriate engineering, architectural or construction professional
to ensure that your Ergotron mounting solution is mounted properly to handle applied loads.
1.062"
(26.97mm)
1.062"
(26.97mm)
888-47-019-02 rev. N • 03/09
2 of 8
3 Mount Pivot
a
4X
b
#8-32 x 5/16"
4X
#8-32 x 3/8"
4 Attach Monitor
a
+
b
c
d
75 mm
100 mm
4
X mm
5
888-47-019-02 rev. N • 03/09
3 of 8
!
If your monitor uses a screw size other than M4 x 10mm,
DO NOT use the M4 x 10mm screws or knob provided as
they could result in damage to the monitor.
c
75 mm
M4 x 10 mm
M4 x 10 mm
4x
d
4x
#8-32
100 mm
3/32"
M4 x 10 mm
M4 x 10 mm
4x
888-47-019-02 rev. N • 03/09
4 of 8
5 Tilt Motion
Tilt monitor up and down through entire pivot range of motion. If it does not stay in place or
movement in one direction is stiff, pivot needs adjustment - see below. Adjust until monitor
stays in place and tilting forces, up or down, are equal.
Adjust Tilt
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
1/2"
1/2"
6 Side-to-Side Motion
Move monitor side-to-side through entire range of motion. If it does not stay
in place at any point it will need adjustment - see below. Adjust so side-to-side
moving forces are equal.
Adjust Side-to-Side
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
1/2"
1/2"
888-47-019-02 rev. N • 03/09
5 of 8
7
Portrait/Landscape
Rotate monitor from Portrait to Landscape through entire range of motion. If
it does not stay in place or movement in one direction is stiff, tension needs
adjustment - see below. Adjust until monitor stays in place and tension,
portrait to landscape, is equal.
Adjust Portrait/Landscape
1/2"
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
8
888-47-019-02 rev. N • 03/09
6 of 8
? Troubleshooting
Symptom
Probable Cause
Pivot Tension needs adjustment.
Solution
8 Tilt Motion
6
Monitor tilts up and down too
easily or with difficulty.
Monitor exceeds weight capacity*.
Monitor moves side-to-side too
easily or with difficulty.
Pivot Tension needs adjustment.
Side-to-Side
9 Motion
5
Monitor rotates from portrait
to landscape too easily or with
difficulty.
Pivot Tension needs adustment.
10 Portrait/
Landscape
5
* Weight Capacities:
5 - 25 lbs
(2 - 11.4 kgs)
5 - 23 lbs
(2 - 10.5 kgs)
888-47-019-02 rev. N • 03/09
7 of 8
888-47-019-02 rev. N • 03/09
8 of 8