Download VGN-FE series

N
User Guide
Personal Computer
VG N - F E s e ri e s
n 2 N
Contents
Before Use .........................................................................................................................................................................6
Notice ...........................................................................................................................................................................6
ENERGY STAR ...............................................................................................................................................................7
Documentation .............................................................................................................................................................8
Ergonomic Considerations .........................................................................................................................................12
Getting Started .................................................................................................................................................................14
Locating Controls and Ports.......................................................................................................................................15
About the Indicator Lights ..........................................................................................................................................22
Connecting a Power Source ......................................................................................................................................24
Using the Battery Pack ..............................................................................................................................................26
Shutting Down Your Computer Safely .......................................................................................................................31
Using Your VAIO Computer .............................................................................................................................................32
Using the Keyboard ...................................................................................................................................................33
Using the Touch Pad .................................................................................................................................................35
Using Special-function Buttons ..................................................................................................................................36
Using the Built-in MOTION EYE Camera...................................................................................................................37
Using the Optical Disc Drive ......................................................................................................................................38
Using PC Cards .........................................................................................................................................................47
Using the ExpressCard Media ...................................................................................................................................50
Using the Memory Stick Media ..................................................................................................................................53
Using Other Memory Cards .......................................................................................................................................58
n 3 N
Using the Internet.......................................................................................................................................................61
Using Wireless LAN (WLAN) .....................................................................................................................................62
Using the Bluetooth Functionality ..............................................................................................................................70
Using Peripheral Devices.................................................................................................................................................77
Connecting a Multi Function Bay Docking Station .....................................................................................................78
Connecting External Speakers ..................................................................................................................................86
Connecting an External Display .................................................................................................................................87
Selecting Display Modes............................................................................................................................................95
Using the Multiple Monitors Function .........................................................................................................................96
Connecting an External Microphone ..........................................................................................................................98
Connecting a Universal Serial Bus (USB) Device......................................................................................................99
Connecting a Printer ................................................................................................................................................102
Connecting an i.LINK Device ...................................................................................................................................103
Connecting to a Network (LAN) ...............................................................................................................................105
Customizing Your VAIO Computer ................................................................................................................................107
Setting the Password ...............................................................................................................................................108
Setting Up Your Computer with VAIO Control Center..............................................................................................110
Using the Power Saving Modes ...............................................................................................................................111
Managing Power with VAIO Power Management ....................................................................................................116
Configuring Your Modem .........................................................................................................................................118
Upgrading Your VAIO Computer....................................................................................................................................120
Adding and Removing Memory................................................................................................................................121
n 4 N
Precautions ....................................................................................................................................................................127
On Handling the LCD Screen ..................................................................................................................................128
On Using the Power Source ....................................................................................................................................129
On Handling Your Computer....................................................................................................................................130
On Using the Built-in MOTION EYE Camera...........................................................................................................132
On Handling Floppy Disks .......................................................................................................................................132
On Handling Discs ...................................................................................................................................................133
On Using the Battery Pack.......................................................................................................................................134
On Using Headphones.............................................................................................................................................135
On Handling Memory Stick Media............................................................................................................................135
On Handling the Hard Disk ......................................................................................................................................136
On Handling the Memory Card Adapter...................................................................................................................137
Troubleshooting .............................................................................................................................................................138
Computer .................................................................................................................................................................140
System Security .......................................................................................................................................................148
Battery......................................................................................................................................................................150
Built-in MOTION EYE Camera.................................................................................................................................152
Internet .....................................................................................................................................................................155
Networking ...............................................................................................................................................................157
Bluetooth Technology ..............................................................................................................................................160
CDs and DVDs.........................................................................................................................................................164
Display .....................................................................................................................................................................169
Printing .....................................................................................................................................................................173
Microphone ..............................................................................................................................................................174
n 5 N
Mouse ......................................................................................................................................................................175
Speakers ..................................................................................................................................................................176
Touch Pad................................................................................................................................................................177
Keyboard..................................................................................................................................................................178
Floppy Disks ............................................................................................................................................................179
PC Cards .................................................................................................................................................................180
Audio/Video..............................................................................................................................................................181
Memory Stick Media ................................................................................................................................................182
Peripherals ...............................................................................................................................................................183
Multi Function Bay Docking Station .........................................................................................................................184
Support Options .............................................................................................................................................................185
Sony Support Information ........................................................................................................................................185
e-Support .................................................................................................................................................................186
Trademarks ..............................................................................................................................................................188
n 6 N
Before Use
Before Use
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal
computing.
Notice
© 2006 Sony Corporation. All rights reserved.
This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any
machine-readable form without prior written approval.
Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and
hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this
manual, the software or such other information. In no event shall Sony Corporation be liable for any incidental, consequential,
or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the
software, or other information contained herein or the use thereof.
Macrovision: This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and
other limited viewing uses only, unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
In the manual, the ™ or ® marks are not specified.
Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time
without notice. The software described herein is governed by the terms of a separate user license agreement.
n 7 N
Before Use
ENERGY STAR
As an ENERGY STAR Partner, Sony has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through
the use of computers and their office equipment. The program backs the development and dissemination of products with
functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate
voluntarily. The targeted products are office equipment such as computers, displays, printers, facsimiles and copiers. Their
standards and logos are uniform among participating nations.
ENERGY STAR is a U.S. registered mark.
n 8 N
Before Use
Documentation
Your documentation includes printed information and user guides to read on your VAIO computer.
Guides are provided in PDF format, which you can easily browse through and print out.
The My Club VAIO portal is a perfect starting point to use your computer — a comprehensive collection of everything you
need to get the most from your computer.
The user guides are collected under Documentation, which can be shown as follows:
1
Click Start, point to All Programs, and click My Club VAIO.
2
Click Documentation.
3
Select the guide you want to read.
✍
You can manually browse to the user guides by going to My Computer > VAIO (C:) (your C drive) > Documentation > Documentation and opening the
folder for your language.
You may have a separate disc for the documentation of bundled accessories.
Printed Documentation
❑ A Setting Up Poster — Describes the process from unpacking to starting up your VAIO.
❑ Troubleshooting Guide — Contains solutions to common problems.
❑ Recovery Guide — Contains an explanation of how to recover your computer's system if you need to.
❑ Booklets containing the following information: Sony GUARANTEE conditions, Safety / Regulations, Modem
Regulations, Wireless LAN Regulations, Bluetooth Regulations, End User Software License Agreement, and
Sony Support services.
n 9 N
Before Use
Non-printed Documentation
❑ User Guide (this manual) — Contains features of your computer. It also includes information about the software programs
included with your computer, as well as information on solving common problems.
❑ Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer.
To view the online Specifications:
1
Connect to the Internet.
2
Go to the Sony online support Web site at http://www.vaio-link.com/.
n 10 N
Before Use
My Club VAIO
In My Club VAIO you can find:
Documentation, which gives you:
❑ Access to the User Guide. This manual explains the features of your computer in detail, how to use these features
confidently and safely, connect peripheral devices and more.
❑ Access to Help & Training. This is the portal of VAIO Help and Support Center.
❑ Important information about your computer, in the form of notices and announcements.
In My Club VAIO you can also find:
❑ Accessories
Want to expand the capabilities of your computer? Click on this icon and have a look at your compatible accessories.
❑ Software
Feeling creative? Click this icon for an overview of your software and check out our upgrade options.
❑ Wallpapers
Click this icon and check out our most popular Sony and Club VAIO wallpapers.
❑ Links
Click this icon and check out our most popular Sony and Club VAIO web sites.
n 11 N
Before Use
Help and Support Center
Help and Support Center is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn
to use Microsoft Windows XP and your computer.
Use the Search feature, Index, or table of contents to view all Windows Help resources, including those that are on the
Internet.
To access Help and Support Center, click Start and then Help and Support. Or go to the Help and Support Center by
pressing the Microsoft Windows key
and the F1 key.
Further Sources
❑ Consult the help files on the software you are using for detailed information on features and troubleshooting.
❑ Go to www.club-vaio.com to find online tutorials about your favorite VAIO software.
n 12 N
Before Use
Ergonomic Considerations
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt
to take account of the following ergonomic considerations to both stationary and portable environments:
❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your
wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse. Let your upper arms
hang naturally at your sides. Have breaks during sessions with your computer. Excessive use of the computer may strain
muscles or tendons.
❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning
far backwards.
n 13 N
Before Use
❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the
display as well.
❑ Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect
lighting to avoid bright spots on the display. You can also purchase accessories for your display that help reduce glare.
Proper lighting adds to your comfort and work effectiveness.
❑ Positioning an external display – When using an external display, set the display at a comfortable viewing distance.
Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.
n 14 N
Getting Started
Getting Started
This section describes how to get started with using your VAIO computer.
❑ Locating Controls and Ports (page 15)
❑ About the Indicator Lights (page 22)
❑ Connecting a Power Source (page 24)
❑ Using the Battery Pack (page 26)
❑ Shutting Down Your Computer Safely (page 31)
n 15 N
Getting Started
Locating Controls and Ports
Take a moment to identify the controls and ports shown on the following pages.
n 16 N
Getting Started
Front
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Built-in MOTION EYE camera*1 (page 37)
Built-in MOTION EYE camera indicator (page 22)
LCD screen (page 128)
Built-in speakers
Keyboard (page 33)
Touch pad (page 35)
Power indicator (page 22)
Battery indicator (page 22)
Hard disk drive indicator (page 22)
Memory Stick Duo/PRO Duo media indicator (page 22)
LCD screen lid LOCK/RELEASE switch
Make sure to slide this switch to the LOCK position before
moving your computer.
Headphones jack (page 86)
Microphone jack (page 98)
Built-in microphone (monaural)
WIRELESS switch (page 62)
WLAN (Wireless LAN) indicator (page 22)
Q Bluetooth indicator*1 (page 22)
R Memory Stick Duo/PRO Duo media slot*2 (page 55)
*1
On selected models only.
*2
Your computer supports Memory Stick Duo media and Memory Stick PRO
Duo media with high speed and high capacity capabilities.
n 17 N
Getting Started
A
B
C
D
E
F
G
H
I
Muting button (page 36)
Muting indicator (page 22)
VOL buttons (page 36)
S1/S2 buttons (page 36)
Num lock indicator (page 22)
Caps lock indicator (page 22)
Scroll lock indicator (page 22)
Power button
Power indicator (page 22)
n 18 N
Getting Started
Back
A Air vent
B Battery connector (page 26)
n 19 N
Getting Started
Right
A PC Card release button (page 49)
B PC Card slot (page 47)
C ExpressCard™/34 slot*1 (page 50)
D i.LINK® (IEEE 1394) S400 port (page 103)
E Hi-Speed USB (USB 2.0) ports*2 (page 99)
F S VIDEO OUTPUT port*3 *4 (page 92)
G Monitor (VGA) port*4(page 88)
H DC IN port (page 24)
*1
Referred to as the ExpressCard/34 slot hereinafter.
*2
Supports high-/full-/low- speeds.
*3
Referred to as the S VIDEO OUT port hereinafter.
*4
Disabled when your computer is attached to the optional multi function bay
docking station.
n 20 N
Getting Started
Left
A
B
C
D
Modem port (page 61)
Network (Ethernet) port (page 105)
Optical disc drive (page 38)
Drive eject button (page 38)/
Optical disc drive indicator (page 22)
E Manual eject hole (page 164)
F Security slot
n 21 N
Getting Started
Bottom
A Multi function bay docking station connector (page 80)
B Air vents
n 22 N
Getting Started
About the Indicator Lights
Your computer is equipped with the following indicator lights.
Indicator
Functions
Power 1
Illuminates when the power of the computer is on, blinks in Standby mode, and turns off when the computer is
in Hibernate mode or off.
Battery e
Illuminates when the computer is using battery power, blinks when the battery is running out of power, and
double-blinks when the battery is charging.
Memory Stick Duo/PRO Duo
Illuminates when data is read from or written to the Memory Stick media in the Memory Stick Duo/PRO Duo
slot. (Do not enter Standby mode or turn off the computer when this indicator is on.) When the indicator is off,
the Memory Stick media is not being used.
Muting %
Illuminates when the volume is turned off.
Built-in MOTION EYE camera*
Illuminates while the built-in MOTION EYE camera is in use.
Optical disc drive
Illuminates when data is read from or written to the optical disc. When the indicator is off, the optical disc is not
being used.
Hard disk
Illuminates when data is read from or written to the hard disk. Do not enter Standby mode or turn off the
computer when this indicator is on.
Num lock
Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.
The numeric keypad is not active when the indicator is off.
Caps lock
Scroll lock
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key
while the indicator is on. Press the key a second time to turn off the indicator. Normal typing resumes when the
Caps lock indicator is off.
Press the Scr Lk key to change how you scroll the display. Normal scrolling resumes when the Scroll lock
indicator is off. The Scr Lk key functions differently depending on the program you are using and does not work
with all programs.
n 23 N
Getting Started
Indicator
Bluetooth
Functions
*
WIRELESS LAN
*
On selected models only.
Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled.
Illuminates when the wireless LAN function is running.
n 24 N
Getting Started
Connecting a Power Source
You can use either an AC adapter or a rechargeable battery pack as a power source for your computer.
Using the AC Adapter
✍
Use the computer only with the supplied AC adapter.
To use the AC adapter
1
Plug one end of the power cord (1) into the AC adapter (3).
2
Plug the other end of the power cord into an AC outlet (2).
3
Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the optional multi function bay
docking station.
!
The shape of the DC In plug varies depending on the AC adapter.
n 25 N
Getting Started
✍
To disconnect the computer completely from AC power, unplug the AC adapter.
Make sure that the AC outlet is easily accessible.
If you do not use the computer for a long period of time, put the computer into Hibernate mode. See Using Hibernate Mode (page 114). This power
saving mode saves the time of shutting down or resuming.
n 26 N
Getting Started
Using the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of purchase.
Installing the Battery Pack
To install the battery pack
1
Turn off the computer and close the LCD screen lid.
2
Slide the battery lock switch (1) to the UNLOCK position.
3
Slide the battery into the battery compartment until it clicks into place.
n 27 N
Getting Started
4
Slide the battery lock switch (1) to the LOCK position to secure the battery on the computer.
✍
When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
!
Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this notebook only functions with genuine Sony
batteries designed for this model. When inserting another kind of battery, the battery will not be charged and the notebook will not function.
n 28 N
Getting Started
Charging the Battery Pack
The battery pack supplied with your computer is not fully charged at the time of purchase.
To charge the battery pack
1
Install the battery pack.
2
Connect the AC adapter to the computer.
The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery
charges). When the battery is about 85% charged, the battery indicator turns off.
Battery indicator light status
Meaning
On
The computer is using battery power.
Blinks
The battery is running out of power.
Double blinks
The battery is charging.
Off
The computer is using AC power.
n 29 N
Getting Started
✍
When the battery is running out of power, both the battery and power indicator lights blink.
Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer.
If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully charged
battery.
The battery pack supplied with the computer is a lithium ion battery and can be recharged any time. Charging a partially discharged battery does not
affect battery life.
The battery indicator light is on while you use the battery pack as a power source. When the battery life is nearly depleted, both the battery and power
indicator lights start flashing.
For some software applications and some peripheral devices, the computer may not enter Hibernate mode even when battery life is low. To avoid loss
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Standby or
Hibernate. If the battery wears out when the computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is
impossible. To avoid loss of data, you should save your data frequently.
When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.
n 30 N
Getting Started
Removing the Battery Pack
!
You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the
computer is in Standby mode.
To remove the battery pack
1
Turn off the computer and close the LCD screen lid.
2
Slide the battery lock switch (1) to the UNLOCK position.
3
Slide and hold the battery release latch (2) and slide the battery away from the computer.
n 31 N
Getting Started
Shutting Down Your Computer Safely
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.
To shut down your computer
1
Turn off any peripherals connected to the computer.
2
Click Start and then Turn Off Computer.
The Turn off computer window appears.
3
Click Turn Off.
4
Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off
automatically.
The power indicator light turns off.
n 32 N
Using Your VAIO Computer
Using Your VAIO Computer
This section describes how to get the most out of using your computer.
❑ Using the Keyboard (page 33)
❑ Using the Touch Pad (page 35)
❑ Using Special-function Buttons (page 36)
❑ Using the Built-in MOTION EYE Camera (page 37)
❑ Using the Optical Disc Drive (page 38)
❑ Using PC Cards (page 47)
❑ Using the ExpressCard Media (page 50)
❑ Using the Memory Stick Media (page 53)
❑ Using Other Memory Cards (page 58)
❑ Using the Internet (page 61)
❑ Using Wireless LAN (WLAN) (page 62)
❑ Using the Bluetooth Functionality (page 70)
n 33 N
Using Your VAIO Computer
Using the Keyboard
Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks.
The VAIO-Link web site (www.vaio-link.com) also contains glossary information to help you use the keyboard.
Combinations and Functions with the Fn Key
✍
Some functions are not available until Windows is launched.
Combinations/Feature
Functions
Fn + 8 (F5/F6): brightness control
Adjusts the LCD brightness of your computer screen.
To increase lightness intensity, press Fn+F6 and then M or ,, or keep pressing Fn+F6.
To decrease lightness intensity, press Fn+F5 and then m or <, or keep pressing Fn+F5.
Fn +
Toggles among your computer screen, an external display, and simultaneous output to both.
/T (F7): display output
!
When the computer is attached to the optional multi function bay docking station, this shortcut key toggles
between the LCD and the external display(s) connected to the docking station.
n 34 N
Using Your VAIO Computer
Combinations/Feature
Fn +
(F10): zoom
Functions
Changes the screen resolution to magnify/restore your computer's screen view.
✍
The default resolutions of the standard view and the magnified view are as follows:
Standard view: 1280 x 800 pixels
Magnified view: 1024 x 600 pixels
The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution
to the computer screen with a higher resolution.
This key combination is disabled during video playback. Make sure to quit such software before pressing
the key combination.
This key combination may not work with graphic images as it magnifies the screen view by changing the
resolution.
The location and size of software windows may change when the screen view is magnified or the standard
view is restored because pressing this key combination changes the resolution.
When your computer's screen view is magnified, switching the view to the external display disables the
function and restores the standard view.
Fn +
(F12): Hibernate
Provides for the lowest level of power consumption. When you execute this command, the
states of the system and the peripheral devices are written to the hard disk and the system
power is turned off. To return the system to its original state, use the power button to turn on the
power.
For details on power management, see Using the Power Saving Modes (page 111).
n 35 N
Using Your VAIO Computer
Using the Touch Pad
The keyboard contains a cursor-pointing device, the touch pad (1). You can point to, select, drag, and scroll objects on the
screen using the touch pad.
Action
Description
Point
Slide one finger on the touch pad to place the pointer (2) on an item or object.
Click
Press the left button (3) once.
Double-click
Press the left button twice.
Right-click
Press the right button (4) once. In many applications, this action displays a shortcut menu.
Drag
Slide one finger on the touch pad while pressing the left button.
Scroll
Move your finger along the right edge of the touch pad to scroll vertically. Move your finger along the bottom to scroll
horizontally (the scroll function is available only with applications that support a touch pad scroll feature).
✍
You can disable/enable the touch pad to suit your preference for using the mouse. See Setting Up Your Computer with VAIO Control Center (page 110)
to launch VAIO Control Center. Once launched, select the topic on the pointing device and click Help to see the detailed instructions.
n 36 N
Using Your VAIO Computer
Using Special-function Buttons
Your computer is equipped with special buttons to help you use specific functions of the computer.
Special-function button
S1/S2 buttons
Functions
By default, the S1 button launches VAIO Help and Support Center and the S2 button toggles among your
computer screen, an external display, and simultaneous output to both. You can change these button
assignments on the window for changing the S button assignments. To display this window, press and hold
either button or launch and navigate through VAIO Control Center.
See the help file on VAIO Control Center for the S button assignments.
Turns the volume on and off.
Muting button
Decrease (-) and increase (+) the volume.
VOL buttons
(Volume down and Volume up)
n 37 N
Using Your VAIO Computer
Using the Built-in MOTION EYE Camera
Your computer may be equipped with a built-in MOTION EYE camera. See the online Specifications to find whether your
model is equipped with the built-in MOTION EYE camera.
The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software, for
example Windows Messenger and Windows MovieMaker.
Turning on the computer activates the built-in MOTION EYE camera, so the computer is ready for a video conference using
such software.
Note that launching or exiting your instant messaging or video editing software does not activate or deactivate the MOTION
EYE camera, respectively. Make sure that the camera is activated before using the software.
✍
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the
application before using the built-in MOTION EYE camera.
!
The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a
malfunction.
n 38 N
Using Your VAIO Computer
Using the Optical Disc Drive
Your computer is equipped with an optical disc drive.
To insert a disc
1
Turn on the computer.
2
Press the drive eject button (1) to open the drive.
The tray slides out.
3
Place a disc in the middle of the tray with the label side facing up and gently push it until the disc clicks into place.
n 39 N
Using Your VAIO Computer
4
Close the tray by pushing it in gently.
!
Do not remove the optical disc when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction.
✍
If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.
n 40 N
Using Your VAIO Computer
Reading and Writing CDs and DVDs
Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the
type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive
supports.
Optical disc drive
Plays
Records to
DVD-ROM
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD+R DL (Double Layer), and
DVD-R DL (Dual Layer)
—
CD-RW/DVD-ROM
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,
DVD+R, DVD+R DL (Double Layer),
DVD-R DL (Dual Layer), and DVD+RW
CD-R and CD-RW
DVD±RW (Supporting DVD+R DL)
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,
DVD+R, DVD+R DL (Double Layer),
DVD-R DL (Dual Layer), and DVD+RW
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,
DVD+R DL (Double Layer), and DVD+RW
DVD±RW/+R DL/RAM
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,
DVD+R, DVD+R DL (Double Layer),
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,
DVD+R DL (Double Layer), DVD+RW,
DVD-R DL (Dual Layer), DVD+RW, and DVD-RAM*
and DVD-RAM*
DVD±RW (Supporting DVD±R DL)
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,
DVD+R, DVD+R DL (Double Layer),
DVD-R DL (Dual Layer), and DVD+RW
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,
DVD+R DL (Double Layer), DVD-R DL (Dual Layer),
and DVD+RW
DVD±RW/±R DL/RAM
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,
DVD+R, DVD+R DL (Double Layer),
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,
DVD+R DL (Double Layer), DVD-R DL (Dual Layer),
DVD-R DL (Dual Layer), DVD+RW, and DVD-RAM*
DVD+RW, and DVD-RAM*
*
On selected models only.
n 41 N
Using Your VAIO Computer
!
This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two
sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Please be aware that the audio side
(non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.
!
Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices
on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee
the compatibility of VAIO CD drives with discs that are not compliant with the official "CD" format standard (or "DVD" standard in relation to DVD drives).
USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE TO YOUR VAIO PC OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.
✍
Supports writing data to DVD-RW discs compliant with DVD-RW version 1.1/1.2.
Supports writing data to DVD-R discs compliant with DVD-R for General version 2.0/2.1.
Supports 8cm disc reading, but does not support 8cm disc writing.
Writing data to DVD+R DL (Double Layer) discs is available only on discs supporting DVD+R DL (Double Layer) recording.
Writing data to DVD-R DL (Dual Layer) discs is available only on discs supporting DVD-R DL (Dual Layer) recording.
The DVD±RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with removable cartridge.
Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM version 1.0 is not supported.
n 42 N
Using Your VAIO Computer
Notes on writing data to a disc
❑ To make the data on a disc readable on an optical disc drive, you need to close the session before you eject it. To complete
this process, follow the instructions included with your software.
❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc
drive.
❑ Do not strike or shake the computer while writing data to a disc.
❑ Deactivate the screen saver and exit anti-virus software before writing data to a disc.
❑ Do not use memory-resident utility software while writing data to a disc. This may cause the computer to malfunction.
❑ When using your software application to burn discs, make sure you exit and close all other applications.
❑ Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing errors.
❑ Do not switch power modes while using the pre-installed software and while using the CD burning software.
❑ Never affix an adhesive label to discs. This will affect the use of the disc irreparably.
❑ Connect and use the AC adapter to power the computer or make sure your battery is at least 50 percent charged.
❑ Some DVD players and computer's DVD drives may not be able to play DVDs created on applicable models using the
VAIO Zone software.
n 43 N
Using Your VAIO Computer
Notes on playing DVDs
To achieve optimum performance when playing DVDs, you should follow these recommendations.
❑ You can play DVDs using the optical disc drive and the DVD playback software, such as VAIO Zone or WinDVD. See the
help file on such software for details.
❑ Close all open applications before playing a DVD movie.
❑ Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause the computer
to malfunction.
❑ Deactivate the screen saver and exit anti-virus software before playing a disc.
❑ Some discs recorded at 20 or 24 bits may produce noise while playing. If you have audio devices connected, this may
damage your hearing and the speakers. Reduce the volume before playing a DVD.
❑ Do not switch to power saving modes while the computer is playing a DVD.
❑ Region codes indicators are labeled on the DVDs to indicate in which region and on what type of player you can play the
disc. Unless a "2" (Europe belongs to region "2") or "all" (this means that you can play this DVD in most regions of the
world) is labeled on your DVD disc or on the packaging, you cannot play the disc on your computer.
!
If you change the DVD region code while the WinDVD software is running, restart the software or eject the disc and re-insert it to make the new setting
effective.
❑ Do not try to change the region code settings of the DVD drive. Any difficulties caused by changing the region code
settings of the DVD drive are out of warranty.
❑ If your computer has the Wireless LAN functionality and Wireless LAN is activated, playing DVDs may cause some
interruptions in audio and video.
❑ When you are playing a DVD (video or audio) and you want to remove a USB device, such as USB-compatible speakers,
make sure you stop the DVD first. Removing a USB-compatible device during DVD (video or audio) playback may cause
a malfunction.
n 44 N
Using Your VAIO Computer
Playing CDs
To play an audio CD
1
Insert a disc into the optical disc drive.
2
If nothing appears on the desktop, then click Start, point to All Programs, and click to open a CD program, such as the
SonicStage software.
If the Audio CD window appears, click to select an option.
n 45 N
Using Your VAIO Computer
Copying Files to CDs
See the online Specifications to find the type of your optical disc drive, and then Reading and Writing CDs and DVDs
(page 40) to find about the supported disc media.
To copy files to a disc
!
Do not strike or shake the computer while writing data to a disc.
1
Insert a blank disc into the optical disc drive.
If the CD Drive window appears, click Take no action and then click OK.
2
Right-click Start and then click Explore.
3
In the Folders panel on the left, locate the file(s) or folder(s) you want to copy, right-click the file(s) or folder(s), point to
Send To, and then click the optical disc drive* name.
4
Close the window.
5
Click Start and then My Computer.
6
Click the optical disc drive icon under Devices with Removable Storage. A new window appears with the file(s) or
folder(s) you want to copy listed under Files Ready to Be Written to the CD.
7
In the CD Writing Tasks box, click Write these files to CD.
8
Follow the instructions in the CD Writing Wizard.
*
The read/write drive letter designation may vary, depending on your system's hardware configuration.
n 46 N
Using Your VAIO Computer
Playing DVDs
To play a DVD
1
Close all open programs.
2
Insert a DVD into the optical disc drive.
3
If nothing appears on the desktop, then click Start, point to All Programs, and click to open a DVD program to play the
DVD.
For instructions on how to use a program, see the help file included with the DVD program.
Copying Files to DVDs
The DVD writing function is available on selected models only. See the online Specifications to find the type of your optical
disc drive, and then Reading and Writing CDs and DVDs (page 40) to find about the supported disc media.
To copy files to a disc
1
Connect the AC adapter to the computer.
2
Insert a disc into the optical disc drive.
3
If nothing appears on the desktop, then click Start, point to All Programs, and click to open a DVD program you want to
use.
For instructions on how to use a program, see the help file included with the DVD program.
n 47 N
Using Your VAIO Computer
Using PC Cards
PC Cards allow you to connect portable external devices to your computer.
Inserting a PC Card
!
Some PC Cards or their functions may not be compatible with the computer.
You do not need to shut down the computer before inserting or removing a PC Card.
To insert a PC Card
1
Push the PC Card release button so that the release button pops out.
2
Push the PC Card release button a second time so that the PC Card slot protector pops out.
3
Gently take hold of the protector and pull it out of the slot.
4
Insert the PC Card into the PC Card slot with the front label facing up.
5
Gently push the PC Card into the slot.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears on the taskbar.
n 48 N
Using Your VAIO Computer
!
Insert the PC Card slot protector to protect against debris entering the slot when not using a PC Card. Before moving the computer, make sure to insert
the PC Card slot protector into the slot.
✍
Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you
alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not
recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer.
While the card is inserted, the computer may not enter Hibernate power management mode. It may enter Standby mode. We recommend that you
remove the card before the computer enters Hibernate mode.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
If an "!" mark appears on the Device Manager tab in the System Properties window, remove the software driver and then reinstall it.
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC
Card in the correct direction. See the manual that came with your PC Card for more information.
n 49 N
Using Your VAIO Computer
Removing a PC Card
Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not
work properly.
To remove a PC Card
✍
To remove a PC Card when the computer is off, skip steps 1 to 6.
1
Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
2
Select the hardware you want to unplug.
3
Click Stop.
The Stop a Hardware Device window appears.
4
Confirm that the device can be safely removed from the system.
5
Click OK.
A window appears, explaining that it is safe to remove the device.
6
Click Close.
7
Push the PC Card release button so that the release button pops out.
8
Push the PC Card release button a second time so that the PC Card pops out.
9
Gently take hold of the Card and pull it out of the slot.
10 If the PC Card release button is still out, push it back in.
n 50 N
Using Your VAIO Computer
Using the ExpressCard Media
Your computer is equipped with an ExpressCard™/34* slot to accommodate ExpressCard™/34* (34 mm wide) media. You
can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.
*
Hereinafter, referred to as the ExpressCard/34 slot and the ExpressCard/34 media.
The ExpressCard/34 slot can also accommodate other memory cards, including standard-size Memory Stick media, via the
memory card adapter. See Using Other Memory Cards (page 58) for the instructions to use the memory card adapter and
other memory cards.
Inserting an ExpressCard Media
!
Your computer is delivered with a slot protector in the ExpressCard/34 slot. Remove the slot protector before you use the ExpressCard/34 slot for the
first time.
Use care when inserting or removing the ExpressCard/34 media from the slot. Do not force it in or out of the slot.
✍
You do not need to shut down the computer before inserting or removing an ExpressCard/34 media.
To insert an ExpressCard media
1
Push the ExpressCard/34 slot protector to pop it out.
2
Gently take hold of the protector and pull it out of the slot.
3
Hold the ExpressCard/34 media with the arrow facing up and toward the ExpressCard/34 slot.
n 51 N
Using Your VAIO Computer
4
Carefully slide the ExpressCard/34 media (1) into the slot until it clicks into place.
Do not force it into the slot.
!
Insert the ExpressCard/34 slot protector to protect against debris entering the slot when not using an ExpressCard/34 media. Before moving the
computer, make sure to insert the ExpressCard/34 slot protector into the slot.
✍
If the media or adapter does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
Make sure you use the most recent software driver provided by the ExpressCard/34 media manufacturer.
n 52 N
Using Your VAIO Computer
Removing an ExpressCard Media
Follow the steps below to remove the ExpressCard/34 media while your computer is on. If it is not removed properly, your
system may not work properly.
To remove an ExpressCard media
✍
To remove an ExpressCard/34 media when the computer is off, skip steps 1 to 6.
1
Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
2
Select the hardware you want to unplug.
3
Click Stop.
The Stop a Hardware Device window appears.
4
Confirm that the device can be safely removed from the system.
5
Click OK.
A window appears, explaining that it is safe to remove the device.
6
Click Close.
7
Push in the ExpressCard/34 media toward the computer to pop it out.
8
Gently take hold of the ExpressCard/34 media and pull it out of the slot.
n 53 N
Using Your VAIO Computer
Using the Memory Stick Media
Your computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile device especially
designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other
devices. Because it is removable, it can be used for external data storage.
See the online Specifications to see which Memory Stick media types are compatible with your model and if there are any
limitations.
❑ You can purchase Memory Stick media from the Sony Style website (www.sonystyle-europe.com), or from your local Sony
dealer.
❑ Detailed information about which VAIO computers are compatible with which Memory Stick media can be found at
www.vaio-link.com.
!
Your computer has been tested and found compatible with the Sony branded Memory Stick media with capacity of up to 4 GB that are available as of
January 2006. However, not all Memory Stick media that meet the same conditions as the compatible media are guaranteed of compatibility.
n 54 N
Using Your VAIO Computer
Write-protecting a Memory Stick Media
Some versions of Memory Stick media are designed with an erasure prevention switch to protect valuable data from
accidental erasure or overwriting.
Move the tab horizontally or vertically* to set or release write-protection. When the erasure prevention switch is off, data can
be saved on the Memory Stick media. When the erasure prevention switch is on, data can be read from but not saved on the
Memory Stick media.
*
Some versions of Memory Stick media do not have an erasure prevention switch.
n 55 N
Using Your VAIO Computer
Inserting a Memory Stick Media
There are two ways you can insert a Memory Stick media into your computer.
❑ Using the Memory Stick Duo/PRO Duo media slot
The Memory Stick media slot accommodates a small-size Memory Stick media: Memory Stick Duo or Memory Stick PRO
Duo media.
❑ Using the ExpressCard/34 slot
To insert a standard-size Memory Stick media, use the ExpressCard/34 slot. To do this, you need the supplied memory
card adapter. See Using the ExpressCard Media (page 50) and Using Other Memory Cards (page 58) for more
information.
n 56 N
Using Your VAIO Computer
To insert a Memory Stick media using the Memory Stick Duo/PRO Duo media slot
1
Hold the Memory Stick media with the arrow facing up and toward the Memory Stick Duo/PRO Duo media slot.
2
Carefully slide the Memory Stick media into the slot until it clicks into place.
The Memory Stick media is automatically detected by your system and appears in your My Computer window as a local
drive, under the appropriate letter (depending on the configuration of the computer).
!
Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging the computer
or the Memory Stick media, do not force the Memory Stick media into the slot if it does not insert smoothly.
Do not insert more than one Memory Stick media into the slot. Inserting the media improperly may damage the computer.
n 57 N
Using Your VAIO Computer
✍
The computer supports Memory Stick Duo media and is equipped with the Memory Stick Duo/PRO Duo slot that is only compatible with the duo-size
media. For more information on Memory Stick Duo media, visit the Memory Stick web site at http://www.memorystick.com/en/.
To view the contents of the Memory Stick media
1
Click Start and then My Computer to open the My Computer window.
2
Double-click the Memory Stick media icon
to view the list of data files saved in the Memory Stick media.
To format a Memory Stick media
Use the Memory Stick Formatter software. See the help file on the Memory Stick Formatter software for details.
Removing a Memory Stick Media
To remove a Memory Stick media from the Memory Stick Duo/PRO Duo media slot
1
Check that the Memory Stick Duo/PRO Duo media indicator is off.
2
Push the Memory Stick media in toward the computer.
The Memory Stick media ejects.
3
Pull the Memory Stick media out of the slot.
!
Always remove the Memory Stick media gently, or it may pop out unexpectedly.
Do not remove the Memory Stick media while the Memory Stick Duo/PRO Duo media indicator is turned on. If you do, you may lose data. Large volumes
of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.
n 58 N
Using Your VAIO Computer
Using Other Memory Cards
Your computer is delivered with the memory card adapter for the ExpressCard/34 slot to support the following memory cards
besides the ExpressCard/34 media:
❑ Standard-size Memory Stick and Memory Stick PRO
❑ Secure Digital (SD)
❑ MultiMediaCard (MMC)
❑ xD-Picture Card
!
The MagicGate feature of the Memory Stick media and the Memory Stick PRO media is not supported.
The copyright protection and high-speed data transfer features of the SD memory card are not supported.
As for the Memory Stick PRO media, only Sony branded media is recommended to use with the adapter.
Your computer has been tested and found compatible only with major memory card media available as of January 2006. However, not all memory card
media that meet the same conditions as the compatible media are guaranteed of compatibility.
n 59 N
Using Your VAIO Computer
Inserting a Memory Card
To insert a memory card to the memory card adapter
1
Insert any one of the memory cards (2) to the memory card adapter (1).
!
Make sure to insert a memory card into the memory card adapter in the correct direction to avoid possible damage to the memory card adapter.
2
See Inserting an ExpressCard Media (page 50) to insert the memory card adapter into the ExpressCard/34 slot.
n 60 N
Using Your VAIO Computer
Removing a Memory Card
To remove a memory card from the memory card adapter
See Removing an ExpressCard Media (page 52) to remove the memory card adapter from the ExpressCard/34 slot. Then,
firmly grasp the extended part of the memory card and carefully pull it out of the memory card adapter.
n 61 N
Using Your VAIO Computer
Using the Internet
Setting Up a Dial-up Internet Connection
Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (may
not supplied). Once you have set up your telephone cable connection, you're ready to connect to the Internet.
To connect a telephone cable
1
Plug one end of the phone cable (1) into the modem port
2
Plug the other end into the wall jack (2).
on the computer.
✍
The computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a
private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.
If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.
To set up a dial-up connection to the Internet
1
Click Start, point to All Programs, Accessories, Communications, and click New Connection Wizard.
The New Connection Wizard appears.
2
Click Next. If the Location Information window appears, follow the on-screen instructions.
3
If it is not already selected, click to select Connect to the Internet, and click Next.
4
Follow the on-screen instructions.
n 62 N
Using Your VAIO Computer
Using Wireless LAN (WLAN)
Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each
other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through
a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still
access information, internet/intranet and network resources, even in the middle of a meeting, or as you move from one place
to another.
You can communicate without an access point, which means that you can communicate between a limited number of
computers (ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure
network (infrastructure).
✍
In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the
WLAN functionality, read the Regulations Guide carefully.
WLAN uses the IEEE 802.11a*/b/g standard, which specifies the used technology. The standard includes the encryption method: Wired Equivalent
Privacy (WEP), which is a security protocol and WiFi Protected Access (WPA - Proposed jointly by the IEEE and Wi-Fi Alliance, WiFi Protected Access
is a specification of standards based, interoperable security enhancements that increase the level of data protection and access control for existing WiFi
networks. WPA has been designed to be forward compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption TKIP (Temporal
Key Integrity Protocol) in addition to user authentication using 802.1X and EAP (Extensible Authentication Protocol)). Data encryption protects the
vulnerable wireless link between clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as:
password protection, end-to-end encryption, virtual private networks, and authentication.
* See the online Specifications to see whether your model supports the IEEE 802.11a standard.
n 63 N
Using Your VAIO Computer
Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b or g standard cannot communicate because the frequencies
are different.
IEEE 802.11b: The standard speed is 11 Mbps, or about 30 to 100 times faster than a standard dial up.
IEEE 802.11a/g: The standard speed is 54 Mbps, or about 5 times faster than a Wireless LAN device using the IEEE 802.11b standard.
The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference
from other devices that use the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication
speed, narrower communication range, or broken wireless connections.
The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.
The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.
Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with
IEEE 802.11b products.
When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase the communication speed.
n 64 N
Using Your VAIO Computer
Communicating without an Access Point (Ad-hoc)
An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other
central controller or access point. Each device communicates directly with other devices in the network. You can set up an
ad-hoc network easily at home.
❑ If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.
❑ If the Wireless connection is initiated by peer Wireless LAN equipment, the Wireless LAN communication will make use
of the channel selected by the peer Wireless LAN equipment.
n 65 N
Using Your VAIO Computer
To communicate without an access point (ad-hoc)
1
Turn on the WIRELESS or WIRELESS LAN switch.
The WIRELESS LAN indicator lights up.
On models that support the Bluetooth functionality*1 and/or the IEEE 802.11a/b/g standard*1, double-click
(
/
on the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.
2
Click Start and then Control Panel.
3
Click Network and Internet Connections.
4
Click Network Connections.
The Network Connections window appears.
5
Right-click Wireless Network Connection, then click Properties.
The Wireless Network Connection Properties window appears.
6
Select the Wireless Networks tab.
7
Click the Add… button.
The Wireless network properties window appears.
8
Enter a network name (SSID)*2.
You can choose a 32-digit alphanumeric name.
9
Select Open from the Network Authentication drop-down box.
10 Select WEP from the Data Encryption drop-down box.
11 Deselect the The key is provided for me automatically option button.
Some information becomes visible.
)
n 66 N
Using Your VAIO Computer
12 Enter the network key*2.
The network key should be 5 or 13 alphanumeric characters or 10 or 26 hexadecimal*3 characters long. You can choose
whichever you want.
13 Enter exactly the same network key again, for confirmation.
14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the
bottom of the window.
15 Click OK.
Your network name appears in the Preferred networks.
16 Click Advanced.
The Advanced window appears.
17 Select the Computer-to-computer (ad hoc) networks only option button.
18 Click Close.
19 Click OK.
The computer is ready to communicate with another computer.
*1
See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.
*2
If you want to communicate between two or more computers, you need to configure all these computers in the exact same way. This means that you need to enter the
same network name and the same network key on all computers as on the first computer you configure.
*3
Hexadecimal: A number representation using the digits 0-9, with their usual meaning, plus the letters A-F (or a-f) to represent hexadecimal digits with values of (decimal)
10 to 15.
✍
An ad-hoc network does not support WPA.
n 67 N
Using Your VAIO Computer
To disconnect from a computer-to-computer (ad-hoc) network
1
Click Start and then Control Panel.
2
Click Network and Internet Connections.
3
Click Network Connections.
The Network Connections window appears.
4
In the right panel under LAN or High-Speed Internet, right-click Wireless Network Connection.
5
Click Properties.
The Wireless Network Connection Properties window appears.
6
On the Wireless Networks tab, click Advanced.
The Advanced window appears.
7
Click to select Any available network (access point preferred), and click Close.
8
Click OK.
9
Close the Network Connections window.
10 Turn off the WIRELESS or WIRELESS LAN switch.
n 68 N
Using Your VAIO Computer
Communicating with an Access Point (Infrastructure)
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access
point, for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a central
controller for the Wireless LAN. The access point coordinates transmission and reception from multiple wireless devices
within a specific range.
The access point will select which channel to use on an infrastructure network.
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.
n 69 N
Using Your VAIO Computer
To connect to a wireless network
1
Make sure an access point is set up.
See the manual that came with your access point for more information.
2
Turn on the WIRELESS or WIRELESS LAN switch.
The WIRELESS LAN indicator lights up.
(
/
On models that support the Bluetooth functionality* and/or the IEEE 802.11a/b/g standard*, double-click
the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.
3
Click Start and then Control Panel.
4
Click Network and Internet Connections.
5
Click Network Connections.
The Network Connections window appears.
6
In the right panel under LAN or High-Speed Internet, double-click Wireless Network Connection.
The Wireless Network Connection window appears.
7
Select the network you want to use.
8
Enter the network key.
9
Click Connect.
After 30 seconds, the connection is established.
*
See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.
For more information about setting up an access point, see the manual that came with your access point.
✍
For WPA-PSK or WPA2-PSK authentication, you must enter a network key of 8 to 64 alphanumeric characters long.
) on
n 70 N
Using Your VAIO Computer
Using the Bluetooth Functionality
The Bluetooth functionality is available on selected models only. See the online Specifications to see whether your model
supports the Bluetooth functionality.
You can establish wireless communication between your computer and other Bluetooth devices such as another computer
or a mobile phone. You can transfer data between these devices without cables and up to 10 meters range in open space.
To connect to a Bluetooth device
1
Turn on the WIRELESS switch.
2
Double-click
3
Select the Enable Bluetooth Device option.
4
Click OK.
(
/
) on the taskbar to display the Wireless Device Switch window.
n 71 N
Using Your VAIO Computer
Notes on using the Bluetooth functionality
❑ The data transfer rate varies, depending on the following conditions:
❑ Obstacles, such as walls, located between devices
❑ Distance between devices
❑ Material used in walls
❑ Proximity to microwaves and cordless telephones
❑ Radio frequency interference and other environmental conditions
❑ Device configuration
❑ Type of software application
❑ Type of operating system
❑ Use of both Wireless LAN and Bluetooth functionalities at the same time on the computer
❑ Size of file being exchanged
❑ Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer
due to electromagnetic interference from the environment.
❑ All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may
not be possible in all situations.
n 72 N
Using Your VAIO Computer
❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous
use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result
in poorer communication speeds and distances than the standard values.
✍
Read the Regulations Guide before using the Bluetooth functionality.
❑ The Bluetooth functionality may not work depending on the third party devices or the software version used by third party
companies.
❑ As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause
bandwidth congestion, resulting in poor performance of the devices.
Bluetooth Security
The Bluetooth wireless technology has an authentication function, which allows you to determine whom you choose to
communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer.
The first time two Bluetooth devices communicate, a common Passkey (a password required for authentication) should be
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the Passkey.
✍
The passkey can be different each time, but must be the same at both ends.
For certain devices, such as a mouse, no passkey can be entered.
n 73 N
Using Your VAIO Computer
Communicating with Another Bluetooth Device
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a
mouse, or a digital camera without the use of any cables.
n 74 N
Using Your VAIO Computer
To communicate with another Bluetooth device
To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using
the Bluetooth functionality, see the help file on the Bluetooth utility software.
To see the help file
1
Right-click the Bluetooth icon
on the taskbar, and select Help from the menu.
Stopping the Bluetooth Connection
To stop the Bluetooth connection, turn off the WIRELESS switch. The Bluetooth indicator turns off.
n 75 N
Using Your VAIO Computer
Using the Bluetooth Headset
The Bluetooth headset is available as an optional accessory. It will come in handy during a video conference over the Internet
using instant messaging software, for example Windows Messenger. For details on using the Bluetooth headset, see the
manual that came with your Bluetooth headset.
To connect the headset with your computer
1
Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.
2
Press and hold the volume buttons until the indicator light blinks in red.
3
Right-click the Bluetooth icon
on the taskbar and select Bluetooth Settings from the menu.
The Bluetooth Settings window appears and Add New Connection Wizard automatically starts.
4
If the Add New Connection Wizard window does not appear, click New Connection.
The Add New Connection Wizard window appears.
5
Select Express Mode [Recommended] and then click Next.
The wizard searches for Bluetooth devices in range and lists available devices, if any.
6
Select HBH-608 and then click Next.
The Bluetooth Manager-Bluetooth Security window appears when a connection is established.
7
Enter "0000" for Bluetooth Passkey (PIN) and then click OK.
8
Press the headset power button.
9
Click Finish.
The headset icon appears in the Bluetooth Settings window.
10 Click the headset icon and then press the headset power button.
The computer should now be ready to communicate with the Bluetooth headset.
n 76 N
Using Your VAIO Computer
To disconnect the headset from your computer
1
Right-click the Bluetooth icon
on the taskbar and select Bluetooth Settings from the menu.
The Bluetooth Settings window appears.
2
Select Disconnect from the Bluetooth menu.
3
Click Yes.
n 77 N
Using Peripheral Devices
Using Peripheral Devices
You can add functionality to your computer by using the various ports on the computer.
❑ Connecting a Multi Function Bay Docking Station (page 78)
❑ Connecting External Speakers (page 86)
❑ Connecting an External Display (page 87)
❑ Selecting Display Modes (page 95)
❑ Using the Multiple Monitors Function (page 96)
❑ Connecting an External Microphone (page 98)
❑ Connecting a Universal Serial Bus (USB) Device (page 99)
❑ Connecting a Printer (page 102)
❑ Connecting an i.LINK Device (page 103)
❑ Connecting to a Network (LAN) (page 105)
n 78 N
Using Peripheral Devices
Connecting a Multi Function Bay Docking Station
Attaching a multi function bay docking station enables you to connect additional peripherals to your computer, such as a
printer and an external display.
A multi function bay docking station is not supplied with your computer and is available as an optional accessory.
Locating Ports on the Multi Function Bay Docking Station
Back
A DC IN port (page 24)
B Hi-Speed USB (USB 2.0) ports*1 (page 99)
C DVI-D port*2 (page 88)
D MONITOR (VGA) port (page 88)
E OPTICAL OUT port (Output frequency 96 kHz/48 kHz/44 kHz/
Variable)
Connect digital equipment such as an AV amplifier.
F
G
H
I
PHONES OUT jack*3 (page 86)
VIDEO OUT port (page 92)
S VIDEO OUT port (page 92)
Network (Ethernet) port (1000BASE-T / 100BASE-TX /
10BASE-T) (page 105)
J Security slot
*1
Supports high-/full-/low- speeds.
*2
Enabled only when a model with the NVIDIA video controller is attached.
*3
Referred to as the headphones jack hereinafter.
n 79 N
Using Peripheral Devices
Front/Left
A
B
C
D
IN USE indicator (page 83)
UNDOCK button (page 83)
PUSH RELEASE button (page 83)
DC IN indicator
Illuminates when the multi function bay docking station is
powered.
E Multi function bay*
F Multi function bay unit eject button*
*
See the manual that came with the optional multi function bay docking
station.
!
The multi function bay docking station can be powered only through the AC adapter supplied with the multi function bay docking station. Do not unplug
the AC adapter from the multi function bay docking station and the AC outlet while using the multi function bay docking station; this may cause data
damage or hardware malfunctions.
n 80 N
Using Peripheral Devices
Attaching Your Computer to the Multi Function Bay Docking Station
!
When the computer has no battery inserted, do not attach the computer to the multi function bay docking station.
The multi function bay docking station is equipped with a size adjuster for use with other VAIO models, which is described in the manual that came
with the docking station. You do not need to use this size adjuster for your model.
To attach your computer to the multi function bay docking station
!
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the multi function bay docking station.
1
Disconnect all peripherals from the computer.
2
Plug the power cord (1) into the AC adapter (2) and an AC outlet.
3
Plug the cable attached to the AC adapter (2) into the DC IN port (3) on the multi function bay docking station (4).
n 81 N
Using Peripheral Devices
4
Slide open the multi function bay docking station connector cover on the bottom of the computer.
5
Place the computer on the multi function bay docking station. Bring the arrows on the back of the computer and on the
multi function bay docking station together so that the connector on the bottom of the computer comes in contact with that
on the docking station.
n 82 N
Using Peripheral Devices
6
Gently push down the computer until it clicks into place.
7
Turn on the computer.
!
Use the AC adapter supplied with the multi function bay docking station.
Do not move the computer while attached to the multi function bay docking station; this may detach the multi function bay docking station and cause
damage to the multi function bay docking station and the computer.
n 83 N
Using Peripheral Devices
Disconnecting Your Computer from the Multi Function Bay Docking Station
!
To prevent loss of unsaved data, be sure to turn off the computer before disconnecting it from the multi function bay docking station.
Be sure that no devices connected to the multi function bay docking station are in use before disconnecting the computer.
Do not disconnect the computer from the multi function bay docking station when the IN USE indicator is lit. Disconnecting the computer while the IN
USE indicator is lit may result in loss of unsaved data or a failure of the computer.
When the battery is running out of power, disconnecting the computer from the multi function bay docking station may result in loss of unsaved data.
Do not disconnect the computer from the multi function bay docking station during video playback. Be sure to close video playback software before
disconnection.
To disconnect your computer from the multi function bay docking station
1
Press the UNDOCK button (1).
✍
If the IN USE indicator is unlit, you do not have to press the UNDOCK button.
Pressing the UNDOCK button while the computer is in a power saving mode returns the computer to Normal mode first, and then initiates the
disconnection process.
n 84 N
Using Peripheral Devices
2
Wait until the IN USE indicator (2) turns off and then press the PUSH RELEASE button (3).
3
Lift the computer away from the multi function bay docking station.
4
Close the multi function bay docking station connector cover on the bottom of the computer.
n 85 N
Using Peripheral Devices
Alternatively, you can disconnect the computer from the multi function bay docking station as follows:
1
Click Start and then Undock Computer.
2
Make sure that a message balloon appears and the IN USE indicator turns off, and then press the PUSH RELEASE
button.
3
Lift the computer away from the multi function bay docking station.
4
Close the multi function bay docking station connector cover on the bottom of the computer.
✍
It is extremely important to close the multi function bay docking station connector cover after disconnecting the computer from the multi function bay
docking station. If the cover is left open, dust may get inside and damage the computer.
To disconnect the multi function bay docking station completely from AC power, unplug the AC adapter.
n 86 N
Using Peripheral Devices
Connecting External Speakers
You can enhance the sound quality of your computer by connecting external speakers.
To connect external speakers
1
Plug the speaker cable (1) into the headphones jack (2) on the computer or on the multi function bay docking station.
2
Plug the other end of the speaker cable to the external speaker (3).
3
Turn down the volume of the speakers before you turn them on.
✍
Make sure your speakers are designed for computer use.
!
Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks.
n 87 N
Using Peripheral Devices
Connecting an External Display
You can connect an external display to your computer. For example, you can use the computer with a computer display or a
projector.
❑ Connecting a Computer Display (page 88)
❑ Connecting a Multimedia Computer Display (page 90)
❑ Connecting a TV (page 92)
❑ Connecting a Projector (page 93)
✍
Connect the power cord after connecting all other cables.
Connected external displays are used as second screens.
On Windows systems only, you can also use an external display to set up multiple monitors.
n 88 N
Using Peripheral Devices
Connecting a Computer Display
You can connect a computer display (monitor) either directly to your computer or via the optional multi function bay docking
station.
To connect a computer display
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.
1
If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.
2
If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the
computer or on the multi function bay docking station.
3
If you want to connect a TFT/DVI monitor, plug the display cable (not supplied) into the DVI-D port on the multi function
bay docking station.
n 89 N
Using Peripheral Devices
✍
DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has
24 pins.
A DVI-I connector (Digital Visual Interface - Integrated) supports digital video and analog video signals. It has 29 pins.
!
You can use a TFT/DVI monitor only when a model with the NVIDIA video controller is attached to the multi function bay docking station.
n 90 N
Using Peripheral Devices
Connecting a Multimedia Computer Display
You can connect a multimedia computer display that includes built-in speakers and a microphone to your computer or via the
optional multi function bay docking station.
To connect a multimedia computer display
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.
1
Plug the power cord of the multimedia computer display (1) into an AC outlet.
2
Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the multi function bay
docking station.
3
Plug the speaker cable (4) into the headphones jack (5) on the computer or on the multi function bay docking station.
4
Plug the microphone cable (6) into the microphone jack (7) m on the computer.
n 91 N
Using Peripheral Devices
n 92 N
Using Peripheral Devices
Connecting a TV
You can connect a TV directly to your computer or via the optional multi function bay docking station.
To connect a TV to the computer
1
Plug the power cord of the TV into an AC outlet.
2
Plug one end of the S Video cable (not supplied) into the S VIDEO OUT port on the computer or on the multi function bay
docking station and the other end to the TV.
When your computer is attached to the multi function bay docking station, make sure to use the S VIDEO OUT port on
the docking station.
3
Plug one end of the audio cable (not supplied) into the headphones jack on the computer or on the multi function bay
docking station and the other end to the TV.
4
Switch the input channel of the TV to external input.
5
Set up the TV configuration system.
✍
The multi function bay docking station is also equipped with a VIDEO OUT port. To connect a TV to this port, use a regular video cable.
✍
See the manual that came with your peripheral for more information on installation and use.
If the display resolution of the computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. The hidden area on your
TV can be seen by moving the cursor on the computer. If you want to display the full image, change the display resolution of the computer to 1024 x
768 pixels or lower.
n 93 N
Using Peripheral Devices
Connecting a Projector
You can connect a projector (for example, the Sony LCD projector) directly to your computer or via the optional multi function
bay docking station.
To connect a projector
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.
1
Connect the power cord (1) of the projector into an AC outlet.
2
Plug the RGB signal cable (2) into the monitor (VGA) port (3) a on the computer or on the multi function bay docking
station.
3
Plug the audio cable (4) (not supplied) into the headphones jack (5) on the computer or on the multi function bay docking
station.
4
Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
n 94 N
Using Peripheral Devices
n 95 N
Using Peripheral Devices
Selecting Display Modes
You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected
to your computer.
If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors
Function (page 96) for more information.
To select a display
1
Right-click on the desktop and select NVIDIA Control Panel from the menu.
2
Click the Display icon.
3
Click Change Display Configuration.
4
Follow the on-screen instructions to change the settings.
n 96 N
Using Peripheral Devices
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you
have an external display attached to the monitor (VGA) port, your computer screen and the external display can function as
a single desktop.
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window
or a toolbar, from one display to the other.
✍
Your external display may not support the Multiple Monitors function.
Certain software applications may not be compatible with Multiple Monitors settings.
Make sure that the computer does not enter Standby or Hibernate mode while you are using Multiple Monitors mode; otherwise the computer may not
return to Normal mode.
If you set different colors on each display, do not divide one single window on two displays; otherwise your software may not work properly.
Set fewer colors or a lower resolution for each display.
n 97 N
Using Peripheral Devices
To select the Multiple Monitors mode
1
Right-click on the desktop and select NVIDIA Control Panel from the menu.
2
Click the Display icon.
3
Click Change Display Configuration.
4
Follow the on-screen instructions to change the settings.
✍
You can also change one of the S button assignments to activate the Multiple Monitors mode with the respective S button. To change the S button
assignments, press and hold any S button to display the window for changing the assignment. For details on the S buttons, see Using Special-function
Buttons (page 36).
✍
Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.
n 98 N
Using Peripheral Devices
Connecting an External Microphone
If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone.
To connect an external microphone
Plug the microphone cable (1) into the microphone jack (2) m.
✍
Make sure your microphone is designed for computer use.
n 99 N
Using Peripheral Devices
Connecting a Universal Serial Bus (USB) Device
To prevent your computer and/or USB devices from damage, observe the following:
❑ When moving the computer with USB devices connected, avoid any shock or force to the USB ports.
❑ Do not put the computer into a bag or carrying case when it has USB devices connected.
Connecting a USB Mouse
To connect a USB mouse
1
Choose the USB port (1)
2
Plug the USB mouse cable (2) into the USB port.
You can now use your USB mouse (3).
✍
you prefer to use.
The VAIO USB mouse software driver is preinstalled on the computer. As a result, you only need to plug the USB mouse into the USB port and you can
start working.
n 100 N
Using Peripheral Devices
Connecting a USB Floppy Disk Drive
You can purchase a USB floppy disk drive and connect it to your computer.
To connect a USB floppy disk drive
1
Choose the USB port (1)
you prefer to use.
2
Plug the USB floppy disk drive cable (2) into the USB port.
Your USB floppy disk drive (3) is now ready for use.
!
When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
n 101 N
Using Peripheral Devices
Disconnecting a USB floppy disk drive
You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in
a power saving mode (Standby or Hibernate) may cause the computer to malfunction.
If the computer is off, you can unplug the USB cable directly from the computer.
To disconnect a USB floppy disk drive
1
Close all programs accessing the floppy disk drive.
2
Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.
3
Select the floppy disk drive you want to unplug.
4
Click Stop.
The Stop a Hardware device window appears.
5
Make sure the floppy disk drive is selected, and click OK.
A message appears stating it is now safe to remove the hardware device.
6
Click Close to close the Safely Remove Hardware window.
7
Remove the floppy disk drive from the computer.
n 102 N
Using Peripheral Devices
Connecting a Printer
You can connect a Windows-compatible printer to your computer to print documents.
Connecting a Printer Using the USB Port
You can connect a USB printer compatible with your version of Windows to the computer.
To connect a printer using the USB port
1
Plug the printer power cord into an AC outlet (1).
2
Choose the USB port (3)
3
Plug one end of a USB printer cable (2) into the USB port and the other end to your printer.
you prefer to use.
n 103 N
Using Peripheral Devices
Connecting an i.LINK Device
Notes on connecting i.LINK devices
❑ The computer includes an i.LINK (IEEE 1394) port, which you can use to connect to an i.LINK device such as a digital
video camcorder or to connect two VAIO computers in order to copy, delete or edit files.
❑ The i.LINK port on the computer does not supply power to external devices generally powered by i.LINK ports.
❑ The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of
the external device.
❑ i.LINK cables compatible with the computer include cables with the following part numbers:
VMC-IL4415 (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408 Series (a 0.8 meter cable with a 4-pin
connector at each end).
❑ The optional i.LINK cables may not be available, depending on the country or area of your residency.
❑ An i.LINK connection with other compatible devices is not fully guaranteed.
❑ The i.LINK connection varies depending on the software applications, operating system and i.LINK compatible devices
you use. Refer to the manual that came with your software for more information.
❑ Check the working conditions and OS compatibility of i.LINK-compatible PC peripherals (for example, an HDD or CD-RW
drive) before you connect them to the computer.
n 104 N
Using Peripheral Devices
Connecting a Digital Video Camcorder
To connect a digital video camcorder
1
Plug one end of the i.LINK cable (1) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports
(3) on the digital video camcorder.
2
Launch the DVgate Plus software.
✍
On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible.
The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently.
You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.
n 105 N
Using Peripheral Devices
Connecting to a Network (LAN)
You can connect your computer to 1000BASE-T*/100BASE-TX/10BASE-T-type networks via an Ethernet network cable.
Connect one end of an optional network cable to the network (Ethernet) port on the computer or the optional multi function
bay docking station and the other end to your network. For detailed settings and devices needed to connect to the network,
see your network administrator.
*
Available only via the network (Ethernet) port on the optional multi function bay docking station.
✍
The computer can be connected to the network with the default settings.
When the computer is attached to the optional multi function bay docking station, you need to select which network (Ethernet) port to use. Follow the
on-screen instructions.
n 106 N
Using Peripheral Devices
!
Telephone lines cannot be connected to the network (LAN) connector on your computer.
If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage,
overheating or fire.
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)
- Public telephone subscriber line
- PBX (private branch exchange)
!
Do not plug a telephone cable into the network port.
n 107 N
Customizing Your VAIO Computer
Customizing Your VAIO Computer
This section briefly describes how to change the main settings of your computer. Among other things, you will learn how to
use and customize the look of your Sony software and utilities, etc.
❑ Setting the Password (page 108)
❑ Setting Up Your Computer with VAIO Control Center (page 110)
❑ Using the Power Saving Modes (page 111)
❑ Managing Power with VAIO Power Management (page 116)
❑ Configuring Your Modem (page 118)
n 108 N
Customizing Your VAIO Computer
Setting the Password
Use one of the BIOS functions to set the password.
Once you have set the password, you will have to enter the password after the VAIO logo appears to start your computer.
The power-on password will allow you to protect your computer from unauthorized access.
Adding the Power-on Password
!
Once you have set the power-on password, you cannot start the computer without entering the password. Make sure not to forget the password. Write
down your password and keep it safe and private from other people.
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in
for depot service for password reset.
To add the power-on password
1
Turn on the computer.
2
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
4
On the password entry screen, enter the password twice and press the Enter key.
The password can be up to 32 alphanumeric characters (including spaces) long.
5
At the confirmation prompt, press the Enter key.
✍
The following is to configure the computer to prompt password entry when you turn it on or display the BIOS setup screen.
n 109 N
Customizing Your VAIO Computer
6
Select Password when Power ON under Security.
Press the space bar to change the setting from Disabled to Enabled.
7
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.
On the Setup Confirmation screen, make sure that Yes is selected and then press the Enter key.
Changing/Removing the Power-on Password
To change or remove the power-on password
1
Turn on the computer.
2
Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3
Enter the current password for Enter Password and press the Enter key.
4
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
5
On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
When confirmation to save the changes is prompted, press the Enter key.
6
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.
On the Setup Confirmation screen, confirm that Yes is selected and then press the Enter key.
n 110 N
Customizing Your VAIO Computer
Setting Up Your Computer with VAIO Control Center
The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior.
To use VAIO Control Center
1
Click Start, point to All Programs, and click VAIO Control Center.
The VAIO Control Center window appears.
2
Select the desired control item and change the settings.
3
Once finished, click OK.
The setting of the desired item has been changed.
✍
For more information about each option, click Help on the VAIO Control Center window to display the help file.
Some of the control items will not be visible if you open VAIO Control Center as a limited user.
n 111 N
Customizing Your VAIO Computer
Using the Power Saving Modes
When you use a battery as the power source for your computer, you can take advantage of power management settings to
conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer
has two distinct power saving modes: Standby and Hibernate. When using battery power, you should be aware that the
computer automatically enters Hibernate mode when the remaining battery charge becomes short, regardless of the power
management setting you select.
!
If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully
charged battery.
Using Normal Mode
This is the normal state of the computer when it is in use. The green power indicator light is on in this mode. To save power
while not working, you can turn off a specific device such as the LCD screen or the hard disk.
n 112 N
Customizing Your VAIO Computer
Using Standby Mode
Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber
power light flashes in this mode.
To activate Standby mode
1
Click Start and then Turn Off Computer.
2
Click Stand By.
To return to Normal mode
Press any key.
!
If you press the power button for more than four seconds, the computer will turn off automatically. You will lose any unsaved data.
✍
When the computer is in Standby mode, you cannot insert a disc.
The computer comes out of Standby mode quicker than out of Hibernate mode.
Standby mode uses more power than Hibernate mode.
!
If the battery runs down when the computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is impossible.
To avoid loss of data, you should save your data frequently.
If the computer is not used for 25 minutes, it will enter Standby mode. To avoid this, you can change the Standby mode
settings.
n 113 N
Customizing Your VAIO Computer
To change the Standby mode settings
1
Click Start and then Control Panel.
2
Click Performance and Maintenance.
3
Click Power Options.
The Power Options Properties window appears.
4
Select the Power Schemes tab.
5
Change the System Standby settings.
n 114 N
Customizing Your VAIO Computer
Using Hibernate Mode
In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs
down, no data will be lost. The power indicator light is off in this mode.
To activate Hibernate mode
Press the Fn+F12 keys.
The Hibernating screen appears and the computer enters Hibernate mode.
Alternatively,
1
Click Start and then Turn Off Computer.
2
Click Hibernate.
To return to Normal mode
Turn on the computer by pressing the power button.
The computer returns to its previous state.
!
If you press the power button for more than four seconds, the computer will turn off automatically.
n 115 N
Customizing Your VAIO Computer
✍
If you do not use the computer for a long period of time, put the computer into Hibernate mode. This power saving mode saves you the time of shutting
down or resuming.
When the computer is in Hibernate mode, you cannot insert a disc.
Hibernate mode requires more time than Standby mode to be activated.
It takes more time to return to Normal mode from Hibernate mode than from Standby mode.
Hibernate mode uses less power than Standby mode.
!
Do not move the computer until its power indicator light turns off.
n 116 N
Customizing Your VAIO Computer
Managing Power with VAIO Power Management
Power management helps you set up power schemes for running on AC power or batteries to suit your requirements for
power consumption.
VAIO Power Management is a software application developed exclusively for VAIO computers. With this software
application, you can enhance the Windows power management functions to ensure better operations of your computer and
longer battery life. For more information on VAIO Power Management, see the help file on the VAIO Power Management
software.
Activating VAIO Power Management
When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you
are using at that time, for example, AC power. If you double-click this icon, the window appears showing your power status.
VAIO Power Management functionalities are added to the Windows Power Options Properties.
To activate VAIO Power Management
1
Click Start and then Control Panel.
2
Click Performance and Maintenance.
3
Click Power Options.
The Power Options Properties window appears.
4
Select the VAIO Power Management tab.
To restore the default settings
1
On the VAIO Power Management tab, click Advanced.
The VAIO Power Management window appears.
2
Follow the on-screen instructions to change the settings.
n 117 N
Customizing Your VAIO Computer
Activating VAIO Power Management Power Schemes
VAIO Power Management provides several predefined power schemes. Each power scheme consists of a group of power
management settings that are designed to meet specific power management goals, ranging from maximum power
management to no power management.
To activate a VAIO Power Management power scheme
1
Click Start and then Control Panel.
2
Click Performance and Maintenance.
3
Click Power Options.
The Power Options Properties window appears.
4
Select the tab for power scheme settings.
5
Select a power scheme from the drop-down list.
6
If you now select the VAIO Power Management tab, you see that the selected power scheme appears on the tab.
7
If necessary, you can change the items in the list, for example, the LCD brightness of your computer screen.
8
Click OK.
The power scheme has been activated.
✍
You must have administrator rights on the computer to set up a power scheme.
n 118 N
Customizing Your VAIO Computer
Configuring Your Modem
Before you can start using your internal modem (not all modem are built-in), or each time you use your modem while traveling,
make sure that the country of the active location defined in the Phone and Modem Options dialog box matches the country
you are dialing from.
To change your modem country settings
1
Click Start and then Control Panel.
2
Click Printers and Other Hardware.
3
Double-click Phone and Modem Options.
The Phone and Modem Options window appears.
If you do not see the Phone and Modem Options window, click Switch to Classic View on the left side.
4
Select your location on the Dialing Rules tab.
5
Click the Edit button to change the current configuration.
The Edit Location window appears.
Or
Click the New button to configure your modem.
The New Location window appears.
6
Check the country/region settings, and make sure it matches the place you are dialing from.
✍
Pulse dial may not be supported in some counties and/or regions.
n 119 N
Customizing Your VAIO Computer
7
If you modified your location settings, click Apply, and then OK.
The Phone and Modem Options window appears.
8
Check that your modem is listed in the Modems tab.
If your modem is not listed, click Add and follow the wizard.
9
Click Apply/OK. Your modem is configured.
✍
Before applying new country settings, please make sure your phone cable is disconnected from your computer.
n 120 N
Upgrading Your VAIO Computer
Upgrading Your VAIO Computer
Your computer and memory modules use high precision components and electronic connectors technology. To avoid the
invalidation of your guarantee due to mishandling, we recommend that:
❑ You contact your dealer to install a new memory module.
❑ You do not install it yourself, if you are not familiar with upgrading memory on a computer.
❑ You do not touch the connectors or open the memory panel.
For the type of module and amount of memory installed on your model, refer to the online Specifications.
Contact VAIO-Link if you need assistance.
n 121 N
Upgrading Your VAIO Computer
Adding and Removing Memory
If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules.
Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available
slots depends on the configuration of your model.
Notes on adding/removing memory modules
❑ Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This
damage may void your manufacturer's warranty.
❑ Only use memory modules that are compatible with the computer. If a memory module is not detected by the computer
or Windows becomes unstable, contact your sales dealer or the manufacturer of your memory module.
❑ Electrostatic discharge can damage electronic components. Before touching a memory module, ensure the following:
❑ The procedures described in this document assume familiarity with the general terminology associated with personal
computers and with the safety practices and regulatory compliance required for using and modifying electronic
equipment.
❑ Turn off the computer and disconnect the system from its power source (that is, battery or AC adapter) and from any
telecommunication links, networks, or modems before you open the computer. Failure to do so may result in personal
injury or equipment damage.
❑ Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory module only
at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials
that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with
an unpainted metal portion of the chassis while performing the procedure.
❑ Do not open the memory module package until you are ready to change the module. The package protects the module
from ESD.
n 122 N
Upgrading Your VAIO Computer
❑ Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from electrostatic
discharge.
❑ Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the
computer, will result in damage to the computer and any repair costs will not be covered by the warranty.
❑ Do not place the memory module in places subject to:
❑ Heat sources such as radiators or air ducts
❑ Direct sunlight
❑ Excessive dust
❑ Mechanical vibration or shock
❑ Strong magnets or speakers that are not magnetically shielded
❑ Ambient temperature of more than 35°C or less than 5°C
❑ High humidity
❑ Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the
components and circuit boards inside the computer.
n 123 N
Upgrading Your VAIO Computer
Removing and Installing a Memory Module
To change or add a memory module
1
Shut down the computer and disconnect all peripheral devices.
2
Unplug the computer and remove the battery pack.
3
Wait until the computer cools down.
4
Unscrew the screws (indicated by the arrows below) on the bottom of the computer and remove the memory module
compartment cover.
5
Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity.
n 124 N
Upgrading Your VAIO Computer
6
Remove the memory module:
❑ Pull the latches in the direction of the arrows (1).
The memory module is released.
❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).
7
Remove the new memory module from its packaging.
n 125 N
Upgrading Your VAIO Computer
8
Slide the memory module into the memory module slot and push it in until it clicks into place.
!
If you use only one memory module, make sure to insert it to the slot that is closer to the back of your computer.
Do not touch any other components on the motherboard.
9
Replace the memory module compartment cover.
10 Tighten the screws on the bottom of the computer.
11 Reinstall the battery and turn on the computer.
n 126 N
Upgrading Your VAIO Computer
Viewing the Amount of Memory
To view the amount of memory
1
Turn on the computer.
2
Click Start, point to All Programs, and click VAIO Control Center.
3
Double-click the System Information folder in the VAIO Control Center window.
4
Double-click the System Information icon in the System Information folder.
You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and
restart the computer.
n 127 N
Precautions
Precautions
This section describes safety guidelines and precautions to help you protect your computer from potential damage.
❑ On Handling the LCD Screen (page 128)
❑ On Using the Power Source (page 129)
❑ On Handling Your Computer (page 130)
❑ On Using the Built-in MOTION EYE Camera (page 132)
❑ On Handling Floppy Disks (page 132)
❑ On Handling Discs (page 133)
❑ On Using the Battery Pack (page 134)
❑ On Using Headphones (page 135)
❑ On Handling Memory Stick Media (page 135)
❑ On Handling the Hard Disk (page 136)
❑ On Handling the Memory Card Adapter (page 137)
n 128 N
Precautions
On Handling the LCD Screen
❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using the computer
near a window.
❑ Do not scratch the LCD screen or exert pressure on it. This could cause a malfunction.
❑ Using the computer in low temperature conditions may produce a residual image on the LCD screen. This is not a
malfunction. When the computer returns to normal temperature, the screen returns to normal.
❑ A residual image may appear on the LCD screen if the same image is displayed for a lengthy period of time. The residual
image disappears in a while. You can use a screen saver to prevent residual images.
❑ The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.
❑ The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright
points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing
process and does not indicate a malfunction.
❑ Avoid rubbing the LCD screen. This could damage the screen. Use a soft, dry cloth to wipe the LCD screen.
n 129 N
Precautions
On Using the Power Source
❑ See the online Specifications to check the power operation of your model.
❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder.
❑ You can purchase a power strip with a surge protector. This device prevents damage to the computer caused by sudden
power surges, in an electrical storm, for example.
❑ Do not place heavy objects on the power cord.
❑ To disconnect the cord, pull it out by the plug. Never pull the cord itself.
❑ Unplug the computer from the AC outlet if you are planning to not use the computer for a long time.
❑ Make sure that the AC outlet is easily accessible.
❑ When the AC adapter is not used, unplug it from the AC outlet.
❑ Use the AC adapter supplied with the computer or genuine Sony products. Do not use any other AC adapter as it may
cause a malfunction.
n 130 N
Precautions
On Handling Your Computer
❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of the computer.
❑ If you drop a solid object or any liquid onto the computer, shut down the computer and then unplug it. You may want to
have the computer checked by qualified personnel before operating it again.
❑ Do not drop the computer or place heavy objects on top of the computer.
❑ Do not place the computer in a location subject to:
❑ Heat sources, such as radiators or air ducts
❑ Direct sunlight
❑ Excessive dust
❑ Moisture or rain
❑ Mechanical vibration or shock
❑ Strong magnets or speakers that are not magnetically shielded
❑ Ambient temperature of more than 35°C or less than 5°C
❑ High humidity
❑ Do not place electronic equipment near the computer. The electromagnetic field of the computer may cause a
malfunction.
❑ Provide adequate air circulation to prevent internal heat from building up. Do not place the computer on porous surfaces
such as rugs or blankets, or near material such as curtains or draperies that may block its ventilation slots.
❑ The computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs,
relocate the computer a suitable distance away from the set.
❑ Use only specified peripheral equipment and interface cables; otherwise, problems may occur.
n 131 N
Precautions
❑ Do not use cut or damaged connection cables.
❑ If the computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this
case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact
VAIO-Link.
❑ Make sure you disconnect the power cord before cleaning the computer.
❑ To avoid losing data if the computer is damaged, back up your data regularly.
n 132 N
Precautions
On Using the Built-in MOTION EYE Camera
❑ Do not touch the front mirror plate over the lens of the built-in MOTION EYE camera, as it may make scratches on the
plate and such scratches will appear on the captured images.
❑ Do not let the direct sunlight get into the scope of the built-in MOTION EYE camera regardless of the computer's power
state, as it may cause a malfunction of the camera.
❑ The built-in MOTION EYE camera is disabled while videos or still images are imported from an i.LINK-compatible device
connected to the S400 (i.LINK) connector.
❑ Clean the front mirror plate over the lens of the built-in MOTION EYE camera with a blower brush or a soft brush. If the
lens is extremely dirty, wipe it off with a soft dry cloth. Do not rub the plate, as it is force-sensitive.
On Handling Floppy Disks
❑ Do not open the shutter manually or touch the surface of the floppy disk.
❑ Keep floppy disks away from magnets.
❑ Keep floppy disks away from direct sunlight and other sources of heat.
❑ Keep the floppy disk away from any liquid. Do not let the floppy disk get wet. When you are not using the floppy disk,
always remove it from the floppy disk drive and use a storage case.
❑ If the floppy disk comes with an adhesive label, make sure that the label is properly affixed. If the edge of the label is
curled up, the label may stick to the inside of the floppy disk drive and cause a malfunction or damage your floppy disk.
n 133 N
Precautions
On Handling Discs
❑ Do not touch the surface of the disc.
❑ Do not drop or bend the disc.
❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole,
as shown below:
❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol,
commercially available cleaners, or anti-static spray) which may cause damage to the disc.
❑ For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center out.
❑ If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from
the center out. Wipe off any remaining moisture with a dry soft cloth.
❑ Never affix an adhesive label on discs. This will affect the use of the disc irreparably.
n 134 N
Precautions
On Using the Battery Pack
❑ Do not leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight.
❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.
❑ Charge the batteries at temperatures between 10°C to 30°C. Lower temperatures require a longer charging time.
❑ Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this notebook only
functions with genuine Sony batteries designed for this model. When inserting another kind of battery, the battery will not
be charged and the notebook will not function.
❑ While the battery is in use or being charged, the battery pack heats up. This is normal and is not cause for concern.
❑ Keep the battery pack away from all sources of heat.
❑ Keep the battery pack dry.
❑ Do not open or try to disassemble the battery pack.
❑ Do not expose the battery pack to any mechanical shock.
❑ If you are not using the computer for an extended period of time, remove the battery pack from the computer to prevent
damage to the battery.
❑ If, after fully charging the battery pack, the battery power is still low, the battery pack may be reaching the end of its life
and should be replaced.
❑ You do not need to discharge the battery before recharging.
❑ If you have not used the battery pack for a considerable amount of time, recharge the battery.
n 135 N
Precautions
On Using Headphones
❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic
hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at
pedestrian crossings.
❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.
On Handling Memory Stick Media
❑ Do not use the media in locations that are subject to static electricity or electrical noise.
❑ Do not touch the Memory Stick media connector with your finger or metallic objects.
❑ Use only the adhesive label supplied with the Memory Stick media as a label.
❑ Do not bend, drop, or apply strong shock to the Memory Stick media.
❑ Do not disassemble or modify Memory Stick media.
❑ Do not let Memory Stick media get wet.
❑ Do not use or store Memory Stick media in a location subject to:
❑ Extremely high temperatures, such as in a car parked in the sun
❑ Direct sunlight
❑ High humidity
❑ Corrosive substances
❑ Use the storage case supplied with the Memory Stick media.
n 136 N
Precautions
On Handling the Hard Disk
The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by
mechanical vibration, shock or dust.
Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you
should be careful when handling the computer.
To avoid damaging your hard disk
❑ Do not subject the computer to sudden movements.
❑ Keep the computer away from magnets.
❑ Do not place the computer in a location subject to mechanical vibration or in an unstable position.
❑ Do not move the computer while the power is on.
❑ Do not turn off the power or restart the computer while reading or writing data to disk.
❑ Do not use the computer in a place subject to extreme changes in temperature.
✍
If the hard disk is damaged, the data cannot be restored.
n 137 N
Precautions
On Handling the Memory Card Adapter
❑ Do not touch the memory card adapter connector with your finger or metallic objects.
❑ Use only the adhesive label exclusively designed for the memory card adapter as a label.
❑ Do not bend, drop, or apply strong shock to the memory card adapter.
❑ Do not disassemble or modify the memory card adapter.
❑ Do not let the memory card adapter get wet.
❑ Do not use or store the memory card adapter in a location subject to:
❑ Extremely high temperatures, such as in a car parked in the sun
❑ Direct sunlight
❑ High humidity
❑ Corrosive substances
❑ Use the storage case supplied with the memory card adapter.
n 138 N
Troubleshooting
Troubleshooting
This section describes how to solve common problems you might encounter when using your computer. Many problems have
simple solutions. Try these suggestions before contacting VAIO-Link.
❑ Computer (page 140)
❑ System Security (page 148)
❑ Battery (page 150)
❑ Built-in MOTION EYE Camera (page 152)
❑ Internet (page 155)
❑ Networking (page 157)
❑ Bluetooth Technology (page 160)
❑ CDs and DVDs (page 164)
❑ Display (page 169)
❑ Printing (page 173)
❑ Microphone (page 174)
❑ Mouse (page 175)
❑ Speakers (page 176)
❑ Touch Pad (page 177)
❑ Keyboard (page 178)
❑ Floppy Disks (page 179)
❑ PC Cards (page 180)
❑ Audio/Video (page 181)
n 139 N
Troubleshooting
❑ Memory Stick Media (page 182)
❑ Peripherals (page 183)
❑ Multi Function Bay Docking Station (page 184)
n 140 N
Troubleshooting
Computer
What should I do if my computer does not start?
❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows
the power is on.
❑ Make sure the battery is installed properly and charged.
❑ Make sure the floppy disk drive (if applicable) is empty.
❑ If your computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS
is plugged into a power source and turned on.
❑ If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness
and contrast controls are adjusted correctly. See the manual that came with your display for more information.
❑ Disconnect the AC adapter and remove the battery. Wait three to five minutes. Reattach the AC adapter and reinstall the
battery, and press the power button to turn on your computer.
❑ Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.
❑ Remove any extra memory modules you may have inserted since purchase.
❑ Check that you are using the supplied Sony AC adapter. For your safety, use only genuine Sony rechargeable battery
packs and AC adapters, which are supplied by Sony for your VAIO computer.
n 141 N
Troubleshooting
What should I do if a BIOS error appears when I turn on my computer?
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of your computer screen, follow these steps:
1
Press the F2 key.
The BIOS setup screen appears.
2
Set the date (month/day/year). Press the Enter key.
3
Press the m key to select System Time, and then set the time (hour: minute: second). Press the Enter key.
4
Press the , key to select the Exit tab, and then press the F9 key.
The message Load default configuration now? appears.
5
Select Yes, and press the Enter key.
6
Select Exit (Save Changes) or Exit Setup, and press the Enter key.
The message Save configuration changes and exit now? appears.
7
Select Yes, and press the Enter key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
What should I do if the power indicator (Green) lights but my computer screen stays
blank?
Follow these steps:
1
Press the power button for more than four seconds to check that the power indicator goes out. Then turn on your computer
again.
2
If your computer screen still stays blank, unplug the AC adapter, remove the battery, and leave the computer for about a
minute. Then plug in the AC adapter, install the battery, and turn on the computer again.
n 142 N
Troubleshooting
What should I do if my computer or software stops responding?
❑ It is best to turn off your computer using the Turn Off Computer option on the Microsoft Windows Start menu, located
on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data.
❑ Click Start, point to Turn Off Computer, and then click Turn Off.
❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously. When the Windows Task Manager
window appears, click Turn Off from the Shut Down menu.
When the Windows Security window appears, click Shut Down.
❑ If your computer still does not turn off, press and hold the power button or slide and hold the power switch until the
computer turns off.
❑ If your computer stops responding while playing a CD or DVD, press the Ctrl+Alt+Delete keys simultaneously. You can
turn off the computer from Windows Task Manager.
!
Pressing the Ctrl+Alt+Delete keys simultaneously or turning off your computer with the power button or switch may cause loss of data.
❑ Remove the AC adapter and battery.
❑ Try reinstalling the software.
❑ Contact the software publisher or designated provider for technical support.
n 143 N
Troubleshooting
Why doesn't my computer enter Standby or Hibernate mode?
Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or
Hibernate.
To restore your computer to normal operating stability
1
Close all open programs.
2
Click Start, Turn Off Computer, and then Restart.
3
If your computer does not restart, press the Ctrl+Alt+Delete keys simultaneously.
In the Windows Task Manager window, select Restart from the Shut Down menu to restart the computer.
4
If this procedure does not work, press and hold the power button or slide and hold the power switch until the computer
turns off.
What should I do if the battery indicator is flashing and my computer does not start?
❑ This symptom could be due to the battery pack not being installed properly. To resolve this symptom, turn off your
computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing
the Battery Pack (page 26).
❑ If the symptom persists after performing the above, it means the installed battery pack is not compatible. Remove the
battery pack and contact VAIO-Link.
n 144 N
Troubleshooting
What should I do if a message window, notifying of incompatibility or improper installation
of the battery pack, appears and my computer enters Hibernate mode?
❑ This symptom could be due to the battery pack not being installed properly. To resolve this symptom, turn off your
computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing
the Battery Pack (page 26).
❑ If the symptom persists after performing the above, it means the installed battery pack is not compatible. Remove the
battery pack and contact VAIO-Link.
Why is the sound of my computer's fan so loud?
Your computer's fan may be running at a high speed to cool the CPU. By lowering the CPU speed, you also lower the speed
and noise level of the computer's fan. You can use the power schemes to lower the CPU speed.
To lower the CPU speed using the power schemes*
1
Click Start and then Control Panel.
2
Click Performance and Maintenance, and click Power Options.
The Power Options Properties window appears.
3
Select Portable/Laptop in the Power schemes box.
4
Click Apply.
5
Click OK.
*
Available on selected models only.
n 145 N
Troubleshooting
Why does the System Properties window display a slower CPU speed than the
maximum?
This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation
purposes, System Properties may display the CPU's current speed instead of the maximum speed.
What should I do if Windows does not start, showing a message, when I start my
computer?
If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and
Windows will not start. Press the power button for more than four seconds to check that the power indicator goes off. Wait
for 10 or 15 seconds, then restart your computer and enter the correct password. When entering the password, check that
the Num lock indicator and Caps lock indicator are off. If any are lit, press the Num Lk key or the Caps Lock key to turn off
the indicator before entering the password.
What should I do if my game software does not work or it keeps crashing?
❑ Check the web site of the game if there are any patches or updates to download.
❑ Make sure you have installed the latest video driver.
❑ On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is
not guaranteed.
What should I do if I cannot remember the BIOS password?
If you have forgotten the BIOS password, contact VAIO-Link to reset it. A reset fee will be charged.
n 146 N
Troubleshooting
Why does it take time before my computer starts?
If Norton Internet Security's Personal Firewall is active, it may take some time before the desktop screen appears due to
network security checkups.
Why doesn't my computer screen turn off when the time selected for the automatic turnoff action has passed?
The originally selected VAIO's screen saver disables the timer setting, which you can select using the Windows power
options, for your computer screen to turn off.
Change the originally selected VAIO's screen saver.
What should I do if I cannot boot my computer from the USB floppy disk drive connected
to the computer?
To boot your computer from the USB floppy disk drive, you need to change the boot device.
Turn on your computer and press the F11 key when the VAIO logo appears.
n 147 N
Troubleshooting
How can I change the volume of the startup sound?
To change the startup sound volume
1
Press the F2 key.
The BIOS setup screen appears.
2
Press the < or , key to select Advanced.
3
Press the M or m key to select Speaker Volume and press the Enter key.
4
Press the M or m key to select the speaker volume at startup and press the Enter key.
5
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.
The message Save configuration changes and exit now? appears.
6
Select Yes and press the Enter key.
Your computer restarts and you will hear the startup sound at the specified volume level.
✍
You can also show/hide the VAIO animation logo at startup. On the screen that is displayed after step 2 above, select VAIO Animation Logo or Show
VAIO Animation Logo and press the Enter key to proceed with the setting. Hiding the VAIO animation logo will also turn off the startup sound.
n 148 N
Troubleshooting
System Security
This section provides information about keeping your computer operating smoothly and protecting against potential threats
to the computer's security.
How can I protect my computer against security threats, such as viruses?
The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against
security threats, such as viruses, is to download and install the latest Windows updates regularly.
You can get important Windows updates by doing the following:
!
Your computer must be connected to the Internet before you can receive updates.
1
Connect to the Internet.
2
Click the Automatic Updates icon on the taskbar.
3
Follow the on-screen instructions to set up automatic or scheduled updates.
n 149 N
Troubleshooting
How do I keep my antivirus software updated?
You can keep the Norton Internet Security software program current with the latest updates from Symantec Corporation.
To download and install the latest security update
1
2
Double-click the Norton Internet Security icon on the taskbar. If you have not previously registered the antivirus
software, a series of information wizards appears.
1
Follow the on-screen instructions to complete each wizard.
2
Double-click the Norton Internet Security icon again.
The Norton Internet Security window appears.
If you have previously registered this antivirus software, the Norton Internet Security window automatically appears.
Follow the on-screen instructions to select and download updates.
n 150 N
Troubleshooting
Battery
How do I find the battery charging status?
See Charging the Battery Pack (page 28).
When is my computer using AC power?
When your computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed.
When should I recharge the battery?
❑ When the battery level falls below 10 percent.
❑ When both the battery and power indicators blink.
❑ When you have not used the battery for a long time.
When should I replace the battery?
If the battery power is still low after charging it, the battery may be reaching the end of its life and should be replaced.
Should I be concerned that the installed battery is warm?
No, it is normal for the battery to be warm when it is powering your computer.
n 151 N
Troubleshooting
Can my computer enter Hibernate mode while using battery power?
Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices
prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering
Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 114) for information on
how you can manually activate Hibernate mode.
Why doesn't my computer enter Hibernate mode?
You may first need to enable Hibernate mode. Follow these steps:
1
Click Start and then Control Panel.
2
Click Performance and Maintenance.
3
Click Power Options.
The Power Options Properties window appears.
4
Select the Hibernate tab.
5
Click to check the box next to Enable hibernation.
n 152 N
Troubleshooting
Built-in MOTION EYE Camera
Why does the viewer window show no images or poor-quality images?
❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
❑ The video memory of your computer may have become insufficient for displaying images from the built-in MOTION EYE
camera. Lowering the resolution or reducing the colors of the LCD screen might help.
❑ The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is
normal and does not indicate a malfunction.
❑ If the problem persists, restart your computer.
Why are captured images poor in quality?
❑ The images captured under the fluorescent lamp may show reflection of the light.
❑ A dark portion in captured images may appear as a noise.
❑ If the front mirror plate over the lens is dirty, you cannot take a clear shot. Clean the lens. See On Using the Built-in
MOTION EYE Camera (page 132).
Why do captured images contain dropped frames and audio interruptions?
❑ The effect settings on your software application may have caused dropped frames. See the help file on your software
application for more information.
❑ There may be more software applications running than your computer can handle. Exit the applications that you are not
currently using.
❑ The power management function of your computer may have been activated. Check the CPU performance.
n 153 N
Troubleshooting
Why does movie playback show dropped frames when my computer is running on the
battery?
The battery is running out of power. Connect your computer to an AC power source.
Why do the images captured by the built-in MOTION EYE camera flicker?
This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output
frequency and shutter speed.
To reduce flicker noise, change the pointing direction of the camera or the screen brightness. In some software applications,
you can set an appropriate value to Flickness, one of the camera properties, to eliminate flicker noise.
Why is the video input from the built-in MOTION EYE camera suspended for a few
seconds?
The video input may be suspended for a few seconds if
❑ a shortcut key with the Fn key is used.
❑ the CPU load increases.
This is normal and does not indicate a malfunction.
n 154 N
Troubleshooting
Why can't I use the built-in MOTION EYE camera?
❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
❑ If the problem persists, you must reinstall the driver software for the camera. Follow these steps:
1
Click Start and then Control Panel.
2
Click the Performance and Maintenance icon.
3
Click the System icon.
4
Click Device Manager on the Hardware tab.
5
Double-click Imaging devices.
6
Right-click Sony Visual Communication Camera VGP-VCC1 and click Update Driver.
What should I do if my computer becomes unstable when it enters Standby or Hibernate
mode while the built-in MOTION EYE camera is in use?
❑ Do not place your computer into Standby or Hibernate mode while you are using the built-in MOTION EYE camera.
❑ If your computer automatically enters Standby or Hibernate mode, change the respective power saving mode setting. For
changing the setting, see Using the Power Saving Modes (page 111).
n 155 N
Troubleshooting
Internet
What should I do if my modem does not work?
❑ Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack.
❑ Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.
❑ Make sure the telephone number the program is dialing is correct.
❑ Make sure the software you are using is compatible with your computer's modem. (All preinstalled Sony programs are
compatible.)
❑ Make sure the modem is the only device connected to your phone line.
❑ Follow these steps to check the settings:
1
Click Start and then Control Panel.
2
Click Printers and Other Hardware.
3
Click Phone and Modem Options.
4
On the Modems tab, check that your modem is listed.
5
On the Dialing Rules tab, check the location information is correct.
n 156 N
Troubleshooting
Why is my modem connection slow?
Your computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed,
including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think
your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider (ISP),
do any of the following:
❑ Ask your telephone company to verify your telephone line is free of any line noise.
❑ If your problem is fax-related, make sure there are no problems with the fax machine you are calling and that it is
compatible with fax modems.
❑ If you are having a problem connecting with your ISP, make sure the ISP is not experiencing technical problems.
❑ If you have a second telephone line, try connecting the modem to that line.
n 157 N
Troubleshooting
Networking
What should I do if my computer cannot connect to a wireless LAN access point?
❑ Connection availability is affected by distance and obstructions. You may need to move your computer away from
obstructions or closer to any access point you may be using.
❑ Make sure the WIRELESS or WIRELESS LAN switch is on and the WIRELESS LAN indicator is lit on your computer.
❑ Make sure power to the access point is on.
❑ Follow these steps to check the settings:
1
Click Start and then Control Panel.
2
Click Network and Internet Connections.
3
Click Network Connections.
4
Right-click Wireless Network Connection.
5
Click Properties.
6
Click the Wireless Networks tab.
7
Click View Wireless Networks to see that your access point is selected.
❑ Make sure the encryption key is correct.
What should I do if I cannot access the Internet?
❑ Check the access point settings. See the manual that came with your access point for more information.
❑ Make sure your computer and the access point are connected to one another.
❑ Move your computer away from obstructions or closer to any access point you may be using.
❑ Make sure your computer is properly configured for Internet access.
n 158 N
Troubleshooting
Why is the data transfer speed slow?
❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other
factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed,
move your computer away from obstructions or closer to any access point you may be using.
❑ If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other
devices are communicating via the access point.
❑ If your access point interferes with other access points, change the access point channel. See the manual that came with
your access point for more information.
How do I avoid data transfer interruptions?
❑ When your computer is connected to an access point, data transfer interruptions may occur when using large files or if
the computer is in close proximity to microwaves and cordless telephones.
❑ Move your computer closer to the access point.
❑ Make sure the access point connection is intact.
❑ Change the access point channel. See the manual that came with your access point for more information.
n 159 N
Troubleshooting
What are channels?
❑ Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access
point channels may be preset to different channels from Sony devices.
❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your
access point.
Why does the network connection stop when I change the encryption key?
Two computers with built-in wireless LAN may lose a peer-to-peer network connection if the encryption key is changed. You
can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.
n 160 N
Troubleshooting
Bluetooth Technology
What should I do if other Bluetooth devices cannot discover my computer?
❑ Make sure both devices have the Bluetooth feature enabled.
❑ If the Bluetooth indicator is off, turn on the WIRELESS switch.
❑ You cannot use the Bluetooth functionality when your computer is in a power saving mode. Return to normal mode, then
turn on the WIRELESS switch.
❑ Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within
10 meters of each other.
Why can't my computer discover other Bluetooth devices?
If the connected device is also connected to other devices, it may not appear in the Bluetooth utility software or you may not
be able to communicate with the device.
What should I do if I cannot find the Bluetooth device with which I want to communicate?
❑ Check that the Bluetooth functionality of the device with which you want to communicate is on. See the other device's
manual for more information.
❑ If the device with which you want to communicate is already communicating with another Bluetooth device, it may not be
found or it may not be able to communicate with your computer.
❑ To allow other Bluetooth devices to communicate with your computer, right-click the Bluetooth icon
on the taskbar and
select Options from the menu to open the Options window. Then, check if proper security modes are selected on the
Security tab. For details on the security modes, see the help file on the Bluetooth utility software.
For more information on the Bluetooth Device window, see Communicating with Another Bluetooth Device (page 73).
n 161 N
Troubleshooting
What should I do if other Bluetooth devices cannot connect to my computer?
❑ Make sure the other device is authenticated.
❑ Your computer may not allow connections from other devices. To enable Bluetooth device connections, follow these steps:
1
Right-click the Bluetooth icon
on the taskbar.
2
Select Options from the menu.
The Options window appears.
3
Check if Standard or Low is selected for the Bluetooth security level on the Security tab.
If a custom Bluetooth security level is selected, click the Default level button.
4
Click OK.
❑ The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on
radio wave quality, and on the operating system or the software in use. Try to move your computer or to place both devices
closer.
❑ If the device with which you want to communicate is already communicating with another Bluetooth device, it may not be
found or it may not be able to communicate with your computer.
❑ Check that the Bluetooth functionality of the device with which you want to communicate is on. See the other device's
manual for more information.
n 162 N
Troubleshooting
Why is my Bluetooth connection slow?
❑ The data transfer speed depends on the obstacles and/or the distance between the two devices, on the radio wave quality,
and on the operating system or the software in use. Try to move your computer or try to place the two devices closer.
❑ The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices. Bluetooth
devices incorporate technology that minimizes interference from other devices using the same wavelength, however,
communication speed and connection range may be reduced. Interference from other devices may also stop
communication altogether.
❑ Connection availability is affected by distance and obstructions. You may need to move your computer away from
obstructions or closer to the device to which it is connected.
❑ Identify and remove obstacles between your computer and the device to which it is connected.
❑ Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer
due to electromagnetic interference from the environment.
Why does the message requesting authentication appear?
The target Bluetooth enabled device is requesting connection authentication. Mutual authentication is required to enable
Bluetooth communications with this device.
Why can't I connect to service supported by the target Bluetooth device?
Connection is only possible for services also supported by the computer with the Bluetooth functionality. For more details,
see the help file on the Bluetooth utility software.
n 163 N
Troubleshooting
Can I use a device with Bluetooth technology on airplanes?
With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and
airplanes, may have restrictions on the use of Bluetooth devices, due to radio interference. Check with facility staff to see if
use of the Bluetooth feature on the computer is permitted.
Why can't I connect to a Bluetooth device by specifying its IP address on a Personal Area
Network (PAN)?
The Bluetooth utility software uses Dynamic Host Configuration Protocol (DHCP) to assign IP addresses to active wireless
devices. If you specify a fixed IP address for the device to which you want to connect, the utility cannot assign a dynamic IP
address to the device and fails. Do not specify IP addresses when using a PAN.
Why can't I use the Bluetooth functionality when I log on to my computer as a limited user?
The Bluetooth functionality may not be available to users with limited rights on your computer. Log on to the computer as a
user with administrator rights.
Why can't I connect to a Bluetooth device in Personal Area Network User mode?
If the device to which you want to connect supports Bluetooth communication in Personal Area Network User mode only, you
cannot establish a connection from your computer.
Why can't I use the Bluetooth utility software when I switch a user?
If you switch a user without logging off from your system, the Bluetooth utility software will not work successfully. Make sure
to log off before switching a user. To log off from your system, click Start and then Log Off.
n 164 N
Troubleshooting
CDs and DVDs
Why does my computer freeze when I try to read a disc?
The disc that your computer is trying to read may be dirty or damaged. Follow these steps:
1
Restart the computer by clicking Start, Turn Off Computer, and Restart.
2
Eject the disc from the optical disc drive.
3
Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs (page 133) for instructions on how to
clean it.
What should I do if the drive tray does not open?
❑ Make sure your computer is on.
❑ Press the drive eject button.
❑ If the drive eject button does not work, click Start and then My Computer. Right click the optical disc drive icon, and select
Eject from the shortcut menu.
❑ If none of the above options work, insert a thin, straight object (such as a paper clip) in the manual eject hole near the
drive eject button.
❑ Try restarting your computer.
n 165 N
Troubleshooting
What should I do if I cannot play a CD or DVD properly on my computer?
❑ Make sure the disc was inserted into the optical disc drive with the label facing up.
❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions.
❑ If the CD or DVD is dirty or damaged, your computer will stop responding. Follow these steps:
1
Restart the computer by pressing the Ctrl+Alt+Delete keys, and selecting Restart from the Shut Down menu of the
Windows Task Manager window.
2
Remove the CD or DVD from the optical disc drive.
3
Check the disc for dirt or damage. If you need to clean the disc, see On Handling Discs (page 133) for instructions.
❑ If you are playing a CD or DVD and cannot hear sound, do any of the following:
❑ Double-click the Volume icon on the taskbar, and click to cancel the Master Volume Mute All and Wave Mute check
boxes.
❑ Check the volume setting in the audio mixer.
❑ If you are using external speakers, check the volume settings on the speakers and the connections between the
speakers and your computer.
❑ Make sure the CD audio feature is enabled and the correct driver software is installed. Follow these steps:
1
Click Start and then Control Panel.
2
Click Performance and Maintenance.
3
Click System.
The System Properties window appears.
4
Select the Hardware tab, and click Device Manager in the Device Manager box.
A window with a listing of your computer's hardware devices appears.
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the
drivers.
n 166 N
Troubleshooting
5
Double-click the optical disc drive device to open the submenu.
6
Double-click the listed drive, and select the Properties tab.
7
Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected.
You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.
8
Click OK to close the window.
❑ Make sure an adhesive label is not affixed to the CD or DVD. Adhesive labels can come off while the disc is in the optical
disc drive and damage the drive or cause it to malfunction.
❑ If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the DVD package to
make sure the region code is compatible with the optical disc drive.
❑ If you notice condensation on your computer, do not use the computer for at least one hour. Condensation can cause the
computer to malfunction.
❑ Make sure your computer is running on AC power supply and try the disc again.
n 167 N
Troubleshooting
What should I do if I cannot write data to CD media?
❑ Do not launch any software application or allow any to launch automatically, not even a screen saver.
❑ Do not use the keyboard.
❑ Do not use a CD-R/RW disc that has an adhesive label affixed to it. This could cause a write error or other damage.
What should I do if I cannot write data to DVD media?
❑ Make sure you are using the correct DVD recordable media.
❑ Check which DVD recordable format is compatible with your computer's built-in DVD recorder. Note the possibility that
some brands of DVD recordable media do not work.
❑ The preinstalled software on your computer does not support copying DVD movies. Macrovision or a similar video
protection technology prevents users from copying DVD movies. Copying a DVD movie would be a copyright infringement
and therefore illegal.
n 168 N
Troubleshooting
What should I do if I cannot write data to DVD-RAM media using Windows functions?
This Q & A entry applies to selected models only. See the online Specifications to see whether your model is equipped with
the DVD±RW/RAM drive.
Follow these steps to change the settings:
1
Click Start and then My Computer.
2
Right-click the optical disc drive icon and select Properties.
3
Click the Recording tab.
4
Click to cancel the Enable CD recording on this drive check box.
5
Click OK.
!
Canceling the Enable CD recording on this drive check box disables writing data to CD-R and CD-RW discs. To write data to such discs, make sure to
select this check box.
You cannot add data to DVD-RAM discs with data already written by the Roxio DigitalMedia software due to difference in disc formatting. Attempt to
add data to such a disc will re-format the disc, resulting in loss of the entire written data.
n 169 N
Troubleshooting
Display
Why did my computer screen go blank?
❑ Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or
Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using
the Power Saving Modes (page 111) for more information.
❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows
the power is on.
❑ If your computer is using battery power, make sure the battery is installed properly and is charged. See Using the Battery
Pack (page 26) for more information.
❑ If the display mode is set to external display, press the Fn+F7 keys. See Combinations and Functions with the Fn Key
(page 33) for more information.
Why can't I view the whole screen image of a DVD video on my TV screen?
The screen resolution may not be properly set. It is recommended that you adjust the screen resolution to 1024 x 768 or
smaller, depending on the size of your external display screen.
How do I adjust the image on my TV screen?
Use the controls on your external display to adjust the image. See the manual that came with your TV for more information.
n 170 N
Troubleshooting
How do I change the screen resolution on my TV screen?
❑ Your TV screen may not show the whole screen image of a video if the screen resolution is set larger than 1024 x 768.
Adjust the screen resolution to 1024 x 768 or smaller.
❑ If you are using the AV Out jack, plug the audio-video (AV) cable into your computer before you start it.
❑ To change the video resolution, follow these steps:
1
Right-click the desktop, and select Properties from the shortcut menu.
2
Select the Settings tab.
3
Move the screen resolution slider to the left to reduce the size and to the right to increase the size of the screen
resolution.
How do I switch the display output from my computer screen to TV?
Press the Fn+F7 keys to view the image either on your computer screen or on your TV. See Combinations and Functions
with the Fn Key (page 33) for more information.
Why doesn't my computer screen display a video?
If the external display is selected for the display output with the Fn+F7 keys and the external display is disconnected, you
cannot display a video on your computer screen. Stop video playback, press the Fn+F7 keys to change the display output to
the computer screen, and then restart video playback.
What should I do if my computer screen is dark?
Press the Fn+F6 keys to brighten your computer screen.
n 171 N
Troubleshooting
What should I do if the LCD brightness of your computer screen changes?
The LCD brightness setting, adjusted with the Fn+F5/F6 keys, is temporary and this adjustment is overridden by the setting
on the VAIO Power Management tab when another power scheme is selected.
To save this preference for the brightness
✍
To do the following procedure, you must have administrator rights on your computer.
1
Click Start and then Control Panel.
2
Click Performance and Maintenance.
3
Click Power Options.
4
Select the tab for power scheme settings.
5
Select the desired power scheme from the drop-down list.
6
On the VAIO Power Management tab, select No change for LCD Brightness.
7
Click OK.
The preference for the LCD brightness adjusted with the Fn+F5/F6 keys is saved and the brightness of your computer screen
remains unchanged regardless of operating conditions.
n 172 N
Troubleshooting
Why does my external display (or TV) stay blank when I change the display output?
If you change the log-on user with the Fast User Switching function after Windows startup, you will not be able to select a
display by pressing the Fn+F7 keys.
What should I do if the Fn+F7 keys do not switch the display output to the external display
connected to the monitor (VGA) port on my computer?
When your computer is attached to the optional multi function bay docking station, the monitor (VGA) port on your computer
is disabled. Thus, pressing the Fn+F7 keys toggles between the computer screen and the external display connected to the
monitor (VGA) port on the docking station.
n 173 N
Troubleshooting
Printing
What should I do if I cannot print a document?
❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and computer.
❑ Make sure your printer is compatible with the Windows operating system installed on your computer.
❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer
for more information.
❑ If your printer is not functioning after your computer resumes from a power saving mode (Standby or Hibernate), then
restart the computer.
❑ If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may
enable printing. Follow these steps:
1
Click Start and then Control Panel.
2
Click Printers and Other Hardware.
3
Click Printers and Faxes.
4
Right-click the printer icon and select Properties.
5
Click the Ports tab.
6
Click to cancel the Enable bidirectional support check box.
7
Click OK.
This change to the settings disables the bidirectional communication functions of the printer, such as data transfer, status
monitoring, and remote panel.
When your printer is connected to the multi function bay docking station, check the multi function bay docking station to
see if it is connected to an AC power source.
n 174 N
Troubleshooting
Microphone
What should I do if my microphone does not work?
❑ If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the
microphone jack on your computer.
❑ The muting button may have been pressed. Check to see if the muting % indicator light is on. If it is, press the muting
button to turn on the volume.
n 175 N
Troubleshooting
Mouse
What should I do if my computer does not recognize my mouse?
❑ Make sure your mouse is securely plugged into the port.
❑ Restart your computer with your mouse connected.
What should I do if the pointer does not move when I use my mouse?
❑ Make sure another mouse is not installed.
❑ If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart your computer.
❑ If you still cannot use the pointer, do any of the following:
❑ Press the Ctrl+Alt+Delete keys simultaneously.
In the Windows Task Manager window, select Restart from the Shut Down menu to restart your computer.
❑ Press and hold the power button. When your computer turns off, wait 10 to 15 seconds then press the power button
again to restart the computer.
n 176 N
Troubleshooting
Speakers
What should I do if my speakers do not work?
❑ Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound.
❑ Make sure your speakers are designed for computer use.
❑ If your speakers have a muting button, set the button to off.
❑ The speaker volume may have been turned off. Press the muting button on your computer.
❑ If you have connected an audio cable to the headphones jack, disconnect the cable and use the speaker cable supplied
with your speakers.
❑ If you are using battery power, make sure the battery is installed properly and is charged.
❑ If your speakers require external power, make sure the speakers are connected to a power source. See the manual that
came with your speakers for more information.
What should I do if I cannot hear sound from my speakers?
❑ If your computer is using battery power, make sure the battery is properly installed and is charged.
❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the
program's help file for more information.
❑ Make sure the speaker volume is turned up loud enough and the audio option is enabled.
❑ The speaker volume may have been turned off. Press the muting button on your computer.
❑ Check the volume controls in Windows.
n 177 N
Troubleshooting
Touch Pad
What should I do if the touch pad does not work?
❑ Try restarting your computer.
Press the Ctrl+Alt+Delete keys simultaneously.
In the Windows Task Manager window, select Restart from the Shut Down menu to restart the computer.
❑ If the pointer does not move while playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and
restart your computer.
❑ If the problem persists, make sure a mouse is not installed.
❑ You may have disabled the touch pad without connecting a mouse to your computer. See Using the Touch Pad (page
35).
How do I change the left and right button assignments?
If your computer is interpreting a single-click as a double-click, you may want to change the button assignments. Follow these
steps:
1
Click Start and then Control Panel.
2
Click Printers and Other Hardware.
3
Click Mouse.
4
Click the Buttons tab.
5
Select your preferences in the Button Selection box, and then click Apply to install your settings.
You may need to press the Tab key and the M and m keys to make your selections.
6
Click OK to close the window.
n 178 N
Troubleshooting
Keyboard
What should I do if the keyboard configuration is wrong?
❑ The language layout of your computer's keyboard is specified on the sticker on the box. If you choose a different regional
keyboard when you complete the Windows setup, the key configuration will be mismatched.
❑ To change the keyboard configuration, follow these steps:
1
Click Start and then Control Panel
2
Click Date, Time, Language and Regional Options, and click Regional and Language Options.
3
Change the settings as desired.
What should I do if I cannot enter certain characters with the keyboard?
If you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated. Check that the Num lock indicator is
off. If the Num lock indicator is on, press the Num Lk key to turn it off before entering these characters.
n 179 N
Troubleshooting
Floppy Disks
Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is
connected?
Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB
port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does
not appear, follow these steps:
1
Close all programs that are accessing the floppy disk drive.
2
Wait for the LED indicator on the floppy disk drive to turn off.
3
Push the eject button to remove the disk, and disconnect the USB floppy disk drive from your computer.
4
Reconnect the floppy disk drive by inserting the USB connector (with the USB icon facing upward) into the USB port.
5
Restart the computer by clicking Start, Turn Off Computer, and then Restart.
What should I do if I cannot write data to a floppy disk?
❑ Make sure the floppy disk is properly inserted in the drive.
❑ If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can
either use a floppy disk that is not write-protected or disable the write-protect feature.
n 180 N
Troubleshooting
PC Cards
What should I do if my PC Card does not work?
❑ Make sure the PC Card is inserted properly. See Inserting a PC Card (page 47) for more information.
❑ Make sure the PC Card is compatible with the Microsoft Windows operating system installed on your computer.
❑ See the manual that came with your PC Card for more information. You may need to install driver software if you are not
using a Sony PC Card.
Why doesn't my computer recognize attached devices?
For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate modes while the card is
inserted into the PC Card slot, your computer may not recognize the PC Card or the connected device. Restart the computer.
Why can't I insert my PC Card?
❑ Make sure you are inserting the card correctly. See Inserting a PC Card (page 47) for more information.
❑ You may not be able to use some PC Cards or some functions of the PC Card on your computer. See the manual that
came with your PC Card for more information.
n 181 N
Troubleshooting
Audio/Video
What should I do if I cannot use my DV camcorder?
If the message that DV equipment seems to be disconnected or turned off appears, the i.LINK cable may not be securely
plugged into the ports on your computer or camcorder. Unplug the connectors, and plug them in again. See Connecting an
i.LINK Device (page 103) for more information.
✍
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on
the software applications, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each
other. See the manual that came with your compatible i.LINK device for more information on operating conditions and proper connection. Before
connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating system compatibility and
required operating conditions.
n 182 N
Troubleshooting
Memory Stick Media
What should I do if I cannot open my image files?
You may need to reformat your Memory Stick media.
Formatting Memory Stick media erases all data, including music data previously saved to it. Before you reformat Memory
Stick media, back up important data and confirm that the media does not contain files you want to keep.
1
Copy the data from the Memory Stick media onto your computer's hard disk to save data or images.
2
Format the Memory Stick media using the Memory Stick Formatter software preinstalled on your computer. For
instructions about formatting a Memory Stick media, see the help file on the Memory Stick Formatter software.
Why can't I save music files onto my Memory Stick media?
Copyright protected music cannot be checked out to any Memory Stick media other than MagicGate Memory Stick media.
!
Using recorded music requires permission of the copyright holders.
Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources.
Can I copy images from a digital camera using Memory Stick media?
Yes, and you can view video clips that you have recorded with Memory Stick media-compatible digital cameras.
n 183 N
Troubleshooting
Peripherals
What should I do if I cannot connect a USB device?
❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital
camera, check the battery is charged. If you are using a printer, check the power cable is connected properly to the AC
outlet.
❑ Try using a different USB port on your computer. The driver could be installed to the specific port you used the first time
you connected the device.
❑ See the manual that came with your USB device for more information. You may need to install software before you connect
the device.
❑ Try connecting a simple, low-powered device such as a mouse to test if the port is working at all.
❑ USB hubs may prevent a device from working because of the distribution of power. We recommend you connect the
device directly to your computer without a hub.
n 184 N
Troubleshooting
Multi Function Bay Docking Station
What should I do if I cannot use the devices connected to the multi function bay docking
station?
Make sure to use the AC adapter supplied with the multi function bay docking station to connect the docking station to a power
source. The multi function bay docking station does not work on the battery installed in your computer.
n 185 N
Support Options
Support Options
The section contains information on where to go for answers to questions about your computer.
Sony Support Information
See the following sources for answers in the sequence listed below.
See Documentation (page 8) for details on the printed and non-printed documentation supplied with your computer, as well
as further sources of reference.
❑ Go to the help files that accompany your software for instructions on using the software.
❑ Use the search functionality in Help and Support Center by pressing the Microsoft Windows key
and the F1 key.
❑ VAIO-Link web site: if you have any problem with the computer, you can access the VAIO-Link web site for
troubleshooting. Go to http://www.vaio-link.com.
❑ e- Support: This interactive part of our web site http://www.vaio-link.com allows you to get in contact with our dedicated
support team over the internet. Using a personalized account, you can log your technical queries with ease.
❑ VAIO-Link help lines: Before contacting VAIO-Link by telephone, try to solve the problem by reading the printed and nonprinted documentation.
❑ Visit the other Sony web sites:
❑ www.club-vaio.com if you want to know more about VAIO and become part of the growing VAIO community.
❑ www.sonystyle-europe.com for online purchases.
❑ www.sony.net for other Sony products.
✍
You need to set up an Internet connection before you can access the online features described here.
n 186 N
Support Options
e-Support
What is e-Support?
You have searched our user guides and web site (www.vaio-link.com) but have not found an answer to your question/issue?
e-Support is the ideal solution for you!
Our e-Support Web Portal is an interactive web site on which you can submit any technical query you may have regarding
your computer and receive answers from our dedicated support team.
Every submitted query will result in a unique 'case number' to ensure smooth communication between yourself and the eSupport Team.
Who can use e-Support?
All registered VAIO customers are entitled to unlimited access to the VAIO-Link e-Support Web Portal.
How can I access the e-Support portal?
When you register your computer, you will automatically receive an email with the link to the e-Support Web Portal, your
Customer ID and some basic explanation a few hours later.
All you need to do is activate your account by clicking on the provided link in the email.
You are now ready to create your first case!
You can access the e-Support Web Portal from any computer with an active Internet connection.
A complete help file is available on the e-Support Web Portal to help you use our e-Support Service.
Can I submit questions in my native language?
Since you are interacting with our e-Support Team through a portal, which connects you directly to our central database, eSupport will only accept and deal with queries submitted in English, French or German.
n 187 N
Support Options
Can I submit my questions at any time?
Yes, you can submit your questions 24/7, but please keep in mind that our e-Support Team can only treat your queries from
Monday till Friday between 8am and 6pm.
Is there a cost involved for using e-Support?
No, this is a complete free of charge service offered to all registered VAIO customers!
How do I know when the e-Support Team has handled my query/case?
As soon as your case has been dealt with by our e-Support Team, you will receive an email, notifying you that your case has
been updated.
n 188 N
Support Options
Trademarks
Sony, Battery Checker, Click to DVD, DVgate Plus, HotKey Utility, Memory Stick Formatter, Prepare your VAIO, SonicStage,
SonicStage Mastering Studio, VAIO Control Center, VAIO Edit Components, VAIO Media, VAIO Power Management, Image
Converter, My Club VAIO, VAIO Update, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of
Sony Corporation.
Intel, Pentium, and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation.
Microsoft, Internet Explorer, Windows Movie Maker, Windows Media Player, Windows XP Professional, Windows XP Home
Edition, Windows Media Center Edition, MS Works 8.0, Microsoft Office 2003 SBE (Try & Buy) and the Windows logo are
trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries.
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection.
Adobe, Adobe Acrobat Elements, Adobe Acrobat Professional, Adobe Reader, Adobe Premiere Elements and Adobe
Photoshop Elements are trademarks of Adobe Systems Incorporated.
Norton Internet Security 2005 AntiSpyware Edition, Norton Password Manager 2004 and Norton Ghost 10 (Try & Buy) are
trademarks or registered trademarks of Symantec Corporation.
Roxio DigitalMedia SE is a trademark of Sonic Solutions.
WinDVD for VAIO is a trademark of InterVideo, Inc.
Sun Java VM is a trademark of Sun Microsystems, Inc.
Google Toolbar, Google Desktop Search, Google Talk, Google Earth and Google Picasa are trademarks of Google.
Yahoo! Messenger is a trademark of Yahoo!.
Utimaco Privatedisk easy is a trademark of Utimaco Software.
WebEx is a trademark of WebEx.
My Club VAIO uses Macromedia Flash™ Player software by Macromedia, Inc., Copyright © 1995-2003 Macromedia, Inc. All
rights reserved. Macromedia and Flash are trademarks of Macromedia, Inc.
n 189 N
Support Options
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation
is under license. Other trademarks and trade names are those of their respective owners.
The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under
license. Other trademarks and trade names are those of their respective owners.
SD is a registered trademark of Toshiba Corporation.
MultiMediaCard™ is a trademark of MultiMediaCard Association.
xD-Picture Card™ is a trademark of Fuji Photo Film Co., Ltd.
All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or ®
marks are not specified.
Specifications are subject to change without notice. All other trademarks are trademarks of their respective owners.
Please see the online Specifications to see what software is available for your model.
n
© 2006 Sony Corporation