Download FREE FREE

PROMOTION VALID FROM
1ST JULY - 30TH SEPTEMBER 2011
1/2"Sq Drive Air Impact Wrench
Twin Hammer
2tonne High Lift
Low Entry Trolley Jack
•
•
•
•
• Working/Maximum Torque: 725/825lb.ft.
• Ultimate Torque: 1000lb.ft.
• Suitable for jobs that would normally
require a 3/4" impact wrench.
• Features twist control at back of tool for
simple choice of speed and direction.
• Composite casing with soft grip makes
the tool lighter, easier to handle and helps
reduce vibration and chill.
• Handle exhaust reduces noise level.
• Model No. SA6002
• List Price £229.95
OFFER PRICE
£269.95
£323.94
FREE
13pc 1/2"Sq Drive Impact
Socket Set - Metric
Save
30%
•
•
OFFER PRICE
£159.95
£191.94
•
•
Min./Max. Saddle Height:
80/795mm.
High-lift jack arm with incredible
low minimum access height of just
80mm.
Fitted with quick lift foot pedal
and dead man's control.
Heavy-duty long steel chassis with
wide wheelbase provides inherent
stability and easy access to
deep set jacking points.
Model No. 2200HL
List Price £439.95
exc VAT
inc VAT
6.5ltr Manual Vacuum Oil & Fluid Extractor
Model No. AK5613M
List Price £26.95
•
•
exc VAT
•
•
•
•
•
inc VAT
Solar Powered Welding Helmet Shade 9-13
iegen
tools
•
•
•
•
•
•
Save
39%
Adjustable Shade: 9-13 Lens.
Fully automatic switching from
light to dark on striking arc.
Complies with BS EN 379,
BS EN 175 and DIN standards.
Light to Dark Time: 0.1ms @ -5°C to +55°C.
Model No. S0825
List Price £179.95
Save
69%
Ideal for other liquids such as water and soluble oil.
To remove oil from a car engine, simply push the probe down
the dip-stick hole and pump the handle on the top of the unit.
Sets up a permanent fluid transfer while you do something else.
Avoids searching for drain plug keys and getting under the vehicle.
Ideal for mobile mechanics.
Model No. TP69
List Price £87.95
FREE
Oil Filter Wrench
Claw Type
63-103mm
Capacity
3/8" & 1/2"Sq Drive
•
•
Model No. AK642
List Price £13.95
OFFER PRICE
£54.95
£65.94
OFFER PRICE
exc VAT
inc VAT
Save
35%
£56.95
£68.34
exc VAT
inc VAT
2.5tonne Axle Stands
• Cast iron
support posts.
• Tough steel
plate welded
bases.
• Sold in
pairs.
35%
(VS2003
Illustrated)
36%
£29.95
£35.94
• Heavy-duty 10tonne
high lift axle stands.
• Sturdy welded
steel construction
for superior safety
and strength.
• Supplied with
captive pin
load support.
• Min./Max.
Height:
711/1194mm.
• Model No.
AS10H
• List Price
£379.95
or
Save up to
OFFER PRICE
Save
10tonne Heavy-Duty
High Lift Axle Stands
Ratchet Type
Axle Stands
• Min./Max.
Height:
345/505mm.
• 2.5tonne
Capacity
per stand,
5tonne per
pair.
• Full width
V-crutch for
safe
location of
load.
• Model No.
AS2500
• List Price
£45.95
Model No
Capacity
Each
Minimum
Height
Maximum
Height
List
Price
VS2003
3tonne
287mm
427mm
£33.95
£22.95
£27.54
exc VAT
VS2006
6tonne
390mm
600mm
£69.95
£44.95
£53.94
inc VAT
VS2012
12tonne
432mm
702mm
£179.95
£119.95
£143.94
Manual/Air Hydraulic
Bottle Jacks
(VS2006
Illustrated)
OFFER PRICE
exc VAT
inc VAT
OFFER PRICE
£269.95
£323.94
Save
29%
exc VAT
inc VAT
Telescopic Bottle Jacks
OR
• Quicker, easier
and safer to work
with than regular
air jacks.
• Side mounted
pump requires
100-145psi and
9.5cfm of air for
optimum
performance.
• Can be used
with pumping
handle or air
operated.
(AM15
Illustrated)
Save up to
38%
Min. Saddle Max. Saddle
Capacity
Height
Height
Piston
Stroke
Weight
List
Price
AM12
12tonne
226mm
451mm
150mm
12kg
£399.95
£249.95
£299.94
TSJ6
AM15
15tonne
228mm
453mm
150mm
14kg
£449.95
£299.95
£359.94
TSJ12
Model No
OFFER PRICE
exc VAT
inc VAT
• Telescopic
two-stage ram
gives a higher
maximum lift
than the standard
range.
• Compact closed
height.
• Cast base with
threaded
components
for easy
disassembly.
Mechanic’s Mat Sets
EVA
30%
Minimum
Height
Maximum
Height
Hydraulic
Lift
Screw
Extension
6tonne
212mm
550mm
263mm
12tonne
230mm
555mm
240mm
Model No Capacity
List
Price
OFFER PRICE
exc VAT
inc VAT
75mm
£99.95
£69.95
£83.94
85mm
£139.95
£99.95
£119.94
Composite Creeper with 6 Wheels
• Quality EVA mats ideal
for the busy mechanic.
• Set comprises full-length
and kneeler mats.
• For use on workshop
floors when working on
wheels, brakes, tyres
and exhausts, etc.
• Also ideal for roadside
repairs.
Model No
Save up to
Save up to
49%
OFFER PRICE
exc VAT
inc VAT
Kneeler Mat Size
Full-length Mat Size
List Price
VS857
385 x 280 x 22mm
890 x 390 x 22mm
£34.95
£17.95
£21.54
VS8571
450 x 215 x 28mm
980 x 380 x 28mm
£38.45
£19.95
£23.94
CAR2000
Car Ramps
• One piece, moulded
high impact polymer
creeper with two integral tool
trays and padded headrest.
• Low profile for greater under
vehicle clearance.
• Features six Ø75mm swivel
castors for easy
manoeuvrability.
• Model No. SCR80
• List Price £64.95
Save
38%
OFFER PRICE
£39.95
£47.94
(CAR1950 Illustrated)
2
inc VAT
Workshop Stools with Swivel Seat
NEW
NEW
• Length: 800mm
• Ramps coated with corrosion resistant finish.
• Ramps stack together and will stand upright
for easy storage.
exc VAT
Save up to
26%
• Four legged
heavy-duty steel
construction with
polished Chrome
plate finish.
• Two strengthening
rings for stability,
lower one also
acts as a foot rest.
• Ø350mm padded
swivel seat.
• SCR14 features
pneumatic height
adjustment
730 - 860mm.
Model No
Capacity
per Ramp
Capacity
per Pair
Maximum
Height
Maximum
Width
Maximum
Tyre Width
List
Price
CAR1950
1tonne
2tonne
250mm
245mm
175mm
£41.95
£32.95
£39.54
Model No
(SCR14
Illustrated)
(SCR13
Illustrated)
Save
30%
OFFER PRICE
exc VAT
inc VAT
Back Rest
Maximum
Height
Maximum
Load
Weight
List Price
OFFER PRICE
exc VAT
inc VAT
CAR2000
1tonne
2tonne
250mm
345mm
200mm
£59.95
£46.95
£56.34
SCR13
No
750mm
136kg
6kg
£63.95
£44.95
£53.94
CAR2500
1.25tonne
2.5tonne
250mm
270mm
200mm
£52.95
£38.95
£46.74
SCR14
Yes
860mm
136kg
5kg
£99.95
£69.95
£83.94
Prices exclude VAT unless stated otherwise
Promotion Code GWE11
3tonne Long Chassis
Trolley Jack
3tonne Professional
Trolley Jack
•
•
•
•
•
•
•
Min./Max. Saddle Height:
130/435mm.
Chassis Length: 625mm.
High capacity portable
garage jack for serious
hobby or recovery
vehicle use.
Heavy-duty one-piece
hydraulic unit with
overload protection.
•
•
•
•
3tonne Professional Trolley Jack
with Super Rocket Lift
•
•
•
Min./Max. Saddle Height: 145/490mm.
Chassis Length: 685mm.
Integral American cog-type release
mechanism with two-piece handle.
Heavy-duty swivel
castors and extra-large
saddle design ease
positioning under vehicle.
Fitted with safety
overload valve and
‘pump-through’ valve
to prevent handle
locking once at
maximum lift height.
Model No.
3000CXD
List Price
£174.95
•
•
•
•
•
•
Save
•
•
Model No. 1153CX
List Price £87.45
OFFER PRICE
•
•
•
•
£89.95
£107.94
exc VAT
inc VAT
1.5tonne Aluminium Trolley Jack
with Rocket Lift
•
49%
OFFER PRICE
£52.95
£63.54
•
Save
39%
Min./Max.
Saddle
Height:
85/445mm.
Chassis
Length:
625mm.
Made primarily
for the motor
racing enthusiast,
this jack weighs in
at just 20kg.
Rocket Lift with
twin piston design
enables saddle to
be brought up to
jacking point with
minimal pumps.
Model No.
RJA1500
List Price
£299.95
exc VAT
inc VAT
Min./Max. Saddle Height: 145/504mm.
Chassis Length: 690mm.
Super Rocket Lift feature brings lifting
arm straight into contact with jacking
point with a single pump of the handle.
Single piece hydraulic unit with
heavy base design.
Integral saddle pad provides
protection for the jacking point.
Integral American cog-type
release mechanism and
two-piece handle.
Heavy-duty castor wheels
and 55mm wide front
wheels for even load
distribution.
Model No. 3003CXQ
List Price
£219.95
FREE
Save
9" Desk Fan
2-Speed
Push-Button
230V
50%
OFFER PRICE
£109.95
£131.94
• Model No.
SDF9W
• List Price £25.95
Low Entry Trolley Jacks
High Lift Trolley Jacks
•
•
•
•
•
Heavy-duty chassis.
Profiled lifting arm allows low
clearance height making this
unit suitable for sports and
custom cars.
Fitted with heavy-duty
one-piece hydraulic
unit with pump-through
action preventing
handle locking at
maximum ram
extension.
Integral release
mechanism
prevents
inadvertent
lowering of
saddle.
•
•
•
(3001LE
Illustrated)
(2010HL Illustrated)
Save up to
44%
Save
37%
£189.95
£227.94
exc VAT
inc VAT
Heavy Lift Long Reach
Trolley Jacks
•
•
•
•
Min./Max.
Model No Capacity Saddle Height
•
•
•
•
•
•
Save up to
41%
5001
5tonne
150/570mm
List
Price
OFFER PRICE
exc VAT
inc VAT
£799.95
£469.95 £563.94
7001
7tonne
170/570mm
£939.95
10QJ
10tonne
170/570mm
£999.95
Promotion Code GWE11
OFFER PRICE
exc VAT inc VAT
46%
Min./Max.
Model No Capacity Saddle Height
£549.95 £659.94
£599.95 £719.94
•
•
List
Price
OFFER PRICE
exc VAT inc VAT
2500LE
2.5tonne
85/450mm
£179.95
£99.95 £119.94
1510HL
1.5tonne
98/800mm
£679.95
£369.95 £443.94
3001LE
3tonne
95/480mm
£229.95
£139.95 £167.94
2010HL
2tonne
98/735mm
£829.95
£459.95 £551.94
25tonne Air/Hydraulic Jack
•
•
(10QJ
Illustrated)
Min./Max.
Model No Capacity Saddle Height
List
Price
20tonne
Air Operated
Trolley Jack
Handle mounted safety release
prevents inadvertent lowering of
load.
Includes large diameter saddle for
easier positioning under the
jacking point.
Fitted with safety overload valve.
Fully CE approved for general
workshop applications.
inc VAT
Ideal for 4x4 vehicles or
vehicles with a high
ground clearance.
Great for estate cars
and vans.
Suitable for loading
bodyshop chassis jigs.
Danish design with
up to 3 years warranty
(registration required
for 2nd & 3rd year).
Save up to
OFFER PRICE
exc VAT
Min./Max. Height:
205/430mm.
Air Consumption:
9.5cfm.
Powerful and reliable.
Ideal for workshop or
roadside use.
Takes the effort out of
lifting heavy plant,
tractors and
commercial vehicles.
Supplied with 70mm x
20mm extension as
standard. For optional
extensions see main
catalogue or web.
Model No. YAJ20B
List Price £999.95
•
•
•
•
•
•
OFFER PRICE
£699.95
£839.94
Min./Max. Height:
215/423mm.
Powerful and
reliable, this jack is
ideal for workshop or
roadside use.
At modest cost, it
takes the effort out of
lifting heavy plant,
tractors and
commercial vehicles.
The jack features dead
man's controls and
multi-position locking
handle.
Supplied with one
spacer to close the
gap between the
saddle of the jack and
the jacking point.
Made in the EU.
Model No. MAJ25
List Price £1699.95
OFFER PRICE
exc VAT
inc VAT
Save
30%
Prices exclude VAT unless stated otherwise
£999.95 exc VAT
£1199.94 inc VAT
Save
41%
3
Engine Support Beams
Double Support Engine Support Beam
500kg Capacity
or
(ES300 Illustrated)
•
•
•
Designed to support and accurately position engines during maintenance operations.
Ideal for supporting the engine whilst replacing anti-vibration mountings
and certain body panels.
Save up to
40%
Aids with the removal of gearboxes and transmissions.
Capacity
Min./Max. Width
Screw Travel
List Price
ES300
300kg
660/1420mm
210mm
£89.95
£59.95
£71.94
ES500
500kg
1020/1600mm
350mm
£117.45
£69.95
£83.94
•
•
•
•
•
•
•
•
•
•
•
OFFER PRICE
exc VAT
inc VAT
Model No
Engine Stand 550kg Capacity
•
•
•
500kg Capacity.
Designed to support and accurately position engines during maintenance operations.
Ideal for supporting the engine whilst replacing anti-vibration mountings and certain
body panels.
Aids with the removal of gearboxes and transmissions.
OFFER PRICE
Supplied with two short lengths of chain.
exc VAT
Model No. ES502
List Price £127.45
Save
37%
Folding Engine Stand 900kg Capacity
•
550kg Capacity.
Accepts wide variety of
engines and transmissions.
Head swivels through 360°.
Swivel castors for easy
manoeuvrability.
Fully adjustable mounting
arms.
Model No. ES550
List Price £107.45
•
•
•
•
•
Head swivels 360° for
accessibility to all parts of
the engine.
Fully adjustable mounting
arms.
Swivel castors provide
excellent manoeuvrability.
Features foldable legs for
easier storage and
transportation.
Model No. ES900F
List Price £199.95
•
•
•
•
Save
40%
exc VAT
Save
inc VAT
30%
Vertical Transmission Jacks
•
•
•
•
£139.95
£167.94
Rocket Lift feature to
reduce the time and
effort needed to raise
arms to contact point.
Steel construction with friction
mounted roller arms.
Adjustable width, 300 or
360mm between rollers,
gives greater flexibility.
Supplied with safety bar
to prevent wheel from
tipping forward.
Model No. WD80
List Price £399.95
OFFER PRICE
OFFER PRICE
£63.95
£76.74
£259.95
£311.94
exc VAT
inc VAT
exc VAT
inc VAT
Save
35%
Workshop Headlamp
Beam Setter
Features high speed lift to
gearbox - just lift piston.
Foot pedal operation keeps
hands free.
Features dead man's handle
for added safety and strong
construction for durability.
Highly manoeuvrable on
castor wheels.
•
•
(600TR Illustrated)
•
•
FREE
•
•
•
Adjustable Gearbox Support
500kg Capacity with every
Transmission Jack
28%
38%
Capacity
Min./Max. Saddle Height
Base Size
List Price
300TR
300kg
1120/1940mm
560 x 570mm
£319.95
£199.95
£239.94
600TR
600kg
1175/1985mm
560 x 570mm
£369.95
£229.95
£275.94
1tonne Folding Engine Crane Quick Lift
•
•
•
•
•
•
•
•
OFFER PRICE
OFFER PRICE
exc VAT
inc VAT
Model No
Suitable for pre-MOT inspection in garages
and bodyshops.
Utilises same optical box and aiming
screen as fitted to our MOT approved
headlamp beam setter.
Fixed aiming screen. Internal analogue
LUX meter for accurate light intensity
measurement.
Suitable for all types of cars and light
commercial vehicles.
Fitted with fixed column and rubber wheels.
Model No. HBS2001
List Price £719.95
Save
Save
• Model No. ADT3
• List Price £129.95
£519.95
£623.94
exc VAT
inc VAT
Jacking Beams with 1.6mtr Extending Arms
& Flat Roller Supports
Fast folding for easy
storage and transportation.
Heavy-duty castors. Pump
access from side.
Quick lift feature brings unladen jib to full
elevation with nineteen strokes of the
handle.
5 Jib lengths - lifts 600kg at maximum
extension of 1020mm.
Designed for heavy professional use and
fitted with dead man's control.
Base has four wheels for greater
manoeuvrability when folded.
Model No. WF10Q
List Price £599.95
Save
•
•
•
•
•
•
•
Fully certified and
approved to comply
with VOSA
requirements.
1.6mtr Load arm reach.
Two-stage mechanical safety
lock and telescopic finger guards.
Spring loaded flat arms with
roller bearings.
Optional hook arms supplied.
Supplied with two pairs of
aluminium support blocks.
Wide lift configuration meets VOSA
recommendation for lifting on jacking point.
(SJBEX300 Illustrated)
33%
OFFER PRICE
£399.95
£479.94
4
inc VAT
80kg Wheel Removal-Lifter
Trolley with Rocket Lift
•
•
OFFER PRICE
£79.95
£95.94
Save up to
48%
Model No
Capacity
exc VAT
Support Arm
Reach
SJBEX200
2tonne
780-1075mm
95-300mm
£949.95
£519.95
£623.94
inc VAT
SJBEX300
3tonne
780-1075mm
95-300mm
£1299.95
£679.95
£815.94
Prices exclude VAT unless stated otherwise
Beam Lift
List Price
OFFER PRICE
exc VAT
inc VAT
Promotion Code GWE11
Motorcycle
Wheel
Balancer
Motorcycle Wheel Chocks
Motorcycle Coil Spring
Compressor
• Black powder coated heavy-duty tubular frame.
• Pre-drilled holes allow chock to be bolted to either
floor or trailer to prevent movement while being
worked on or transported.
• Professional
motorcycle
wheel balancer.
• Suitable for
most
motorcycle
wheels.
• Includes two
cones and
spindle for
precise, easy
alignment and balancing.
• Uses gravity to find the
heavy point of a wheel
and tyre.
• Model No. VS1819
• List Price £149.95
(WC07
Illustrated)
• Essential for
the assembly and disassembly of suspension units.
• Suitable for most types of classic and modern
motorcycle coil springs.
• Supplied with four spare plastic spring protectors in
metal storage case.
• Use with ratchet wrench.
• Model No. VS1824
• List Price £59.95
Save
47%
£34.95
£41.94
exc VAT
inc VAT
£14.95
£10.95
£13.14
WC07
140mm
£16.95
£11.95
£14.34
inc VAT
WC08
165mm
£18.95
£12.95
£15.54
• Manufactured from
strong durable yet
lightweight aluminium.
• Folded Dimensions
(L x W x H): 934 x 296 x 154mm.
• Extended Dimensions
(L x W x H): 1828 x 296 x 72mm.
• Suitable for loading/unloading motorbikes
or wheel barrows from vans or trailers.
• Features hooks at one end to help secure
ramp while in use.
• Folding design for compact storage.
• Model No. MR200
• List Price £125.95
OFFER PRICE
• Ideal for use with
off-road/trials bikes. Easily
lifts the bike when performing
maintenance/services or cleaning.
• Simple, one foot, step and lift mechanism means
the bike can be instantly raised in one motion.
• Min./Max. Height: 275/380mm.
• Model No. MPS1
• List Price £74.95
OFFER PRICE
exc VAT
Save
inc VAT
27%
OFFER PRICE
exc VAT
inc VAT
Motorcycle Ramp 200kg Capacity
£54.95
£65.94
Motorcycle Lift 365kg Capacity
exc VAT
inc VAT
Save
37%
£79.95
£95.94
exc VAT
inc VAT
Motorcycle Lift 450kg Capacity
• Min./Max. Height: 220/760mm.
• Working Table Size: 480 x 2215mm.
• All steel construction with foot operated, integral hydraulic pump
and ram assembly.
• Fitted with safety lock device to fix platform at three working heights of
760mm, 640mm and 500mm and to prevent accidental lowering.
• Suitable only for motorcycles with a centre stand.
• Support platform fitted with full width loading ramp.
OFFER PRICE
• Base assembly fitted with transport wheels and
lock-downs to prevent lift from moving during use.
• Model No. MC365
• List Price £449.95
£299.95
£359.94
Promotion Code GWE11
95mm
exc VAT
Quick Lift Stand
for Trials Bikes
150kg Capacity
OFFER PRICE
25%
WC06
Model No
• Supplied with a range of pins to fit the most common
headstock sizes.
• Makes access to all front mechanical components easy.
• Stand folds down for compact storage when not in use.
• Supplied with width and angle adjustable rubber support
pads to quickly and easily use as rear support stand.
• Pin Sizes: 12, 15, 16, 18, 20, 24mm.
• Model No. FPS5
• List Price £99.95
Save
Maximum Width:
List
Price
OFFER PRICE
Front Headstock Stand
£74.95
£89.94
32%
42%
OFFER PRICE
£79.95
£95.94
Save up to
Save
•
•
•
•
Save
33%
exc VAT
•
•
•
•
•
Min./Max. Height: 150/600mm.
Working Table Size: 500 x 1820mm.
Steel construction heavy-duty hydraulic pump and ram assembly.
Fitted with platform safety locking device with four height settings of 600mm,
530mm, 440mm and 320mm to prevent accidental lowering.
Supplied with full width loading ramp and adjustable front wheel clamp.
Base frame fitted with transport wheels and lock-down
bolts to prevent lift from moving during use.
Only suitable for motorcycles with a centre stand.
OFFER PRICE
Model No. MC455
List Price £499.95
inc VAT
Prices exclude VAT unless stated otherwise
£329.95
£395.94
Save
34%
exc VAT
inc VAT
5
Exhaust Fume
Extractor with
6mtr Hose
Oil Filter Crushing Unit
• Excellent as
a back-up
machine
for garages
with
purpose-built
fume extraction units.
• Complies with the
latest EMC regulations and is powerful yet quiet.
• Suitable for cars and small commercials up to 10tonne
GVW.
• Fitted with exhaust pipe cone that includes a port to allow
use with gas analyser probes.
• Supplied with 6mtr flexible
ducting.
OFFER PRICE
• Model No. EFS/93
• List Price
exc VAT
£1445.95
Save
38%
£899.95
£1079.94 inc VAT
• Crushing filters minimizes
the cost of disposal of
hazardous waste by
volume.
• Air operated oil filter crusher.
• Safety lock-out device prevents the
door being opened during operation.
• Floor mounting unit with outlet
for waste oil transfer.
• Air Supply: 100-190psi.
• Internal Dimensions (H x W x D):
280 x 190 x 190mm.
• Model No. HFC08
• List Price £799.95
• Used in conjunction
with a press, this unit crushes filters up to Ø115mm.
• Ram extension allows two-stage crushing of large filters
without repositioning press table.
• Suitable for Ø38mm(1.5") press rams. Optional
adaptors enable use with Ø50mm and
Save
Ø60mm rams.
38%
• Crushing filters minimizes
the cost of disposal of
OFFER PRICE
hazardous waste by
volume.
exc VAT
• Model No. OFC1
• List Price £119.95
inc VAT
Save
30%
OFFER PRICE
£559.95
£671.94
£74.95
£89.94
Transmission
& Engine
Oil Filling
System
90ltr Stainless Steel
Fuel Tank Drainer
• Stainless steel fuel
drainer with venturi
type suction.
• 90ltr Capacity tank
suitable for petrol
or diesel.
• Supplied with suction
tubes and adaptors
for breaking into
vehicle fuel system.
• CE Certified (971231EC).
• Model No. TP201
• List Price £1649.95
•
•
•
•
•
Save
OFFER PRICE
• Model No. AK659
• List Price £19.95
• For use in conjunction with Sealey
Transmission Oil Filling System (Model No.
VS7009).
• Set contains automatic transmission oil
adaptors suitable
for Audi, Mercedes and VW vehicles.
• Model No. VS70090
• List Price £54.95
Save
27%
OFFER PRICE
Save
26%
£169.95
£203.94
Coil Spring Compressor
Kit 2250kg Capacity
Coil Spring Compressing
Station Hydraulic
1500kg Capacity
OFFER PRICE
£39.95
£47.94
exc VAT
inc VAT
FREE
1/2"Sq Drive
Generation
Series Air
Impact Wrench
3pc 1/2"Sq Drive
12-Point Impact
Hub Nut Socket Set
Save
• Model No. SX051
• List Price £49.95
33%
OFFER PRICE
£199.95
£239.94
• Model No. GSA01
• List Price £99.95
Save
34%
OFFER PRICE
exc VAT
inc VAT
inc VAT
• Use in conjunction with GA42 Gauge Set for accurate
castor and kingpin alignment.
• Also measures toe-in/out and full lock angles.
• Locking pins prevent rotation of table whilst driving vehicle
on and ensure accurate angular measurements.
• Measures up to 45º rotation in either direction.
• Maximum loading 1360kg per pair.
• Model No. GA44
• List Price £319.95
FREE
FREE
exc VAT
Steering Turntables - Pair
• 2250kg Maximum jaw
loading.
• Supplied with 2 pairs of
drop-forged yokes.
• Safety yokes carefully
shaped to prevent coil
spring from bowing.
• Suitable for use with air
wrenches.
• Wide availability of
standard and optional
yokes.
• Model No. RE225
• List Price £529.95
• 1500kg Capacity
foot-operated
hydraulic unit.
• Quicker and easier than
using ratchet driven
spring compressor.
• Plastic coated yokes
reduce the risk of
spring slippage/damage.
• Suitable for springs
from Ø102mm to
Ø160mm.
• Model No. RE231
• List Price £299.95
inc VAT
Delivers approximately 70ml per stroke.
Large visual measurement will identify amount dispensed.
Supplied with a range of five automatic transmission fluid adaptors.
Model No. VS7009
List Price £229.95
6pc Double
End Drain
Key Set
£1149.95 exc VAT
£1379.94 inc VAT
exc VAT
3pc Transmission Oil Adaptor Kit
FREE
30%
6
Pneumatic Oil Filter
Crusher
£349.95
£419.94
Save
31%
OFFER PRICE
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
£219.95
£263.94
exc VAT
inc VAT
Magnetic
Camber/Castor
Gauge
• Model No. GA45
• List Price £49.95
Promotion Code GWE11
Manual Bead Breaker
Tyre Changer & Spreader
Combination
Hydraulic Bead Breaker
• Hydraulic action, suitable
for breaking beads on
commercial and
agricultural tyres.
• Use in conjunction
with hydraulic pump and
hose (not included).
• Model No. TC966
• List Price £299.95
• Wheel mounting manual bead breaker.
• Suitable for workshop, roadside or agricultural
use on wheels up to 420mm.
• Use with ratchet wrench or spanner.
• Model No. TC9660
• List Price £59.95
•
•
•
•
•
•
•
•
•
Steel construction with manual bead breaker.
Working Ø Minimum/Maximum: 325/460mm.
Wheel Depth Minimum/Maximum: 40/203mm.
Supplied with tyre bar.
To prevent damage to the rims of the alloy
wheel, it is essential to use a TC963 Tyre Bar.
Model No. TC960 •
List Price £109.95
Designed for use with Model No. TC960
or similar tyre changer with Ø50mm post.
Easily fits to top of tyre changer and permits
the easy inspection and repair of tyre damage.
Model No. TC969 •
List Price £49.95
BUNDLE DEAL
•
FREE
FREE
Pump Assembly
Save
33%
Hose Assembly
• Model No. RE97.10-01
• Model No. RE97.10-03
• List Price £78.95
• List Price £26.95
OFFER PRICE
£39.95
£47.94
•
OFFER PRICE
OFFER PRICE
exc VAT
Save
inc VAT
Manual Wheel
Balancer
23%
£229.95
£275.94
exc VAT
inc VAT
Laser Wheel Alignment Gauge
• Optical system uses low radiation laser beam to
indicate toe-in or toe-out.
• Single leg configuration and reversible contact probes
allow on-ramp use.
• Works on practically all cars and light commercials
with rim diameters from 200 to 600mm.
• Powered by 2 x AA cells and includes operating
instructions.
• Model No. GA50
OFFER PRICE
• List Price £699.95
OFFER PRICE
41%
£99.95
£119.94
exc VAT
Save
inc VAT
43%
Wheel Removal Trolley
Adjustable Width 500kg Capacity
FREE
OFFER PRICE
1000mm 3/4"Sq Drive
Breaker Bar
Promotion Code GWE11
exc VAT
inc VAT
Wheel Removal Trolley
1200kg Capacity
• Suitable for changing wheels and tyres on
the very largest vehicles.
• Min./Max. Lifting Height: 50/640mm.
• 8 Position adjustable roller width ranging
from 440 to 780mm.
• Load arms incorporate smooth roller action
sleeves allowing wheel to be rotated for
lining up on studs.
• Foot operated hydraulic mechanism with
dead man's control release.
• Mounted on two castors and two fixed wheels
for stability and easy manoeuvrability.
• Supplied with safety chain.
• Model No. W508T
• List Price £749.95
• Model No. AK7312
• List Price £94.95
£399.95
£479.94
Save
33%
£499.95
£599.94
exc VAT
inc VAT
Save
24%
£83.95
£100.74
exc VAT
inc VAT
18V 1/2"Sq Drive Cordless Lithium-ion
Impact Wrench 300lb.ft with 1hr
Mains Charger & Battery
• Suitable for
balancing all types of
wheels with hubs
from Ø115mm.
• Simple to use and
requires no power.
• Model No. GA10
• List Price £169.95
Save
Order Model No.
TCCOMBO1
Total List Price £159.90
• Min./max. wheel diameter:
1000/2200mm.
• Eight adjustable rollers
(4 each side) allow for
easy turning of large
deep tread tyres.
• Extra large jacking handle
and hydraulic foot pedal
allows for one man
operation.
• Safety bar with composite
guard goes around wheel
to ensure stability during
transportation.
• Locking mechanism
allows rollers to be fixed
at eight preset positions.
• Mounted on two locking
and two non-locking
swivel castors for
improved stability and
easy manoeuvrability.
• Ideal for use on
agricultural and
commercial wheels
and tyres.
• Overall size (W x D x H):
1300 x 1015 x 1500mm.
• Model No. W1200T
• List Price £999.95
Prices exclude VAT unless stated otherwise
• Produces torque in excess
of 407Nm (300lb.ft) - enough
to remove wheel nuts.
• Forward, reverse and
trigger lock control.
• Powered by
lithium-ion battery,
which maintains a
high energy density
level with a flat
discharge curve - performing
better and longer than a
conventional Ni-CD/Ni-MH battery.
• No memory effect allows the
battery to recover from
a deep discharge with
OFFER PRICE
no tendency to reduce
overall capacity.
• Model No.
CP50COMBO1
• List Price £282.85
£199.95
£239.94
Save
29%
exc VAT
inc VAT
NEW
OFFER PRICE
Save
30%
£699.95
£839.94
exc VAT
inc VAT
7
36 LED Cordless Rechargeable
Inspection Lamp
21+5 LED Cordless Lithium-ion Rechargeable
Inspection Lamps
5 Super Bright LEDs
can be used as a
directional torch
Why Lithium-ion over Ni-MH?
Lithium-ion polymer battery (3.7V/1200mAh) for
longer life, no memory effect, a much slower
discharge than typical Ni-MH batteries and can
operate for up to four hours on a single charge.
Two 360° swivel hooks for
hands free operation
allowing unit to be used
horizontally or vertically.
21 Super
Bright LEDs
• Robust heavy-duty
housing, with rubber
grip, incorporating 36
super bright LEDs.
• Ball joint gripper for easy positioning.
• Ideal for use in engine bays,
under body inspections and
low-light work areas.
• Supplied with mains charger
and LED charging indicator.
• Model No. LED36
Save
• List Price £79.95
Replaceable
shatterproof
lens
Bottom quarter of
lamp rotates 180°
Save up to
38%
53%
OFFER PRICE
£49.95
£59.94
Colour
Operating
Time
LED2105
Black
4hr
4hr
255mm
£74.95
£34.95
£41.94
LED2105F
Hi-Vis
4hr
4hr
255mm
£79.95
£39.95
£47.94
Model No
exc VAT
inc VAT
Three rubber
covered magnets
for ease of use
on any ferrous
surface.
Charging
Length List Price
Time
50mm Water Pump
5.5hp Petrol Engine
1000W Generator Inverter
230V
• Economically designed petrol powered water
pump with recoil starting.
• Suitable for on site applications where mains
power supply is not available.
• Featuring 50mm inlet/outlet with 26mtr
pumping head offering a high flow rate up to
600ltr/min of water.
OFFER PRICE
• Protected by frame from
accidental damage.
• Model No. EWP050
• List Price £349.95
• Digital inverter technology provides stable 'clean' output
making the unit suitable for use with sensitive electrical
equipment such as computers.
• Smart throttle sensor adjusts engine speed to
match load, giving better fuel efficiency
Save
and engine life.
33%
• Three-pin socket and 12V
battery charging outlet.
OFFER PRICE
• Low oil cut-out and
overload protection.
exc VAT
• Model No. G1000E
• List Price £639.95
inc VAT
£219.95
£263.94
Save
37%
exc VAT
inc VAT
OFFER PRICE
exc VAT
inc VAT
Hi-Vis Model
Model No. LED2105F
2300W Generator 230V
• Heavy-duty frame design provides full protection and
portability.
• Suitable for running power tools and lighting units etc.
• Up to 10.5 hours on a full tank.
• Two 230V 3-pin sockets.
• Powerful and reliable generator fitted with
Save
maintenance-free brushless alternator.
36%
• Smooth running unit fitted with anti-vibration
mountings.
OFFER PRICE
• Low oil cut-out feature
and fuel gauge.
exc VAT
• Model No. G2300
• List Price £499.95
inc VAT
£429.95
£515.94
£319.95
£383.94
Generators
(GG1100 Illustrated)
• Heavy-duty industrial
frame design provides
full protection and portability.
• Suitable for running power tools and lighting units etc.
• Fitted with 12V battery charging outlet.
• Powerful and reliable generators fitted with maintenance-free
brushless alternators.
• Volt meter fitted to ensure constant power output.
• Smooth running unit fitted with anti-vibration mountings.
8
(GG2800 Illustrated)
(GG7500 Illustrated)
Save up to
40%
Model No
Motor
Power
Continuous
Power Rating
Maximum
Power Rating
Fuel Tank
Capacity
Maximum
Noise Rating
Running Time
LwA
Dry
Weight
Dimensions
(L x W x H)
List
Price
Motor Type
Output
Current Rating
GG1100
2.4hp
4-Stroke Petrol
230V - 50Hz/12V DC
4A/8.3A
900W
1100W
6ltr
6hr
GG2800
6.5hp
4-Stroke Petrol
230V/110V - 50Hz/12V 10.4A/21.8A/8.3A
2400W
2800W
15ltr
10hr
GG3800
9hp
4-Stroke Petrol
230V/110V - 50Hz/12V
14A/29A/8.3A
3200W
3800W
25ltr
GG7500
13hp
4-Stroke Petrol
230V/110V - 50Hz/12V
22A/45A/8.3A
5000W
6000W
25ltr
90dB
25kg
479 x 377 x 434mm
£419.95
£249.95
£299.94
90dB
46.5kg
623 x 480 x 538mm
£649.95
£399.95
£479.94
12hr
94dB
82kg
713 x 541 x 569mm
£969.95
£649.95
£779.94
10hr
96dB
85kg
713 x 541 x 569mm
£1099.95
£719.95
£863.94
Prices exclude VAT unless stated otherwise
OFFER PRICE
exc VAT
inc VAT
Promotion Code GWE11
12V RoadStart® Emergency Power Pack
with Compressor 900 Peak Amps
• Cable and Clamp Length: 0.78mtr.
• LED battery condition, polarity check
and charge indicators.
• Integral air compressor with pressure gauge
for accurately topping/pumping up tyres.
• Fitted with 12Volt power socket.
• Supplied with mains
OFFER PRICE
charger, DC charger
and double plug adaptor
for in-car charging.
• Model No. RS132
• List Price £159.95
Save
47%
£84.95
£101.94
exc VAT
inc VAT
12V RoadStart® Emergency Power Pack
1000 Peak Amps
12V/24V RoadStart® Emergency Power
Pack 3000 Peak Amps
• Cable and Clamp Length: 0.5mtr.
• Delivers up to 1000 Peak Amps of initial starting power.
• Starts up to 30 cars before recharging, depending on the
length of crank time needed to start each one.
• Monitor power pack condition using TEST function.
• Display via 5 LED indicators.
Save
• Use as a 12V power supply too
43%
- includes a lighter type socket.
• Supplied with mains
OFFER PRICE
charger and double plug
adaptor for in-car
exc VAT
charging.
• Model No. RS1
inc VAT
• List Price £229.95
• Cable and
Clamp Length: 1mtr.
• Easy-to-read, colour
coded analogue gauge
measures battery condition and charge indicator.
• Test cycle button gives true battery indication.
• 230Volt Charger with automatic power cut-off prevents
damage to battery whilst charging from the mains.
• Power socket that will accept any 12V device
Save
39%
with a cigarette lighter type plug.
• Supplied with mains
charger and double plug OFFER PRICE
adaptor for in-car
exc VAT
charging.
• Model No. RS125
inc VAT
• List Price £379.95
£129.95
£155.94
(AUTOCHARGE6
Illustrated)
Electronic Battery Chargers 230V
£229.95
£275.94
14Amp 12/24V Battery Charger
230V
(AUTOCHARGE4 Illustrated)
• Compact electronic battery charger with pressed steel casing and carry
handle (carry handle not featured on Model No. AUTOCHARGE4).
• Can be connected to a battery for an indefinite period - the intelligent
circuitry constantly monitoring the voltage and maintaining the charge
level at optimum.
• Intelligent charge control is perfect for long-term maintenance of
batteries on irregularly or seasonally-used vehicles.
• Suitable for lead acid or low maintenance batteries.
• Reverse polarity protection prevents inadvertent damage to charger.
• LED display confirms charger status.
• Analogue ammeter shows charging current (not featured on Model No.
AUTOCHARGE4).
(AUTOCHARGE12
Illustrated)
Save up to
38%
Amps
Output
Output Current
Peak(EN)
Input
Battery
Range
AUTOCHARGE4
4Amp
12V
4A(2.6A)
230V 50Hz 58W
8-40Ah
£31.95
£19.95
£23.94
AUTOCHARGE6
6Amp
12V
6A(2/4.3A)
230V 50Hz 80W
10-60Ah
£44.95
£27.95
£33.54
AUTOCHARGE12
12Amp
6V/12V
12A(2/8A)
230V 50Hz 170W
20-120Ah
£59.95
£39.95
£47.94
Model No
Starter/Chargers 230V
List Price
OFFER PRICE
exc VAT
inc VAT
•
•
•
•
•
14Amp, 12/24Volt output.
Dash mounted fuse provides polarity protection.
Fitted with ammeter.
Professional charger in heavy-duty metal case.
Save
Supplied with 1400mm output cables with
41%
heavy-duty crocodile clips.
• Made in the EU.
OFFER PRICE
• Model No.
SUPERCHARGE15/1
exc VAT
• List Price £144.95
£84.95
£101.94
inc VAT
12/24V Starter/Chargers
230V
(SUPERBOOST140
Illustrated)
• Easy-to-read ammeter and
illuminated power switch.
• Made in Europe to EU
Standard Cenelec EN
60335.
• Polarity protected.
Model No
Power
Output
SUPERBOOST140
12V
Save up to
(SUPERBOOST200 Illustrated)
Max. Charge
Max. Start
List
Price
42%
OFFER PRICE
exc VAT
inc VAT
• Fused polarity protection.
• EU Cenelec specification EN 60335.
• Heavy-duty transformer, flush mounted ammeter and variable
charge rate controls.
• Fast-charge timer (not featured on Model No. SUPERSTART320).
Model No
Max. Start/Charge
Input
(charge)
Input
(start)
List
Price
Save up to
41%
OFFER PRICE
exc VAT
inc VAT
21Amps (14Amps EN) 140Amps (80Amps EN) £224.95
£129.95
£155.94
SUPERSTART320
300Amps/45Amps
3.8/7.5Amps
22Amps
£499.95
£299.95
£359.94
SUPERBOOST200 12V/24V 45Amps (30Amps EN) 200Amps (180Amps EN) £339.95
£199.95
£239.94
SUPERSTART520
450Amps/75Amps
6/12Amps
30Amps
£639.95
£379.95
£455.94
Promotion Code GWE11
Prices exclude VAT unless stated otherwise
9
Spot Welders
with Timer
Plasma Inverters 230V
•
•
•
•
•
IP23 Rated
Supplied with plasma torch and earth cable.
Inverter power supply fitted with plasma cutter control circuitry.
Utilises contact start torch - suitable for use near electrical equipment.
PP25PLUS features an integral compressor - no more trailing hoses
or bottled air, just plug into a power supply and push the trigger.
• Ideal for cutting steel, stainless, galvanized steel, aluminium,
copper and brass.
• Semi-automatic spot welder.
• Supplied with 120mm welding arms,
(SR1
electrodes and side handle.
23 Illu
strate
• SR122 features Integral synchronous timer enabling
d)
adjustable spot time of between 0.1 and 1.2 seconds.
• SR123 features pulse mode for use on high stress steels commonly found
in modern vehicle construction.
• All automatically selected parameters may be overridden by the operator if required.
• Integral electronic control allows operator to select thickness of material
Save up to
while automatically calculating the optimum weld duration.
38%
Max. Absorbed
Power
Mains
Fuse
Max.Welding
Current
Weight
List Price
OFFER PRICE
exc VAT
inc VAT
SR122
1 + 1mm
6kW
16A
3800A
10.5kg
£799.95
£499.95 £599.94
SR123
2 + 2mm
13kW
25A
6300A
11kg
£999.95
£629.95 £755.94
OFFER PRICE
exc VAT
inc VAT
5-25A
55-70psi
6.2kg
8mm
100ltr/min
£1099.95
£699.95
PP25PLUS
5-23A
n/a
12.5kg
6mm
Integral
Compressor
£1399.95
£899.95 £1079.94
PP35
7-40A
58-72psi
7.7kg
12mm
100ltr/min
£1399.95
£899.95 £1079.94
(MWE130C Illustrated)
• Compact lightweight
units are suitable for
arc welding using
scratch-start
method.
• Automatic Arc-Force
circuitry makes the
units suitable for arc
welding a wide
variety of rods
including rutile,
basic and stainless.
• Also includes
thermal cut-out and
mains voltage LEDs.
• Fitted with Hot-Start
system to counter
electrode sticking
during scratch starting.
Max. Cutting
Air
List Price
Thickness Requirements
PP25
(MWE80C Illustrated)
230V Inverters with
Accessory Kit
Weight
£839.94
(MWE160C Illustrated)
Model No Capacity
Power
Air
Output Pressure
Model No
Save
36%
Save up to
41%
Model No
Peak
Power
Operating
Duty Cycle
Power Output
MWE80C
80A
10-80A
30% @ 80A
Ø1.6-2.5mm
2.5kW
230V - 1ph
B
IP21
3.5kg
Yes
£249.95
£149.95 £179.94
MWE130C
130A
10-130A
40% @ 120A
Ø1.6-4.0mm
4.0kW
230V - 1ph
B
IP21
5kg
Yes
£339.95
£199.95 £239.94
MWE160C
160A
10-160A
30% @ 160A
Ø1.6-5.0mm
5.2kW
230V - 1ph
B
IP21
5kg
Yes
£399.95
£249.95 £299.94
Model No
180XTD
210XTD
Save up to
36%
10
Insulation
Protection
Class
Weight
Accessories
List Price
Included
OFFER PRICE
exc VAT
inc VAT
(WITH ALL THREE OF THESE WELDERS)
2.0 x 300mm
Welding
Electrodes
5.0kg Pack
• Model No.
WE5020
• List Price
£26.95
Mains
Voltage
(260XTD Illustrated)
• Forced air cooling
system for high duty
cycle.
• Supplied with a full
accessory kit including
electrode holder and
earth clamp.
• Ideal for the
professional fabricator
or the agricultural user.
• Heavy-duty
performance.
FREE
Absorbed
Power
(180XTD Illustrated)
Arc Welders with
Accessory Kit
Electrode
Capacity
(210XTD Illustrated)
Supplied
with arc
welding
accessory
kit.
260XTD
Welding Current
Electrode
Capacity
Cooling
Output Cable
No-Load
Voltage
35-180A
Ø2.0-4.0mm
Forced Air
16mm²
48V
Ø2.0-5.0mm
Forced Air
25mm²
48V
Ø2.0-5.0mm
Forced Air
25mm²
48V
35-210A(230V),
80-210A(415V)
35-210A(230V),
80-260A(415V)
Prices exclude VAT unless stated otherwise
Power Input
Absorbed
Power
Weight
List Price
OFFER PRICE
exc VAT
inc VAT
230V - 1ph
5.0kW
24kg
£319.95
£209.95 £251.94
6.0kW
39kg
£429.95
£279.95 £335.94
6.0kW
39kg
£469.95
£299.95 £359.94
230V - 1ph,
415V - 3ph
230V - 1ph,
415V - 3ph
Promotion Code GWE11
FREE
(S0863 Illustrated)
(S0771 Illustrated)
• Features heavy-duty high
output transformer and
forced-air cooling to
ensure the highest
level of performance.
• Contoured grip, non-live
torch ensures a steadier
weld bead.
• Suitable for welding
with CO2, Argon or
CO2/Argon mix.
• Model No. S0771
• List Price £359.95
Mild Steel MIG Welding Wire - 5KG 0.6mm
with S0816 & S0863 • Model No. MIG/777706
• List Price £37.95
Siegen Welders
(S0816 Illustrated)
Siegen
MIG Welders
Trolley
FREE Universal
with S0771
• Model No. BTR4
• List Price £84.95
Model No Max. Current
List Price
OFFER PRICE
exc VAT
inc VAT
S0771
130Amp
£359.95
£199.95
£239.94
S0816
150Amp
£449.95
£249.95
£299.94
S0863
180Amp
£699.95
£379.95
£455.94
• Model No. S0771 includes hand-held mask, mini
gas regulator, spool of wire, contact tips 0.6
and 0.8mm and gas cup.
• Model No’s. S0816 and S0863 include industrial
gas regulator, contact tips 0.6, 0.8mm and gas cup.
• Heavy-duty high output transformer
and forced air cooling to maximize
duty cycle performance.
• Supplied with a high quality BINZEL®
Euro torch, 2mtr earth cable, 1.4mtr of
gas hose, twin gauged gas regulator,
1kg spool of 0.6mm wire, 0.6 and
0.8mm tips.
• Set up in the gas welding mode but
can also easily be switched to gasless.
(MIGHTYMIG190 Illustrated)
Professional Gas/No-Gas
MIG Welders with Euro Torch
Forced
Air Cooling
System
Model No. MIGHTYMIG170
46%
Accepts
Industrial
Size Bottles
Model No. MIGHTYMIG210
Save up to
BINZEL®
Euro Torch
FREE
Solar Powered Welding
Helmet Shade 9-13
2mtr
Earth Cable
• Model No. S0825
• List Price
£179.95
Save up to
46%
250Amp Professional
Gas/No-Gas MIG Welder
with Euro Torch
Solar Powered Welding
Helmet Shade 9-13
• Model No. S0825
• List Price£179.95
Promotion Code GWE11
Max. Current
List Price
MIGHTYMIG170
170Amp
£739.95
£429.95
£515.94
MIGHTYMIG190
190Amp
£849.95
£459.95
£551.94
MIGHTYMIG210
210Amp
£949.95
£519.95
£623.94
270Amp Professional MIG
Welder with Euro Torch
• 270Amp Maximum performance.
• Forced Air Cooling System allows
high duty cycle.
• Professional contour grip, quick
release Euro non-live torch.
• Fitted with spot weld timer.
• Supplied with industrial
CO2/Argon regulator.
• Ideal for the
professional.
• Welds stainless
and aluminium too.
• Model No.
SUPERMIG270
• List Price
£1699.95
• Heavy-duty high output transformer
and forced air cooling to maximize
duty cycle performance.
• 250Amp Maximum current.
• Supplied with a high quality
BINZEL® MB25AK Euro torch, 3mtr
earth cable, 1.4mtr of gas hose,
twin gauged gas regulator, 1kg
spool of 0.8mm wire, 0.8 and
1.0mm tips.
• Set up in the gas welding mode but
can also easily be switched to
gasless.
• Can be used with large, industrial
CO2 gas bottles.
• Model No. MIGHTYMIG250
• List Price £1499.95
FREE
OFFER PRICE
exc VAT
inc VAT
Model No
Save
40%
OFFER PRICE
£899.95 exc VAT
£1079.94 inc VAT
Prices exclude VAT unless stated otherwise
FREE
Solar Powered Welding
Helmet Shade 9-13
• Model No. S0825
• List Price£179.95
Save
41%
OFFER PRICE
£999.95 exc VAT
£1199.94 inc VAT
11
Workshop Parts Cleaning Tank with
Turbo Feature
(AK2501 Illustrated)
Degreasing
Solvents
• Degreasing solvent
suitable for use in
cleaning tanks.
• Use in Sealey and
other leading
makes of parts
cleaning tank.
Save up to
40%
List Price
OFFER PRICE
exc VAT
inc VAT
Model No
Size
AK2001
20ltr
£99.95
£59.95
£71.94
AK2501
25ltr
£123.95
£79.95
£95.94
(AK25 Illustrated)
Emulsifiable
Degreasing
Solvents
• Contains emulsifiers
which enable it to
form an emulsion
with water, aiding
cleaning of solvent
from workpiece.
• Also suitable for engine
cleaning.
Save up to
38%
List Price
• One-piece tank
construction with
triple baked enamel
finish and fitted
with fully sealed,
magnetic drive
pump unit.
• Pump unit with
replaceable impellor.
• Fluid recirculated
through replaceable
filter element and
directed onto workpiece
through flexible metal
delivery nozzle.
• Turbo feature agitates
degreaser to help
remove stubborn grease.
• Lid of tank fitted with
fusible link hinge which
automatically snaps
lid shut in the event
of a fire.
• Supplied with removable
shelf, parts basket and
workshop stand with
integral storage shelf.
• Model No. SM20
• List Price
£199.95
Save
35%
Bench/Portable Parts Cleaning Tank
• Suitable for
bench
mounting or
portable use.
• One-piece
tank with triple
baked finish
and fully sealed
magnetic drive
pump unit with
replaceable
impellor.
• Fitted with flexible,
metal delivery
nozzle.
• Tank includes removable shelf.
• Model No. SM21
OFFER PRICE
• List Price £84.95
£57.95
£69.54
Save
32%
exc VAT
inc VAT
OFFER PRICE
£129.95
£155.94
exc VAT
Extra Deep Parts Cleaning Tank
inc VAT
OFFER PRICE
exc VAT
inc VAT
Model No
Size
AK20
20ltr
£119.95
£74.95
£89.94
AK25
25ltr
£144.95
£94.95
£113.94
Parts
Cleaning
Tank
Mobile Parts Cleaning Tank
• Heavy-duty
three tier
parts washer
with one-piece
tank, draining
board and
bucket.
• Fully
sealed
electric
motor.
• Lid features
self-latching
fusible link
which
automatically
snaps lid
shut in the
event of a fire.
• Includes
removable
shelf
inside tank.
• Model No.
SM26
• List Price
£289.95
exc VAT
• One-piece
tank
construction
with triple
baked
enamel
finish and
fitted with
fully sealed,
magnetic
drive pump
unit.
• Fluid recirculated
through replaceable filter element and directed onto
workpiece through flexible metal delivery nozzle.
• Extra large capacity tank suitable for cleaning larger
engine components.
Save
• Lid of tank fitted with fusible link hinge which
34%
automatically snaps lid shut in the event of fire.
• Supplied with removable
OFFER PRICE
shelf and parts basket.
• Model No. SM40
exc VAT
• List Price £399.95
inc VAT
inc VAT
OFFER PRICE
Save
38%
£179.95
£215.94
50ltr Mobile Parts
Cleaning Tank
with 65ltr Reservoir
£264.95
£317.94
12
exc VAT
Save
34%
or
• Heavy-duty steel one-piece
tank.
• Fitted with fully sealed and
air operated pump unit.
• Large capacity tank is suitable
for cleaning larger engine
components.
• Includes air blow gun for
fast drying of workpiece.
• Lid of tank fitted with fusible
link hinge which automatically
snaps lid shut in the event
of a fire.
• Supplied with removable
shelf and parts basket.
OFFER PRICE
inc VAT
£274.95
£329.94
Air Operated
Parts Cleaning Tanks
• Steel fabricated 65ltr reservoir
and 50ltr one-piece tank.
• Mobile unit which can easily
be taken to work area.
• Air operated unit can be
charged and then used without
air supply for a limited period.
• Includes brush for cleaning workpiece
and air blow gun for fast drying.
• Reservoir fitted with fluid level
indicator and drain tap.
• Supplied with removable shelf and tray.
• Lid automatically snaps shut in
the event of a fire.
• Model No. SM224
• List Price £579.95
£379.95
£455.94
• One-piece
heavy-duty steel
tank.
• Extra deep tank is suitable for soaking and cleaning
awkwardly shaped components.
• Fitted with fully sealed, magnetic drive pump
Save
unit.
36%
• Lid of tank fitted with fusible link hinge which
automatically snaps lid
shut in the event of a fire. OFFER PRICE
• Supplied with removable
exc VAT
shelf and parts basket.
• Model No. SM40D
inc VAT
• List Price £429.95
Save up to
38%
Prices exclude VAT unless stated otherwise
(SM223 Illustrated)
OFFER PRICE
exc VAT
inc VAT
Model No
Capacity
List Price
SM221
70ltr
£439.95
£274.95
£329.94
SM223
85ltr
£469.95
£299.95
£359.94
Promotion Code GWE11
•
•
•
Sandblasting Gun with 6mm Nozzle
Beads suitable for use in
shot blasting cabinets.
Size: 180-200microns.
Model No. B5KG
Save
30%
List Price £39.95
•
•
OFFER PRICE
£27.95
£33.54
exc VAT
inc VAT
25kg Bag Shot Blasting Grit
•
•
•
This grit is suitable for both workshop,
hand-held and recirculating shot blasters.
Comply with COSHH SI-1657-1988. Not
suitable for use in shot blasting cabinets.
• Model No. B/25KG
• List Price £17.95
OFFER PRICE
Save
Shot
Blasting
Kits
• Compact and
portable.
• Large capacity
hopper with handle
and heavy-duty
rubber wheels
for easy
manoeuvrability.
• Supplied with 3mtr
grit hose, fitted with
a heavy-duty shot
blasting gun and
four ceramic
nozzles.
£24.95
£29.94
inc VAT
List Price
OFFER PRICE
exc VAT
inc VAT
Model No
Capacity
SB994
22.6kg
£99.95
£69.95
£83.94
SB995
40kg
£149.95
£114.95
£137.94
Save up to
30%
exc VAT
•
•
inc VAT
Save
43%
exc VAT
inc VAT
OFFER PRICE
exc VAT
inc VAT
Model No
Capacity
List Price
SB997
37ltr
£199.95
£144.95
£173.94
SB998
75ltr
£269.95
£179.95
£215.94
• Bench-top mounting
cabinet with gun.
• Ideal for professional
use.
• Designed for use with
glass beading or plastic
granular mediums.
• Delivered assembled
and ready for use.
• Overall Size (W x D x H):
640 x 490 x 490mm.
• Model No. SB951
• List Price £219.95
• Heavy-duty steel cabinet
with integral low voltage
illumination.
• Two large side doors
provide easy access for
bulkier items and includes
Ø34mm dust extraction
port for a clear view.
• Overall Size (W x D x H):
690 x 575 x 620mm.
• Supplied with sand blasting
gun with 3 spare ceramic
nozzles and heavy gauntlets.
• Model No. SB970
• List Price £379.95
Save up to
33%
OFFER PRICE
exc VAT
inc VAT
Save
34%
Shot Blasting Cabinet
with Gun
760 x 510 x 710mm
£229.95
£275.94
exc VAT
inc VAT
• Heavy-duty steel cabinet,
toughened glass viewing
screen and integral low
voltage illumination.
Both models feature
• Overall Size (W x D x H):
integral low voltage
SB973; 890 x 570 x 1380mm, lighting and are
SB974; 960 x 720 x 1500mm. supplied with a
• Supplied with sand blasting
sand blasting gun.
gun, four ceramic nozzles
SB974 is equipped
and visor covers.
with two doors to
• Suitable for glass beads,
give easier access
silica sand, aluminium
for bulkier items.
oxide and other proprietary
brands of blasting media.
• Dust Extraction Port:
SB973; Ø60mm, SB974; Ø64mm.
OFFER PRICE
Model No Air Pressure
exc VAT
inc VAT
Promotion Code GWE11
Save
39%
Free Standing Shot
Blasting Cabinets
• Steel cabinet with
replaceable viewing
screen and internal
illumination.
• Fitted with shot blasting
gun and suitable for
proprietary brands of
glass beads, silicon
carbide, aluminium oxide
and silica sand only.
• Overall Size (W x D x H):
760 x 510 x 710mm.
• Model No. SB972
• List Price £429.95
£274.95
£329.94
£22.95
£27.54
• Pressured tank for
maximum power.
• Supplied with 2.4mtr rubber
hose, four ceramic nozzles
and in-line water trap for
moisture-free grit blasting.
• Also includes bayonet air
line coupling and air flow
regulator.
• Accepts a variety of grits
up to 80microns and is
suitable for stripping rust
and paint from wheels,
chassis, panels and other
corroded/painted surfaces.
Shot Blasting Cabinet
Double Access
690 x 575 x 620mm
£144.95
£173.94
Suitable for use
in the bodyshop.
Feathering action makes it
ideal for treating stone chips.
Supplied with a set of
OFFER PRICE
four rubber nozzles
and a 700g bottle of
blasting grit.
Model No. SG10E
List Price £39.95
Shot Blaster with Water
Trap & Wheels
Shot Blasting Cabinet
with Gun
640 x 490 x 490mm
OFFER PRICE
•
•
OFFER PRICE
exc VAT
Air Recirculating Economy
Sand Blasting Kit
•
38%
(SB994 Illustrated)
22%
£13.95
£16.74
Save
(SB995 Illustrated)
•
Suitable for
cleaning small
areas such as
wheels or chassis
members.
Accepts a variety
of abrasives
including sand,
chilled iron grit
and other
proprietary types
of bead.
Model No. SSG8
List Price £39.95
(SB998 Illustrated)
•
(SB997 Illustrated)
5kg Tub Shot Blasting Beads - Glass
Save
36%
List Price
SB973
90psi
£569.95
£299.95
£359.94
SB974
60-100psi
£729.95
£569.95
£683.94
Prices exclude VAT unless stated otherwise
(SB974 Illustrated)
OFFER PRICE
exc VAT
inc VAT
Save up to
47%
13
Arbor
Presses
Economy Floor Type
Hydraulic Presses
(PK2000
Illustrated)
NEW
• Economy range
suitable for the serious
enthusiast or
occasional
professional use.
• Made from a high
quality steel with a
powder coated paint
finish to help corrosion
resistance.
• Cast body and steel frame with machined
steel toothed arbor.
• Four position table with varying sizes of
cut-outs for pressing operations.
• Suitable for repetitive manufacturing
operations.
Model No Capacity
Throat
Depth
List Price
(YK10ECF
Illustrated)
(YK20ECF
Illustrated)
NEW
Save up to
Save
43%
OFFER PRICE
exc VAT
inc VAT
33%
Model No Capacity
Ram
Stroke
Table
Aperture
Working
Working
Table Depth Table Width
Max. Height
Ram to Table
Min. Height
Ram to Table
Overall
Height
List
Price
OFFER PRICE
exc VAT inc VAT
PK2000
2000kg
150mm
£219.95
£129.95
£155.94
YK10ECF
10tonne
138mm
82mm
165mm
418mm
435mm
70mm
1305mm £299.95
£199.95 £239.94
PK3000
3000kg
178mm
£369.95
£209.95
£251.94
YK20ECF
20tonne
136mm
94mm
200mm
500mm
655mm
52mm
1562mm £449.95
£299.95 £359.94
10tonne Floor Type
Hydraulic Press
• Table Aperture:
83mm.
• Working Table
Width: 416mm.
• Overall Height:
1514mm.
• Detachable pump
and ram allowing
hydraulics to be
used for other
purposes when
press is not in use.
• Supplied with
gauge.
• Model No. YK10F
• List Price £469.95
OFFER PRICE
£299.95
£359.94
Save
36%
20tonne Floor Type
Hydraulic Press
30tonne Floor Type
Hydraulic Press
• Table Aperture:
105mm.
• Working Table
Width: 550mm.
• Overall Height:
1810mm.
• Detachable pump
and ram allowing
hydraulics to be
used for other
purposes when
press is not in use.
• Supplied with
gauge.
• Model No. YK20F
• List Price £669.95
• Table Aperture: 164mm.
• Working Table Width:
550mm.
• Ram Stroke: 150mm.
• Steel frame
construction.
• 2-Speed hydraulic
pump unit.
• Sliding hydraulic ram
assembly giving 195mm
of lateral travel for
off-centre pressing
applications.
• Fitted with ram
pressure gauge.
• Supplied with flat
pressing plate/V-blocks.
• Model No. YK30F
• List Price £999.95
exc VAT
inc VAT
Save
40%
OFFER PRICE
£399.95
£479.94
exc VAT
inc VAT
Save
35%
10tonne Bench Type
Hydraulic Press
15tonne Floor Type
Hydraulic Press
30tonne Floor Type
Hydraulic Press
• Table Aperture:
140mm.
• Working Table
Width: 500mm.
• Ram Stroke:
135mm.
• Hydraulics with
internal return
springs built into
the head of the
press to provide
greater
unimpeded
access to
working area.
• Supplied with pair of
V-blocks/pressing
plates.
• Model No.
YK10BM
• List Price
Save
£669.95
40%
• Table Aperture: 140mm.
• Working Table Width:
500mm.
• Ram Stroke: 150mm.
• Heavy-duty
construction.
• One-piece hydraulic
unit and external
return springs.
• Pressure gauge
included.
• Supplied with pair of
V-blocks/pressing
plates and seven pins
ranging from 3 to
20tonne which are
stored on table
mounted tool shelf.
• Model No. YK15
• List Price
£899.95
Save
• Table Aperture: 170mm.
• Working Table Width:
550mm.
• Ram Stroke: 150mm.
• Heavy-duty
construction.
• One-piece hydraulic
unit and external
return springs.
• Pressure gauge
included.
• Supplied with pair of
V-blocks/pressing
plates and seven
pressing pins ranging
from 3 to 20tonne which
are stored on table
mounted tool shelf.
• Model No. YK30
• List Price
Save
£1249.95
14
OFFER PRICE
£399.95
£479.94
exc VAT
inc VAT
41%
OFFER PRICE
£529.95
£635.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
44%
OFFER PRICE
£649.95
£779.94
exc VAT
inc VAT
OFFER PRICE
£699.95
£839.94
exc VAT
inc VAT
Promotion Code GWE11
All Steel Vices
Heavy-Duty Bench
Grinders
Cobalt Drill Bit Sets
Metric
(BG200/99
Illustrated)
OR
(ASV100 Illustrated)
• Bench mounting, heavy-duty steel vice
suitable for workshop, garage and
machine-shop use.
• Fixed base model with anvil, mounts
directly onto workbench.
• 5 Year guarantee against breakage.
List Price
Model No. BG150XD/99
• High power and high duty cycle induction motor suitable
for constant professional use.
• Fitted with stone guards, adjustable eyeshields and spark
arrestors.
Save up to
47%
OFFER PRICE
exc VAT
inc VAT
Model No
Jaw Size
ASV100
100mm
£97.45
£57.95
£69.54
ASV125
125mm
£119.95
£69.95
£83.94
(AK4701 Illustrated)
Model No. BG200/99
• High power induction motor suitable for workshop use.
• High duty cycle performance is particularly recommended
for frequent use applications.
Save
• Equipped with fully CE approved safety
30%
guards and wheel location flanges.
ASV150
150mm
£159.95
£84.95
£101.94
Model No
Motor
Stone
Size
ASV200
200mm
£199.95
£109.95
£131.94
BG150XD/99
450W
Ø150mm
ASV250
250mm
£239.95
£139.95
£167.94
BG200/99
600W
Ø200mm £149.95
12-Speed Floor
Pillar Drill
• High speed steel with
5% Cobalt makes
these ideal for drilling
extra hard materials.
• Split tip enables bits
to bite workpiece
quickly reducing the
need for centre mark.
• Supplied in metal
storage case.
• Drills can be
re-sharpened
without affecting
their performance.
List
Price
£89.95
OFFER PRICE
exc VAT
inc VAT
Save up to
42%
OFFER PRICE
exc VAT
inc VAT
Model No
Pcs/Sizes
List Price
£75.54
AK4701
19pc/1-10mm
£59.95
£34.95
£41.94
£104.95 £125.94
AK4702
25pc/1-13mm
£99.95
£59.95
£71.94
£62.95
16-Speed Premier
Bench Pillar Drill
12-Speed Premier
Floor Pillar Drill
• 16mm (5/8") Capacity
chuck, MT2.
• Fitted with no-load voltage
switch and locking cover to
prevent accidental starting.
• Integral work light
• Height: 1050mm.
• Motor with aluminium
housing for cool running.
• Chuck to Upright: 190mm.
• Motor Power: 370Watt, Input
Power: 550Watt.
• Column Diameter: 80mm.
• Spindle Travel: 80mm.
• Weight: 62kg.
• Model No. PDM155B
• List Price £529.95
• 20mm (3/4") Capacity chuck, MT4.
• Fitted with no-load voltage switch
and locking cover to prevent
accidental starting.
• Integral work light.
• Height: 1710mm.
• Chuck to Upright: 260mm.
• Weight: 125kg.
• Motor with aluminium
housing for cool running.
• Motor Power: 750Watt,
Input Power: 925Watt.
• Column Diameter: 92mm.
• Spindle Travel: 120mm.
• Model No. PDM260F
• List Price
Save
£1079.95
See page 15 of our
Summer Promotion for
a comprehensive
range of Pillar Drills.
• 16mm (5/8") Capacity chuck, MT2.
• Fitted with no-load voltage switch
and locking cover to prevent
accidental starting.
• Height: 1530mm.
• Chuck to Upright: 127mm.
• Motor Power: 220Watt, Input
Power: 370Watt.
• Column Diameter: 60mm.
• Spindle Travel: 60mm.
• Weight: 53kg.
• Model No. GDM140F
• List Price £349.95
Save
43%
OFFER PRICE
£199.95
£239.94
40%
OFFER PRICE
exc VAT
inc VAT
Mini Drilling & Milling Machine
£299.95
£359.94
OFFER PRICE
exc VAT
inc VAT
Save
43%
£649.95
£779.94
exc VAT
inc VAT
355mm Portable Abrasive Disc Cut-Off Saw
• Bench mounting machine
with the flexibility to handle
most materials.
• Features include a 350Watt
motor, variable speed drive,
working table with T-slots to
enable clamping of workpieces
and Metric graduated
compound scales.
• Incorporates a tilting column
which allows drilling/milling of
workpiece at ±45° from vertical.
• Supplied with 13mm chuck and
accessory kit for adjusting
and setting.
• Complies with Safety of
Machinery (Safety) Regulations
1992 (and amendments) and
is fully CE approved.
• An optional stand is available,
order Model No. SM3002ST.
• Model No. SM2502
• List Price £949.95
• General purpose abrasive saw
suitable for site use.
• Supplied with abrasive disc
suitable for metal-cutting but
will cut concrete with correct
blade fitted.
• Trigger operated, 2200W motor
and hardened gears give
smooth transmission of power.
• Model No. MG314/230V
• List Price £239.95
Save
Save
33%
33%
OFFER PRICE
£639.95
£767.94
OFFER PRICE
£159.95
£191.94
exc VAT
inc VAT
Promotion Code GWE11
Prices exclude VAT unless stated otherwise
exc VAT
inc VAT
15
Metal Working Lathe 300mm Between Centres
Metal Working Lathe 500mm Between Centres
• Ideal for
the small
workshop,
professional
or home
engineer.
• Powered by
a 300Watt
motor this
compact unit
features variable speed reversible drive and powered
cutting facility for right and left hand threads.
• Supplied with self centring 3 jaw chuck, 4-way tool post,
swarf tray and rear splash guard.
• Optional stand is available, order Model No. SM3002ST.
• Complies with Machinery Directive 98/37/EEC is fully CE
approved and supplied with emergency stop
button and chuck guard.
Save
• Model No. SM3002
24%
• List Price £849.95
• Features power
feed for even
surface finish
and thread
cutting.
• Four-way tool
post mounted
on compound
slide
mechanism
enables fast
interchange of
cutting tools
with accurate feed.
• Incorporates quiet running PTO
gearbox with oil bath lubrication for power feed.
• Powered by 550Watt motor through six-speed gearbox.
• Fitted with no-load voltage release switch.
• Fully guarded to CE safety of machinery regulations
98/37/EEC and covered by EMC directive 89/336/EEC
and Low Voltage directive 79/23/EEC.
• Workshop stand available as an optional extra.
Save
• Model No. SM27
33%
• List Price £1499.95
OFFER PRICE
£649.95
£779.94
exc VAT
inc VAT
OFFER PRICE
£999.95 exc VAT
£1199.94 inc VAT
Power Belt Sander
100 x 1220mm
150mm 3-Speed Metal
Cutting Bandsaw
• Heavy cast base with adjustable
sanding table.
• Fitted with magnetic no-volt release
switch to prevent accidental starting
after belt jam.
• Quiet and powerful 750W/230V motor.
• Suitable for metal and fabrication
workshops.
• Floor stand is an optional extra.
• Model No. SM100
• List Price £659.95
• 3-Speed settings.
• Heavy-duty cast base and cutting
arm.
• Oil bath gear box and life
lubricated bearings for quiet,
smooth operation.
• Full guarded blade and magnetic
no-load voltage switch.
• Complies with CE directive
98/37/EEC.
• Model No. SM5
• List Price £399.95
Save
Save
39%
30%
OFFER PRICE
£399.95
£479.94
OFFER PRICE
£279.95
£335.94
exc VAT
inc VAT
150mm 3-Speed Metal
Cutting Bandsaw with Mitre,
Quick Lock Vice & Stand
• Fully CE approved.
• Heavy-duty power bandsaw with
hydraulic cutting arm control for a
smooth cut.
• Maximum Capacity: 70mm at 60°,
120mm at 45° and 210mm at 0°.
• 750W/230V Motor.
• Saw arm fitted with hydraulic
damping to prevent the arm being
dropped onto the workpiece and
to ensure smooth cutting
performance.
• Bow swivels up to 60° angle
allowing workpiece to always sit in
a central position.
• Model No. SM354CE
Save
• List Price £2095.95
38%
OFFER PRICE
OFFER PRICE
Save
300mm Horizontal Hydraulic Arm Bandsaw
OFFER PRICE
16
£1299.95 exc VAT
£1559.94 inc VAT
exc VAT
inc VAT
400mm Horizontal Hydraulic Arm Bandsaw
• Precision machined cast-iron
saw bed.
• Hydraulic feed saw arm
gives greater cutting control
allowing clean results.
• 24Volt system for
coolant pump and
motor controls
gives added
safety to operator.
• Over-current sensor
on motor cuts power
in the event of blade jam.
• All blade and pulley covers
protected by safety switches.
• Model No. SM353CE
• List Price £3999.95
• Fully CE approved.
• Hydraulic cutting arm
control for a smooth cut.
• 300mm Capacity at 90°
and 170mm at 45°.
• 550W/230V Motor.
• Fully guarded safety switch.
• Saw arm fitted with hydraulic
damping to prevent the arm
being dropped onto the
workpiece and to ensure
smooth cutting performance.
• Model No. SM35CE
• List Price £1349.95
£899.95 exc VAT
£1079.94 inc VAT
£329.95
£395.94
inc VAT
210mm Industrial Power Bandsaw
• Swivel cutting arm saves space when
cutting angled work.
• Professional type quick-grip vice
included as standard - put the work on
the vice, push the jaw up to the
workpiece, then pull the cam action
lever to lock.
• Bench-top mounting on anti-vibration
feet and oil bath gearbox for smooth
running and long life.
• Roller bearing blade guides for
precision cutting.
• Model No. SM65
• List Price £499.95
34%
exc VAT
OFFER PRICE
Save
33%
£2499.95 exc VAT
£2999.94 inc VAT
Prices exclude VAT unless stated otherwise
Save
38%
Promotion Code GWE11
254mm Table Saw with Stand
& Extension Tables
406mm Throat Variable Speed
Scroll Saw
• Large die
cast
aluminium
table.
• Adjustable
blade
height and
tilt, up to
45°.
• Includes
quick lock rip-fence,
mitre gauge, dust
extraction port, push
stick and metal stand.
• Powered by 230V 1500W motor.
• Model No. TS10SEW
• List Price £229.95
• Fully CE approved
scroll saw with quality
rounded table.
• Features parallel arm
design and quick blade
changing system.
• Variable speed
operation to cut multiple
types of materials.
• Fitted with adjustable
safety guard and flexible
dust blower.
• Model No. SM1302
• List Price £139.95
Save
35%
OFFER PRICE
£149.95
£179.94
exc VAT
inc VAT
Save
OFFER PRICE
£99.95
£119.94
Variable Speed Mini Wood Lathe 330mm Centres
£139.95
£167.94
exc VAT
inc VAT
(SM46
Illustrated)
• Mobile
workshop
extractors
suitable for
attachment
to most
static
workshop
machines
including
bandsaws,
table saws,
scroll saws,
planers and
sanders.
• Supplied
with 2mtr of
Ø100mm
suction
ducting.
exc VAT
Save
30%
4-Speed
Wood Lathe
1000mm
Centres
Save
OFFER PRICE
£129.95
£155.94
exc VAT
inc VAT
Save up to
Promotion Code GWE11
Intake Ø
SM46
600cfm
225mm
100mm
746W
£289.95
£189.95
£227.94
SM47
700cfm
250mm
125mm
1490W
£399.95
£279.95
£335.94
Save
33%
Model No
Throat
Depth
SM1303
SM1304
List Price
OFFER PRICE
exc VAT
inc VAT
Vertical Type Hydraulic Log Splitter
8tonne 575mm Capacity
• Bearing mounted blade
wheels and direct drive
induction motor provide
smooth operation.
• Ø60mm Dust extraction
port.
• Supplied with rip
fence, mitre gauge
and push stick.
• Table Size:
300 x 300mm (SM1303)
or 340 x 335mm
(SM1304).
• Cutting Speed:
900mtr/min (SM1303) or
730mtr/min (SM1304).
• Motor Power: 250W
(SM1303) or 370W
(SM1304).
• Table Tilt: 0-45°
(SM1303) or 0-50°
(SM1304).
• Blade Size:
1400 x 6.5 x 0.35mm (SM1303) or
1712 x 10 x 0.35mm (SM1304).
exc VAT
inc VAT
Airflow
Motor
Power
or
OFFER PRICE
£499.95
£599.94
Model No
Impeller
Size
Professional Bandsaws
• Heavy-duty mortising
machine suitable for
cutting mortises up
to 1" for joints and
also for locks and
dead bolts.
• NVR Switch to
prevent accidental
restart.
• Vertical, horizontal
assembly and
clamping system for
complete positioning
and repetitive work.
• Supplied with 16mm
drill chuck, mortising
chisel, bit, chuck key
and hex keys.
• Model No. SM96
• List Price £749.95
inc VAT
34%
Maximum Turning Capacity: 1000 x 350mm.
Powered by smooth operating 370Watt motor.
Lathe bed with twin bar construction.
Solid head and tail stocks.
Model No. SM1308
List Price £189.95
1" Hollow Chisel
Mortiser with
Stand
exc VAT
(SM47
Illustrated)
32%
•
•
•
•
•
•
Save
36%
Dust & Chip
Extractors
OFFER PRICE
inc VAT
• Belt can be used horizontally, vertically or
any angle in-between.
• Sanding disc table tilts to 45° and is
supplied with mitre gauge.
• Powerful induction motor.
• Model No. SM14
OFFER PRICE
• List Price £219.95
29%
• Maximum Turning Capacity: 330 x 200mm.
• Cast iron construction throughout
with one-piece bed.
• Supplied with face plate, head and
tailstock and 2 tool rests.
• Smooth operating 250Watt motor.
• Ideal for bench mounting.
• Model No. SM1307
• List Price £199.95
£139.95
£167.94
Benchtop Belt/Disc Sander
• Safe and easy way to split logs,
offering continuous sizing and up
to 8tonne of pressure.
• Seven tier wedge system allows
workpiece to be as near to wedge
as possible, therefore minimizing
splitting time.
• Operated by foot pump requiring
a maximum of 15 strokes to
capacity (without load) for easy
and fast splitting.
• Tier Log Lengths: 300, 350, 400,
450, 500, 550, 600mm.
• Maximum Load Pressure:
8tonne.
• Overall Size (W x D x H):
285 x 540 x 1040mm.
• Model No. LS575VH
• List Price £179.95
Save
Save up to
33%
35%
Max. Cutting
Height
List
Price
OFFER PRICE
exc VAT
inc VAT
200mm
80mm
£174.95
£114.95
245mm
105mm
£269.95
£174.95 £209.94
£137.94
Prices exclude VAT unless stated otherwise
OFFER PRICE
£119.95
£143.94
exc VAT
inc VAT
17
35pc Air Mini 50mm Sander Kit
Air Needle Scaler
32mm Stroke
• Suitable for cleaning heavy paint
and rust scale from metal
surfaces.
• Palm control trigger mechanism.
• Replaceable scaler needles.
• Model No. SA51
Save
• List Price £119.95
• Designed for smart repair and spot refinishing.
• 90° Handle configuration with double finger trigger allows
unit to fit snugly into palm for added control.
• Handle exhaust reduces noise and surface contamination.
• Rubber finger cover reduces effects of chill.
Save
• Fitted with variable speed control.
• Supplied with selection
of Ø50mm discs and
pads with industry
standard fitting.
• Model No. SA720
• List Price £149.95
40%
Save
OFFER PRICE
OFFER PRICE
£74.95
£89.94
exc VAT
inc VAT
13mm Reversible Air Drill
with Keyless Chuck
£299.95
£359.94
exc VAT
inc VAT
75mm Super-Duty Air Cut-Off Tool
exc VAT
inc VAT
Low Vibration
Air Hammers
FREE
£77.95
£93.54
Model No
18
(SA
FREE
Ø75 x 2mm Cutting
Disc 10mm Bore x15
•
•
•
•
•
•
•
•
• Model No. PTC/3C
• Total Package
Lightweight aluminium alloy
List Price
housing for ultimate comfort
£36.75
and control.
Air motor with quality bearings for
smooth and powerful operation.
Integral sintered brass baffle with
rear exhaust gives quiet operation.
Fitted with metal safety guard
and safety trigger.
Supplied with spanner and key.
Disc Size: Ø75 x 2 x 10mm,
Free Speed: 20000rpm.
OFFER PRICE
Model No. SA650
List Price
exc VAT
£79.95
Save
46%
Retractable Air Hose Reels HD Mechanism with
Polyurethane Hose
• Hard wearing,
composite cased,
retracting air hose
reel supplied with
heavy-duty
polyurethane hose.
• Reel features ratchet or
free running operation
and is supplied with
wall/ceiling
mounting brackets.
)
ted
tra
llus
I
611
• Exhaust through handle
base for reduced noise
emission.
• Unit features encaged
planetary gear drive
assembly.
• Rotor runs on high quality
21pc Titanium Coated
ball bearings for long life
Drill Bit Set - Metric
and reliability.
• Model No. AK473M
• Fitted with Jacobs keyless
• List Price
chuck for fast bit changes.
£33.95
• Fully reversible drive with
fingertip control set above
trigger.
• Free Speed: 600-700rpm,
Operating Pressure:
OFFER PRICE
90psi.
• Model No. GSA27
exc VAT
• List Price
Save
£135.95
inc VAT
43%
• Powerful, extra
heavy-duty tool for
aluminium, steel,
stainless steel rivets
and structural rivets
from 3/16" to 1/4".
• Trigger operated
riveter with hardened
steel jaw assembly.
• Air-actuated vacuum
rivet shaft collector.
• Resilient grip for
added comfort and
hanging loop for use
with balancer.
• Supplied with three
riveting nozzles, two
spanners and oil can.
• Model No. SA316
• List Price £449.95
33%
38%
OFFER PRICE
£89.95
£107.94
Extra Heavy-Duty Vacuum System
Air/Hydraulic Riveter
£42.95
£51.54
6
(SA
)
ted
tra
llus
I
12
• Handle exhaust gives reduced noise output.
• Almost half the vibration level of a traditional
low cost air hammer.
• Accepts standard .401" Parker Taper shank chisels.
• Heat treated alloy steel impact components
Save up to
and contoured rubber grip make this tool
48%
both hard-wearing and comfortable to use.
inc VAT
OFFER PRICE
exc VAT
inc VAT
Model No
Speed
Stroke
List Price
SA611
2100bpm
89mm
£139.95
£74.95
£89.94
SA612
3000bpm
66mm
£124.95
£64.95
£77.94
Auto Rewind Control Air Hose Reels
Ø10mm ID - Rubber Hose
• Controlled, slow rewind which,
unlike traditional retractable
reels, returns the air hose at a
safe speed.
• Hose can be extended and
positioned at any length.
• Auto layering mechanism
distributes air hose
evenly on hose drum
preventing jamming.
• Fitted with high quality
rubber hose.
• Wall mounting aluminium
alloy swivel
bracket.
or
(SA895 Illustrated)
Save up to
36%
(SA821 Illustrated)
Save
29%
OFFER PRICE
exc VAT
inc VAT
Hose Size ID/OD
Length
List Price
SA894
8/12mm
15mtr
£259.95
£184.95
£221.94
SA895
10/15mm
10mtr
£279.95
£199.95
£239.94
or
Model No
Hose Size
ID/OD
Length
List Price
SA821
10/15mm
10mtr
£109.95
£69.95
£83.94
SA822
10/15mm
15mtr
£149.95
£99.95
£119.94
SA823
10/15mm
20mtr
£179.95
£114.95
£137.94
SA824
10/15mm
30mtr
£229.95
£154.95
£185.94
Prices exclude VAT unless stated otherwise
OFFER PRICE
exc VAT
inc VAT
Promotion Code GWE11
1/2"Sq Drive Extra Heavy-Duty
Air Impact Wrench
3/4"Sq Drive Composite
Air Impact Wrench
Twin Hammer
Air Ratchet Wrenches
or
(GSA20 Illustrated)
• Working/Maximum Torque:
420/520lb.ft.
• Ultimate Torque: 600lb.ft.
• Extra-heavy-duty.
• Power pin clutch.
• Suitable for heavy garage
and tyre shop use.
• Model No. SA5/S
• List Price £149.95
•
•
•
•
Working/Maximum Torque: 900/1000lb.ft.
Ultimate Torque: 1200lb.ft.
Twin hammer powerful air impact wrench.
Soft grip handle with downward facing exhaust makes
this wrench comfortable on the hands and ears and
limits the circulation of brake dust on wheel applications.
• Fingertip power control and direction via lever on rear of
wrench.
• Model No. GSA6004
• List Price £369.95
OFFER PRICE
Save
33%
OFFER PRICE
£99.95
£119.94
exc VAT
Save
inc VAT
38%
1"Sq Drive Super-Duty
Pistol/Standard Anvil Air
Impact Wrench - Pin Clutch
inc VAT
• Working/Maximum Torque: 1200/1350lb.ft.
• Ultimate Torque: 1600lb.ft.
• Suitable for heavy commercial tyre shop,
fleet and workshop use.
• Features air/torque device, to control
power output, and reverse action.
• Long pattern anvil for deeply
dished wheels.
• Model No. SA291
• List Price £489.95
• Model No. AK888M
• List Price £119.95
Save
inc VAT
43%
List Price
GSA20
3/8"Sq
£74.95
£33.95
£40.74
GSA21
1/2"Sq
£74.95
£33.95
£40.74
£119.95
£143.94
exc VAT
Save
inc VAT
48%
exc VAT
inc VAT
Low Noise & Vibration Reciprocating
Air Saws
Dust-Free Air Random Orbital Sanders
• Low noise and low vibration saw
suitable for professional use.
• Noise and vibration significantly
reduced by up to 50%, against
standard air saws.
• Quality components and precision
assembly techniques prolong the
tool’s life and give a smooth, low
vibration performance.
• Internal motor features spring
loaded vanes allowing the
tools to run more efficiently
using less air.
• High quality dual action
sanders designed for
the professional
bodyshop and garage.
Drive
OFFER PRICE
OFFER PRICE
£279.95
£335.94
OFFER PRICE
exc VAT
inc VAT
Model No
• Aluminium housing with articulated sanding arm.
• Features belt tracking control, heavy-duty nose roller
and one-handed trigger operation.
• Suitable for sanding otherwise inaccessible areas
such as around door shuts.
• Wide belt makes tool suitable for welding work too.
• Model No. SA355
• List Price £229.95
8pc 1"Sq Drive Deep
Impact Socket Set - Metric
exc VAT
Save
55%
20 x 520mm Air Belt Sander
FREE
Working/Maximum Torque: 1400/1600lb.ft.
Ultimate Torque: 1800lb.ft.
Suitable for commercial and agricultural vehicle use.
Pin clutch gives high power-to-weight ratio.
Four-position torque control with reverse.
Save
36%
Supplied with side handle
and spring balance hoop.
• Model No. SA682
OFFER PRICE
• List Price £579.95
3
(SA
)
ted
tra
llus
I
45
(MAT150SC Illustrated)
d)
strate
Save up to
S Illu
38%
110A
(MAT
Model No
Pad Size
Free Speed
List Price
MAT150AS
Ø150mm
3500-10000rpm
£219.95
OFFER PRICE
exc VAT
inc VAT
£144.95
• Fully enclosed blade chuck and safety trigger.
• Low noise exhaust reduces noise emission
by well over 50% to 85dB.
• Suitable for a wide variety of bodyshop
applications.
Save up to
35%
Model No
£173.94
MAT150SC
Ø150mm
3500-10000rpm
£229.95
£154.95
£185.94
SA345
MAT110AS
220x112mm
3500-10000rpm
£274.95
£169.95
£203.94
SA346
)
ted
tra
llus
I
46
3
(SA
(MAT150AS Illustrated)
Promotion Code GWE11
exc VAT
1"Sq Drive Heavy-Duty Air
Impact Wrench - Long Anvil
•
•
•
•
•
•
£369.95
£443.94
£229.95
£275.94
• Contoured and insulated handle - reduces
chill and vibration.
• Heavy-duty twin pawl ratchet mechanism.
• 60lb.ft Torque output.
• Low noise exhaust adjusts 360°.
• Four speed, integral air regulator.
Maximum Cutting
Capacity
3mm (Steel),
3.5mm (Aluminium)
10mm (Steel),
12mm (Aluminium)
Prices exclude VAT unless stated otherwise
OFFER PRICE
exc VAT
inc VAT
Stroke
Free Speed
List Price
10mm
10000spm
£229.95
£149.95
£179.94
25mm
5000spm
£249.95
£164.95
£197.94
19
50ltr Oil Free Belt
Drive Compressor
2hp
Direct Drive Compressors 2hp
or
(SAC2420E Illu
strated)
•
•
•
•
•
•
Air Displacement: 6.8cfm (193ltr/min).
(SAC5020
E Illustrat
Maximum Pressure: 116psi/8bar.
ed)
Maximum Free Air Delivery: 4.6cfm (130ltr/min).
Aluminium cylinder head with cast iron cylinder gives added resistance to wear.
Precision welded receiver tank manufactured to meet Pressure Vessel Directive 87/404/EEC.
Fitted with fully automatic pressure cut-out switch and twin gauges displaying tank and working pressures.
Save up to
45%
Receiver Capacity
Dimensions (W x D x H)
Weight
List Price
SAC2420E
24ltr
570 x 360 x 570mm
24kg
£219.95
£119.95
£143.94
SAC5020E
50ltr
650 x 390 x 669mm
28kg
£269.95
£159.95
£191.94
24ltr Direct Drive Compressor
1.5hp
• Maximum Free Air Delivery:
3.4cfm (96ltr/min).
• Air Displacement: 4.8cfm (136ltr/min).
• Compact and portable, this compressor is suitable for use
with the Sealey range of air nailers, tyre inflators and air
brushes.
• Features four anti-vibration rubber feet for added
stability when in use.
• Fitted with twin gauges
displaying tank and
OFFER PRICE
working pressures.
• Model No. SA0615
exc VAT
• List Price
Save
£229.95
inc VAT
48%
£119.95
£143.94
OFFER PRICE
OFFER PRICE
exc VAT
inc VAT
Model No
6ltr Direct Drive
Compressor
1.5hp
• Air Displacement: 7.3cfm
(205ltr/min).
• Maximum Free Air Delivery:
5.1cfm (145ltr/min).
• Max. Pressure: 145psi/10bar.
• Aluminium cylinder with cast
iron lining gives reduced
weight and improved
resistance to wear.
• Oil free, single piston pump
is belt driven by a 2hp motor
and fixed to a vertical type
tank, saving space around
the workshop.
• Fitted with fully automatic
pressure cut-out switch
and air regulator
with gauge.
• Model No. SAC05020
• List Price £299.95
Save
45%
exc VAT
inc VAT
50ltr Direct Drive Compressor
2hp
•
•
•
•
Air Displacement: 6cfm (170ltr/min).
Maximum Free Air Delivery: 4.2cfm (119ltr/min).
Maximum Pressure: 116psi/8bar.
Aluminium head with cast iron cylinder gives added
resistance to wear.
• Fitted with fully automatic pressure cut-out switch and twin
gauges displaying tank
and working pressures.
OFFER PRICE
• Model No. SA2415
• List Price £249.95
Save
48%
£129.95
£155.94
exc VAT
inc VAT
• Air Displacement: 7cfm (200ltr/min).
• Maximum Free Air Delivery: 4.8cfm (135ltr/min).
• Maximum Pressure:
116psi/8bar.
OFFER PRICE
• Model No. SA5020
• List Price
exc VAT
£319.95
Save
50ltr Direct Drive
Compressor 3hp
100ltr Direct Drive
Compressor 3hp
• Air Displacement:
12.6cfm (356ltr/min).
• Maximum Free Air
Delivery: 8.75cfm
(248ltr/min).
• Maximum Pressure:
130psi/9bar.
• V-Twin pump
with aluminium
cylinders and
cast iron liners
for reduced weight
and improved
resistance to wear.
• Pump directly
coupled to
heavy-duty
induction motor for
reliable and quiet operation.
• Precision welded receiver tank manufactured
to meet Pressure Vessel Directive 87/404/EEC.
• Fitted with fully automatic pressure cut-out
switch, air regulator and pressure gauges
for tank and supply.
• Model No. SAC05030
Save
50%
• List Price £499.95
• Air Displacement:
12.6cfm (356ltr/min).
• Maximum Free Air
Delivery: 8.75cfm
(248ltr/min).
• Maximum
Pressure:
130psi/9bar.
• V-Twin pump
with
aluminium
cylinders and
cast iron liners.
• Pump directly
coupled to heavy-duty
induction motor
for reliable and
quiet operation.
• Precision welded
receiver tank
manufactured to
meet Pressure Vessel Directive 87/404/EEC.
• Fitted with fully automatic pressure cut-out switch, air
regulator and pressure gauges for tank and supply.
• Model No. SAC10030
• List Price £629.95
20
£164.95
£197.94
OFFER PRICE
£249.95
£299.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
47%
£169.95
£203.94
inc VAT
OFFER PRICE
Save
44%
£349.95
£419.94
exc VAT
inc VAT
Promotion Code GWE11
FREE Air Tool Kit
Belt Drive Compressors
with Cast Cylinders
with any of these
three models
• Air Tool Kit consists of:
SA2001/FR - Air Filter/Regulator
SA1/1212 - Double Male Union
AHC5 - Air Hose 5mtr x Ø8mm with 1/4"BSP Unions
SA9302 - Professional Airline Gauge
ACX60 - Air Tool Coupling Kit
• Model No. AIRKIT6
• List Price £89.25
•
•
•
•
Air Displacement: 10cfm (283ltr/min).
Maximum Free Air Delivery: 7.25cfm (205ltr/min).
Maximum Pressure: 145psi/10bar.
Heavy-duty drive guard protects belt and flywheel that is designed to force
air over the pump to aid cooling.
• Supplied with full CE certification, test certificates and operation/maintenance manual.
Model No.
(SAC0102B
Illustrated)
Save
38%
OFFER PRICE
exc VAT
inc VAT
Tank Size
Wheels
List Price
SAC0502B
50ltr
£649.95
£399.95
£479.94
SAC0102B
100ltr
£719.95
£449.95
£539.94
SAC0152B
150ltr
£799.95
£499.95
£599.94
FREE Air Tool Kit
Belt Drive Compressors
with Cast Cylinders
with any of these
four models
• Air Tool Kit consists of:
SA2 - Air Impact Wrench 1/2"Sq Drive
AK56/11M - Impact Socket Set 10pc 1/2"Sq Dr Metric
SA9302 - Professional Airline Gauge
AHC5 - Air Hose 5mtr x Ø8mm with 1/4"BSP Unions
ACX60 - Air Tool Coupling Kit
SA1/1414 - Double Male Union 1/4"BSPT to 1/4"BSPT
• Model No. AIRKIT2
• List Price £146.20
•
•
•
•
•
Air Displacement: 13.4cfm (380ltr/min).
Maximum Free Air Delivery: 9.7cfm (275ltr/min).
Maximum Pressure: 145psi/10bar.
Twin capacitors and a centrifugal switch aid trouble free start up on a 13amp supply.
Heavy-duty drive guards protect belt and flywheel that is designed to force air over the
pump to aid cooling.
• Supplied with full CE certification, test certificates and operation/maintenance manual.
Model No.
(SAC1153B
Illustrated)
Save up to
37%
OFFER PRICE
exc VAT
inc VAT
Tank Size
Wheels
List Price
SAC1503B
50ltr
£749.95
£469.95
£563.94
SAC1103B
100ltr
£819.95
£519.95
£623.94
SAC1153B
150ltr
£899.95
£579.95
£695.94
SAC1203B
200ltr
£999.95
£639.95
£767.94
FREE Air Tool Kit
Belt Drive Compressors
with Cast Cylinders
with any of these
three models
• Air Tool Kit consists of:
SA2 - Air Impact Wrench 1/2"Sq Drive
SA20/S - Air Ratchet Wrench 3/8"Sq Drive
SA25 - Air Rotary Cut-Off Tool 75mm
SA2001/FR - Air Filter/Regulator
SA1/1212 - Double Male Union
AHC5 - Air Hose 5mtr x Ø8mm with 1/4"BSP Unions
ACX60 - Air Tool Coupling Kit
• Model No. AIRKIT5
• List Price £241.15
•
•
•
•
Air Displacement: 15cfm (425ltr/min).
Maximum Free Air Delivery: 10.9cfm (309ltr/min).
Maximum Pressure: 145psi/10bar.
These top of the range single phase compressors are suitable
for the professional workshop and are fitted with a genuine 3hp motor.
• Twin capacitors and a centrifugal switch aid trouble free start up on a
good 13Amp supply.
• However on these models we recommend fitting a 16Amp plug and
connecting to a 20Amp supply protected by a type C circuit breaker.
• Pump features heavy-duty full cast cylinders, capped by an alloy head
for improved heat dissipation and long life.
(SAC2203B
Illustrated)
Promotion Code GWE11
Save up to
35%
Tank Size
Wheels
SAC2103B
100ltr
£969.95
£629.95
£755.94
SAC2153B
150ltr
£1,049.95
£689.95
£827.94
SAC2203B
200ltr
£1,149.95
£749.95
£899.94
Prices exclude VAT unless stated otherwise
List Price
OFFER PRICE
exc VAT
inc VAT
Model No.
21
200ltr Belt Drive
Compressor
5.5hp 3ph
2-Stage with
Cast Cylinders
270ltr Belt Drive
Compressors
2 x 3hp with
Cast Cylinders
• Air Displacement:
20.7cfm (586ltr/min).
• Maximum Free Air Delivery: 15.1cfm (419ltr/min).
• Maximum Pressure: 145psi/10bar.
• Heavy-duty three phase compressors suitable for the professional
workshop.
• Two stage pump system coupled with a 5.5hp motor maximises
performance to keep running costs low compared to single stage
single phase model.
• Pumps have heavy-duty full cast cylinders, capped OFFER PRICE
by alloy heads for improved heat dissipation
and long life.
• Model No. SAC42055B
• List Price £1,799.95
• Maximum
Pressure:
145psi/10bar.
• Fitted with two
genuine 3hp
motors and two
identical pumps.
• Twin capacitors and a
centrifugal switch aid
trouble free starting on a 230V 32A supply.
• Supplied with a control box that allows stepped start up or just
one motor/pump running at a time.
• Pumps feature heavy-duty full cast cylinders, capped by alloy heads for improved
heat dissipation and long life.
Save
33%
£1,199.95 exc VAT
£1,439.94 inc VAT
Model No.
Air Displacement
Max. Free Air Delivery
List Price
SAC1276B
26.8cfm (759ltr/min)
19.4cfm (549ltr/min)
£2,699.95
£1,699.95
£2,039.94
SAC2276B
30.0cfm (850ltr/min)
21.8cfm (618ltr/min)
£2,999.95
£1,999.95
£2,399.94
270ltr Belt Drive
Compressor 10hp
3ph 2-Stage with
Cast Cylinders
• Air
Displacement:
29.7cfm (841ltr/min).
• Maximum Free Air
Delivery: 21.5cfm
(609ltr/min).
• Maximum Pressure: 145psi/10bar.
• Heavy-duty three phase compressor.
• Two stage pump system coupled with a 7.5hp motor
maximises performance to keep running costs low
compared to single stage, single phase model.
• Pump has heavy-duty full cast cylinders, capped by an
alloy head for improved heat dissipation and long life.
• Model No. SAC52775B
• List Price £2,199.95
• Air
Displacement:
38.6cfm
(1093ltr/min).
• Maximum
Free Air
Delivery:
28cfm
(793ltr/min).
• Maximum
Pressure:
145psi/10bar.
• Heavy-duty three
phase compressor.
• Two stage pump system coupled with
a 10hp motor maximises performance to keep running
costs low compared to single stage, single phase model.
• Supplied with a Star Delta Starter which must be used to
connect to the power supply in order to comply with
current legislation.
• Model No. SAC62710B
• List Price £3,999.95
Save
36%
OFFER PRICE
£1,399.95 exc VAT
£1,679.94 inc VAT
• Maximum Pressure:
145psi/10bar.
• Fully mobile
compressor with
Honda power unit
coupled to heavy-duty,
(SAC5055
Illustrated)
twin piston, cast iron pump.
• Fitted heavy-duty rubber
transport wheels and
protected by 360° roll cage.
• Features twin gauges and air outlet regulator.
22
Save
35%
OFFER PRICE
£2,599.95 exc VAT
£3,119.94 inc VAT
POWERED by
Belt Drive Compressors
with Petrol Engine
Motor Output
37%
OFFER PRICE
exc VAT
inc VAT
270ltr Belt Drive
Compressor 7.5hp
3ph 2-Stage with
Cast Cylinders
Model No.
Save up to
Air Displacement
• Maximum
Pressure:
145psi/10bar.
• Static compressor
with Honda GX200 6.5hp
power unit coupled to
(SAC1565 Illustra
ted)
heavy-duty, two stage twin
piston, cast iron pump.
• Pump has heavy-duty full cast cylinders, capped by alloy heads
for improved heat dissipation and long life.
• Features gauge and air outlet.
Max. Free Air Delivery
Receiver Capacity
Dimensions (W x D x H)
List Price
Save up to
41%
OFFER PRICE
exc VAT
inc VAT
SA5040
4hp
10.7cfm (303ltr/min)
7.8cfm (220ltr/min)
50ltr
970 x 470 x 730mm
£1,699.95
£999.95
£1,199.94
SA5055
5.5hp
15.8cfm (447ltr/min)
11.5cfm (326ltr/min)
50ltr
970 x 470 x 760mm
£1,999.95
£1,199.95
£1,439.94
SA1565
6.5hp
20.9cfm (591ltr/min)
15.2cfm (430ltr/min)
150ltr
1360 x 540 x 1110mm
£2,899.95
£1,799.95
£2,159.94
Prices exclude VAT unless stated otherwise
Promotion Code GWE11
24ltr Low Noise Cabinet
Compressor 2.5hp
90ltr Low Noise
Compressor 2.5hp
• Air Displacement: 10.3cfm (292ltr/min).
• Maximum Free Air Delivery:
7.5cfm (212ltr/min).
• Maximum Pressure: 145psi/10bar.
• Cast iron cylinder head, compact size
and quiet running features make this
compressor unit suitable for installation
near or in working area.
• Noise output is just 57dB.A (at 1m).
• Includes heavy-duty single phase electric
motor with soft start circuitry to enable
smooth operation from 13Amp supply.
• Integral 24 litre tank may be
supplemented by additional receiver
(see Model No. SA200T).
• Provides both regulated and unregulated
pressure output with glycerine filled
gauges on control panel for precise
adjustment.
• Model No. SAC82425VLN
• List Price £2,399.95
• Air Displacement: 10.3cfm (292ltr/min).
• Maximum Free Air Delivery:
7.5cfm (212ltr/min).
• Maximum Pressure: 145psi/10bar.
• Heavy-duty compressor suitable for
garage, bodyshop and industrial
applications.
• Fitted with cast iron cylinder head
enabling slower revving and improved
pump life.
• Fully enclosed, insulated design gives
silent running of just 66dB.A (at 1m)
and protects vital components from
damage.
• Features fully automatic pressure
cut-out switch with twin gauges
displaying tank and working pressures.
• Heavy-duty 2.5hp single phase
electric motor with soft start feature.
• Model No. SAC89025VLN
• List Price £1,899.95
OFFER PRICE
OFFER PRICE
£1,199.95 exc VAT
£1,439.94 inc VAT
Save
38%
Compressor Oils
Model No
or
• Maximum Pressure:
145psi/10bar.
• Fitted with cast iron
cylinder head enabling
slower revving and
improved pump life.
• Fully enclosed,
insulated design
gives silent running
and protects vital
components from
damage.
• Features fully automatic
pressure cut out switch
and tank pressure gauge.
• Control box features tachometer
for monitoring use and optimizing
service times.
Model No.
Motor Output
Save up to
33%
Size
Pack Qty
List Price
FSO1S
1
1ltr
1
£36.45
FSO1
1
1ltr
12
£371.95
FSO5
1
5ltr
1
£139.95
SCPO1S
2
1ltr
1
£7.95
SCPO5
2
5ltr
1
£32.95
CPO1S
3
1ltr
1
£10.45
CPO/1
3
1ltr
12
£105.45
CPO/5
3
5ltr
1
£37.45
Fully Synthetic
Compressor Oil
Screw
Compressor Oil
1
LN Illustrated)
Voltage/Phase
Air Displacement
£29.94
£311.94
£119.94
£7.50
£29.94
£8.70
£89.94
£29.94
Compressor
Oil
2
(FSO1S Illustrated)
(SAC42755B
OFFER PRICE
exc VAT
inc VAT
£24.95
£259.95
£99.95
£6.25
£24.95
£7.25
£74.95
£24.95
3
(CPO1S Illustrated)
Low Noise Compressors
Belt Drive with
Cast Cylinders
Save
37%
(SCPO1S Illustrated)
£1,499.95 exc VAT
£1,799.94 inc VAT
Save up to
33%
Max. Free Air Delivery
Tank Size
Dimensions (W x D x H)
List Price
OFFER PRICE
exc VAT
inc VAT
3hp
230V - 1ph
15cfm (425ltr/min)
10.9cfm (309ltr/min)
200ltr
1465 x 600 x 1160mm
£2,999.95
£1,999.95
£2,399.94
SAC42755BLN
5.5hp
415V - 3ph
21.1cfm (598ltr/min)
15.3cfm (434ltr/min)
270ltr
1550 x 600 x 1260mm
£3,499.95
£2,399.95
£2,879.94
SAC72775BLN
7.5hp
415V - 3ph
32.6cfm (924ltr/min)
23.6cfm (668ltr/min)
270ltr
1550 x 600 x 1260mm
£3,899.95
£2,679.95
£3,215.94
SAC2203BLN
270ltr Low Noise Screw
Compressor 10hp
270ltr Screw Compressor
10hp with Dryer
• Maximum Free Air Delivery: 30.2cfm
(860ltr/min).
• Maximum Pressure: 145psi/10bar.
• High performance, top of the range screw
compressors offer high continuous output
of air with low running costs.
• Compressed air 24/7 with minimal downtime.
• Very few moving parts, means servicing/
maintenance will be less frequent and less
expensive compared to a piston equivalent
model.
• Insulated Class F 10hp motor with IP54
protected control box which is easy
to operate with digital display
showing key information like
air pressure, oil temperature
and maintenance schedules.
• Features an insulated outer
casing to minimise noise
(67dB.A at 1m) and offers
protection to inner components.
• Model No. SSC12710
• List Price £7,499.95
•
•
•
•
Maximum Free Air Delivery: 30.2cfm (860ltr/min).
Maximum Pressure: 145psi/10bar.
Provides compressed air 24/7 with minimal downtime.
Built-in air dryer allows the unit to produce cleaner
purified air especially required when paint spraying.
• The dryer can also help prevent corrosion which
may cause airways to be clogged and also helps
prevent air from freezing.
• Model No. SSC12710D • List Price £8,999.95
OFFER PRICE
£5,349.95 exc VAT
£6,419.94 inc VAT
Promotion Code GWE11
OFFER PRICE
Save
Save
29%
33%
Prices exclude VAT unless stated otherwise
£5,999.95 exc VAT
£7,199.94 inc VAT
23
Wheel Dolly Set 680kg Capacity
Wheel Skate Hydraulic
650kg Capacity
NEW
7pc Drop-Forged Panel Beating Set
with Hickory Shafts
ble
Availa ly
Ju
end of
• Can handle up to 250mm profiles.
• Fitted with four Ø75mm metal castors,
two lockable.
• Heavy-duty steel plate with rust resistant finish.
• Each dolly features a side handle for easy
carrying.
• Model No. WS681
OFFER PRICE
• List Price £99.95
£69.95
£83.94
Save
30%
exc VAT
inc VAT
• Steel chassis with PVC rollers and four Ø100mm
PU castors, two fitted with brakes.
• Capacity: 650kg.
Save
• Maximum Opening: 625mm.
38%
• Maximum Tyre Profile: 250mm.
• Weight: 17kg.
OFFER PRICE
• Note: Sold as singles,
but must be used
exc VAT
in pairs.
• Model No. WS650
inc VAT
• List Price £159.95
£99.95
£119.94
28ltr Combination Dust-Free/Wet & Dry Vacuum System
Air/Electric with Sander (MAT150AS)
• Polished,
drop-forged steel
dollies.
• Professional hickory
handled hammers.
• Model No. CB507
• List Price £87.95
Save
34%
OFFER PRICE
£57.95
£69.54
exc VAT
inc VAT
10tonne Hydraulic Body Repair Kit
• Microchip controlled electric and air supply
circuit which monitors power/air to the
power tool and automatically activates
the suction.
• Suction overruns by 10 seconds to clear
the hose of dust.
• Supplied with vacuum hose, air hose,
air couplings, Ø150mm random orbital
sander (MAT150AS) and accessory kit
for use as a standard wet and
dry vacuum.
• Auxiliary socket for up to 1500W
power tool.
• All DFS tools require an
independent power/air
supply.
• Model No. DFS55A
• List Price £699.95
• Tough steel components, with threaded connectors to
interchange easily.
• SuperSnap® pipework for quick connections.
• Connecting parts zinc/cadmium plated for long life.
• Model No. RE83/10
• List Price £319.95
Save
38%
OFFER PRICE
Save
31%
£479.95
£575.94
OFFER PRICE
£199.95
£239.94
exc VAT
inc VAT
exc VAT
inc VAT
Bodyshop Straightener Package Kit
Package Includes:
• 10tonne Body Straightner
• 7pc Panel Beating Set
• Air Underbody Coating Gun
• 170mm 6-Speed Sander/Polisher
• 150mm Air Random Orbital Sander
• 10tonne Body Repair Kit
10tonne Straightner Kit
• Complete with
2 x Pull Clamps,
2 x Sill Clamps,
2 x Chains,
2 x Chain Hooks,
Carriage Anchorage Tube,
2 x Tube Stands.
• Model No. DZRE92/C
• List Price £949.95
• Package Model No. BODY2
• Total Package List Price £1485.70
Body Repair Kit
6 Speed Sander/Polisher
• Model No. RE97/10
• List Price £259.95
• Model No. MS900PS
• List Price £134.95
Save
43%
OFFER PRICE
£849.95 exc VAT
£1019.94 inc VAT
24
Panel Beating Kit
Underbody Coating Gun
Air Sander
• Model No. CB707
• List Price £59.95
• Model No. SG139
• List Price £15.95
• Model No. SA77
• List Price £64.95
Prices exclude VAT unless stated otherwise
Promotion Code GWE11
Professional Suction Feed
Spray Gun 1.8mm Set-Up
HVLP Gravity Feed
Spray Gun 1.3mm
Set-Up
5pc Air Accessory Kit
NEW
• Suitable for a wide range of
materials.
• Standard Set-Up: 1.8mm.
• 1.5mm and 2.0mm
Set-ups available.
• Supplied with cam action
suction pot.
• Nozzle and needle in stainless
steel to allow use with water
based paints.
• Model No. S701
• List Price £74.95
• Low affinity for paint
making this unit ideal for
water based paints and
easy to clean.
• Adjustable paint, fan width
and air regulator controls.
• Supplied with 1.3mm
set-up.
• 1.4, 1.5, 1.7, 2.0mm
Set-ups available
separately.
• Model No. HVLP-751
• List Price £139.95
FREE
• Contents: Gravity Feed Spray Gun, Blowgun,
Tyre Inflator, Paraffin Gun, Coiled Air Hose with Couplings.
• Components are fitted with 1/4"BSP threaded unions.
• Model No. SA33G
• List Price £47.95
• Model No. BSGC5
• List Price £27.45
Save
42%
Save
39%
£84.95
£101.94
exc VAT
inc VAT
Spray Gun Cleaning Tanks
Save
• Model No. BSGC/3
• List Price £3.95
53%
OFFER PRICE
(SM24/1 Illustrated)
£34.95
£41.94
exc VAT
inc VAT
exc VAT
inc VAT
Flammables Storage Cabinet
915 x 460 x 1830mm
2.2tonne Pneumatic
Paint Can Crusher
• Suitable for
containing
water and
detergent
necessary
for cleaning
water based
spray guns.
• Fully automatic
operation close lid to
start and
open lid to
stop.
• Powerful and
reliable piston
pump system.
• Reduce your waste
disposal costs* - crushing
paint cans minimizes the
volume of your
hazardous waste.
• Air operated paint
can press with
safety lock-out
device.
• Bench mounting
unit with outlet for
waste paint
collection.
* For disposal by
volume customers.
• Model No. HCC08
• List Price £449.95
• Sturdy metal
construction with
yellow powder
coat and BS 5378
warning signs.
• Two door, with
two-point key lock
and two keys.
• Features three
adjustable, lipped
shelves and
liquid-tight base
to retain spills.
• 155mm Raised,
leak-proof door sill.
• Size (W x D x H):
915 x 460 x 1830mm.
• Model No. FSC03
• List Price £749.95
Save
Save up to
33%
44%
Model No
3pc Spray Gun
Cleaning Brush Set
OFFER PRICE
OFFER PRICE
£27.95
£33.54
FREE
20pc Spray Gun
Cleaning Set
WxDxH
Gun/Pot
Capacity
List
Price
OFFER PRICE
exc VAT inc VAT
SM24/1
430x450x1300mm
1/1
£739.95
£429.95 £515.94
SM23/2
572x470x1300mm
2/2
£849.95
£479.95 £575.94
OFFER PRICE
£299.95
£359.94
OFFER PRICE
exc VAT
inc VAT
£499.95
£599.94
exc VAT
inc VAT
Infrared Panel Dryer - Short Wave 3000W/230V
Concertina Panel Stand
• Min./Max. Height:
800/1350mm.
• Min./Max. Width:
200/1400mm.
• Extending stand
with height
adjustment, ideal
for a variety of
applications.
• Mounted on
smooth rolling
castors with brake.
• Soft padded arms
help prevent
damage to
workpiece.
• Ideal for
professional
bodyshop use.
• Model No. MK57
• List Price £299.95
• Three 1000Watt high
output short wave
lamps in three
individually switched
cassettes.
• Lamps emit short wave
infrared heat ideal for
optimizing drying of
water based paints.
• Flexible system allows
each cassette to be
adjusted and locked in
position around the
contours of the vehicle,
ensuring maximum
area coverage.
• Height adjustment
locking gas strut,
offering near
weightless movement
of the cassette arm.
• Model No. IR3000
• List Price £1779.95
OFFER PRICE
Save
47%
Promotion Code GWE11
Save
33%
£159.95
£191.94
OFFER PRICE
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Save
33%
£1199.95 exc VAT
£1439.94 inc VAT
25
Industrial High Velocity Fans
Industrial High Velocity Drum Fans
• 3-Speed high output industrial fan.
• Balanced 3 blade propeller.
• Ideal for industrial, commercial, automotive
and agricultural use.
• Power Supply: 230V.
•
•
•
•
•
Save up to
)
ated
lustr
30 Il
D
V
High velocity industrial drum fan.
(H
Heavy-duty gauge steel casing, guard and frame.
Mobile unit allows control of airflow to exactly where it is needed.
Quiet and safe operation.
Suitable for use in industrial, commercial, agricultural, automotive workshop and
showroom applications.
40%
Fan
Diameter
42%
Speed Range
Maximum Airflow
Speeds
OFFER PRICE
exc VAT
inc VAT
HVD24
610mm(24") 210-280W
900-1100rpm
173mtr³/min (6109cfm)
3
£249.95
£149.95
£179.94
£64.95
£42.95
£51.54
HVD30
760mm(30") 190-350W
650-950rpm
230mtr³/min (8121cfm)
3
£299.95
£174.95
£209.94
£79.95
£47.95
£57.54
HVD36
915mm(36")
735/940rpm
258mtr³/min (9095cfm)
2
£349.95
£209.95
£251.94
Model No
Power
Fan Diameter
List
Price
HVF16
80W
400mm(16")
HVF18
90W
450mm(18")
Industrial Vacuum
Cleaners Stainless Bin
or
or
• Ø35mm hosing.
• Telescopic rigid extension
tube plus tools for wet
and dry operations.
• Designed for use with
cartridge filter or dust
collection bag
(optional) for fast
and clean disposal
of waste.
• Blower facility.
FREE
(PC200SD Illustrated)
9" Desk Fan 2-Speed
Push-Button 230V
Save up to
• Model No. SDF9W
• List Price £25.95
29%
Motor
Power
Drum
Size
List
Price
OFFER PRICE
exc VAT
inc VAT
PC200SD
1250W
20ltr
£119.95
£89.95
£107.94
PC300SD
1400W
30ltr
£169.95
£119.95
£143.94
Power
260W
30ltr Wet & Dry Industrial
Vacuum Cleaner 1400W
with Stainless Bin
& Auto Start
• Powerful 1400Watt
motor head gives
incredible suction
through Ø35mm
hosing.
• Blower facility.
• Auto-starts when
dust-free tool is
started and
auto-stops 10
seconds after tool
is switched off - to
ensure tool and hose
are left free of dust.
• Telescopic rigid
extension tube plus
tools for wet and dry
operations.
• Supplied with
cartridge filter and
wet-use foam filter.
• Model No.
PC300SDAUTO
• List Price £199.95
77ltr Industrial Vacuum Cleaner
Stainless Drum 2400W
Swivel Bin Empty
20ltr Wet & Dry Valeting Machine
with Accessories 1250W
• Cleans carpets, car interiors,
fabrics and upholstery.
• Supplied with carpet lance,
hand held lance, full wet and
dry vacuum accessory kit,
including stainless steel
telescopic rigid extension
tube, cartridge filter and
foam filter.
• Features safety shut-off
for wet operation.
• External detergent
tank for easy filling.
• Model No. PC310
• List Price £299.95
Save
35%
OFFER PRICE
£129.95
£155.94
OFFER PRICE
exc VAT
inc VAT
exc VAT
inc VAT
FREE
5ltr Carpet/Upholstery
Detergent
• Model No.
VMR925S
• List Price
£18.45
Save
47%
OFFER PRICE
£159.95
£191.94
exc VAT
inc VAT
50ltr Super Professional AutoValet Wet & Dry
Valeting Machine
Stainless Bin
• 25ltr External detergent tank for
easy filling and a 50ltr recovery tank.
• Comprehensive set of tools and
accessories for wet and dry car
interior cleaning.
• 100psi Operating pressure.
• Model No. VMA913
• List Price £799.95
• Dual filtration system for superior
performance.
• Features safety shut-off for wet
operation.
• Trolley with swivel drum and two rear
locking wheels for easy emptying.
• Front castors for added manoeuvrability.
• Ø38mm Accessory kit, 3.2mtr cable
with 3-pin plug, cloth and paper
cartridge filters.
• Illustrated with optional squeegee with
foot operated adjustment (PC477AK1).
• Replacement Cartridge Filter: PC477.PF
• Replacement Cloth Filter Assembly:
PC477.CF
• Model No. PC477
• List Price £569.95
OFFER PRICE
Save
33%
26
Save up to
(HVD
d)
strate
36 Illu
List
Price
Model No
Model No
)
ated
lustr
24 Il
(HVD
£379.95
£455.94
OFFER PRICE
exc VAT
inc VAT
£479.95
£575.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Save
40%
Promotion Code GWE11
95bar Pressure Washer
with TSS & Rotablast
Nozzle® 6ltr/min
110bar Pressure Washer with
TSS & Rotablast Nozzle® +
Accessory Kit 6ltr/min
• Lightweight and
compact unit designed
for domestic use.
• Supplied with 3mtr
hose, high/low pressure
lance, detergent bottle
and fixed brush nozzle
attachment.
• Includes Rotablast
Nozzle® which helps
develop the same
Effective Cleaning
Power (ECP) as a
2300psi washer.
• Suitable for a wide
range of applications.
• Model No. PC2351
• List Price £124.95
• Designed for light trade and
domestic use.
• Supplied with 5mtr hose and
accessory kit including
high/low pressure lance,
rotary and fixed brush
attachments and patio
brush attachment with
integral detergent container.
• Features Rotablast Nozzle®
which helps develop the
same Effective Cleaning
Power (ECP) as a
2700psi washer.
• Model No. PC2701
• List Price
£199.95
Save
40%
•
•
•
•
•
Heavy-duty portable unit
for light trade and
domestic use.
Supplied with 8mtr hose
with storage reel, jet/flat
lance, detergent bottle
and Rotablast Nozzle®
which helps
develop the same
Effective Cleaning
Power (ECP) as a
2950psi washer.
Manufactured with
heavy-duty wheels
for easy transportation
over rough terrain.
Model No. PC2901
List Price £249.95
OFFER PRICE
OFFER PRICE
£74.95
£89.94
120bar Pressure Washer with TSS
& Rotablast Nozzle®
6.3ltr/min
exc VAT
inc VAT
130bar Pressure Washer
with TSS & Rotablast
Nozzle® 6.3ltr/min
• Heavy-duty induction motor.
• Pump unit fitted with high
pressure by-pass to
preserve pump life.
• Supplied with hose,
trigger Vari-Nozzle
and Rotablast
Nozzle® which
helps develop the
same Effective
Cleaning Power
(ECP) as a
3200psi
washer.
• Includes
foam
applicator
for
pre-wash.
• Model No. PC2950
• List Price £279.95
£99.95
£119.94
OFFER PRICE
exc VAT
inc VAT
Save
Save
50%
48%
140bar Pressure Washer with TSS &
Rotablast Nozzle®
6.7ltr/min
140bar Pressure Washer with TSS &
Rotablast Nozzle®
7.5ltr/min
• Produces enough power
to pump 400 litres of
water every hour.
• Pump fitted with high
pressure by-pass to
preserve pump life.
• Supplied with 6mtr hose,
built in hose reel,
Vari-Nozzle and Rotablast
Nozzle® which helps
develop the same Effective
Cleaning Power (ECP) as
a 3400psi washer.
• Includes integral detergent
tank and detergent flow
control valve.
• Model No. PC3401
• List Price £349.95
• Produces enough
power to pump
450 litres of
water every
hour.
• Supplied with
8mtr hose reel,
Vari-Nozzle and
Rotablast Nozzle®
which helps develop
the same Effective
Cleaning Power
(ECP) as a 3450psi
washer.
• Includes integral
detergent tank with
detergent flow
control valve and
holder for extra
5ltr tank.
• Model No. PC3451
• List Price £439.95
FREE
FREE
£129.95
£155.94
exc VAT
inc VAT
Ø150mm Rotary Brush
• Model No.
PCAK08
• List Price £19.95
Patio/Deck Surface
Cleaner
• Model No.
PCAK10
• List Price £39.95
Water Broom
OFFER PRICE
Save
43%
£159.95
£191.94
exc VAT
inc VAT
• Model No.
PCAK09
• List Price
£29.95
Save
43%
Patio/Deck Surface
Cleaner
OFFER PRICE
£199.95
£239.94
FREE
exc VAT
inc VAT
• Model No.
PCAK10
• List Price £39.95
130bar Pressure Washer
7ltr/min 2.4hp Petrol
220bar Pressure Washer 10ltr/min
Self Priming 6.5hp Petrol
• Petrol powered pressure washer with
recoil starting.
• 5mtr Pressure hose, 1mtr gun and lance
and adjustable nozzle.
• Low-pressure liquid detergent injection
system.
• Safety latch on trigger and automatic
low-oil engine shutdown.
• Output Pressure/Flow: 1300psi/420ltr/hr.
• Model No. PCM1300
• List Price £499.95
• Petrol powered pressure washer
with recoil starting.
• Self priming pump makes this
unit fully portable for reservoir
pick-up, so can be used where
no mains pressure is available.
• 5mtr Pressure hose, 1mtr gun and
lance and four interchangeable
nozzles.
• Low-pressure liquid detergent
injection system.
• Safety latch on trigger and automatic
low-oil engine shutdown.
• Output Pressure/Flow:
2500psi/600ltr/hr.
• Model No. PCM2500SP
• List Price £1099.95
OFFER PRICE
£289.95
£347.94
Save
39%
OFFER PRICE
£269.95
£323.94
exc VAT
inc VAT
OFFER PRICE
exc VAT
inc VAT
Promotion Code GWE11
Save
42%
£679.95
£815.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Save
38%
27
3-Way Fill Pistol Type Grease Gun
3-Way Fill Heavy-Duty Side Lever
Grease Gun
• Air bleed facility.
• Accepts standard
400g cartridges.
• Supplied with rigid
extension tube and push-on
hydraulic 4-jaw coupling.
• Ideal for the busy automotive,
agricultural or industrial workshop.
• Model No. AK44
• List Price £26.95
• Pistol style gun with
contoured pump handle.
• Die-cast pump head with
air-bleed valve.
• Rigid extension tube and
push-on hydraulic 4-jaw coupling.
• Accepts standard 400g cartridges.
• Optional 300mm Flexible Extension Model No. AK44/FT
• Model No. AK446
• List Price £24.95
OFFER PRICE
Save
44%
3-Way Fill Heavy-Duty Twin Piston
Grease Gun
£13.95
£16.74
• Dual piston design
for high volume
performance.
• 3-Way fill with cartridge,
bulk or manual capability.
• Features variable stroke for
controlled grease volume.
• Half stroke gives low pressure and
low volume, full stroke provides high
pressure and high volume delivery.
• Accepts standard 400g cartridges.
• Model No. AK4402
• List Price £37.95
OFFER PRICE
£14.95
£17.94
exc VAT
Save
inc VAT
45%
12V Cordless Grease Gun
exc VAT
inc VAT
OFFER PRICE
12.5kg Extra Heavy-Duty
Chassis Lube
Filler Pump
£21.95
£26.34
Save
42%
exc VAT
inc VAT
7.6ltr Oil/Fluid
Drain Pan
• Made from
high density
Polyethylene
with UV stabilisers.
• Pouring spout aids return of
oil/fluid to recycling container.
• Model No. DRP02
• List Price £17.95
• Cordless grease
gun, developing
6000psi, to simplify
and speed-up manual
greasing.
• Suitable for 400g cartridges,
manual or bulk filling.
• Features LCD battery condition
indicator.
• Supplied with 12V 1.7Ah battery,
mains charger and in-car adaptor.
• Model No. CPG12V
• List Price £174.95
FREE
•
•
•
•
•
•
OFFER PRICE
Save
31%
Works on the high volume, low pressure process.
Designed for use on chassis.
Central lube coupling with spare plug-in adaptor.
Grease bucket not included.
Model No. AK456
List Price £179.95
£124.95
£149.94
Save
inc VAT
31%
inc VAT
exc VAT
inc VAT
Save
25%
OFFER PRICE
£44.95
£53.94
exc VAT
inc VAT
Save up to
• Manufactured from 0.9mm pickled steel sheet with fuel resistant lining.
• Lined inner tank to prevent rusting with petrol, diesel,
oil, water or alcohol.
• The bayonet is additionally secured with a locking
pin to prevent accidental opening.
• Manufactured and tested to comply with UN
Dangerous Goods, DIN and TUV/GS standards.
30%
Model No
OFFER PRICE
exc VAT
inc VAT
Colour
List
Price
OFFER PRICE
exc VAT
inc VAT
Model No
Diameter
List
Price
JC5MR
Red
£29.95
£17.95
£21.54
F4
185mm
£3.95
£2.75
£3.30
JC5MG
Green
£29.95
£17.95
£21.54
F5
250mm
£5.95
£4.25
£5.10
JC5MB
Black
£29.95
£17.95
£21.54
Translucent Measuring Jugs
Save
40%
Metal Drain Pans
(DRPM1
Illustrated)
• Zinc plated pan, ideal for oil
changes, cleaning and storing
vehicle components.
• May also be used as a drip
tray under vehicles.
• Translucent polypropylene.
• Easy to read scale for
accurate measurement
(±1%).
28
exc VAT
5ltr Jerry Cans
• Polyethylene funnel resistant to
oil, fuel and some acids.
• Features a rigid straight spout
and an integral side hook for
hanging.
29%
£13.45
£16.14
• Hard wearing
polycarbonate
material
preventing
corrosion.
• Fits to top of drum
for draining unused oil
back into drum.
• Model No. DRP19
• List Price £59.95
OFFER PRICE
exc VAT
Large Funnels
Save up to
OFFER PRICE
205ltr Drum
Drain Pan
Second Battery
• Model No.
CPG12VBP
• List Price
£39.95
£119.95
£143.94
Save
25%
Save up to
31%
OFFER PRICE
exc VAT
inc VAT
Model No
Capacity
Overall Size (W x D x H)
List Price
DRPM1
9ltr
432 x 331 x 89mm
£17.95
£12.45
£14.94
£5.94
DRPM2
12ltr
489 x 371 x 91mm
£19.95
£13.95
£16.74
£7.25
£8.70
DRPM3
16ltr
432 x 331 x 143mm
£21.95
£15.45
£18.54
£11.25
£13.50
DRPM4
20ltr
489 x 371 x 153mm
£23.95
£16.95
£20.34
Model No
Capacity
List
Price
OFFER PRICE
exc VAT
inc VAT
JT1000
1ltr
£6.95
£4.95
JT2000
2ltr
£9.95
JT5000
5ltr
£15.95
Prices exclude VAT unless stated otherwise
Promotion Code GWE11
5.5ltr Manual Vacuum
Oil & Fluid Extractor
•
•
•
•
•
•
•
•
•
9ltr Air Operated Vacuum
Oil & Fluid Extractor
5.5ltr Capacity.
Ingenious vacuum device.
Ideal for other liquids such as water.
To remove oil from a car engine,
simply push the probe down the
dip-stick tube and pump the handle
on the top of the unit.
Allows other work to be undertaken
whilst suction removes fluid.
Avoids searching for
drain plug keys and
getting under the
vehicle.
Ideal for mobile
mechanics.
Model No. TP696
List Price £59.95
OFFER PRICE
£39.95
£47.94
Save
33%
exc VAT
• Heavy-duty cast
steel body suitable
for use with low viscosity
products such as oils,
diesel, antifreeze and
other non-corrosive fluids.
• Supplied with 2"BSP
adaptor and 3pc dip tube
suitable for use on 205ltr
drums.
• Delivery approximately 1ltr
per revolution, emptying
OFFER PRICE
205ltr drum in 3 minutes.
• Model No. TP6807
• List Price £189.95
£119.95
£143.94
• Steel barrelled, self priming
lever pump.
• Supplied with 2"BSP adaptor
and dip-tube suitable for 25 to
205ltr drums.
• Suitable for oils, antifreeze, degreasants
and other non-corrosive fluids.
• Delivers approximately 300ml per stroke.
• Model No. TP68
OFFER PRICE
• List Price £32.95
• 9ltr Capacity device
constructed from
composite materials.
• Uses compressed air
supply to generate vacuum.
• Suitable for the extraction
of all types of engine,
transmission and lubricating
oils from cars, motorcycles,
marine engines, stationary
engines and industrial
machinery.
• Suitable also for low
viscosity fluids such as
water.
• Supplied with Ø6 and
Ø10mm suction probes and
1100mm brake/clutch
bleeding hose.
• Uses probes to extract
engine oil through the
dipstick tube.
OFFER PRICE
• Model No. TP6903
• List Price £124.95
• Cast steel body, suitable for oils,
antifreeze, degreasants and
other non-corrosive fluids.
• Supplied with 2"BSP adaptor
and is suitable for use on
205ltr drums.
• Delivers approximately
0.3ltr/revolution.
• Model No. TP54
OFFER PRICE
• List Price £35.95
Save
Save
36%
exc VAT
inc VAT
65ltr Air
Discharge
Waste Oil
Drainer
inc VAT
exc VAT
inc VAT
35ltr Air Discharge
Mobile Oil Drainer
with Probes
• Steel fabricated
35ltr reservoir.
• Height adjustable
steel drain pan, fitted
with grid filter.
• Features gravity
feed reservoir with
air discharge hose.
• Includes
quick-release oil
dipstick probes,
powered by
venturi suction
pump.
• Model No.
AK456DX
• List Price £349.95
6pc Double End
Drain Key Set
• Model No. AK658
• List Price
£28.95
37%
OFFER PRICE
inc VAT
£25.95
£31.14
28%
FREE
exc VAT
exc VAT
Rotary Oil Drum Pump
0.3ltr/Revolution
• Steel fabricated 65ltr
reservoir and telescopic
steel drain pan fitted
with grid filter.
• Air discharge drain
with hose.
• Fitted with reservoir oil
level indicator tube.
• Min./Max. Pan Height:
1070/1590mm.
• Model No. AK451DX
• List Price £369.95
Save
£25.95
£31.14
Save
21%
£79.95
£95.94
inc VAT
NEW
High Flow Heavy-Duty
Rotary Oil Pump
Heavy-Duty Lever Pump
£189.95
£227.94
OFFER PRICE
£199.95
£239.94
exc VAT
inc VAT
Polyethylene Barrel Bunds
Save
Save
49%
43%
exc VAT
inc VAT
Spill Trays
(DRP30 Illustrated)
• Complies with The
Control of Pollution
Oil Storage
Regulations 2001.
• These state that any
container, tank or drum
over 200ltr capacity
(with exceptions) must
be bunded.
• This bund must take
(DRP17 Illustrated)
at least 110%
capacity of the oil
storage container.
• Manufactured from
polyethylene making the
bunds ideal for storing
aggressive chemicals.
• Feature 250ltr spill
tray, compatible with
most forklifts and
pallet trucks.
• Lightweight for easy
transportation and
positioning, yet still
(DRP18 Illustrated)
strong and durable.
• Manufactured from high density polyethylene,
making the spill tray ideal for catching and
preventing oil and chemical spillages.
• 30ltr or 60ltr Tray capacity.
• Lightweight for easy transportation and positioning.
Save up to
38%
OFFER PRICE
exc VAT
inc VAT
(DRP33 Illustrated)
Save up to
26%
Model No
Dimensions (L x W x H)
Drum Capacity
With
Platform
DRP30
800 x 400 x 165mm
2 x 25ltr
No
£35.95
£26.95
£32.34
DRP31
800 x 400 x 165mm
2 x 25ltr
Yes
£71.95
£54.95
£65.94
List Price
OFFER PRICE
exc VAT
inc VAT
Model No
Drum Capacity
Dimensions (L x W x H)
List Price
DRP17
2 x 205ltr
1300 x 750 x 440mm
£289.95
£179.95
£215.94
DRP32
1000 x 600 x 175mm
4 x 25ltr
No
£66.95
£49.95
£59.94
DRP18
4 x 205ltr
1380 x 1290 x 280mm
£349.95
£219.95
£263.94
DRP33
1000 x 600 x 175mm
6 x 25ltr
Yes
£114.95
£84.95
£101.94
Promotion Code GWE11
Prices exclude VAT unless stated otherwise
29
Stair Climbing Sack
Truck 150kg Capacity
Sack Truck with
Pneumatic Tyres
300kg Capacity
• Ø165mm Solid tyres.
• Tubular steel construction gives
150kg maximum load capacity.
• Deep foot ensures cartons stay
on trolley during transit.
• Fitted with solid rubber wheels.
• Handle design allows a firm
grip whilst ascending and
descending stairways.
• Ideal for delivery drivers and couriers.
• Suitable also for multi-level factories
and offices.
• Model No. CST985
• List Price £79.95
• Strong tubular steel frame.
• Steel centred pneumatic
wheels for easy transport
over rough terrain.
• Load protection rails to
prevent damage.
• Features P-handle design
to improve flat loading
and enables one-handed
operation.
• Model No. CST998
• List Price £74.95
OFFER PRICE
£55.95
£67.14
3-in-1 Sack Truck with 250 x 90mm
Pneumatic Tyres 250kg Capacity
• Ø250mm
Pneumatic
tyres.
• Tubular steel
framework
with
heavy-duty
pneumatic
tyres allows
transport
of load over
rough
terrain.
• Suitable for use
as a traditional
sack truck or at 45°
with support castors
in position.
• Features fold out load
restrainer for use when
truck is in horizontal
position.
• Model No. CST989
• List Price £114.95
OFFER PRICE
£52.95
£63.54
exc VAT
inc VAT
Save
30%
205ltr Drum Dolly
exc VAT
inc VAT
Save
OFFER PRICE
£79.95
£95.94
Save
29%
30%
Drum & Barrel Trolley
• Rigid steel construction suitable for
safe movement and storage of steel
and plastic barrels.
• Cradle fitted with two, smooth rolling,
heavy-duty, Ø150mm wheels and
one Ø75mm castor wheel.
• Two-position handle locks upright or
at 45° and features tools for five
different drum caps and a metal
drum tilting attachment.
• Model No. TP13
• List Price £119.95
• Lifts open or closed, loaded,
steel drums with the aid of an
overhead hoist.
• Keeps drum in vertical position
reducing spillage.
• Heavy-duty steel construction.
• Suitable for 205ltr drums.
• Model No. DG01
• List Price £73.95
Save
Save
20%
27%
OFFER PRICE
OFFER PRICE
exc VAT
inc VAT
Platform Truck
300kg Capacity
Save
29%
£84.95
£101.94
OFFER PRICE
inc VAT
Save
30%
30
exc VAT
inc VAT
exc VAT
inc VAT
Pallet Trucks
• Heavy-duty truck suitable for warehouse
and general handling duties.
• Features polyurethane, non-marking wheels
with sealed for life bearings all-around.
• Hydraulic unit with chromed ram piston
for resistance to corrosion.
• Single loading rollers with drop nose for
smooth pallet entry.
• 220mm Between forks.
• Suitable for warehouse and general
handling duties.
• Polyurethane, non-marking wheels and
tandem loading rollers with sealed-for-life
bearings all-round.
• Hydraulic unit with chromed ram and piston
for resistance to corrosion.
• Model No. PT1150LD
• List Price £339.95
£69.95
£83.94
£53.95
£64.74
exc VAT
Pallet Truck - 1680kg Capacity
1150 x 520mm
• Rigid platform truck features rubberised deck and
bumper strip.
• Platform Size: 910 x 605mm.
• Handles fold flat for ease of storage.
• Suitable for a variety of warehouse, office and
domestic applications.
• Model No. CST992
OFFER PRICE
• List Price £99.95
inc VAT
350kg Drum
Grab
• Transport drums quickly and safely on large diameter
castor wheels.
• Wheels are strategically positioned for even weight
distribution enabling easier manoeuvrability.
• Suitable for 205ltr drums.
• Model No. TP205
• List Price £74.95
£59.95
£71.94
exc VAT
ustrated)
(PT1150 Ill
Save
Save up to
26%
OFFER PRICE
£249.95
£299.94
30%
Model No
Fork Forks (Length x
OFFER PRICE
List Price
Spread Overall Width)
exc VAT
inc VAT
exc VAT
PT1150
230mm
1150 x 550mm
£399.95
£289.95 £347.94
inc VAT
PT1220
365mm
1220 x 685mm
£429.95
£299.95 £359.94
Prices exclude VAT unless stated otherwise
Promotion Code GWE11
Chain Blocks
Beam Clamps
•
•
•
Suitable for semi-permanent
attachment to steel beams
and acts as a lifting point
for chain blocks, hoists
and lifting tackle.
The clamp may also be used
for lifting and transfer of steel
beams and as a pulling
clamp.
Low profile afforded by
integral pivot/lifting point.
•
•
•
•
43%
Save up to
44%
•
•
•
Capacity
Standard Lift
CB500
0.5tonne
2.5mtr
£119.95
£69.95
OFFER PRICE
exc VAT
inc VAT
CB1000
1tonne
2.5mtr
£129.95
£79.95
£95.94
BC1000
1tonne
75-220mm
£69.95
£39.95
£47.94
CB2000
2tonne
3mtr
£199.95
£119.95
£143.94
BC2000
2tonne
75-220mm
£79.95
£44.95
£53.94
CB3000
3tonne
3mtr
£279.95
£179.95
£215.94
BC3000
3tonne
80-320mm
£109.95
£69.95
£83.94
CB5000
5tonne
3mtr
£399.95
£229.95
£275.94
Lever Hoists
Lightweight and compact
design for easy use in confined
conditions.
Features drop-forged and heat
treated pinion gear with totally
enclosed mechanism.
Hooks fitted with safety latches
and rotate 360°.
Free-chaining feature permits
slack in the load chain to be
taken up by hand before
engaging the ratchet arm.
Model No. LH251
List Price £89.95
•
•
(LH3000
Illustrated)
Save up to
Model No
Capacity List Price
OFFER PRICE
exc VAT
inc VAT
LH750
750kg
£149.95
£89.95
£107.94
LH1000
1000kg
£179.95
£109.95
£131.94
exc VAT
LH1500
1500kg
£199.95
£129.95
£155.94
inc VAT
LH3000
3000kg
£279.95
£179.95
£215.94
Load Sling Adjuster
500kg Capacity
540kg Enclosed
Geared Winch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Welded steel chain suitable for use
with any engine crane.
Self-securing locking link allows correct
balance of load up to 500kg.
Secure to engine with fixing plates
which are included.
Model No. ECS500
List Price £39.95
40%
OFFER PRICE
£59.95
£71.94
Handles and levels
heavy, off-centre,
loads quickly and
easily.
Ideal for car, van,
truck and marine
engines.
500kg Capacity.
If used with cranes
of 500kg or more
capacity the load
must be restricted
to 500kg maximum.
Model No. LS500
List Price £49.95
Save
50%
OFFER PRICE
£19.95
£23.94
exc VAT
inc VAT
Heavy plate chassis.
Enclosed gears.
Capacity: 540kg.
Handle Length: 240mm.
Hub Diameter: 33mm.
Model No. GWE1200
List Price £55.95
OFFER PRICE
Save
30%
£34.95
£41.94
OFFER PRICE
exc VAT
•
•
•
•
•
•
•
Save
inc VAT
250kg Capacity Power Hoist 230V/1ph
29%
Approved to EU and UK Lifting Gear
Regulations.
This hoist is intended for use where a
suitable support facility exists.
Support brackets are included with the
equipment.
Maximum Capacity
(Double Cable):
250kg.
The support bar is
not included.
Model No. PH250
List Price £159.95
Save
31%
£39.95
£47.94
exc VAT
inc VAT
400kg Capacity Power Hoist 230V/1ph
•
•
•
•
•
•
•
Approved to EU and UK Lifting Gear
Regulations.
This hoist is intended for use where a
suitable support facility exists.
Support brackets are included with the
equipment.
Maximum Capacity
(Double Cable):
400kg.
The support bar is
not included.
Model No. PH400
List Price £209.95
OFFER PRICE
Promotion Code GWE11
£83.94
Engine Chain Sling
500kg Capacity
Rugged construction features drop-forged and
heat treated pinion gear with totally enclosed
mechanisms.
Equipped with heavy-duty brake and high quality
alloy steel chain for durable and safe operation.
Free-chaining feature permits slack in the load
chain to be taken up by hand before engaging
the ratchet arm.
•
33%
•
•
OFFER PRICE
exc VAT
inc VAT
List
Price
Save
•
List Price
Adjustable Beam
Width
250kg Mini Lever Hoist
•
Model No
Capacity
Model No
•
(CB5000
Illustrated)
Save up to
(BC3000
Illustrated)
•
Fitted with heat treated and ground, triple-spur geared shaft
and pinion.
Includes mechanical load brake for extra safety.
All chains are manufactured from hardened alloy material and
load hooks feature safety latches.
Compact gear housing allows use where headroom is limited.
£109.95
£131.94
OFFER PRICE
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Save
33%
£139.95
£167.94
exc VAT
inc VAT
31
5 Shelf Racking Unit 340kg Capacity Per Level
5 Shelf Racking Unit 220kg Capacity Per Level
• Fully painted steel frame with
five chipboard shelves.
• Z Shape beams offer 340kg
capacity per level giving a
maximum capacity of
1700kg per rack.
• Boltless design means no
tools required to assemble.
• Slots together in minutes.
• Two piece uprights allow use
as a single bay rack or split
into two separate shelf
systems or workstations.
• Overall Size (W x D x H):
915 x 460 x 1830mm
• Model No. AP900R
• List Price £99.95
• Fully painted steel frame
with five chipboard shelves.
• Z Shape beams offer 220kg
capacity per level giving a
maximum capacity of 1100kg
per rack.
• Boltless design means no
tools required to assemble.
• Slots together in minutes.
• Two piece uprights allow
use as a single bay rack
or split into two separate
shelf systems or workstations.
• Overall Size (W x D x H):
1200 x 460 x 1830mm
• Model No. AP1200R
• List Price £129.95
OFFER PRICE
£69.95
£83.94
OFFER PRICE
£89.95
£107.94
exc VAT
inc VAT
Save
30%
5 Shelf Racking Unit 600kg Capacity Per Level
exc VAT
inc VAT
Save
31%
Heavy-Duty Racking Unit with 4 Mesh Shelves
800kg Capacity Per Level
• Fully painted steel frame
with five MDF shelves.
• Z Shape beams offer
added strength.
• 600kg Capacity per level
gives a maximum capacity
of 3000kg per rack.
• Boltless design means no
tools required to assemble.
• Clips together in minutes.
• Use as a single bay full
height rack or split into two
separate half height storage
stations.
• Overall Size (W x D x H):
1216 x 460 x 1828mm.
• Model No. AP6548
• List Price £149.95
• Fully painted steel frame
with four heavy-duty wire
mesh shelves.
• Industrial structured beams
offer added strength.
• 800kg Capacity per
level gives a maximum
capacity of 3200kg
per rack.
• Boltless design means
no tools required to
assemble.
• Clips together in minutes.
• Suitable storage solution
for workshop, bodyshop,
warehouse and
agricultural environments.
• Overall Size (W x D x H):
1830 x 600 x 1828mm.
• Model No. AP6572
• List Price £299.95
Save
27%
OFFER PRICE
£109.95
£131.94
Heavy-Duty Racking
Extension Pack with 4 Mesh
Shelves 800kg Capacity Per Level
OFFER PRICE
£219.95
£263.94
exc VAT
inc VAT
Save
27%
exc VAT
•
•
inc VAT
Model No. AP6572E
List Price
Save
£269.95
26%
OFFER PRICE
£199.95
£239.94
Shelving Unit with 3 Beam Sets 900kg Capacity Per Level
Racking Unit with 3 Beam Sets 1000kg Capacity Per Level
• Designed to meet the
requirements of the most
demanding professionals.
• This shelving/racking system
is especially suited for storage
solutions in the workshop,
bodyshop, warehouse and
agricultural environments.
• Shelving unit with upright
frames and cross beams.
• 900kg Capacity per level.
• Size (W x D x H):
1250 x 600 x 2000mm.
• Optional Safety Locking
Pins - Pack of 12.
Order Model No. APR/SL12.
• Optional Chipboard Panel
Supports. Order Model No.
APR/CPS601.
• Model No. AP2700
• List Price £259.95
• This shelving/racking system is especially
suited for storage solutions in the workshop,
bodyshop, warehouse and agricultural
environments.
• Racking unit with
upright frames
and cross beams.
• 1000kg Capacity
per level.
• Overall Size (W x D x H):
2350 x 1000 x 2000mm.
• Optional Safety Locking
Pins - Pack of 12. Order
Model No. APR/SL12.
• Optional Chipboard
Panel Supports.
Order Model No.
APR/CPS1001.
• Display material not
included.
• Model No. AP3000
• List Price £449.95
OFFER PRICE
£169.95
£203.94
32
exc VAT
inc VAT
OFFER PRICE
exc VAT
inc VAT
Save
35%
£299.95
£359.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Save
33%
Promotion Code GWE11
Workshop Trolleys
Extra Heavy-Duty Trolleys
strated)
(CX108 Illu
(CX103
d)
Illustrate
(CX203
ble
Availa ly
Ju
end of
• Ideal for storage
of regularly used
workshop items
such as body kits.
• Strong build quality
makes an excellent
dismantler’s trolley
for smaller engine
components.
• Ideal for storing
welding
accessories
and tools.
• Size (W x D x H):
890 x 420 x 895mm.
(CX105
)
Illustrated
(CX102
d)
Illustrate
Save up to
35%
OFFER PRICE
exc VAT
inc VAT
NEW
Composite Heavy-Duty
Trolleys
• Deep-walled
shelves, which
may be installed
base down or
base up to give either tool and
component security or unobstructed access.
• Four large castors, two fitted with a brake.
• Size (W x D x H): 760 x 410 x 900mm.
Save up to
36%
d)
• Manufactured
from extra-strong
impact resistant
(CX202
plastic.
Illustrated)
• Ideal for a wide
variety of
applications.
• Features deep
wall shelves
and tool storage
compartments
built into the
contoured handle.
• Fitted with four large rubber wheels,
two fixed and two locking castors.
• Size (W x D x H): 1000 x 440 x 850mm.
Save up to
33%
Model No
Capacity
List
Price
Model No
Capacity
List
Price
Model No
Capacity
List
Price
CX105
100kg (50kg/Level)
£82.45
£54.95
£65.94
CX102
160kg (80kg/Level)
£89.95
£59.95
£71.94
CX202
226kg (113kg/Level)
£139.95
£94.95
£113.94
CX108
150kg (50kg/Level)
£99.95
£64.95
£77.94
CX103
165kg (55kg/Level)
£109.95
£69.95
£83.94
CX203
249kg (83kg/Level)
£179.95
£119.95
£143.94
1.5mtr Steel Workbench with 1 Drawer
• Supplied with a single,
lockable drawer and
drawer runners both
sides of centre.
• Manufactured throughout
from steel plate for
industrial durability.
• Finished in red gloss to
prevent corrosion.
• Includes bottom shelf
for additional storage.
• Size (W x D x H):
1500 x 650 x 860mm.
• Model No. AP1015
• List Price £379.95
OFFER PRICE
exc VAT
inc VAT
Illustrate
OFFER PRICE
exc VAT
inc VAT
Heavy-Duty Workbench with 5 Drawers
• Powder coated steel panels
with 40mm wood laminate top.
• Features 5 smooth running
tool drawers and open
shelving for storage of
larger items.
• Table Size (W x D):
1372 x 508mm.
• Working Height: 865mm.
Save up to
39%
OFFER PRICE
£229.95
£275.94
inc VAT
Save
39%
1.3mtr Folding Steel Workbench
• Unique folding workbench saves
garage/workshop space when not in use.
• 665mm Deep worktop, easily folds down
to just 100mm (excluding legs).
• Fitted with gas struts to aid raising
and lowering.
• Adjustable steel feet for
added stability.
• Maximum Capacity: 250kg
evenly distributed across surface.
• Perforated back panel supplied
with hooks for hanging tools,
enabling workbench to be kept
clear for the job at hand.
• Model No. AP1330
• List Price £349.95
OFFER PRICE
£199.95
£239.94
Ball Bearing
Drawer Runners
Capacity
List Price
AP2030
250kg
£389.95
£239.95
£287.94
AP2030BB
250kg
£439.95
£269.95
£323.94
Model No
exc VAT
OFFER PRICE
exc VAT
inc VAT
Mobile Steel Workbench with Hardwood Top
• Provides much more
than a lockable rollcab
yet offers as much tool
storage.
• Wooden worktop will
accept a heavy-duty
vice and the six
drawers are lockable.
• Size (W x D x H):
1070 x 595 x 920mm.
• Model No. AP1000M
• List Price £969.95
Save
48%
OFFER PRICE
exc VAT
inc VAT
Promotion Code GWE11
Save
43%
£499.95
£599.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
33
Key Cabinets
• Fitted with high quality cylinder type lock and supplied
with two keys.
• Piano hinged door with catch plate gives added security.
• Supplied with a pack of colour coded key tags.
• Includes mounting screws and wall plugs.
Save up to
• High quality cylinder type lock with tumbler
security system.
• Piano hinged door with catch plate gives
added security.
• Supplied with number tags.
• Colour coded key tags not included.
• Includes mounting screws and wall plugs.
Key
Model No
Capacity
Key
Model No
Capacity
45%
Size
OFFER PRICE
List Price
exc VAT inc VAT
Save up to
48%
OFFER PRICE
List Price
exc VAT inc VAT
Size
(SKC100 Illustrated)
(SKC857 Illustrated)
Tumbler Lock Key Cabinets
(SKC93 Illustrated)
Key Cabinets
• Fitted with high quality cylinder type lock and
supplied with two keys.
• Numbered, colour coded hook bars are adjustable to
suit varying key sizes.
• Supplied with index card for easy key location.
Save
40%
• Includes mounting screws and wall plugs.
Model No
Key
Capacity
Size
List Price
OFFER PRICE
exc VAT inc VAT
SKC20
20
160x80x200mm
£16.95
£9.45
£11.34
SKC820
20
160x80x200mm
£17.95
£9.95
£11.94
SKC50
50
375x80x550mm
£62.95
£37.95 £45.54
SKC45
45
240x80x300mm
£28.95
£15.95
£19.14
SKC836
36
240x80x300mm
£25.95
£13.45
£16.14
SKC100
100
375x80x550mm
£72.95
£43.95 £52.74
SKC93
93
240x80x300mm
£34.95
£19.95
£23.94
SKC857
57
280x80x370mm
£33.95
£18.95
£22.74
SKC100D
100
375x140x550mm
£99.95
£59.95 £71.94
Heavy-Duty Aluminium
Tool Case
• Reinforced panels and foam inner
lining ensure contents are kept safe.
• Includes internal movable dividers
allowing case to be used for many
applications.
• Tool storage pallet ensures no space is
Save
wasted and can be detached if required.
40%
• Two tough lockable catches for added security.
• Supplied with two keys.
OFFER PRICE
• Size (W x D x H):
455 x 330 x 150mm.
exc VAT
• Model No. AP610
• List Price £49.95
£29.95
£35.94
inc VAT
ABS Tool Case
Aluminium Tool Case - Radiused Edges
Aluminium Pilot Style Tool Case
Fully Polished
• Perfect for the mobile technician.
• Supplied with a tool storage pallet
and case dividers plus a set
of two keys.
• Size: 450 x 330 x 150mm.
• Model No. AP601
• List Price £49.95
• Tough and smart aluminium
tool case.
• Fitted with business card and
pen holder.
• Size (W x D x H): 465 x 210 x 350mm.
• Model No. AP605
• List Price £89.95
OFFER PRICE
Save
40%
£29.95
£35.94
OFFER PRICE
£49.95
£59.94
exc VAT
Save
inc VAT
585mm 3 Drawer Portable Toolbox
44%
exc VAT
inc VAT
Cabinet Boxes
• Tough and durable
carcass, contains
impact resistant
composite drawers.
• Ideal for storing a
mixture of small to
large fixings and
components.
• Fitted with four fixing
points for wall
mounting.
ted)
lustra
C41 Il
(APD
• ABS shell will not dent or bend.
• Interior includes removable tool
storage pallet and internal dividers.
• Locking catches provide added
security.
• Supplied with two keys.
• Size (W x D x H): 465 x 335 x 150mm.
• Model No. AP606
• List Price £64.95
OFFER PRICE
Save
38%
34
£39.95
£47.94
exc VAT
inc VAT
• Has the storage capacity of a tool chest coupled with the
versatility of a carry-type toolbox.
• Drawers are automatically locked, for transportation,
when lid is closed and feature sliding runners for long
life performance.
• Two tough metal locking clasps, both with padlock eye
for extra security.
• Overall Size (W x D x H):
585 x 250 x 340mm.
OFFER PRICE
• Model No. AP1003
• List Price £79.95
exc VAT
Save
38%
£49.95
£59.94
inc VAT
Prices exclude VAT unless stated otherwise
36%
No of
Drawers
List
Price
APDC41 300x140x485mm
41
£27.95
£17.95
£21.54
APDC42 375x160x440mm
42
£39.95
£26.95
£32.34
Model No
Overall Size
(W x D x H)
Save up to
d)
strate
42 Illu
(APDC
OFFER PRICE
exc VAT
inc VAT
Promotion Code GWE11
3 Drawer Portable Topchest
Red/Grey with FREE Tools
worth £107.60
®
Ball Bearing
Drawer Slides
• Storage capacity
of a tool chest
coupled with the
versatility of a
carry-type toolbox.
• Features two
strong locking
hasps which can
be locked using
a padlock
(not included).
• Overall Size
(W x D x H):
510 x 220 x 300mm.
• Medium Drawer (x3):
500 x 210 x 65mm.
• Model No.
AP9243BBCOMBO
• Total Package
List Price £197.55
exc VAT
inc VAT
Save
60%
6 Drawer Topchest Red/Grey with
FREE Tools worth £135.30
®
Save
65%
OFFER PRICE
£179.95
£215.94
exc VAT
inc VAT
14 Drawer Tool Chest
Combination - Red/Grey
with FREE Tools
worth £283.80
Save
OFFER PRICE
exc VAT
inc VAT
9 Drawer Topchest Red/Grey with
FREE Tools worth £173.50
®
Ball Bearing
Drawer Slides
Save
Promotion Code GWE11
Drawer Slides
Drawer Slides
60%
• Features drop down carry handles, smooth drawer slides,
cylinder lock and, for additional security, steel bars that can
be locked into place to keep drawers shut.
• Has built-in storage for locking bars when toolbox is in use.
• Overall Size (W x D x H): 600 x 260 x 380mm.
• Model No. AP22509BBCOMB
• Total Package List Price £353.45
Ball Bearing
Ball Bearing
• Six-drawer unit, perfect
as an intermediate
size locking chest.
• Overall Size
(W x D x H):
600 x 260 x 340mm.
• Small Split Drawer
(x3):
150 x 220 x 40mm.
• Small Drawer (x2):
510 x 220 x 40mm.
• Medium Drawer
(x1):
510 x 220 x 80mm.
• Model No.
AP2201BBCOMBO
• Total Package
List Price £275.25
£109.95
£131.94
®
• The economical
way to buy
American Pro®
quality toolboxes.
• Supplied packed
one inside the other.
• All steel construction
for strength and
durability.
• Ø75mm Swivel castors.
• Topchest Size
(W x D x H):
600 x 260 x 340mm,
Rollcab Size
(W x D x H):
610 x 330 x 730mm.
• Not interchangeable
with the rest of the
American Pro® Range.
• Model No.
AP2200BBCOMBO
• Total Package
List Price £509.10
OFFER PRICE
£79.95
£95.94
6 Drawer Tool Chest
Combination - Red/Grey
with FREE Tools
worth £261.15
63%
OFFER PRICE
£129.95
£155.94
®
Ball Bearing
Drawer Slides
• Features drop down
carry handles, smooth,
ball bearing, drawer
runners, cylinder
lock and for
additional
security, steel bars
that can be locked
into place to keep
drawers shut.
• Manufactured with double
skin side walls for extra
strength and finished in
smooth, hi-gloss,
triple baked enamel.
• Resists scratches,
oil, dirt and most
solvents.
• Supplied with tumbler
type security locks with
two numbered keys.
• The rollcab features
Ø125mm hard compound
rubber wheels with two
fixed and two locking,
castor brackets.
• Topchest Size (W x D x H):
600 x 260 x 380mm.
• Rollcab Size (W x D x H):
615 x 330 x 770mm.
• Model No.
AP2250BBCOMBO
• Total Package
List Price £713.70
Save
61%
OFFER PRICE
exc VAT
inc VAT
£279.95
£335.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
35
®
5 Drawer Topchest Black with
FREE Tools worth £450.30
®
10 Drawer Topchest Red with
FREE Tools worth £450.30
Ball Bearing
Ball Bearing
Drawer Slides
Drawer Slides
Also available in BLACK
Model No. AP33109BCOMBO
Also available in RED
Model No. AP33059COMBO
• All heavy gauged steel construction and manufactured
with steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball bearing drawer runners provide
superior performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length
drawers in multiple locations.
• Added security provided by tumbler lock, supplied
with two folding keys.
• Rust and solvent resistant powder coat paint finish.
• Each drawer features aluminium drawer pulls and
non-slip liners.
• Overall Size (W x D x H): 660 x 315 x 425mm.
• Model No. AP33059BCOMBO
Save
• Total Package List Price £740.25
OFFER PRICE
£239.95
£287.94
68%
exc VAT
inc VAT
• All heavy gauged steel construction and manufactured
with steel inner walls for extra strength and durability.
• Heavy-duty 45mm ball bearing drawer runners provide
superior performance and carry heavier loads.
• Full height rear locking mechanism, locks full-length
drawers in multiple locations.
• Added security provided by tumbler lock, supplied
with two folding keys.
• Rust and solvent resistant powder coat paint finish.
• Each drawer features aluminium drawer pulls and
non-slip liners.
• Overall Size (W x D x H): 660 x 315 x 485mm.
• Model No. AP33109COMBO
Save
• Total Package List Price £840.25
8 Drawer Topchest
& 7 Drawer Rollcab
Black with FREE Tools
worth £497.70
• All heavy gauged steel
construction and
manufactured with steel
inner walls for extra
strength and durability.
• Heavy-duty 45mm ball
bearing drawer runners
provide superior
performance and carry
heavier loads.
• Full height rear locking
mechanism, locks
full-length drawers in
multiple locations.
• Added security provided
by tumbler lock, supplied
with two folding keys.
• Rust and solvent resistant
powder coat paint finish.
• Each drawer features
aluminium drawer pulls
and non-slip liners.
• Rollcab includes four
Ø125mm rubber wheels,
two swivel castors with
large toe locks and two
fixed wheels.
• Features a high polished
chrome handle to enable
smooth manoeuvrability.
• Also includes a 10mm thick
top mat.
• Topchest Size (W x D x H):
660 x 315 x 425mm.
• Rollcab Size (W x D x H):
685 x 465 x 835mm.
• Model No.
APCOMBOBBTK55
• Total Package
List Price £1,277.60
• All heavy gauged steel
construction and
manufactured with steel
inner walls for extra
strength and durability.
• Heavy-duty 45mm ball
bearing drawer runners
provide superior
performance and carry
heavier loads.
• Full height rear locking
mechanism, locks
full-length drawers in
multiple locations.
• Added security provided
by tumbler lock, supplied
with two folding keys.
• Rust and solvent resistant
powder coat paint finish.
• Each drawer features
aluminium drawer pulls
and non-slip liners.
• Rollcab Includes four
Ø125mm rubber wheels,
two swivel castors with
large toe locks and two
fixed wheels.
• Features a high polished
chrome handle to enable
smooth manoeuvrability.
• Also includes a 10mm thick
top mat.
• Topchest Size (W x D x H):
660 x 315 x 430mm.
• Rollcab Size (W x D x H):
685 x 465 x 995mm.
• Model No
APCOMBOBBTK58
• Total Package
List Price £1,417.60
®
inc VAT
®
65%
Ball Bearing
OFFER PRICE
36
exc VAT
Save
65%
£449.95
£539.94
£299.95
£359.94
64%
5 Drawer Topchest
& 5 Drawer Rollcab
Red with FREE Tools
worth £497.70
Save
OFFER PRICE
exc VAT
inc VAT
Ball Bearing
OFFER PRICE
Drawer Slides
Also available in BLACK
Model No. APCOMBOBBTK56
£499.95
£599.94
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Drawer Slides
Also available in RED
Model No. APCOMBOBBTK57
Promotion Code GWE11
8 Drawer Topchest
& Rollcab Combination
with 962pc Tool Kit
• 4 Drawer Topchest.
• Overall Size (W x D x H): 690 x 465 x 400mm.
• Model No. AP2401 • List Price £349.95
• 4 Drawer Rollcab.
• Overall Size (W x D x H): 766 x 465 x 958mm.
• Model No. AP2405 • List Price £579.95
• Includes 16 Tool Trays.
• Package Model No. APTTC01
• Total Package List Price £2,033.10
Visit
www.sealey.co.uk
for full details
of the
tool trays.
OFFER PRICE
£599.95
£719.94
exc VAT
inc VAT
Save
70%
Waste Bin for AP24 Series
Tool Chests
Ball Bearing
Drawer Slides
• Easy fix waste bin, allowing work
area to be kept clean and tidy.
• Suitable for all AP24 Series tool
Save
31%
chests (except AP2401).
• Model No.
OFFER PRICE
AP24ACC4
exc VAT
• List Price
£31.95
inc VAT
£21.95
£26.34
14 Drawer
Tool Chest Combination
with 1179pc Tool Kit
Protective Cover for AP24 Series
Rollcabs + 4 Drawer Topchest
• Ideal for
protecting
rollcab and
topchest from
dust and dirt.
• Size
(W x D x H):
780 x 490
x 1216mm.
• Model No.
AP24ACC12
• List Price
£69.95
OFFER PRICE
£34.95
£41.94
exc VAT
inc VAT
Save
50%
X2
• 5 Drawer Topchest.
• Overall Size (W x D x H):
660 x 435 x 490mm.
• Model No. AP26059TB
• List Price £359.95
• 2 Drawer Add-On Chest.
• Overall Size (W x D x H):
670 x 440 x 210mm.
• Model No. AP26029TB
• List Price £169.95
• 7 Drawer Rollcab.
• Overall Size (W x D x H):
685 x 465 x 995mm.
• Model No. AP26479TB
• List Price £579.95
• Includes 27 Tool Trays.
• Package Model No. SPTCOMBO2
• Total Package List Price £3,351.00
OFFER PRICE
£1,149.95 exc VAT
£1,379.94 inc VAT
Save
66%
Visit
www.sealey.co.uk
for full details
of the tool trays.
Ball Bearing
Drawer Slides
®
Also available in Red
Model No. SPTCOMBO1
Promotion Code GWE11
Prices exclude VAT unless stated otherwise
37
Torque Wrenches Micrometer Style
3/4"Sq Drive Extendable Breaker Bar
700-1000mm
• Chrome Vanadium steel breaker bar.
• Hardened, tempered and finished in deep
polished high chrome.
• Features quick socket release and contoured
handle for added grip which extends
up to 1000mm.
• Model No. AK7317
• List Price £89.95
(STW
102
(STW
103
OFFER PRICE
Save
50%
£44.95
£53.94
exc VAT
inc VAT
• Chrome Vanadium steel ratchet wrench.
• Hardened, tempered and finished in
deep polished high chrome.
• Twist reverse and quick release.
• Contoured handle for added grip,
extends up to 1000mm.
• Model No. AK6693
• List Price £99.95
OFFER PRICE
£54.95
£65.94
exc VAT
inc VAT
Save
Save
44%
£119.95
£143.94
25pc Jumbo Combination
Spanner Set - Metric
exc VAT
inc VAT
iegen
tools
• Chrome Vanadium steel.
• Contents: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32mm.
• Manufactured to German DIN standards.
• Model No. S0401
• List Price £94.95
OFFER PRICE
Save
47%
38
£49.95
£59.94
ated
)
Drive
1/2"Sq
£84.95
£39.95
£47.94
STW103
70-420Nm/52-310lb.ft
3/4"Sq
£179.95
£89.95
£107.94
List Price
3/4"Sq Drive Ratchet Adaptor
• Ratchet adaptor capable of
transmitting torque of up to 1412Nm.
• Three-position control ring gives
anticlockwise ratchet, clockwise
ratchet and locked.
• 24-Tooth ratchet needs only 15°
rotation to engage the next tooth advantageous when using long bars.
• Model No. AK7371
• List Price £49.95
OFFER PRICE
Save
Save
44%
exc VAT
inc VAT
exc VAT
• WallDrive® sockets grip the flats of the fixing, giving
maximum torque transfer.
• Flip reverse ratchet with quick release.
• Contents: 1"Sq Drive WallDrive® Sockets; 36, 38, 41, 46,
50, 54, 55, 58, 60, 63, 65, 67, 70, 71, 75, 77,
Save
80mm. Extension Bars; 200, 400mm.
42%
Universal Handle, Sliding Head, 1"Sq Drive
Flip Reverse Quick
OFFER PRICE
Release Ratchet Head.
• Model No. AK261
exc VAT
• List Price £649.95
inc VAT
inc VAT
iegen
£99.95
£119.94
£379.95
£455.94
4pc Heavy-Duty Prybar Set
tools
• Drop-forged steel spanners.
• Hardened, tempered and chrome plated with fully
polished jaws and bi-hex ring.
• Sizes: 33-50mm.
• Model No. S0751
OFFER PRICE
• List Price £179.95
exc VAT
inc VAT
£119.95
£143.94
6pc Super Jumbo
Combination Spanner Set
Metric
£29.95
£35.94
22pc 1"Sq Drive Socket Set - Metric
• Manufactured from heat treated drop-forged Chrome
Vanadium steel, fully polished for corrosion resistance.
• Metric: 22-46mm.
• Imperial: 15/16"-1-3/4".
• Model No. AK2582
OFFER PRICE
• List Price £239.95
50%
53%
OFFER PRICE
exc VAT
inc VAT
Range
26pc 3/4"Sq Drive Socket Set
12pt WallDrive® - DuoMetric®
Save
Save up to
40-210Nm/30-155lb.ft
40%
• Specially selected using the DuoMetric® principle allowing
total size coverage with minimum number of sockets.
• Sockets are manufactured from Chrome Molybdenum
steel with manganese phosphate finish for added
corrosion resistance.
• Size Coverage: 22, 24, 27, 30, 32, 33, 34, 36, 38mm,
7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16",
1-3/8", 1-7/16", 1-1/2".
• Model No. AK687
OFFER PRICE
• List Price £214.95
)
STW102
45%
13pc 3/4"Sq Drive Impact Socket Set
Deep - Metric/Imperial
ated
• Chrome Vanadium steel
ratchet head with smooth action mechanism.
• Calibration tolerance in accordance with
BS EN ISO 6789:2003.
• Tested to standards with ±4% accuracy and each wrench
is issued with an individually numbered test certificate.
Model No
3/4"Sq Drive Extendable Ratchet Wrench
700-1000mm
Illustr
Illustr
•
•
•
•
•
•
Heavy-duty, angled shafts.
Chrome Molybdenum steel with blackened finish.
Textured comfort grip handles with hammer cap.
Contents: 200, 300, 460, 610mm.
Model No. AK9105
List Price £43.95
OFFER PRICE
exc VAT
inc VAT
Prices exclude VAT unless stated otherwise
Save
43%
£24.95
£29.94
exc VAT
inc VAT
Promotion Code GWE11
STOCK CLEARANCE - When It’s Gone, It’s Gone!
Super Torque Cordless Hammer
Drill/Drivers 1hr Charge
2 Batteries
12mtr Retractable Air Hose Reel
HD Mechanism Ø6mm ID
Polyurethane Hose
• Reduces the number
of trailing air lines in
the workshop and
demonstrates a
professional
approach to safety.
• 6mm Bore x 12mtr
hose with 1/4"BSP
inlet/outlet.
• Supplied with
wall/ceiling
mounting bracket.
• Model No. SA892
• List Price £159.95
• Electronic variable speed in
forward/reverse and brake
give complete control over workpiece.
• Wide range of torque settings over two
mechanical speeds including hammer action.
• Built-in spirit level allows for accurate drilling.
• Auxiliary handle with internal storage
for supplied 9pc bit set.
OFFER PRICE
Save
38%
£99.95
£119.94
exc VAT
inc VAT
Model No
170mm Heavy-Duty 6-Speed
Sander/Polisher 1300W
• Powerful polisher with variable speed adjustment.
• Ideal for polishing and sanding.
• The electric motor on this
tool has delivered up to
9.5Amps under
load testing.
• Model No.
MS700PS
• List Price
£339.95
Save up to
(CP3018VHK
Illustrated)
41%
OFFER PRICE
exc VAT
inc VAT
Battery Type:
Maximum Torque:
List Price
CP3018VHK
18V - 1.7Ah
30Nm
£239.95
£149.95
£179.94
CP3024VHK
24V - 1.7Ah
36Nm
£289.95
£169.95
£203.94
6Amp 12/24V Professional Electronic
Battery Charger
OFFER PRICE
Save
47%
£179.95
£215.94
exc VAT
inc VAT
• 12/24Volt output.
• Suitable for lead acid (wet or gel) or
low maintenance batteries, this charger
reacts continuously to battery condition
and delivers whatever charge rate is
required.
• LED display confirms the state of charge.
• Made in the EU.
• MODEL NO. C/TRONIC12/24
• List Price £139.95
OFFER PRICE
£69.95
£83.94
50ltr Wet & Dry Industrial
Vacuum Cleaner 1200W
Stainless Bin
exc VAT
inc VAT
Save
50%
2tonne Long Chassis Trolley Jack
•
•
•
•
•
•
• Powerful 1200Watt motor.
• High quality stainless steel tank.
• Tough, locking cartridge filter for rough
continuous use.
• High quality Ø45mm tubes and accessories.
• Model No. PC250
• List Price £399.95
Save
46%
OFFER PRICE
OFFER PRICE
£249.95
£299.94
Min./Max. Saddle Height: 130/390mm.
Chassis Length: 647mm.
Fitted with overload valve for extra safety.
Weighs only 19kg.
Model No. 1150CX
List Price £79.95
£42.95
£51.54
exc VAT
inc VAT
Save
38%
50ltr Direct Drive
Compressor 2.5hp
exc VAT
inc VAT
50ltr Belt Drive Compressor
with Petrol Engine 5.5hp
POWERED by
• Air Displacement: 9.5cfm
(269ltr/min).
• Maximum Free Air Delivery:
6.7cfm (190ltr/min).
• Maximum Pressure:
116psi/8bar.
• Aluminium cylinder with
cast iron liner gives reduced
weight and improved
resistance to wear.
• Pump head directly coupled to
heavy-duty induction motor for
reliable and quiet operation.
• Precision welded receiver tank manufactured to meet
Pressure Vessel Directive 87/404/EEC.
• Fitted with fully automatic pressure cut-out switch
and air regulator with gauge.
• Model No. SA9950/2.5
• List Price £519.95
Promotion Code GWE11
Save
62%
OFFER PRICE
£199.95
£239.94
exc VAT
inc VAT
• Air Displacement: 14.2cfm
(402ltr/min).
• Maximum Free Air Delivery:
11.2cfm (317ltr/min).
• Maximum Pressure:
145psi/10bar.
• Fully mobile compressor
with Honda GX160 power
unit coupled to heavy-duty, twin
piston, cast iron pump.
• Fitted with low pressure transport
wheels and protected by 360°
bumper bar.
• Features twin gauges and air outlet regulator.
• Runs on unleaded fuel.
• Model No. SA4050/55
• List Price £2349.95
Prices exclude VAT unless stated otherwise
OFFER PRICE
Save
38%
£1,149.95 exc VAT
£1,739.94 inc VAT
39
24V 1/2"Sq Drive Cordless Impact Wrench 410lb.ft
50ltr Workshop Parts
Cleaning Tank
• One-piece heavy-duty steel tank.
• Fully sealed electric motor with magnetic
drive pump unit.
• Flexible metal nozzle directs solvent
over work.
• Lid features self-latching fusible link
which automatically snaps lid shut in the
event of a fire.
• Supplied with removable shelf, small
parts basket and workshop stand
with integral storage shelf.
• Model No. SM19
• List Price £179.95
•
•
•
•
OFFER PRICE
£114.95
£137.94
•
•
exc VAT
inc VAT
Up to 550Nm (410lb.ft) torque,
makes this tool suitable for removing
the most stubborn wheel nuts.
Forward and reverse control integrated into
housing for ease of use.
Superbly balanced tool with side handle
and vibration reducing grip.
Supplied with 24Volt Ni-Cd battery
pack and 1 hour mains charger.
Model No. CP2450
List Price £349.95
Save
36%
FREE
170mm 6-Speed Sander/Polisher
1300W
13pc 1/2"Sq Drive Impact
Socket Set - Metric
•
•
•
•
1300Watt Professional sander/polisher.
6 Position electronic variable speed control.
Maximum Load Speed: 3000rpm.
Supplied with side handle, backing pad and
disc spanner.
• Model No. MS900PS
• List Price £134.95
FREE
•
•
150 x 50mm Buffing &
Polishing Foam Head M14
Blue/Medium
150 x 50mm Buffing &
Polishing Foam Head M14
White/Dense
•
•
•
Model No.
PTC/CH/M14-B
List Price £8.45
•
£89.95
£107.94
Save
33%
exc VAT
inc VAT
Folding
Cranes
•
•
•
•
•
•
•
Model No.
CP2450BP
List Price £109.95
OFFER PRICE
OFFER PRICE
Model No.
PTC/CH/M14-W
List Price £9.95
Second Battery
Model No. AK5613M
List Price £26.95
Save
31%
£239.95
£287.94
exc VAT
inc VAT
18V Cordless Grease Gun
Lifts 1tonne at 893mm jib extension.
Fast folding design.
Side pump access with removable handle.
Super economy model requires some self-assembly.
Model No. SC10
•
•
•
•
•
•
Lifts 1.8tonne at 1020mm jib extension.
Folds for easy storage.
Bottle jack type hydraulic unit for economy.
Tested to 25% overload.
Some self-assembly required.
Model No. PH20
Save up to
38%
OFFER PRICE
exc VAT
inc VAT
Model No
Capacity
Overall Height
Maximum Lift Height at
Minimum/Maximum Jib Extension
SC10
1tonne
1550mm
1855/1990mm
£289.95
£179.95
£215.94
PH20
1.8tonne
1560mm
1880/2320mm
£379.95
£249.95
£299.94
List Price
Get your FREE
Catalogue
• High power,
professional,
cordless grease
gun, developing
8000psi.
• Ideal for in-field
lubrication where power
and speed are required.
• Suitable for 400g cartridges,
manual or bulk filling.
• Features LCD battery condition
indicator, air bleed and heavy-duty
aluminium pressure head.
• Supplied with 18V 1.7Ah battery
and mains charger.
• Model No. CPG18V
• List Price £199.95
FREE
Second Battery
• Model No.
CPG18VBP
• List Price £49.95
OFFER PRICE
Save
25%
£149.95
£179.94
exc VAT
inc VAT
YOUR LOCAL DEALER
Sealey Group
Kempson Way, Suffolk Business Park,
Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
email
Web
[email protected]
www.sealey.co.uk
Promotion valid from 1st July 2011 to 30th September 2011. Offers will be withdrawn when stock
is sold. We reserve the right to change products and pricing at any time. Specifications and
descriptions on this promotion are given in good faith but may change without notice and do not
form any part of a sale contract E & OE.
Browse Sealey’s impressive full range of
products online at www.sealey.co.uk
and request your free catalogue.
* TRX-STAR, TRX-TS and TRX-P tools are suitable for driving TORX® and TORX PLUS® fasteners respectively. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.
40
Prices exclude VAT unless stated otherwise
Promotion Code GWE11