Download Franklin TG-470 Euro Interpreter 12 Language

TG-470
User’s Guide
www.franklin.com
License Agreement
READ THIS LICENSE AGREEMENT BEFORE USING
THE ELECTRONIC REFERENCE. YOUR USE OF THE
ELECTRONIC REFERENCE DEEMS THAT YOU ACCEPT
THE TERMS OF THIS LICENSE. IF YOU DO NOT
AGREE WITH THESE TERMS, YOU MAY RETURN THIS
PACKAGE WITH PURCHASE RECEIPT TO THE DEALER
FROM WHICH YOU PURCHASED THE ELECTRONIC
REFERENCE AND YOUR PURCHASE PRICE WILL BE
REFUNDED. ELECTRONIC REFERENCE means the
software product and documentation found in this package
and FRANKLIN means Franklin Electronic Publishers, Inc.
Limited Use License
All rights in the ELECTRONIC REFERENCE remain the
property of FRANKLIN. Through your purchase, FRANKLIN
grants you a personal and nonexclusive licensed to use this
ELECTRONIC REFERENCE. You may not make any
copies of the ELECTRONIC REFERENCE or of the data
stored therein, whether in electronic or print format. Such
copying would be in violation of applicable copyright laws.
Further, you may not modify, adapt, disassemble,
decompile, translate, create derivative works of, or in any
way reverse engineer the ELECTRONIC REFERENCE.
You may not export or reexport, directly or indirectly, the
ELECTRONIC REFERENCE without compliance with
appropriate governmental regulations. The ELECTRONIC
REFERENCE contains Franklin’s confidential and
proprietary information which you agree to take adequate
steps to protect from unauthorized disclosure or use. This
license is effective until terminated. This license terminates
immediately without notice from FRANKLIN if you fail to
comply with any provision of this license.
Key Guide
Function Keys
Goes to the Translator Entry screen. In
the Translator toggles between the
Source and Target languages.
Goes to the Phrases menu.
Goes to the Databank menu.
Goes to the Calculator.
Goes to the Converter menu.
Toggles between Home and World Time.
Goes to the Games menu.
Turns the unit on or off.
Cycles through the 12 available symbols.
Goes to the Settings menu.
Shifts to type capital letters and
punctuation marks.
In the Translator, returns to the Entry
screen. At the entry screen, clears the
typed letters. In the Calculator, clears all
entries. In the Converter, Databank and
Games, goes to the main menu.
Cycles through the available accents.
Goes back one step. Erases a letter at
the Entry screens.
At menus and Translator entries, pages
down. At data entry screens, enters a
space.
Enters a word or selects an item. In the
Calculator, performs a calculation. In the
Databank goes to the number field.
Direction Keys
Move in the indicated direction.
Goes to the next entry.
Goes to the previous entry.
Calculator Keys
Q–P
Types numbers.
A(1/x) Calculates a reciprocal.
S(√x)
Calculates a square root.
Squares a number.
D(x2)
F(%)
Calculates a percentage.
G(.)
Inserts a decimal point.
H(+)/J(-) Adds, subtracts, multiplies
K(x)/L(÷) or divides numbers.
Z(+/-)
Changes the number on the screen to a
negative or positive number.
Adds the number on the screen to the
X(M+)
number stored in memory.
C(M–)
Subtracts the number on the screen from
the number stored in memory.
V(MR)
Recalls the number stored in memory.
Clears the memory.
B(MC)
Getting Started
Your TG-470 is powered by one CR2032, 3-volt
battery. Before using the device, gently pull the
battery insulation tab to remove it. Use a paper
clip to gently press the RESET button on the
back of the device. See “Resetting Your TG470” for details.
Warning! Pressing the RESET button with
more than light pressure may permanently
disable the device.
Replacing the Battery
Replace the battery when you see the low
battery indicator.
Warning!! If the battery wears out completely,
or if you take more than a few seconds while
changing the battery, any user-entered
information will be erased. You should always
keep written copies of your important
information.
Follow these instructions to install or replace
the battery.
1. Turn the unit off and then turn it over.
2. Gently push the tab on the battery cover and
pull the cover off.
3. Use a paper clip, if necessary, to remove the
old battery.
4. Install the new battery positive side facing up
in place of the old battery.
Note: Do not remove the foam protector from
the other battery slot or attempt to install a
battery there. Your device only functions with
the battery where it was pre-installed.
5. Replace the battery cover.
To Set or Change the Message Language
The first time you use this translator, you must
set the Message language. The Message
language is the language of screen instructions
and menu items.
Press the letter for the language you want: E
for English, F for French, D for German, I for
Italian, S for Spanish, N for Dutch, P for
Portuguese, R for Russian, C for
Czechoslovakian, M for Hungarian, O for
Polish and T for Turkish.
To change the Message language, follow the
steps below.
1. Press
.
2. Use
to highlight Message Language and
press ENTER to select it.
3. Use
to move the highlight to the language
you want.
4. Press ENTER to select it.
To Set Source and Target Languages
The Source (From:) language is the language
in which you enter a word at the Translator
Entry screen. The Target (To:) language is the
language in which you wish to view the
translation. To select Source and Target
languages, do the following.
1. Press
.
2. Press ENTER to select Language.
The From language flashes.
3. Use
or
to select the Source language
and press ENTER or
.
The To language flashes.
4. Use
or
to select the Target language
and press ENTER.
5. Press
screen.
to return to the Translator Entry
You can toggle between the Source and Target
languages at the Translator Entry screen by
pressing
.
To Change the Settings
When using this translator, you can adjust the
screen contrast, the shutoff time and the type
size. The shutoff time is how long your TG-470
stays on if you forget to turn it off.
1. Press
.
2. Press
or
to highlight the item you
want and press ENTER to select it.
3. Use the arrow keys to adjust the selected
setting.
4. Press ENTER to confirm the change.
Press BACK to leave the setting unchanged.
5. Press
screen.
to return to the Translator Entry
Using the Clocks
The clock lets you set a Home Time and view
local times in 45 cities around the world. You
must set the Home Time before viewing World
Times as World Times are based on Home
Time.
To Set Home Time
1. Press
.
You see Home City on the screen.
2. Press S to enter the setting mode.
3. Press ENTER to select Set Time Format.
Press
or
to cycle through the 12- and
24-hour Day/ Month/Year formats. Press
ENTER to save your selection.
4. Press
to highlight Set DST and press
ENTER to select it.
Press
or
to toggle between DST On
or DST Off. Press ENTER to select your
choice.
5. Press
to highlight Set Time and press
ENTER to select it.
Press
or
displayed. Press
press
or
until the current hour is
to move to minutes, then
until the current minute is
displayed.
Press ENTER to set the time.
6. Press
to highlight Set Date and press
ENTER to select it.
Use
or
to move to the next or previous
field. Use
or
to scroll to the current
day/month/year. Press ENTER to set it.
7. Press
to highlight Set Home City and
press ENTER to select it.
Press
or
until your local city is
displayed. Press ENTER to select it.
8. Press CLEAR or BACK to exit setting mode.
To View World Time
1. Press
until you see World City.
2. Press
or
to view the date and time in
the list of available cities.
CITY
LONDON
LISBON
PARIS
BERLIN
ROME
AMSTERDAM
BARCELONA
MADRID
BRUSSELS
HELSINKI
CAIRO
MOSCOW
RIYADH
TEHRAN
DUBAI
KABUL
KARACHI
DELHI
DHAKA
YANGON
BANGKOK
BEIJING
HONG KONG
ABBREVIATION
LON
LIS
PAR
BER
ROM
AMS
BCN
MAD
BRU
HEL
CAI
MOW
RUH
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
BEI
HKG
CITY
SINGAPORE
TOKYO
ADELAIDE
SYDNEY
GUAM
NOUMEA
WELLINGTON
AUCKLAND
TONGA
MIDWAY ISLANDS
HONOLULU
ANCHORAGE
LOS ANGELES
DENVER
CHICAGO
NEW YORK
TORONTO
CARACAS
RIO DE JANEIRO
MID ATLANTIC
FERNANDO DE NOAH
AZORES ISLANDS
ABBREVIATION
SIN
TYO
ADL
SYD
GUM
NOU
WLG
AKL
TNG
MID
HNL
ANC
LAX
DEN
CHI
NYC
YYZ
CCS
RIO
MAT
FER
AZO
You can also set a city to be the World City you
first view when you enter World Time.
1. Press
until you see World City.
2. Press S to enter Setting Mode.
3. Press
to highlight Set World City and
press ENTER to select it.
Press
or
until the city you want is
displayed. Press ENTER to select it.
4. Press CLEAR or BACK to exit setting mode.
Translating Words
You can use this translator to translate words
from a Source language to a Target language.
Press
to toggle between the current
Source and Target languages. You can change
the Source and Target languages at any time.
Please see “To Set Source and Target
Languages” to learn how.
1. Press
to go to the Translator Entry
screen.
The entry language will be your Source
language.
2. Type a word to look up.
You can type accent marks, diacritical marks
and capital letters, but they are not needed to
find matches.
To type accents, type the letter first then press
ACNT.
To type a punctuation mark, type the letter first
then press SYMB repeatedly until you see the
one you want.
3. Press ENTER.
The message Found: number flashes on the
screen followed by the list of words and/or
phrases.
4. Use
or
to move the highlight to the
word or phrase you want and press ENTER to
see its translation.
If there is more than one screen of data, use
or SPACE to read.
5. Press BACK to return to the list.
6. Press CLEAR to start a new search.
Translating Phrases
Note: The phrases in this product are listed in
the current Source language. To find
translations of phrases, do the following.
1. Press
.
2. Use
or
to move the highlight to the
category you want and press ENTER to select
it.
If necessary, use
or
to move the
highlight to the sub-category you want and
press ENTER to select it.
You can also type the name of the item you
are looking for, or you can type a letter to go to
the first category or sub-category starting with
that letter. Once you type a letter, a small
Seach entry screen appears.
3. Use
or
to move the highlight to the
phrase you want.
You can also type a word you are looking for,
or you can type a letter to go to the first phrase
starting with that letter.
4. Press ENTER to see the translation.
If there is more than one screen of data, use
to read.
5. Press BACK to return to the list.
6. Press CLEAR to return to the Phrases menu.
Press
screen.
to return to the Translator Entry
Using the Databank
This product has a databank that can save as
many as 100 names and phone numbers. The
total amount of names and numbers that you
can save depends upon the number of
characters in each entry.
To Add an Entry to the Phone List
1. Press
.
2. Press ENTER to select New Entry.
3. Type a name and then press ENTER.
Each name can contain up to 30 characters,
including spaces, with letters appearing as
capitals. Note: Accented characters are not
supported in the phone list.
To delete a character, press BACK.
4. Use the numbered keys to type a phone
number and then press ENTER to store your
data.
Note: You cannot type letters in a phone
number.
Warning! Your phone list information is safely
stored in memory as long as the battery supplies
power. However, if the battery loses all power, this
information will be permanently lost. Always keep
written copies of your important information.
To View the Phone List
1. Press
.
2. Use
, if necessary, to highlight View:…
Entries, then press ENTER.
3. To view an entry, use
or
to find it, or
type the name you want to see.
4. Press
or
to view an entry if it is too long
to fit on the screen.
To Edit Phone List Entries
1. Press
.
2. Press
to highlight Edit Entry and then
press ENTER to select it.
3. Use
or
to find the entry you want or
type the name you’re looking for, then press
ENTER.
4. Edit the name field, then press ENTER to
move to the number field.
Press BACK to delete a character to the left of
the cursor.
5. Edit the Number field, then press ENTER to
save all changes.
Press CLEAR to return to the Databank menu
without saving your changes.
To Delete an Entry from the Phone List
1. Press
.
2. Use
to highlight Delete Entry and press
ENTER to select it.
3. Use
or
to find the entry you want or
type the name you’re looking for, then press
ENTER.
4. Press Y to delete the entry or N to cancel the
deletion.
Note: Y and N represent Yes and No and
change with the selected Message language.
For example, if French is the selected
Message language, these would be O and N.
To Erase All the Phone List Entries
Warning! This procedure permanently erases
all the names and numbers in your phone list.
1. Press
.
2. Use
to highlight Erase All Data and press
ENTER to select it.
3. Press Y to erase all the entries or N to cancel
the deletion.
Using a Password
You can use a password to keep the
information in the Databank private. The
password is requested when the unit is turned
on and the Databank is accessed.
Password Warnings
Warning! After you set the password, you must
enter it to access the databank for the first time
during a session. Always record your password
and keep it in a separate place.
If you forget the password, you must reset the
unit to access the databank.
Use the end of a straightened paper clip to
gently press the reset button located on the
back of your unit.
If the unit does not reset after pressing the
reset button, remove the battery, wait at least
two minutes, and then re-install it. For battery
instructions, see “Replacing the Battery”.
Warning! Resetting the unit erases all userentered information. Always keep written
copies of your data.
To Set a Password
1. Press
.
2. Use
to highlight Set Password and press
ENTER to select it.
3. Type a password and then press ENTER.
Your password can have up to 8 letters.
You are prompted to retype your password.
4. Type your password again exactly as you did
the first time.
5. Press ENTER to confirm and enable your
password.
To test the password, press
twice, press
, type the password, and press ENTER.
To disable the password, repeat Steps 1 and 2
above, and press ENTER when Enter New
Password is displayed.
Using the Calculator
To Make a Calculation
1. Press
.
2. Type a number.
You can type up to 10 digits.
3. Press H(+), J(-), K(X), L(÷) to add, subtract,
multiply, or divide.
4. Type another number.
5. Press ENTER.
To repeat the calculation, press ENTER again.
6. Press CLEAR to clear the current calculations.
To Use Calculator Memory
1. In the Calculator, make a calculation or type a
number.
2. To add the number on the screen to the
number stored in memory, press X(M+).
To subtract the number on the screen from the
number stored in memory, press C(M-).
M indicates the number is stored in memory.
3. To retrieve the number from memory, press
V(MR).
4. To clear the memory, press B(MC).
Using the Converters
The converter allows you to easily convert
measurements and currency.
To Do a Metric Conversion
1. Press
.
2. Press
or
to highlight a conversion
category, and press ENTER to select it.
If there is a sub-menu, repeat Step 2 again.
3. Type a number after one of the units.
Press
or
to move between the lines.
Press BACK to delete a number.
4. Press ENTER to convert it.
5. Press CLEAR when finished.
To Do a Currency Conversion
1. Press
.
2. Use
to highlight Currency and then press
ENTER to select it.
3. Enter a conversion rate and press ENTER.
The rate should be in units of the other
currency per one unit of the home currency (n
other/1 home).
4. Type an amount for the home or other
currency.
Press
or
to move between the lines.
Press BACK to erase a number.
5. Press ENTER to convert it.
To Use the Euro Converter
This product features a Euro converter for
conversion between the Euro and 12 national
currencies. The built-in rates are those adopted
by the Council of the European Union for the
12 participating countries, based on the set
conversion rate of 1 Euro=x in national
currency. These rates cannot be edited in
accordance with the rounding regulations set
by the European commission. Rates are set as
follows:
1 EURO
= 40.3399 BEF (Belgian Francs)
= 1.95583 DEM (German Marks)
= 166.386 ESP (Spanish Pesetas)
= 6.55957 FRF (French Francs)
= 0.787564 IEP (Irish Pounds)
= 1936.27 ITL (Italian Lire)
= 40.3399 LUF (Luxemburg Francs)
= 2.20371 NLG (Dutch Gilders)
= 13.7603 ATS (Austrian Shillings)
= 200.482 PTE (Portuguese Escudos)
= 5.94573 FIM (Finnish Marks)
= 340.750 GRD (Greek Drachma)
1. Press
.
2. Press ENTER to select Euro Converter.
3. Use
or
to highlight a conversion
category, and press ENTER to select it.
4. Type an amount to convert and press ENTER.
Press N (INV) to reverse the direction of the
conversion.
5. Press CLEAR to make another conversion.
6. Press
screen.
to return to the Translator Entry
Playing the Games
There are five fun games for you to choose
from: Hangman, Quiz, Chance, Memory and
Keyboard Wiz.
To Select a Game
1. Press
.
2. Use
or
to move the highlight to a
game you want.
3. Press ENTER to select it.
To Set a Skill Level
You can select the degree of difficulty for the
games from the following: Beginner,
Intermediate, Advanced, Expert or Wizard.
1. Press
.
2. Use
to highlight to Game Settings and
press ENTER to select it.
3. Use
or
to move the highlight to the
skill level you want and press ENTER to select
it.
4. Press BACK to return to the Games list.
To Play Hangman
Hangman selects a mystery word and
challenges you to guess it letter by letter. The
letters of the mystery word are hidden by
question marks. The number of guesses
remaining is indicated by #’s.
1. Select Hangman on the Games menu.
2. Type a letter you think is in the word.
If you are correct, the letter appears in place of
the question mark. If you are wrong, it replaces
an # on the screen and another part of the
man appears.
3. Press ENTER to show the word and end the
round.
4. Press ENTER to play a new round.
To Play Quiz
Quiz tests your translation skills. Note: to
change the language for Quiz, you must
change the Source language before you play.
Please see “To Change the Source and Target
Languages” to learn how.
1. Select Quiz on the Games menu.
A word appears on the screen.
2. Pronounce the word and try to guess its
translation.
3. Press ENTER to see the translation.
4. Press ENTER to play another round
To Play Chance
You can have your TG-470 select a maximum
of 9 numbers from the range of 1-99.
1 Select Chance on the Games menu.
You see the message Set#(1-9) and the
number 6 flashes on the screen to indicate that
this can be changed.
2. Tap ENTER to select 6 or press
or
to
select any number from 1-9.
For example, select 5.
3. Press ENTER again.
You can now select your highest number which
must be equal to or less than 99.
4. To select a maximum number, press
or
to select a new number.
For example, select 75.
5. Press ENTER repeatedly to see new sets of
numbers.
6. Press BACK to clear your selections and start
a new round or press CLEAR to return to the
Games menu.
To Play Memory
As the name suggests, this game tests your
memory. The game has five levels with
increasing sets of hidden numbers: Beginner-4,
Intermediate-6, Advanced-8, Expert-10 and
Wizard-12
1. Select Memory on the Games menu.
2. Press the direction arrows to move to a hidden
number and press ENTER to see it.
The number on the cursor is revealed.
3. Continue doing this until you find matching
numbers.
The object of the game is to find all the
matching number sets. When you reveal two
similar numbers one after the other, both
numbers stay revealed, otherwise the numbers
remain hidden. When all the numbers are
revealed, the game is over and a new round
begins.
4. Press BACK or CLEAR to return to the
Games menu.
To Play Keyboard Wiz
This game tests your knowledge of the keypad
and your reflexes! Letters race across the
display. The object of the game is to tap the
letter that races across the screen. There are 5
levels of speed.
1. Select Keyboard Wiz on the Games menu..
2. Press the letter that is leftmost on the screen.
If you press the correct letter, it disappears.
Once 20 characters are displayed, the game is
over.
3. Press ENTER to play another round.
Resetting Your TG-470
If the keyboard fails to respond,or if the screen
performs erratically, perform a system reset by
following the steps below.
1. Hold CLEAR and press
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press the reset
button located on the back of the unit.
Warning! Pressing the reset button with more
than light pressure may permanently disable
your TG-470. In addition, resetting the TG-470
erases settings and user-entered information.
Specifications
Model: TG-470
Size: 12.3 x 15.4 x 1.7 cm
Battery: 1 CR-2032 lithium
ISBN 1-59074-295-8
Contacts
Please have your product number (TG-470) and
date of purchase handy when you call to register.
To register and for customer support, please call
1-800-266-5626 (US only). For technical support,
call 609-386-8997 or visit us at
www.franklin.com.
Cleaning this Product
To clean this product, spray a mild glass
cleaner onto a cloth and wipe its surface. Do
not spray liquids directly onto the unit. Do not
use or store this product in extreme or
prolonged heat, cold, humidity, or other
adverse conditions. If you have a problem with
this product, refer to the warranty.
Warning! If the battery wears out completely,
or if you take more than a few seconds while
changing the battery, any user entered
information may be erased. You should always
keep written copies of your important
information.
Battery disposal: Do not dispose of batteries
with normal household waste. Please obey
your local regulations when disposing used
batteries.
Note: If the keyboard fails to respond or if the
screen performs erratically, perform a system
reset.
Warning! Pressing the reset button with more
than light pressure may permanently disable
your unit. In addition, resetting the unit erases
settings and information you may have
entered.
© 2002-2004 Franklin Electronic Publishers,
Inc.
Burlington, N.J. 08016-4907 USA. All rights
reserved.
FCC Tested To Comply With FCC
Standards
FOR HOME OR OFFICE USE
U.S. PATENTS: 4,830,618; 4,891,775;
5,113,340; 5,218,536
FCC Notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and
receiver.
–Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV
technician for help.
NOTE: This unit was tested with shielded cables on
the peripheral devices. Shielded cables must be used
with the unit to insure compliance.
NOTE: The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications
could void the user’s authority to operate the
equipment.
This unit may change operating modes, lose
information stored in memory, or fail to respond
due to Electrostatic Discharge or Electrical fast
transients. Normal operation of this unit may be reestablished by pressing the reset key, by pressing
, or by removing and replacing the batteries.
Limited Warranty (U.S. only)
LIMITED WARRANTY, DISCLAIMER OF WARRANTIES
AND LIMITED REMEDY
(A) LIMITED WARRANTY. FRANKLIN WARRANTS TO
THE ORIGINAL END USER THAT FOR A PERIOD OF
ONE (1) YEAR FROM THE ORIGINAL DATE OF
PURCHASE AS EVIDENCED BY A COPY OF YOUR
RECEIPT, YOUR FRANKLIN PRODUCT SHALL BE FREE
FROM DEFECTS IN MATERIALS AND WORKMANSHIP.
THIS LIMITED WARRANTY DOES NOT INCLUDE
DAMAGE DUE TO ACTS OF GOD, ACCIDENT, MISUSE,
ABUSE, NEGLIGENCE, MODIFICATION, UNSUITABLE
ENVIRONMENT OR IMPROPER MAINTENANCE. THE
SOLE OBLIGATION AND LIABILITY OF FRANKLIN, AND
YOUR EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY, WILL BE REPAIR OR REPLACEMENT WITH
THE SAME OR AN EQUIVALENT PRODUCT OF THE
DEFECTIVE PORTION OF THE PRODUCT, AT THE
SOLE OPTION OF FRANKLIN IF IT DETERMINES THAT
THE PRODUCT WAS DEFECTIVE AND THE DEFECTS
AROSE WITHIN THE DURATION OF THE LIMITED
WARRANTY. THIS REMEDY IS YOUR EXCLUSIVE
REMEDY FOR BREACH OF THIS WARRANTY. THIS
WARRANTY GIVES YOU CERTAIN RIGHTS; YOU MAY
ALSO HAVE OTHER LEGISLATED RIGHTS THAT MAY
VARY FROM JURISDICTION TO JURISDICTION.
(B) DISCLAIMER OF WARRANTIES AND LIMITATION
OF LIABILITY. EXCEPT FOR THE LIMITED
WARRANTIES EXPRESSLY RECITED ABOVE, THIS
FRANKLIN IS PROVIDED ON AN “AS IS” BASIS,
WITHOUT ANY OTHER WARRANTIES OR CONDITIONS,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABLE QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, OR THOSE ARISING BY LAW, STATUTE,
USAGE OF TRADE, OR COURSE OF DEALING. THIS
WARRANTY APPLIES ONLY TO PRODUCTS
MANUFACTURED BY FRANKLIN AND DOES NOT
INCLUDE BATTERIES, CORROSION OF BATTERY
CONTACTS OR ANY OTHER DAMAGE CAUSED BY
BATTERIES. NEITHER FRANKLIN NOR OUR DEALERS
OR SUPPLIERS SHALL HAVE ANY LIABILITY TO YOU
OR ANY OTHER PERSON OR ENTITY FOR ANY
INDIRECT, INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGES WHATSOEVER,
INCLUDING, BUT NOT LIMITED TO, LOSS OF REVENUE
OR PROFIT, LOST OR DAMAGED DATA OR OTHER
COMMERCIAL OR ECONOMIC LOSS, EVEN IF WE
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR THEY ARE OTHERWISE
FORESEEABLE. WE ARE ALSO NOT RESPONSIBLE
FOR CLAIMS BY A THIRD PARTY. OUR MAXIMUM
AGGREGATE LIABILITY TO YOU, AND THAT OF OUR
DEALERS AND SUPPLIERS, SHALL NOT EXCEED THE
AMOUNT PAID BY YOU FOR THE FRANKLIN PRODUCT
AS EVIDENCED BY YOUR PURCHASE RECEIPT. YOU
ACKNOWLEDGE THAT THIS IS A REASONABLE
ALLOCATION OF RISK. SOME STATES/COUNTRIES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. IF THE LAWS OF THE RELEVANT
JURISDICTION DO NOT PERMIT FULL WAIVER OF
IMPLIED WARRANTIES, THEN THE DURATION OF
IMPLIED WARRANTIES AND CONDITIONS ARE LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY
GRANTED HEREIN.
(C) WARRANTY SERVICE: UPON DISCOVERING A
DEFECT, YOU MUST CALL FRANKLIN’S CUSTOMER
SERVICE DESK, 1-800-266-5626, TO REQUEST A
RETURN MERCHANDISE AUTHORIZATION (“RMA”)
NUMBER, BEFORE RETURNING THE PRODUCT
(TRANSPORTATION CHARGES PREPAID) TO:
FRANKLIN ELECTRONIC PUBLISHERS, INC.
ATTN: SERVICE DEPARTMENT
ONE FRANKLIN PLAZA
BURLINGTON, NJ 08016-4907
IF YOU RETURN A FRANKLIN PRODUCT, PLEASE
INCLUDE A NOTE WITH THE RMA, YOUR NAME,
ADDRESS, TELEPHONE NUMBER, A BRIEF
DESCRIPTION OF THE DEFECT AND A COPY OF YOUR
SALES RECEIPT AS PROOF OF YOUR ORIGINAL DATE
OF PURCHASE. YOU MUST ALSO WRITE THE RMA
PROMINENTLY ON THE PACKAGE IF YOU RETURN
THE PRODUCT, OTHERWISE THERE MAY BE A
LENGTHY DELAY IN THE PROCESSING OF YOUR
RETURN. WE STRONGLY RECOMMEND USING A
TRACKABLE FORM OF DELIVERY TO FRANKLIN FOR
YOUR RETURN.
Limited Warranty
(EU and Switzerland)
This product, excluding batteries and liquid crystal display
(LCD), is guaranteed by Franklin for a period of two years
from the date of purchase. It will be repaired or replaced
with an equivalent product (at Franklin’s option) free of
charge for any defect due to faulty workmanship or
materials.
Products purchased outside the European Union and
Switzerland that are returned under warranty should
be returned to the original vendor with proof of
purchase and description of fault. Charges will be
made for all repairs unless valid proof of purchase is
provided.
This warranty explicitly excludes defects due to
misuse, accidental damage, or wear and tear. This
guarantee does not affect the consumer’s statutory
rights.
Limited Warranty (outside U.S., EU
and Switzerland)
This product, excluding batteries and liquid crystal
display (LCD), is guaranteed by Franklin for a period
of one year from the date of purchase. It will be
repaired or replaced with an equivalent product (at
Franklin’s option) free of charge for any defect due to
faulty workmanship or materials.
Products purchased outside the United States, the
European Union and Switzerland that are returned
under warranty should be returned to the original
vendor with proof of purchase and description of fault.
Charges will be made for all repairs unless valid proof
of purchase is provided.
This warranty explicitly excludes defects due to
misuse, accidental damage, or wear and tear. This
guarantee does not affect the consumer’s statutory
rights.
MPL-28003-00
Rev. B