1
Download Nikon Coolpix 3500 Digital Camera
Transcript
En The Guide to Digital Photography with the DIGITAL CAMERA En 5.6-16.8mm1:2.7-4.8 Printed in Japan S2G10000101(11) 6MAA3811-- Shoot, View, and Enjoy A Flowchart Guide to Using Your Camera STEP 1—Ready the camera Getting ready First Steps 16 Camera setup First Steps Camera Setup 16 59 STEP 2—Take pictures Snapshots (auto mode) Tutorial: Taking Pictures 23 Creative photography (scene mode) Getting Creative 36 Custom shots and movies Taking Pictures: The Details 41 …while shooting… Review and Deletion 31 …after shooting… Basic Playback 68 STEP 3—Play them back… …and delete unwanted pictures… …immediately Keep or Delete 48 …while shooting Review and Deletion 31 …during playback Basic Playback 68 Delete multiple pictures Deleting Pictures 76 STEP 4—Install camera software Install software Quick Start Guide (provided) — Get to know Nikon View Nikon View Reference Manual (provided on CD) — STEP 5—Copy pictures to your computer Transfer pictures Quick Start Guide (provided) — Product Documentation The documentation for this product includes the manuals listed below. Please be sure to read all instructions thoroughly to get the most from your camera. Quick-Start Guide The Quick-Start Guide takes you through the process of unpacking and setting up your Nikon digital camera, taking your first pictures, installing software, and transferring pictures to your computer. Guide to Digital Photography The Guide to Digital Photography (this manual) provides complete operating instructions for your camera. Nikon View Reference Manual The Nikon View Reference Manual can be found in electronic format on the reference CD provided with your camera. For information on viewing the Reference Manual, see the Quick-Start Guide. Overview Getting to Know the COOLPIX 3500 Menu Guide First Steps Taking Pictures Review and Deletion Getting Creative Beyond Point-and-Shoot Fine-Tuning Camera Settings Camera Setup Basic Playback The Playback Menu Technical Notes Index i For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol: This icon marks warnings, information that should be read before using your Nikon product to prevent possible injury. WARNINGS Turn off immediately in the event of malfunction Should you notice smoke or an unusual smell coming from the equipment or from the AC adapter (available separately), unplug the AC adapter or remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing the battery, take the equipment to a Nikon-authorized service center for inspection. Do not use in the presence of flammable gas Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire. Observe caution when using the camera strap Caution should be exercised to prevent strangulation when wearing the camera strap around your neck. Never place the strap around the neck of an infant or child. ii Do not disassemble Touching the product’s internal parts could result in injury. In the event of a malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, remove the battery or AC adapter and then take the product to a Nikon-authorized service center for inspection. Observe proper precautions when handling batteries Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: • Be sure the product is off before replacing the battery. If you are using an AC adapter, be sure it is unplugged. • Use only a rechargeable Nikon EN-EL2 lithium-ion battery (supplied). • When inserting the battery, do not attempt to insert it upside down or backwards. • Do not short or disassemble the battery. • Do not expose the battery to flame or to excessive heat. • Do not immerse in or expose to water. • Do not transport or store with metal objects such as necklaces or hairpins. • Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the battery when no charge remains. • When the battery is not in use, attach the terminal cover and store in a cool place. • Immediately after use, or when the product is used on battery power for an extended period, the battery may become hot. Before removing the battery, turn the camera off and allow the battery to cool. • Discontinue use immediately should you notice any changes in the battery, such as discoloration or deformation. Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. The lens section • Do not insert your fingers in the gap between the rotating lens section and the camera body. Your fingers could be pinched between the body and the lens section, resulting in injury. Particular care should be observed in the case of small children. • To prevent your fingers, flesh, or other objects from being pinched in the gap between the rotating lens section and the camera body, return the lens section to its housing in the camera body before transporting the camera. Removing memory cards Memory cards may become hot during use. Observe due caution when removing memory cards from the camera. CD-ROMs The CD-ROMs on which the software and manuals are distributed should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment. Observe caution when operating the flash Using the flash close to your subject’s eyes could cause temporary visual impairment. Particular care should be observed if photographing infants, when the flash should be no less than one meter (39˝) from the subject. Avoid contact with liquid crystal Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes or mouth. Keep out of reach of children Particular care should be taken to prevent infants from putting the battery or other small parts into their mouths. iii Notices • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product. • While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately). Notice for customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found E3500 to comply with the limits for a Class B digiTested To Comply tal device, pursuant to Part 15 of the FCC With FCC Standards rules. These limits are designed to provide reasonable protection against harmFOR HOME OR OFFICE USE ful interference in a residential installation. CAUTIONS This equipment generates, uses, and can radiate radio frequency energy and, if not Modifications installed and used in accordance with the The FCC requires the user to be notified instructions, may cause harmful interfer- that any changes or modifications made ence to radio communications. However, to this device that are not expressly apthere is no guarantee that interference will proved by Nikon Corporation may void the not occur in a particular installation. If this user’s authority to operate the equipment. equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. iv Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200 Notice for customers in Canada CAUTION This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. ATTENTION Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. • Items prohibited by law from being • Cautions on certain copies and reproductions copied or reproduced The government has issued cautions on Do not copy or reproduce paper money, copies or reproductions of securities iscoins, securities, government bonds, or sued by private companies (shares, bills, local government bonds, even if such checks, gift certificates, etc.), commuter copies or reproductions are stamped passes, or coupon tickets, except when “Sample.” a minimum of necessary copies are to The copying or reproduction of paper be provided for business use by a commoney, coins, or securities which are cirpany. Also, do not copy or reproduce culated in a foreign country is prohibpassports issued by the government, liited. censes issued by public agencies and priUnless the prior permission of the govvate groups, ID cards, and tickets, such ernment has been obtained, the copyas passes and meal coupons. ing or reproduction of unused postage • Comply with copyright notices stamps or post cards issued by the govThe copying or reproduction of copyernment is prohibited. righted creative works such as books, The copying or reproduction of stamps music, paintings, woodcut prints, maps, issued by the government and of certidrawings, movies, and photographs is fied documents stipulated by law is proprohibited except when it is done for perhibited. sonal use at home or for similar restricted and non-commercial use. Trademark Information Apple, the Apple logo, Macintosh, Mac OS, Power Macintosh, PowerBook, and QuickTime are registered trademarks of Apple Computer, Inc. Finder, Power Mac, iMac, and iBook are trademarks of Apple Computer, Inc. IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Internet is a trademark of Digital Equipment Corporation. CompactFlash is a trademark of SanDisk Corporation. Lexar Media is a trademark of Lexar Media Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Inc. Zip is a registered trademark of Iomega Corporation in the U.S. and other countries. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. v Table of Contents Product Documentation .................................................................................. For Your Safety ............................................................................................... Notices ........................................................................................................... Introduction: Before You Begin ...................................................................... Overview: About This Manual ....................................................................... Getting to Know the COOLPIX 3500: The Parts of the Camera and Their Functions ......................................................................................................... Where to Find It—Parts of the COOLPIX 3500 ................................................ How to Use It—Camera Controls and Displays ................................................ Menu Guide: Index to Menu Options ........................................................... Tutorial: Getting Started ................................................................................. First Steps: Getting Ready to Use Your Camera ............................................ Step 1—Attach the Camera Strap ................................................................... Step 2—Insert the Battery and Memory Card .................................................. Step 3—Choose a Language .......................................................................... Step 4—Set the Time and Date ....................................................................... Taking Pictures: The Basics ............................................................................. Step 1—Ready the Camera ............................................................................. Step 2—Choose Mode .......................................................................... Step 3—Adjust Camera Settings (Optional) ..................................................... Step 4—Frame the Picture .............................................................................. Step 5—Focus and Shoot ............................................................................... Step 6—Put the Camera Away ....................................................................... Review and Deletion: Quick Review ............................................................. Quick Review .................................................................................................. Full-Screen Review .......................................................................................... Thumbnail Review .......................................................................................... Getting Creative: Scene Selection ................................................................. vi i ii iv 1 2 4 4 6 9 15 16 16 16 19 21 23 23 25 26 26 28 30 31 32 32 34 36 Taking Pictures: The Details ............................................................................ Beyond Point-and-Shoot: Camera Controls .................................................. , , or Movie: Choosing a Shooting Mode ......................................... Flash Photography: The Button .................................................................. Delaying Shutter Release: Choosing a Self-Timer Mode ................................... Framing Pictures: Optical and Digital Zoom ..................................................... Keep or Delete: Picture Review ....................................................................... Fine-Tuning Camera Settings: The -Mode Menu ..................................... Making Effective Use of Memory: Image Quality and Size ............................... Adjusting Exposure: Exp. +/– ........................................................................... Keeping Colors True: White Balance ............................................................... Taking Pictures in a Sequence: Continuous ...................................................... Getting Sharper Pictures: BSS (Best Shot Selector) ........................................... Making Edges More Distinct: Image Sharpening ............................................. Camera Setup: The SET-UP Menu ................................................................... Adjusting Monitor Brightness: Brightness ........................................................ Formatting Memory Cards: CF Card Format .................................................... Setting the Time and Date: Date ..................................................................... Conserving Battery Power: Auto Off ............................................................... Choosing a Language: Language .................................................................... Choosing a USB Protocol: USB ........................................................................ Restoring Default Settings: Reset All ( Mode Only) .................................. Playing Pictures Back: Playback Mode ........................................................... Basic Playback: Full-Frame and Thumbnail Playback ................................... The Playback Menu: Managing Pictures ....................................................... Deleting Pictures: Delete ................................................................................. Ordering Prints: Print Set ................................................................................. Safeguarding Valuable Pictures: Protect .......................................................... Marking All Pictures for Transfer: Auto Transfer ............................................... Technical Notes: Camera Care, Options, and Resources ............................... Caring for the Camera and Battery ................................................................. Optional Accessories ....................................................................................... Web Resources ............................................................................................... Troubleshooting .............................................................................................. Specifications ................................................................................................. Index ................................................................................................................. 41 42 42 43 45 47 48 49 50 53 54 56 57 58 59 62 62 63 63 64 64 66 67 68 75 76 78 80 81 83 84 87 88 88 95 98 vii viii Introduction Overview 2–3 Before You Begin Getting to Know the COOLPIX 3500 4–8 Menu Guide This chapter is divided into the following sections: Overview Read this section for a description of how this manual is organized and for an explanation of the symbols and conventions used. 9–14 Getting to Know the COOLPIX 3500 Bookmark this section and refer to it as you read through the manual for information on the names and functions of camera parts. Menu Guide Refer to this section for instructions on using the menus that control some aspects of camera operation. This section also contains an index of menu options. 1 Overview About This Manual Introduction—Overview Thank you for your purchase of a COOLPIX 3500 digital camera. This manual has been written to help you enjoy taking digital pictures with your COOLPIX 3500. Read this manual thoroughly before use, and keep it handy when using the product. Use Only Nikon Brand Electronic Accessories Your Nikon COOLPIX digital camera is designed to the highest standards and includes complex electronic circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, and AC adapters) certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry. THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID NIKON WARRANTY. YOUR For more information about Nikon brand accessories, contact your local authorized Nikon dealer. 2 To make it easier to find the information you need, the following symbols and conventions are used: This icon marks tips, additional information you may find helpful when using your camera. This icon marks notes, information that you should read before using your camera. This icon indicates that more information is available elsewhere in this manual. Life-Long Learning As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe: http://www.nikon-euro.com/ • For users in Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/ Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. See the URL below for contact information: http://www.nikon-image.com/eng/ 3 Introduction—Overview This icon marks cautions, information that you should read before use to prevent damage to your camera. Getting to Know the COOLPIX 3500 The Parts of the Camera and Their Functions Introduction—Getting to Know the COOLPIX 3500 Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual. Where to Find It—Parts of the COOLPIX 3500 The parts of the camera are identified below. For more information on the function of each part, refer to the page numbers listed. 1 A 5 1 Shutter-release button ..... 28, 29 2 Eyelet for camera strap .......... 16 3 Built-in Speedlight ................. 43 4 Lens .......................... 23, 26, 95 5 Self-timer lamp ...................... 45 6 Zoom buttons ( / ) ........................... 27, 47, 70, 71 7 Cover latch ............................ 17 4 4 3 2 8 Battery-chamber/memory card slot cover .............................. 17 9 Cover release (for use when connecting optional AC adapter kit) .................................. 16, 87 10 USB connector (under cover) ......................... 82 11 /SMALL PIC. button ... 31, 72 12 button ............... 49, 60, 75 6 Introduction—Getting to Know the COOLPIX 3500 B C 7 8 16 9 15 14 13 D 12 11 10 13 Tripod socket A Mode selector ......................... 6 14 / button .... 33–34, 43, 68, 70 B Monitor ................................... 6 15 Flash-ready lamp ................... 28 C Multi selector .......................... 8 16 Non-slip grip D / button ...................... 8 5 How to Use It—Camera Controls and Displays Introduction—Getting to Know the COOLPIX 3500 A The Mode Selector mode The mode selector selects the operating mode and turns the camera on and off. Choose to take still pictures and movies ( 42), (playback mode) to play them back ( 68). Slide the mode selector to OFF when you have finished using the camera. Playback mode B The Monitor The monitor is where you compose pictures before shooting. In mode, the monitor shows the view through the camera lens, together with icons indicating the status of camera settings. 1 2 345 17 6 Battery level indicator 4 .......... 24 6 7 Self-timer indicator ................ 45 8 Number of exposures remaining ............................................. 24 16 15 14 13 7 15 2048 NORMAL 12 11 10 9 8 9 Exposure compensation ......... 53 10 Flash mode ............................ 43 11 Image quality ........................ 51 12 Image size ............................. 52 1 Zoom indicator ...................... 47 13 Sensitivity gain indicator ........ 44 2 Focus indicator 1 ..................... 28 3 Recording indicator ............... 29 14 Best shot selector (BSS) .......... 57 Continuous shooting mode ... 56 4 “Date not set” icon 2 ............. 22 15 Image sharpening .................. 58 3 5 Camera shake icon .............. 44 16 White balance ....................... 54 17 Shooting mode ............... 25, 36 1 Displayed only when shutter-release button is pressed halfway. 2 Appears when clock-calendar has not been set. 6 3 Appears only at slow shutter speeds. 4 Appears only when battery is running low. The monitor is also used to play pictures back. When a picture is played back full screen, information about the image is shown superimposed on the photo. 1 2 3 2048 NORMAL 9 8 4 5 6 0012/0015 1 Current folder ....................... 69 2 File number and type ............. 69 3 Battery level indicator* ........... 24 4 Transfer icon .............. 33, 34, 69 5 Print-order icon ..................... 78 6 Protect icon ........................... 80 7 7 Current frame number/ total number of frames ... 32, 68 8 Image quality ........................ 51 9 Image size ............................. 52 10 Time of recording .................. 22 11 Date of recording .................. 22 * Appears only when battery is running low. Controlling the Monitor To hide camera settings or photo info, press the multi selector to the left. Press the multi selector to the left a second time to view indicators again. Indicators displayed Indicators hidden 2048 NORMAL 15 7 Introduction—Getting to Know the COOLPIX 3500 11 10 C The Multi Selector Introduction—Getting to Know the COOLPIX 3500 The multi selector is used to navigate through camera menus, to page through or select pictures during playback ( 68), and to control the display of indicators in the monitor. In mode, the multi selector is also used to select the shooting mode and to turn the self-timer on and off. ON OFF Self-timer on/off ( 45) Press up to display self-timer menu, press up or down to highlight option. Press right to exit menu. Indicators on/off ( 7) Press to left to hide or display indicators in monitor. D The (Scene Mode)/ Shooting mode se42) lection ( Press down to display shooting-mode menu, press up or down to highlight option. Press right to exit menu. (Transfer) Button In mode, the / (scene mode/transfer) button is used for scene selection ( 36). When pictures are played back in the monitor, it is used to select images for transfer to a computer ( 82). When the camera is connected to a computer running Nikon View, pressing this button transfers selected pictures to a computer (not available under Mac OS X version 10.1.2; with Mac OS X version 10.1.3 or later, the USB option in the camera setup menu [ 64] must be set to PTP). See the Quick Start Guide for details. 8 Menu Guide Index to Menu Options Mode Menu Description In (auto) and scene modes, the SHOOT10, ING menu is used to set image quality and size, 49– and to adjust exposure for very bright, very dark, 53 or high-contrast subjects. SHOOTING SET-UP PLAY BACK (manual) mode gives you full control over camera settings. In addition to the settings avail- 11, able in auto and scene modes, the manual- 49– mode SHOOTING menu contains four advanced 58 shooting options. The SET-UP menu, which is accessed from the 12, SHOOTING menu, contains options for basic 59– camera setup (e.g., setting the time and date, 66 choosing a language). The PLAY BACK menu contains options for managing the pictures stored on the memory card by, for example, deleting selected images or selecting pictures for printing or for transfer to your computer. No menu is available in movie mode ( 13, 61– 62, 75– 82 42, 90). 9 Introduction—Menu Guide Changes to some camera settings are made with the help of menus that appear in the camera monitor. The options available depend on the operating mode and, in mode, on the shooting mode selected ( 42). The Shooting Menu SHOOTING MENU Introduction—Menu Guide MENU OFF SELECT IMAGE QUALITY MENU OFF SELECT SET IMAGE SIZE MENU OFF SELECT SET EXP.+/– MENU OFF 10 SELECT SET SET / Scene Pressing the MENU button when the mode selector is set to displays the SHOOTING menu. In (auto) and scene modes, this menu contains three basic shooting options. IMAGE QUALITY Choose FINE for printing and enlarging, BASIC to reduce file size. 51 IMAGE SIZE 2048 Choose small sizes for e-mail 1600 or the web, large sizes for 1280 printing. 52 EXP. +/– Adjust exposure for bright, dark, or high contrast subjects. 53 FINE NORMAL BASIC 1024 640 Choose from settings between –2.0 and +2.0 EV The Shooting Menu SHOOTING MENU MENU OFF SELECT IMAGE QUALITY FINE NORMAL BASIC MENU OFF SELECT SET IMAGE SIZE MENU OFF SELECT SET WHITE BALANCE MENU OFF SELECT SET EXP.+/– MENU OFF SELECT SET CONTINUOUS Single Continuous Multi-Shot 16 MENU OFF SELECT SET BEST SHOT SELECTOR On Off MENU OFF SELECT SET IMAGE SHARPENING Auto High Norma l Low Of f MENU OFF SELECT SET SET IMAGE QUALITY FINE Choose FINE for printing and enlargNORMAL ing, BASIC to reduce file size. BASIC 51 IMAGE SIZE 2048 Choose small sizes for e-mail 1024 1600 or the web, large sizes for 640 1280 printing. 52 A Auto WHITE BALANCE Fluorescent Match to lighting to ensure White Bal Preset Cloudy that colors are reproduced Fine Speedlight accurately. Incandescent 54 EXP. +/– Choose from settings Adjust exposure for bright, dark, or between –2.0 and high contrast subjects. +2.0 EV 53 CONTINUOUS Single Take pictures in sequence or create Continuous collages of sixteen consecutive phoMulti-Shot 16 tographs. 56 BEST SHOT SELECTOR Use when photos could be blurred by On inadvertent camera movement. Off 57 IMAGE SHARPENING Auto Heighten or reduce the Low High sharpness of outlines in your Off Normal photographs. 58 11 Introduction—Menu Guide In (manual) mode, the SHOOTING menu contains four advanced shooting options in addition to the three basic options available in auto and scene modes. The Setup Menu Introduction—Menu Guide SET-UP Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT SELECT SET CF CARD FORMAT WARNING ! All images will be deleted ! No Format MENU OFF SELECT SET DATE MENU OFF SELECT SET AUTO OFF Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT SET LANGUAGE Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT SET USB Brightness CF Card Format Date Auto Off PTP Language Mass Storage USB Reset All MENU OFF SELECT SET RESET ALL Reset all settings to default values No Reset MENU OFF 12 SELECT SET / Scene The SET-UP menu, which can be accessed from the SHOOTING menu, contains options for camera setup. SET Brightness Adjust monitor brightness. BRIGHTNESS MENU OFF / Maximum (Five levels) 62 CF Card Format Format memory cards for use in your camera. 62 Date Set the time and date. 21–22 Auto Off Specify how long the monitor will remain on before turning off automatically to save power. 63 Language Choose the language in which camera messages and menus are displayed. 19–20 USB Choose a transfer protocol for use when your camera is connected to a computer. 64 Reset All ( mode only) Reset camera settings to their default values. 66 Minimum No Format Year, Month, Day, hour, minute, order of display for year, month, and day 30 s 1m 5m 30 m De (German) (Japanese) En (English) Es (Spanish) Fr (French) PTP Mass Storage No Reset The Playback Menu SELECT MENU OFF Delete Delete all or selected pictures. DELETE Selected Images All Images MENU OFF SELECT SET PRINT SET Print set Delete print set MENU OFF SELECT SET PROTECT SELECT SET QUICK DONE AUTO TRANSFER All ON All OFF MENU OFF SELECT SET CF CARD FORMAT WARNING ! All images will be deleted ! No Format MENU OFF SELECT SET BRIGHTNESS MENU OFF SELECT SET Pressing the MENU button when the mode selector is set to displays the PLAY BACK menu, which contains options for managing the pictures on the memory card. SET Selected Images All Images 76–77 Print Set Select pictures for printing on a DPOFcompatible device. 78–79 Protect Protect selected pictures from accidental deletion. 80 Auto Transfer Mark all pictures for transfer to a computer, or remove transfer marking from all pictures. 81 CF Card Format This option is used to format memory cards for use in your camera. 62 Brightness Adjust monitor brightness. 62 Print set Delete print set Select pictures for protection. Protected pictures are marked by a icon. All ON All OFF No Format Maximum (Five levels) Minimum 13 Introduction—Menu Guide DELETE Delete Print Set Protect Auto Transfer CF Card Format Brightness Introduction—Menu Guide The Scene Menu ( and Modes) Your Nikon digital camera offers a choice of twelve “scene” modes for common compositions. When a scene is selected from the SCENE menu, camera settings are automatically adjusted to produce optimal results for the selected scene, sparing you the necessity of adjusting camera settings one-by-one. Mode Portrait Description Use for portraits. 37 Party/Indoor Use to capture background details or the effects 37 of candlelight and other indoor lighting. Night Portrait Use when shooting portraits against a backdrop 38 of night scenery. Beach/Snow Use for bright subjects such as snowfields, beach38 es, and sunlight expanses of water. Landscape Use to enhance outlines, colors, and contrast in 38 skyscapes, forests, and other landscape shots. Sunset Use to preserve the deep hues seen in sunsets and 39 sunrises. Night Landscape Museum Use when taking landscape shots a night. 39 Use where a flash is prohibited. 39 Use to capture the expanding burst of light from 39 Fireworks Show a firework. 14 Close Up Use to capture vivid colors in close-up shots of 40 flowers, insects, and other small objects. Copy Use to copy text and line drawings from a white 40 board or from a book or other printed matter. Back Light Use when light is coming from behind your sub40 ject, throwing their features into shadow. Tutorial First Steps 16–22 Getting Started Taking Pictures 23–30 Review and Deletion This chapter is divided into the following four sections: First Steps This section details the steps you will take before using your camera for the first time. Taking Pictures Read this section for a step-by-step guide to the basics of taking pictures with the COOLPIX 3500. 31–35 Getting Creative 36–40 Review and Deletion Learn how to review and delete pictures while setting up your next shot. Getting Creative Explore the creative possibilities of scene mode. 15 First Steps Getting Ready to Use Your Camera Before using your camera for the first time, you will need to complete the steps shown below. Tutorial—First Steps STEP 1 Attach the Camera Strap 16 STEP 2 Insert the Battery and Memory Card 16–18 STEP 3 Choose a Language 19–20 STEP 4 Set the Time and Date 21–22 Step 1—Attach the Camera Strap To ensure that the camera is not dropped and damaged, attach the strap as shown and wear it around your neck while using or carrying the camera. Adjust to length shown if wearing around neck Step 2—Insert the Battery and Memory Card Your camera is powered by a rechargeable Nikon EN-EL2 lithium-ion battery, which can be charged using the MH-60 battery charger provided with the camera. To store pictures, your camera uses CompactFlash™ memory cards. 2.1 Charge the battery The EN-EL2 lithium-ion battery supplied with your camera is not fully charged at shipment. We recommend that you charge the battery before use. Instructions for charging the battery may be found in the instruction manual included with the battery charger. Alternative Power Sources To power your camera continuously for extended playback or while the camera is connected to a computer, we recommend the EH-60/EH-60S AC adapter kit (available separately; 87). 16 Turn the camera off Before inserting or removing the battery or memory card, be sure the mode selector is in the “OFF” position. 2.3 Open the battery-chamber/memory card slot cover Slide the cover latch in the direction of the icon (A1) until the red dot is visible (A2), indicating that the cover is unlatched. Slide the cover out (B) and flip it open (C). A B EN- EL 2 EN-EL 2 Insert the battery and memory card Insert a fully-charged EN-EL2 battery with the “+” and “–” contacts oriented as shown in the label on the underside of the batterychamber/memory card slot cover (A). Insert the memory card as shown in the label at the entrance to the memory card slot (B), sliding it in until it is firmly in place and the eject button pops up (the card is fully inserted when the top of the card is level with the top of the eject button). C EN- EL 2 2.4 B EN- EL 2 A Read Battery Warnings Read and follow all warnings and instructions supplied by the battery manufacturer. Formatting Memory Cards The memory card supplied with your camera is formatted at shipment. Other memory cards, however, must be formatted before first use. For information on formatting memory cards, see “Camera Setup: CF Card Format” ( 62). 17 Tutorial—First Steps 2.2 2.5 Tutorial—First Steps Close the battery-chamber/memory card slot cover Close the battery chamber/memory card slot cover (A, B) and slide the latch in the direction of the icon until the red dot is hidden, indicating that the cover is latched (C). To prevent the battery or memory card being dislodged during operation, be sure that the cover is securely latched. A B C Removing the Battery EN- EL 2 The battery can be removed without affecting pictures on the memory card. Before removing the battery, turn the camera off. Remove the battery by hand, holding it between your finger and thumb as shown at right. Do not use your fingernails. The Clock Battery The camera’s internal clock-calendar is powered by a separate, rechargeable power source, which is charged as necessary when the main battery is installed. If the camera has been stored for an extended period with the main battery removed, the clock may need to be reset. The clock power source can provide several days of back-up power after charging for about ten hours. Removing the Memory Card Memory cards can be removed without loss of data when the camera is off. When removing memory cards, turn the camera off and open the battery chamber/memory card slot cover (1). Press the eject button to partially eject the card (2), and then remove the card by hand. 18 1 2 Step 3—Choose a Language 3.1 3.2 IMAGE QUALITY MENU OFF Slide mode selector to 3.3 3.4 SHOOTING MENU MENU OFF SELECT SET Highlight page tab 3.5 SELECT SET SET-UP Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT SET Highlight SET-UP menu page tab ( 3.6 BRIGHTNESS Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT Press MENU button to display menu for current shooting mode SET Position cursor in SET-UP menu ) LANGUAGE Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT SET Highlight Language 19 Tutorial—First Steps Camera menus and messages can be displayed in your choice of German, English, French, Japanese, and Spanish. 3.7 3.8 Tutorial—First Steps LANGUAGE Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT SET Display options 3.9 SELECT SET Return to SET-UP menu. If you have yet to set the time and date, proceed to Step 4.6 on the following page to set the time and date. 20 MENU OFF SELECT Choose a language from: De Deutsch (German) En English Fr Français (French) Japanese Es Español (Spanish) LANGUAGE Brightness CF Card Format Date Auto Off Language USB MENU OFF LANGUAGE Brightness CF Card Format Date Auto Off Language USB SET Step 4—Set the Time and Date 4.1 4.2 IMAGE QUALITY MENU OFF Slide mode selector to 4.3 SELECT 4.4 SET Highlight page tab 4.5 SELECT SET-UP Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT SET Highlight SET-UP menu page tab ( 4.6 BRIGHTNESS Brightness CF Card Format Date Auto Off Language USB MENU OFF SET Press MENU button to display menu for current shooting mode SHOOTING MENU MENU OFF SELECT SET Position cursor in SET-UP menu ) DATE Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT SET Highlight Date 21 Tutorial—First Steps Information on the time and date of recording is included with all pictures taken with your Nikon digital camera. To set the camera’s internal clock to the correct time and date: 4.7 4.8 DATE Tutorial—First Steps MENU OFF SELECT SET Display DATE menu 4.9 SELECT MENU OFF 4.10 SET SELECT SET Choose order in which year, month, and day will be displayed SELECT SET Highlight Y M D 4.12 DATE MENU OFF SET DATE MENU OFF Edit selected item. Repeat steps 4.8– 4.9 until all items have been set. 4.11 SELECT Highlight Year, Month, Day, hour, or minute (selected item blinks on and off in green) DATE MENU OFF DATE DATE Brightness CF Card Format Date Auto Off Language USB MENU OFF SELECT SET Save changes to settings and return SET-UP menu Any pictures taken before the time and date have been set will have a time stamp of “0000.00.00 00:00.” If the time and date have not been set, a flashing (“Date not set”) icon will be displayed in the top right corner of the monitor when the camera is in mode. 22 Taking Pictures The Basics STEP 1 Ready the Camera STEP 2 Choose STEP 3 Adjust Settings (Optional) STEP 4 Frame the Picture 26–27 STEP 5 Focus and Shoot 28–29 STEP 6 Put the Camera Away Mode 23–24 25 26 30 Step 1—Ready the Camera 1.1 Turn the lens section to shooting position Rotate the lens as shown. 1.2 Slide the mode selector to When you slide the mode selector from OFF to , the flash-ready lamp under the monitor will light and the monitor will display a welcome message. The Lens Section When adjusting the angle of the lens, rotate the lens section slowly; do not use excessive force. Care should be taken to avoid catching fingers, hair, or clothing between the lens section and the camera body. 23 Tutorial—Taking Pictures This section details the basic steps involved in taking pictures in mode. In this automatic, “point-and-shoot” mode, the majority of camera settings are controlled by the camera in response to shooting conditions, producing the best possible results in most situations. 1.3 Tutorial—Taking Pictures Check indicators in the monitor Before shooting, check the battery level (A) and number of exposures remaining (B). A 2048 NORMAL B 15 Battery Level (A) The battery level is displayed as follows: Display NO ICON WARNING ! ! BATTERY EXHAUSTED Meaning Camera status Battery fully charged Camera functions normally. Low battery Recharge or replace battery without delay. Battery exhausted No pictures can be taken until battery has been recharged or replaced. Number of Exposures Remaining (B) If the number of exposures remaining is zero, a message will be displayed in the monitor. In this case, delete pictures ( 33–34), use a new memory card, or choose a lower quality or image size ( 50). 24 Step 2—Choose Mode 2.2 2048 NORMAL 15 Press multi selector down to display shooting-mode menu* 2.3 2048 NORMAL 15 2048 NORMAL 15 Select (selected option is highlighted in green) Press multi selector to right to exit menu (if no operation is performed for about two seconds, menu will close and original setting will be restored). Current shooting mode is shown by icon at top left corner of monitor. *When you press the multi selector down to display the shooting-mode menu, the current shooting mode will be highlighted. If mode is already selected, press the multi selector to the right to exit the menu. 25 Tutorial—Taking Pictures 2.1 Step 3—Adjust Camera Settings (Optional) Tutorial—Taking Pictures The following table shows the default settings for mode. For more information, refer to the page numbers in the rightmost column. Setting Default Description Flash mode Auto Flash fires automatically when lighting is poor. Self timer Off Image quality Self-timer off. 43 45–46 Pictures compressed for balance between NORMAL quality and file size that is ideal for snapshots. 51 Image size 2048 Pictures are 2,048 × 1,536 pixels in size. 52 Exp. +/– ±0 No exposure compensation performed. 53 Step 4—Frame the Picture 4.1 Adjust the lens angle The lens section can be rotated 130° forward from its housing in the camera body, and 90° back toward the monitor. To frame a quick arms-length selfportrait, rotate the lens to point in the same direction as the monitor (in this position, the monitor will show a mirror image of what will appear in the final photograph). Forward Back (toward monitor) 0° 50° 50° 90° 130° Range of rotation Shooting position When the lens is obscured by the camera body, a warning will be displayed in the monitor and pictures can not be taken. To clear the message from the monitor, rotate the lens section to shooting position. 26 Ready the camera Hold the camera steadily in both hands. 4.3 Frame your subject Use the zoom buttons to frame your subject against the background. Indicator in monitor shows amount of zoom while either button is pressed Zoom out Zoom in 2048 NORMAL 15 When the camera is zoomed all the way in, holding the button down for about two seconds extends the zoom range digitally (digital zoom; 47). The zoom indicator turns yellow when digital zoom is in effect. Don’t Block the Shot To avoid dark or partially obscured pictures, keep your fingers and other objects away from the lens and flash window. Smear When you frame bright subjects, vertical comet-like streaks that whiten toward either end may appear in the monitor. This phenomenon, known as “smear,” does not appear in the final photograph and does not indicate a malfunction. Some smearing may appear in movies. 27 Tutorial—Taking Pictures 4.2 Step 5—Focus and Shoot Tutorial—Taking Pictures 5.1 Focus Press the shutter-release button halfway to set focus and exposure. The camera will focus on the subject closest to the camera, and lock focus at this distance while the shutter-release button is pressed halfway. With the shutter-release button pressed halfway, check the focus indicator and flash-ready lamp. 2048 NORMAL 15 Focus indicator lights when shutter-release button is pressed halfway Flash-ready lamp Focus indicator Green Flashes red On Flashready lamp Flickers Off Subject in focus. Camera unable to focus. Change your composition and try again. Flash will fire when picture is taken. Flash charging. Remove finger briefly from shutter-release button, then try again. Flash off or not required. When Lighting Is Poor If lighting is poor, the view through the camera lens may appear slightly “grainy” when viewed in the monitor. 28 5.2 Tutorial—Taking Pictures Take the picture Smoothly press the shutter-release button the rest of the way down to take a picture. After each shot, the picture you have just taken will be displayed briefly in the monitor before being recorded to the memory card. If you are not satisfied with the results, you can delete the picture instantly by pressing the ( ) button. If you need more time to study the picture, you can pause the display for up to ten seconds by pressing the ( ) button. For more information, see “Keep or Delete” ( 48). Getting Good Results with Autofocus Autofocus performs best when there is contrast between the subject and background and the subject is evenly lit. It does not perform well if the subject is very dark or moving rapidly, if there are objects of sharply differing brightness in the scene (e.g., the sun is behind your subjects and their features are in deep shadow), or if the subject contains objects at different distances from the camera (e.g., the subject is inside a cage). During Recording While pictures are being recorded to the memory card, a played in the monitor. icon will be dis- Pictures taken while earlier images are being recorded are stored in a temporary memory buffer. When the buffer is full, an hourglass ( ) icon will be displayed and the shutter release will be disabled. Do not turn the camera off, remove the memory card, or remove or disconnect the power source while or is displayed. 29 Step 6—Put the Camera Away Tutorial—Taking Pictures 6.1 Turn the camera off Turn the camera off to save battery power. 6.2 Return the lens section to the closed position To protect the lens, return the lens section to its housing in the camera body. 30 Review and Deletion Quick Review mode. Press the butTo use quick review, the camera must be in ton once to display the most recent picture at the top left corner of the monitor, twice to display pictures full screen. Pressing the button a third time returns you to mode. 1 14 2048 NORMAL Mode 2048 NORMAL 14 Quick Review Pictures are displayed in the top left corner of the monitor, allowing you to view the results of previous attempts while setting up your next shot. 2048 NORMAL 1/0011 Full-Screen Review Pictures are displayed full screen or in menus of four or nine “thumbnail” images. You can zoom in on and delete individual pictures. 31 Tutorial—Review and Deletion Using the quick review function on your Nikon digital camera, you can view the results of earlier attempts while setting up the next shot, and use what you see to change camera settings or to choose a better angle. Once you have the shot you want, you can delete your failures instantly to make room for more shots on the memory card. Quick Review Tutorial—Review and Deletion The following operations can be performed in quick review: 1 2048 NORMAL To Press 14 Description View other pictures Press the multi selector up to view pictures recorded before the current photo, down to view pictures recorded after the current photo. View current picture full screen Enter full-screen review (see below) with the current picture displayed full screen. Return to shooting mode Shutter To return to shooting mode, press the shutrelease ter-release button halfway. All other camera controls function as they do in shooting mode. Full-Screen Review The following operations can be performed in fullscreen review: 2048 NORMAL To View other pictures 32 Press 1/0011 Description Press the multi selector up to view pictures recorded before the current photo, down to view pictures recorded after the current photo. Keep multi selector pressed to scroll rapidly to the desired frame number. Press View multiple pictures ( Delete current picture Description Press the ( ) button to display up to ) nine pictures at a time as small thumbnail previews (see following page). A confirmation dialog will be displayed. Press multi selector up or down to highlight option, press to right to select. • Select No to exit DELETE without deleting picture • Select Yes to deNo Yes lete picture ( ) SELECT ( Zoom photo in Select current picture for transfer to a computer Hide or display photo info Return to mode ( SET Press the ( ) button for an enlarged view of the current photo ( 71). While the pho) to is zoomed in, use the multi selector to view areas not visible in the monitor. To cancel zoom, press . ) Pictures selected for transfer are marked with a icon. Turn this marking on or off to select the pictures that will be transferred to a computer at a later date ( 82). Press multi selector to left to hide or display photo info superimposed on picture in monitor ( 7). Shutter To end review and return to shooting mode, release/ press the button or press the shutterrelease button halfway. 33 Tutorial—Review and Deletion To Thumbnail Review Tutorial—Review and Deletion Pressing the ( ) button in full-screen review displays a menu of four thumbnail images. The following operations can be performed while thumbnails are displayed: To Press Description Highlight pictures Press the multi selector up, down, left, or right to highlight thumbnails. Change number of pictures displayed With four thumbnails displayed, press the button once to view nine thumbnail images. Press ( ) to “zoom in” from nine thumb( )/ nails to a four-thumbnail view or, when four ( ) thumbnails are displayed, to view highlighted picture full size. Delete highlighted picture ( ) A confirmation dialog will be displayed. Press multi selector up or down to highlight option, press to right to select. • Select No to exit DELETE without deleting picture • Select Yes to deNo Yes lete picture SELECT Select highlighted picture for transfer to a computer Return to mode 34 ( ) SET Pictures selected for transfer are marked with a icon. Turn this marking on or off to select the pictures that will be transferred to a computer at a later date ( 82). Shutter To end review and return to shooting mode, release/ press the button or press the shutterrelease button halfway. Playback Mode ( 67) 35 Tutorial—Review and Deletion This section describes quick review, which allows you to view pictures without leaving mode. To learn about additional playback options available in (playback) mode, see “Playing Pictures Back” ( 67). Getting Creative Scene Selection Tutorial—Getting Creative Your Nikon digital camera offers a choice of “scene” modes for common compositions, such as portraits, landscapes, and close-ups, which require special combinations of settings that apply to any scene of the same type. When a scene is selected from the SCENE menu, camera settings are automatically adjusted to produce optimal results for the selected composition, sparing you the necessity of adjusting camera settings one-by-one. and modes (for information on Scene selection is only available in 23). To choose choosing a shooting mode, see “Tutorial: Taking Pictures”; a scene: 1 2 Portrait SELECT SET Press SCENE button to display menu of scene choices 3 SET Make selection (chosen scene takes effect when option is highlighted; highlighted scene shown by icon and caption in monitor) Press SCENE button to return to shooting mode (selected scene shown by icon in monitor) 2048 NORMAL 36 SELECT 15 The following pages describe when to use each scene mode. Portrait Use for portraits. Main subject stands out clearly while background details are softened, lending the composition a sense of depth. • Flash mode set to (auto with red-eye reduction); other modes can be selected ( 43). • Degree to which background details are softened depends on the amount of light available. Party/Indoor Use for shots that include details of the background behind the main subject, or to capture the effects of candlelight and other indoor background lighting. • Flash mode set to be selected ( 43). (auto with red-eye reduction); other modes can Camera Shake: ✯ Camera Shake At slow shutter speeds, a icon appears in the monitor. Pictures taken at these speeds may be blurred by inadvertent camera movement (“camera shake”). While use of a tripod is recommended when this icon is displayed, other methods that may be successful in preventing blurring at a given setting are indicated by the number of stars in the “Camera Shake” rating: ✯ Support the camera steadily in both hands with your elbows against your torso. ✯✯ Place the camera on a flat, level surface such as a wall or table. 37 Tutorial—Getting Creative In scene mode, you can adjust flash ( 43) and self-timer ( 45) settings (restrictions may apply depending on the scene selected). Pressing the MENU button will display the SHOOTING menu ( 49). To return to or mode, select OFF in the SCENE menu. Night Portrait Tutorial—Getting Creative Use for shots that provide a natural balance between the main subject and the background when shooting portraits against a backdrop of night scenery. • Flash mode fixed at (auto with red-eye reduction; 43). Camera Shake: ✯ Beach/Snow Vividly captures the brightness of such subjects as snowfields, beaches, or sunlight expanses of water. • Flash mode set to AUTO; other modes can be selected ( 43). Landscape Use for vivid landscape shots that enhance outlines, colors, and contrast in such subjects as skyscapes and forests. • Flash turns off ( ) automatically. • Focus is fixed at infinity, allowing the camera to focus on distant scenes through foreground objects such as a window or a screen of branches. The focus indicator (AF●) is not displayed. Noise Reduction “Noise” in the form of randomly-spaced, brightly-colored pixels tends to appear in pictures taken at slow shutter speeds. This effect is particularly noticeable in dark areas of the picture. At settings of Night Portrait and Night Landscape, pictures taken at slow shutter speeds are processed to reduce noise before being saved to the memory card. As result, more time is required to save pictures to the memory card. 38 Sunset Camera Shake: ✯ Night Landscape A slow shutter speed is used to produce stunning night landscapes. • Focus is fixed at infinity; the focus indicator (AF●) is not displayed. • Flash turns off ( ) automatically. Camera Shake: ✯✯ Museum Flash turns off ( ) automatically. Use indoors where flash photography is prohibited (for example in museums and art galleries) or in other settings in which you do not want to use the flash. • The Best Shot Selector (BSS; 57) turns on automatically, reducing the effects of inadvertent camera movement. • Photography may be prohibited altogether in some settings. Be sure to obtain permission first. Camera Shake: ✯ Fireworks Show Slow shutter speeds are used to capture the expanding burst of light from a firework. The camera responds more rapidly to the shutter-release button, ensuring that you can capture the start of the burst. • Focus is fixed at infinity; the focus indicator (AF●) is not displayed. • Flash turns off ( ) automatically. • Follow the firework as it ascends and press the shutter-release button all the way down at the start of the burst. • Self-timer can not be used ( 45). Camera Shake: ✯✯ 39 Tutorial—Getting Creative Preserves the deep hues seen in sunsets and sunrises. Flash turns off ( ) automatically. Close Up Tutorial—Getting Creative Camera is set to focus on objects as close as 4 cm (1.6˝) from the lens, making it possible to capture vivid colors in close-up shots of flowers, insects, and other small objects, with the background artistically blurred. • Flash mode set to AUTO; other modes can be selected ( 43). • Camera automatically selects middle zoom position for a minimum focus distance of 4 cm/1.6˝ (measured from lens). Minimum focus distance will increase if camera is zoomed in or out. • Camera focuses on subject at center of frame. Camera Shake: ✯ Copy Provides clear pictures of text or drawings on a white board, business card, or in other printed matter. • Flash mode set to (off); other modes can be selected ( 43). • Colored text and drawings may not show up well in the final picture. Back Light Use when light is coming from behind your subject, throwing their features into shadow, or when your subject is in the shade but the background is brightly lit. The flash will fire automatically to “fill in” (illuminate) shadows. • Flash mode fixed at (fill flash; 43). OFF SELECT 40 SET Select this item to return to the shooting mode ( or ) in effect when scene mode was selected. The mode last in effect will be displayed in the monitor when this option is highlighted. Beyond Point-andShoot Taking Pictures 42–48 The Details Fine-Tuning Camera Settings 49–58 In “Tutorial: Taking Pictures,” you learned the basic mode. order of operations for taking pictures in This chapter details the options available for taking pictures in all shooting modes. It is divided into the following sections: Beyond Point-and-Shoot Read this section for advice on the most frequentlyused camera controls, including shooting-mode and scene selection, flash mode, the self-timer, and zoom, as well as for information on the operations that can be performed while pictures are displayed in the monitor after shooting. Fine-Tuning Camera Settings This section details the options available in the SHOOTING menu. 41 Beyond Point-and-Shoot Camera Controls , , or Movie: Choosing a Shooting Mode Taking Pictures—Beyond Point-and-Shoot mode, you have a choice of four basic shooting modes (for In information on choosing a shooting mode, see “Tutorial: Taking Pictures”; 23): Auto Auto produces good results in a wide range of situations. Use for snapshots or when you want control over image quality ( 51), image size ( 52), and exposure compensation ( 53) while leaving the camera in charge of other settings. Choose this mode for complete control over all camera settings, including white balance ( 54), sharpening ( 58), and BSS ( Manual 57). You can also choose to take pictures in continuous sequence while the shutter-release button is held down ( 56). This mode is used to record silent movies 320 × 240 pixels in size (QVGA) at a rate of about fifteen frames per second. Recording begins when the shutter-release button is pressed all the way down and ends when the shutter-release button is fully pressed a second time. • In place of the number of exposures remaining, the exposurecount display in monitor shows the length of the movie that can be recorded. Movie • Movie ends automatically after 35 seconds or when no more space is available on the memory card. • Movies are stored as QuickTime movie files ending in “.MOV”. • The flash turns off ( ) automatically. • Menus and scene-selection are disabled in movie mode • If the lens is rotated to point in the same direction as the monitor during recording, the display in the monitor will be inverted and the movie will be recorded upside down. Pressing the SCENE button in or mode displays a menu of twelve “scenes,” where you can choose an option suited to your subject and composition and let the camera adjust settings for best results. For more information, see “Tutorial: Getting Creative” ( 36). 42 AUTO Flash Photography: The Button Mode AUTO Auto Auto with red-eye reduction How it works When to use it Flash fires when Best choice in most circumstances. lighting is poor. Pre-flash fires before main flash. This causes subjects’ pupils to contract before photo is taken, minimizing “red-eye” effect caused by flash reflecting from retina. Use for portraits (works best when subjects are well within range of flash and looking at pre-flash). Because a slight delay occurs after the shutter-release button is fully pressed to allow the preflash to take effect, this setting is not recommended with erratically-moving subjects or in other situations in which you want the camera to react quickly. Use when subject is outside range of Flash will not fire flash, to capture natural lighting under Flash Cancel even when lighting dim light, or where use of a flash is pro(off) is poor. hibited. Use of a tripod is recommended to prevent blurring. Flash fires whenev- Use to “fill-in” (illuminate) shadows and Anytime Flash er picture is taken. back-lit subjects. (fill flash) The Flash-Ready Light A short pause is required between exposures for the flash system to charge. If the shutter-release button is pressed halfway while the flash is charging, the flash-ready light under the monitor will flicker. Remove your finger briefly from the shutter-release button and try again. 43 Taking Pictures—Beyond Point-and-Shoot In mode, the button controls the flash. Four flash modes are available (restrictions may apply in scene mode; 36): The flash mode can be selected with the Taking Pictures—Beyond Point-and-Shoot 1 button: 2 AUTO 2048 NORMAL AUTO 15 Press button to display flash-mode menu 2048 NORMAL 15 Press multi selector up or down until desired mode is highlighted 3 Press multi selector to right to exit menu (flash-mode menu will also close if no operation is performed for about two seconds). Current flash mode is shown by icon at bottom of monitor. 2048 NORMAL 15 The ISO (Sensitivity Gain) and (Camera Shake) Icons When lighting is poor and the flash is off ( ), the camera will automatically raise its sensitivity to light for faster exposures, minimizing blur caused by camera shake. When sensitivity is raised above the default value, an ISO icon will appear in the monitor to warn that “noise” may appear in the final picture. If the shutter speed required for exposure is very slow, a (camera shake) icon will appear in the monitor. Use of a tripod or support is recommended. 44 ON OFF Delaying Shutter Release: Choosing a Self-Timer Mode To use the self-timer: the camera 1 Position Mount the camera on a tripod (recommended) or rest it on a flat, stable surface. the self-timer on 2 Turn The self-timer setting is controlled with the multi selector. 2.1 2.2 ON OFF 2048 NORMAL ON OFF 15 15 Press multi selector up or down to highlight ON Press multi selector up to display self-timer menu 2.3 2048 NORMAL 2048 NORMAL 15 Press multi selector right to exit menu (if no operation is performed for about two seconds, menu will close and original setting will be restored). When timer is on, self-timer icon is displayed in monitor. 45 Taking Pictures—Beyond Point-and-Shoot When the self-timer is on, pictures will not be taken until ten seconds after the shutter-release button is pressed all the way down, giving you time to position yourself in front of the camera when taking pictures in which you want to appear yourself. When taking low-light or close-up shots with the flash off, the self-timer can be used to prevent pictures from being blurred by camera movement that occurs when the shutter-release button is pressed. the picture 3 Compose Adjust camera settings and frame the picture. Remember that the camera the timer 4 Start Press the shutter-release button all the way down to lock focus and activate the timer. Count-down timer in monitor shows number of seconds remaining until picture is taken Full press 2048 NORMAL 15 II I II II The self-timer lamp on the front of the camera will start to blink when the shutter-release button is pressed, and continue to blink until one second before the photo is taken. The selftimer lamp will stay lit during the final second to warn that the shutter is about to be released. To stop the timer before a picture is taken, press the shutter-release button. IIII Taking Pictures—Beyond Point-and-Shoot will focus on the closest object; compose your picture with no other objects between your subject and the camera. 5.6-16.8mm1:2.7-4.8 Restrictions on the Self-Timer The self-timer is not available in movie mode ( Show ( 39) is selected in scene mode. 42) or when Fireworks Digital Zoom The Multi-shot 16 option in the Continuous menu ( when digital zoom is in effect. 46 56) is not available Framing Pictures: Optical and Digital Zoom Optical Zoom Photos can be framed in the monitor using the zoom buttons. Indicator in monitor displays amount of zoom while either button is pressed Zoom out Zoom in Optical zoom is not available in movie mode, although digital zoom can be used to magnify the subject up to about 3 ×. Digital Zoom At the maximum optical zoom position, holding the seconds triggers digital zoom. Maximum optical zoom position Hold for 2 s button down for two Zoom indicator turns yellow in digital zoom range The camera can be zoomed in and out in the digital zoom range by pressing and buttons. To restore ordinary optical zoom, press until the the zoom indicator turns white. In digital zoom, data from the camera’s image sensor are processed digitally, enlarging the center portion of the picture to fill the frame. Unlike optical zoom, digital zoom does not increase the amount of detail visible in the picture. Instead, details visible at maximum optical zoom are enlarged, producing a slightly “grainy” image. While digital zoom is in effect, the camera focuses on the subject in the center of the frame, even if objects in other areas of the frame are closer to the camera. 47 Taking Pictures—Beyond Point-and-Shoot Your Nikon digital camera offers two kinds of zoom: optical zoom, in which the camera’s telescoping lens can be used to magnify the subject up to 3 ×, and digital zoom, in which digital processing is used to further magnify the image up to 4 ×. Keep or Delete: Picture Review Taking Pictures—Beyond Point-and-Shoot After each shot, the picture you have just taken will be displayed briefly in the monitor until being recorded to the memory card. The following operations can be performed while the picture is displayed: To Delete picture Press Description A confirmation dialog will be displayed. Press multi selector up or down to highlight option, press to right to select. • Select No to save picture and DELETE return to shooting mode • Select Yes to delete picture No Yes SELECT Pause display 48 SET Display will be paused for ten seconds and pause icon ( ) will change to . During this time, you can press ( ) to record picture and return to shooting mode, or press to delete photo as described above. Picture will be recorded automatically if no operations are performed for ten seconds. Fine-Tuning Camera Settings The -Mode Menu In mode, changes to some settings are made with the help of a SHOOTING menu that appears when the MENU button is pressed. 1 2 IMAGE QUALITY MENU OFF Slide mode selector to 3 4 IMAGE QUALITY MENU OFF SELECT SET SELECT SELECT SET Display options 6 IMAGE QUALITY FINE NORMAL BASIC MENU OFF IMAGE QUALITY FINE NORMAL BASIC MENU OFF Highlight menu item 5 SET SELECT Press MENU button to display menu for current mode SET Highlight option (to return to previous menu, press multi selector to left) IMAGE QUALITY MENU OFF SELECT SET Make selection To exit the menu and return to shooting mode, press the MENU button. 49 Taking Pictures—Fine-Tuning Camera Settings To make selections from the SHOOTING menu: The options available in the SHOOTING menu depend on the shooting mode selected. No menu is available in movie mode. Taking Pictures—Fine-Tuning Camera Settings SHOOTING MENU MENU OFF SELECT Option IMAGE QUALITY 51 IMAGE SIZE 52 EXP. +/– 53 SET Shooting menu , scene) ( SHOOTING MENU Option IMAGE QUALITY MENU OFF SELECT Shooting menu ( mode) SET 51 IMAGE SIZE 52 WHITE BALANCE 54–55 EXP. +/– 53 CONTINUOUS 56 BEST SHOT SELECTOR 57 IMAGE SHARPENING 58 Making Effective Use of Memory: Image Quality and Size Together, image quality and size determine how much space each picture occupies on the memory card, which in turn determines the total number of pictures that can be stored. The current image size and quality are shown in the monitor. 2048 NORMAL 50 15 16-MB memory card 32-MB memory card 2048 1600 1280 1024 640 2048 1600 1280 1024 640 FINE 10 16 24 37 86 20 NORMAL 19 31 BASIC 37 59 47 69 144 39 86 121 229 75 32 49 75 172 62 94 138 287 117 172 242 457 *Figures are approximate. File size of JPEG images depends on scene recorded, producing wide variations in number of images that can be stored. Image Quality To reduce the amount of memory that each shot IMAGE QUALITY occupies, pictures are compressed as they are saved to the memory card. Compression selectively reduces the quality of the image; the more the picture is compressed, the more noticeable this loss of quality is likely to be (the actual effect depends SET SELECT MENU OFF on the size of the picture when printed or displayed and on the type of subject). The image-quality menu allows you to choose the amount of compression performed. Option Compression ratio (approx.) Description FINE 1:4 Fine image quality, suitable for enlargements or high-quality prints. NORMAL 1:8 Normal image quality, suited to most applications. BASIC 1 : 16 Basic image quality, suitable for pictures that will be distributed by e-mail or used in web pages. 51 Taking Pictures—Fine-Tuning Camera Settings To get an idea of how different settings for image quality and size affect the number of pictures that can be stored, view the table below, which shows the approximate number of pictures that can be stored on 16- and 32-megabyte memory cards at different combinations of image quality and size. Image Size Taking Pictures—Fine-Tuning Camera Settings Image size refers to the physical dimensions of the image, measured in pixels. Choose an image size according to the space available on the memory card and the task at hand. IMAGE SIZE MENU OFF SELECT SET Option Size (pixels) Description 2048 2,048 × 1,536 Suited to print sizes of up to A4 (roughly 10˝ × 8˝). 1600 1,600 × 1,200 Suited to print sizes ranging from large photo album through to A5 (roughly 8˝ × 6˝). 1280 1,280 × 960 Suited to postcard-size prints. 1024 Suited to printing at smaller sizes (for exam1,024 × 768 ple, as an illustration in a letter or report), or to display on monitors 17˝ or larger. 640 640 × 480 Can be displayed full screen on 13˝ monitors. Suited to distribution by e-mail or the web. Print sizes assume a printer resolution of approximately 200 dpi. Print Size The size of pictures when printed depends on the resolution of the printer (the higher the resolution, the smaller the final print size). 52 Adjusting Exposure: Exp. +/– The Exp. +/– (exposure compensation) menu allows you to alter exposure from the value suggested by the camera, making pictures brighter or darker. EXP.+/– SELECT SET At values other than ±0, exposure compensation is shown in the monitor. 2048 NORMAL +0.3 15 53 Taking Pictures—Fine-Tuning Camera Settings MENU OFF Keeping Colors True: White Balance Taking Pictures—Fine-Tuning Camera Settings White balance is used to preserve natural colors under different types of lighting. At settings other than Auto, the current white balance setting is shown in the monitor. 2048 NORMAL Choosing a White Balance Setting In mode, white balance can be chosen from the following options (in and scene modes, white balance is adjusted automatically): WHITE BALANCE MENU OFF Option A Auto 54 SELECT SET Description White balance automatically adjusted to suit lighting conditions. Best choice in most circumstances. White Bal Preset White object used as reference to set white balance under unusual lighting conditions. Fine White balance adjusted for direct sunlight. Incandescent For use with incandescent lighting. Fluorescent For use with most types of fluorescent lighting. Cloudy Use for pictures taken under cloudy skies. Speedlight White balance adjusted to match light produced by flash. WHITE BALANCE PRESET Cancel Measure MENU OFF SELECT SET Option Description Cancel Recalls the most recent setting for preset white balance from memory and sets white balance to this value. Measure To measure a new value for white balance, place a white object, such as a piece of paper, under the lighting that will be used in the final photograph. Frame this object so that it fills the square in the center of the menu shown above. Highlight Measure and press the multi selector to the right to measure a new value for white balance (shutter will be released and camera will return to original zoom position, but no picture will be recorded). 55 Taking Pictures—Fine-Tuning Camera Settings Preset White Balance Preset white balance is used to adjust white balance when shooting under mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light). When (White Bal Preset) is selected from the white-balance menu, the camera will zoom in and the menu shown at right will be displayed in the monitor. Taking Pictures in a Sequence: Continuous Taking Pictures—Fine-Tuning Camera Settings The options in the “continuous” menu are used to take pictures in a continuous sequence. This can be useful when, for example, you are trying to capture a fleeting expression on a portrait subject, or photograph a subject that is moving unpredictably. With the Multi-Shot 16 option, you can record movement in a single picture consisting of sixteen consecutive frames. Option CONTINUOUS Single Continuous Multi-Shot 16 MENU OFF SELECT SET Description Single Camera takes one picture each time the shutter-release button is pressed all the way down. Continuous While the shutter-release button is held down, pictures are recorded at a rate of about three frames every two seconds. The camera will continue to take pictures even when the memory buffer ( 29) is full, although the rate at which pictures are recorded will drop. Each time the shutter-release button is pressed, the camera takes sixteen consecutive “thumbnail” images 512 × 384 pixels in size and combines them into a Multi-Shot 16 collage measuring 2,048 × 1,536 pixels. This option is not available at image sizes ( 52) other than 2048, or when digital zoom ( 47) is in effect. At settings other than Single, the current “continuous” setting is indicated by an icon in the monitor. 2048 NORMAL Flash, Focus Exposure, and White Balance At settings of Continuous and Multi-Shot 16, the flash turns off, and focus distance, exposure, and auto white balance are determined by the first picture in each series. 56 Getting Sharper Pictures: BSS (Best Shot Selector) BEST SHOT SELECTOR On Off MENU OFF SELECT SET BSS may not produce the desired results with a moving subject or if you change the composition while the shutter-release button is pressed all the way down. Option Description On Camera takes photos as long as the shutter-release button is held down, to a maximum of ten. These images are then compared and the sharpest photo (the image with the highest level of detail) saved to the memory card. The flash turns off, and focus distance, exposure, and auto white balance are determined by the first photograph in the series. Off BSS off; camera functions normally. When BSS is on, a BSS icon appears in the monitor. 2048 NORMAL 15 Restrictions on BSS BSS is not available at CONTINUOUS settings other than Single. Selecting Continuous or Multi-Shot 16 automatically cancels BSS. 57 Taking Pictures—Fine-Tuning Camera Settings The “Best Shot Selector” (BSS) is recommended for situations in which inadvertent camera movement can produce blurred pictures, for example when: • the camera is zoomed in • the flash can not be used although lighting is poor Making Edges More Distinct: Image Sharpening Taking Pictures—Fine-Tuning Camera Settings The camera automatically emphasizes the borders between light and dark areas of each picture, making the image seem sharper. The effects are too subtle to be seen in the camera monitor, but are visible when the picture is viewed on a computer monitor or printed. mode gives you control over the amount of sharpening performed (in and scene modes, the camera adjusts sharpening according to the subject). Option IMAGE SHARPENING Auto High Norma l Low Of f MENU OFF SELECT SET Description Auto Camera sharpens edges for optimal results; adjustment performed differs from image to image. High Image processed to increase sharpness, making edges more distinct. Normal Camera performs same standard level of sharpening on all images. Low Amount of sharpening reduced below normal level. Off No sharpening performed. When taking pictures that will later be retouched, choose settings of Normal or Low. At settings other than Auto, an image-sharpening icon appears in the monitor. 2048 NORMAL 58 Camera Setup The SET-UP Menu This chapter details the options available in the SETUP menu, where you can adjust basic camera settings and perform such tasks as formatting memory cards and restoring settings to their default values. 59 Camera Setup The SET-UP menu contains options for basic camera setup. The SET-UP menu is accessed from the SHOOTING menu for , , or scene mode (no menu is available in movie mode). To make a selection from the SET-UP menu: 1 2 IMAGE QUALITY MENU OFF Slide mode selector to 3 SELECT 4 SET MENU OFF SELECT Display SET-UP menu 60 SET SELECT SET Highlight 6 BRIGHTNESS Brightness CF Card Format Date Auto Off Language USB Reset All SET-UP Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF Highlight page tab (selected page tab highlighted in green) 5 SET Press MENU button to display menu for current shooting mode SHOOTING MENU MENU OFF SELECT AUTO OFF Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT Highlight menu item SET 7 8 MENU OFF SELECT SET Display options 9 SELECT MENU OFF SELECT SET Highlight option (to return to previous menu, press multi selector to left) To exit the menu and return to shooting mode, press the MENU button. AUTO OFF Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF AUTO OFF Brightness CF Card Format Date Auto Off Language USB Reset All SET Make selection The SET-UP menu contains the following options: SET-UP Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT Option SET Brightness 62 CF Card Format 62 Date 63 Auto Off 63 Language 64 USB 64 Reset All ( only) 66 SET-UP Menu Options The Brightness and CF Card Format options can also be accessed from the playback menu in mode ( 75). 61 Camera Setup AUTO OFF Brightness CF Card Format Date Auto Off Language USB Reset All Adjusting Monitor Brightness: Brightness Camera Setup This option controls monitor brightness. Press the multi selector up or down to increase or decrease the brightness of the monitor by moving the arrow to the right of the display up or down. BRIGHTNESS MENU OFF SELECT SET Formatting Memory Cards: CF Card Format The memory card provided with your camera is formatted at shipment. If you purchase additional memory cards for added storage, you will however need to format the cards before first use to ensure that they work properly in your camera. Formatting memory cards is also an effective way of deleting all pictures on the card. CF CARD FORMAT WARNING ! All images will be deleted ! No Format MENU OFF SELECT SET Selecting CF Card Format from the setup or playback menus displays the confirmation dialog shown above. To format the memory card: 1 2 CF CARD FORMAT WARNING ! All images will be deleted ! No Format MENU OFF SELECT FORMATTING SET Highlight Format (to exit without formatting card, highlight No and press multi selector to right) Press multi selector to right to start formatting. Formatting begins immediately. While formatting is in progress, the message shown above will be displayed. During Formatting Do not remove the memory card, remove the battery, or unplug the AC adapter (available separately) while formatting is in progress. 62 Setting the Time and Date: Date This option is used to set the camera to the current date and time. For more information, see “Tutorial: First Steps” ( 21). DATE SELECT SET Conserving Battery Power: Auto Off When operated on battery power, the camera will enter sleep mode if no operations are performed for thirty seconds (or three minutes when menus are displayed). The time limit for sleep mode can be chosen from thirty seconds (30 s), one minute (1 m), five minutes (5 m), and thirty minutes (30 m) using Auto Off. AUTO OFF Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT SET Before Formatting Formatting memory cards permanently deletes all data they contain, including protected pictures and any other data that may be on the card. Before formatting, be sure to transfer to a computer any pictures you would like to keep. Sleep Mode (Auto Off) In sleep mode, the camera itself is effectively off, consuming almost no power. The camera can be reactivated by pressing the shutter-release button or sliding the mode selector to a new position. When powered by an AC adapter kit (available separately; 87), the camera will remain on for thirty minutes if no operations are performed, regardless of the setting in the Auto Off menu. 63 Camera Setup MENU OFF Choosing a Language: Language Camera Setup This option is used to choose the language in which camera menus and messages are displayed. For more information, see “Tutorial: First Steps” ( 19). LANGUAGE Brightness CF Card Format Date Auto Off Language USB Reset All MENU OFF SELECT SET Choosing a USB Protocol: USB Before pictures can be copied to a computer via direct USB connection ( 82), you will need to select a USB transfer protocol that matches that used by your computer’s operating system. The default setting is Mass Storage. USB Brightness CF Card Format Date Auto Off PTP Language Mass Storage USB Reset All MENU OFF SELECT SET Operating system USB protocol Windows XP Home Edition Windows XP Professional Choose either PTP or Mass Storage. Mac OS X (version 10.1.2 or later) Choose PTP. Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS 9 (9.0, 9.1, 9.2) Choose Mass Storage. Mac OS X Pictures can not be transferred using the camera ( ) button in Mac OS X 10.1.2. Use the button in Nikon View to transfer pictures. See the Nikon View 5 Reference Manual (on CD) for details. The camera ( ) button can be used to transfer images in Mac OS X 10.1.3 or later. 64 Do not select PTP when connecting the COOLPIX 3500 to a computer running one of the above operating systems (there is no need to change the USB setting when using the camera for the first time, as Mass Storage is selected at shipment). If you have already changed the USB setting to PTP, be sure to select Mass Storage before connecting the camera to your computer. If you have connected the camera to a computer running one of the above operating systems with PTP selected in the USB menu, disconnect the camera as described below. Be sure to select Mass Storage in the USB menu before reconnecting the camera. Windows 2000 Professional A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancel to close the dialog, and then disconnect the camera. Windows Millennium Edition (Me) After displaying a message stating that the hardware information database is being updated, the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, and then disconnect the camera. Windows 98 Second Edition (SE) The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera. Mac OS 9 (9.0, 9.1, 9.2) A dialog will be displayed stating that the computer is unable to use the driver needed for the “Nikon Digital Camera E3500_PTP” USB device. Click Cancel to close the dialog, and then disconnect the camera. 65 Camera Setup Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE), Mac OS 9 (9.0, 9.1, 9.2) Restoring Default Settings: Reset All ( Mode Only) Camera Setup Reset All is used to reset settings to their default values. This option is only available in the SET-UP menu for mode, but resets settings for all modes. RESET ALL Reset all settings to default values No Reset MENU OFF Option No Reset SET SELECT Description Exit menu, leaving settings unchanged. Restore settings to default values. Choosing Reset restores the settings listed below to their default values. Setting White balance Exposure compensation Continuous Best Shot Selector Default Setting Default Auto Image sharpening Auto ±0 Monitor brightness 3 Single Auto off 30 s Off Choosing Reset also clears the current file number ( 69) from memory. Numbering will continue from the lowest number available on the memory card. All other settings are unaffected. Resetting File Numbering to 0001 To reset file numbering ( 69) to 0001, select Reset All after either deleting all pictures ( 77) or formatting the memory card ( 62). 66 Playing Pictures Back Playback Mode Basic Playback 68–74 The Playback Menu 75–82 This section details the operations that can be performed when the mode selector is set to . It is divided into the following two sections: Basic Playback This section covers playback operations that can be performed using the buttons on the back of the camera and the multi selector. The Playback Menu Read this section for a description of the operations that can be performed in the playback menu. 67 Basic Playback Full-Frame and Thumbnail Playback Playing Pictures Back—Basic Playback When the mode selector is set to , the camera enters playback mode with the most recent picture displayed in the monitor. 2048 NORMAL 1/0011 The following operations can be performed in playback mode: To Press Description Press the multi selector up to view pictures recorded before the current photo, down to view pictures recorded after the current photo. Keep multi selector pressed to scroll rapidly to the desired frame number. View other pictures View multiple pictures Delete current picture ( ( ) ) Press the ( ) button to display up to nine pictures at a time as small thumbnail previews ( 70). A confirmation dialog will be displayed. Press multi selector up or down to highlight option, press to right to select. • Select No to exit without DELETE deleting picture • Select Yes to delete picture No Yes SELECT 68 SET Press Description Zoom photo in ( Press the ( ) button for an enlarged view of the current photo ( 71). Select current picture for transfer to a computer ( ) ) Pictures selected for transfer are marked with a icon. Turn this marking on or off to select the pictures that will be transferred to a computer at a later date ( 82). Create small SMALL If the current picture is a photograph, pressing the copy of PIC. button will create a small copy (320 × 240) current ( ) for electronic distribution ( 72). picture Play movie back If the current picture is marked with a icon to button show that it is a movie, pressing the starts and pauses movie playback ( 74). Hide or display photo info Press multi selector to left to hide or display photo info superimposed on picture in monitor ( 7). Display playback menu MENU Press the MENU button to display or hide the playback menu ( 75). Image File and Folder Names Pictures taken with the COOLPIX 3500 are identified by file names that begin with “DSCN” or, in the case of images created with the small picture function ( 72), “SSCN,” followed by a four-digit file number assigned automatically by the camera (e.g., “DSCN0001”). Each file name ends in a three-letter “extension” that identifies the type of picture: “.JPG” for photographs and “.MOV” for movies. Picture files are stored in folders created automatically by the camera and named with a three-digit folder number followed by “NIKON” (e.g., “100NIKON”). The folder name and file number can be viewed in full-screen review and full-frame playback, when they are displayed in the top right corner of the monitor ( 7). 69 Playing Pictures Back—Basic Playback To Thumbnail Review Playing Pictures Back—Basic Playback Pressing the ( ) button in full-screen review displays a menu of four thumbnail images. The following operations can be performed while thumbnails are displayed: To Press Highlight pictures Description Press the multi selector up, down, left, or right to highlight thumbnails. Change number of pictures displayed ( ( Delete highlighted picture butWith four thumbnails displayed, press the ton once to view nine thumbnail images. Press )/ ( ) to “zoom in” from nine thumbnails to a four) thumbnail view or, when four thumbnails are displayed, to view highlighted picture full size. ( ) A confirmation dialog will be displayed. Press multi selector up or down to highlight option, press to right to select. • Select No to exit withDELETE out deleting picture • Select Yes to delete picture No Yes SELECT Select highlighted picture for transfer to a computer ( ) SET Pictures selected for transfer are marked with a icon. Turn this marking on or off to select the pictures that will be transferred to a computer at a later date ( 82). Create small SMALL If the current picture is a photograph, pressing copy of highPIC. the button will create a small copy for eleclighted picture ( ) tronic distribution ( 72). 70 Taking a Closer Look: Playback Zoom X2.0 SCROLL To ZOOM Press Description ( Zoom increases each time button is pressed, to a maximum of 6.0 ×. While image is zoomed in, icon and zoom ratio are displayed in upper left corner of monitor. Zoom photo in View other areas of image Cancel zoom ) Press the multi selector to scroll to areas of the image not visible in the monitor. Press to cancel zoom. Playback Tips In single-image playback, pictures are displayed briefly at low resolution while being read from the memory card. This makes it possible to scroll rapidly through the pictures in memory without waiting for each image to be displayed at full resolution. To scroll quickly to a particular frame number without viewing the intervening pictures, press and hold the multi selector. The picture displayed will not change, but the frame number displayed at the bottom right corner of the monitor will increase or decrease rapidly. Release the multi selector when the desired frame number is reached. The first and last pictures in memory are linked. Pressing the multi selector up when the first picture in memory is displayed will take you to the last picture. Pressing the multi selector down when the last picture is displayed takes you to the first picture. 71 Playing Pictures Back—Basic Playback Use the ( ) button to zoom in on photos displayed in single-image playback (playback zoom can not be used with movies or copies created with the small picture function). Creating a Small Copy of a Picture: Small Picture Playing Pictures Back—Basic Playback Pressing the SMALL PIC. ( ) button in full-frame or thumbnail playback creates a small copy of the current picture. Copies are 320 × 240 pixels in size and have an image quality of BASIC, making them ideal for distribution by email or for use in web pages. To create a small copy of the picture currently displayed in full-frame playback, or the picture highlighted in thumbnail playback: 1 2 Small Pic Creating small Picture file ? Creating small Picture file ? Yes No Yes No SELECT SET Press SMALL PIC. ( ) button to display confirmation dialog 3 SELECT SET Highlight Yes (to exit without creating copy, highlight No and press multi selector to right) 4 2048 NORMAL 1/0011 Create small copy and return to playback mode with original picture displayed 72 Small Pic 2/0012 To view copy, press multi selector down. Copy will have same time and date of creation as original. When displayed in full-frame playback and full-screen review, copies will occupy roughly one-quarter of the monitor and are surrounded by a gray frame. In thumbnail playback and review, copies are indicated by a gray border. Copies can not be viewed using playback zoom ( 71); pressing the ( ) button when a copy is displayed has no effect. Restrictions on Small Picture The small picture function described in this section can not be used in quick review. Copies can not be created from movies. Additional copies of an image can not be created from a small picture file; pressing the SMALL PIC. ( ) button when a copy is displayed will have no effect. Pressing the SMALL PIC. button will also have no effect if there is not enough space for the copy on the memory card. The COOLPIX 3500 may not be able to create small copies from images taken with another make of camera. Viewing Small Picture Files on Other Cameras Copies created with the small picture function may not display correctly when viewed on other models of Nikon digital camera. You may also not be able to transfer copies from other models of Nikon digital camera to a computer. 73 Playing Pictures Back—Basic Playback Once created, copies are independent of the original: deleting a copy has no effect on the original, deleting the original no effect on the copy. Copies are stored on the memory card as independent files with names of the form “SSCNnnnn.JPG,” where “nnnn” is a four-digit number assigned automatically by the camera. Copies will have the same transfer marking as the originals; print and protect attributes, however, must be set separately. Movie Playback Playing Pictures Back—Basic Playback Movies are indicated by a icon. In full-frame playback, movies can be viewed using the button. Movies can not be played back when thumbnails are displayed. START To Press 9/0019 Description Start playback When movie ends, final frame is displayed for one second, followed by a still image of the first frame. Pause/resume playback Pressing the button while playback is in progress pauses display. To resume playback, press the button again. Rewind movie one frame When movie is paused, pressing the multi selector up rewinds the movie one frame. Advance movie one frame When movie is paused, pressing the multi selector down advances the movie one frame. If the last frame of the movie is displayed, pressing the multi selector down ends movie playback and displays the first frame of the movie. Inverted Playback Movies recorded with the lens pointing in the same direction as the monitor will be played back upside down. 74 The Playback Menu Managing Pictures To view the playback menu: 1 2 DELETE Delete Print Set Protect Auto Transfer CF Card Format Brightness MENU OFF Select SET SELECT Press MENU button to display playback menu The playback menu contains the following options: DELETE Delete Print Set Protect Auto Transfer CF Card Format Brightness MENU OFF SELECT Option SET Delete 76–77 Print Set 78–79 Protect 80 Auto Transfer 81 CF Card Format 62 Brightness 62 Memory Card Format/Brightness The CF Card Format and Brightness options can also be accessed from the SET-UP menu for mode. These options are described in “Camera Setup” ( 59). 75 Playing Pictures Back—The Playback Menu The playback menu contains options for deleting pictures and protecting images from deletion. You can also create a digital “print order” for printing photographs on any device compatible with the Digital Print Order Format (DPOF), and select images for transfer to a computer. Deleting Pictures: Delete The Delete menu contains the following options: Playing Pictures Back—The Playback Menu Option DELETE Description Selected Images All Images Delete selected photoSelected Images graphs and movies. All Images MENU OFF Delete all pictures. SELECT SET Deleting Selected Photographs and Movies To delete selected photographs and movies: 1 2 DELETE ERASE SELECTED IMAGES Selected Images All Images MENU OFF SELECT SET Highlight Selected Images 3 ERASE SELECTED IMAGES SELECT SET Highlight picture 76 QUICK DONE SELECT SET QUICK DONE Display menu of thumbnail images 4 ERASE SELECTED IMAGES SELECT SET QUICK DONE Press multi selector up or down to select picture for deletion. Selected pictures are marked by icon. Repeat steps 3 and 4 to select additional pictures for deletion. To deselect picture, highlight and press multi selector up or down. To exit without deleting pictures, press MENU button. 5 DELETE SELECT MENU OFF SET Deleting All Photographs and Movies To delete all pictures on the memory card: 1 2 DELETE ERASE ALL IMAGES Erasing All Images ( Exclude ) Selected Images All Images No Yes MENU OFF SELECT Highlight All Images SET MENU OFF SELECT SET Confirmation dialog displayed. Press multi selector up or down to highlight option, press to right to put choice into effect: • Select No to return to playback menu without deleting pictures • Select Yes to delete all pictures on memory card (protected pictures will not be deleted) Before Deletion Once deleted, pictures can not be recovered. Be sure that any pictures you would like to keep have been transferred to your computer. Protected Pictures Pictures marked with a deletion. icon are protected and can not be selected for 77 Playing Pictures Back—The Playback Menu No Yes Press to display a confirmation dialog. Press multi selector up or down to highlight option, press to right to put choice into effect: • Select No to return to playback menu without deleting pictures • Select Yes to delete all selected pictures Ordering Prints: Print Set Playing Pictures Back—The Playback Menu Selecting Print Set from the playback menu disPRINT SET plays the menu shown at right. Using the Print set option, you can specify the pictures to be Print set Delete print set printed, the number of prints, and the information to be included on each print. This information is stored on the memory card in Digital Print SET SELECT MENU OFF Order Format (DPOF). Once a print order has been created, the memory card can be removed from the camera and inserted in any DPOF-compatible device—be it your personal photo printer or a photofinisher’s print system—and pictures printed directly from the card. Option Print set Description Create or modify print order. Delete print set Cancel the current print order. Selecting Pictures for Printing To create a print order, or to modify the existing print order, highlight Print set in the print set menu and press the multi selector to the right. The menu shown at right will be displayed. To select pictures for printing: PRINT SELECT 1 SELECT SET Highlight pictures 78 2 PRINT QUICK DONE SET QUICK DONE PRINT SELECT SET QUICK DONE Press multi selector up to select picture. Selected pictures are marked by icon. 3 PRINT 4 SET QUICK DONE PRINT SET Done Info Date MENU OFF SELECT SET Press to complete operation and display menu of print options. To highlight option, press multi selector up or down. • To print shutter speed and aperture on all selected photographs, highlight Info and press multi selector to right. Check will appear in box next to item. • To print date of recording on all selected photographs, highlight Date and press multi selector to right. Check will appear in box next to item. • To deselect a checked item, highlight and press multi selector to right. • To complete print order and return to playback, highlight Done and press multi selector to right. To exit without altering print order, press MENU button. “Date” The Date option functions in much the same way as the date imprint option in many film cameras. For the date printed on your pictures to be correct, the clock calendar ( 21–22) must be set correctly when the picture is taken. The date will not appear on your pictures if the print system used does not support the DPOF date function. 79 Playing Pictures Back—The Playback Menu SELECT Use multi selector to specify number of prints. Press up to increase (maximum 9), down to decrease. To deselect picture, press multi selector down when number of prints is 1. Repeat steps 1–3 to select additional pictures. To exit without altering print order, press MENU button. Safeguarding Valuable Pictures: Protect Playing Pictures Back—The Playback Menu Selecting Protect from the playback menu displays the menu shown at right, where you can select pictures to protect from accidental deletion. PROTECT SELECT 1 2 PROTECT SELECT SET QUICK DONE Highlight picture 3 DONE SET QUICK DONE PROTECT SELECT SET QUICK DONE Press multi selector up or down to select picture. Selected pictures are marked by icon. Repeat steps 1 and 2 to select additional pictures. To deselect picture, highlight and press multi selector up or down. Press to complete operation. To exit Protect menu without changing protected status of pictures, press MENU button. Protected Pictures Protected files can not be deleted in review, single-image playback, or from the Delete sub-menu. Note, however, that protected pictures will be deleted when the memory card is formatted. 80 Marking All Pictures for Transfer: Auto Transfer AUTO TRANSFER All ON All OFF MENU OFF Option SELECT SET Description All ON Mark all pictures on the memory card for transfer to a computer. All OFF Remove transfer marking from all pictures on the memory card. Transferring More than 999 Pictures No more than 999 pictures can be transferred at one time using the ( ) button ( 82). To copy more pictures, use Nikon View. See the Nikon View Reference Manual (on CD) for details. Marking Pictures for Transfer with Other Cameras Pictures selected for transfer with another model of Nikon digital camera can not be transferred when the memory card is inserted in the COOLPIX 3500. Use the COOLPIX 3500 to reselect the images. 81 Playing Pictures Back—The Playback Menu To turn transfer marking ( 82) on or off for all pictures simultaneously, select Auto Transfer from the playback menu. The following options will be displayed: Selecting Pictures for Transfer Playing Pictures Back—The Playback Menu Pictures selected for transfer to a computer are marked with a icon. You can turn transfer marking for selected pictures on or off by pressing the ( ) button while the pictures are displayed in playback mode ( 69, 70) or in full-screen or thumbnail review ( 33, 34). 2048 NORMAL ( ) button 1/0011 Full-screen review/ single-image playback Thumbnail review/ thumbnail playback Pictures are automatically marked for transfer as they are taken. If the selected picture is already marked with a icon, pressing the ( ) button will turn transfer marking off. If the picture is not marked with a icon, pressing the ( ) button will turn transfer marking on. If the camera is connected to a computer as described below, pressing the ( ) button will transfer pictures marked with a icon to the computer. Transferring Pictures to a Computer Once you have installed the Nikon View software provided with your camera, you can connect the camera via the UC-E3 cable provided and copy (transfer) selected pictures to your computer at the touch of a button. Use UC-E3 cable to connect camera directly to computer as shown. Do not connect camera via USB hub or keyboard. Pictures can be transferred to the computer by pressing the ( ) button on the camera body or by clicking the button in Nikon View. For information on installing Nikon View and transferring pictures using the ( ) button, see the Quick Start Guide. More information on using Nikon View may be found in the Nikon View Reference Manual (on CD). 82 Technical Notes Camera Care, Options, and Resources This chapter provides tips on cleaning and storing your camera, a list of optional accessories available for the COOLPIX 3500, information on where to get help on line, troubleshooting advice, and camera specifications. 83 Caring for the Camera and Battery Technical Notes To ensure continued enjoyment of your Nikon product, observe the following precautions when using or storing the device. Keep dry The device will be damaged if immersed in water or subjected to high levels of moisture. Handle the lens and all moving parts with care Do not apply force to the lens or to the battery, card, and connector covers. These parts are especially susceptible to damage. Turn the product off before removing or disconnecting the power source Do not unplug the product or remove the battery while the product is on, or while images are being recorded or deleted. Forcibly cutting power to the product in these circumstances could result in loss of data or in damage to product memory or internal circuitry. To prevent an accidental interruption of power, avoid carrying the product from one location to another while the AC adapter is connected. Do not drop The product may malfunction if subjected to strong shocks or vibration. Keep away from strong magnetic fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data stored on the memory card, or affect the product’s internal circuitry. Avoid sudden changes in temperature Sudden changes in temperature, such as occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature. 84 Cleaning Monitor Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply pressure. Body Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt with a cloth lightly dampened with fresh water, then dry thoroughly. Do not use alcohol, thinner, or other volatile chemicals Avoid Contact with Liquid Crystal Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the monitor touching the skin or entering the eyes or mouth. Notes on the Monitor • The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD monitors and does not indicate a malfunction. Images recorded with the product will not be affected. • Images in the monitor may be difficult to see in a bright light. • The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon service representative. 85 Technical Notes Lens One key to cleaning the lens is to not touch it with your fingers. Use a blower (typically a small device with a rubber bulb attached to one end that you pump to produce a stream of air out the other) to remove dust or lint. To remove fingerprints or other stains that can not be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts in the center of the lens and works out to the edges. Storage Technical Notes When the camera is not in use, turn the camera off and return the lens section to its housing in the camera body. To prevent mold or mildew, store the camera in a dry, well-ventilated area. If you will not be using the product for long periods, remove the battery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals. Do not store your camera with naphtha or camphor moth balls or in locations that: • are poorly ventilated or damp • are next to equipment that produces strong electromagnetic fields, such as televisions or radios • are exposed to temperatures above 50 °C (122 °F) or below –10 °C (14 °F), for example near a space heater or in a closed vehicle on a hot day • are subject to humidities of over 60% To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again. Store the battery in a cool, dry place. Batteries • When you turn the device on, check the battery-level displayed in the monitor to determine whether the battery needs to be replaced. A warning will be displayed when the battery needs to be replaced. • Ready a spare battery and keep it fully charged when taking pictures on important occasions. Depending on your location, you may find it difficult to purchase replacement batteries on short notice. • On cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking pictures outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge. • Should the battery terminals become dirty, wipe them off with a clean, dry cloth before use. 86 Optional Accessories Rechargeable battery Additional EN-EL2 Li-ion batteries are available from your retailer or local Nikon representative AC adapter EH-60/EH-60S AC adapter kit* Carrying case CS-E2500 soft case CompactFlash™ memory EC-AD1 PC-card adapter card adapters Monitor (LCD) hood HL-E2500 LCD hood *EH-60S available only in USA. Memory Cards Turn the power off before inserting or removing memory cards. Inserting or removing cards with the power on could render them unusable. Insert memory cards as shown in the illustration at right. Inserting cards upside down or backwards could damage the camera or the card. Approved Memory Cards In addition to the card provided with your camera, the following memory cards have been tested and approved for use in the COOLPIX 3500: Nikon SanDisk Lexar Media All capacities EC-CF series SDCFB series 16 MB, 32 MB, 48 MB, 64 MB, 96 MB, 128 MB 4× USB series 8 MB, 16 MB, 32 MB, 48 MB, 64 MB, 80 MB 8× USB series 8 MB, 16 MB, 32 MB, 48 MB, 64 MB, 80 MB 10× USB series 128 MB, 160 MB Operation is not guaranteed with other makes of memory card. For more details on the above cards, please contact the manufacturer. 87 Technical Notes At the time of writing, the following optional accessories were available for the COOLPIX 3500. Contact your local retailer or Nikon representative for details. Web Resources Technical Notes At the time of writing, the following on-line resources were available for users of Nikon digital imaging equipment: For Product Information and Tips • For users in the USA: http://www.nikonusa.com/ • For users in Europe: http://www.nikon-euro.com/ • For users in Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/ For Contact Information Contact information for the Nikon representative in your area may be found at: http://www.nikon-image.com/eng/ Troubleshooting If your camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative. Refer to the page numbers listed in the rightmost column for information on solving the problems listed here. Problem Possible cause Monitor is blank • Camera is off. • Battery is not correctly inserted. • Battery is exhausted. • AC adapter kit (available separately) is not properly connected. • Camera is in sleep mode. Press shutter-release button halfway. • USB cable is connected. 6 17 24 87 • Battery is low. • Battery is cold. 24 86 Camera turns off immediately 63 — No indicators appear • Indicators are hidden. Press multi selector to 7 in monitor left until indicators are displayed. 88 Problem • Ambient lighting is too bright: move to a dark- 87 er location or use HL-E2500 LCD hood (available separately). • Monitor is dirty. 85 • Monitor brightness requires adjustment. 62 • Camera is in playback mode. • Battery is exhausted. • Message “Please turn the lens to the shooting position” appears in monitor: lens is blocked by camera body. Rotate lens section until message is no longer displayed. • Message “OUT OF MEMORY” appears in monNo photo is taken itor: insufficient memory to record pictures at when shutter-release current settings. button is fully • Focus indicator flashes red: camera unable to pressed focus. • Flash-ready lamp flickers: flash is charging. • Message “CARD IS NOT FORMATTED” appears in monitor: memory card is not formatted for use in COOLPIX 3500. • Message “NO CARD PRESENT” appears in monitor: no memory card in camera. 6 24 26 • Flash is off. Photos are too dark • Flash window is blocked. (underexposed) • Subject is outside range of flash. • Exposure compensation is too low. 43 27 96 53 Photos are too bright • Exposure compensation is too high. (overexposed) 53 Photos are out of focus 93 28 28 92 92 • Focus indicator flashes red: camera unable to 28 focus. 89 Technical Notes Monitor is hard to read Possible cause Problem Technical Notes Photos are blurred Possible cause • Camera shook during shot. Blurring caused by camera shake can be reduced by: – Using the flash 43 – Using the Best-Shot Selector (BSS) 57 – Using the self-timer 45 – Using a tripod — • Shutter speed too slow. Use the flash. 43 Randomly-spaced • Noise reduction, which helps reduce noise at 38, bright pixels slow shutter speeds, is available in the follow- 39 ing scenes: Night Portrait and Night Land(“noise”) appear in image scape. Using these scenes when appropriate can reduce noise. Flash does not fire • Flash is off. Note that flash turns off automatically when: – Landscape, Sunset, Night Landscape, Museum, or Fireworks Show is selected in scene mode – Camera is in movie mode – Continuous or Multi-Shot 16 is selected in the CONTINUOUS menu ( mode only) – BSS is on ( mode only) • Battery level is low. 43 38, 39 42 56 57 24 Colors are unnatural • White balance does not match light source. 54 No menu is displayed when MENU button • Camera is in movie mode. is pressed 42 90 Problem • Picture has been overwritten or renamed by a — computer or other make of camera. • Picture is displayed in full-screen review. Small Pressing pictures can only be created in playback mode. button when picture • Picture is a movie. Small pictures can only be is displayed full created from photos. screen does not • Picture is already a small picture. create small picture • There is not enough free space on the memory card for a small picture. 72 72 73 73 Can not zoom in on • Picture is a movie. picture during play71 • Picture was created using small picture option. back or review • Camera is off. • AC adapter kit (available separately) is not properly connected, or battery is dead. • USB cable not correctly connected, or card not properly inserted in card reader, card adapter, or card slot. Nikon View does not • USB item in setup menu set to PTP when start when camera camera connected to computer running Winconnected or memory dows 2000 Professional, Windows Millennicard inserted in card um Edition (Me), Windows 98 Second Edition reader or card slot (SE), or Mac OS 9 • Camera is not registered in Device Manager (Windows only). See Nikon View Reference Manual (on CD) for further information on troubleshooting Nikon View. 6 87 — 64 — 91 Technical Notes Picture can not be played back Possible cause Error Messages Technical Notes The following table lists the error messages and other warnings that appear in the monitor and how to deal with them. Display (Flashes) Problem Clock calendar not Set clock calendar to cur- 21– set. rent date and time. 22 WARNING ! ! BATTERY EXHAUSTED AF● (● flashes red) Solution Battery exhausted. Turn camera off and re- 16– 18 place battery. Use focus lock to focus on another subject at same Camera cannot focus. 28 distance, then recompose photograph. Use flash, or steady camera by mounting on tripod, Slow shutter speed. 37, placing on level surface, or Photos may be blurred. 43 holding in both hands with elbows against torso. Please turn the lens to Lens is blocked by Rotate lens until message 26 the shooting position camera body. is no longer displayed. Attempt made to Message clears from disturn camera off or WARNING ! ! Please wait for camera view pictures during play automatically when 29 recording is complete. to finish recording recording. Turn camera off and conCamera can not de16– firm that memory card is tect memory card. 18 NO CARD PRESENT correctly inserted. CARD IS NOT FORMATTED FORMAT NO 92 Press multi selector up to Memory card has not highlight FORMAT and 16– been formatted for press to right to format 18 use in COOLPIX 3500. card, or turn camera off and replace card. Display Problem Solution Camera in mode: • Reduce image quality or Insufficient memory size. to record pictures at • Delete photographs. current settings. • Insert new memory card. 51, 52 76 16 Error occurs when you try to transfer OUT OF MEMORY images to computer: Disconnect camera, delete Not enough space unwanted photographs 76 on memory card to and try again. record information needed for transfer. IMAGE CANNOT BE SAVED CARD CONTAINS NO IMAGES • Memory card has • Reformat memory card. not been formatted for use in camera, or error occurred while saving photo. • Camera has run out • Insert new memory card of file numbers. or delete pictures. • Camera can not • Small pictures can not be create small pic- created from small picture. tures or movies. 62 16, 76 72– 73 • Camera in review mode: 33 half-press shutter button No pictures on memto return to mode. ory card. • Camera in mode: se- 6 lect mode. 93 Technical Notes • Use approved card. 87 • Check that connectors — Error accessing memare clean. If card is damory card. aged, contact retailer or WARNING ! ! Nikon representative. This CF card cannot be read THIS CARD CANNOT BE USED Display Problem Solution If error appears in computer monitor, click OK to exit Nikon View. Turn camera 16– off, reconnect cable or re- 18 place memory card, then turn camera on. COMMUNICATIONS Protocol selected in ERROR USB menu does not match that used by computer operating system, causing error when ( ) button is pressed to transfer pictures. Turn camera off and disconnect USB cable, then change USB selection in camera setup menu and 64 reconnect camera. If error reoccurs, use Nikon View button to transfer pictures. Technical Notes USB cable disconnected or memory card removed while pictures are being transferred to computer. FILE CONTAINS NO IMAGE DATA File created by comDelete file or reformat 76, puter or different memory card. 62 make of camera. NO IMAGES ARE MARKED FOR TRANSFER No pictures marked for transfer when ( ) button pressed to copy pictures to computer. TRANSFER ERROR Error occurred when Check that the camera is pictures were trans- properly connected and 24 ferred to computer. battery fully charged. SYSTEM ERROR 94 Disconnect camera and 33, mark at least one picture 69, for transfer before con81 necting camera again. Turn camera off, unplug optional AC adapter kit (if Error has occurred in using) or remove and re-in16– camera’s internal cir- sert battery, and turn cam18 cuitry. era on. If error persists, contact retailer or Nikon representative. Specifications E3500 digital camera Effective pixels 3.2 million CCD 1 Technical Notes Type /2.7˝ high-density CCD; total pixels: 3.34 million Image size (pixels) • 2048 × 1536 (2048) • 1600 × 1200 (1600) • 1280 × 960 (1280) • 1024 × 768 (1024) • 640 × 480 (640) 3 × Zoom Nikkor Lens Focal length F = 5.6 – 16.8 mm (35-mm [135] camera format equivalent: 37 – 111 mm) f/-number f/2.7 – f/4.8 Construction Seven elements in six groups Digital zoom 4.0 × Autofocus (AF) Contrast-detect through-the-lens (TTL) AF Focus range 30 cm (1´) – ∞; 4 cm (1.6˝) – ∞ in Close Up mode Focus-area selection Five-area multi AF with auto AF-area selection Monitor Frame coverage ( 1.5˝, 110,000-dot, low temperature polysilicon TFT LCD with brightness adjustment mode) Approximately 97% vertical and 97% horizontal A Note on Electronically-Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, and turn the camera on again, or, if you are using an AC adapter (available separately), disconnect and reconnect the adapter and turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in loss of any data not recorded to the memory card at the time the problem occurred. Data already recorded to the memory card will not be affected. 95 Storage Technical Notes Media Type I CompactFlash™ (CF) cards File system Compliant with Design rule for Camera File systems (DCF), Exif 2.2, and Digital Print Order Format (DPOF) File formats Compressed: JPEG-baseline-compliant Movies: QuickTime Exposure Metering 256-segment matrix metering Exposure control Programmed auto exposure with exposure compensation (–2.0 – +2.0 EV in steps of 1/3 EV) Range W: 1.9 – 16.9 EV T: 3.5 – 18.6 EV Shutter Speed Aperture Range Mechanical and charge-coupled electronic shutter 2 – 1/3000 s Electronically-controlled preset aperture Two steps (f/2.7 and f/4.5 [W]) Sensitivity Approximately equivalent to ISO 50 (auto gain to ISO 200 equivalent) Self-timer Ten-second duration Built-in Speedlight Range (approx.) 0.4 – 3.0 m (1´4˝ – 9´10˝) (W) 0.4 – 1.7 m (1´4˝ – 5´7˝) (T) Flash control Sensor flash system Interface USB Design Rule for Camera File Systems (DCF) Your camera names pictures according to the Design Rule for Camera File Systems (DCF), a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. 96 Power sources * EH-60S available only in USA. Battery life (EN-EL2) Approximately 80 minutes with fully-charged battery (measured at room temperature [20 °C/68 °F] under standard Nikon test conditions: zoom adjusted with each shot, flash used in approximately one third of photographs, image size set to 2048, image quality set to NORMAL) Dimensions (W × H × D) 114 × 59.5 × 31.5 mm (4.5˝ × 2.3˝ × 1.2˝) Weight Approximately 175 g (6.2 oz) without battery or memory card Operating Environment Temperature 0 – 40 °C (32 – 104 °F) Humidity Less than 85% (no condensation) 97 Technical Notes • One rechargeable Nikon EN-EL2 lithium-ion battery (supplied) • EH-60/EH-60S AC adapter kit (available separately)* Index Symbols Index 2048, 1600, 1280, 1024, 640, 52 (shooting) mode, 6 (playback) mode, 6 button, 4, 33, 34, 68, 70 button, 4, 33, 69, 71 button, 5, 43 button, 5, 33, 34, 68, 70 button, 5, 33, 34, 69, 70, 82 . See shooting mode; movies , See self timer , 6, 24 , 6, 22 , 6, 37, 44 , , , , , , , , , , , , 37– 40 AUTO, , , , 43 , 6, 53 A, , , , , , , 54 , , , 56 , , , , , 58 , , , 78, 80, 81 A . See shooting mode, auto Accessories. See optional accessories AF●. See focus indicator Autofocus, 28 Auto Off, 63 Auto Transfer, 81 98 B Back Light, 40 BASIC, 51 Battery, 16–18, 24 life, 86, 97 storing, 86 Beach/Snow, 38 BEST SHOT SELECTOR, 57 Brightness, 62 BSS. See BEST SHOT SELECTOR C Camera strap, 16 CF card. See memory card CF Card Format, 62 Clock-calendar, 18, 21–22 Close Up, 40 CompactFlash ™ card. See memory card Compression. See image quality Computer. See Nikon View; transfer CONTINUOUS, 56 Copy, 40 Copying images. See transfer D Date, 21–22 imprinting, 79 DCF. See Design rule for Camera File systems Delete, 76–77 Deleting images from playback menu, 76–77 in full-frame playback, 68 in quick review, 33 in thumbnail review, 34, 70 Design rule for Camera File systems, 69, 96 Digital Print Order Format, 78 DISP. See monitor, indicators; photo information DPOF. See digital Print Order Format E Error messages, 92–94 EXP +/–, 53 Exposure compensation, 6, 53 F FINE, 51 Fireworks Show, 39 Flash, 43 Flash mode, 43 Flash-ready lamp, 28, 43 Focus. See autofocus Focus indicator, 6, 28 Formatting. See memory card I Image quality, 6, 51 Image size, 6, 52 IMAGE SHARPENING, 58 ISO. See sensitivity J JPEG. See image quality L Landscape, 38 Language, 19–20, 64 M N Night Landscape, 39 Night Portrait, 38 Nikon View, i, 82 Noise, 38, 44 Noise reduction, 38 NORMAL, 51 Number of exposures remaining, 6, 24 O On/off. See mode selector Optional accessories, 87 P Party/Indoor, 37 Photo information, 7, 33, 69 Picture Transfer Protocol. See USB. Playback, 68. See also quick review full frame, 68 movie, 74 thumbnail, 70 zoom, 71 PLAY BACK menu, 75 Portrait, 37 Print Set, 78–79 Protect, 80 PTP. See USB. Q Quality. See image quality button, 4, 31 Quick review, 32 full screen, 32 thumbnail, 34 QuickTime. See movies QVGA. See movies R Red-eye reduction. See flash mode Reset All, 66 S Scene, 36 mode, 37–40 selection, 36 SCENE button, 5 Self-portrait. See monitor; selftimer Self-timer, 45 Sensitivity, 6, 44 SET-UP menu, 59 Sharpening. See IMAGE SHARPENING Shooting mode, 6, 42 (auto), 42 (manual), 42 movie, 42 Shutter-release button, 28–29 Shutter release delay. See selftimer Size. See image size SMALL PIC. button, 4, 72 Small picture, 72 Smear, 27 Specifications, 95–97 Speedlight. See flash Strap. See camera strap Sunset, 39 T T. See zoom, indicator . See zoom, buttons Telephoto. See zoom Thumbnail display, 34, 70 Time and date. See Date Timer. See self-timer Transfer, 8, 82 marking images for, 33, 34, 69, 70, 81, 82 Troubleshooting, 88–94, 95 U USB, 64 99 Index . See shooting mode, manual Mass storage. See USB. Memory card, 87 approved cards, 87 capacity of, 51 formatting, 62 insertion and removal of, 16– 18 MENU button, 4, 49, 60, 75 Menus, 9–14 Mode selector, 5, 6 Monitor, 5, 6–7 brightness, 62 indicators, 6–7 framing photographs in, 27 MOV. See movies Movies, 42 playing back, 74 recording, 42 Multi selector, 5, 8 Museum, 39 W Index W. See zoom, indicator . See zoom, buttons Web resources, 88 White balance, 54 preset, 55 Wide angle. See zoom Z Zoom buttons, 4, 27, 47, 70, 71 digital, 47 indicator, 6, 27, 47 optical, 47 100 En The Guide to Digital Photography with the DIGITAL CAMERA En 5.6-16.8mm1:2.7-4.8 Printed in Japan S2G10000101(11) 6MAA3811--
