Download Bugaboo Frog Stroller

© Copyright 2005 Bugaboo® International BV. The information contained herein is subject to
change without notice. Bugaboo® International BV shall not be liable for technical errors or
omissions contained herein.
eng
english
eng
before starting 4
1. basic steps 8
2. assembling the carrycot 18
3. assembling the seat 20
4. various uses of carrycot and seat 22
5. using the seat’s safety belts 23
6. fitting the underseat bag 25
7. going outdoors with the bugaboo cameleon 26
8. protection against weather and wind 29
9. travelling and storage 34
10. maintenance and accessories 36
11. warranty 38
eng
content
eng
before starting
You have chosen the Bugaboo Cameleon in your own personal colour
combination. The Bugaboo Cameleon is functional, versatile and comfortable.
You will increasingly discover how the Bugaboo Cameleon’s innovative design
provides everything you could wish for from a buggy. We wish you a great deal
of pleasure with your Bugaboo Cameleon. Please remember to complete and
return the warranty card as soon as possible, so that you can be certain of
receiving the best service and warranty from Bugaboo. This can be done either
by visiting our website or by returning the enclosed prepaid warranty card.
important
- Read these instructions carefully before you use the product and keep them for future reference.
Your child’s safety may be affected if you do not follow these instructions.
- This user guide is for the Bugaboo Cameleon, item code number 70100.
- You will find a sticker with the model number and serial number on the centre axle
of the chassis.
- Pram, pushchair and buggy comply with standard EN 1888: March 2003.
- The carrycot complies to the requirements of standard EN 1466: 2004
- For replacements, only use original parts that are supplied or approved by
Bugaboo International BV.
- Use original Bugaboo accessories. The warranty does not cover damage to the Bugaboo
Cameleon caused by overloading, incorrect folding or the use of non-original accessories.
The warranty conditions are stated in section 11 and provide further information.
- The Bugaboo Cameleon is patented. The Bugaboo Cameleon model is protected.
- This vehicle is intend for children from 0 years up to a weight of 17 kg/37.5 lbs
(around 4 years old).
- The Bugaboo Cameleon carrycot is suitable for a baby aged 0 to around 6 months,
up to 9 kg/19.8 lbs in weight or 76 cm/30 inches in length.
- Only use products recommended by Bugaboo in combination with the Bugaboo Cameleon.
- Parts of the Bugaboo Cameleon may discolour in the sun.
- Avoid exposing the Bugaboo Cameleon to extreme temperatures.
- Regularly check the Bugaboo Cameleon’s touch fasteners and fasteners. Avoid unsafe situations.
™ ® BUGABOO, the Bugaboo logos, FROG, GECKO and CAMELEON are registered, pending or claimed trademarks of Bugaboo.
The Bugaboo strollers are patented. The Bugaboo strollers’ models are protected.
.
- The Bugaboo Cameleon is not a car seat. Transport your child by car in an approved car seat.
Ask your supplier for details.
- Approved child seats can be readily fitted to the Bugaboo Cameleon’s chassis using Bugaboo
adapters. See accessories (section 10).
- Do not allow children to play with the Bugaboo Cameleon. They may be injured.
- Use the 5-point harness when the child is seated in the Bugaboo Cameleon seat, both when
the seat is detached and when it has been fastened to the chassis.
- Take your child out of the Bugaboo Cameleon when going up or down stairs, escalators
or steep slopes.
- The Bugaboo Cameleon is only intended for carrying one child.
- Always use the wrist strap that is attached to the handle bar.
WA R N I N G
• Do not stand on the axles between the wheels. This is unsafe and could
damage the Bugaboo Cameleon.
• Keep the Bugaboo Cameleon away from open flames and other heat sources,
such as electrical or gas heaters, etc.
• Do not use if any part is broken, torn or missing
• Every weight attached to the handlebar will have a negative impact on the
stability of the pushchair.
• This product is not suitable for running or skating.
• It may be dangerous to leave your child unattended.
• Ensure that all locking devices are engaged before use.
• Check that the pram body or seat unit attachment devices are correctly
engaged before use.
• This seat is not suitable for children under 6 months.
• Do not add a mattress thicker than 30 mm.
• Use only the frame of the Bugaboo Cameleon with frame number 70101 on the
chassis with chassis number 70100, otherwise unsafe situations may occur. The
frame number is on the sticker that is attached to the inside of the frame. The
chassis number is on the sticker that is attached to the central bar.
• Do not change the position of the seat when the child is in the seat. Prevent the
child from falling and being injured.
• Never pick up the Bugaboo Cameleon and chassis by the carry handle while your
child is lying or sitting in the carrycot or seat.
• The wing nuts must be in the locked position when the handlebar is flipped to the
reverse side to ensure the handlebar securely locks into place.
• Any adjustments made to the suspension of the swivel wheels must be identical
on both wheels. Failure to make concurrent adjustments may lead to dangerous
instability.
• Do not let other children play unattended near the carry cot
• The carry cot is only suitable for a child who cannot sit up unaided
eng
safety
check what you have received
eng
You have received 2 boxes. Check the contents of the boxes against the list below. If anything is
missing, please contact your supplier.
the box with the bugaboo cameleon:
1 chassis with handlebar, parking brake and wrist strap
2 swivel wheels (with adjustable suspension)
2 big wheels (with pneumatic tyres)
1 frame (base for seat and carrycot)
1 base underseat bag
1 carry handle
1 base carrycot fabric with base plate
1 base mattress
1 base seat fabric with safety belts
1 canopy frame and 2 clamps
1 rain cover
1 mosquito net
1 bicycle pump valve attachment (in bag with user guide)
1 user guide
1 maintenance kit
1 bugaboo demonstration DVD
1 warranty card
the box with thetailored fabric:
1 tailored seat fabric
1 tailored apron
1 tailored sun canopy
WA R N I N G
• Infants and young children can suffocate and die if their faces are in or next to
a plastic bag. Discard the plastic bags immediately. Keep the plastic bags away
from children, infants, cribs, beds playpens or carriages.
step-by-step user guide
Follow the step-by-step user guide to assemble the Bugaboo Cameleon.
See the following sections:
1. basic steps
2. assembling the carrycot
3. assembling the seat
4. various uses of carrycot and seat
5. using the seat’s safety belts
6. fitting the underseat bag
7. going outdoors with the bugaboo cameleon
8. protection against weather and wind
9. travelling and storage
10. maintenance and accessories
11. warranty
important
Always assemble the Bugaboo Cameleon:
- without the child in the seat or carrycot (unless indicated otherwise);
- with the parking brake on (unless indicated otherwise).
Advice A
ll parts fit together properly, so no force is necessary. If you find something difficult, read
the instructions again and try once more.
Advice Follow the instructions in this user guide to assemble the Bugaboo Cameleon. Assemble
step-by-step so that you become familiar with all of the Bugaboo Cameleon’s parts and
possibilities.
eng
The Bugaboo Cameleon is easy to assemble. It is advisable to repeat actions a couple of times
when indicated. The chassis is the main part of the Bugaboo Cameleon. The frame fits onto the
chassis and is the base for the carrycot and seat.
eng
1. basic steps
This section explains how to assemble the Bugaboo Cameleon. Each basic step
in the Bugaboo Cameleon’s assembly is explained separately in the text boxes.
It is advisable to practice the basic steps.
chassis
The parts are attached to the chassis. The chassis comprises:
- axle for the big wheels;
- axle for the swivel wheels with holder;
- handlebar with frame bearers, parking brake and wrist strap.
You also need the following for the assembly:
- 2 swivel wheels;
- 2 big wheels with pneumatic tyres.
Frame and carry handle complete the chassis for further assembly.
Advice Use the cardboard packaging as a mat during assembly.
step 1 folding out the chassis and handlebar
a Place the chassis with the 4 points on the floor.
a
b. Stand with the handlebar in front of you.
c. Hold the handlebar lightly in your hands. Do not push.
dPull the 2 white buttons on the outside of the
handlebar towards you.
d
e
swivel wheels
The swivel wheels provide optimum manoeuvrability.
step 2 placing the swivel wheels in the holders
aWithout releasing it, move the handlebar to the floor.
The wheel axles are now facing upwards. It is easy to
install the wheels this way.
a
bMove the white sliding buttons upwards.
These are the swivel wheel locks.
b
cStand with wheel axles in front of you. With the wheel
facing upward and the wheel lock facing away from
you, push the swivel wheel into the holder.
c
d.You will hear a ‘click’ for each wheel. The swivel wheels
are now attached.
Note D
o not fit the swivel wheels on the wrong side
of the holder.
eng
eMove the handlebar upwards and away from you and
let go of the white buttons. You hear a ‘click’ when
the handlebar is upright.
other functions
eng
removing the swivel wheels from the holders
10
a.The swivel wheel has a round button, which protrudes through the holder.
The button has 2 sprung lips.
b
bSqueeze the 2 lips together and remove the
swivel wheel from the holder.
c. Do the same on the other side.
swivel wheels active
a. Push down the swivel locks.
b. The swivel wheels are active.
c.The Bugaboo Cameleon’s manoeuvrability is highest
with this setting.
swivel wheels not active
a. Push up the swivel locks.
b. The swivel wheels are non-active.
c. The Bugaboo Cameleon now moves in a straight line.
adjusting the swivel wheels
The suspension is usually adjusted to the lightest setting.
a. Set the swivel wheels to non-active.
b Pull down the white spring clamp.
c Slide the white spring clamp to one of the 4 positions.
d.Fasten the spring on both swivel wheels in the same
position.
Advice T he more upright the springs when the 4 wheels are
on the floor, the more rigid the suspension.
Advice For continued optimum comfort, Bugaboo
recommends adjusting the spring one notch for every
5kg of load (child + baggage in the underseat bag).
WA R N I N G
• ALWAYS put both swivel wheel springs in the
same position. This prevents instability.
b
c
big wheels with pneumatic tyres
11
step 3 fitting the big wheels to the axle
aPush the big wheels into the wheel holders at the ends
of the long axle.
a
b.You will hear a ‘click’ for each wheel. The wheels are
now attached.
other functions
removing the big wheels from the axle
aSqueeze the clamp together that is located on the
inside of a big wheel.
a
bRemove the wheel from the axle. Also remove the big
wheel on the other side.
b
Note T he big wheels cannot be removed from the axle
if the Bugaboo Cameleon’s parking brake is on.
eng
The tyres of the 2 big wheels are inflated to the correct pressure(1 bar/15 PSI) at the time of
delivery. The valve attachment is in the plastic bag containing the user guide. If necessary,
use the valve attachment to inflate the tyres with a bicycle pump.
eng
inflating the tyres
12
a. Unscrew the valve’s black valve cap.
b Screw the valve attachment onto the big wheel’s valve.
c.Use an ordinary bicycle pump to inflate the
pneumatic tyres.
d. Do not inflate to more than 1 bar (15 PSI).
b
deflating the tyres
a. Unscrew the valve attachment.
b.Press the thin side in the big wheel’s valve.
This releases air.
Note Do not leave the valve caps lying around.
Prevent children from putting them in their mouths.
Note the pneumatic tyres provide maximum suspension when inflated to the correct pressure.
Advice When inflated to the correct pressure you can easily depress the tire with your finger.
unfolding the chassis
In order to fold out the chassis, it first has to be collapsed completely. To do so, please pull the
handlebar up. The large wheels are on the floor.. Release the handlebar and click it in position
between the big wheels. The chassis is now folded up.
step 4 unfolding the chassis
a. Stand with the handlebar and big wheels in front of you.
bRelease the handlebar and pull it up and towards
you (let go of the release catch), until it ‘clicks’ in the
fastened position.
b
c Push your foot against the axle of the swivel wheels.
c
d.The swivel wheels are released. The chassis is now
standing on 4 wheels.
The parking brake is on the handlebar. It prevents the big wheels from turning. Always apply the
Bugaboo Cameleon’s parking brake when the buggy is stationary, so that it cannot roll away.
When the handlebar is above the big wheels, the parking brake is on the right on the handlebar,
with the release button on the inside.
step 5 applying the parking brake
aPush the parking brake’s handle away from you
and downwards.
a
b.When the handle will not move any further, the
Bugaboo Cameleon’s parking brake is on.
Note Y ou will be able to feel when the parking brake is
working properly. Do not force the parking brake.
other functions
releasing the parking brake
aGrip the handle tightly with one hand. Press the white,
round button on the handle with the other hand and
move the handle towards the handlebar.
b. The parking brake is now off.
a
Note If you press the white, round button on the handle
without holding the handle tightly, the parking brake
will be released suddenly. To avoid injury, do not
place your fingers between the handle and the
handlebar.
Note Release the Bugaboo Cameleon’s parking brake when
removing the big wheels from the axle.
adjusting the parking brake
a. Place the handlebar above the big wheels.
bScrew the brake cable adjuster upwards. The brake
cable is on the thin axle, next to the wheel on the right.
This reduces the braking force.
c.Screw the brake cable adjuster down to increase the
braking force.
WA R N I N G S
• Only apply the parking brake when the buggy
is stationary.
b
13
eng
parking brake
adjusting the handlebar
You can adjust the length of the handlebar.
eng
step 6 adjusting the length of the handlebar
14
aTurn both wing nuts on the outside of the handlebar
anticlockwise.
a
b This loosens the handlebar. Adjust it to the correct height.
b
c.Turn both wing nuts clockwise to secure the handlebar.
WA R N I N G S
• Check that the handlebar is properly fastened.
• The wing nuts must be in the locked position when the handlebar is flipped to the
reverse side to ensure the handlebar securely locks into place.
frame
The frame is fastened to the chassis; the chassis is then secured. The carrycot or seatfabric is
attached to the frame. The frame has 2 frame supports, which ‘click’ onto the 2 frame
bearers. The round side of the frame is always the head end of the carrycot or seat.
step 7 fitting the frame on the chassis
a Completely fold out the 2 frame supports.
a
b. Fit the frame supports on the frame bearers.
dPress the frame downwards until you hear a ‘click’ on
both sides. The frame is now attached to the chassis.
d
WA R N I N G S
• Check that the frame is attached to the chassis. Pick up the frame. If the frame
releases one or both sides of the chassis, press the frame onto the chassis again
until you hear a ‘click’ on both sides.
other functions
placing the frame in different positions
a. Place the frame on the chassis.
b Simultaneously press in the 2 round, white buttons
at the top of the frame supports.
b
c Tilt the frame by lifting the top part.
c
Note J ust the seat can be put in 3 frame positions.
The carrycot can only be used horizontally.
15
eng
c. Hold the frame horizontal.
removing the frame from the chassis
eng
a. Place the frame in the horizontal position.
bSimultaneously press the 2 square, white buttons on
the frame supports. This releases the frame.
b
16
c Pick up the frame.
d. Place the frame on the floor, on the frame supports.
c
Note the 2 square, white buttons are always used to
remove the frame, with the carrycot or the seat,
and to place it on the floor.
Turning the frame around
You can turn around the frame to change the seat and carrycot options.
a. Remove the frame from the chassis.
b
bWhile holding the frame in the horizontal position,
turn it around.
c. Place it back on the chassis.
carry handle
step 8 fitting the carry handle to the frame
a. There is a white button at each end of the carry handle
b Press and hold in the white button on one side.
b
c.Place one end of the carry handle above one of the
holes in the centre of the frame.
d Push it into the hole. You will hear a ‘click’.
d
e.Repeat this for the other side. The carry handle is
securely fastened.
AdviceRemove the carry handle by pressing the white
button in on one side and pulling out the carry
handle. Repeat this for the other side.
practicing
Now you have assembled the chassis you can:
• fold out the chassis;
• release, move and adjust the height of the handlebar;
• fit and remove the swivel wheels;
• activate and de-activate the swiveling action of the swivel wheels;
• adjust the suspension of the swivel wheels;
• fit and remove the big wheels;
• inflate the tyres to the right pressure;
• use the parking brake;
• fit, remove and turn around the frame;
• place the seat in different positions;
• fit and remove the carry handle.
17
eng
The carry handle fits on the frame. You can easily pick up and turn around the carrycot or seat
using the carry handle.
2. assembling the carrycot
eng
The carrycot consists of the frame, the carrycot fabric, with base plate, mattress
and the apron. Touch fasteners ensure the carrycot hangs stably in the frame.
18
step 1 attaching the carrycot fabric to the frame
The round side of the carrycot fabric fits in the round side of the frame.
a. Fit the frame (horizontally) onto the chassis.
b. Unfasten the touch fasteners.
cFasten the 12 touch fasteners tight to the frame, in the
order 1 to 6.
c
dFasten the touch fasteners to the frame supports below
the square, white buttons.
d
ePlace the 2 waist belts in the pockets near the frame
supports on the sides of the carrycot.
e
Note M
ake sure the plastic wires at the top and bottom
stay in their bags.
step 2 fitting the mattress
a
19
step 3 fitting the tailored apron
The apron protects the child against the cold and is fitted to the foot end of the carrycot.
aZip the apron onto the carrycot. First make sure that the
runners at the end on the left are next to each other.
b.If you use the sun canopy, pull the apron’s small elastic
bands over the buttons of the sun canopy’s clamps.
Note S ee section 8 on fitting the sun canopy.
You can leave the apron on the carrycot when fitting
the sun canopy, rain cover and mosquito net.
a
eng
aPlace the round side of the mattress against the round
side of the carrycot, with the cover opening pointing
downwards..
eng
3. assembling the seat
20
The seat comprises the seat fabric, which is pulled over the frame. The seat
fabric is fitted with back pad supports, foot support and seat pad. The seat has
2 shoulder belts, 1 crotch belt and 1 tensioning belt with metal O-rings. The seat
fabric has cut-aways on the left and right for the waist belts. The frame has 2
waist belts. When fastened together, the waist belts should stay in place at the
height of the side supports.
step 1 placing the seat fabric on the frame
a.Fold out the frame supports and place the frame
on the floor.
bSlide the rounded upper side of the base seat fabric
over the round side of the frame, with the Bugaboo logo
facing forward. Pull on the seat fabric so that it fits tightly.
b
cPlace one O-ring of the tensioning belt over the
protruding pin on the side of the frame.
c
d.Place the frame on that side to fasten the O-ring on
the other side.
e.Lean on the frame and push it inwards a little. Take
hold of the tensioning belt and pull the other metal
O-ring over the protruding pin.
fAttach the ends of the stretch belt underneath the seat.
You should hear a click.
f
g
hNow give shape to the seat by folding the seat pad
inwards.
h
iAttach the 2 touch fasteners at the foot end to the
underneath of the frame.
i
Note A
ssemble the seat before fitting it onto the chassis.
The seat cannot be placed on the frame before
assembly. Ensure that the touch fasteners and
tensioning belt are fastened properly.
21
eng
gNow pull the waist belts through the cut-aways in the
side of the seat fabric. Put the tailored seat fabric over
the base fabric. Pull the shoulder belts and the lap belts
through the tailored seat fabric. Then attach the tailored
seat fabric to the base fabric with the touch fasteners.
eng
4. various uses of carrycot and seat
22
You can use the carrycot from the child’s birth until the child is aged around 6
months. It is only intended to be used for children who cannot sit or get up onto
their hands and knees unaided. Do not use the carrycot for children who are
longer than 76 cm/29.9 inches or heavier than 9 kg/19.8 lbs.
You can use the seat for children older than 6 months who do not weigh more
than 17 kg/37.5 lbs.
carrycot
The child is able to lie down completely. This means the spine is not placed under any stress
and the child can stretch his/her legs. For use as a pram, only place the carrycot horizontally on
the chassis. The carrycot can be turned around easily. This enables you to see into the carrycot
and the child can look at you. The carrycot can also be used without the chassis, provided it is
placed on a horizontal, stable and dry surface.
WA R N I N G S
• Use the carrycot only if installed on the chassis or when placed on a horizontal,
stable and dry surface.
• Only use the carrycot in the horizontal position. In any other position, the child
may slide or fall out of the carrycot.
• Ensure that all the touch fasteners and fasteners are securely fastened before use.
• NEVER use the carrycot as a car bed. Avoid injurious or fatal accidents.
• NEVER use the carrycot fabric when it is not attached to the frame.
• Before picking up the carrycot by the carry handle, always check that the carry
handle is properly secured.
• Use the carrycot only if installed on the chassis or when placed on a horizontal,
stable and dry surface
• Use a harness as soon as your child can sit unaided.
seat
You can set the seat to one of three positions. This is only possible if the seat is on the chassis.
The 3 positions are:
1. sitting
2. reclining
3. lying
Note T he child’s posture (angle between the back support and seat pad) remains the same
in the 3 positions.
The seat can be turned around easily. That is how you change the direction your child is facing.
The seat can also be used separately from the chassis. You can use the seat as a free-standing
seat on the ground, if you fold out the frame supports completely.
WA R N I N G
• Before picking up the seat by the carry handle, always check that the carry
handle is properly secured.
• Use safety belts when your child can sit up on its own.
The Bugaboo Cameleon seat has a 5-point harness, which comprises:
2 shoulder belts, 1 crotch belt and 2 waist belts (fastened to the frame).
Use the safety belts when the child is sitting in the seat. Prevent the child
from falling out of the seat and being injured.
Note T he Bugaboo Cameleon’s carrycot and frame are fitted with extra fastening rings.
If required, you can use them to attach an extra harness or extra belts. The fastening
rings are attached to the base of the carrycot. The waist belts with extra fastening rings
are attached to the frame.
step 1 using safety belts
a.Fit the seat to the chassis (with the brake applied)
or on the floor.
b. Place the child in the seat.
cPull the crotch belt forwards between the child’s legs.
If the child slides down, first pass the crotch belt
through the black loop on the seat pad.
c
dAttach the waist belts over the child’s waist to the
crotch belt. Adjust the belts to the size of the child,
by pulling them tight.
d
23
eng
5. using the seat safety belts
eng
eAttach the shoulder belts over the child’s shoulders to
the crotch belt. Adjust the belts to the length of the child,
by pulling them tight.
24
e
f.You should now have heard a ‘click’ 4 times. This
means the child is sitting securely in the
Bugaboo Cameleon seat.
WA R N I N G S
• Ensure that all the touch fasteners and fasteners are securely fastened before use.
• Always use the crotch strap in combination with the hip belt.
• Always secure the child in the seat belts. Avoid being caught off guard by the
child making unexpected movements.
• The safety belts must be adjusted to fit the child and must be properly secured.
• If your child slides down, pass the crotch belt through the loop on the seat’s
seat pad before attaching it to the waist and shoulder belts.
6. fitting the underseat bag
25
step 1 fitting the underseat bag
The underseat bag is fastened between the wheels of the chassis.
a. Remove the frame from the chassis.
bFit the underseat bag to the chassis in between the
axles of the wheels with the Bugaboo logo facing the
big wheels.
b
c Attach the 2 touch fasteners to the upper centre shaft.
c
dAttach the other 2 touch fasteners to the supports of
the swivel wheels.
d
Note T he underseat bag is made to carry a maximum
weight of 4 kg/8.8 lbs. Before use, ensure that all
the touch fasteners are properly attached.
eng
The underseat bag hangs under the carrycot or seat.
7. going outdoors with the bugaboo cameleon
eng
The Bugaboo Cameleon is designed for use in the city, in rough terrain or in the
2-wheel position.
26
city position
a. Use the 4-wheel position.
b Place the handlebar above the big wheels.
c. Do not fix the position of the swivel wheels.
This is the Bugaboo Cameleon’s most manoeuvrable setting.
b
rough terrain position
a. Use the 4-wheel position.
b Place the handlebar above the swivel wheels.
c. Put the swivel wheels in the fixed position.
With the big wheels at the front, you can easily push the
buggy over uneven ground.
b
2-wheel position
Use the Bugaboo Cameleon in the two wheel position on rough terrain.
step 1 putting the chassis in the 2-wheel position
a. Remove the frame from the chassis.
b. Place the handlebar above the swivel wheels.
cWITHOUT releasing the handlebar, swivel it to the
other side, until it is lying on the floor.
d.Attach the black clamps to the swivel wheel holder on
the thin shaft in between the large wheels. You should
hear a click.
e.Remove the swivel wheels. Check that the big wheels
are properly attached.
c
fRaise the handlebar. The chassis is now in the
2-wheel position.
f
27
step 2 fitting the seat
a. Apply the parking brake.
b.Lay the chassis on the floor with the frame bearers
facing upwards.
c. Completely fold out the seat’s 2 frame supports.
d. Place the seat on the frame bearers.
ePush until you hear a ‘click’ on both sides. The seat is
now attached to the chassis.
e
fPush the handlebar up and move the seat to the
desired position.
f
g.Allow the handlebar to go down. Now place the child
in the seat.
h. Fasten the safety belts.
i. Place the wrist strap on your wrist.
eng
Advice Put the swivel wheels in the underseat bag.
jTake the Bugaboo Cameleon off the parking brake.
i
eng
Note T he 2-wheel position provides much less
sideways stability than the 4-wheel position.
28
surface that is difficult to traverse, or snow
Use the Bugaboo Cameleon in the 2-wheel position if the ground is rough, covered with snow or
covered in loose sand, for example. Choose the 4-wheel position if the ground is hard or compact
sand. You will develop your own preferences for this.
wrist strap
Always use the wrist strap. Ensure that the handlebar does not slip out of your hands.
WA R N I N G S
• Never release the handlebar in the 2-wheel position. The seat may tip over
and the child may fall out and be injured.
• Ensure that all the touch fasteners and fasteners are securely fastened before use.
• Don’t forget that in the two wheel position the seat is not reversible.
• Never use the 2-wheel position in combination with the carrycot.
• Use the wrist strap in the 4-wheel position as well as the 2-wheel position.
• Prevent the Bugaboo Cameleon from falling over sideways in the 2-wheel
position.
• Please remove the swivel wheels when using the two wheel position.
• The Bugaboo Cameleon is not resistant to saltwater. Do not push it in the sea.
The standard version of the Bugaboo Cameleon comes with a sun canopy, rain
cover and mosquito net, so you can protect the child against the sun, wind and
rain, as well as insects.The necessary steps to make the Bugaboo Cameleon
ready for use in good or bad weather are the same for the carrycot and the seat.
Note T he sun canopy, the rain cover and the mosquito net can be used in combination with the
seat up to a length of 53 cm/20,9 inch of the upper body of the child
tailored sun canopy
The sun canopy comprises 2 canopy clamps, 2 removable frames and fabric
step 1 preparing the tailored sun canopy for use
a Pull the frames out of the canopy clamps.
a
b.Lay the sun canopy down with the logo facing
downwards.
c.Push the frames through the slots in the sun canopy
fabric.
dPut the canopy clamps back on the frames. Put the
canopy clamp marked ‘right arm side of child’ on
the side with the Bugaboo label and with the text on
the outside.
e.Put the canopy clamp marked ‘left arm side of child’
on the other side, also with the text on the outside.
Note T he hooks/arrows/brackets on the canopy clamps
always point to the back of the sun canopy.
step 2 fitting the tailored sun canopy
a. Fit the carrycot or seat onto the chassis.
b. Fit the sun canopy to the round side of the frame.
c. Pull the sun canopy over the head end of the frame.
d
29
eng
8. protection against weather and wind
eng
dClick the 2 canopy clamps onto the frame at
the point where there is no rubber.
d
eAttach the elastic bands to the front of the
canopy clamps.
e
f Pull out the sun canopy.
f
30
Advice A
lso use the sun canopy to keep the child out
of the wind.
WA R N I N G S
• Babies have very sensitive skin. Never put a baby in the Bugaboo Cameleon
in the sunlight without fitting the sun canopy.
rain cover
step 1 fitting the rain cover over the tailored sun canopy
a. Fit the sun canopy to the frame and fold it out.
bLay the rain cover with the wide, black edge on the
foot end.
b
c Pull the rain cover over the sun canopy first.
c
d.Ensure that the stitched seams of the rain cover are
aligned with the sun canopy’s frame.
eSlide the holes of the rain cover frame over the
protruding pins on the side of the frame
e
fFinally, pull the wide, black edge over the foot end
of the frame.
f
Note E nsure that the stitched seams of the rain cover are
aligned with the sun canopy’s frame.
31
eng
The rain cover is pulled over the sun canopy or over the sun canopy’s frame. The large frame in the
rain cover is attached to the foot end of the frame.
step 2 fitting the rain cover over the tailored sun canopy’s frame
eng
If you remove the fabric from the sun canopy and fit the rain cover over the frame, the child will
have a full view of outside the buggy.
32
aPull the sun canopy apart. Pull the frame out of the
canopy clamps and out of the fabric.
a
bPlace the clamps on the frame. Insert the frame back
into the canopy clamps.
b
c Pull the frame apart.
c
d.Lay the rain cover with the wide, black edge on
the foot end.
e. Pull the rain cover over the sun canopy’s frame first.
f.Ensure that the stitched seams of the rain cover are
aligned with the sun canopy’s frame.
g.Slide the holes of the rain cover frame over the
protruding pins on the side of the frame.
h.Finally, pull the wide, black edge over the foot end
of the frame.
Note E nsure that the stitched seams of the rain cover
are aligned with the sun canopy’s frame.
using the air vent in the rain cover
Advice You can roll up the air vent and fasten it in place with the touch fastener.
WA R N I N G S
• To prevent the child from overheating, do not leave him/her under the
rain cover if it is not raining.
• Ensure proper ventilation by pressing the touch fasteners of the air vent
together properly.
mosquito net
The mosquito net keeps out insects.
step 1 fitting the mosquito net
a.Fit the sun canopy, with or without its fabric, to the
carrycot or seat.
bWith the washing instructions at the head end,
pull the mosquito net over the sun canopy.
c.Ensure there is a tight fit between the sides of the net
and the carrycot or seat.
b
33
eng
There is an air vent at the front of the rain cover to provide proper ventilation.
a.Press the window’s touch fasteners together properly. The space created between the window
and rain cover is the air opening.
9. travelling and storage
eng
You can easily store the Bugaboo Cameleon, or take it with you in the boot of
your car, for example.
34
step 1 folding the seat or carrycot
Remove the seat or carrycot from the chassis. Remove the carry handle.
Move the handlebar to the lowest position.
folding the seat
a. Remove the seat pad from the seat.
b. Fold the frame supports against the frame.
c. Press the seat flat between the frame.
folding the carrycot
d.Remove the 2 plastic stiffners at the top and bottom
from pockets in the carrycot fabric.
e. Fold out frame supports against the frame.
f. Press the carrycot down flat between the frame.
step 2 folding the chassis and wheels
a.Put the Bugaboo Cameleon chassis in the
4-wheel position.
b. Place the handlebar above the big wheels.
cRelease the handlebar and, pulling it towards you,
place it on the floor.
c
e.The Bugaboo Cameleon can now be put in storage or
transported by car.
Advice Y ou can also store the Bugaboo Cameleon without
its wheels.
AdviceYou can also hang the folded Bugaboo Cameleon
from the handlebar.
d
35
eng
dTake hold of the centre shaft on which the frame bearers
are located and lift everything up. The chassis with the
wheels and handlebar now fall against each other.
10. maintenance and accessories
eng
safety
36
Check the safety of the Bugaboo Cameleon before use. Ensure that the touch fasteners, the brake
and the safety belts are still working properly, the carry handle is attached properly and that the
carrycot or seat is fitted correctly to the chassis. Check whether the Bugaboo Cameleon is damaged. You should ensure that any damaged or worn parts are repaired immediately.
parts
For replacements, only use parts that have been approved by Bugaboo International BV.
To prevent mould, do not fold the Bugaboo Cameleon and accessories when wet or store them in
a damp place.
If the inner tubes of the big wheels are punctured, repair them in the same way that you would
repair a bicycle tire puncture.
cleaning
Clean the Bugaboo Cameleon regularly. Use a moist cloth and mild cleaning agent.
The swivel wheels soon get dirty. Remove them from the holders and clean them with lukewarm
water. Dry them well.
cleaning the fabric
The Bugaboo Cameleon’s fabric is detachable and may be washed in a washing machine.
Wash carefully. Before washing, ALWAYS remove the frame, reinforcements and plastic foam parts.
Note W
hen washing the fabric, remind the following:
- maximum temperature 30 ºC / 85 ºF (warm wash)
- do not use bleach
- do not tumble dry
- do not iron
- do not dry clean
30
The Aerosleep® mattress can be washed at 60oC. With this temperature, the mattress will become
totally clean. The Aerosleep® mattress is lying on top of the thicker mattress and can be taken of
by removing the cover. After washing the fabrics, ensure that all parts are replaced in their original
positions. The Aerosleep® mattress should be replaced on top of the foam mattress.
Tip For further maintenance tips, see the user manual of the service kit.
accessories
the present accessories are:
- Parasol
- Wheeled board
- Foot muff
- Adapters for various car seats, for example Maxi-Cosi® (Mico, Citi, Cabrio and CabrioFix),
Graco® SnugRide®, Peg-Perego Primo Viaggio.*
- Tailored fabric
- Maintenance kit
- Transport bag
- Diaper bag
- Breezy sun canopy
- Sunshade
* Maxi-Cosi®, Graco® and Peg-Perego are registered trade marks of DOREL JUVENILE GROUP EUROPE,
Graco Children’s Products Inc., U.S.A. and Peg Perego SpA, Italy, respectively. Bugaboo is not associated with
or linked to these companies in any way.
37
eng
New accessories are regularly produced for the Bugaboo Cameleon. Full details are provided on
the website www.bugaboo.com or you can ask your supplier for details.
eng
11. warranty
38
As the manufacturer, Bugaboo International BV, which has its principal place
of business in Amsterdam (hereinafter: “Bugaboo”) supplies the Bugaboo
Cameleon (hereinafter: “product”) under warranty, subject to the following
conditions:
1.The warranty period is 24 months, from the date of purchase. The warranty period shall never
be extended, even in the event of repairs being made.
2. This warranty is valid all over the world, except in the United States of America and Canada.
3. The warranty provides a right to repair and specifically not to a product’s exchange or return.
4.Bugaboo shall bear the expense and risk of transport from and to the retailer (hereinafter:
“the retailer”) where you purchased the product, provided the repair is covered by warranty.
5. The warranty may only be invoked if you provide Bugaboo with the following, along with the
defective product:
- a copy of the dated receipt of purchase, and
- a clear description of the complaints.
6. The warranty is not transferable and may therefore only be invoked by the first owner.
7.The warranty does not affect any statutory rights you may have, for example the right to hold
the retailer accountable for defects.
no warranty will be provided in the following circumstances:
- If you have made or arranged for modifications or repairs to be made without written
permission first having been received from Bugaboo or the retailer.
- Defects resulting from neglect or an accident and/or from any use or maintenance other than
that indicated in the user guide.
- If the serial number has been damaged or removed.
- Damage to the product caused by normal wear.
important
The product is covered by a 24-month warranty from the date of purchase. In the event of a
defect, you are requested to first contact your retailer. If the retailer is unable to repair the
defect, you can contact Bugaboo.The warranty only applies if the warranty card has been
completed properly and sent to Bugaboo International BV. Note the serial number of the
Bugaboo Cameleon on your warranty card. The serial number is on the sticker attached to the
centre shaft of the chassis. Keep the user guide and purchase receipt in a safe place.
comment
To enable us to continue to make improvements, please let us know what you think of the
Bugaboo Cameleon’s design, user friendliness, materials or user guide. Write to Bugaboo Service,
PO Box 1299, 1000 BG Amsterdam, or send an e-mail message to [email protected]