Setting Image Size, Quality and Camera Control (Video and Camera) You can perform the following settings on the Video and Camera Page. ● Video Settings: Set up the video capture size and quality. ● Camera Settings: Set up the camera’s shutter speed, focus, Day & Night mode, digital zoom, installation, etc. ● Camera Name: Enter the name of the camera. You will need this name when using VK-64 with the VB-C300. After changing setting click “OK” to return to the Settings Title Page. If you do not want to make any changes, click “CANCEL”. ▼ Video Settings 1 2 1 Video Capture Size Select the Video Capture Size for transmission from “Small”, “Medium”, and “Large”. Small: 160 × 120 (NTSC/PAL) Medium: 320 × 240 (NTSC/PAL) Large: 640 × 480 (NTSC/PAL) 2 Video Quality Select the video quality from 1 - 5 (in 5 levels). Higher value ensures higher quality but larger data size, which may cause lower frame rate. Note 1-8 ● Higher video capture size or quality causes larger data size per frame and heavier network load. After setting, start the NC Viewer and select “Video Information” from the View menu bar to check the data size per frame (→ P.3-18). ● If you are using Network Video Recorder VK-64/VK-16 (optional), the video capture size and quality settings affect the required hard disk space on recording.