Download WELDING INDUSTRIES MC100-0 Instruction manual

PROFESSIONALS PREFER POWERWELD
QUALITY
WELDING,
SAFETY AND
INDUSTRIAL
SUPPLIES
POWERWELD
®
TABLE OF CONTENTS
DESCRIPTION
PAGE
GAS WELDING PRODUCTS
Oxy-Acetylene Outfits..................................................................................................... 3-4
Torches & Cutting Tips.................................................................................................... 5
Pressure Gauges............................................................................................................
6
Regulators, Balloon Fillers, Butane Torches...................................................................
7
Twin and Single Hose.....................................................................................................
8
ARC WELDING PRODUCTS
Electrode Holders...........................................................................................................
9
Ground Clamps.............................................................................................................10-11
Cable Lugs, Chipping Hammers, Cable Connectors.................................................... 12-13
Gouging Torches, Carbons, Welding Cable..................................................................14-15
WELDING MACHINES
Mig Welders, Inverter Stick and Plasma Cutter.............................................................16-17
FILLER METAL PRODUCTS
Tungsten Electrodes....................................................................................................... 18
ER70S6 Mild Steel Wire................................................................................................. 19
Flux Cored Wire.............................................................................................................. 20
Mild Steel & Low Hydrogen Electrodes.......................................................................... 21
Stainless Steel, MIG / TIG Wire, Electrodes................................................................... 22
SAFETY PRODUCTS
Auto Helmets, Economy Helmets, Goggles................................................................. 23-25
Filter & Cover Plates, Magnifiers, Auto Cartridges....................................................... 26-27
Visors, Gold Filter Plates...............................................................................................
28
Welding & Mechanics Gloves, Welding Blankets, Leather Clothing............................29-31
CHEMICAL PRODUCTS
Anti-Spatter, Tip Dip, Lube Pads, Coolant, NDT............................................................
32
MISCELLANEOUS
Cylinder & MIG Carts, Fillet Gauges, C & F Clamps, Hose Reels, Thermometers....... 33-35
Weed Burner, Helmet Bag, Pincers, Soapstone, Hose Repair Kit, Welder’s Kit...........
36
Cable Hitch, Nozzle Reamer, Battery Clamps, Circle Burner, Tungsten Holder,
Cylinder Wrenches, MIG & TIG Torch Holders..............................................................
37
Magnets, Extension Cords............................................................................................
38
Spool Adaptor, Pliers, Welding Table, TIG Feeder, Lug Crimper, Cable Splicer,
TIG Cable Cover.............................................................................................................
INDEX
39
2
OXY-ACETYLENE OUTFITS
METALMASTER
TM
PROFESSIONAL HEAVY DUTY
WELDING AND CUTTING OUTFITS
TWO YEAR WARRANTY
MM-V & MM-H
VICTOR® STYLE
HARRIS® STYLE
Cuts up to 3/4" or 6" with optional cutting tips.
Welds up to 1/2” - 3" with optional welding tips.
Heavy duty combination torch, regulator set and
accessories housed in a quality stainless steel
and metal carrying case for convenient storage.
VICTOR® STYLE OUTFIT
Outfit
Model
Torch
Handle
Cutting
Attach
MM-V
R315
R1060
Outfit
Model
Torch
Handle
Cutting
Attach
MM-H
HC231
HC232
Regulators
Oxy
Acet
Cutting
Tips
Welding
Tips
Heating
Tips
OR-VM AR-VM
1-1-101
1-W
-
Welding
Capacity
Hose
Welding
Cutting
15 FT
Up to
Up to
1/2"
6"
HARRIS® STYLE OUTFITS
OXYGEN REGULATOR
Regulators
Oxy
Acet
OR-VM AR-VM
Cutting
Tips
Welding
Tips
6290-1 23A90-1
Heating
Tips
-
Welding
Capacity
Hose Welding Cutting
15 FT
Up to
1/2"
5"
ACETYLENE REGULATOR
MODEL
STYLE
MODEL
OR-VM
VICTOR®
AR-VM
CUTTING ATTACHMENT
Up to
STYLE
VICTOR®
WELDING TORCH
MODEL
STYLE
MODEL
STYLE
R1060
VICTOR®
R315
VICTOR®
CUTTING ATTACHMENT
MODEL
STYLE
HC232
HARRIS®
WELDING TORCH
MODEL
HC231
STYLE
HARRIS®
GAS WELDING PRODUCTS
3
OXY-ACETYLENE OUTFITS
CAPACITY
CONSISTS OF
Cutting up to 6” (150mm)
Welding up to 3/8” (9mm) steel
FEATURES
Brass & stainless steel construction
torch handle with two stainless steel
needle valves for fast accurate flame
adjustment.
O-ring seals.
Forged and extruded brass for durability.
External torch mounted reverse flow
check valves.
Complete accessory package, hose,
lighter, goggles & tip cleaner.
OXY-ACET KIT
MODEL
APPLICATIONS
STYLE
VICTOR®
MM-VMTB
Precise welding, brazing, soldering,
hard facing, heat/treating and priming,
straightening, deseaming and scarfing,
gouging, flame cleaning, rivet washing
and cutting.
OR-VM Oxygen Regulator
AR-VM Acetylene Regulator
R100 Welding Torch
R1350 Cutting Attachment
3-101 Cutting Tip Size #0
W-1 Welding Tip Size #0
88-3FG Check Valve Set
Twin Welding Hose
Welding Goggles
Flint Lighter
Tip Cleaner
Instruction Manual
Tool Box
TOTE-A-TORCH KIT
Contains all the equipment
you need for cutting,
welding and brazing
anywhere in a rugged
plastic carrying case.
Cuts up to 6” (150mm) and
welds up to 3/8” (9mm)
9/16”-18 “B” Connections
TORCH
HANDLE
CUTTING
ATTACHMENT
R1350
R100
UL LISTED
R
UL LISTED
R
CUTTING
TIP
WELDING
TIP
0-3-101
0-W-1
SINGLE STAGE
OXYGEN
REGULATOR
SINGLE STAGE
ACETYLENE
REGULATOR
313OX
313AC
UL LISTED
UL LISTED
R
R
TOTE-A-TORCH KIT
MODEL
PTK
STYLE
W/O CYLINDERS
TOTE-A-TORCH KIT
MODEL
STYLE
PTK-C
OX-20 OXY CYL /
AC-10 ACET CYL
CHECK
VALVE
ACCESSORIES
CV20R
CV21L
GOGGLES, STRIKER,
12.5’ TWIN HOSE, &
CARRYING CASE
GAS WELDING PRODUCTS
4
COMBINATION TORCHES
MODEL
R100
R1350
R315
R1060
HC231
HC232
STYLE
Victor® 100
Victor® 1350
Victor® 315
Victor® 1060
Harris® 63-2
Harris® 73-2
DESCRIPTION
Medium Duty Welding Torch
Medium Duty Cutting Attachment
Heavy Duty Welding Torch
Heavy Duty Cutting Attachment
Heavy Duty Welding Torch
Heavy Duty Cutting Attachment
CUTTING TORCHES
MODEL
STYLE
Victor®
R1600
R1600-36
Victor®
R1600-48
Victor®
R419
Airco®
62-3E
Harris®
62-3F
Harris®
62-3F/70
Harris®
62-3E36
Harris®
62-3F36
Harris®
62-3F36/70
Harris®
62-3F36/180 Harris®
DESCRIPTION
21”
36”
48”
19”
18”
18”
18"
36”
36"
36"
36"
90º
90º
90º
90º
90º
90º
70º
90º
90º
70º
180º
Heavy Duty, Acetylene
Heavy Duty, Acetylene
Heavy Duty, Acetylene
Heavy Duty, Acetylene
Heavy Duty, Acetylene
Heavy Duty, Propane
Heavy Duty, Propane
Heavy Duty, Acetylene
Heavy Duty, Propane
Heavy Duty, Propane
Heavy Duty, Propane
CUTTING TIPS
VICTOR® STYLE
MODEL
SIZES
FUEL GAS
1-101
000 - 8
Acetylene
3-101
000 - 8
Acetylene
GPN
000 - 8
Propane/Nat Gas
3GPN
000 - 6
Propane/Nat Gas
GPM
000 - 6
Mapp Gas
PowerWeld tips are precision machined from high quality copper alloys for
durability. The gas passages for single piece acetylene tips are accurately
swage-forged and shaped on polished mandrels for smooth, efficient gas
flow. Two piece tips for alternate fuel gases feature an internal spline
configuration that is of the latest design, offering the optimum in cutting
performance. All tips are 100% flame tested.
HARRIS® STYLE
MODEL
SIZES
FUEL GAS
6290
000 - 6
Acetylene
629VVC
000 - 6
Propane/Nat Gas
6290NX
5/0 - 6
Propane/Nat Gas
6290NFF 000 - 6
Propane/Nat Gas
PUROX® STYLE
MODEL
SIZES
FUEL GAS
4202
2-13
Acetylene
4213L
3-10
Propane
AIRCO® / LIQUID AIR® STYLE
MODEL
SIZES
FUEL GAS
144 / 802
00 - 8
Acetylene
164 / 803
00 - 8
Acetylene
261
00-6
Propane/Nat Gas
AFS
72-38
Mapp Gas
SMITH® STYLE
MODEL
SIZES
FUEL GAS
Acetylene
MC-12
00 - 5
SC-12
00 - 6
Acetylene
SC-50
00 - 6
Propane/Nat Gas
GAS WELDING PRODUCTS
5
REPLACEMENT GAUGES
Premium quality replacement gauges are
the industry standard.
Polished drawn brass with one-piece
impact resistant polycarbonate posilock
lens.
For use with compressed gas regulators,
these gauges are an excellent choice for
original equipment and replacement
applications.
Gauges are UL listed.
DESCRIPTION
SIZE
2 1/2"
2"
1 1/2"
1 1/2"
2"
2 1/2"
PSI
30
60
100
200
400
4000
30
60
100
200
400
600
4000
30 CFH
30
CONTENTS
60
100
200
400
4000
COVER
COVER
COVER
PART # 1/4" NPT
PART # 1/8" NPT
A30
A60
A100
A200
A400
A4000
B30
B60
B100
B200
B400
B600
B4000
LEX15
LEX2
LEX25
B30-8
B60-8
B100-8
B200-8
B400-8
B600-8
B4000-8
R-CFH
C30
CCG
C60
C100
C200
C400
C4000
Lexan Gauge Cover
Lexan Gauge Cover
Lexan Gauge Cover
PACKAGING: 10 per carton
GAS WELDING PRODUCTS
6
REGULATORS
ARGON FLOWMETER
MODEL
314RH
DESCRIPTION
C/W 10' HOSE
Single stage light duty argon
flowmeter regulator. Designed
for accurate control of gas
flow for MIG and TIG
applications. c/w 10' argon
hose and fittings.
ARGON FLOWMETER
MODEL
DESCRIPTION
100FL-AR60H
C/W 10' HOSE
ARGON FLOWMETER
BALLOON FILLERS
Single stage piston design
professional argon flowmeter
regulator. Preset pressure at 50 PSI.
Designed for accurate control of gas
flow for MIG and TIG applications.
c/w 10' argon hose and fittings.
MODEL
DESCRIPTION
PW195FM
FLOWMETER
BALLOON INFLATOR
MODEL
GD92
STYLE
DELUXE
BUTANE TORCH
Deluxe Balloon Inflator GD92
Rugged all brass body, "Piston Type" mechanism, drilled and tapped
for tie hook and string cutter. Body contains an additional 1/4" NPT
port to accommodate a second filler valve if desired.
Plastic hand tight CGA 580 inlet connection with sintered bronze
inlet filter.
1-1/2" rear entry cylinder contents gauge.
Rubber tilt valve.
BUTANE TORCH
MODEL
PW2020
STYLE
BUTANE GAS
Balloon Inflator Economy GD93
BALLOON INFLATOR
MODEL
GD93
STYLE
ECONOMY
Features straight through construction,
rugged brass body, "Piston Type"
mechanism.
Hand tight CGA 580 inlet connection with
sintered bronze inlet filter.
Rubber tilt valve.
Balloon Inflator Mylar GD95
GD95 is suitable for filling standard latex and auto-fill
mylar balloons.
Rugged all brass body and "Piston-Type" mechanism.
Drilled and tapped for a tie hook and a ribbon cutter.
Automatic shut-off mylar filler to prevent over filling and
bursting of expensive mylar balloon. Large plastic hand
tight CGA 580 inlet connection
BALLOON INFLATOR with sintered bronze inlet filter. 11/2" rear entry color-coded
MODEL
STYLE
cylinder contents gauge.
GD95
MYLAR
PowerWeld Butane Gas Micro Torch PW2020
Electronic instant ignition system
Adjustable flame
Refillable butane fuel
Max attainable temperature 2370ºF
Safety ignition lock
SOLDERING HEAD
MODEL
SH11
STYLE
BUTANE GAS
HOT REFLECTOR
MODEL
SA51
STYLE
BUTANE GAS
HOT BLOWER HEAD
MODEL
SH51
STYLE
BUTANE GAS
GAS WELDING PRODUCTS
7
TWIN & SINGLE HOSE
TWIN WELDING HOSE GRADES R & T
SIZE ID
LENGTH
GRADE R GRADE T
ITEM #
ITEM #
DESCRIPTION
3/16"
600' Reel
Twin Oxygen/Fuel Hose (Reels)
316TR
316TT
1/4"
600' Reel
Twin Oxygen/Fuel Hose (Reels)
14TR
14TT
516TR
516TT
5/16"
600' Reel
Twin Oxygen/Fuel Hose (Reels)
3/8"
600' Reel
Twin Oxygen/Fuel Hose (Reels)
38TT
TWIN WELDING HOSE GRADES R & T
DESCRIPTION
3/16”
3/16”
3/16”
3/16”
1/4”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
GRADE R
ITEM #
LENGTH
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
Twin Welding Hose Assemblies
12.5’
25’
50’
100’
12.5’
25’
50’
100’
25’
50’
100’
25’
50’
100’
PW316-12
PW316-25
PW316-50
PW316-100
PW14-12
PW14-25
PW14-50
PW14-100
PW516-25
PW516-50
PW516-100
GRADE T
ITEM #
PW14-25T
PW14-50T
PW14-100T
PW516-25T
PW516-50T
PW516-100T
PW38-25T
PW38-50T
PW38-100T
Green hose for Oxygen
Red hose for Acetylene
Heat resistant EPDM tube
and cover. 2 spiral polyester
yarn reinforcement, more
flexible than braid reinforced
hose, easier to coil and
handle. Conforms to
RMA/CGA specifications.
Working pressure 200 PSI,
1.38 Mpa
SINGLE
ACETYLENE
HOSE
ASSEMBLY
SINGLE HOSE GRADE R
SIZE ID
ITEM #
ACETYLENE
ITEM #
OXYGEN
LENGTH
DESCRIPTION
3/16
800’ Reel
Single line hose
316OX
1/4"
600' Reel
Single line hose
14OX
14AC
5/16"
600' Reel
Single line hose
516OX
516AC
3/8"
600' Reel
Single line hose
38OX
38AC
316AC
GREEN GP/OXYGEN HOSE
SIZE ID
1/2"
LENGTH
500’ Reel
O.D. (in.)
15/16
WORKING PRESSURE
300
3/4"
500’ Reel
1-3/16
300
ITEM #
12OX
ITEM #
AH12A
AH12B
AH25A
DESCRIPTION
3/16"X12' A-A
3/16"X12' B-B
3/16"X25' A-A
34OX
SINGLE ARGON HOSE
ITEM #
DESCRIPTION
PW-AH6
1/4" x 6' black inert hose assembly
PW-AH10
1/4" x 10' black inert hose assembly
PW-AH25
1/4" x 25' black inert hose assembly
PW-AH50
1/4" x 50' black inert hose assembly
PW-AH100 1/4" x 100' black inert hose assembly
Pre-assembled 1/4" I.D. inert arc hose assemblies for MIG and TIG applications.
5/8"-18 RH male connections at each end. Maximum working pressure - 200 PSI.
Available from stock in five popular lengths.
GAS WELDING PRODUCTS
8
ELECTRODE HOLDERS
SHORTSTUB TYPE
• Lightweight - easy to use
• Better maneuverability - great for tight places
• Excellent for vertical welding
• Grips the electrode nearer to the end
• Allows use of 20% more of the electrode
BERNARD® STYLE
MODEL
REPLACEMENT HEADS
MODEL
AMPS
RK-4
400
RK-6
600
AMPS
4B
400
6B
600
JAW TYPE
• Made from a high copper alloy for maximum
conductivity and strength
• Long top and bottom tip insulators are fibreglass
to withstand intense heat and impact
• Suitable for heavy duty applications
• Oval-point screw cable connections on all
models
LENCO® STYLE
MODEL
AMPS
RAF-200
200
RAF-250
250
RAF-300
300
RAF-350
350
RAF-500
500
TWECO® STYLE
MODEL
AMPS
A532
200
A316
250
A732
300
ARC WELDING PRODUCTS
9
GROUND CLAMPS
TWECO® STYLE
MODEL
AMPS
EL-200
200
EL-300
300
EL-500
500
Manufactured from hot dip galvanized
•steel
with forged brass conductors
Heavy-duty springs provide positive
•strength
at jaws
Manufactured from heavy duty nickel•plated
steel with forged brass conductors
and braided copper strap
Heavy-duty spring provide positive
•strength
at jaws
Cable is easy to install with built-in cable
•connector
and oval point screw
LENCO® STYLE
MODEL
GR-200
AMPS
200AMP
GR-300
300 AMP
GR-500
500 AMP
ALERCO® STYLE
MODEL
AMPS
AGC-200
200
AGC-300
300
AGC-500
500
Manufactured from high copper alloy
•assures
excellent current carrying ability
Large
contact
area
•
•Serrated upper and lower jaws
Mechanical oval-point screw cable
•connection
Double lock clamps have forged
•copper
alloy conductors
High clamping pressure and long
•finger-grip
levered handles for easy
JACKSON® STYLE
MODEL
AMPS
GC-2
200
GC-3
300
GC-5
500
jaw opening
TWECO® STYLE
MODEL
AMPS
GCT200
200
GCT300
300
GCT500
500
Manufactured from 98% copper alloy with
•forged
brass conductors
Heavy-duty fully insulated springs provide
•positive
strength at jaws
ARC WELDING PRODUCTS
10
GROUND CLAMPS
Heavy duty screw type ground
•clamp
•Jaws are adjusted by screw lever
•Rubber insulated cable connector
•Design for MIG welding process
•Powerful bite and swivel pad
Full 2" opening with a copper
•coated
steel pressure screw
Cable attaches with two oval-point
•screws
and comes with connector
SCREW TYPE
MODEL
AMPS
GCC-600
600
“C” CLAMP TYPE
MODEL
AMPS
ECWG60C
600
insulator
Manufactured from nickel-plated steel
•with
forged brass conductors
Large contact area with strong gripping
•power
•Insulated to prevent annealing
•Easy installation or removal
Manufactured from nickel-plated steel
•with
forged brass conductors
Large contact area with strong gripping
•power
•Insulated to prevent annealing
•Easy installation or removal
•Swivel connector for welding cable
ECR1000-2
•Heavy duty forged brass construction
Two cable connectivity for efficient
•grounding
connection
•Outer face revolves with full swivel action
Strong tension spring to ensure maximum
•connection
•Easy installation or removal
ROTARY MAGNETIC
MODEL
ECM50R
AMPS
500
ROTARY MAGNETIC
MODEL
ECM60R
AMPS
600
ROTARY “C” CLAMP
MODEL
ECR800-2
ECR1000-2
AMPS
800
1000
ECR800-2
ARC WELDING PRODUCTS
11
CABLE LUGS & SPLICERS
HAMMER ON LUG
PART #
CABLE SIZE
RL11
SIZE 3/0 TO 4/0
RL22
SIZE 1/0 TO 2/0
RL33
SIZE 4 TO 1
HAMMER SPLICER
PART #
Manufactured from heavy wall cast copper alloy, annealed for
•maximum
conductivity
Fast, easy installation - just slide in cable and strike it with
•hammer
for durable connection
CABLE SIZE
RS11
SIZE 3/0 TO 4/0
RS22
SIZE 1/0 TO 2/0
RS33
SIZE 4 TO 1
SOLDER LUG
Manufactured from heavy wall cast copper
•alloy,
annealed for maximum conductivity
Long length and flared ends make installation
•fast
and easy
PART #
CABLE SIZE
RL3040
SIZE 3/0 TO 4/0
RL1020
SIZE 1/0 TO 2/0
RL12
SIZE 4 TO 1
SOLDER SPLICER
CHIPPING HAMMERS
PART #
CABLE SIZE
RS3040
SIZE 3/0 TO 4/0
RS1020
SIZE 1/0 TO 2/0
RS12
SIZE 4 TO 1
SPRING HANDLE STEEL SHAFT
SPRING HANDLE STEEL SHAFT
Most popular model
Similar to Lenco® LH-1
Similar to Atlas H
Wire spring handle
Drop forged heat treated head
Welded-on head - Cannot come loose
Similar to Lenco® LHC-1
Similar to Atlas HCP
Wire spring handle
Drop forged heat treated head
Welded-on head - Cannot come loose
CHIPPING HAMMER
MODEL
RLH-1
STYLE
POINT/CHISEL
CHIPPING HAMMER
WOOD HANDLE
MODEL
STYLE
RLHC-1
POINT/CROSS CHISEL
CHIPPING HAMMER
MODEL
STYLE
Similar to Lenco® LWHH
POINT/CHISEL
RLHWH
Similar to Atlas WH-20
Similar to Atlas WH-30
RLHWH-30 POINT/CROSS
CHISEL
Drop forged heat treated heads
attached to handle with steel and
wood wedges
WOOD HANDLE STEEL SHAFT
Similar to Lenco® LHW-1
Similar to Atlas J
This model has the wood handle preferred by
many welders
CHIPPING HAMMER
Drop forged heat treated head
MODEL
STYLE
Welded-on head - Cannot come loose
RLHW-1 POINT/CHISEL
ARC WELDING PRODUCTS
12
CABLE CONNECTORS
Designed to efficiently conduct the current through a detachable type connector. Brass bodies are precision machined.
Cam action design allows lock in with a twist and pulls the two halves together tightly. Connector covers are resistant
to heat, cold, abrasion, ozone, oils & solvents. Tapered ends lock out moisture, oil and dirt.
Connector covers are specially compounded to be flame retardant.
LENCO® STYLE
PART #
DESCRIPTION
SUITABLE FOR
CABLE SIZES
PKG
Complete Connector
#1 - 4/0
50 / CS
LC40M
Male Half
#1 - 4/0
100 / CS
LC40F
Female Half
#1 - 4/0
100 / CS
Heavy Duty Connector
#1/0 - 4/0
50 / CS
Complete Connector
#4 - #1
50 / CS
LC10M
Male Half
#4 - #1
100 / CS
LC10F
Female Half
#4 - #1
100 / CS
LC40
LC40HD
LC10
LS40
Black Sleeve only
N/A
50 / CS
LS40B
Blue Sleeve only
N/A
50 / CS
LS40R
Red Sleeve only
N/A
50 / CS
LS40Y
Yellow Sleeve only
N/A
50 / CS
LC1040M
Whip Connector
#4 - #1
100 / CS
DINSE® STYLE
SUITABLE FOR
CABLE SIZES
PART #
DESCRIPTION
CCD1025
Complete Connector
#4 - #2
50 / CS
PKG
CCD1025-M
Male Half
#4 - #2
100 / CS
CCD1025-F
Female Half
#4 - #2
100 / CS
Complete Connector
#2 - 1/0
50 / CS
CCD3550-M
Male Half
#2 - 1/0
100 / CS
CCD3550-F
Female Half
#2 - 1/0
100 / CS
Complete Connector
2/0 - 4/0
50 / CS
CCD5070-M
Male Half
2/0 - 4/0
100 / CS
CCD5070-F
Female Half
2/0 - 4/0
100 / CS
CCD3550
CCD5070
TWECO® STYLE
PART #
DESCRIPTION
SUITABLE FOR
CABLE SIZES
PKG
1MBP
Complete Connector
#4 - #1
50 / CS
2MBP
Complete Connector
1/0 - 2/0
50 / CS
2MBP-M
Male Half
1/0 - 2/0
100 / CS
2MBP-F
Female Half
1/0 - 2/0
100 / CS
Complete Connector
3/0 - 4/0
50 / CS
4MBP
TERMINAL CONNECTIONS
PART #
DESCRIPTION
SUITABLE FOR
CONNECTOR
PKG
TE-1AF
45º Terminal
LC10
50 / CS
TE-2AF
45º Terminal
LC40
50 / CS
TE-20F
180º Terminal
LC40
50 / CS
CCD3550
50 / CS
TE-A-3595
DA-5095
45º Dinse
Adaptor - Dinse Male, LC40F
•Positive lock-tight action
Brass bodies are precision machined
•from
heavy specially shaped brass
extrusion
action design of male half
•Cam
connector pulls the two halves tightly
together
with Lenco® and other
•Compatible
popular style connectors
•Popular Dinse® Style connector
•Positive lock-tight action
Brass parts are precision machined
•from
heavy specially shaped brass
extrusion
Cam action design of male half
•connector
pulls the two halves
tightly together
•Positive lock-tight action
Brass parts are precision machined
•from
heavy specially shaped brass
extrusion
Cam action design of male half
•connector
pulls the two halves tightly
together
Compatible with Tweco® and other
•popular
style connectors
•Positive lock-tight action
Brass parts are precision machined
•from
heavy specially shaped brass
extrusion
Terminal connectors replace cable
•lugs
for fixture to machines allowing
for quick disconnect of cables
ARC WELDING PRODUCTS
13
GOUGING TORCH
For gouging, cutting, beveling, piercing and flushing metal. The Gouging
Torch is designed to remove any kind of metal by the “Air Carbon-Arc”
process which is more economical than older methods such as burning,
chipping and grinding.
RK4000 GOUGING TORCH
MODEL
AMPERAGE
CABLE ASS’Y
RK4000
1000 AMPS
7’ SWIVEL CABLE
POINTED GOUGING CARBONS
Used for gouging out defective welds and cutting non-ferrous metals.
Consistent copper coating insulates against side burn through, offers improved
conductivity. Electrodes are 12” in length.
COPPER COATED DC POINTED GOUGING CARBONS
Item # Packaging
DC18 100 per box
DC532 50 per box
DC316 50 per box
DC14
50 per box
DC516 50 per box
DC38
50 per box
DC12
50 per box
Carton Packaging:
Size (Inches)
1/8” X 12”
5/32” X 12”
3/16” X 12”
1/4” X 12”
5/16” X 12”
3/8” X 12”
1/2” X 12”
Size (MM)
3.25mm X 305mm
4.0mm X 305mm
4.8mm X 305mm
6.4mm X 305mm
7.9mm X 305mm
9.5mm X 305mm
12.7mm X 305mm
1/8” Diameter - 500 per Carton - All other sizes - 250 per Carton
JOINTED GOUGING CARBONS
•Eliminates stub loss and provides continuous electrode feed especially for semi-automatic torches
•Machined at each end to provide male and female fit up
•Used for gouging out defective welds and cutting non-ferrous metals
•Consistent copper coating insulates against side burn through, offers improved conductivity
•Electrodes are 17” in length
COPPER COATED DC JOINTED GOUGING CARBONS
Item #
DCJ-38
DCJ-12
DCJ-58
DCJ-34
Packaging
25 per box
25 per box
25 per box
25 per box
Size (Inches)
3/8” X 17”
1/2” X 17”
5/8” X 17”
3/4” X 17”
Size (MM)
9.5mm X 440mm
12.7mm X 440mm
15.9mm X 440mm
19.1mm X 440mm
Carton Packaging: All Diameters - 25 per Box - 100 per Carton - 400 per Master Carton
ARC WELDING PRODUCTS
14
WELDING CABLE
Convenient Cut Length Cable in Boxes
PowerWeld carries inventory of the most popular welding and
primary cable sizes in convenient pre-cut lengths of 50’ and
100’. These lengths are attractively boxed and ready to go right
off the shelf for clean and trouble free cable sales.
Flex-a-prene 600 volt all-weather grade welding cable is rated at
-50ºC to +105ºC giving it outstanding cold weather flexibility. Made
with a special jacketing compound, this standard stock welding
cable gives you high flexibility without sacrificing weather
resistance. A combination that means better performance at any
location. And when you add enhanced dielectric strength to its list
of properties, it's no wonder we invite you to compare Flex-a-prene
30 AWG 600 volt welding cable to any other.
Meets or exceeds ASTMB-172
Part #
4-50
4-100
2-50
2-100
1-50
1-100
1/0-50
1/0-100
2/0-50
2/0-100
3/0-50
3/0-100
4/0-50
4/0-100
10/3-100
10/4-100
Specification Data
AWG
SIZE
STRANDING
NOM.
INSULATION
THICKNESS
(INCHES)
NOM.
O.D.
INCHES
APPROX.
POUNDS
PER 1000
FEET
6
259 X 30
.060
.320
128
4
364 X 30
.060
.348
162
2
624 X 30
.060
.420
260
1
780 X 30
.080
.503
328
400
1/0
988 X 30
.080
.533
2/0
1235 X 30
.080
.586
490
3/0
1539 X 30
.080
.625
596
4/0
2014 X 30
.080
.720
800
Size
50 ft #4
100 ft #4
50 ft #2
100 ft #2
50 ft #1
100 ft #1
50 ft #1/0
100 ft #1/0
50 ft #2/0
100 ft #2/0
50 ft #3/0
100 ft #3/0
50 ft #4/0
100 ft #4/0
100 ft #10/3
100 ft #10/4
Descripton
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Welding Cable
Power Cable
Power Cable
WHIP CABLE ASSEMBLIES
Whip cable is highly flexible with annealed 36 (.005) gauge bare copper
conductor, insulated with an orange EPDM jacket and paper separator.
Operating temperatures range from -50°C to +105°C (-58°F to +221°F).
Rated to 600 volts. Meets or exceeds ASTMB-172.
10 feet #2 cable
with 4B holder and
male connector
10 feet #1 cable
with 4B holder and
male connector
WHIP CABLE ASS’Y
WHIP CABLE ASS’Y
MODEL
2-WA
STYLE
10 FEET #2
MODEL
1-WA
STYLE
10 FEET #1
ARC WELDING PRODUCTS
15
MIG FLUX CORED WELDER
GAS / NO GAS
Welder Specifications
115V/25-130 Amps
Welds up to 4.0 mm
MIG WELDER
MODEL
STYLE
MM-130E
115V
Primary (input) Volts:
120 Vac
Primary (input) Amps:
20
Phase:
Single
Frequency:
60HZ
Secondary (output) Volts:
17.5
Secondary (CSA output) Amps:
65
Open Circuit Voltage (Max):
34 Vdc
Duty Cycle Rating:
20%
Welder Specifications
MIG WELDER
MODEL
STYLE
MM-180E
230V
Dimensions: 18"(470mm) x
9.4"(240mm) x 12.0"(305mm)
Net Weight: 47 lb (21.5 kg)
Warranty: Two Years
Description: MM-130E wire feed welder is designed for maintenance and
sheet metal fabrication. The welder consists of a single-phase power
transformer, stabilizer, rectifier, and a unique built-in control/feeder. You
can weld sheet metal from 24 gauge up to 3/16" thick with a single pass.
You can weld thicker steel with bevelling and multiple pass techniques.
Tweco® style nozzles and contact tips.
GAS / NO GAS
230V/25-180 Amps
Welds up to 6.0 mm
COMES COMPLETE WITH:
Gun and cable assembly
6 ft (1.8 m) work cable with clamp
Argon Flowmeter with hose
Sample spool of .030 in (0.8 mm)
self
shielding flux cored wire.
Spare contact tips
6 ft (1.8 m) Power cord with plug.
Instruction Manual
Primary (input) Volts:
230 Vac
Primary (input) Amps:
25
Phase:
Single
Frequency:
60HZ
Secondary (output) Volts:
21.3
Secondary (CSA output) Amps:
145
Open Circuit Voltage (Max):
35 Vdc
Duty Cycle Rating:
15%
COMES COMPLETE WITH:
Gun and cable assembly
6 ft (1.8 m) work cable with
clamp
Argon Flowmeter with hose
Sample spool of .030 in (0.8 mm)
self
shielding flux cored wire.
Spare contact tips
6 ft (1.8 m) Power cord with plug.
Instruction Manual
Dimensions: 18" (470mm) x 9.4"
(240mm) x 12.0" (305mm)
Net Weight: 59 lb (27 kg)
Warranty: Two Years
Description: MM-180E wire feed welder is designed for maintenance and
sheet metal fabrication. The welder consists of a single-phase power
transformer, stabilizer, rectifier, and a unique built-in control/feeder. You
can weld sheet metal from 24 gauge up to 1/4" thick with a single pass. You
can weld thicker steel with bevelling and multiple pass techniques. Tweco®
style nozzles and contact tips.
WELDING MACHINES
16
INVERTER WELDERS
INVERTER STICK WELDER
CARiARC 90
90 Amp-20% Duty Cycle
120VAC 1 Phase 60Hz
Weight 4.5kg (10lbs)
TWO YEAR WARRANTY
TIG OPTION
CARiARC 90A
AWP17V-12-2D TIG Torch
100FL Flowmeter
WP17AK Parts Kit
Power Supply (V)
No-Load Voltage (V)
Output Range (A)
Duty Cycle (%)
Suggested Electrode
Electrode Diameter (inch)
Length x Width x Height
Welder Weight Kg (lbs)
Model
CARiARC 90A comes
complete with lead cable and
electrode holder, ground
cable with clamp, shoulder
strap and sample electrodes
all contained in a sturdy BMC
carry case for convenience
and portability.
1 ph - 120V - 60HZ
75V
20 - 90A
20%
E6013, E7014, E7018, E6011
1/16", 5/64", 3/32"
300mm-120mm-240mm (12"-5"-9")
4.5 kg ( 9.9 lbs )
CA-90A
TIG ACCESSORIES
MODEL
STYLE
CA-TIG
ACCESSORIES
INVERTER PLASMA CUTTER
HC40PLUS
40 Amp-35% Duty Cycle
230VAC 1 Phase 60Hz
Weight 9 kg (21lbs)
TWO YEAR WARRANTY
HC40PLUS PLASMA CUTTER
Power Supply (V)
No-Load Voltage (V)
Output Range (A)
Duty Cycle (%)
Air Pressure
Power Switch
Length x Width x Height
Welder Weight (lbs)
Torch Length
Model
1 ph - 230V - 60HZ
340V
15 - 40A
35% @ 40A
4.5 CFM @ 60 PSI
250 Volts AC 30 Amps
17.7" x 6.7" x 9.0"
9 kg (21 lbs)
5.5m (18.5')
HC-40PLUS
PLASMA PARTS
PWPR0110
Electrode (Pkg 3)
PWPE0106
Gas Diffuser(Pkg 2)
PWPC0116
Outer Cover Cutting
Nozzle (PKG 1)
PWPD011608
Cutting Nozzle
0.8mm (Pkg 3)
HC40PLUS is an IGBT inverter
plasma cutter with thermal
overload protection, a Trafimet®
torch and a built-in gas regulator.
This easy to use plasma cutter
has the power to cut up to 3/8"
materials and a pilot arc that
makes cutting expanded metal
possible. This machine requires
single phase 230 Volt (220V240V), 60 Hz input power.
WELDING MACHINES
17
TUNGSTEN ELECTRODES
PowerWeld offers six types of tungsten electrode to cover every TIG welding application. Electrodes are 7"
(175mm) in length and packaged 10 rods per box. All tungstens have color coded tips for easy identification, and
meet AWS A5.12 specifications. Electrodes are supplied with a smooth, round, bright centerless ground finish.
Dia
in. (mm)
Type
Part #
Voltage
Composition
99.5% Tungsten
0.5% Other
Materials
Welded
Pure (EWP)
Unalloyed tungsten electrodes. Provide good stability
when used with alternating current, either balanced
wave or continuously high frequency stabilized.
Maintain a clean, balled end which is preferred for
aluminum and magnesium welding.
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
PUR040
PUR116
PUR332
PUR18
PUR532
AC
Aluminum
Magnesium
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
2PC040
2PC116
2PC332
2PC18
2PC532
DC
97.3% Tungsten
1.7%-2.2% Thorium
0.5% Other
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
ZIR040
ZIR116
ZIR332
ZIR18
ZIR532
AC
98.6% Tungsten
0.7%-0.9% Zirconium
0.5% Other
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
CER040
CER116
CER332
CER18
CER532
DC
AC Inverters
97.3% Tungsten
1.8%-2.2% Cerium
0.5% Other
Carbon Steel
Stainless Steel
Nickel Alloy
Titanium
Aluminum
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
RE040
RE116
RE332
RE18
RE532
98.3% Tungsten
0.8-1.2%Lanthanum
0.5% Other
Carbon Steel
Stainless Steel
Nickel Alloy
Titanium
Aluminum
2% Thoriated (EWTh-2)
Thoria alloy increases electrode life. Higher electron
emissions result in better arc starting and arc stability.
Maintains a sharp point. Resistance to tungsten
contamination of the weld.
Carbon Steel
Stainless Steel
Nickel Alloy
Titanium
Copper
Zirconiated (EWZr-1)
Preferred electrode for applications where tungsten
contamination of the weld must be minimized.
Performs well with alternating current as it retains a
balled end during welding.
Aluminum
Magnesium
2% Ceriated (EWCe-2)
Provides easy arc starting, improved arc stability and
reduced rate of vaporization or burn-off. Operates well
with alternating current or direct current, either polarity.
1% Lanthanated (EWLa-1)
Provides easy arc starting, improved arc stability and
reduced rate of vaporization or burn-off. Operates well
with alternating current or direct current, either
polarity.
DC
AC Inverters
1.5% Lanthanated (EWLa-1.5)
Provides easy arc starting, improved arc stability
and significantly reduced tip erosion rate. Operates
well with alternating current or direct current, either
polarity.
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
LAN15040
LAN15116
LAN15332
LAN1518
LAN15532
DC
AC Inverters
97.8% Tungsten
1.3%-1.7% Lanthanum
0.5% Other
Carbon Steel
Stainless Steel
Nickel Alloy
Titanium
Aluminum
0.040(1.0)
1/16(1.6)
3/32(2.4)
1/8(3.2)
5/32(4.0)
TM040
TM116
TM332
TM18
TM532
DC
AC Inverters
Tungsten
Lanthanum
Cerium
Yytrium
Carbon Steel
Stainless Steel
Nickel Alloy
Titanium
Aluminum
Tri-Mix (EWG)
Tri-Mix tungsten electrode (AWS classification EWG)
combines three non-radioactive rare earth materials
(La2O3, Y2O3, CeO2) into one tungsten. Extensive
testing has resulted in the development of an optimum
composition blend for a high performing tungsten
electrode. Performance features include: Easy arc
starting and re-ignition, high arc pressure, very good
arc stability, excellent endurance. Suitable for carbon
steel, stainless steel, copper and aluminum. AC or DC
applications.
FILLER METAL PRODUCTS
18
MILD STEEL WIRE
Specifications
AWS A5.18 Class ER70S-6
Certified by CWB
to CSA W48-Class ER49S-6
Description
S6 contains high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning
procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the
highest tensile strength (as welded) of the plain carbon steel wires. The high silicon content increases the fluidity of
the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. S6 is excellent
where poor fit-ups or rusty and oily plates may be used.
Applications
Construction work, tanks, truck bodies, farm implements, pipes, steel castings or forgings, shaft build-ups and
general shop fabrications.
SPOOL SIZES
DIAMETER
1KG (2.2LB) 5KG (11LB) 15KG (33LB) 20KG (44LB) 250KG (550LB)
S60615
0.6mm (.023”)
S6061
S6065
0.8mm (.030”)
S6081
S6085
S60820
0.9mm (.035”)
S6091
S6095
S60920
S609250
1.2mm (.045”)
S6121
S6125
S61220
S612250
1kg spools are packaged 18 spools per master carton.
20kg spools are packaged 60 spools (1200kg) per pallet.
250kg drums are packaged 2 drums (500kg) per pallet.
Typical chemical
composition of
welding wire (%)
Mechanical
Properties of
Deposited Metal
Wire Size (mm)
Recommended
Welding Current (A)
C
Mn
0.06-0.15
1.40-1.85
Yield strength (Mpa)
Si
0.80-1.15
Tensile strength (Mpa)
≥ 500
≥ 420
0.8
40 - 140
P
≤ 0.025
0.9
1.2
1.6
50 - 220
80 - 350
120 - 550
S
≤ 0.035
Cr
Ni
-
-
C
≤ 0.050
Elongation (%)
AKV impact (J)
≥ 22
≥ 27@-29º
Welding Positions
FILLER METAL PRODUCTS
19
FLUX CORED WIRE
E71T-GS ALL POSITION
SELF-SHIELDING - GASLESS
Features
No Shielding Gas Needed
Single Pass Welding of Thin Gauge Galvanized Steel
Excellent for Outdoor Use
Smooth Arc – Minimal Spatter
DC- Straight Polarity
Works Well In Wind
Description
Smooth Core gasless wire E71T-GS is an all-position, self-shielded flux-cored
wire designed for single pass fillet and lap welding on galvanized or carbon steel
as thin as 20 gauge, without burn-through. Gasless wire E71T-GS is commonly
used on small portable 110 volt welding machines, offering smooth arc action with
very little spatter. Travel speed is fast, penetration is good and slag removal is
easy.
Applications
Smooth Core gasless wire E71T-GS is most popular for the home workshop
welder because it works so well on 110 volt machines and can be used on thin
gauge steel. Gasless wire E71T-GS is used quite extensively in automobile body
shops for door or body repairs and it is also used for sheet metal duct work on lap
and butt joints.
NOTE: As with all self-shielded wires, Smooth Core gasless wire E71T-GS does
contain fluoride compounds, which require more attention to ventilation when
being used to weld galvanized steel. The zinc oxide formed during welding should
not be inhaled as it can cause metal fume fever. When welding indoors or in an
enclosed area, be sure that the ventilation is adequate.
TYPE E71T-GS
Item Number Diameter / Package
FC0302
.030 Dia. X
FC03010
.030 Dia. X 10# Spool
FC03033
.030 Dia. X 33# Spool
FC0352
.035 Dia. X 2# Spool
FC03510
.035 Dia. X 10# Spool
FC03533
.035 Dia. X 33# Spool
FC0452
.045 Dia. X 2# Spool
FC04510
.045 Dia. X 10# Spool
FC04533
.045 Dia. X 33# Spool
2# Spool
E71T-1 ALL POSITION
PowerWeld E71T-1 is a rutile type flux cored wire designed for general purpose all position welding with 100% CO2 or a
80% Argon - 20% CO2 mixture shielding gas. Features excellent welding performance and higher welding efficiency
than traditional welding wires with its smooth arc characteristics, while producing low spatter and low fume emissions.
Used for single and multiple pass welding of mild steel and 490 Mpa (70,000 PSI) grade high tensile steel. Applications
include structural steel fabrication, pressure vessels, bridges, machinery etc.
Classification: E71T-1 per AWS A5.20, ASME SFA5.20
Approvals:
CWB to CSA W48-01, E491T-1H8
ABS 3YAH10
LR 3SMH10
TYPE E71T-1
DNV III YMSH10
Item
Number
Diameter / Package
BV SA3YMH10
PW711215
.045 Dia. (1.2mm) X 33# (15kg) Spool
PW711615
1/16 Dia. (1.6mm) X 33# (15kg) Spool
Available Diameters: 1.2mm (.045”) , 1.6mm (1/16”)
Spool Size:
15 kg (33 lb)
Pallet Quantity:
72 spools - 1080 kg (2376 lb)
Welding Current:
DC + reverse polarity - electrode positive
FILLER METAL PRODUCTS
20
MILD STEEL ELECTRODES
PowerWeld 6013
PowerWeld 6013 is a high titania coated electrode. This electrode provides good wetting and
shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with
sufficient penetration for welding medium gauge steel. PowerWeld 6013 is an all-purpose electrode
that provides a soft steady arc which is easily regenerated, easy slag control for vertical-down
welding, low spatter and a beautiful bead appearance. PowerWeld 6013 electrodes may be used in
any position with AC or DC (straight or reverse polarity).
Applications
PowerWeld 6013 is commonly used for automobile bodies, truck frames and bodies, ornamental iron,
metal furniture, farm implementations, machinery guards, storage tanks, or wherever appearance is
important or desirable.
PowerWeld 7014
PowerWeld 7014 is an iron power, rutile type electrode providing high deposition rates and fast
travel speed. This electrode provides a stable arc, flat smooth bead appearance and easy slag
removability PowerWeld 7014 is used for all position, single-pass and multi-layer welding
applications. AC or DC (straight or reverse polarity) may be used.
Applications
Typical applications include: ship structures, bridges, structural steel for buildings, sheet metal,
ornamental iron, auto bodies and fenders, machine parts, storage tanks, etc.
POWERWELD
7018
LOW
HYDROGEN
ELECTRODES
PowerWeld 7018 is a low-hydrogen electrode for use in all positions on low, medium and highcarbon steels. 70,000 PSI tensile strength. Ideal for out of position welding and tacking. Runs on AC
or DCEP (reverse) polarity. Features a steady arc with low spatter and medium penetration,
providing X-ray quality weld deposits.
PowerWeld 7018
Applications
PowerWeld 7018 is typically used for heavy machinery fabrication, pressure vessels, field and shop
welding of bridges and structural steels, cast steels and shipbuilding, or most ASTM specifications
on medium carbon and low alloy steels.
PowerWeld 7018AC
PowerWeld 7018AC is a low-hydrogen electrode for use in all positions on low, medium and highcarbons steels. 70,000 PSI tensile strength. Ideal for out of position welding and tacking. Runs on AC or
DCEP (reverse) polarity. Specially formulated to operate with small 208/230 volt AC welders.
Applications
Typical applications include general fabrication, tack and skip welds, and for welding thin sections of
steel.
ALLOY
PART NUMBER
E6013
AWS A5.1
CWB TO CSA
W48 E4313
E7014
AWS A5.1
E7018
AWS A5.1
CWB TO CSA
W48 E4918-1-H8
E7018AC
AWS A5.1
DIAMETER
MM INCHES
LENGTH
MM INCHES
PW601320
PW601325
PW601332
PW601340
2.0
2.5
3.2
4.0
5/64
3/32
1/8
5/32
300
350
350
350
12
14
14
14
PW701425
PW701432
2.5
3.2
3/32
1/8
350
350
14
14
PW701825
PW701832
PW701840
2.5
3.2
4.0
3/32
1/8
5/32
350
350
350
14
14
14
PW7018AC25
PW7018AC32
2.5
3.2
3/32
1/8
350
350
14
14
PACKAGING: 2KG (4.4 lbs) Plastic Boxes - 20kg (44 lbs) per Master Case
FILLER METAL PRODUCTS
21
STAINLESS MIG WIRE
308L - PowerWeld 308L is used for TIG and MIG welding of unstabilized steels such as types 301, 302, 304, 305, 308. The average carbon content of
0.02% produces a weld deposit with good resistance against intergranular corrosion caused by carbide precipitation. This filler metal is the most popular
grade among stainless steels, used for general purpose applications.
309L - PowerWeld 309L is used for the welding of similar alloys in wrought or cast form. It is mostly used for welding dissimilar materials such as mild steel
to stainless steel, as well as for a barrier layer in stainless overlays. It has low carbon content of less than 0.03% reduces the possibility of intergranular
corrosion. For some applications, welding of straight chromium steels.
316L - PowerWeld 316L is used to weld wrought and cast forms of similar composition, as well as low carbon molybdenum-bearing austenitic alloys. The
lower ferrite level of this normal composition reduces the rate of corrosion in certain media and is suitable for use at cryogenic temperatures. The presence
of molybdenum increases its creep resistance at elevated temperatures.
All grades meet specification ASME SFA5.9 and are certified by CWB to AWS A5.9
Size
Amperage
Voltage
Suggested Welding Parameters for Stainless Steel Welding
.023"
.030"
.035"
.045"
35 - 70
50 - 100
160 - 210
180 - 250
21 - 26
24 - 28
26 - 29
28 - 32
308L
309L
MIG Welding: DCEP
Shielding Gas: 98% Argon + 2% Oxygen
Gas Flow: 30 to 50 CFH
Diameter
Spool Size
316L
.024" (0.6mm)
2# (0.9kg) spool
10# (4.5kg) spool
33# (15kg) spool
308L02402 309L02402 316L02402
308L02410 309L02410 316L02410
308L02433 309L02433 316L02433
.030" (0.8mm)
2# (0.9kg) spool
10# (4.5kg) spool
33# (15kg) spool
308L03002 309L03002 316L03002
308L03010 309L03010 316L03010
308L03033 309L03033 316L03033
.035" (0.9mm)
2# (0.9kg) spool
10# (4.5kg) spool
33# (15kg) spool
308L03502 309L03502 316L03502
308L03510 309L03510 316L03510
308L03533 309L03533 316L03533
.045" (1.2mm)
2# (0.9kg) spool
10# (4.5kg) spool
33# (15kg) spool
308L04502 309L04502 316L04502
308L04510 309L04510 316L04510
308L04533 309L04533 316L04533
CERTIFIED BY
STAINLESS TIG WIRE
Diameter
TIG Welding: DCEN
Shielding Gas: 100% Argon
Gas Flow: 30 to 40 CFH
CERTIFIED BY
Size
Amperage
Voltage
.035"
.045"
1/16"
3/32"
1/8"
60 - 90
80 - 110
90 - 130
120 - 175
150 - 220
12 - 15
13 - 16
14 - 18
15 - 20
15 - 20
308L
.035" (0.9mm) ER308L-035
309L
316L
ER309L-035 ER316L-035
.045" (1.2mm) ER308L-045
ER309L-045 ER316L-045
1/16" (1.6mm) ER308L-116
ER309L-116
3/32" (2.4mm) ER308L-332
ER309L-332 ER316L-332
1/8" (3.2mm)
ER309L-18
ER308L-18
ER316L-116
ER316L-18
Each TIG rod is stamped with grade for identification.
PACKAGING: 10 pound (4.5kg) tubes
STAINLESS ELECTRODES
PRODUCT DESCRIPTION
CERTIFIED BY
DIAMETER / SIZE
ITEM #
E308L-18
STAINLESS STEEL ELECTRODE
AWS A5.4 ASME SFA5.4 CLASS E308L-16 AC/DC
3/32 - 2.5mm X 300mm
1/8 - 3.2mm X 350mm
5/32 - 4.0mm X 350mm
PW308L25
PW308L32
PW308L40
E309L-18
STAINLESS STEEL ELECTRODE
AWS A5.4 ASME SFA5.4 CLASS E309L-16 AC/DC
3/32 -2.5mm X 300mm
1/8 - 3.2mm X 350mm
5/32- 4.0mm X 350mm
PW309L25
PW309L32
PW309L40
3/32 -2.5mm X 300mm
1/8 - 3.2mm X 350mm
5/32- 4.0mm X 350mm
PW316L25
PW316L32
PW316L40
E316L-18
STAINLESS STEEL ELECTRODE
AWS A5.4 ASME SFA5.4 CLASS E316L-16 AC/DC
PACKAGING: 2 kg (4.4 lbs) boxes, 20 kg (44 lbs) per carton
FILLER METAL PRODUCTS
22
AUTO DARKENING HELMETS
PROFESSIONAL SERIES
Viewing Area :
98mm x 55mm (3.86” x 2.17”)
MODEL
PWH98551
Auto-Darkening Filter Welding Helmet
Solar Powered - Fully Automatic Power on / off
Conforms to ANSI Z87.1-2003 and Colts CSA
Z94.3-07
Variable Shade Infinitely Adjustable 9 – 13
Switching Speed 0.000033 Seconds
Weld / Grind Mode Select Function
Adjustable Sensitivity
Adjustable Delay – Dark to Clear
IR/UV Protection – up to shade DIN 16 at all times
Magnifyer lens holder
Multi-Adjust Headgear for Welder Comfort
Light Weight – 480 g (16.9 oz) - 2 Year Warranty
STYLE
CARBON FIBRE
BLACK
MODEL
STYLE
PWH9855G3 KLOWN IN
CLAMSHELL PKG
MODEL
STYLE
PWH9855G4 SKULL CHAIN IN
MODEL
PWH98552
STYLE
CLAMSHELL PKG
CARBON FIBRE
BLUE
MODEL
STYLE
PWH9855G1 SKULL FLAME IN
CLAMSHELL PKG
MODEL
STYLE
PWH9855G5 RED EAGLE IN
MODEL
PWH98553
CLAMSHELL PKG
STYLE
CARBON FIBRE
RED
MODEL
STYLE
PWH9855G2 BLACK ART IN
MODEL
CLAMSHELL PKG
STYLE
PWH9855G6 CANADIAN IN
CLAMSHELL PKG
MODEL
PWH98554
DELUXE SERIES
STYLE
SILVER FLAME
Same features as Professional Models
MODEL
but with a smaller viewing area.
REPLACEMENT PARTS
PWHL1
OUTER LENS FOR ALL PWH HELMETS
PWHL2
INNER LENS FOR PWH9843 HELMETS
PWHL3
INNER LENS FOR PWH9855 HELMETS
PWH187
SLOTTED HARD HAT ADAPTER SET
PWHHG
REPLACEMENT HEADGEAR
MODEL
STYLE
PWH9843
BLACK
SAFETY PRODUCTS
Viewing Area :
98mm x 43mm
(3.86” x 1.69”)
23
ECONOMY WELDING HELMETS
ANSI Z87.1-1989 Approved
Excellent impact resistant polypropylene
Complete with headgear & lenses - individually boxed
MODEL
WH750
STYLE
FLIP FRONT
Model WH750 Flip Front
Style 2" X 4¼"
c/w adjustable head gear, clear
& shade 11 lenses.
MODEL
WH752
MODEL
WH754
STYLE
WIDE VISION FLIP FRONT
Model WH752 Flip Front Style
5½" X 4¼"
c/w adjustable head gear, clear
& shade 11 lenses.
STYLE
FIXED FRONT
Model WH754 Fixed Front
Style 5½" X 4¼"
c/w adjustable head gear, clear
& shade 11 lenses.
SWEATBANDS
MODEL
PW3100V
PW3200V
DESCRIPTION
Our innovative sweatband design has made wearing a
helmet more comfortable, no matter what time of year it
is. The pad has been field tested in a variety of industries
and is proven to reduce “helmet head”, to improve grip,
and to provide maximum perspiration absorption. Made
of 100% fleecy cotton and flame retardant, this product
features an air cushioned inner layer made of thousands
of small cells to hold excessive perspiration and a hook &
loop fasteners to fit all major brands of suspender (hard
hats) or non-suspender (welding and face shields) type
headgear.
2 per package
MODEL
WH622
STYLE
HAND SHIELD
Model WH622 Fixed Front Style
Hand Shield 2 " X 4¼"
c/w internal handle, clear & shade
11 lenses.
SAFETY PRODUCTS
24
WELDING & COVER GOGGLES
PowerWeld goggles feature soft comfortable sides, adjustable headband straps and air vents to
reduce fogging. Provide protection from impact and IR/UV in flame cutting and brazing applications.
All models meet or exceed ANSI Z87.1 standards.
WELDING GOGGLES
FLIP FRONT GOGGLE 50 MM
MODEL
CUP GOGGLE 50 MM
MODEL
R600
LENSES
R850
SHADE #5 (50 MM)
LENSES
SHADE #5 (50 MM)
COVER GOGGLE 2 X 4¼”
MODEL
R950
LENSES
SHADE #5 ( 2 X 4¼”)
FLIP FRONT GOGGLE 2 X 4¼”
MODEL
LENSES
R900
SHADE #5 ( 2 X 4¼)
COVER GOGGLE SHADE 5
MODEL
LENSES
R1165
SHADE #5
COVER GOGGLE 50 MM
COVER GOGGLES
MODEL
R800
R1140
LENSES
POLYCARBONATE
SHADE #5 (50 MM)
RGS STRAPS
GRINDING GOGGLE CLEAR
MODEL
LENSES
MODEL
RGS
SAFETY PRODUCTS
DESCRIPTION
REPLACEMENT STRAPS
FOR ALL GOGGLES C/W CLIPS
25
FILTER & COVER PLATES
FILTER PLATES
•Provides ultimate protection from
•Precision ground and edged to allow a
proper and safe fit
•
•Hardened glass
•ANSI Z87.1
Optically correct and precisely shaded
FILTERS
ultraviolet and infrared rays during the
welding process
PART NO
SIZE
MP2H
2 X 4¼
MP4H
4½ X 5¼
ML5H
50 mm
DESCRIPTION
HARDENED GLASS
(50 PER BOX),
HARDENED GLASS
(25 PER BOX),
HARDENED GLASS
(50 PER BOX),
FILTER SHADES 4-14
EACH
FILTER SHADES 4-14
EACH
FILTER SHADES 4-6
PAIR
POLYCARBONATE
COVER LENS
PART NO
SIZE
DESCRIPTION
PP1
2X4¼
SAFETY PLATE .060 - 100% POLYCARBONATE
ANSI STAMPED - LENS IMPRINTED
PP2
2X4¼
COVER PLATE .060 - 100% POLYCARBONATE
PP4
4½X5¼
COVER PLATE .060 - 100% POLYCARBONATE
PL5
50 MM
COVER PLATE .060 - 100% POLYCARBONATE
CR-39
2 X 4 ¼" & 50 MM 100 / BOX 500 / CASE 4 ½ X 5 ¼” 25 / BOX 500 / CASE
PART NO
SIZE
PP2CR
2X4¼
PP4CR
4½X5¼
DESCRIPTION
COVER PLATE .060 CR-39
COVER PLATE .060 CR-39
2 X 4 ¼” 100 / BOX 500 / CASE 4 ½ X 5 ¼" 50 / BOX 200 / CASE
GLASS
PART NO
SIZE
GP2
2 X 4¼
GP4
4½ X 5¼
GL5
2 X 4¼
DESCRIPTION
GLASS COVER PLATE, BULK PACKED
(100 PER BOX)
GLASS COVER PLATE, BULK PACKED
(100 PER BOX), EACH
GLASS COVER PLATE, BULK PACKED
(100 PER BOX), PAIR
2 X 4 ¼" & 50 MM 100 / BOX 500 / CASE 4 ½ X 5 ¼" 50 / BOX 400 / CASE
SAFETY PRODUCTS
26
MAGNIFIERS & AUTO CARTRIDGES
MAGNIFIER - POLYCARBONATE
PART NO.
MAG-75
DESCRIPTION
MAGNIFIER LENS
SELECTOR CHART
Magnifier Plate Focol Power 0.75
MAG-100 Magnifier Plate Focol Power 1.00
AGE
MAG-125 Magnifier Plate Focol Power 1.25
Up to 41
41 - 44
44 - 47
47 - 50
50 - 52
52 - 56
56 - 60
60 - over
MAG-150 Magnifier Plate Focol Power 1.50
MAG-175 Magnifier Plate Focol Power 1.75
MAG-200 Magnifier Plate Focol Power 2.00
MAG-225 Magnifier Plate Focol Power 2.25
MAG-250 Magnifier Plate Focol Power 2.50
FOCOL POWER
Focol Power 0.75
Focol Power 1.00
Focol Power 1.25
Focol Power 1.50
Focol Power 1.75
Focol Power 2.00
Focol Power 2.25
Focol Power 2.50
MAGNIFIER - GLASS
PART NO.
DESCRIPTION
M75
Magnifier Glass Plate 0.75 Focol Power- 2X4 ¼
M100
Magnifier Glass Plate 1.00 Focol Power- 2X4 ¼
M125
Magnifier Glass Plate 1.25 Focol Power- 2X4 ¼
M150
Magnifier Glass Plate 1.50 Focol Power- 2X4 ¼
M175
Magnifier Glass Plate 1.75 Focol Power- 2X4 ¼
M200
Magnifier Glass Plate 2.00 Focol Power- 2X4 ¼
M225
Magnifier Glass Plate 2.25 Focol Power- 2X4 ¼
M250
Magnifier Glass Plate 2.50 Focol Power- 2X4 ¼
M300
Magnifier Glass Plate 3.00 Focol Power- 2X4 ¼
M350
Magnifier Glass Plate 3.50 Focol Power- 2X4 ¼
AUTO DARKENING CARTRIDGES
Solar powered cartridges fit most standard 2” X 4 ¼”
helmets or 4 ½”X 5 ¼” helmets
2 arc sensors for reliable performance
Dark state shade #11
Light state shade #3
Lens thickness 1/5" (5.0mm)
Switching speed 0.5ms
MODEL
XG-HP11
STYLE
MODEL
2" X 4 1/4"
XG-511
SAFETY PRODUCTS
STYLE
4 1/2" X 5 1/4"
27
REPLACEMENT VISORS
All visors meet ANSI Z87.1 specifications
Each visor is individually packaged - 20 per case
UNIVERSAL STYLE
PART #
DESCRIPTION
SIZE
804UCL
804BCL
Clear Unbound
Clear W/alum Band
8” x 12”
8” x 12”
814ULG
814BLG
Light Green Unbound
Light Green W/alum Band
8” x 12”
8” x 12”
824UDG Dark Green Unbound
824BDG Dark Green W/alum Band
8” x 12”
8” x 12”
844UCL
844BCL
Clear Unbound
Clear W/alum Band
9” x 15.5”
9” x 15.5”
854ULG
854BLG
Light Green Unbound
Light Green W/alum Band
9” x 15.5”
9” x 15.5”
864UDG Dark Green Unbound
864BDG Dark Green W/alum Band
9” x 15.5”
9’ x 15.5”
FIBRE METAL® STYLE
PART #
DESCRIPTION
SIZE
4118C
Clear Visor
4118DG
Green Visor
8” x 11”
8” x 11”
4178C
Clear Visor
8” x 16.5”
4178G
Green Visor
8” x 16.5”
4199C
Clear Visor
9-3/4” x 19”
4199G
Green Visor
9-3/4” x 19”
4199-05
Green Visor Shade #5
9-3/4” x 19”
FACESHIELD HEADGEAR
Headgear with ratchet adjustment
MODEL
H700
STYLE
HEADGEAR
GOLD FILTER PLATES
GOLDEN VIEW® GOLD-COATED
POLYCARBONATE FILTER PLATES
PART NO.
DESCRIPTION
MP2GO
2 x 4 ¼“ Plates Shades 9 to 12 Gold Coated, 50 / box
MP4GO
4 ½ X 5 ¼“ Plates Shades 9 to 12 Gold Coated, 25 / box
SAFETY PRODUCTS
28
WELDING & WORK GLOVES
WELDING GLOVE
Features
·Durable blue shoulder split cowhide.
·14” length.
·Insulated with cotton/foam
lining for added heat protection.
·Reinforced thumb.
·Welted fingers protect stitching.
·Lock stitched with Kevlar® thread for
added strength.
Features
·Pearl shoulder split cowhide.
·14” length.
·Cotton lined for comfort.
·Welted fingers protect cotton
stitching.
·Lock stitched with cotton
thread.
MODEL
STYLE
PW1001
WELDING
WELDING GLOVE
Features
·Durable premium bourbon brown/pearl
side split cowhide.
·14” length.
·Insulated with cotton/foam lining.
·Double reinforced thumb.
·Welted fingers protect stitching.
·Lock stitched with Kevlar® thread for
added strength.
MODEL
PW1003
STYLE
STYLE
STYLE
WORK GLOVE
Features
·Top grain pigskin leather.
·Great in wet and oily conditions.
·Clute cut seams on top of glove
for seamless palm area.
·4” cuff for added protection.
·Thumb strap reinforcement.
·Straight thumb.
·Lock stitched with Kevlar® thread for
added strength.
STYLE
MEDIUM
LARGE
MIG / TIG GLOVE
Features
·Lightweight pearl deerskin split leather
enhances dexterity.
·Unlined for maximum feel.
·4” cuff.
·Straight thumb for best gun grip.
·Lock stitched with Kevlar® thread for
added strength.
PW2003M
PW2003L
STYLE
MEDIUM
LARGE
WORK GLOVE
Features
·Economy shoulder split cowhide.
·Patch palm and knuckle strap.
·Canvas back.
·Gunn cut with 2 ½” starched safety
cuff.
·Lock stitched for added strength.
MODEL
MIG / TIG GLOVE
MODEL
MEDIUM
LARGE
WORK GLOVE
PW3001
STYLE
WELDING
PW2001M
PW2001L
Features
·Top grain pearl goatskin leather
enhances feel and durability.
·4” cuff.
·Wing thumb.
·Lock stitched with Kevlar® thread
for added strength.
MODEL
MODEL
PW1002
MODEL
WELDING
MIG / TIG GLOVE
PW2002M
PW2002L
WELDING GLOVE
Features
·Industrial grade, shoulder split.
·Cowhide palm and knuckle strap.
·Canvas back.
·Gunn cut with 2 ½”
rubberized safety cuff.
·Lock stitched for added strength.
MODEL
PW3002
STYLE
WORK GLOVE
SAFETY PRODUCTS
29
MECHANICS GLOVES
PowerWeld chooses the highest quality of premium top grain cowhide goatskin, pigskin
and deerskin for our mechanics gloves. PowerWeld gloves are stitched with Kevlar®
thread for added strength.
GOATSKIN
PIGSKIN
MODEL
PW2660M
PW2660L
PW2660XL
STYLE
MODEL
MEDIUM
LARGE
X-LARGE
PW2670M
PW2670L
PW2670XL
COWHIDE
STYLE
MODEL
MEDIUM
LARGE
X-LARGE
PW2680L
PW2680XL
DEERSKIN
MODEL
STYLE
STYLE
PW2690L
PW2690XL
LARGE
X- LARGE
LARGE
X- LARGE
WELDING BLANKETS
LIGHT DUTY
MEDIUM DUTY
WELDING
BLANKET
WELDING
BLANKET
FM
APPROVED
PowerWeld welding blankets offer protection for objects and
equipment from sparks, spatter and slag created from welding,
grinding and flame cutting processes. The use of mulitple layers
is recommended for maximum protection.
MODEL
COUVERTURE DE SOUDAGE
À USAGE MOYENNE
PW2680L
PW2680XL
LARGE
X- LARGE
Les couvertures PowerWeld vous offrent la protection aux objects et
equipements contre les étincelles, éclaboussures et laitiers, créer des procéder
de soudage, meulage et oxy-coupage. L’utilisation d’épaisseurs multiples est
recommander pour une protection maximale.
Ÿ24oz acrylic coated Fiberglass
PW2680L
PW2680XL
STYLE
LARGE
X- LARGE
Les couvertures PowerWeld vous offrent la protection aux objects et
equipements contre les étincelles, éclaboussures et laitiers, créer des procéder
de soudage, meulage et oxy-coupage. L’utilisation d’épaisseurs multiples est
recommander pour une protection maximale.
Features:
Ÿ24oz acrylic coated Fiberglass
ŸAcrylique de 24 on. enduit de fibre de
ŸGrommets on 18" (45mm) centers on all
sides
MODEL
COUVERTURE DE SOUDAGE
À USAGE MOYENNE
APPROVED
ŸCaractéristiques
Features:
PowerWeld welding blankets offer protection for objects and
equipment from sparks, spatter and slag created from welding,
grinding and flame cutting processes. The use of mulitple layers
is recommended for maximum protection.
FM
STYLE
FM
APPROVED
verre.
ŸGrommets on 18" (45mm) centers on all
ŸOeillets au 18" (45mm) centre detous les
sides
ŸCaractéristiques
ŸAcrylique de 24 on. enduit de fibre de
verre.
ŸOeillets au 18" (45mm) centre detous les
bords.
bords.
Ÿ1000ºF (550ºC) Service Temperature
ŸTempérature d’utilisation 1000º (550º)
Ÿ1000ºF (550ºC) Service Temperature
ŸTempérature d’utilisation 1000º (550º)
ŸKevlar® Stitched Hems
ŸRebords cousus au Kevlar®
ŸKevlar® Stitched Hems
ŸRebords cousus au Kevlar®
Warning: Blankets should be checked regularly for integrity.
Replace damaged or worn blankets as needed. PowerWeld
blankets are warranted against defects in the manufacturing
process only. Since applications vary widely no warranty on
the blanket’s usage is implied or intended. All Blankets are
subject to burn through. The user is responsible for
PART # PW24B66
Avertissement: Les couvertures devront êtres vérifier
régulièrement pour leurs intégritées. Remplacler les
couvertures endommager ou usées. Les couvertures
PowerWeld sont garanties contre les défauts de
fabrications seulement. Vue que les applications varient
7
75709 24066
7
Made in China
Fabriquer en Chine
MEDIUM DUTY
MODEL
PW24B66
PW24B68
PW24B810
PW24B1010
PW24B6050
SIZE
6' X 6'
6' X 8'
8' X 10'
10' X 10'
60"w X 50 Yard Roll
Features:
Ÿ24oz acrylic coated gold fiberglass
ŸGrommets on 18" (45mm) centers on all sides
Ÿ1000ºF (550ºC) service temperature
ŸKevlar® stitched hems
PowerWeld welding blankets
offer protection for objects and
equipment from sparks, spatter
and slag created from welding,
grinding and flame cutting
processes. The use of mulitple
layers is recommended for
maximum protection.
Warning: Blankets should be checked regularly for integrity.
Replace damaged or worn blankets as needed. PowerWeld
blankets are warranted against defects in the manufacturing
process only. Since applications vary widely no warranty on
the blanket’s usage is implied or intended. All Blankets are
subject to burn through. The user is responsible for
Avertissement: Les couvertures devront êtres vérifier
régulièrement pour leurs intégritées. Remplacler les
couvertures endommager ou usées. Les couvertures
PowerWeld sont garanties contre les défauts de
fabrications seulement. Vue que les applications varient
PART # PW24B66
7
75709 24066
7
Made in China
Fabriquer en Chine
LIGHT DUTY
MODEL
PW18B66UC
PW18B68UC
PW18B810UC
PW18B4050UC
PW18B6050UC
SIZE
6' X 6'
6' X 8'
8' X 10'
40"w X 50 Yard Roll
60"w X 50 Yard Roll
Features:
Ÿ18 oz heat treated tan fiberglass - uncoated
ŸGrommets on 18" (45mm) centers on all sides
Ÿ1000ºF (550ºC) service temperature
ŸKevlar® stitched hems
SAFETY PRODUCTS
30
LEATHER CLOTHING
PowerWeld leather clothing is made from split cowhide for maximum durability and heavy duty protection. Designed to
allow complete body movement and freedom while welding. All seams are sewn with Kevlar® thread which is double
locked stitched to minimize seam burnout.
PowerWeld leather welding jackets incorporate many additional features
including:
PART NO.
Heat and electrical insulated snaps.
Inside pockets for extra use.
Roll up collar with hook & loop closure.
Welted shoulder seams.
FR sateen lined collar/upper sleeves/shoulder
provides comfortable skin contact and absorbs sweat.
Reinforced double leather front snap panel.
All stress points are rivetted.
Adjustable snap cuffs.
WELDER’S APRON
ROD BAG
DESCRIPTION
PW3280S
Welders Jacket 30" Small
PW3280M
Welders Jacket 30" Medium
PW3280L
Welders Jacket 30" Large
PW3280XL
Welders Jacket 30" X-Large
PW3280XXL
Welders Jacket 30" XX-Large
PW3280XXXL
Welders Jacket 30" XXX-Large
PW3280XXXXL
Welders Jacket 30" XXXX-Large
PW4236
Bib Apron 24" X 36"
PW4242
Bib Apron 24" X 42"
PW3221M
Cape Sleeves Medium
PW3221L
Cape Sleeves Large
PW3221XL
Cape Sleeves X-Large
PW3221XXL
Cape Sleeves XX-Large
PW3221XXXL
Cape Sleeves XXX-Large
PW3120
Bib Apron for Cape Sleeves 20"
PW5200-23
Sleeves 23" Length (pair)
PW525
Leather Rod Pouch
WELDER’S JACKET
WELDER’S CAPE SLEEVES
SAFETY PRODUCTS
31
CHEMICALS
ANTI-SPATTER
DYE PENETRANTS
Anti-Spatter Nozzle Shield
For Mig gun nozzle and welding surfaces
quick dry formula, to save time and reduce cost.
Reduces spatter build-up on MIG nozzles.
Prevents spatter adhesion on surface.
Reduces clean up time.
Heat-resistant to withstand high temperature use.
Non-flammable.
Paint compatible.
Contains no silicones.
Contains no fluorocarbons.
Uses CO2 propellent.
Private label program available.
Available in 16 and 24 oz. aerosols.
MODEL
1620-16
SIZE
MODEL
PW1500
PW2500
PW3000
473 ml/16oz
NOZZLE DIP
Aerosol Cleaner
Aerosol Developer
Aerosol Penetrant
SIZE
16 oz
16 oz
16 oz
Powerweld Dye Penetrant Inspection chemicals provide a
simple and cost effective method for the detection of surface
flaws, cracks and defects. This three step process is
applicable for use on materials of steel, stainless steel,
aluminum, copper, cast iron and brass. Defects are clearly
visible as shown by a red dye without the requirement of
additional equipment. Meets military, nuclear, ASME and
ASTM specifications.
Nozzle Dip
Economical formula to protect both
manual and automatic MIG gun
nozzles and MIG gun tips.
Safe.
Non-toxic.
Contains no silicones.
Non-flammable.
Odorless.
Contains no hydrocarbon solvents.
16 oz. unbreakable container.
Private label program available.
DESCRIPTION
MODEL
108-16
SIZE
454 grams/16oz
COOLANT
Coolant For Plasma, MIG & TIG Machines
An ethylene glycol based formulation for use in radiator circulator
and re-circulator systems. Used for cooling Plasma, MIG, TIG and
resistance welding systems, as well as general industrial cooling
applications. Temperature range: 19ºF, 6ºF and -60ºF
MODEL
RANGE
COOL1
COOL2
COOL3
COOL1-55
19ºF / -7ºC
6ºF / -14ºC
-60ºF / -52ºC
19ºF / -7ºC
SIZE
LUBE PADS
Wire Lube Pads
Keeps MIG, sub-arc, and flux core cable conduits producing
for up to 3 months without down time for cleaning.
Eliminates erratic wire feed caused by dust, particles, and
flashing being trapped inside conduit lines.
Increase wire surface feedability.
Wire lube pad lowers the coefficient of friction in conduits
approximately 60% and increases life of wire feed units.
Pretreatment of wire lube pads so they will not dry out or
evaporate.
Contains no solvents, abrasives, carbon, sulfur, nitrogen,
moly disulfide or silicones.
Non-toxic, non-flammable.
Economical and easy to use.
Available in recloseable plastic boxes, 4, 6 or 8 pads to a box
with one clip and Econo-Pak of 25 pads with clip.
Wire lube pads can be certified for nuclear welding.
Flexibility to use pad on both sides and on any axis.
Private label program available.
1 GAL/3.78L
1 GAL/3.78L
1 GAL/3.78L
55 GAL/205L
PACKAGED 4 GALLONS / CASE
CHEMICAL PRODUCTS
MODEL
# OF PADS
LUBE4
LUBE6
LUBE8
LUBE25
4
6
8
25
32
CYLINDER & MIG CARTS
EASY TO SHIP
EASY TO STOCK
EASY TO ASSEMBLE
CYLINDER CARTS
CYT-6SH
6" rubber wheels
41" H x 22" W
Holds 40 cu. ft. (B)
acetylene and 40 -80
cu. ft. oxygen
Side by side
MODEL
CYT-8CH
8" rubber wheels
41" H x 26" W
Holds 75-145 cu. ft.
acetylene and 120-244
cu. ft. oxygen
Side by side
CYLINDERS
CYT-6SH
Boxed cylinder carts make sense.
Easy to ship and easy to stock.
MODEL
CYLINDERS
CYT-8CH
MEDIUM
SMALL
CYT-8CH-1
8" rubber wheels
41" H x 26" W
Holds 75-145 cu. ft.
acetylene and 120-244
cu. ft. oxygen
Tandem - front to back
CYT-14CH
14" rubber wheels
44.5" H x 31.5" W
Holds 145-250 cu. ft.
acetylene and 244-330 cu. ft.
oxygen
MODEL
CYLINDERS
CYT-14CH
LARGE
MODEL
CYLINDERS
CYT-8CH-1 MEDIUM
CYT-81CH-1
8" rubber wheels
44" H x 12" W
Holds 80-330 cu. ft.
high pressure cylinder
MODEL
CYLINDERS
CYT-81CH-1 SINGLE
MIG WELDER CARTS
EASY TO SHIP
EASY TO STOCK
EASY TO ASSEMBLE
Boxed MIG carts make sense. Easy
to ship and easy to stock.
CCMIG Industrial MIG Cart Dimensions:
MODEL
Heavy Duty Steel Construction
Top Shelf: 17 3/4" L x 11 1/4" W
Middle Shelf: 15 1/4" L x 11 1/4" W
Bottom Shelf: 17 3/8" L x 11 1/4" W
Cylinder Shelf: 10 1/2" L x 11 1/4" W
Cylinder shelf holds from small to larger industrial
cylinders
Rear Wheels: 6" x 1 1/4"
Front Swivel Wheels: 2 1/4" x 7/8"
STYLE
CCMIG-DELUXE DELUXE
Deluxe Welder Cart for MIG or Plasma
150 lb capacity
Two drawers to hold parts and accessories
Cable hangers, cylinder rack with chains
Elevated handle for ease of movement
Holds your small MIG welder, gas cylinder plus
plenty of room for tools and accessories.
Front handle for easy movement
MIG gun and ground lead holders on sides
Cylinder holding chains
Height: 24 3/4"
Easy to assemble.
MISCELLANEOUS
MODEL
STYLE
CCMIG
CCMIG-B
BLUE
BLACK
33
FILLET WELD GAUGES
PowerWeld fillet weld gauges are precision inspection tools designed to ensure
quality and accuracy. Several models to choose from cover many applications.
Features include:
•Precision gauge
•Constructed of rust proof 22 gauge type 304 steel.
•Die blanked to eliminate sharp edges - adds to accuracy.
•Permanently etched lettering for long life and abrasion resistance.
MODEL
MG-8
STYLE
•Angle of preparation, 0º to 60º.
•Excess weld metal (capping size).
•Depth of undercut.
•Depth of pitting.
•Fillet weld throat size.
•Fillet weld length.
•Misalignment (high-low).
BRIDGE CAM
MODEL
STYLE
MG-11
FILLET
•Slim design.
•Changes from standard to metric - simply remove gauge body, turn scales
PowerWeld®
Part # MI-MG-8
Cam Type Gauge
Part # MI-MG-11
Fillet Weld Gauge
MODEL
WG-06HILO
•The fillet weld gauge allows fast, accurate measurement of eleven (11) fillet
weld sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" 5/8", 3/4", 7/8", and 1",
and their metric equivalents, to determine weld sizes, either concave or
convex.
•Each gauge blade is made of 1-1/4 "x 4" stainless steel to resist rust and
bending.
•Blades are deburred to remove rough edges.
•All sizes and numerals are engraved into the surface for easier reading.
STYLE
HI LO
over and replace body.
•Measurements read in standard on one side & metric on opposite side.
•Measures internal alignment of pipe after fit-up/alignment, and cuts
radiographic rejects.
•Measures internal misalignment of pipe before and after tacking.
•Measures bevel on end preparation.
•This handy devise even measures scribe lines, socket welds, crown height
of welds & fillet weld size.
•Accurate readings instantly.
•Easy to read digital display.
•Zero setting at any position.
•Metric / Imperial system conversion
MODEL
DSG-01
STYLE
DIGITAL
any position.
•The digital welding gauge is equipped
with an output port.
•Data can be input into a computer or
a printer via special connecting cable.
MODEL
STYLE
WG-07SFG SKEW-T
Resolution: 0.01mm/0.0005”
Range: 0-12.7mm
Error: +/- 0.03mm +/- 0.001”
Operating Power: One silver oxide battery
SR44, 1.55V (Included)
Working Temperature: 0ºC to +40ºC
Humidity: <80%
Storage Temperature: -10ºC to +60ºC
•For checking angle of vertical member.
•For checking weld acute side.
•For checking weld obtuse side.
MISCELLANEOUS
34
MISCELLANEOUS
F CLAMPS
C CLAMPS
MODEL SIZE
THROAT DEPTH
MODEL
SIZE (”)
SIZE (mm)
402
2"
2.25"
F-1200-8
8"
200mm
404
4"
3.25"
F-1200-10
10"
250mm
406
6"
4.00"
F-1200-12
12"
300mm
408
8"
5.00"
F-1200-16
16"
400mm
410
10"
6.00"
F-1200-20
20"
500mm
412
12"
6.50"
F-1200-24
24"
600mm
Features: Rugged, heavy duty drop forged steel frame. Steel spindles are
tough-hardened. New design frame for maximum strength. Lacquered
finish. Steel swivel pads adjust freely to bear evenly on clamped part.
Precision cut, single lead Acme thread for smooth operation. Steel
spindles are copper plated for spatter protection. Never needs greasing;
dry lubricated for smooth operation. Extra throat depth.
Features: 1200kg (2600lb) capacity. Tempered steel sliding arm.
Drop forged, electro-galvanized. Rail, fixed jaws and pressure
plate heat-formed in one piece from cold drawn profiled steel,
optimized for high static stress loadings. Heat treated, high carbon
Acme threaded screw is tempered and quenched to give you
greater loading capacity and longer service life. Spatter resistant.
Throat depth 5½” (140mm)
RETRACTABLE HOSE REELS
THERMOMETERS
Hose reel capacity 100'
(30m) twin hosewelding hose extra
MODEL
MHR100
Measuring Range: -30ºC to 260ºC
Measuring Range: -22ºF to 500ºF
Built in laser pointer
Field of View: 8:1
Fast sampling time: less than 1 second
Automatic selection range and resolution
Backlit display
ºC/ºF switchable
Auto data-hold
Auto power off 8 seconds
Complete with 9V battery and carry
pouch
One year warranty
Dimensions: 131mm x 96mm x 35mm
Weight: 130g
STYLE
MANUAL / TWIN
Hose reel comes complete
with 50' (15m) & 100' (30M)
Grade T 1/4" twin hose
Hose reel
comes complete
with 50' (15m) single
3/8" air hose
MODEL
STYLE
AHR3850
RETRACTABLE- AIR
MODEL
STYLE
RHR50
RHR100
RETRACTABLE - 50'
RETRACTABLE - 100'
MODEL
DT-810
STYLE
COMPACT
Wide measuring range -50ºC to 500ºC
-58ºF to 932ºF
Built in laser pointer
Super large 3 ½ Digit (1999 counts)
multifunction LCD
Backlit display
ºC/ºF switchable
Overload indication and beeper
Fast sampling time
Auto data-hold and power off
Fixed emissivity (0.95) covers 90% of surface
applications.
Narrow 8:1 field of view
Automatic selection range and resolution
MODEL
Complete with 9V battery & carry pouch
One year warranty
DT-8812
Dimensions: 159x79x57.2mm
Weight: 190g
MISCELLANEOUS
STYLE
DELUXE
35
MISCELLANEOUS
WEED BURNER
MODEL
PW-500PT
HELMET BAG
PowerWeld heavy duty
helmet & gear bag
STYLE
PROPANE
Store helmet, gloves, and
other tools in a safe place.
Torch operates on a standard propane tank-no regulator
needed. Burn weeds, repair asphalt, peels paint, melts
ice and thaws pipe.
Comes with 10' neoprene hose, flow control P.O.L. fitting
on/off valve, striker - 500,000 BTU rating.
HOSE CLAMP PINCERS
Drawstring closure &
shoulder carrying strap.
MODEL
STYLE
PWHB
BAG
SOAPSTONE CRAYONS
Portable and lightweight, used for pinching and
removing ear clamps.
MODEL
STYLE
PW1098
CRIMP PLIERS
MODEL
STYLE
FS1
RS1
FLAT
ROUND
White select soapstone
144 pieces per box
12 boxes per case
WELDER’S KIT
HOSE REPAIR KIT
Welding Helmet & Gear Bag
filled with:
Auto Darkening Helmet
Variable Shade 9 - 13
Welders Gloves
Chipping Hammer
Positioning Magnet
Welding Cup Goggles
Standard Tip Cleaner
Special B-size kit for 3/16" & 1/4" ID
hoses. Offers 12 different items most
commonly used for hose repair.
Comes complete with PW1098
pincers, and circle clamps.
MODEL
PW-82
Single Flint Lighter
Clear Safety Spectacles
Wire Scratch Brush
Soapstone and Holder
STYLE
MODEL
STYLE
KIT
WEKIT
KIT
MISCELLANEOUS
MIG Welders Pliers
36
MISCELLANEOUS
NOZZLE REAMER
CABLE HITCH
MODEL
Cable Hitch allows you
to support heavy long
lengths of welding
cable by hanging it on
its handy hook
assembly. Comes with
a non-slip locking
assembly.
STYLE
CH-240
CABLE HITCH
MODEL
STYLE
REAMER
MANUAL
ŸCleans hot MIG nozzles on the torch
ŸSelf adjusting to fit all sizes
ŸExpanding spring steel cleaning blades
BATTERY CLAMPS
MODEL
STYLE
BCR-600
BCB-600
RED
BLACK
Heavy duty 600 amp battery clamps with red handles
for positive and black handles for negative
TUNGSTEN HOLDER
CIRCLE BURNER
Comes with tip holders
to fit most popular
cutting torch models.
MODEL
I-69-6
Chuck keeps positive on tungsten
while sharpening
STYLE
MODEL
CSH
UNIVERSAL
STYLE
ACCESSORIES
CYLINDER WRENCHES
MODEL
5
MODEL
STYLE
1013
B & MC
STYLE
10 WAY
10-Way Cylinder Wrench
ŸFor regulators, torches and cylinders
ŸDrop-forged
ŸSpecial alloy steel
B & MC Tank Key
Double Ended
TIG TORCH HOLDER
TIG torch holder with
magnetic base
MODEL
MI-TTS-M
MODEL
20T
STYLE
STYLE
250T
POL
Propane Key
POL Acetylene
Cylinder Key
MIG TORCH HOLDER
MIG torch holder with
magnetic base
STYLE
TIG
MODEL
PROPANE
MODEL
STYLE
MI-MTS-M
MIG
MISCELLANEOUS
37
MISCELLANEOUS
MAGNETS
Positioning magnet
Small 25# capacity
Positioning magnet
Medium 50# capacity
MODEL
SIZE
MODEL
M061
SMALL
M062
SIZE
MEDIUM
Positioning magnet
Large 75# capacity
MODEL
SIZE
M063
LARGE
ŸMulti-purpose holders for
assembly and positioning
ŸAdheres to most metal objects
ŸIdeal for welding, soldering,
assembly and pipe installation
HEAVY DUTY EXTENSION CORDS
Super flex extension cord - Super flexible, type
SJTW outdoor cord. Lightweight-stays flexible to -67ºF.
3 conductor grounded cord 15 Amps, 125V. Resistant
to abrasions, oil, grease & chemicals. UL & ULC listed.
Features power indicator in female receptacle to show
that the power is on. Available in 25ft, 50 ft and 100 ft
lengths. Three high-visibility colours to choose from.
MODEL
EC25-YE
EC50-YE
EC100-YE
NEMA 6-50 plug & receptacle
25’ & 50’ water resistant assembly
8/3 Type STW 40A-250V
Safety lighted ends
YELLOW JACKET 25' (8/CASE)
YELLOW JACKET 50' (6/CASE)
YELLOW JACKET 100' (4/CASE)
TYPE
EC25-BL
EC50-BL
EC100-BL
BLUE JACKET 25 (8/CASE)
BLUE JACKET 50' (6/CASE)
BLUE JACKET 100' (4/CASE)
MODEL
Welder Power Cable Extension
TYPE
MODEL
EC25-OR
EC50-OR
EC100-OR
8/3 TYPE STW 250V
TYPE
ORANGE JACKET 25' (8/CASE)
ORANGE JACKET 50' (6/CASE)
ORANGE JACKET 100' (4/CASE)
MODEL
PCE-25
PCE-50
TYPE
SAFETY LIGHTED 25' (4/CASE)
SAFETY LIGHTED 50' (2/CASE)
MISCELLANEOUS
38
MISCELLANEOUS
SPOOL ADAPTER
WELDER’S PLIERS
Universal 4” - 1 & 2 lb
Spool Adaptor
The universal welding wire spool
adaptor quickly adapts most wire
feeders and integrated MIG
machines to use 4” (1 & 2 lb)
spools without removing or altering
the spindle assembly.
MODEL
TYPE
SA-1
Welders Multi-Use Tool
ŸEight-way pliers
ŸNickel plated finish
ŸIdeally suited for removal of hot
spatter from nozzle ends
MODEL
STYLE
YS-50
MIG PLIERS
YS-H PLIERS HOLSTER
Pliers Holster
UNIVERSAL
WELDING TABLE
LIGHTER
Welding workbench can be used anywhere - home, shop or in
the field
Folds up easily for storage or transportation
Large work area of galvanized welded mesh 24" X 40" (61cm
X 101cm)
Work height of 36" (914cm)
Heavy duty construction - 600lb (272kg) weight capacity
MODEL
CAPACITY
WB2440
272KG / 600 lbs
Welder’s Bench Applications
Welding, pipe work, painters, machine shops, auto service
shipping & receiving, assembly work, cut off & mitre saws.
CABLE LUG CRIMPER
Lightnin
Bug Striker
MODEL
STYLE
PW08-100
PIEZO STRIKER
CABLE SPLICERS
Mechanical cable splicers incorporate
hex-screws for solid connection and
an insulated cover for safety
ŸEasy to use crimping tool
ŸTakes any size of solder
type lug
ŸSimply use a hammer to
do the job
ŸGood permanent
connection
ŸSpring return
MODEL
CABLE SIZE
CS-610
CS-2040
#2-1/0
2/0-4/0
TIG FINGER FEEDER
MODEL
RL-CRIMP
STYLE
UNIVERSAL
TIG CABLE COVER
Nylon covers with zippered closure
3" and 4" widths
3m (10') Cable Cover
6.7m (22') Cable Cover
MODEL
WC-3-10
WC-4-10
STYLE
3" X 10' (3m)
4" X 10' (3m)
MODEL
STYLE
WC-3-22
WC-4-22
3" X 22' (6.7m)
4" X 22' (6.7m)
Feeds TIG filler rod comfortably. Hold the feeder
like a pen or pencil. Insert the TIG filler wire from
the rear of the unit – not from the front. With the
feeder comfortable in your hand, advance the
wire by rolling the rubber wheel with the tip of
your index finger. Suitable for TIG wire diameters
0.8mm (.030”) to 3.2mm (1/8”).
MISCELLANEOUS
MODEL
STYLE
PW1550
TIG FINGER FEEDER
39
PROFESSIONALS PREFER POWERWELD
QUALITY
WELDING,
SAFETY AND
INDUSTRIAL
SUPPLIES
PowerWeld products are available from:
CATALOG # 214