Download Siemens Mobile Phone User guide

c45_ba_neu_engl
13.09.2001
13:19 Uhr
Seite 1
s
We recommend using only Siemens Original Accessories to avoid
possible damages.
All functions of the phone are described in the enclosed detailed user
guide. In particular please observe the safety precautions which you
will find at the beginning of the guide.
Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2001
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.my-siemens.com
Ref.No.: A31008-H5100-A1-2-7619
*A5B00075001690*
User Guide
C45
Thank you for buying a Siemens mobile phone. We wish you a lot of enjoyment and pleasure with it.
If you read through the user guide carefully, you will get to know all the functions of the phone. In particular, please observe the safety precautions (p. 3)
and PIN/security (p. 9).
The front and back covers of the casing (CLIPit™ Covers) can be changed in a
matter of seconds - no tools required:
Your phone’s display is delivered with a protective film. Remove this film before getting started. In rare cases the static charge created by removing this
film may cause discoloration at the edges of the display. However, this will
disappear within 10 minutes.
!"#
User Guide............................... 5
Menu control ........................... 5
Insert SIM card/battery .......... 6
Charge battery ......................... 7
!"
#
$
%& '
Dialling with number keys ...... 10
End call ................................... 10
Accept call ............................. 10
Reject call ............................... 10
When a number is busy.......... 11
Redial previous numbers ....... 11
During a call ............................ 12
Swap/Conference ................. 13
Send DTMF tones ................. 14
Babysitter ............................... 15
(& <New entry> ......................... 16
Call/search for an entry .......... 18
Group ..................................... 19
Location .................................. 20
Record no. .............................. 21
Store control code ................. 21
Insert picture ......................... 22
%)%* +
Read Messages ...................... 23
Inbox/Outbox .......................... 24
Compose a message .............. 25
Predefined text ....................... 26
SMS to group.......................... 26
Picture & Sound (EMS) ........... 26
Text entry with “T9”............... 27
Setup ...................................... 29
,- '
Internet access ....................... 30
Browser menu ........................ 31
Setup ..................................... 32
Profiles ................................... 32
Operating instructions ............ 34
./%(0 1(
SIM services (optional)............ 37
2
#
Missed calls ............................ 38
Calls received.......................... 38
Calls dialled ............................. 38
3/
$
Display .................................... 39
Charge settings....................... 39
4
'
+
SMS to group.......................... 42
Call to group............................ 42
Group setup ............................ 44
+
!"#
Diary ....................................... 45
Birthdays................................. 46
Notes ...................................... 47
Alarm clock ............................ 48
Missed alarms ....................... 48
1& $
Time/date................................ 49
Format date ............................ 49
Auto display ............................ 49
Auto phone off........................ 49
Auto timezone ........................ 49
5%6789 '
Game menu............................ 50
Key control.............................. 50
Note........................................ 50
/ +
Setup ...................................... 52
Car Kit ..................................... 53
Headset .................................. 53
No alarm ................................. 53
%% 9& Left soft key ........................... 55
Speed dialling keys ................. 56
- :
Ringer setting ......................... 57
Volume ................................... 57
Silent alert............................... 57
Call screening ........................ 57
Information tones.................... 57
Key tones................................ 57
1 minute beep......................... 58
Melodies ................................. 58
Melody Manager .................... 58
$
Device..................................... 59
Security................................... 62
Network .................................. 63
User group .............................. 65
During a call ............................ 65
Clock ....................................... 65
Accessories ............................ 66
90/ 1 :
4/()* #
3
( $
/
:+
/ :
-
:
Basics ..................................... 74
Data/Applications .................... 74
Car Solutions .......................... 75
Innovations.............................. 75
-2 :
!0 :#
$
%&'()
)
$'*$
')+
(',
(*+($
*(*$
)**$-
.)
$(*'&')')
('
')$+($
&*,$$'))*$'
(*$&)+/ 0
-
.)
$$'.$&'()
*'*'$**(*'
1
+'*(('**('+*'
$/ 0
%&'()
*'
$'*'
$
'$()(**'$
.*$'
*'
$-
.
)
$(*'&')')
*'
'()(*$'**'
$
1)'
$
(
')
)')*($'*(
('')(*'))
'))
'
,
*
%!-(**,.
+2*
'
3%**'$(
.$&*
&.,()
1)*$+
'*$(
')
&$,'$'
'.
4(
5(
,
$
,
*%$.*''$/6
(,0*()*
+($7')&$(
$*.
)*')$$***'
')
('(*
'.4(
8')'))
').*'',
/6(,0*,.
*,(($'*($
/4('&)4()*')
.*'',
'
$)0,
')
()*$'
')$+(*$'(',
).'*$'),&+**'
')',*
+*('*
9
*'
')'
;
:$
$
$.*''$*
)
$*((
'
')*
*'
$
-
.)
$(*'&')
')
*'
*.,1"$
*
$;2$
5(
,
$
,
*%$*(($$
$'
*+
$$.***'
(
,&')')4$'*
'
$
!
$+**'$')&**',3
$
!
<&
4
%*$'')
.*'',+
1&
%('$*,)
.
**(('
(*$:$*,*$'(*$
$'*.,
)
*
''+''+;'
%
(&&
:
''&')')
)
*.
+').*'',
(
+($$*,1)$
&
(')$*
$'')
=&
(
;
>(*('
*'
'
$'*.,
!$=
+.*(
>;
%&'()
)
/$'*.,
0
;$$
(
;)
.
;$$'&(
<
$
2
1
$&'()
*
=
%
7&
4
1
$&'()
*
=
2
/$&'()
,0
2
('
()*
)*$''(
&
1)('('
$
')
$,$*$*,')
,$*$'4'
(
$
1)$,$$*,')9(
$('
$'*.,
/*('
,*'= ) /%!-$+(0*
)
*
''+''+;'
%
1
(**('
$
*,$$')$
',
*')')('
')
>4*=;$$'))'$
'
,
')'
(*
')
;$$')$
',$'
$(
')
)$*
$'$
The following symbols are used:
The menus provide access to functions, network services and individual settings.
%/
To reach the main menu from standby mode:
Press the right key on the outside
right (soft key). >'.$
''$
77>,
2*,
;$$
')$'
$(
;$$
')
'$'
(**
('
/$
',0
%
:$*,$*$
'
,('
('
$
')
$+(
+$(*
$'*'
*,.($$*,
Steps for calling a function as described in this User Guide, e.g.:
%
Press those two keys on the inside
to scroll up and down in menus and
lists.
- ./
The procedure above corresponds
to:
Press soft key.
To carry out the function selected:
Press the right key on the outside
right. Scroll to -
Select-.
Scroll to ./
%('./
/
In other situations (e.g. when the
Phonebook is open) a corresponding
option menu appears:
Press.
//?
The service provider supplies you
with a SIM card on which all the important data for your line is stored. If
the SIM card has been delivered in
credit card size, snap the smaller
segment out and remove any rough
edges.
• Press grooved area n, then lift
cover o.
o
• Insert SIM card in the opening
(contacts pointing downwards)
and push gently until it engages
(make sure the angled corner is in
the correct position r).
r
n
• Insert battery into the phone sideways s, then press downwards
t, until it engages.
t
• Press latch in the direction indicated by the arrow p,Lift battery at
the cutout on the side of the
phone q, then tilt upwards and remove.
p
q
s
• Replace cover and press downwards until it engages.
7,"
'%!-(*$*$
'7
%!-(*$/"
''()
,0(*
'.
$;*$(
'*(',
$+(
+
,
)*+*
(*
The battery is not fully charged when
delivered, so:
• Plug in charger cable at the bottom of the phone, plug in the plugin power supply unit to the mains
power socket and charge for at
least two hours.
• Push the sides of the charger cable plug together and pull to remove it.
:
1
1)()*)*'$&)$
$1)$$
**
'*
$
5)()*$
$$
>
()*
',.*'',$,()**'*.
'
)
$2)*$
,
$$.**
.''*'
?2'
?2/')
()*(
*$)$*$*&*&)')
'*'$?2*.
+.
&')$
*01)+
'*$(
')
&
$,$'
'.4(
(/
If the phone will not switch on after
the battery has been inserted, the
battery may be fully discharged. To
rectify this, insert the battery in the
phone, connect the phone to the
charger provided and charge the
battery for approx. 5 hours. Note
that the charge icon is not displayed
for approx. the first 5 to 10 mins. of
charging.
To display the functions that can be
used without SIM card, switch on
the phone theSIM card:
Press soft key.
Special case:
Emergency number, SOS
(p. 8).
,()*.*'',
+$'
)
$
$'*.,'
'
'$
'*'1)$'*.,'$'*'$
**+*+*$*
')
*'(
'
$/$'*..
&0
2)*+$*,/',0=
.$
$&)').*'',$*,
',
7*'
(*
1 :(*$
'
/0 $'*.,'.,
2*
'
'$
:$*,.*(
'$
)' @
8'&
$*() '
'$
@,'*$
*$'(
#
Hold On/Off/End
key to switch on or off.
The SIM card can be protected with
a 4-8 digit PIN.
Enter your PIN code using the digit keys (shown
a series of asterisks; if
you make a mistake,
press ).
1
7
1
8
!";
@@@@
7
Confirm input with the
right key (press on the
outside).
Logging on to the network will take a few
seconds.
)
*
''+''+;'
%
When the name of the service provider appears on the display, the
phone (/and .
=/
/(
)*
A,$$')$
',,
(*
**(,(*
*,'&
&')
'*%!-(**&')
''*
;!8/
'*+**.*(
'$03
/(
/
A
!"
(/
!');!8$'(
(',')'$
')%!-(*$.*/ 0
('+*'*('+*';!8(
'
()*
;!8/ 0
!%
(/
!B !%
B$$
*,()(
*'$/ 0
"
&
%'')
(
$*
&*$*($')(*
9*',**,*'
$$
')(
('
2)*,
(*'
!,
*
'$,
B)
'&
C,
)
*'
*'(*,$('$*'<%-
'&
/ 0
%,.
$(**(*'
$
')%!-(*/ 0-
.A*
The phone and SIM card are protected against misuse by several security codes and should be treated with
the same care as a cheque guarantee card. For further details (see also
p. 62).
7/(
/
D
!"
;
'('$,
%!-(*/$
*
'(*'
.0
!"+
1)$$'
$'')()*
'*$*,*'
*(($*
'
*('
$
$(*%!-
(*$
C7
,(
D$'
(%!-
(*$*'')&
;!8)*$
.'
8 ;
'('$,
)
-$'.
'*'')$'$(',$''
/'$0
')$('*('
=
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not permit this function.
$
You can change the PIN to any 4-8
digit number (i.e. a number you may
find easier to remember).
Enter PIN.
Press.
, , Enter PIN.
Repeat PIN.
You can change the PIN 2 to any 4-8
digit number (display only if PIN 2 is
available). Proceed as with !".
You define and enter the phone code
when call up a phone code protected
function for the first time. It is then
valid for all functions.
You can assign it any 4-8 digit
number.
!
"
If the PIN is entered incorrectly three
times the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider together with
the SIM card according to instructions. If MASTER PIN or PIN are lost,
please contact your service provider.
'
!
The phone must be switched on
(standby mode).
Enter the number (always with prefix, if necessary with the international dialling code).
A
press clears
the last digit, a press
clears the entire number.
;$$')$,+')$
')
')
'))*$)$'
Store phone
number in the Phonebook (p. 16).
Press the Call key. The
phone number displayed
is dialled.
!
-*,'*'
**(
$*$'
,
)
=
'BEC**$
1)$*($')$''&
'$
')'*'
**
(
;$$
%('')9(
',1)'*'
**(
$$*,8
&*')
*'
*./*,(
'$&')
'
')$''0*$$')2*,
Press the End key (
.
The call is ended.
"#
E$#$+
2
2F
The phone must be switched on
(standby mode).
press
Press
again.
)
.$'*$''.,')'
&
*$*,!'$$'
')
;)
.
')(
$
*$$
*,
F
(*$*,,'
*$&(
(*$/ 0
$%
Press press (
.
:+'$')(*'
')*
.
4
4*5$$'
/ 0*B(*&*'C)*$
.*('+*'/ 0
& $#' If the called number is busy or cannot be reached because of network
problems the following options are
available (depending on service
provider):
• To redial the phone number called:
=
• To redial other numbers that were
dialled previously:
# "
Press. The number is automatically dialled for up
to 15 minutes at increasing intervals. During this
period, no other number
can be dialled. To end:
Press (End key).
"$
Press. Your phone rings
when the busy number is
free. Press the Call key to
dial the number.
!
!" Press. A beep reminds
you to redial the displayed phone number after 15 minutes.
,
')(*$')('
Press the Call key
.
Press the Call key once.
Pick out the required
phone number from the
list, then press...
... to dial.
2*$'$/ 0
%'
)
.')
;)
.
/ 0.
1).$
(*$')*')*+.
(+*
$$*$'
(*
.*(
$$/ 0
(
(*&''*,
')$
'))
('
$*(*/ 0
%&'()
')('(*/.'
'
B,,*$&C/ 0$*('+0=
1)(*$$*,1)(*)*$')
*'
+
'
F
*,'
$'
')$$+(
&'),
$+(
+*$',
)
*((
,/ 0
During a call, you may be advised
that there is another call waiting. You
have the following options:
# Accept the waiting call
and place the current call
on hold.
To swap between the
two calls, press #
each time.
!%
Reject the waiting call.
The caller will hear the
busy tone
if this is set, the caller will
be diverted to the mailbox for example (p. 40).
&
End the current call.
Accept the new call.
You can adjust the handset volume with the arrow keys.
If a car kit is used, its volume setting
does not affect the usual setting on
the phone.
"
You can dial a number with the keypad during a call. The person on the
other end of the line can hear the
number being entered. It can be
stored in the Phonebook or called after the current call has ended.
#
%
('
$*,
'.$
'.,
,
$+(
+
You can call another number during
a call.
You can swap back and forth between both calls or link all callers together in a conference.
During a call, inform the other party
of your intention, then:
>
/
$ Put the current call on
hold.
You can now dial a new number.
When the connection is established,
you have the following options:
# Swap back and forth between both calls.
>')('(*
1)
&9,$$
*,=
GH''
')(*
)
IG
% H''
'))(*
& 1))(*$
" Open call menu and select 1
.
A held call is added (conference call
with up to 5 subscribers).
To end:
All calls are ended simultaneously when the End
key is pressed.
" Open call menu and select 1
.
The original call is joined to the second one. For you, both calls are now
ended.
(
)
The following functions are only
available during a call:
" Open menu.
43%9
Select.
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
Control codes (DTMFtones) stored
in the Phonebook / 0can also be
entered.
" Open menu.
%
%&'()')(
)
!$&'()
')$
')
')
')
(*
')*,
'*'+,=
&+.$.
'**.&)
43%9$*('+
./
J$')*$'+
1
/ 0
3/
5)')(
('
(
'
$')(**'
*/
$'$/ 00')()*
'*$*$*,
43%9 %)'
1
/ 0
%/ :('*(($$'
')*
1 K$'*)**('+(*$
/*'(*'$*
(
(0
*
Only phone number can be dialled. Hold the right soft key on
the outside right.
Hold .
Enter phone code.
' Press.
Confirm input.
5(
Press.
Enter phone code (see instructions below).
Confirm input.
' Press.
\
Select phone number
from ')Phonebook
/ 0 or enter a new one
(with name). The babysitter is now active.
5)$'
',
*'
')/'$0/
0
A
!'*$'
')('
$*$&.''
*,.()**'*,'/ 0
Enter frequently used phone numbers in the Phonebook with a special name. To dial then, simply highlight the name. If a phone number is
stored with a name, it appears on
the display when you are called.You
can assign important phone numbers to several .
+,
Open Phonebook.
G/(
H
G"
H
G
H
G"
H Select.
Activate input fields.
Enter phone number
(with prefix) and name
(for additional fields/input
aid, see adjacent
column).
Press to store the entry.
#
$$')','
*
4*=
9/<
.!
/$
('
$/ 00
<
%('*$'
*
(*'
')')*')%!-
(*/$'**0$()*$)
,
$(*%!-(*/ 0
2
)
/(
*
>+,',$*'
*'(*,*$$*
.&)()'(**$
.$('
*'
)
&'
()*')
.$/ 0
!')($
$')G /(
H,
(*$')'$
','
$*,*$'&')'*'
**
(
$
;$$%('')9
(
',1)'*'
**
(
$$*,
Hold down,'*BEC
**$1)$*($')'&
*'$
')'*
'
**(
G/(
H
F
(*',
B
&C.$
/ *40
:
30
;$$',*','')9
''$$*,1)($
*+*($*
'*$)
'*,
(
'&(
(
'(1)$'''*()
*$*'
*'(*,&''
D;;>H2%>
IJ8$ D*'$*.$*$
*,*'')+*'''
;$$.,'
'')''
.
')($
)
&'
*$')&)
*
-
+')($
%&'().'&D;;>H
2%>
&(*$''$*
'$
5'=KA'E8;
%*(
;$$,*','')()**('$
$*,. 1
'$(*()**('$*'
.$/L0$&'()'
')''
$'= 5& € L M N O
Q
R S
T
U
@
*
G V H W X
Y
Z [
Ξ
Π Σ Φ ΨΩ
K A
)
' E 8
;
P
\ ] Γ ∆ Θ Λ
#
Open Phonebook.
Select a name by entering the first letter (search
function) and/or scroll.
G
H
1
4
.
Dial number.
"$(
Open menu.
.
=
:$*,')$('',
:$*,)
.*
*
()*$
"
2*'*&;)
.
',
4
:'',$('
')
;)
.
4 :'*'$*'(
*'
:
')$'
*
(*'
')'$')
;!8;!8
'))
(
*,*$
.9$'
% %*;)
.
',
0
%',*$*'4'
*%-%
$$*
!
8 $$*$,.
'
*)
./ 0
1
:$*,')(**(',$*
*+**.
#
If there are many Phonebook entries
it is best to assign them to a group,
e.g.:
9/<
.!
A special melody can sound (p. 57)
and/or a symbol can be displayed
(p. 22) if the phone number of a call
is registered in a group.
$
Press Phonebook twice
(in standby mode).
Select group.
<
.!
.
):*
)$*
):*
(# Press. All entries of the
selected group are displayed.
The following functions are applied
to the group or all entries of a group:
Open menu.
.//8 :$*,*'$*$$
'
')
(
2/
2)*')('*
')
2/8 H
+*.$
')$('
/8 $$*$,.
'
*
/ 0
(
1
2*'
.$
*
.,
*
')'
')*(
(/ 0
%
%*%-%'
*.$
*
/ 0
Normally a group is assigned to a
Phonebook entry when it is entered
(p. 16).To change the group assignment or to assign to a group later:
When the Phonebook is open:
Select entry.
(# Press.
' Press.
Select Group.
' Press and select a
new group.
Confirm assignment.
+'
)
The following functions are applied
to individual entries of a group.
Open menu.
.
=
:$*,')',
:$*,')',
()*$
"
7;)
.
***
','
')('
2/8 :'',
,
')
% %*;)
.
',
0
%',*$'4'
*%-%
$$*
!
8 $$*$,.
'
*)
./ 0
-
Open Phonebook.
Select entry.
Open the menu
and select =
.
Go to the input field
<.
An entry can be moved from the
Phonebook to the other storage
locations.
!%)
*
Entries that are stored in the Phonebook on the SIM card can also be
used on another GSM Phone.
!%
Phone numbers can be stored
in a protected area on a special SIM
card. A PIN 2 is needed for editing
(p. 62).
%()//
*
Phonebook entries are stored here,
if
• pictures are assigned to them,
• the memory of the SIM card is full.
+
$.
(Storage location number)
A record number is automatically assigned to every new entry in the
Phonebook.
You can store phone numbers control codes (DTMF tones) in the
Phonebook like a normal entry e.g.
to operate an answering machine
remotely.
$
Enter phone number.
Press.
Press.
&
Open Phonebook.
Go to the input field
2
.
Select entry.
Open the menu
and select =
.
' Keep pressing until the
number you want appears. Only storage
slot numbers are presented for selection.
Press.
Dial number.
Hold down until a
“+” appears on the display (pause for connection setup).
Enter DTMF tones
(digits).
If necessary, enter further pauses of three seconds each to ensure correct processing at the
destination.
Enter a name.
Press.
You can also store the DTMF tones
(digits) without a phone number and
send them during a call (p. 14).
++
#
Assign a picture/symbol to phone
numbers. This picture/symbol will
appear in the display when there is a
call from this number. These entries
are stored in the phone and not on
the SIM card!
Open Phonebook.
Select entry.
Open the menu and select !
.
You can assign a “portrait” to entries. It can be assembled from 9 pictorial elements.
Scroll up and down to
mark the part of the face
(top, centre, bottom).
Use the left soft key to
scroll between the three
views available.
The “portrait” is appended to the Phonebook
entry.
)
"
You can assign one of many standard
symbols to a phone number. Three
symbols are displayed at one time.
The centre symbol is the current
selection.
Scroll in the symbol list.
The selected symbol is
added to the Phonebook
entry.
!"
You may transmit and receive messages on your phone (up to 160
characters).
Depending on the service provider,
emails and faxes can also be sent via
SMS (change setting if necessary,
(p. 29)).
$
)
*
''+''
+;
%
Press the soft key below the letter
symbol to read the message.
:*''
;)
.
$
-$$*
! )
Open reply menu.
,
/
=
-
^=
Display indicates a new
message.
''+''
;
)*+*,-,-+.+.
4//
K
2
Scroll through the message line by line.
Reply menu, see below.
Inbox/outbox menu
(p. 24).
+
-
"
81(&
84
83&
2*'*&,'4'
/ 0
>'$$*(+
*$$*&'4'
'
'
F>%'
')
$$*
87'
')
$$*
*$'**
'4''
')$$**$
*,
When the message has been edited
in the editor, it can be stored or sent
with .
1)
,$&)')$
$*$,.
*$)$"/
%-%$
$*$(*.(+:'
$*+
$$*$/ 0
8.$/0/0/')$$*(*
.*/2*,0$'
');)
.
/ 0
$*$')*$$
*
,
(*.*'
$$*
$,
(+;('$*$)
&')
$$*$
$*(*'*$
'$!
*
'$*()&)$(
')
)
')$$*')(
$
$
$
*,
!"
+
/0/
"*+"(
%
!(0(0
Different functions are available depending on the context:
The list of saved messages is
displayed.
h
g
g
5
(
1
'+$#:+
.
See right.
/(
!(0
H*
D*
(0
8
'$'
%'
Open menu.
.
2
H*',
:(',*$&(
%-%$$*$
:*.
$('
');)
.
')$
=
7'
()*$
4
:'$('$$*
4
:'*'$*'
(
*'
1
:$*,.
$*+
$$*$*')*+**.
(**(',
%
&8 -*')$$**$
*
2
,*$(')
.'
');)
.
.
/7'.
4$'
,0
H9$'+,(
*
'
$$*$$'
!"
# % "%
Open the text menu.
Text input using “T9”allows you to quickly create long SMS messages
using just a few key
entries (p. 27).
To delete letter by letter,
press briefly, hold
down to delete the entire
word.
3$
/ 0
Press.
Dial number or pick out
from the Phonebook.
Confirm.
Select. The message is
sent to the Service Centre for transmission.
Return to the editor.
Open menu and select
to store the
message.
!%.
8
;*9$'$/ 0
+
!
40
\
!
0
:*').
')*
$$
$('
')
;)
.
')$
%*+')(
$$$*
')
'.
4$'
3$
('+*'('+*'1 '
3$
%('')**&)()
')$$*$'
.
(
$
>'*.*
:'')&)
'4'
('$*$
$'
$$*/ 0
!$'$'**'4'')
$$*
!
/ 7;)
.
*(
,
'))
.'
')
'4'
!
C2< !$'DHK
')5;
.
*')'4'
!
/%
!'))
&*$*.'
$')$
$*'
')$+(('*',
'
$
*+**.!')$*'''*$
*$(
'*('
,
$+(
+
1)%'4'
,(*'$')*'
')$$*)*$.'*$'''
')
$+(('&)()
&'$'
+')
$$*&')*('*
!"
+
/
12
3
Standard text fragments which can
be added to messages are stored in
the phone. You can also create five
additional text fragments yourself.
Pictures and sounds can be inserted
in the message. Playback only occurs on phones that support this
function. In input mode a wildcard is
shown instead of the picture/sound.
,
%
0
"
Select.
Write text fragment.
Press.
Compose message
(p. 25).
Open the text menu.
!
0 Select.
Select text fragment
from the list.
Confirm. The text fragment is inserted in the
message at the cursor
position.
#
You can send messages (SMS) as
“circulars” to all entries of a group
/ 0.
Compose the message
as usual.
Open the text menu at
the end of a word.
\ The first of 15 pictures from the picture list
is shown.
Scroll in the list to the desired picture.
The picture is “inserted”
in the text and shown as
a wildcard.
\ Select.
The first of 10 sounds is
played.
Scroll in the list to the desired sound.
The sound is “inserted”
in the text and shown as
a wildcard.
!"
(/4(56
“T9” deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
-3$
First select 3$, then
select 3$
.
Activate T9 and confirm
with .
3$
Select the language in which you
want to compose the message.
Open the text menu then
select3$.
;$$.
')&
(*$
&(*$
'$
A*>$*&
$'
>$*&
&)*
.*
&$('$*$*&
(*()**('
**
$'
)),)')&
=
!1M;
+N$
<
'
'))'>$*&
:*('+*'1 '
*,*
*('+*''**
;$$,*','')()**('$
$*,1
&'$(*()**('$*'
.$/L0$&'()'
')''
$'=
1
3$
Since the display changes as you
proceed (
&
You simply press the keys where the
relevant letter is located once only.
For “hotel” for example type:
Do not use special characters such
as I but write the respective standard character, e.g. -, T9 will do the
rest for you. If the word that T9 has
chosen is not the one you want, see
(p. 28).
Press once for uppercase/lowercase,
Press twice for
digits.
+:
5& € L M N O
Q
R S
T
U
@
*
G V H W X
Y
Z [
Ξ
Π Σ Φ ΨΩ
K A
)
' E 8
P
\ ] Γ ∆ Θ Λ
:$*,')
$'=
$ 1 *('+
(-(+D(*$
&(*$
'$
.
;
!"
+#
-
If several options are found in the
dictionary for a key sequence (a
word), the most probable is displayed first. If the word you mean
has not been recognised, the next
suggestion from T9 may be correct.
The word must be /0/0/. Then
press. The displayed
word is replaced with a
different word. If this
word is also incorrect,
press again. Repeat until
the correct word is
displayed.
If the word you want is not in the dictionary, it may be written without T9
or added to the dictionary.
Words created using T9:
3$-(%
-#
222
+
Select.
The last suggestion is deleted and
the word may now be entered without T9 support. Press to add it
automatically to the dictionary.
Move word by word to
the left/right until the
required word is
highlighted.
Scroll through the T9
word suggestions again.
Deletes the letter on the
left of the cursor and displays the new possible
word!
5')*B1 &
C+*''$*,
'.'&')
'(*(1 $'!
$'(*$$'$.'''
&'')(
'&
Words not created using T9:
Move character by character to the left/right.
Deletes the letter on the
left of the cursor.
Symbols are inserted at
the cursor position.
1 14'!'$($
')
&=D%;*'8
$
*
O2***;*'8
O
D'
;*'8
AO
%'**;*'8
OH
.(
%*
;*'8
O>
;*'8
/ 0:>:
!H!18K;1>%%><AO**'
**''$*&
&
!"
#
%
An SMS profile (maximum 5) defines
the transmission characteristics of
an SMS.
The presetting depends on the SIM
card inserted.
%
You can select a profile from the list
of available profiles. To activate it:
Press.
Open menu.
-
D$')
$('
18 2)*
$
'
$
.
&
2/
+$
H*')
Enter or change the phone numbers
of the service centre as supplied by
the service provider.
2
Enter the standard recipient for this
transmission profile or select from
the Phonebook.
%8 1)$$*',$9$'
*()$$*
8
*%-%$$*
0
=8/
1*$$$
+*%-%
90
1*$$$
+*%-%
"
F
*,'
.'*')
9(
.
,
$+(
+
.
Select the period in which the service centre tries to deliver the
message:
%
+
&%0//@"
@-*4
')*'')$+(
+
'$
You are given confirmation of the
successful or unsuccessful delivery
of a sent message. This service may
be subject to a charge.
4
The reply to your message is
handled via your service centre
when this function is activated
(for information please contact
your service provider).
#$
'
Get the latest WAP information from
the Internet that is specifically adapted to the display options of your
phone. Internet access may require
registration with the service
provider.
\ !
You can set the Internet access profile (see (p. 31)).
The start menu appears, e.g.:
/
>/
+5&/
&
''
Select the required
function
Confirm.
You can now surf the Internet...
Hold to end the
connection.
7 7 '&
1)('$*,$'))'
(
>/
1)(
('
'
')!'
'
+N$
'*$$'*.
$)/*,.$'$'.,
')
+0
5&/
& :$*,'
DHK$$'
'))
*$'*(($$
/
'$
'.,*
+$0
)
&'
$
$ 2/
2*(',+$'*$
')*'*$'')
,
%''
*(($$
$
/ 0
%('"
'
'*
&
=0(
2
$').
&$*(*
&')(
('
&
./
The soft keys may be assigned functions that are controlled online from
the home page of your service provider such as “links” or “menus”
.
"
3
,
<&
The contents of options menus are
also variable.
#$
* Menu access is only possible when
a WAP page is displayed (online or
offline):
>/
(
/.
1)$'5;!''*
')*'$$*,*'(
('
$$'*.$)/*,
.$'$'.,')$+(
+0
5&/
& :$*,'
DHK$$'
'))
*$'*(($$
/
'$
'.,*%+(
;
+$0
)
&'
$
$ 2/
2*(',+$'*$
')*'*$'
,
C2< >'DHK
(',*(
($$*!''*$$
C2< %)
&')!''*$$
')('*
2
1)*$
*
4 2
$').
&$*(*
&')(
('
%
%.
&
=0(
2
$').
&$*(*
&')(
('
000
%''
*(($$
$
/ 0
2
:'')*$*$'+$'
/(*()0
!(0
!.
4
(
$$*$
1
:$*,(**'
*
'*$$$
$
$(*'*'*$$
$
$
*'
$
(,'.
&$*'*
+*''
$(',(*.
$('')$')
*'
$(',$
=
;
/8//
9?
%&'().'&$**
$'**
'$P
%('')$*,
!''
*(($$=
/
5
/
>/
2/
5&/
&
-(8 :$*,').
&$+$
#$
+
#
Preparation of the phone for Internet
access depends on the service provider currently used:
• If the settings have already been
made by your service provider you
may begin immediately.
• If access profiles have already
been assigned by your service
provider select a profile and activate it (p. 33).
• The access profile must be set
and activated manually.
If necessary, check with your service
provider for details.
You can set or change up to 5 access
profiles (may be barred by your service provider). The entries and functions may vary depending on your
service provider. You can change a
profile each time before accessing
the Internet (p. 33).
To create a new profile proceed as
follows:
\ !
Select a profile.
' The entry card is
displayed.
Make your entries field
by field.
You may get further information on
the entries from your service
provider.
/;
8*')
()*'
,
/8 ! ;
>'!;*$$
;
>'
'.
>/;
>')
*/ 0
'
$'.,')$+(
+
<
/;
>''$(
$*'
&)()*(
('
$)
.
'*'
'
*'*
'*$'*$*(
14 48;
>'!%;.
1;
%('!%:8
*
</;
>'
*
;
>'*$$&
/$)
&*$*
$$
*$'$$0
The settings are stored
and the profile list is
shown.
#$
"'#
+45""
=
Activate a profile to establish the Internet connection:
\ !
Select the required
profile.
Press to activate. The
connection is established.
F
!''.
&$$($.,=
)%0
*
;$$'$
;$$'$
Z
P$$ for (full stop)
;$$*',
;
;$$r*', for ~
#$
0#
&1!23
000
Menu access is possible as soon as
WAP pages are displayed (online or
offline).
You can set what is to be displayed
after Internet access:
%
&
Open the browser
menu.
Select.
Select, then select
from the list:
/(p. 30)
5
/ (p. 31)
>/
2/ (p. 31)
5&/
&
The address of the home page is set
in the (access) profile. You can
change it in standby mode (if permitted by the service provider!):
\ !
Select the profile, e.g.:
=81//
Select.
'
The entry card is
displayed.
,
/
>/
Select.
Enter new address. Go
to the end of the entry
card.
Press.
Open the browser
menu.
%
Select.
C2<
Select.
Enter URL and confirm.
The connection is established.
4$
$
You can store a list of your favourite
Internet addresses (URLs) in the
phone depending on the service provider:
5&/
&
Open .
Select.
;
-(&/
& The current WAP address is added as a
bookmark.
;
)=/*
Select, enter name and
URL and confirm.
3
Proceed as with “Save” then select
the stored bookmark in the list and
confirm. The connection is established.
%& '
Most service providers offer you an
external answering service. In this
mailbox, a caller may leave a voice
message for you
• if your phone is switched off or not
ready to receive,
• if you do not want to answer,
• if you are making a phone call (and
if 1 not active, (p. 12)).
If the voice mail service is not part of
your service provider's user package, you will need to register and the
settings must be made manually.
The following description may vary
slightly depending on the service
provider.
9
/(
Calls are diverted to this phone
number. To set it up:
4
e.g.
C
Dial the number of the mailbox.
Registration at the network will be confirmed
after some seconds.
For further information on call divert,
see (p. 40).
-
You can call this phone number to listen to the voice mails left for you. To
set it up:
A new voice mail can be displayed as
follows:
Icon plus beep
a text message announces a new voice mail
you receive a call with an
automatic announcement.
%
./
Call your mailbox and play the message(s) back.
#
Your service provider supplies you
with two numbers:
%(0/(
Select phone number from the
Phonebook or dial/change it and confirm with .
/($$*,*
')*.
4.
')
$+(('0
7'$,
)
'&
,
*,*
'*.
4.*'**$$
&
'
*(($$,
*.
4
Some service providers offer information services (info channels) such
as area codes, stock markets etc.
The information available depends
on the service provider. If reception
is activated, you receive messages
on the active topics in your B3
B.
% 1(
8
4
You can activate and deactivate the
CB service. If the CB service is activated, the operating time of the
phone will be reduced.
!4
All unread CB messages are displayed.
Scroll through the message line by line.
You can add an unrestricted number
of topics to this personal list from
the topic index (see "Topic retrieval",
(p. 37)). You can preset 10 entries
with their channel number (ID) and, if
necessary, name. Five topics can be
active at one time.
"
" Select.
• If no topic index is available (see
"Topic retrieval", (p. 37)), enter a
topic with its channel number and
confirm with .
• If the topic index has already been
transmitted, select a topic and
confirm with .
/
Open the list menu.
If a topic is selected in the list, you
can have a look at it, activate/deactivate it, edit it and delete it.
# )
CB messages are displayed in standby mode, longer messages are automatically scrolled.
The automatic display can be set for
all messages or only new messages
or deactivated entirely.
To switch to “full page view” automatically:
then press 6.
The list of the topics currently provided by your service provider is displayed for you to choose from.
If none are displayed you must enter
the channel numbers (ID) manually
(see “Topic list”
, (p. 36)). Please contact your service provider for details.
4
You can define whether you want to
receive Cell Broadcast messages only in a specific language or in all
languages.
4
1
(*('+*'
1
(*('+*'
8&$$*$(+
')'
(
-$$*$
')'
(**,
*
))')
.$(*.=
*
$'
');)
.
'
*.$/ 0
:
' (optional) Your service provider may offer special applications such as Mobile
Banking, stock market, etc. via the
SIM card.
If you have such a SIM card the service name will appear at the top of the
main menu or directly above the left
soft key.
Icon of SIM services.
If there is more than one application
they are displayed in the “SIM services” menu.
Î !%
With the SIM services menu, your
phone is ready for the future and will
support additions to your service
provider’s user package. For further
information, please contact your
service provider.
(
#
Your phone stores the phone numbers of calls for convenient redialling.
2
Access to the last phone numbers
you dialled.
Select the required call
list and select the
number there.
Dial number
or
information on the
view
phone number:
date, time, number
of calls.
The following call lists are available:
The phone numbers of calls that you
have not answered are recorded for
call back purposes.
Requirement:
The network used supports the
“Caller Identity” feature.
'
All accepted calls are listed.
Requirement:
The network used supports the
“Caller Identity” feature.
*$'*(($$$'*.,
The contents of all call lists are
deleted.
!(
The call list menu can be called up if
an entry is highlighted.
Open list menu.
You can edit an entry, delete it or
transfer a phone number to the
Phonebook.
>*$,*(($$'
')(*$'$
')$'*.,
)&
You can display the charge details
and the duration of calls as you
speak, as well as setting a unit limit
for outgoing calls.
#
2
3/
After you have made the charge detail settings, you can display the call
duration/charge details for the following call types or you can display the
credit balance.
<
-
or when - is deactivated:
<
-
-/
Select a call type.
Display the data.
When displayed, you can:
Clear display.
End display.
2
1
1
Enter the currency in which the
charge details are to be shown.
$
(PIN 2 needed)
Enter the charges per unit/period.
-/
(PIN 2 needed)
Special SIM cards allow you or the
service provider to define a credit/
period after which the phone is
blocked for outgoing calls.
' Enter the number of
units and confirm
with .
Then confirm the credit or reset the
counter. The display of Prepaid cards
may vary depending on the service
provider.
-
Switch between the displays.
-/
If your network supports
charge detail display, the current
units are displayed.
If you have set charge details per
unit, the costs incurred are
displayed.
Special registration may be necessary for this service.
-
Call duration/charges are automatically displayed after each call.
*
'
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
4
;
The most common condition for forwarding is:
#
All calls are diverted.
Symbol in the top line on
the display in standby
mode.
"
(
4
Divert if the phone is switched off or
out of range.
"
Select
C
.
Press.
Select.
Enter the phone number
to which a call will be diverted (if not done
already)
or
select the phone number
from the Phonebook or
from the 7. Confirm with:
After a short pause, the
setting is confirmed by
the network.
C
1)$$''(
+$')
$'
'*'(
'
$/$*$
.
&0=
"
("
5
A call is only diverted after a short
delay (depends on the network). The
period can be set by the user to a
maximum of 30 seconds in 5 second
intervals.
5
Divert if a call is in progress.
>4('
=!1$*('+*'
/ 0,
&)*')(*&*''
/ 0*(*
!
Fax calls are diverted to a number
with a fax connection.
!
Data calls are diverted to a phone
number with a PC connection.
*
$
You can check the current divert status for all conditions.
After a short pause, the current information is transmitted by the network
and displayed.
Condition set.
Not set.
Display if status is unknown (on a new SIM card
for example).
All set diversions are cleared.
1
()(
'*('*(
'
=
$'$('')(
'
;$$
1&
4
%('
8
'')*'')+'$$'
')'&
*
''))
/&)')%!-(*$
()*
4*0
2
1)*$'+')*$.$'
;
(*$&')B%':+'C=
1)$'
.$$*,2
').
=/(
;
(*$&')B%':+'C5)')
$'
.$$*,=
:''))
.
>'&.*(
+
If there are many Phonebook entries
it is best to assign them to a group
(p. 19): 9/<
.!
select a function:
#
A memo (SMS) can be sent as a circular to all members of a group.
Select a group.
<
.!
Press. The group is
confirmed and the editor
is opened.
Compose message
(p. 25).
Press and confirm the
displayed group with
.
Press. The first recipient
is displayed.
Press. The SMS is sent.
Each send operation
must be confirmed.
#
You can call up to five members of a
group or link them together in a
conference.
Select a group.
Press. The group members are listed.
Select the entries you
want to call.
' Press. Highlight entry/unmark entry.
-
5
(
1
=
7
Confirm selection.
Press. The first number is
dialled. When the connection has been established the call is put on
hold.
Proceed with calling the
next entry until all highlighted entries are called
(up to 5, depending on
the service provider).
Open the menu, e.g. to
link the calls on hold in a
conference
)+*
5
(
&;1
4K
(
Open menu.
4
:*('',
2F
HJ('/ 0
1
K*(*$
)
*(
(/ 0
(('')&*'(**
*(')('(*
)
%
%&'()')(
)
!'$$&'()
')
$
')
')
')(*
')*,
'*'+,=
&+.$.
'**.&)
43%9$*('+
./
J$')*$'+
3/
5)')(
('
(
'
$')(**'
*/
$'$/ 00')(*'
()*$*$*,
43%9 / 0
1
/ 0
%/ :('*(($$'
')*
1 K$'*)**('+(*$
/*'(*'$*
(
(0
##
Normally a group is assigned to a
Phonebook entry when it is entered
(p. 16).
To change the group assignment or
to assign a group later, the following
steps are necessary:
Select a group.
Press. The group is displayed for editing.
The following functions are applied
to the group or all entries of a group:
Open menu.
.//8
(
2/
:$*,*'$*$$
'
')$('
2)*')('*
')
2/8 H
+*.$
')$('
1)
'$');)
.
*
'*('
/8 $$*$,.
'
*
/ 0
(
When the Phonebook is open:
Select entry.
(# Press.
' Press.
Select Group.
' Press and select a
new group.
Confirm assignment.
(&&
;$$4
7;)
.
;$$4
:$*,
$
;$$4
:$*,
'$
then select a function
Up to 50 appointments can be entered. An alarm sounds even when
the phone is switched off (the phone
does not switch to standby mode).
To deactivate it press any key.
"
'+'';' '+''+;''
.
If an alarm is missed (e.g. because
you are making a phone call) it appears in the list of missed appointments (p. 38).
G"
H Select.
the entries field by
Make
field:
3;
%/. '4'&')'
''$*,
.*.
1. >')
.%)
&
&')**
%
4
;
A short description can be entered.
2
;
Period for repeating.
4;
Enter start date.
3/;
Enter start time.
Store the appointment.
#
Open menu.
.
-48
=
:$*,')$('',
('+*'
*('+*'**
''
:$*,')',
()*$
"
%'
4
:'')$('',
4
:'**
''$*'
(
*'
% %*
''',
0
%',*$'4'
*%-%
$$*
1
:$*,.
*
'
'$$'
:*('+*'***$/ 02
8
/ 01& / 0
:$*,&)**$*('+
!
H*'$')***'
'$
then select a function
Your phone will remind you of birthdays so you do not forget them any
more.
% %.')*,',
0
%',*$'4'
*%-%
$$*
1
:$*,.
'$
*
5)6
!
*
New entries are added to the birthdays list with "/;, 4;and 3/;.
G"
H
+''#1
+'4
.
G"
H Select.
>'$')*
''$$'/ 0&')
')*
''',5
**$
$*,').')*,$$'
4)(
Open menu.
.
"
-
4
4
4
=
:$*,$('',
>'*&.')*,
('+*'*('+*'**
:'')$('',
:'*.')*,$*'
(
*'
:$*,',
()*$
An alarm will remind you of the birthday twice:
• 24 hours before the start date of
the birthday as entered,
• Directly on the birthday with the
following options:
Open the menu
%*.')*,%-%&')
$'**/()**.0'4'
5
:*').
H*'')***'
'$
%'
')**
If an alarm is missed (e.g. because
you are making a phone call) it appears in the list of missed appointments (p. 38) with the same options
as described above.
then select a function
7 ))
G"
H
>/
.
T9 support makes writing memos,
e.g. shopping lists, easier for you
(p. 27). Protect confidential data with
the phone code (p. 62).
)
Enter the text.
Open menu.
Store the entry.
&
Open menu.
3$
Select entry.
(# Open memo.
G"
HSelect.
:
%'
')',
3$
('+*''''4'',
/ 0
*('+*''
3$
%('')**&)()
')$$*$'
.(
$
< >'*.*
40 :'')
% %
'',
0
%',*$'4'
*%-%
$$*
(Notes continued)
#
then select a function
Open menu.
.
=
"
4
4
:$*,')',
:$*,')',
()*$
>'*&
:'',
$'
:'*
$*'
(
*'
18 ;
'('',&'))
(
/ 0
% %
'',
0
%',*$'4'
*%-%
$$*
1
:$*,')(**(',$*
*+**.
!
*'
1=
5(
,
''
$'
*,*$$
&
$/;!818'(0)
" !
Use this function to set time
for the alarm call. The alarm sounds
even when the phone is switched
off.
833 Switch the alarm on
and off.
' Display the set time and
date for the alarm call.
9" Set the time for the alarm
call (hh:mm:ss).
Set the days for the alarm
call with '.
Appointments with alarm which you
have missed are listed and can be
displayed.
$
1&
"#
( The phone switches off each day at
the set time.
The clock must be set correctly once
at start-up.
-;
' Press.
First date
(day/month/year),
then time (24 hours including seconds).
1)$('
$'(*'
/
/ 0
) Setting of the date format:
44%%^^^^ or %%44^^^^
"#
The time display can be switched on
and off.
Press.
Enter the time
(24 h clock).
Confirm.
4;
Press.
Confirm.
!').*'',$
+
')*
*.
'$(
$')(
($'.$'
" 7
If this feature is activated, you will be
asked if you want to change the time
whenever you cross into a new time
zone.
+,-./
'
\ /
5%
BattleMail™ Kung-Fu is an action
game where you must defeat an enemy by combining attacking and defending moves.
%
You are playing against the “phone
enemy”
. Registration is not needed
for this.
First select one of five warriors
which are to fight for you. Now set 6
attack and 6 defence moves each.
4
2
See “Key control” below.
Press. The battle begins
and is shown on the
display.
> Provides information on how to play
the game.
8
The attack and defence moves can
be executed in three directions:
Confirm move.
Select attack/defence.
Retract one move.
BattleMail™ Kung-Fu will soon be offered by many service providers in a
multiplayer version to be played
worldwide via SMS and/or e-mail.
Your phone must be enabled (registered) to use this play mode. Get the
relevant information from the Internet under:
;/8//
&
\ /
Select game
\ /
Select a game from the list and have
fun!
You will find special instructions for
each game in the option menu.
Provides tips on how to
play the game, shows
the saved scores and allows you to set the level
of difficulty.
Start game.
8)
!
('
$
')*
use the keys
and
You can activate and deactivate the
following functions for the games:
You can switch the sounds for the
games on and off.
!/
You can switch off the display illumination to increase standby time.
You can switch the silent alert for the
games on and off.
+
If a profile is used, several settings
are made with function.
• Five profiles are standard with default settings, they can be
changed however:
"
/_
"
1
7>
• You may set two personal profiles
individually:
+
• The special profile "
/ is fixed
and cannot be changed (p. 53).
If the phone is used by several people, they can each activate their own
settings by selecting their personal
profile.
"'
Select default profile or a
personal profile.
Activate the profile.
!
"
/
_
! "
-
Highlights the active
profile.
#
Edit a default profile or create a new
personal profile:
Select profile.
Open menu.
1 Select.
The list of available functions is
displayed:
2
) :*
./
) :*
%
) :*
) :*
1
) :*
!
/ ) :*
7
) :*
5/
) '*
5
) '*
!/
) '*
When you have finished setting a
function you return to the profile
menu where you can change a further setting.
(
Open menu.
-
18
2/
1
/
('+*'
2)*
$''$
H*$
*
2
,$''$
*
')
select a function:
8
If an original Siemens Car Kit is used
the profile is activated automatically
as soon as the phone is inserted into
the cradle (see also p. 66).
9
If an original Siemens Headset is
used the profile is activated automatically as soon as the headset is
plugged in (see also p. 66).
All alarms are deactivated.
It is ( to modify this profile.
• The phone will be switched off
when you select this profile.
• In this status, alarms are indicated by the ringer or trembler
alarm.
#
Î
"
Select"
/.
Activate the profile.
Profile selection must be
confirmed.
Then switch off the
phone, otherwise the
phone switches itself
off automatically after
30 seconds.
The next time you switch on the
phone and return to normal operation the default profile "
/
will be activated.
%%
Create your own menu with frequently used functions, phone numbers or WAP pages.
The list of 10 entries available is preset, however you can change it according to your wishes.
*$'*(($$
$'*.,
=
;$$')
... press '&(
You can replace each preset entry (110) with another entry from the selection list of %%.
Select the required entry.
Press.
' Press.
Select the new entry in
the list of your favourites.
Press.
"##
Select the required entry.
Press.
!')$('',$*)
.,
(**$
(*'
&')')2*,
If you have selected a phone number
or a WAP favourite as a new entry,
the relevant application opens to
choose from.
$
After confirmation and after entering
the phone code, the default entries
are set.
/
The left soft key and the keys 2 to 9
(speed dialling numbers) can each be
assigned an important phone
number or a function. The phone
number can then be dialled or the
function can be started at the touch
of a button.
-!
('
*,**,)*+.
*
')$
',.,,
$+(
+/*(($$'
B%!-$+(
$C0!'*,
'.
$$.'
,')$
,*$$'
1)$
',*,$
'$.*(
&')g?'
*(($$*&$$*
Key assignments available:
• Internet .............................. (p. 30)
• Phone number ................... (p. 16)
• Alarm clock ........................ (p. 48)
• New SMS .......................... (p. 25)
• Illumination ........................ (p. 60)
• Hide ID............................... (p. 65)
• Games ............................... (p. 50)
• Missed calls....................... (p. 38)
• Calls received..................... (p. 38)
• Inbox (SMS) ..................... (p. 24)
• Outbox (SMS) .................... (p. 24)
• My Menu ........................... (p. 54)
• Call screening .................... (p. 57)
The soft key can be used for fast
access.
&
)
*
''+''
+;
!
%
: Press (
.
' Scroll to the application in
the list.
• Assign the new application (e.g.
"%) to the soft key.
• Special case /(
. Pick
out a name from the Phonebook
(e.g. “Carol”) to assign to the
soft key.
Confirm setting.
#
)
The setting “Carol” is used here only
as an example.
Hold .
/
#!
#
Digit keys 2 to 9 can be used as
speed dialling numbers for fast
access. For available key assignments, see / 0.
Select a stored phone number or
start a stored application (e.g.
Games).
In standby mode:
1)
&,$$+=
M*.
4./ 0
&
In standby mode:
Press digit key (2-9). If
the key is not assigned:
Press.
press (
(if assigned
with e.g. R%`).
' Scroll to application in the
list.
Special case /8
(
. Select a name from
the Phonebook for assignment to the key.
Special case !
.
Scroll to an URL in the
bookmark list for assignment to the key.
Confirm setting.
)
Press.
The assignment of digit key 2 is displayed instead of the left soft key,
e.g.:
hold /
hold .
$
You can set the tones that sound in
specific situations to suit your particular tastes.
-
select a function:
$
Activate/deactivate the ringer or reduce it to a short beep.
#
$
Beep is active
Ringer is deactivated.
!$'*.,
=*('+*'*('+*'*$
&')=
&
: Select the range:
-
1
-/
%
1(
Set volume.
Confirm.
:$*,$$+
!'&
$**')
.$*$
'
,
)
,
(*$''
+
$
')/ 0
:
To avoid acoustic interference by the
ringer, you can activate the trembler
instead. It can also be active in addition to the ringer (e.g. in noisy environments). The trembler is deactivated when the phone is inserted into
the desktop charger or into the
Car Kit.
Only calls from numbers that are in
the Phonebook are signalled audibly
or by the trembler. Any other calls
are merely displayed.
If you do not accept these calls they
are diverted to your mailbox (if set,
(p. 40)).
%
Display when activated.
Set service and alarm tones:
On or Off.
=
On and Extended.
8
Set the the acoustic key tone:
1& or3or $
#
; #
During a call you hear a beep after
every minute as a reminder of the
time elapsed.
You can choose from 20 stored melodies and four individual melodies
that are loaded (! to ).
Select the type:
-
1
-/
%
1(
%/
/$.
&0
Select the melody.
Confirm.
2
$
*+*
$&')%
'
:*'*K
,
;2/ 0
You can use this function to manage
your melodies.
2 )
- %
%%
Select.
Select memory location
! to .
Load melody to the
buffer.
! Play melody.
!
A melody is transferred to the buffer
via SMS/WAP. When a melody has
been received an icon appears above
the left soft key. Press this key to
start the melody manager.
A loaded melody must be stored on
! to for later use:
Open menu.
Select memory location
! to .
Store melody.
)(
Open menu.
<
4
4
;*,')('
,
%'
,
')
,
(*'
/!'
0
K
*
,
!
'
:'('
,
')
.
:'
,
!
'
%
,+*%-%
'
4
Select a function.
2
Set the language of the display texts.
When “automatic” is set the language of your service provider is
used. If a language that you do not
understand happens to be set, the
phone can be reset to the language
of your service provider with the following input:
9:;;;;:"
7 )
The Screensaver shows a graphic after a period of time which the user
can set. It protects the phone against
unauthourised use (p. 60), like the
key lock. An incoming call or a long
press on and confirmation with
will end the function.
You have the following options:
• Activate/deactivate the function.
• Set style: Graphic, analogue clock
• Load graphic via 5/
.
• Test Screensaver.
• Set period after which the Screensaver starts.
• Activate password query as a security setting.
$
5/
A graphic can be transmitted to the
Bitmap viewer via SMS from a provider or downloaded via WAP.
• Show stored graphic
5/
Open.
Select or
<.
Graphic is shown.
• Receive graphic
A received graphic is indicated by a
symbol above the left soft key. By
pressing this key, the Bitmap viewer
is started and the graphic is displayed.
• Store graphic
Store current graphic in the Bitmap
viewer:
• Select or <.
5/
8%
Open menu.
%'
')('*)(
')$'
*
(*'
$
<
K
**)('
')A'*
+&
4
1)('*)($
$(*
4
:'**)(
8
<
%*)(+*%-%
%
'
4
Select a function.
8)
(Display continued)
-&
!/
You can press any key to accept an
incoming call (except ).
The display illumination can be
switched on and off (this affects the
standby time).
5
You can choose between two font
sizes for the display.
5/
Select between two animations that
are shown in different situations, e.g.
when entering a PIN.
The greeting is displayed when you
switch on the phone.
' Activate/deactivate.
Delete old message and
compose new message.
Confirm changes.
1
Setting of the display contrast.
-&&
The automatic key lock activates automatically when no key has been
pressed for one minute. This prevents unintentional activation of the
phone key, however you still remain
reachable and can make an emergency call.
The keypad can also be directly
locked and unlocked.
As follows:
Hold down.
Confirm (switching off
only).
7
Set the type of acoustic key tone:
1& or3 or 4
Select a function.
9
The phone is reset to the default values (does not apply to SIM card and
network settings).
The phone identity number (IMEI) is
displayed. This information can be
helpful for customer service.
9
When this function is active, network reconnection is speeded up
(standby time is reduced).
- 3$
Activate intelligent text entry or deactivate it.
3$
Select language in which the message is to be composed.
+
The phone and SIM card are protected against misuse by several security codes and should be treated with
the same care as a cheque guarantee card.
select a function:
!"
1 !"1 !"+
1
(p. 9)
4")
) *
Only number can be dialled. Hold
the right soft key on the outside right (p. 15).
#)
) !"+ *
Dialling is restricted to the numbers
in the Phonebook, new numbers are
not available. If only area codes are
entered, the relevant phone numbers can be added to these manually
before dialling.
Depending on whether the Phonebook is stored on the SIM card or in
the phone, the PIN 2 or the phone
code is requested before changes
can be made.
+)
) !"+
*
The dialling options are restricted to
SIM protected phone numbers. If
only area codes are entered, the relevant phone numbers can be added
to these manually before dialling.
2<;)
) *
Calls are limited to the call list (p. 38)
of “dialled numbers”
. This list can be
filled with phone numbers specifically for this purpose:
First delete the call list, then create
“new entries” by dialling phone
numbers and cancelling before the
connection is established.
)
) *
Your phone is prevented from being
operated with a different SIM card.
!
"
& select a function:
This function is only displayed if it is
supported by your service provider.
3phone numbers
must be registered on the phone.
Select the currently used phone
number.
&
Display the active phone
number.
"
&
The list of GSM networks currently
available is shown.
'
Indicates forbidden service providers (depending
on SIM card).
1
&
The network search is restarted. This
is useful if you are on your home
network or want to register on a 8
network. The network info list
is rebuilt.
-
&
%(*$''$(*.*
*()
)
./
,(*+''(0
%&'()'
')9)
.$'
1
$&'()'))
./$'*.,
0=
;$$
* ;$$
Activate or deactivate, see also
“1
&” above.
If "Automatic network" is activated,
the next network is dialled in the order of your "preferred service providers". Otherwise a different network
can be selected manually from the
list of available GSM networks.
<&
"
) *
You may limit usage to one phone
number.
A list of all known GSM Networks
worldwide is displayed with the current codes.
5
Select either GSM 900 and
GSM 1800.
"
&
select a function:
&
The service providers you prefer after your home service provider are
displayed in this list (e.g. if there are
several service providers that differ
in price).
When this function is activated, the
list of your service provider is displayed first. You can edit it as
required:
Display list of preferred
networks.
• Create new entry:
"
Select,
then scroll to an entry in the list of
the service providers and confirm.
• Change/delete old entry:
Select existing entry and delete it or
select an entry from the list of networks and confirm.
4
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4 digit password that your service provider supplies you. You may need to be registered separately for each barring.
All outgoing calls except emergency
number 112 are barred.
Only national calls can be made.
0/
International calls are not permitted.
However you can make calls to your
home country when abroad.
-/
The phone is barred for all incoming
calls (the forwarding of all calls to the
mailbox offers a similar effect).
,
/
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
&
The following info can be displayed
after a status check:
Barring set.
Barring not set.
Status unknown (e.g.
new SIM card).
1
All barrings are cleared.
#
C
4
then select a function:
If offered by the service provider, this
service enables groups to be
formed. These have access for example to internal (company) information or special tariffs apply to them.
Check with your service provider for
details.
C
Activate or deactivate the function.
“User group ” must be deactivated
for normal use of the phone (phone
code, (p. 62)).
You may select or add groups other
than the preferred groups (see below). The service provider supplies
you with code numbers for the
groups.
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
If activated, only calls within this
standard user group can be made
(depending on the network configuration).
1
If you are registered for this
service you can check whether it is
set, and you can activate or deactivate it (p. 12).
>!4
When you make a call, your
number may be displayed on the recipient's display (depending on the
service providers).
To suppress this display, you may
activate the “Conceal ID” mode for
the next call or for all subsequent
calls. You may need to register separately with your service provider for
these functions.
!
(see p. 49).
"
-
then select a function:
/
8
If an original Siemens Car Kit is used
the profile is activated automatically
as soon as the phone is inserted into
the cradle.
C
8(;
-
/*('
,*'=
0
Calls are accepted after the 3rd ring.
Depending on the setup the ignition
may need to be switched on. Bugging is possible!
# Indication on the display.
-
/*('
,*'=)
$0
The phone is powered by the car's
power supply. The time between
switching off the ignition and deactivation of the phone can be adjusted.
-/;
• Permanent illumination:
Switched on,
• Auto key lock: Switched off,
• Charge the phone battery,
• Automatically activate CarKit,
when the phone is inserted.
If an original Siemens Headset is
used the profile is activated automatically as soon as the headset is
plugged in.
C
8(;
-
/*('
,*'=
0
Calls are automatically accepted after the 3rd ring. You should be wearing the headset. Other people may
be able to hear the phone.
(
>
Switch to Headset during a call (if the
phone is connected to the Headset).
$
Activate and deactivate.
-/;
Accept call with the Call key or PTT
key (Push To Talk) when the key lock
is activated.
-/
!,
*'
'(*(
(*')$
*$')*''*,.
+)*.,
')$
/
These functions are only available
with the appropriate original Siemens accessories (p. 74).
/'&
#/
90/
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
data communication/fax communication must be available on your PC
and there must be a connection to
the phone.
Fax and data services must be enabled by the service provider. Different networks support different types
of fax/data reception, contact your
service provider for details.
)/ .
Your service provider has given you a
number for telephoning and a fax/data number.
Start your PC communication program and enter the required destination phone number in the program.
!
The call is signalled by a special ringer and the type (fax or data) is
displayed.
Now start the communication program in your PC to receive the
fax/data.
:
90/
0
Set this function on the phone (
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following soft key is available for
two seconds:
(837 Switch to 0
mode. You may now
send a fax.
!
( if a special fax or data number
is available)
Start the required communication
program in your PC and switch on
the function at the phone the
call (the PC accepts the connection).
90/
.0
&
End transmission with PC software
and/or press .
*
& !"
#
4
%'')
(
$*
2)*(
'
%
&
'
(
H
,(*$$'
')
;)
.
(*$*+'
H
#
'
'**'
%)
'/.0
,
*$$'
1*$$$
(,'
)
8
'&
*(($$
K*('+/
$0
K
*
('
*('+
D
&'&
('
;)
.
(-( !(*'$&)')
&
(*$''$**('+
3$
+
,
-
'
*)*$'
%'*'
*('+
;)
.$*$=
7')%!-(*
!');)
,
7')%!-(*/;!8
'('0
*$'
(
)
A*'',(*'
,
(*('+
@A@
.
/
14''1 5;7
5;7
5;8
'&
2*'*('+
1
-
-'
2*
&
-$$*(+
"
(*(+
0
D*$&(*
%!-
,
%'
;)
.
H'+
;)
.
%!-$+($
$
%&'())*$'
1 &
$('
.
) $
!
.$
((&)$'))
','
*$
'
)$'!')
.$$'$
()(&'),
$+(
+
')%$%+(
(/
(
Phone cannot On/Off key not pressed long
be switched on. enough.
(
/
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in the display.
Battery contacts dirty.
Clean contacts.
See also below under: “charging
error”
Standby time
too short.
Frequent use of the organiser and Restrict use if necessary.
games.
Speed search active.
Deactivate speed search (p. 61).
Display illumination on.
Switch off display illumination (p. 60).
Unintentional keystroke (illumina- Activate key lock (p. 60).
tion!).
Charging fault Battery totally discharged.
(charge icon not
displayed).
SIM error.
1) Plug in charger cable 2) Wait for approx. 5-10 minutes until the charge icon is displayed 3) Charge for
5 hours Temperature out of range:
5 °C to 40 °C.
Make sure the ambient temperature is right, wait a
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device interface, clean
them if necessary, then insert battery again.
No mains voltage.
Plug in to a different socket or check voltage.
Wrong charger.
Only use original Siemens accessories.
Battery fault.
Replace battery.
SIM card not correctly inserted.
Make sure that the SIM card is correctly inserted (p. 6).
SIM card contacts dirty.
Clean the SIM card with a dry cloth.
SIM card with wrong voltage.
Use 3 V SIM cards only.
SIM card damaged (e.g. broken). Inspect the damage. Return the SIM card to service
provider.
.
:'
(/
No connection to
network.
) (
Signal weak.
(
/
Move higher, to a window or open space.
Outside GSM range.
Check service provider coverage map.
SIM card not valid.
Reclaim at the service provider.
New network not authorised. Try manual selection or select a different network
(p. 63).
Network barring is set.
Check barrings (p. 63).
Network overloaded.
Try again later.
Phone loses
Signal too weak.
Reconnection to another service provider is automatic
network.
(p. 63). Switching the phone on and off may speed
this up.
Calls not possible. 2nd line set.
Set line 1 (p. 63).
New SIM card inserted.
Check for new restrictions.
Charge limit reached.
Reset limit with PIN 2 (p. 62).
Credit used up.
Load credit.
Certain uses of the Call restrictions are set.
Barrings may have been set by your service provider.
phone not possible.
Check barrings (p. 63).
Entries cannot be Phonebook is full.
Delete entries in Phonebook (p. 20).
made in Phonebook.
Voice mail does not Call divert to the mailbox not Set call divert to the mailbox (p. 35).
work
set.
SMS (text message) SMS memory full.
Delete messages (SMS) to make room (p. 24).
flashes.
Function cannot be Not supported by your serv- Contact your Service Provider.
set.
ice provider or registration
required.
Charge counter
Charge pulse not transmitted. Contact your Service Provider.
does not work.
.
) (/
Message cannot be
sent.
PIN error.
Phone code error.
Service provider code
error.
Too few/too many
menu entries.
No fax possible.
(
Service provider does not support this
service.
Phone number of the service centre is
not set or is wrong.
SIM card contract does not support this
service.
Service centre overloaded.
Addressee does not have a compatible
phone.
Three wrong entries.
Three wrong entries.
No authorisation for this service.
:
(
/
Check with your Service Provider.
Set service centre (p. 29).
Contact your Service Provider.
Repeat message.
Check.
Enter the MASTER PIN (PUK) provided with
the SIM according to the instructions. If
MASTER PIN or PIN are lost, contact your
service provider.
Contact Siemens Service (p. 72).
Contact your Service Provider.
Functions may have been added or re- Check with your Service Provider.
moved by the service provider via the
SIM card.
Incorrect settings in the PC.
Check settings (p. 67).
No authorisation for the service.
Contact your Service Provider.
4/
Severe shock.
Phone became wet.
Remove battery and SIM and insert them again. Do not dismantle the phone.
Remove battery and SIM card. Dry immediately with cloth, do not heat. Dry connector contacts thoroughly. Stand unit upright in an air current. Do not dismantle the
phone.
2
;9Y$$$$Y
')
*'
(*.
')!''=
;/8//
$$
&
:+
Worldwide support by Siemens Partners is only a phone call away or available
on the Internet at=;/8//
Abu Dhabi ......... Siemens Service
Center..................... 0 26 42 38 00
Australia............ Siemens................ 18 00 62 24 14
Argentina .......... Siemens............. 0 80 08 88 98 78
Austria* ............ Siemens................ 05 17 07 50 04
Bahrain.............. Siemens.......................... 40 42 34
Bangladesh ....... Siemens.................. 0 17 52 74 47
Belgium ............. Siemens.................. 0 78 15 22 21
Brunei................ incomm ..................... 02 43 08 01
Bulgaria............. Omnitel ...................... 02 73 94 88
Cambodia.......... Siemens..................... 12 80 05 00
Canada.............. Siemens............. 1 88 87 77 02 11
China................. Siemens............. 0 21 50 31 81 49
Croatia .............. Siemens.................. 0 16 10 53 81
Czech Republic.. Siemens................ 02 33 03 27 27
Denmark* ......... Siemens..................... 35 25 86 00
Dubai*............... Siemens.................. 0 43 96 64 33
Egypt ................. Siemens.................. 0 23 33 41 11
Estonia .............. Siemens....................... 6 30 47 35
Finland*............. Siemens................ 09 22 94 37 00
France* ............. Siemens................ 01 56 38 42 00
Germany*, ** ... Siemens............. 0 18 05 33 32 26
Greece............... Siemens.................. 0 16 86 43 89
Hong Kong ........ Siemens..................... 22 58 36 36
Hungary ............ Siemens................ 06 14 71 24 44
Iceland .............. Smith & Norland.......... 5 11 30 00
India .................. Siemens................ 01 16 92 39 88
Indonesia .......... Dian Graha Elektr. 02 14 61 50 81
Ireland* ............. Siemens................ 18 50 77 72 77
Italy ................... Siemens................ 02 66 76 44 00
Ivory Coast ........ Siemens..................... 80 00 03 33
Jordan............... Siemens.................. 0 64 39 86 42
Kuwait............... NGEECO....................... 2 45 41 78
Latvia ................ Siemens....................... 7 50 11 14
Lebanon*...........F.A. Kettaneh ............ 01 44 30 43
Libya ..................Siemens ............... 02 13 35 02 31
Lithuania............UAB Skaidula .............. 2 39 77 79
Luxembourg.......Siemens ................... 43 84 33 99
Malaysia............Siemens ............... 03 79 52 51 84
Malta .................Siemens ..... 00 35 32 14 94 06 32
Mauritius ...........Ireland Blyth ................ 2 11 62 13
Morocco ............Setel S.A. .................. 22 66 92 32
Netherlands*.....Siemens ............ 0 90 03 33 31 00
Norway* ............Siemens .................... 22 70 84 00
Oman .................Siemens ........................ 79 10 12
Pakistan .............Siemens ............... 02 15 66 22 00
Philippines .........Siemens .................... 28 14 98 88
Poland................Siemens ............... 08 00 22 09 90
Portugal* ...........Siemens ................. 8 00 85 32 04
Qatar..................Siemens .................... 04 32 20 10
Russia................Siemens ............... 09 57 37 29 51
Saudi Arabia......Siemens ................. 0 22 26 00 43
Sharjah ..............Siemens ................. 0 65 33 66 42
Singapore ..........Siemens ...................... 8 45 48 18
Slovak Republic .Siemens ............... 07 59 68 22 66
Slovenia.............Siemens ................. 0 14 74 63 36
South Africa.......Siemens ............... 08 60 10 11 57
Spain .................Siemens ................. 9 02 11 50 61
Sweden* ...........Siemens ................. 0 87 50 99 11
Switzerland........Siemens ................. 0 12 12 00 90
Taiwan...............Siemens ............... 02 25 18 65 04
Thailand.............Siemens ................. 0 27 15 51 00
Tunisia ...............Siemens .................... 01 86 19 02
Turkey................Simko ................ 0 21 65 71 89 89
United Kingdom*Siemens............ 0 87 05 33 44 11
USA ...................Siemens ............ 1 87 76 87 16 71
Vietnam .............Opticom ..................... 45 63 22 44
Zimbabwe..........Siemens .................... 04 36 94 24
** 0,24 DM/Minute
F
(*.,
*%$*(($$
$*';/8//O
')(
'$*&')**$'$@,
(**$
(*'))
.
$)
&
P
&
:
#
Siemens Information and Communication mobile hereby declares that
the phone described in this user
guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE).
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you require a copy of the original.
The SAR recommendations of
ICNIRP are met.
(
<%-(*$$=
9(,*=
<%-(*$$=
9(,*=
5)'=
:$
$=
/5*''0
-P
/5*''0
-P
44
/((0
7*'+
'*= "
'
7*'
'*'=
?2'
?2
%'*.,'=
))
1*'=
%!-(*=
"
'
%H=
5
• The SIM card should be treated
with the same care as a cheque
guarantee card. Do not bend or
scratch it or expose it to static
electricity.
• Clean the card with a damp cloth
or an anti-static wipe without
chemical cleaning agents.
• Protect the phone from moisture
and shocks. Do not expose your
phone to direct sunlight.
• Remove the battery if you are not
going to use the phone for extended periods of time (more than one
month).
!4
F
&')
&'*$,
$,
)
%!-(*;*$'
)').
')%!-(*/
')
(*0=
'$*.
'))
/').*'',0=
2$'
%+(.
')$+(
+=
<
!,
$,
)
*
%!-(*
(
'*(',
$+(
+*',
'
+'$$
P
:
$
*
"%>5
)'/-*
K8
<8!5
)#'/-*
K8
1)K!
A*'',(*$$')$'*.,*
'*'*&)$$(*',$$
3
1
K8/>
0
K8/D0
4&31
K8
>*.$$'*
$()*
'))
.*'',**$*.*'',
> 33
K8
2
(> 33
K8
1
1
K8
%(>
K8
%(>
-
K8
-
.)
(
('*
'
*
'*!*(
.*'
&')')*$'
;11
')2*';
'*.
1
K8
*'$*.'(**(
*$'
'))
'
(
')$
.*$
3&\1
&
K8
2*,%'*)*$'
'
+'
51
&
K8
&$)*$'**$'*
$,
()*$')
.)
')(*
1<! 61
>4()**.'
*.
''
$)
Q K)'%'
K8
Q '-**
K8
Q 2
%,
K8
Q $)K
K8
Q :,%*+**
K8
Q %);*
K8
Q -'*(<*$$
K8
Q 1()
7(*
K8
1
1
Q K*')
$'
Q A'2*$
Q 8
2*$
Q <2*$
Q K
2*$
Q K*')2*$
Q %)
A*
K8
K8
K8
K8
K8
K8
K8
"##
4<&'
K8
41(
K8
P
$
1
7 (
K8
*$'&')'*'
$*
*(
)
**'
'**'%
,'
')(*'')'$
('!*
.',.'&+)($
1
71/
K8
*$'&')$'(*$$'*(*9*
',*
*'(
+(!($*
')(
'$9
$'**'
1)
+**'*$
'
(*.
.'*
,
$(*$'*
1
7 K8/<*,$'*0
1
7 .!!
K8/<*0
K8 />$)0
K8/()0
*$'&')+
((
'
(**(
',
')**$>('
($.
4
&')(
('
*4**'*$$
$
+*,
'.
!($*')(
'$9
$'**'
1)+
**'*$
'
(*.
.'*
,
$(*$'*
1
7C
K8
2*
*,
)*$'
')2-%%K
$
:
1
7
Q 2**$'
K8
Q ":*'2*. K8
Q :*'*2*.
;
$$
*
K8
'
% 8 C5
K8
%'
)*$'
)*$'**$
$
9*',&)*,-;*
$1)-A-'*2*(
$
'$
$(9*',1)
*(*($')$
'&*
&
*
*')D%A(
('(*.$
>/
K8/<*,0
K8/!'*,0
K8/%*0
K8/*(0
K8/<*'A'*0
K8/:*0
K8/8
&*,*0
2
('$')
.)
'
')4'
&
*.*'
*'('*$
<%-
(*$'
*)
<%-(*$*+''
')4'&
;AR&')
'*'
*
()*$*(*.)*
')
;
('$(*.
.'*$(*$'$)
$
"$'
$)
=
Original Siemens accessories
;//
/(
:
$*
$(!01"
THIS MODEL PHONE MEETS THE
EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your mobile phone C45 is a radio
transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radiofrequency (RF) energy
recommended by The Council of the
European Union. These limits are
part of comprehensive guidelines
and establish permitted levels of RF
energy for the general population.
The guidelines were developed by
independent scientific organisations
through periodic and thorough evaluation of scientific studies. The limits
include a substantial safety margin
designed to assure the safety of all
persons, regardless of age and
health.
The exposure standard for mobile
phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit recommended by The Council of the
European Union is 2.0 W/kg.* Tests
for SAR have been conducted using
standard operating positions with
the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified
power level, the actual SAR level of
the phone while operating can be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station antenna, the lower the power output.
Before a phone model is available for
sale to the public, compliance with
the European R&TTE directive must
be shown. This directive includes as
one essential requirement the protection of the health and the safety
for the user and any other person.
The highest SAR value for this model
phone C45 when tested for compliance against the standard was
0.93 W/kg. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the EU requirements for RF exposure.
@ 1)%H'
.)
$$.,')
.($&*''$
*/50*+*
+'*$
'$$1)'(
*'$*$.$'*'**
$*','
+
*'
*
'('
').(*'
*(
(
'
*,+**'
$*$'$
%H+*$*,+*,
*'
*
'9'$*')'&
.*
%H
*'
')
$
*$
('
*'
*'
;/8//
-9
///<
$*
$(!"
THIS MODEL PHONE MEETS
REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your mobile phone C45 is a radio
transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio
frequency (RF) recommended by international guidelines (ICNIRP).
These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were
developed by independent scientific
organisations through periodic and
thorough evaluation of scientific
studies. The guidelines include a
substantial safety margin designed
to assure the safety of all persons,
regardless of age and health.
The exposure standard for mobile
phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is
2.0 W/kg*. Tests for SAR are conducted using standard operating positions with the phone transmitting
at its highest certified power level in
all tested frequency bands. Although
the SAR is determined at the highest
certified power level, the actual SAR
of the phone while operating can be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
::
lower the power output of the
phone.
The highest SAR value for this model
phone C45 when tested for use at
the ear is 0.93 W/kg. While there
may be differences between the
SAR levels of various phones and at
various positions, they all meet the
relevant international guidelines for
RF exposure.
*
1)%H'
.)
$$.,')
.($&*''$
*/50*+*
+'*$
.
,'$$1)
$(
*'*$.$'*'**
$*','
+*'
*
'('
')
.(*'
*((
'
*,+**'
$
*$'$%H+*$*,+*,
*'
*
'9'$
*')'&
.*
%H
*'
')
$*$
('
*'
*'
;/8//
%!R
:#
'
$
Accessories ......................... 74, 75
Alarm clock ................................ 48
Alarms missed ........................... 48
Answering service (external) ..... 35
Appointments ............................ 45
Auto answer (in the car) ............ 66
Auto redial ................................. 11
%
Babysitter ..................................
Band selection ...........................
BattleMail™ Kung-Fu .................
Beep, ringer ...............................
Big letters ..................................
Birthdays ...................................
Bitmap viewer ...........................
Bitmap, load ..............................
Browser (WAP) ..........................
15
63
50
57
60
46
59
59
31
&
Calender .................................... 45
Call
accept/end ............................. 10
charges .................................. 39
holding ................................... 13
menu ..................................... 14
not possible ............................. 8
reject ...................................... 12
several simultaneously .......... 12
Call back .................................... 11
Call divert ................................... 40
Call lists ..................................... 38
Call screening ............................ 57
Call to group .............................. 42
Call transfer ............................... 13
Calling faces .............................. 22
Calling symbol ........................... 22
Calls dialled (call list) .................. 38
Calls missed (call list) ................. 38
Calls received ............................ 38
Car kit (profiles) .......................... 53
Car kit accessories ..................... 66
Car solutions .............................. 75
CB services ................................ 36
Charge display ........................... 39
Charging (battery) ........................ 7
CLIPit™ Covers ...................... 1, 74
Clock .......................................... 49
Conceal ID ................................. 65
Conference ................................ 13
Confidential numbers ............ 9, 62
Connection (2nd phone number) 63
Connection, select ..................... 63
Contrast (display) ....................... 60
Control codes (DTMF) ......... 14, 21
'
Date, set ....................................
Display
big letters ...............................
contrast ..................................
settings ..................................
Display symbols .........................
Divert .........................................
DTMF tones ...............................
DTMF tones (control code)
store .......................................
49
60
60
59
68
40
14
21
(
E-mail via SMS ........................... 29
Emergency call ............................ 8
)
Factory settings ......................... 61
Fast access ................................ 55
Fast search (network) ................ 61
%!R
'
Favorites ....................................
Fax via SMS ...............................
Fax/data mode ...........................
Fontsize .....................................
54
29
67
31
*
Games ....................................... 51
Games (Battle Mail) ................... 50
Gehäuseschale .......................... 74
Getting started ............................ 6
Greeting ..................................... 60
+
Handset volume ........................
Headset .....................................
Holding a call .............................
Home network ..........................
61
36
57
10
30
.
Key lock ..................................... 60
Key tone .............................. 57, 60
/
Language (display) ..................... 59
Limit (charge) ............................. 39
Loss of phone, SIM card ........... 73
0
Mailbox ......................................
Maintenance of the phone ........
Melodies ....................................
Melody Manager .......................
Menu
control ...................................... 5
speed dialling ......................... 56
Message (SMS) ......................... 23
Microphone off .................... 14, 43
1
Network
fast search ............................. 61
settings .................................. 63
Notes ......................................... 47
2
12
66
13
63
,
IMEI number ..............................
Information services (CB) ..........
Information tones ......................
International prefix .....................
Internet (WAP) ...........................
:$
35
73
58
58
Outbox (SMS) ............................ 24
Own numbers ............................ 16
3
Phone identity number (IMEI) .... 61
Phone memory .......................... 20
Phonebook
call entry ................................ 18
group ...................................... 19
input aid ................................. 16
insert picture .......................... 22
new entry ............................... 16
store control code (DTMF) ..... 21
Phonecode ................................... 9
Picture & sound ......................... 26
PIN
ändern .................................... 62
change ..................................... 9
enter ........................................ 8
error ....................................... 71
PIN 2 ............................................ 9
Prefix ......................................... 10
Prevent new SIM ....................... 62
Profiles ....................................... 52
PUK .............................................. 9
%!R
#'
'
5
Record number ..........................
Redial .........................................
Reminder ...................................
Ringer
deactivate ..............................
setting ....................................
7
21
11
11
57
57
6
Safety precautions ....................... 3
SAR ........................................... 76
Second phone number .............. 63
Security ................................. 9, 62
Service centre ........................... 29
Siemens Service ........................ 72
Silent alert ................................. 57
SIM services .......................... 8, 37
SMS
capacity ............................ 24, 45
delivery confirmation ............. 24
insert picture .................... 25, 26
setup ...................................... 29
status report .......................... 29
T9 input ............................ 25, 47
to group ................................. 42
Soft keys
function .................................... 5
set .......................................... 55
SOS ............................................. 8
Special characters ............... 17, 27
Speech/fax ................................. 67
Speed dialling numbers ............. 56
Standby mode ............................. 8
Standby time ............................... 7
Swapping ................................... 12
Switching off phone .................... 8
automatically .......................... 49
Switching on phone ..................... 8
Symbols ..................................... 68
T9
activate, deactivate .......... 25, 47
text entry ............................... 27
Technical data ............................ 73
Text entry ............................ 17, 27
Text message ............................ 23
Text message (SMS) ................. 23
Time/charge ............................... 39
Time/date ................................... 49
Timezones ................................. 49
Topic list (CB) ............................. 36
Troubleshooting ......................... 69
8
Uppercase and lowercase ... 17, 27
User group (network) ................. 65
9
Validity period (SMS) ................. 29
Voice message .......................... 35
Volume (ringer) .......................... 57
:
WAP
Internet access ...................... 30
profiles ................................... 32
setup ...................................... 32