Canon HR10 Instruction manual Download

Transcript
• You can also use the T and W buttons
on the wireless controller or the LCD
panel. The zoom speed will be the same
as with the camcorder or fixed at
[
SPEED 3] (when [
VARIABLE] is
selected).
• When set to [
VARIABLE], the zoom
speed will be faster in record pause
mode.
then stays on when it enters the
standby mode.
2 When you wish to resume
recording, press QUICK START
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
NOTES
Quick Start Function
When you press QUICK START the
camcorder enters the
standby
mode. In standby mode the camcorder
consumes only about half the power
used when recording, saving energy
when you are using a battery pack.
Additionally, when you press
QUICK START again the camcorder is
ready to start recording within approx.
1 second, ensuring you do not miss
important shooting opportunities.
POINTS TO CHECK
(
26)
• When you wake up the camcorder from
standby mode, the following settings
will be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns
to automatic exposure.
- Zoom position returns to full wide
angle W.
• The camcorder will shut off if left in
standby mode for 10 minutes,
regardless of the [POWER SAVE] setting
(
52). You can select the length of
time until shut-off with the [ STANDBY
OFF] setting (
53).
To restore the power if the camcorder
shut off, slide the
switch toward
MODE and release it, or move the
switch to
and back to ON
again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
return to record pause mode.
- Open the disc compartment cover.
- Change the position of the
/
switch.
- Slide the
switch toward MODE.
QUICK START firmly.
The standby lamp flashes at first
while the camcorder is preparing and
1 Press
Downloaded From VideoCamera-Manual.com Manuals
39