1
Download Wolf ICBIF15/S Specifications
Transcript
INTERNATIONAL DESIGN GUIDE Contents Ovens and Warming Drawers . . . . . . . . . . . . . . . . . . 3 Cooktops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Ranges and Rangetops . . . . . . . . . . . . . . . . . . . . . . 42 Cooktop Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . 59 Pro Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Shipping Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Features and specifications are subject to change at any time without notice. Visit wolfappliance.com/specs for the most up-to-date information. Wolf Built-In Ovens 3 wolfappliance.com/specs E Series Ovens. The newest addition to the Wolf built-in oven family is a true partner, helping to create great meals with ease, as well as adding a striking design feature to the kitchen. Smart technology gives the E series 10 cooking modes, with Wolf’s innovative dual convection in single ovens and in the upper unit of double ovens. E series ovens can be installed flush with cabinets for a contemporary, integrated look. New black glass models with tubular handles are also available. KEY FEATURES E SERIES OVENS • Dual convection: two fans for even heat distribution. • Ten cooking modes, including the bake stone and dehydration kits for precise, easy-to-use control. • Self-cleaning ovens. • Full-extension bottom rack for easier access to foods. • Balanced door hinge system for smooth opening and closing of the door. ICBSO30-2U/S-TH ICBSO30-2B/G-TH UNFRAMED TUBULAR HANDLE BLACK GLASS TUBULAR HANDLE ICBDO30-2U/S-TH ICBDO30-2B/G-TH UNFRAMED TUBULAR HANDLE BLACK GLASS TUBULAR HANDLE Wolf Built-In Ovens 4 E Series Ovens 762 mm SINGLE OVENS 244 mm 25 mm* 76 mm 708 mm 225 mm CONDUIT CHANNEL 687 mm 718 mm 48 mm 759 mm 67 mm* 603 mm 603 mm BEHIND FRAME RIGHT SIDE VIEW OPEN OVEN DOOR 559 mm TOP VIEW *For black glass model, increase dimension by 6 mm. 759 mm 762 mm DOUBLE OVENS 244 mm 25 mm* 76 mm 1280 mm 225 mm CONDUIT CHANNEL 603 mm 1257 mm 718 mm 48 mm OPEN OVEN DOOR 759 mm 67 mm* 759 mm 603 mm BEHIND FRAME TOP VIEW RIGHT SIDE VIEW *For black glass model, increase dimension by 6 mm. Interior Specifications INTERIOR CAPACITY L 762 mm Oven INTERIOR DIMENSIONS 762 mm Oven 127 W H D 635 mm 419 mm 483 mm 559 mm Wolf Built-In Ovens 5 wolfappliance.com/specs Planning Information STANDARD INSTALLATION E SERIES SINGLE OVENS For ease of installation, Wolf recommends using 838 mm wide cabinets with 762 mm ovens. You will need a minimum 610 mm of usable cabinet depth. The cabinet must be able to support 113 kg for a single oven and 181 kg for a double oven. Required power supply: Single phase: 220-240V AC; 50/60 Hz 3phase: 380-415V AC; 50/60 Hz The oven has a face trim on all four sides and will overlap stiles and rails. Refer to the chart for overlap dimensions. Oven Trim Overlap OVEN TRIM Top Overlap Bottom Overlap Side Overlap Maximum connected load: Single phase: 4.4 kW 3phase: 4.4 kW Total amps: Single phase: 19 amps 3phase: 19 amps E SERIES 16 mm 3 mm 19 mm FLUSH INSET INSTALLATION A flush inset installation requires the oven to be recessed into the cabinet. A minimum 635 mm deep cabinet is needed if you want the front of the oven to be flush with surrounding cabinetry. E SERIES DOUBLE OVENS Required power supply: Single phase: 220-240V AC; 50/60 Hz 3phase: 380-415V AC; 50/60 Hz Maximum connected load: Single phase: 7.4 kW 3phase: 5.1 kW Total amps: Single phase: 32 amps 3phase: 22 amps Electrical Requirements IMPORTANT NOTE: Be aware of local codes and ordinances when installing your service. The single and double ovens require a separate, grounded 220-240 V AC, 50/60 Hz power supply and uses the power inlet box. Refer to the illustration below. Total amps for single ovens is 21 and for double ovens, 37. Refer to the wiring diagram showing the connections for each lead to the terminal box on the unit. ˜ 3N ˜ L1 L1 L2 L3 N N Single phase wiring diagram. 3phase wiring diagram. Wolf Built-In Ovens 6 762 mm E Series Single Oven STANDARD INSTALLATION DIMENSION WILL VARY* 610 mm min OPENING DEPTH 127 E mm 102 mm 691 mm OPENING HEIGHT E 724 mm 914 mm OPENING WIDTH FLOOR TO COUNTERTOP 121 mm TYPICAL* SIDE VIEW FRONT VIEW *Dimension must accommodate height of oven trim. NOTE: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. 762 mm E Series Double Oven STANDARD INSTALLATION E 610 mm min OPENING DEPTH 1260 mm 724 mm OPENING HEIGHT OPENING WIDTH 1702 mm TYPICAL* 102 mm 127 E mm E E SIDE VIEW FRONT VIEW *Dimension must accommodate height of oven trim. NOTE: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. Wolf Built-In Ovens 7 wolfappliance.com/specs 762 mm E Series Single Oven FLUSH INSET INSTALLATION TOP VIEW 629 mm min* FLUSH INSET DEPTH 25 mm SIDE CLEATS 635 mm min CABINET DEPTH 772 mm min FLUSH INSET WIDTH 22 mm TOP CLEAT 691 mm OPENING HEIGHT 724 mm min FLUSH INSET HEIGHT 724 mm OPENING WIDTH 25 mm 102 mm 11 mm PLATFORM 127 mm E E SIDE VIEW *For black glass model, increase dimension by 6 mm. NOTE: Platform must support 113 kg. Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. FRONT VIEW SIDE CLEATS E Wolf Built-In Ovens 8 762 mm E Series Double Oven FLUSH INSET INSTALLATION TOP VIEW 629 mm min* FLUSH INSET DEPTH 25 mm SIDE CLEATS 635 mm min CABINET DEPTH 772 mm min FLUSH INSET WIDTH 22 mm TOP CLEAT 1260 mm 1294 mm min 724 mm OPENING HEIGHT FLUSH INSET HEIGHT OPENING WIDTH 25 mm SIDE CLEATS 1702 mm TYPICAL 102 mm 11 mm PLATFORM 127 mm E E SIDE VIEW *For black glass model, increase dimension by 6 mm. NOTE: Platform must support 181 kg. Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. FRONT VIEW E Wolf Microwave Ovens 9 wolfappliance.com/specs Microwave Ovens. Taking the experience we’ve gained from our microwave ovens and combining that with the expertise of convection, Wolf has brought the best of both cooking technologies together in one unit. Aside from looking beautiful whether you use it in conjunction with an oven or not, the unit offers you all the performance you expect from Wolf—a cooking company with a heritage of nearly 75 years in the kitchen. KEY FEATURES CONVECTION MICROWAVE WITH GRILL • Built-in convection microwave oven with 40 L capacity • 230 V model output power—microwave 900W, grill 1300W and convection 1450W • 240 V model output power—microwave 900W, grill 1400W and convection 1400W • 762 mm trim allows microwave to be built in to fit above a Wolf built-in oven • Classic stainless steel trim • 5 auto-cook settings • Multiple language settings • Energy save mode • 10 convection temperature settings • 5 cook settings • Removable 362 mm turntable and turntable support • Removable low rack for broiling and removable high rack for baking • Oven door with window • Multiple rack baking • Safety door latches—oven will not operate unless the door is closed • Oven light comes on when oven is operating or door is open • Tight door seals • Rear ventilation openings ICBMW30-230 ICBMW30-240 Wolf Microwave Ovens 10 Planning Information Specifications on the following page provide overall dimensions, rough openings and installation options for the convection microwave oven. We have minimized the information contained in the illustrations, concentrating on the critical information you need to plan your installation. Interior Specifications INTERIOR CAPACITY Convection Microwave with Grill L 40 ELECTRICAL REQUIREMENTS Connect the appliance to a single phase 230-240 V/50 Hz alternating current via a correctly installed earth socket. The socket must be fused with a 16 A fuse. Wolf Microwave Ovens 11 wolfappliance.com/specs Convection Microwave with Grill OVERALL DIMENSIONS 762 mm 537 mm 462 mm BUILT-IN INSTALLATION 730 mm OPENING WIDTH 450 mm OPENING HEIGHT 914 mm FLOOR TO COUNTERTOP E 610 mm OPENING DEPTH SIDE VIEW Dashed line represents profile of unit. FRONT VIEW Wolf Warming Drawers 12 Warming Drawers. Wolf warming drawers are designed to take care of prepared foods until it’s time to serve them. You can adjust the temperature, keeping moist foods moist and crisp foods crisp. Warming drawers are ideal for proofing dough. Stainless steel drawer fronts are available to match the look of Wolf E series built-in ovens and sealed burner rangetops. The integrated drawer front allows for a custom wood panel and handle. Model ICBWWD30, approved for outdoor installations, is ideal for any outdoor kitchen. KEY FEATURES STAINLESS STEEL DRAWER FRONTS • 850-watt heating element with temperature control range of 26°C to 93°C. E SERIES • Spacious 43.5 L interior capacity. • Preset, four-hour automatic shutoff. • Hidden electronic touch controls for sleek appearance. UNFRAMED TUBULAR HANDLE PRO SERIES • Ball-bearing drawer glides for smooth, full extension. • UL approved for warming towels. 25 mm THICK • Accessory six-piece container set available. INTEGRATED CUSTOM PANEL 51 mm THICK 51 mm THICK 914 mm WIDE Wolf Warming Drawers 13 wolfappliance.com/specs Warming Drawer Front Wolf stainless steel and integrated drawer fronts allow for many design options, but the warming drawer itself will be the same for all applications. OVERALL DIMENSIONS A When installing a Wolf warming drawer in combination with an E series built-in oven, you may choose the stainless steel drawer front to match the trim and handle of your oven. The pro series 51 mm thick drawer front with pro handle is designed to be installed below a sealed burner rangetop, so the panel aligns properly with the front of the rangetop. 264 mm 229 mm 19 mm 759 mm mm B 578 mm OR 911 718 mm 19 mm Keep in mind, overall dimensions for the warming drawer remain the same, even though the drawer front may be wider to match a Wolf 914 mm wide sealed burner rangetop. 546 mm B Stainless Steel Drawer Front E SERIES Tubular Handle PRO SERIES 25 mm Thick / Pro Handle 51 mm Thick / Pro Handle A B 29 mm 89 mm A B 29 mm 54 mm 89 mm 114 mm Dimensions may vary ± 3 mm. Integrated Drawer Front CUSTOM PANEL Typical Minimum W H D 759 mm 746 mm 264 mm 254 mm 19 mm 19 mm RECESS Overlay* Flush Inset 5 mm thickness of custom panel + 5 mm *Cabinet face may need to be recessed to conceal warming drawer face frame. Wolf Warming Drawers 14 Planning Information The warming drawer must be installed with a Wolf stainless steel or integrated drawer front available through your Wolf dealer. For local distributor information, visit the international section of our website, wolfappliance.com. Specific installation instructions are included with the drawer front. For all installations, the warming drawer must be fully enclosed, top and bottom. The warming drawer platform must be able to support 91 kg. The platform must be a minimum of 25 mm above the toe kick to allow for the warming drawer trim which overlaps 16 mm on all four sides. The warming drawer with E series or pro series 25 mm thick front panel can be installed in a standard or flush inset application. For a standard installation, the drawer front sits proud of the cabinet face frame. A flush inset installation requires the drawer front to be recessed to be flush with surrounding cabinetry. Refer to the illustrations on the following pages for minimum cabinet dimensions for your specific installation. ELECTRICAL REQUIREMENTS The warming drawer requires a separate, grounded 220-240 V AC, 50/60 Hz power supply. The service should have a grounded 3-prong receptacle located within reach of the power cord and flush with the back wall. Total amps for warming drawers is 4. Wolf Warming Drawers 15 wolfappliance.com/specs E Series, Pro Series or Integrated Drawer Front STANDARD INSTALLATION 51 mm x 51 mm ANTI-TIP BLOCK 232 mm OPENING HEIGHT DIMENSION WILL VARY* 264 mm 727 mm OPENING WIDTH E PLATFORM 610 mm min 914 mm 597 mm FLOOR TO COUNTERTOP TYPICAL CABINET DEPTH SIDE VIEW FRONT VIEW *Dimension must accommodate height of anti-tip block and drawer face overlap. NOTE: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. 51 mm Pro Series Drawer Front STANDARD INSTALLATION WITH SEALED BURNER RANGETOP COOKING SURFACE 914 mm 19 mm PLATFORM 216 mm 232 mm OPENING HEIGHT 191 mm PLATFORM 264 mm 914 mm 610 mm min RANGETOP OPENING WIDTH 727 mm WARMING DRAWER OPENING WIDTH E PLATFORM FLOOR TO COUNTERTOP CABINET DEPTH SIDE VIEW FRONT VIEW NOTE: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. Wolf Warming Drawers 16 E Series, Pro Series or Integrated Drawer Front FLUSH INSET INSTALLATION TOP VIEW 25 mm 610 mm min FLUSH INSET DEPTH SIDE CLEATS 51 mm x 51 mm ANTI-TIP BLOCK 232 mm OPENING HEIGHT DIMENSION WILL VARY* 22 mm TOP AND SIDE CLEATS 727 mm 276 mm FLUSH INSET HEIGHT OPENING WIDTH 22 mm PLATFORM 610 mm min 914 mm 597 mm 772 mm FLOOR TO COUNTERTOP TYPICAL FLUSH INSET WIDTH E E CABINET DEPTH SIDE VIEW FRONT VIEW *Dimension must accommodate height of anti-tip block and drawer face overlap. NOTE: Location of electrical supply within opening may require additional cabinet depth. Dashed line represents profile of unit. Wolf Induction Cooktops 17 wolfappliance.com/specs Induction Cooktops. Ultrafast. Exceptionally energy efficient. Induction cooking has been popular among European chefs and homeowners for decades. Its secret is magnetism. Electromagnetic elements cause iron and magnetic stainless cookware to heat up instantly and with perfectly distributed heat. Heat generation stops the instant you turn off the element or remove the pan. The cooktop’s surface remains cool. Your kitchen stays cooler too. Framed induction cooktops have stainless steel trim. Unframed models have no trim and can be mounted flush with the countertop. KEY FEATURES INDUCTION COOKTOPS • Ceran glass-ceramic surface for scratch resistance and easy cleaning. • True simmer on select elements prevents scorching. • Melt setting on select elements for gentle heat. • Induction elements heat cookware, not the glass, for a cooler, safer cooking surface. ICBCT15I/S ICBCT30I/S ICBCT36I/S 381 mm FRAMED 762 mm FRAMED 914 mm FRAMED ICBCT30IU ICBCT36IU 762 mm UNFRAMED 914 mm UNFRAMED Wolf Induction Cooktops 18 Induction Cooktops 381 mm FRAMED 762 mm FRAMED 32 mm 914 mm 762 mm 381 mm 64 mm 22 mm ALL SIDES 533 mm 533 mm 533 mm CONDUIT 914 mm FRAMED CONDUIT 64 mm 22 mm 32 mm ALL SIDES 762 mm UNFRAMED CONDUIT 22 mm 32 mm ALL SIDES 914 mm UNFRAMED 533 mm 533 mm 914 mm 762 mm CONDUIT 32 mm Heating Zone Diameter and Power Watts 381 mm INDUCTION COOKTOP 220 mm 171 mm 1800 / 3000 boost 1200 762 mm INDUCTION COOKTOP 220 mm 171 mm 140 mm (2) 1800 / 3000 boost 1200 1200 914 mm INDUCTION COOKTOP 280 mm 220 mm 171 mm 140 mm 64 mm 3000 / 4000 boost (2) 1800 / 3000 boost 1200 1200 76 mm 22 mm ALL SIDES CONDUIT 32 mm 76 mm 22 mm ALL SIDES Wolf Electric Cooktops 19 wolfappliance.com/specs Electric Cooktops. Behind that sophisticated, minimalist exterior (available either with classic stainless steel trim or in our trimless design) there lurks a high-performance cooking instrument fairly begging to be put through its paces. All the elements feature a true simmer setting that hold sauces and stews below the boiling point. One element includes an even lower one-touch melt setting. The 762 mm and 914 mm electric cooktops are available in unframed and framed models, with the framed models offered in all three stainless steel trims. Unframed models can be mounted flush with the countertop. KEY FEATURES ELECTRIC COOKTOPS • Ceran glass-ceramic surface for scratch resistance and easy cleaning. • True simmer on select elements prevents scorching. • Melt setting on select elements for gentle heat. • Dual and triple heating zones to customize heat for pans of all sizes. ICBCT15E/S ICBCT30E/S ICBCT36E/S 381 mm FRAMED 762 mm FRAMED 914 mm FRAMED • High-frequency pulsation technology for more even heating. • Bridge-zone element to create a larger cooking area. ICBCT30EU ICBCT36EU 762 mm UNFRAMED 914 mm UNFRAMED Wolf Electric Cooktops 20 Electric Cooktops 381 mm FRAMED 762 mm FRAMED 914 mm FRAMED 533 mm 533 mm 533 mm 914 mm 762 mm 381 mm 96 mm 96 mm 96 mm 22 mm 22 mm 22 mm ALL SIDES ALL SIDES ALL SIDES 762 mm UNFRAMED 914 mm UNFRAMED 533 mm 533 mm 914 mm 762 mm 108 mm Maximum Element Power Watts 381 mm ELECTRIC COOKTOP 254 mm Triple 165 mm Single 900 / 1800 / 2500 1200 762 mm ELECTRIC COOKTOP 254 mm Triple (2) 203 mm Single 165 mm Single Singles with Bridge—203 mm x 432 mm 900 / 1800 / 2500 1800 1200 4400 914 mm ELECTRIC COOKTOP 305 mm Triple 1050 / 2200 / 2700 229 mm Dual 700 / 2200 (2) 203 mm Single 1800 165 mm Single 1200 Singles with Bridge—203 mm x 432 mm 4400 108 mm 22 mm 22 mm ALL SIDES ALL SIDES Wolf Induction and Electric Cooktops 21 wolfappliance.com/specs Planning Information For ease of installation, Wolf recommends using 838 mm wide cabinets with 762 mm cooktops and 991 mm cabinets with 914 mm cooktops. A minimum height clearance of 159 mm is required from the top of the countertop and any combustible surface directly below the cooktop. Unframed induction and electric cooktops can be mounted flush with the top of the countertop or as a frameless installation sitting on top of the countertop surface. In either installation the cooktop cut-out dimensions are the same. If the cooktop is to be mounted flush with the countertop, a recessed area surrounding the cooktop cut-out must be provided. Wolf downdraft systems cannot be used with unframed induction and electric cooktops. IMPORTANT NOTE: Flush mount installations are intended for granite, solid surface or stone countertop surfaces only. Wolf Induction and Electric Cooktops 22 Induction Cooktop Electrical Requirements IMPORTANT NOTE: Be aware of local codes and ordinances when installing your service. 914 mm INDUCTION COOKTOPS 381 mm INDUCTION COOKTOPS Required power supply: Single phase: 220-240V AC; 50/60 Hz 3phase: 380-410V AC; 50/60 Hz Required power supply: Single phase: 220-240V AC; 50/60 Hz 3phase: 380-410V AC; 50/60 Hz Maximum connected load: Single phase: 11.2 kW 3phase: 4 kW Maximum connected load: Single phase: 3.6 kW 3phase: 3.6 kW Total amps: Single phase: 49 amps 3phase: 18 amps Total amps: Single phase: 16 amps 3phase: 16 amps Refer to the wiring diagram showing the connections for each lead to the terminal box on the unit. 762 mm INDUCTION COOKTOPS Required power supply: Single phase: 220-240V AC; 50/60 Hz 3phase: 380-410V AC; 50/60 Hz Maximum connected load: Single phase: 7.2 kW 3phase: 3.6 kW ˜ 3N ˜ L1 L1 L2 L3 N N Total amps: Single phase: 32 amps 3phase: 16 amps Single phase wiring diagram. 3phase wiring diagram. Wolf Induction and Electric Cooktops 23 wolfappliance.com/specs Electric Cooktop Electrical Requirements IMPORTANT NOTE: Be aware of local codes and ordinances when installing your service. 381 mm ELECTRIC COOKTOPS Required power supply: Single phase: 220-240V AC; 50/60 Hz Maximum connected load: Single phase: 3.7 kW Total amps: Single phase: 16 amps 914 mm ELECTRIC COOKTOPS Required power supply: Single phase: 220-240V AC; 50/60 Hz Maximum connected load: Single phase: 10.5 kW Total amps: Single phase: 46 amps Refer to the wiring diagram showing the connections for each lead to the terminal box on the unit. 762 mm ELECTRIC COOKTOPS Required power supply: Single phase: 220-240V AC; 50/60 Hz ˜ L1 Maximum connected load: Single phase: 8.1 kW Total amps: Single phase: 35 amps N Single phase wiring diagram. Wolf Induction and Electric Cooktops 24 381 mm Framed Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm* 51 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 457 mm min 51 mm TO COMBUSTIBLE* 114 mm 914 mm E FLOOR TO COUNTERTOP 381 mm 381 mm *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Application shown allows for installation of two 381 mm modules side by side. 340 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT 64 mm min COUNTERTOP CUT-OUT Wolf Induction and Electric Cooktops 25 wolfappliance.com/specs 762 mm Framed Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm TO COMBUSTIBLE* 51 mm* 457 mm min 51 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 114 mm E 89 mm 254 mm 914 mm FLOOR TO COUNTERTOP 762 mm OVEN OPENING *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Electrical location applies only to installation with built-in oven. 721 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT COUNTERTOP CUT-OUT 64 mm min Wolf Induction and Electric Cooktops 26 914 mm Framed Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm TO COMBUSTIBLE* 51 mm* 457 mm min 51 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 114 mm 89 mm E 254 mm 914 mm FLOOR TO COUNTERTOP 914 mm OVEN OPENING *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Electrical location applies only to installation with built-in oven. 873 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT COUNTERTOP CUT-OUT 64 mm min Wolf Induction and Electric Cooktops 27 wolfappliance.com/specs 762 mm Unframed Cooktop FLUSH INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm TO COMBUSTIBLE* 51 mm* 457 mm min 51 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 114 mm E 89 mm 254 mm 914 mm FLOOR TO COUNTERTOP 762 mm OVEN OPENING *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Electrical location applies only to installation with built-in oven. 765 mm RECESS FOR FLUSH INSTALLATION 33 mm 721 mm RADIUS CUT-OUT WIDTH COUNTERTOP PROFILE 22 mm max 537 mm 11 mm RADIUS RECESS FOR FLUSH INSTALLATION 8 mm CUT-OUT DEPTH FRONT 62 mm min 40 mm RECESS FOR FLUSH INSTALLATION 492 mm COUNTERTOP CUT-OUT Wolf Induction and Electric Cooktops 28 914 mm Unframed Cooktop FLUSH INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm TO COMBUSTIBLE* 51 mm* 457 mm min 51 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 114 mm E 89 mm 254 mm 914 mm FLOOR TO COUNTERTOP 914 mm OVEN OPENING *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Electrical location applies only to installation with built-in oven. 918 mm RECESS FOR FLUSH INSTALLATION 33 mm 873 mm RADIUS CUT-OUT WIDTH COUNTERTOP PROFILE 22 mm max 537 mm 11 mm RADIUS RECESS FOR FLUSH INSTALLATION 8 mm CUT-OUT DEPTH FRONT 62 mm min 40 mm RECESS FOR FLUSH INSTALLATION 492 mm COUNTERTOP CUT-OUT Wolf Gas Cooktops 29 wolfappliance.com/specs Gas Cooktops. Just looking at a Wolf gas cooktop can make your heart beat faster. Then, use it just once, and feel the real passion ignite. Dual-stacked, sealed burners place infinite control in your hands—from highest searing heat to the merest breath of flame. This latter precision feature we call true simmer. Pasta sauce or fish stew can simmer for hours without boiling or scorching. Sealed burners make sloshes and spills a snap to clean up. Gas cooktops are offered in classic stainless steel. All models can be ordered as natural or LP gas. KEY FEATURES GAS COOKTOPS • Dual-stacked, sealed burners for precise control and easy cleanup. • Flame recognition and automatic reignition for safety and ease of use. • kW from .1 to 4.9 for tasks from melting to searing (3.8 kW on a 381 mm gas cooktop). • True simmer setting on all burners prevents scorching. • Illuminated, cool-to-touch knobs for user-friendly comfort. ICBCT15G/S ICBCT30G/S ICBCT36G/S 381 mm 762 mm 914 mm Wolf Gas Cooktops 30 Gas Cooktops 381 mm COOKTOP 762 mm COOKTOP 533 mm 381 mm 914 mm COOKTOP 533 mm 533 mm 914 mm 762 mm 102 mm 102 mm 102 mm 22 mm 22 mm 22 mm ALL SIDES ALL SIDES ALL SIDES Wolf Gas Cooktops 31 wolfappliance.com/specs Planning Information For ease of installation, Wolf recommends using 838 mm wide cabinets with 762 mm gas cooktops and 991 mm cabinets with 914 mm cooktops. Burner Rating 381 mm GAS COOKTOP Medium Small 762 mm GAS COOKTOP Large Medium (2) Small 914 mm GAS COOKTOP Large Medium (3) Small kW kW HIGH SIMMER 3.8 3.0 .2 .1 HIGH SIMMER 4.9 3.8 3.0 .2 .2 .1 HIGH SIMMER 4.9 3.8 3.0 .2 .2 .1 ELECTRICAL AND GAS REQUIREMENTS Gas cooktops require a separate, grounded 220-240 V AC, 50/60 Hz power supply. The service should have a grounded 3-prong receptacle located within reach of the 1.8 m power cord. Total amps for gas cooktops is less than one. A gas supply line of 19 mm rigid pipe must be provided to the cooktop. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the cooktop to the gas supply line. Wolf gas cooktops are designed to operate on natural gas at 20 mb pressure or LP gas at 37 mb pressure. Wolf Gas Cooktops 32 381 mm Gas Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 64 mm* 178 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 457 mm min 178 mm TO COMBUSTIBLE* 102 mm 914 mm FLOOR TO COUNTERTOP LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR G E 381 mm 381 mm 127 mm *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Application shown allows for installation of two 381 mm modules side by side. 356 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT 64 mm min COUNTERTOP CUT-OUT Wolf Gas Cooktops 33 wolfappliance.com/specs 762 mm Gas Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 229 mm TO COMBUSTIBLE* 64 mm* 457 mm min 229 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 102 mm 89 mm G E 254 mm 914 mm FLOOR TO COUNTERTOP 762 mm OVEN OPENING *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Gas and electrical location applies only to installation with built-in oven. 737 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT COUNTERTOP CUT-OUT 64 mm min Wolf Gas Cooktops 34 914 mm Gas Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 229 mm TO COMBUSTIBLE* 64 mm* 457 mm min 229 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 102 mm 89 mm G E 254 mm 914 mm FLOOR TO COUNTERTOP 914 mm OVEN OPENING *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Gas and electrical location applies only to installation with built-in oven. 889 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT COUNTERTOP CUT-OUT 64 mm min Wolf Integrated Modules 35 wolfappliance.com/specs Integrated Modules. Passion for cooking reaches new dimensions with our 15-inch integrated modules. Seven models cover the gamut of cooking methods, from searing to deep frying to induction. Combine modules à la carte–style to create a truly custom cooktop. Turn any countertop into a cooking area. Even add specialty functions alongside an existing cooktop or range. Low-profile grates, dual-stacked burners, deep spill pans and illuminated controls allow these modules to integrate perfectly with their larger counterparts and deliver equal performance. Integrated modules are crafted of stainless steel or have stainless steel trim. KEY FEATURES INTEGRATED MODULES • Induction cooktop: Iron and other magnetic cookware heat instantly, while the cooktop surface stays cool. • Electric cooktop: Elements operate with highfrequency pulsation technology for consistent heating. • Electric grill: Dual elements ensure precise control in front and rear zones for year-round grilling. ICBCT15I/S ICBCT15E/S ICBIG15/S ICBIS15/S INDUCTION COOKTOP ELECTRIC COOKTOP ELECTRIC GRILL ELECTRIC STEAMER ICBIF15/S ICBCT15G/S ICBIM15/S ELECTRIC FRYER GAS COOKTOP MULTI-FUNCTION COOKTOP • Electric steamer: Powerful heating element steam cooks meats, vegetables and grains beautifully. • Electric fryer: Fried foods emerge crisp and light, due to precise temperature control. • Gas cooktop: Equipped with the same dual-stacked burners as our larger cooktops. • Multi-function cooktop: High-output burner concentrates its flame in precisely the right spot for stir-frying. Wolf Integrated Modules 36 Integrated Modules INDUCTION COOKTOP ELECTRIC COOKTOP 533 mm 32 mm 64 mm 96 mm 22 mm 22 mm ALL SIDES 533 mm 381 mm 381 mm ALL SIDES ELECTRIC STEAMER 533 mm 533 mm 381 mm 381 mm CONDUIT ELECTRIC GRILL 159 mm 13 mm 25 SIDES mm FRONT / BACK 191 mm 152 mm DRAIN OUTLET 13 mm SIDES 25 mm FRONT / BACK ELECTRIC FRYER GAS COOKTOP 533 mm 533 mm 381 mm 381 mm DRAIN OUTLET 22 mm ALL SIDES 13 mm SIDES 25 mm FRONT / BACK 533 mm 381 mm 102 mm 191 mm 152 mm MULTI-FUNCTION COOKTOP 127 mm 13 mm SIDES 25 mm FRONT / BACK Wolf Integrated Modules 37 wolfappliance.com/specs Planning Information When multiple cooktops or modules are installed side by side, the dimensions provided in the chart are derived by adding 32 mm additional space for each additional unit, to give you the total countertop cut-out width. Dimensions include the optional filler strip available through your Wolf dealer. For local distributor information, visit the international section of our website, wolfappliance.com. Refer to specifications on the following pages for specific installation requirements and limitations for each integrated module. Review specific installation instructions for product-to-product capabilities. Installation specifications for the induction and electric cooktops can be found on page 24 and for the gas cooktop on page 32. IMPORTANT NOTE: Wolf does not recommend the use of downdraft ventilation with the grill, steamer or fryer modules. Multiple Cooktops COUNTERTOP CUT-OUT WIDTH 2 Modules 3 Modules 4 Modules 762 mm Cooktop / Module 762 mm Cooktop / 2 Modules 914 mm Cooktop / Module 743 mm 1130 mm 1518 mm 1124 mm 1511 mm 1276 mm CUT-OUT WIDTH 356 mm 64 mm min 489 mm MODULE CUT-OUT WIDTH CUT-OUT DEPTH FRONT OF COUNTERTOP Countertop cut-out. ELECTRICAL REQUIREMENTS Wolf electric modules require a separate, grounded 3-wire 220-240 V AC, 50/60 Hz power supply. Gas modules require a separate, grounded 220-240 V AC, 50/60 Hz power supply and a grounded 3-prong receptacle located within reach of the 1.8 m power cord. Total amps for the electric cooktop is 16. Total amps for the electric grill, steamer and fryer is 12. Total amps for gas and multifunction cooktops is less than one. When multiple cooktops or modules are installed side by side, each unit must have its own separate electrical supply. GAS REQUIREMENTS A gas supply line of 19 mm rigid pipe must be provided to the gas module. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the module to the gas supply line. When multiple gas cooktops or modules are installed next to one another, they can receive their gas supply from a common line. Wolf gas modules are designed to operate on natural gas at 20 mb pressure or LP gas at 37 mb pressure. Wolf Integrated Modules 38 Electric Grill STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm* 178 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 457 mm min 178 mm TO COMBUSTIBLE* 159 mm 914 mm E FLOOR TO COUNTERTOP 381 mm 381 mm *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Application shown allows for installation of two 381 mm modules side by side. 356 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT 64 mm min COUNTERTOP CUT-OUT Wolf Integrated Modules 39 wolfappliance.com/specs Electric Steamer STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm* 178 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW DRAIN OUTLET 178 mm TO COMBUSTIBLE* 343 mm 314 mm 314 mm 194 mm 914 mm 457 mm min 152 mm DRAIN OUTLET FLOOR TO COUNTERTOP E 381 mm 381 mm *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Application shown allows for installation of two 381 mm modules side by side. 356 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT 64 mm min COUNTERTOP CUT-OUT DRAIN CONNECTION OPTIONS The 16 mm outlet from the steamer valve will accept a drain hose that must flow downward to, and tie into, an existing sink drain. A separate drain with a freefall may also be installed, or a heat-resistant receptacle may be placed under the drain outlet for drainage. The steamer module must be installed at least 381 mm from a Wolf fryer module. Contact between water and hot oil may cause burns from steam and hot oil. Wolf Integrated Modules 40 Electric Fryer STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 51 mm* 178 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW DRAIN OUTLET 178 mm TO COMBUSTIBLE* 343 mm 314 mm 314 mm 194 mm 914 mm 457 mm min 152 mm DRAIN OUTLET FLOOR TO COUNTERTOP E 381 mm 381 mm *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Fryer module must be installed in base cabinet with access to valve at bottom of unit to drain oil into heat-resistant receptacle. Application shown allows for installation of two 381 mm modules side by side. 356 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT 64 mm min COUNTERTOP CUT-OUT DRAIN CONNECTION The fryer module must be installed in a base cabinet with access to the manual valve at the bottom of the unit to drain oil into a heat-resistant receptacle. The fryer module must be installed at least 381 mm from any open-flame cooking device or a Wolf steamer module. The open flame may cause ignition of oil, and contact between water and hot oil may cause burns. Wolf Integrated Modules 41 wolfappliance.com/specs Multi-Function Cooktop STANDARD INSTALLATION SIDE CABINET 762 mm min COUNTERTOP TO COMBUSTIBLE MATERIALS 330 mm max 64 mm* 178 mm TO COMBUSTIBLE* SEE COUNTERTOP CUT-OUT BELOW 457 mm min 178 mm TO COMBUSTIBLE* 102 mm 914 mm FLOOR TO COUNTERTOP LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR G E 381 mm 381 mm 127 mm *Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop. NOTE: Application shown allows for installation of two 381 mm modules side by side. 356 mm CUT-OUT WIDTH 489 mm CUT-OUT DEPTH FRONT 64 mm min COUNTERTOP CUT-OUT Wolf Dual Fuel Ranges 42 Dual Fuel Ranges. Discover a new world of cooking—the best of two worlds, actually—with a Wolf dual fuel range. Topside, gas cooking in all its glory, with the fine control of dual-stacked, sealed burners and options that include the remarkable French top. Below, that marvel of culinary technology, the Wolf convection electric oven. Its two fans and four heating elements let you select from 10 cooking modes so you can choose the one precisely suited to the dish you’re preparing. Ovens are self-cleaning. With a variety of range widths to choose from, kitchens large and small become gateways to the exciting new world of dual fuel cooking. All models have the classic stainless steel finish and can be ordered in natural or LP gas. KEY FEATURES CONFIGURATIONS 762 mm 914 mm 1219 mm 1527 mm ICBDF304 ICBDF366 ICBDF486C ICBDF606CG ICBDF364C ICBDF486G ICBDF604CF ICBDF364G ICBDF484CG • Dual-stacked, sealed burners for precise control and easy cleanup. • Patented digital oven control knob. • Dual convection: two fans for even heat distribution. • Ten cooking modes, including the bake stone and dehydration kits for precise, easy-to-use control. • Flame recognition and automatic reignition for safety and ease of use. • Full-extension bottom rack for easier access to foods. • Spring and damper door hinge for quiet, effortless opening and closing. ICBDF484F Wolf Dual Fuel Ranges 43 wolfappliance.com/specs Dual Fuel Ranges 762 mm RANGE 914 mm RANGE 1219 mm RANGE 937 mm 937 mm 937 mm HEIGHT TO COOKING SURFACE* HEIGHT TO COOKING SURFACE* HEIGHT TO COOKING SURFACE* 911 mm 759 mm 1216 mm 749 mm 699 mm 235 mm 1527 mm RANGE 1419 mm 508 mm RISER 613 mm 937 mm HEIGHT TO COOKING SURFACE* 1527 mm 911 mm 1165 mm 254 mm RISER 635 mm 664 mm 1035 mm 127 mm RISER 1194 mm *LEGS AND CASTERS ALLOW FOR HEIGHT ADJUSTMENT UP TO 991 mm SIDE VIEW—ALL RANGES Wolf Dual Fuel Ranges 44 Planning Information Available in four widths, Wolf dual fuel ranges are designed to fit a 762 mm, 914 mm, 1219 mm or 1530 mm opening. IMPORTANT NOTE: When installing against a combustible surface, a minimum 254 mm riser is required for a 914 mm dual fuel range with charbroiler or griddle/teppan-yaki and all 1219 mm and 1524 mm models. Follow all minimum clearances to combustible surfaces shown in the installation illustration on the following page. It is recommended that you use a Wolf pro ventilation hood with the dual fuel range. If the range is to be installed without ventilation, a 914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials above the range is required. Refer to page 67 for pro ventilation. Wolf dual fuel ranges have a terminal block that allows for a 3-wire or 4-wire installation. A separate, grounded 220-240 V AC, 50/60 Hz electrical supply is required with its own circuit breaker. Maximum Connected Load DUAL FUEL RANGE 762 mm and 914 mm 1219 mm 1524 mm SINGLE PHASE 3PHASE 19 amps 35 amps 38 amps 18 amps 18 amps 18 amps A gas supply line of 19 mm rigid pipe must be provided to the range. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the range to the gas supply line. Wolf dual fuel ranges are designed to operate on natural gas at 20 mb pressure or LP gas at 37 mb pressure. Oven Specifications INTERIOR CAPACITY L 457 mm Oven 762 mm Oven 914 mm Oven 71 127 153 INTERIOR DIMENSIONS 457 mm Oven 762 mm Oven 914 mm Oven ELECTRICAL AND GAS REQUIREMENTS W H D 356 mm 635 mm 762 mm 419 mm 419 mm 419 mm 483 mm 483 mm 483 mm kW kW HIGH SIMMER 4.8 2.7 .3 .1 Burner Rating SURFACE BURNERS (3 or 5) Large (1) Small OPTIONAL FEATURES Infrared Charbroiler Infrared Griddle/Teppan-Yaki French Top NATURAL LP 5.6 5.6 4.8 5.15 5.15 4.0 Wolf Dual Fuel Ranges 45 wolfappliance.com/specs Installation 330 mm 457 mm 762 mm TO 914 mm TO BOTTOM OF VENTILATION HOOD* 152 mm W OPENING WIDTH 937 mm TO COOKING SURFACE LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 57 mm SIDE VIEW A 254 mm GAS G E 83 mm 330 mm FRONT VIEW ELECTRICAL *Without ventilation hood, 914 mm minimum clearance countertop to combustible materials, 118 mm for charbroiler. NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces, combustible materials cannot be located within this area. For island installation, 305 mm minimum clearance back of range to combustible rear wall above countertop. Dual Fuel Range WIDTH 762 mm Range 914 mm Range 1219 mm Range 1524 mm Range W A 762 mm 914 mm 1219 mm 1530 mm 216 mm 343 mm 610 mm 787 mm Wolf Sealed Burner Rangetops 46 Sealed Burner Rangetops. Wolf sealed burner rangetops incorporate all the gas cooking features of a Wolf dual fuel range. Customize your rangetop with your preferred combination of burners (from four to six), infrared griddle/teppan-yaki or charbroiler, or the remarkable French top. Compared with conventional electric elements, the infrared elements of the charbroiler and griddle/teppan-yaki are a revelation. They preheat almost instantly, distribute heat more evenly and deliver fast temperature recovery after food is placed on the surface. All sealed burner rangetop models have the classic stainless steel finish and can be ordered in natural or LP gas. KEY FEATURES CONFIGURATIONS 762 mm 914 mm 1219 mm ICBSRT304 ICBSRT364C ICBSRT486C ICBSRT364G ICBSRT486G • Dual-stacked, sealed burners for precise control and easy cleanup. • Optional configurations including: infrared charbroiler, griddle/teppan-yaki and French top. • Flame recognition and automatic reignition for safety and ease of use. • Signature red or black control knobs with infinite control. ICBSRT484CG ICBSRT484F Wolf Sealed Burner Rangetops 47 wolfappliance.com/specs Sealed Burner Rangetops 762 mm RANGETOP 216 mm TO COOKING SURFACE 759 mm 914 mm RANGETOP 216 mm TO COOKING SURFACE 911 mm 724 mm 699 mm 235 mm 508 mm RISER 1219 mm RANGETOP 216 mm TO COOKING SURFACE 1216 mm 445 318 mm mm 254 mm 127 mm RISER RISER 191 mm 616 mm SIDE VIEW—ALL RANGETOPS Wolf Sealed Burner Rangetops 48 Planning Information Available in three widths, Wolf sealed burner rangetops are designed to fit a 762 mm, 914 mm or 1219 mm opening. ELECTRICAL AND GAS REQUIREMENTS The platform must be able to support 91 kg for a 762 mm rangetop, 113 kg for a 914 mm rangetop and 136 kg for a 1219 mm rangetop. The platform must include a cut-out at the right rear for gas supply and electrical connections. IMPORTANT NOTE: When installing against a combustible surface, a minimum 254 mm riser is required for 914 mm and 1219 mm sealed burner rangetops with a charbroiler or griddle/teppan-yaki. Follow all minimum clearances to combustible surfaces shown in the installation illustrations on the following pages. It is recommended that you use a Wolf pro ventilation hood with the sealed burner rangetop. If the rangetop is to be installed without ventilation, a 914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials above the rangetop is required. Refer to page 67 for pro ventilation. A downdraft can be used with model ICBSRT304. An accessory trim kit is necessary for this installation. Contact your Wolf dealer for details. Burner Rating SURFACE BURNERS Large (1) Small OPTIONAL FEATURES Infrared Charbroiler Infrared Griddle/Teppan-Yaki French Top kW kW HIGH SIMMER 4.6 2.8 .9 .6 NATURAL LP 5.8 5.5 4.6 5.3 4.7 4.0 Wolf sealed burner rangetops require a 220-240 V AC, 50/60 Hz electrical supply to operate the electronic ignition system. The 1.8 m power cord is equipped with a 3-prong, grounded plug for protection against shock hazard. Total amps for sealed burner rangetops is less than one. A gas supply line of 19 mm rigid pipe must be provided to the rangetop. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the rangetop to the gas supply line. Wolf sealed burner rangetops are designed to operate on natural gas at 20 mb pressure or LP gas at 37 mb pressure. Wolf Sealed Burner Rangetops 49 wolfappliance.com/specs 762 mm Sealed Burner Rangetop INSTALLATION 330 mm 762 mm TO 914 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 191 mm 762 mm OPENING WIDTH 914 mm PLATFORM GAS AND ELECTRICAL THROUGH BOTTOM OF PLATFORM 406 mm OPENING HEIGHT FLOOR TO COUNTERTOP PLATFORM PLATFORM 102 TOP VIEW mm BACK WALL E G 406 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **914 mm minimum clearance from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of rangetop to combustible rear wall above countertop. Wolf Sealed Burner Rangetops 50 914 mm Sealed Burner Rangetop INSTALLATION 330 mm 762 mm TO 914 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 191 mm 914 mm OPENING WIDTH 914 mm PLATFORM GAS AND ELECTRICAL THROUGH BOTTOM OF PLATFORM 406 mm FLOOR TO COUNTERTOP OPENING HEIGHT PLATFORM PLATFORM 102 TOP VIEW mm BACK WALL E G 406 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of rangetop to combustible rear wall above countertop. Wolf Sealed Burner Rangetops 51 wolfappliance.com/specs 1219 mm Sealed Burner Rangetop INSTALLATION 330 mm 762 mm TO 914 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 191 mm 1219 mm OPENING WIDTH 914 mm PLATFORM GAS AND ELECTRICAL THROUGH BOTTOM OF PLATFORM 406 mm OPENING HEIGHT FLOOR TO COUNTERTOP PLATFORM 102 TOP VIEW mm BACK WALL E G 406 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of rangetop to combustible rear wall above countertop. PLATFORM Wolf Gas Ranges 52 Gas Ranges. More than seven decades in the crucible of restaurant kitchens have perfected the form, function and sheer durability of our gas ranges. These precision instruments are as noteworthy for their range of sizes and features as for their exhilarating performance. Standard features include an infrared broiler and convection baking. Dual brass burners go from extremely low flame for simmering to furnace-like 4.4 kW heat for searing. Options include infrared griddle/teppan-yaki and charbroiler. All gas ranges have the classic stainless steel finish and can be ordered in natural or LP gas. KEY FEATURES CONFIGURATIONS 762 mm 1219 mm 1527 mm ICBR304 ICBR486C ICBR606CG 914 mm ICBR486G ICBR364C ICBR484CG • Gas convection oven for even heat distribution. • Dual brass burners delivering .3 to 4.4 kW. • Infrared broiler with ultrafast preheating. • Flame recognition and automatic reignition for safety and ease of use. • Porcelain-coated, cast-iron grates for easy cleaning and durability. • Signature red or black control knobs with infinite control. ICBR364G Wolf Gas Ranges 53 wolfappliance.com/specs Gas Ranges 762 mm RANGE 914 mm RANGE 1219 mm RANGE 940 mm 940 mm 940 mm HEIGHT TO COOKING SURFACE HEIGHT TO COOKING SURFACE HEIGHT TO COOKING SURFACE 914 mm 762 mm 1219 mm 721 mm 692 mm 235 mm 1527 mm RANGE 1441 mm 508 mm RISER 1187 mm 940 mm 622 mm 914 mm HEIGHT TO COOKING SURFACE 1060 mm 127 mm RISER 64 mm 1524 mm 254 mm RISER 641 mm 1102 mm LEGS AND CASTERS ALLOW 25 mm HEIGHT ADJUSTMENT SIDE VIEW—ALL RANGES Wolf Gas Ranges 54 Planning Information Wolf gas ranges come in 762 mm, 914 mm, 1219 mm and 1524 mm widths. IMPORTANT NOTE: A minimum 127 mm riser is required when installing a gas range against a combustible surface. A minimum 254 mm riser is required when installing a gas range with a charbroiler or griddle/teppan-yaki against a combustible surface. Follow all minimum clearances to combustible surfaces shown in the installation illustrations on the following pages. It is recommended that you use a Wolf pro ventilation hood with the gas range. If the range is to be installed without ventilation, a 914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials above the range is required. Refer to page 67 for pro ventilation. Oven Specifications INTERIOR CAPACITY L 457 mm Oven 762 mm Oven 914 mm Oven 71 125 156 INTERIOR DIMENSIONS 457 mm Oven 762 mm Oven 914 mm Oven W H D 343 mm 610 mm 762 mm 473 mm 473 mm 473 mm 432 mm 432 mm 432 mm Burner Rating SURFACE BURNERS 4–6 Burners OPTIONAL FEATURES Infrared Charbroiler Infrared Griddle/Teppan-Yaki kW kW HIGH SIMMER 4.4 .3 NATURAL LP 4.2 5.3 4.2 5.3 5.8 7.8 4.6 5.8 7.8 4.6 OVEN BURNERS 457 mm Oven Burner 762/914 mm Oven Burner Infrared Broiler ELECTRICAL AND GAS REQUIREMENTS Wolf gas ranges require a 220-240 V AC, 50/60 Hz electrical supply to operate the electronic ignition system. The 1.8 m power cord is equipped with a 3-prong, grounded plug for protection against shock hazard. Total amps for gas ranges is less than one. A gas supply line of 19 mm rigid pipe must be provided to the range. If local codes permit, a certified, .9 m long, 13 mm or 19 mm ID flexible metal appliance connector is recommended to connect the range to the gas supply line. Wolf gas ranges are designed with a regulator that decreases the line pressure on natural gas at 12.5 mb pressure or LP gas at 25 mb pressure. The maximum gas supply pressure to the regulator should never exceed 100 mb. Wolf Gas Ranges 55 wolfappliance.com/specs 762 mm Gas Range INSTALLATION SIDE CABINET 330 mm 762 mm TO 914 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 768 mm 914 mm OPENING WIDTH FLOOR TO COUNTERTOP 254 mm 305 mm 146 mm E 197 mm 51 mm G 305 mm 940 mm TO COOKING SURFACE LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 127 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **914 mm minimum clearance from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of range to combustible rear wall above countertop. 76 mm Wolf Gas Ranges 56 914 mm Gas Range INSTALLATION SIDE CABINET 330 mm 762 mm TO 914 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 921 mm 914 mm OPENING WIDTH FLOOR TO COUNTERTOP 254 mm 305 mm 146 mm E 197 mm 940 mm TO COOKING SURFACE LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 51 mm G 305 mm 127 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of range to combustible rear wall above countertop. 76 mm Wolf Gas Ranges 57 wolfappliance.com/specs 1219 mm Gas Range INSTALLATION SIDE CABINET 330 mm 762 mm TO 914 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 1226 mm 914 mm OPENING WIDTH FLOOR TO COUNTERTOP 940 mm 660 mm TO COOKING SURFACE 305 mm 146 mm E 197 mm 51 mm G 305 mm LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 127 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **914 mm minimum clearance, 1118 mm for charbroiler, from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of range to combustible rear wall above countertop. 76 mm Wolf Gas Ranges 58 1527 mm Gas Range INSTALLATION SIDE CABINET 330 mm 762 mm TO 94 mm max TO BOTTOM OF VENTILATION HOOD** 457 mm min 152 mm TO COMBUSTIBLE* 152 mm TO COMBUSTIBLE* 254 mm 305 mm 146 mm E 1530 mm 914 mm OPENING WIDTH FLOOR TO COUNTERTOP 940 mm TO COOKING SURFACE LOCATION OF GAS AND ELECTRICAL EXTENDS ON FLOOR 51 mm 197 mm G 305 mm 127 mm *Minimum clearance from rough opening to combustible materials up to 457 mm above countertop. **1118 mm minimum clearance from countertop to combustible materials without ventilation hood. NOTE: For island installations, 305 mm minimum clearance from back of range to combustible rear wall above countertop. 76 mm Wolf Cooktop Ventilation 59 wolfappliance.com/specs Low-Profile Hoods. Behind the contemporary lines of the new cooktop low-profile hoods, there’s a lot of hard-nosed functional thinking. Brilliant halogen lighting illuminates your cooking surface. Powerful multi-speed blowers whisk away smoke and odors. Wall-mount and island hoods are available in the classic stainless steel finish with sleek black glass control panel. KEY FEATURES LOW-PROFILE HOODS • Internal or remote blower options. • Telescopic flue fits 8' to 9' ceilings. • Models with an internal blower can be used in a nonducted application with a recirculating filter. • Front-mounted controls with digital indicator. ICBCTEWH30I ICBCTEWH36(I) ICBCTEWH45(I) 762 mm WALL 914 mm WALL 1143 mm WALL • Heat sentry to automatically turn unit on when excessive heat is sensed. • Delay-off feature to automatically turn unit off. • Stainless steel filter cover with dishwasher-safe aluminum mesh filter. ICBCTEIH42I 1067 mm ISLAND Wolf Cooktop Ventilation 60 Low-Profile Hoods WALL HOODS 251 mm 276 mm 149 mm TO 467 mm 740 mm TO 511 mm 1054 mm 79 mm 451 mm 762 mm, 914 mm AND 1143 mm WIDTHS ISLAND HOOD 308 mm 276 mm 54 mm TO 394 mm 718 mm TO 1054 mm 581 mm 79 mm 1067 mm 549 mm Wolf Cooktop Ventilation 61 wolfappliance.com/specs Planning Information Wolf cooktop low-profile hoods are recommended for use with Wolf electric and gas cooktops and integrated modules. These hoods have a telescopic flue that allows you to reach a ceiling height of 2.4 m to 2.7 m with a finished look. Low-profile wall and island hoods are available with an internal blower. Wall hood models ICBCTEWH36 and ICBCTEWH45 will require a remote blower assembly, available through your Wolf dealer. For local distributor information, visit the international section of our website, wolfappliance.com. The blower will vary in size and is dictated by the cooking unit, the volume of air that needs to be moved and the length of the duct run. Refer to ventilation recommendations on pages 73–74. These hoods have an 203 mm round duct with vertical discharge. Cooktop low-profile hoods with an internal blower can be used in a non-ducted application with a recirculating filter. In this installation, kitchen air is purified through filters and returned as clean air into the room. A recirculation kit available through your Wolf dealer is required. Consult a qualified HVAC professional for specific installation and ducting applications. ELECTRICAL REQUIREMENTS Wolf low-profile wall and island hoods require a separate, grounded 220-240 V AC, 50/60 Hz power supply. Total amps for cooktop hoods is less than one. Wolf Cooktop Ventilation 62 Low-Profile Wall Hood INSTALLATION 740 mm TO E LOCATION OF ELECTRICAL 1054 mm HEIGHT OF HOOD 127 mm 381 mm 762 mm, 914 mm OR 1143 mm 451 mm DEPTH OF HOOD 2.4 m TO 2.7 m FLOOR TO CEILING HEIGHT WIDTH OF HOOD 610 mm TO 762 mm TO COUNTERTOP Wolf Cooktop Ventilation 63 wolfappliance.com/specs Low-Profile Island Hood INSTALLATION LOCATION OF ELECTRICAL THROUGH TOP OF HOOD 718 mm TO 1054 mm HEIGHT OF HOOD 549 mm 1067 mm DEPTH OF HOOD WIDTH OF HOOD 2.4 m TO 2.7 m FLOOR TO CEILING HEIGHT 610 mm TO 762 mm TO COUNTERTOP Wolf Cooktop Ventilation 64 Downdraft Ventilation. The cooktop downdraft unit rises from the countertop to whisk away odors and smoke into the easy-to-clean, five-layer mesh filter and can be lowered beneath the countertop when not in use. The control module and top cover are available in classic stainless steel for ease in matching your cooktop. KEY FEATURES DOWNDRAFTS • Internal or remote blower options. • Top cover and controls available in classic stainless steel. ICBDD30I / ICBDD30R ICBDD36I / ICBDD36R 762 mm 914 mm • Remote-mounted controls with LED indicators. • Delay-off feature to automatically turn unit off. • Stainless steel filter cover with dishwasher-safe aluminum mesh filter. ICBDD45I / ICBDD45R 1143 mm Wolf Cooktop Ventilation 65 wolfappliance.com/specs Downdrafts 762 mm DOWNDRAFT 762 mm 914 mm DOWNDRAFT 230 mm 819 mm 667 mm 1156 mm 60 mm 914 mm 60 mm 230 mm 1143 mm DOWNDRAFT 230 mm 60 mm 1048 mm 38 mm 38 mm 38 mm DEPTH OF CHIMNEY DEPTH OF CHIMNEY DEPTH OF CHIMNEY Planning Information Wolf downdraft systems can be used with Wolf electric and gas cooktops, except unframed models. They can also be used with some integrated modules but are not recommended for use with the electric grill, steamer and fryer modules. A downdraft can also be used with sealed burner rangetop model ICBSRT304. An accessory trim kit is necessary for this installation. Contact your Wolf dealer for details. IMPORTANT NOTE: To install a downdraft with a Wolf cooktop, you must allow for a minimum 638 mm flat counter space from front to back. A countertop with a raised lip or backsplash may not allow enough space for proper installation. Installation of the remote-mounted control module must be within 3 m of the downdraft assembly and a minimum of 102 mm from the outer edge of cooktop element or burner. Downdraft models ICBDD30I, ICBDD36I and ICBDD45I include an 845 m3/hr internal blower. Remote blower assemblies are available for models ICBDD30R, ICBDD36R and ICBDD45R through your Wolf dealer. For local distributor information, visit the international section of our website, wolfappliance.com. The blower will vary in size and is dictated by the cooking unit, the volume of air that needs to be moved and the length of the duct run. Refer to ventilation recommendations on pages 73–74. Downdrafts with an internal blower have a 83 mm x 254 mm duct and for remote blower models, a 83 mm x 356 mm duct. All downdrafts have an adjustable discharge. Consult a qualified HVAC professional for specific installation and ducting applications. ELECTRICAL REQUIREMENTS Wolf downdraft ventilation systems require a separate, grounded 220-240 V AC, 50/60 Hz power supply. A grounded 3-prong receptacle should be located within reach of the .8 m power cord. Certain installations may require that the electrical supply be placed in an adjacent cabinet. Maximum total amps for downdraft systems is 3 amps. Wolf Cooktop Ventilation 66 Downdrafts INSTALLATION WITH COOKTOP INSTALLATION WITH SEALED BURNER RANGETOP 70 mm 70 mm 686 mm, 838 mm OR 1067 mm 686 mm OR 838 mm DOWNDRAFT CUT-OUT DOWNDRAFT CUT-OUT 638 mm min FLAT COUNTERTOP 76 mm min TO CONTROL MODULE 762 mm rec 76 mm min TO CONTROL MODULE FLAT COUNTERTOP 489 mm COOKTOP CUT-OUT WIDTH 762 mm OR 914 mm 610 mm WIDTH OF RANGETOP min* 64 mm min COUNTERTOP CUT-OUT (TOP VIEW) 64 mm min COUNTERTOP CUT-OUT (TOP VIEW) 762 mm rec FLAT COUNTERTOP 64 mm min 638 mm min FLAT COUNTERTOP EDGE OF COOKTOP TO WALL EDGE OF RANGETOP TO WALL 197 mm 483 mm 191 mm PLATFORM DEPTH 745 mm 745 mm 181 mm 610 mm min CABINET DEPTH 181 mm 692 mm min CABINET DEPTH *Additional depth may be required if rangetop is to be installed flush with cabinet face. Wolf Pro Ventilation 67 wolfappliance.com/specs Pro Ventilation Hoods. Professional heritage shines through in Wolf professional-style ventilation. Exteriors are heavy-duty, welded stainless steel, so finely hand-finished that they appear seamless. Pro hoods are available in a variety of widths. Stainless steel baffle filters and halogen lighting extend the professional look and back it up with pro-level performance. KEY FEATURES PRO HOODS • Internal or remote blower options. • Recessed easy-access controls. • Infinite-speed ventilator control. • Heat sentry to automatically turn unit on when excessive heat is sensed. • Easy-to-clean stainless steel baffle filters. • Heat lamp receptacles on 686 mm deep models (bulbs not included). 610 mm Deep 686 mm Deep WALL HOOD WALL HOOD Wolf Pro Ventilation 68 Pro Hoods 610 mm DEEP WALL HOODS 305 mm 457 mm OVERALL HEIGHT 102 mm 610 mm 914 mm AND 1219 mm WIDTHS OVERALL DEPTH 686 mm DEEP WALL HOODS 305 mm 457 mm OVERALL HEIGHT 102 mm 762 mm, 914 mm, 1067 mm, 1219 mm AND 1524 mm WIDTHS 686 mm OVERALL DEPTH Wolf Pro Ventilation 69 wolfappliance.com/specs Planning Information Pro ventilation hoods are recommended for use with all Wolf cooking appliances. Wall hoods should be at least as wide as the cooking surface. IMPORTANT NOTE: For optimal performance in wall hood applications, a pro 686 mm deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle/teppan-yaki. All pro ventilation hoods are shipped without the blower assembly. Internal and remote blowers are available through your Wolf dealer. The blower will vary in size and is dictated by the cooking unit, the volume of air that needs to be moved and the length of the duct run. Refer to ventilation recommendations on pages 73–74. Pro hoods have a 254 mm round duct and vertical discharge. A horizontal discharge kit is available through your Wolf dealer. Consult a qualified HVAC professional for specific installation and ducting applications. Optional classic stainless steel duct covers in a variety of heights are available for all pro wall hoods through your Wolf dealer. For local distributor information, visit the international section of our website, wolfappliance.com. ELECTRICAL REQUIREMENTS Wolf pro ventilation hoods require a separate, grounded 220-240 V AC, 50/60 Hz power supply. Maximum amps for pro ventilation hoods is 4.8 amps. RECIRCULATING INSTALLATION 610 mm and 686 mm deep wall hoods with an internal blower (1014 m3/hr or less), 762 mm and 914 mm widths only, can be used in a non-ducted application with a recirculating filter. In this installation, kitchen air is purified through filters and returned as clean air into the room. A recirculation kit available through your Wolf dealer is required. Wolf Pro Ventilation 70 610 mm Deep Wall Hood INSTALLATION LOCATION OF ELECTRICAL 152 mm E 127 mm 457 mm HEIGHT OF HOOD WIDTH OF HOOD 762 mm TO 914 mm 610 mm TO COUNTERTOP DEPTH OF HOOD Wolf Pro Ventilation 71 wolfappliance.com/specs 686 mm Deep Wall Hood INSTALLATION LOCATION OF ELECTRICAL 152 mm E 127 mm 457 mm HEIGHT OF HOOD WIDTH OF HOOD 762 mm TO 914 mm 686 mm TO COUNTERTOP DEPTH OF HOOD Ventilation Recommendations 72 Blower Assemblies For Wolf ventilation hoods and downdrafts that do not include a blower assembly, an internal or remote blower assembly must be selected to accommodate the cooking appliance, m3/hr requirements and homeowner preferences. Internal and remote blowers are available through your Wolf dealer. For local distributor information, visit the international section of our website, wolfappliance.com. Ventilation recommendations on the following pages provide m3/hr recommendations and blower options for each ventilation hood and downdraft. Refer to the illustrations below for dimensions of Wolf remote blowers. Installation instructions shipped with each Wolf ventilation product provide detailed specifications. These instructions can also be found on our website, wolfappliance.com/specs. Remote Blowers 1014 m3/hr and 1521 m3/hr 2028 m3/hr 2535 m3/hr 457 mm 527 mm 718 mm 749 mm 254 mm Diameter 622 mm 375 mm 749 mm 257 mm 356 mm 629 mm 254 mm 749 mm 254 mm Diameter 394 mm 533 mm 121 mm 254 mm 254 mm Diameter 375 mm 749 mm 264 mm 559 mm 184 mm 635 mm 184 mm Ventilation Recommendations 73 wolfappliance.com/specs Wolf Product m3/hr Recommendations MODEL COOKTOP HOODS DOWNDRAFTS PRO HOODS MINIMUM m 3/hr MINIMUM m 3/hr MINIMUM m 3/hr COOKTOPS ICBCT15I ICBCT15E ICBCT15G 363 254 363 ICBCT30I ICBCT30IU* ICBCT30E ICBCT30EU* ICBCT30G 761 592 845 ICBCT36I ICBCT36IU* ICBCT36E ICBCT36EU* ICBCT36G 1014 845 845 ICBIG15 ICBIS15 ICBIF15 363 Not Recommended 363 ICBIM15 363 254 363 INTEGRATED MODULES DUAL FUEL RANGES ICBDF304 ICBDF366 ICBDF364C ICBDF364G 1521 ICBDF486C ICBDF486G ICBDF484CG ICBDF484F 1859 ICBDF606CG ICBDF604CF 2535 SEALED BURNER RANGETOPS ICBSRT304 845 845 ICBSRT364C ICBSRT364G 1521 ICBSRT486C ICBSRT486G ICBSRT484CG ICBSRT484F 1521 GAS RANGES ICBR304 845 ICBR364C ICBR364G 1521 ICBR486C ICBR486G ICBR484CG 1859 ICBR606CG 2535 *Downdraft systems are not recommended for use with these models. m3/hr recommendations are based on total kW output. Wolf recommends 1.69 m3/hr per .03 kW. Additional m3/hr may be required for long duct runs or ranges and rangetops with a charbroiler or griddle/teppan-yaki. Ventilation Recommendations 74 Wolf Ventilation Blower Options INTERNAL m 3/hr BLOWER REMOTE 1014 1521 1859 946 1521 2028 2535 813160 813161 813162 CE 900 TI 812307 812308 812309 • • COOKTOP LOW-PROFILE HOODS ICBCTEWH36 DOWNDRAFTS ICBDD30R • • • ICBDD36R • • • ICBDD45R • • • PRO 610 mm WALL HOODS ICBPW362418 • • • • • ICBPW482418 • • • • • ICBPW302718 • • • • • ICBPW362718 • • • • • ICBPW422718 • • • • • • • • • • PRO 686 mm WALL HOODS ICBPW482718 • ICBPW602718 • Wolf Shipping Weights 75 wolfappliance.com/specs Wolf Product Shipping Weights Shipping Weights kg E SERIES OVENS 762 mm Single Oven 762 mm Double Oven 124 211 34 45 INDUCTION COOKTOPS 381 mm Cooktop 762 mm Framed / Unframed 914 mm Framed / Unframed 14 22 32 ELECTRIC COOKTOPS 381 mm Cooktop 762 mm Framed / Unframed 914 mm Framed / Unframed 14 20 27 GAS COOKTOPS 381 mm Cooktop 762 mm Cooktop 914 mm Cooktop 14 23 30 147 202–213 302–340 397–431 762 mm Rangetop 914 mm Rangetop 1219 mm Rangetop 73 86–100 109–127 GAS RANGES 762 mm Range 914 mm Range 1219 mm Range 1524 mm Range 147 202–213 295–340 397–431 COOKTOP VENTILATION HOODS 762 mm Low-Profile Wall Hood 914 mm Low-Profile Wall Hood 1143 mm Low-Profile Wall Hood 1067 mm Low-Profile Island Hood 24 23–26 25–28 42 DOWNDRAFT VENTILATION INTEGRATED MODULES Electric Grill Electric Steamer Electric Fryer Multi-Function Cooktop 762 mm Range 914 mm Range 1219 mm Range 1524 mm Range SEALED BURNER RANGETOPS WARMING DRAWER 762 mm Warming Drawer kg DUAL FUEL RANGES MICROWAVE OVEN Convection Microwave with Grill Shipping Weights 23 18 14 14 762 mm Downdraft 914 mm Downdraft 1143 mm Downdraft 34 36 39 PRO VENTILATION HOODS 610 mm Deep Wall Hoods 686 mm Deep Wall Hoods 38–67 42–74 Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service marks of Sub-Zero, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries. The information and images in this guide are the copyright property of Wolf Appliance, Inc. Neither this guide nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Wolf Appliance, Inc. ©Wolf Appliance, Inc. all rights reserved. WOLF APPLIANCE, INC. P O BOX 44848 MADISON, WI 53744 USA WOLFAPPLIANCE.COM IWDG 4 / 2014
