Download Canon CR-1 MARK II Specifications

6. Daily Inspection and Maintenance
6.7 Connecting the USB Cable
Turn OFF the power of the main unit.
Press the power switch to the O side.
Remove the power plug from the AC outlet.
Connect the USB cable to the main unit.
Insert the USB cable connector firmly into the USB connector while holding down the main unit
with your hand.
Connect the USB connector at the other end to the computer.
Connect the connector at the other end of the USB cable to the computer.
Note: Use the following type of USB cable. Communication may not be possible if any other kind
of cable is used.
• Cable with type AB connector plug supporting USB 2.0 Hi-Speed, maximum length of
3 meters
For further details, contact a Canon representative or the distributor from which you
purchased the unit.