Download MTD 12AV566M055 Specifications

Safe Operation
Practices • Set=Up • Operation
• Maintenance
• Service • Troubleshooting
OPER roR's
• Warranty
L
Self Propelled Mower m Model Series V560
MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019
PrintedIn USA
FormNo.769-03495
(September21,2007)
1
ToTheOwner
ThankYou
Thank you for purchasing
a Lawn Mower
manufactured
by
This product has met the rigid safety standards
Power Equipment
Institute and an independent
MTD LLC. It was carefully engineered
to provide excellent
performance
when properly operated and maintained.
Please read this entire
It instructs
maintain
persons
manual
prior to operating
you how to safely and easily set up, operate
your machine.
laboratory.
or contact
and
the machine,
carefully
follow
product
in this manual
information
is relative
available
the
Throughout
machine
to the most recent
at the time of printing.
Review
Support
telephone
address
can be found
this manual,
manufacturer
all references
is responsible
satisfaction
on
at all
to right and left side of the
from the operating
issues with regards to performance,
position
for all engine-related
power-rating,
specifications,
warranty and service. Please refer to the engine manufacturer's
Owner's/Operator's
Manual, packed separately with your
Manual may cover a range of product specifications
for various
models. Characteristics
and features discussed and/or illustrated
may not be applicable
MTD's Customer
address and mailing
are observed
The engine
this manual frequently to familiarize yourself with the machine,
its features and operation.
Please be aware that this Operator's
in this manual
website
concerning
MTD service dealer
this page. We want to ensure your complete
times.
recommended
safety practices at all times. Failure to do so could
result in personal injury or property damage.
All information
or questions
phone your local authorized
us directly.
numbers,
Please be sure that you, and any other
who will operate
If you have any problems
the machine,
the equipment.
of the Outdoor
testing
machine,
for more information.
Service
.....................................................................
to all models. MTD LLC
reserves the right to change product specifications,
designs and
equipment
without notice and without incurring obligation.
Table of Contents
Safe Operation
Assembly
Controls
Practices ........................................
& Set-Up ..................................................
& Features ................................................
3
16
8
11
Troubleshooting
.....................................................
Illustrated
Parts List ..............................................
18
20
Opera tion ................................................................
12
Warranty
24
Maintenance
14
&Adjustment
.................................
RecordProductinformation
Before setting
up and operating
information
model
in the provided
plate by standing
MODEL NUMBER
your new equipment,
locate the model plate on the equipment
EFIEFIEFIEFIEFIE
please
and record the
area to the right. You can locate the
at the operator's
position
and looking
SERIAL NUMBER
down at the tea r of the deck. This information
will be necessary,
should you seek technical support via our web site, Customer
Support
Department,
................................................................
or with a local authorized
71DF1DF1DF1DF1DE
service dealer.
CustomerSupport
Please
If you
do NOT
have
return
difficulty
this machine,
you
Visit us on the
Call a Customer
Write
the machine
assembling
can
seek
web
to the retailer
this product
help
from
the
or dealer
or have
experts.
without
any questions
Choose
from
the
first contacting
regarding
options
the
below:
at www.mtdproducts.com
Support
Representative
us at MTD LLC • P.O. Box 361131
at (800) 800-7310
• Cleveland,
or (330) 220-4683
OH • 44136-0019
our
controls,
Customer
operation,
Support
Department.
or maintenance
of
2
importantSafeOperationPractices
WARNING:
This symbol
could endanger
points
the personal
all instructions
safety and/or
in this manual
with these instructions
out important
before
property
attempting
may result in personal
When you see this symbol.
safety instructions
of yourself
to operate
which,
if not followed,
and others.
this machine.
Read and follow
Failure to comply
injury.
HEED ITS WARNING!
CALIFORNIA
PROPOSITION
65
WARNING: Engine Exhaust, some of its constituents,
and certain vehicle components
contain or emit chemicals known to State of California to cause cancer and birth defects
or other reproductive
,A
WARNING:
Battery
compounds,
harm.
posts, terminals,
chemicals
known
and related
accessories
to the State of California
contain
lead and lead
to cause cancer and reproductive
harm. Wash hands after handling.
DANGER: This machine
this manual.
operator
was built to be operated
As with any type of power
according
equipment,
can result in serious injury. This machine
toes and feet and throwing
objects.
to the safe operation
carelessness
is capable
Failure to observe
practices
in
or error on the part of the
of amputating
the following
fingers,
hands,
safety instructions
could result in serious injury or death.
6.
GeneralOperation
1.
before
operation.
place for future and regular
replacement
parts
Keep this manual
reference
3.
This machine
Therefore,
times. This machine
personal
7.
use
piece of power equipment,
has been designed
caution
to perform
8.
at all
one job:
by an adult.
is to be
should
who are familiar
be allowed
could
Plan your mowing
pattern
roads, sidewalks,
To help avoid
to avoid discharge
zone behind
helpers
material
to ricochet
or a thrown
object
back
injury,
handles and keep children,
and pets at least 75 feet from
Stop machine
your eyes. Thrown
if anyone
mower
enters area.
objects
which
ricochet
can
to the eyes.
Wear sturdy, rough-soled
work shoes and close-fitting
slacks and shirts. Shirts and pants that cover the arms
and legs and steel-toed
operate
weight
11.
of material
and the like. Also,
against a wall or obstruction,
blade contact
cause serious injury
to use this
can cause serious
Always wear safety glasses or safety goggles during
operation and while performing
an adjustment
or repair
to protect
with these
over or picked up
objects
bystanders
material
while it is in operation.
9.
be tripped
injury.
bystanders,
10.
individuals
rules of safe operation
machine.
which
by the blade. Thrown
stay in operator
purpose.
Never allow children under 14 years of age to operate this
machine. Children 14 and over should read and understand
Only responsible
the area where the equipment
which may cause discharged
toward the operator.
the instructions
and safe operation practices in this manual
and on the machine and should be trained and supervised
5.
objects,
and thrown
toward
and the proper
exercise extreme
to mow grass. Do not use it for any other
4.
foreign
avoid discharging
Be completely
familiar with the controls
of this machine before operating it.
is a precision
in a safe
and for ordering
2.
not a plaything.
inspect
used. Remove all stones, sticks, wire, bones, toys and other
Read this operator's manual carefully in its entirety before
attempting
to assemble this machine. Read, understand,
and follow all instructions
on the machine and in the
manuals)
Thoroughly
this machine
shoes are recommended.
or light-
(e.g. canvas) shoes.
Do not put hands or feet near rotating
cutting
Never
in bare feet, sandals, slippery
deck. Contact
hands, toes and feet.
parts or under the
with blade can amputate
fingers,
12. Amissing
ordamaged
discharge
cover
cancause
blade
contact
orthrown
object
injuries.
13. Many
injuries
occur
asaresult
ofthemower
beingpulled
overthefootduring
afallcaused
byslipping
ortripping.
Donotholdontothemower
ifyouarefalling;
release
the
handle
immediately.
14. Never
pullthemower
back
toward
youwhileyouare
walking.
Ifyoumustback
themower
away
fromawallor
obstruction
firstlookdownandbehind
toavoidtripping
andthenfollowthese
steps:
a. Stepback
frommower
tofullyextend
yourarms.
b. Besureyouarewellbalanced
withsurefooting.
c. Pullthemower
backslowly,
nomore
thanhalfway
toward
you.
d. Repeat
these
steps
asneeded.
15.
Do not operate
alcohol
16.
while
under the influence
while
The blade control
starting
(kickback)
28.
injury through
If you feel you are losing your footing,
blade control handle immediately
rotating within three seconds.
Stop the blade when crossing gravel drives, walks or roads.
21.
If the equipment should start to vibrate abnormally, stop
the engine and check immediately for the cause. Vibration
is generally a warning of trouble.
22.
23.
Never operate mower without proper trail shield, discharge
cover, grass catcher, blade control handle or other safety
protective devices in place and working. Never operate
mower with damaged safety devices. Failure to do so can
result in personal injury.
24.
Muffler and engine become hot and can cause a burn. Do
not touch.
25.
Never attempt
26.
while
the engine
the manufacturer.
height
is running.
made for this machine
I
SECTION
2
--
by
Failure to do so can result in personal
injury.
4
Watch
IMPORTANT SAFE OPERATION
PRACTICES
when
for holes,
never
changing
ruts, rocks,
which
extra
on a sloped
or
do not mow it.
serious personal
up and down.
direction
hidden
Exercise
on slopes.
objects,
or bumps
you to slip or trip. Tall grass can hide
Always be sure of your footing.
A slip and fall can cause
injury. If you feel you are losing your
handle immediately
three (3) seconds.
and
Do Not:
1.
Do not mow near drop-offs,
could lose your footing
ditches
or embankments,
you
or balance.
Do not mow slopes greater than 15 degrees as shown
on
the slope gauge.
Do not mow on wet grass. Unstable
slipping.
footing
could cause
Children
Tragic accidents
presence
can occur if the operator
of children.
and the mowing
Children
activity.
1.
Keep children
to the mower
the dangers.
will remain where you last saw them.
out of the mowing
care of a responsible
is not alert to the
are often attracted
They do not understand
Never assume that children
area and under watchful
adult other than the operator.
2.
Be alert and turn mower
3.
Before and while moving
down for small children.
4.
Use extreme care when approaching
blind corners,
doorways, shrubs, trees, or other objects that may obscure
your vision of a child who may run into the mower.
5.
Keep children away from hot or running
suffer burns from a hot muffler.
6.
Never allow children under 14 years of age to operate this
machine. Children 14 and over should read and understand
the instructions
Only use parts and accessories
this machine
the face of slopes;
caution
which can cause
obstacles.
3.
Shut the engine off and wait until the blade comes to
a complete stop before removing the grass catcher or
unclogging the chute. The cutting blade continues to
rotate for a few seconds after the blade control is released.
Never place any part of the body in the blade area until you
are sure the blade has stopped rotating.
adjustment
Mow across
extreme
light. Walk, never
to make a wheel or cutting
on slopes requires
Do:
2.
20.
or good artificial
in this manual,
hilly area. If the slope is greater than 15 degrees,
and the blade will stop
Mow only in daylight
run.
bruises or sprains
to slip and fall accidents,
balance, release the blade control
the blade will stop rotating within
19.
cord
engine faster than
are not covered
measure slopes before operating
3.
release the
of starter
caution. If you feel uneasy on a slope, do not mow it. For your
safety, use the slope gauge included as part of this manual to
handle
Never operate the mower in wet grass. Always be sure of
your footing. A slip and fall can cause serious personal
injury.
occur which
can result in severe injury. Operation
must operate easily in both directions and automatically
return to the disengaged
position when released.
18.
If situations
Slopes are a major factor related
on machines
blade. The blade control
Rapid retraction
will pull hand and arm toward
Slope Operation
Doing so makes the safety device
with the rotating
pull cord slowly until resistance
use care and good judgement.
Contact Customer Support
for assistance or the name of the nearest service dealer.
2.
and may result in personal
engine,
you can let go. Broken bones, fractures,
could result.
handle is a safety device. Never attempt
to bypass its operation.
inoperative
mechanism
engine.
When starting
is felt, then pull rapidly.
1.
Do not engage the self-propelled
contact
of
or drugs.
so equipped
17.
the mower
27.
off if a child enters the area.
backwards,
and safe operation
and on the machine
adult.
and be trained
look behind and
engines.
practices
They can
in this manual
and supervised
byan
Service
3.
Check the blade and engine
intervals
To avoid personal
care in handling
injury
or property
damage
gasoline. Gasoline
can ignite.
is extremely
flammable
original
Wash your skin and change
clothes
Use only an approved
3.
Never fill containers
gasoline
container.
inside a vehicle
4.
Remove gas-powered
equipment
from
Keep all nuts, bolts, and screws tight to be sure the
equipment
container,
rather than from
a gasoline
Keep the nozzle in contact
container
opening
7.
at all times until fueling
Extinguish
of ignition.
all cigarettes,
cigars, pipes and other
8.
Never remove gas cap or add fuel while
bottom
of filler neck to provide
cap and tighten
or fuel container
heater, furnace, clothes
near an open
or other debris build-up.
Allow
11.
Clean up oil or fuel spillage
check components
For safety
and replace
equipment
performance
specifications
and compromise
machine
before
storing.
monoxide,
area.
safe
frequently
for cracks
12.
Do not crank engine
13.
Maintain
or replace
with spark plug removed.
safety and instruction
labels, as
Observe proper disposal laws and regulations.
Improper
disposal of fluids and materials can harm the environment.
To avoid serious injury
or death, do not modify
with the governor
with factory
setting
setting
engine in any
can lead to a runaway
at unsafe speeds. Never tamper
of engine governor.
an odorless
Notice Regarding Emissions
gas.
Before cleaning,
repairing,
blade and all moving
starting.
or inspecting,
parts have stopped.
spark plug wire and ground
unintended
or in a poorly ventilated
carbon
or over-speed
speed of the engine.
engine and cause it to operate
contains
setting
the maximum
Check fuel line, tank, cap, and fittings
way. Tampering
indoors
governor
controls
Donot modify engine
to cool at least 5 minutes
Never run an engine
and deadly
the engine's
The governor
and
any fuel soaked debris.
Engine exhaust
2.
could expose
or leaks. Replace if necessary.
14.
free of grass, leaves,
General Service:
1.
cover, and trail shield
which
necessary.
dryer or other gas appliances.
To reduce fire hazard, keep machine
Do not change
the engine.
securely.
engine.
Never store the machine
10.
flame, spark or pilot light as on a water heater, space
14.
frequently
do not meet the original
operating
If gasoline is spilled, wipe it off the engine and equipment.
Move machine to another area. Wait 5 minutes before
remove
discharge
objects to be thrown.
may lead to improper
for fuel expansion.
11.
13.
height
is running.
safety!"
Replace gasoline
12.
which
before
10.
starting
components,
Repair the
the mower.
immediately
with original equipment
manufacturer's
(O.EM.) parts only, listed in this manual. "Use of parts
engine is hot or
Never over fill fuel tank. Fill tank to no more than 1 inch
below
the engine
parts or allow
protection,
vapors will
Allow engine to cool at least two minutes
for any damage.
and operating
to make a wheel or cutting
while
Grass catcher
the mower
starting
Never attempt
moving
because flammable
inspect
before
are subject to wear and damage
sources
proper
After striking a foreign object, stop the engine, disconnect
the spark plug wire and ground against the engine.
adjustment
9.
Never fuel machine indoors
accumulate in the area.
9.
8.
Do
device.
7.
running.
refueling.
is complete.
Check their
regularly.
damage
nozzle.
condition.
Never ta roper with safety devices.
Thoroughly
with the rim of the fuel tank or
not use a nozzle lock-open
6.
dispenser
is in safe working
operation
the truck or
may lead to improper
safety!"
5.
6.
on the
specifications
and compromise
Mower blades are sharp and can cut. Wrap the blade or
wear gloves, and use extra caution when servicing them.
trailer and refuel it on the ground. If this is not possible,
then refuel such equipment
on a trailer with a portable
5.
blade
4.
or on a truck or trailer
bed with a plastic liner. Always place containers
ground away from your vehicle before filling.
equipment
performance
immediately.
2.
inspect
the original equipment
manufacture's
(O.E.M.) blade only,
listed in this manual. "Use of parts which do not meet the
use extreme
and the vapors are explosive. Serious personal injury can
occur when gasoline is spilled on yourself or your clothes,
which
bolts at frequent
Also, visually
for damage (e.g., bent, cracked, worn) Replace blade with
SafeHandling Of Gas01ine:
I.
mounting
for proper tightness.
against
make certain the
Disconnect
the
the engine to prevent
Engines which
EPA emission
are certified
regulations
to comply
with California
and federal
for SORE (Small Off Road Equipment)
are certified
to operate
may include
the following
Modification
(EM) and Three Way Catalyst (TWC) if so equipped.
SECTION2
--
on regular
emission
unleaded
control
gasoline, and
systems: Engine
IMPORTANT SAFE OPERATION
PRACTICES
S
SparkArrestor
AverageUsefulLife
According
_
Products
Safety Commission
(CPSC) and the U.S. Environmental
Protection Agency (EPA),
this product has an Average Useful Life of seven (7) years, or 140
exhaust system is equipped
a new machine or have the machine inspected annually by an
authorized service dealer to ensure that all mechanical and
meeting
applicable
with a spark arrester
local or state laws (if any).
Ira spark arrester is used, it should
effective
to the Consumer
internal combustion
engine and should not be used
machine isforest-covered,
equipped with brush
an
on ARNING:
or near anyThis
unimproved
covered or grass-covered
land unless the engine's
working
order by the operator.
the above is required
by law (Section
be maintained
in
In the State of California
hours of operation.
At the end of the Average Useful Life, buy
safety systems are working properly and not worn excessively.
Failure to do so can result in accidents, injuries or death.
4442 of the California
Public Resources Code). Other states may have similar laws.
Federal laws apply
on federal
lands.
A spark attester for the muffler is available through your
nearest engine authorized
service dealer or contact the service
department,
P.O. Box 361131 Cleveland,
WARNING:
follow
Ohio 44136-0019.
Your Responsibility--Restrict
the warnings
and instructions
the use of this power
in this manual
machine
to persons
and on the machine.
SAVETHESEiNSTRUCTIONS!
6
I
SECTION 2 --
IMPORTANT SAFE OPERATION
PRACTICES
who read, understand
and
Sight and hold this level with a vertical tree...
or a corner of a building...
I
I
|
!
!
!
!--
Z
0
0
!
!
!-Z
i
I
¢N
Z
0
i
I-
!
|
15 °
Usethis page as a guide to determine slopeswhere you may not operate safely.
WARNING:
Do not operate
(a rise of approximately
mowers
up and down
up and down
slopes.
your lawn mower
on such slopes. Do not mow on inclines with a slope in excess of 15 degrees
2-1/2 feet every 10 feet).
A riding
mower
could overturn
slopes, never across the face of slopes. Operate
walk-behind
and cause serious injury. Operate
mowers
riding
across the face of slopes, never
3
Assembly& Set-Up
Contents of Carton
One Lawn Mower
One Lawn Mower
One GrassCatcher
One Engine Operator's
Operator's
One Bottle
Manual
of Oil
One Hardware
Manual
Pack
One Side Discharge Chute
Assembly
NOTE:This
unit is shipped
2.
without
gasoline
or oil in the engine.
Fill up gasoline and oil as instructed
in the accompanying
manual BEFORE operating your mower.
engine
Locate the hairpin clip on the weld pin on each side of
lower handle.
a.
Remove hairpin clip from this hole. Using a pair of
pliers, insert hairpin clip into the hole on pin closest
to the bracket.
See Fig. 3-2. Repeat on other
side.
Handle
1.
Remove any packing material
upper and lower handles.
a.
which
Pull up and back on upper
Hardware
may be between
Pack
handle as shown in Fig.
3-1. Make certain the lower handle is seated securely
into the handle mounting brackets.
cables while lifting the handle up.
Do not crimp
Figure
b.
3=2
Insert a carriage bolt from the hardware
the upper hole on the handle mounting
pack into
bracket.
Secure with one plastic wing nut, also included
in the hardware
remaining
Figure 34
b.
Tighten star knobs to secure upper handle to lower
handle. Make sure that each carriage bolt is seated
properly in the handle.
pack. Repeat on other side with
items from hardware
pack.
3_
The rope guide is attached
handle.
to the right side of the upper
See Fig. 3-3. Loosen the wing
nut which
b.
secures the
of grass bag over hooks on the
frame. See Fig. 3-4. All the plastic
rope guide.
channels except
center top of bag attach from outside
Figure
4_
Slip plastic channel
Figure 3-4
3=3
against
of bag.
a.
Hold blade control
upper
b.
Pull starter
control.
rope out of the engine.
c.
Slip starter
rope into rope guide.
d.
Tighten
handle.
c.
Release blade
2_
Attach
center top of bag from inside of bag.
Follow the steps below to attach the grass catcher:
a.
Lift rear discharge
door. See Fig. 3-5.
f
wing nut.
Insert post on cable tie into hole provided on the lower
handle. Pull cable tie tight and trim excess.
GrassCatcher
Follow steps below to assemble
the grass catcher. Make
certain bag is turned right side out before assembling
(warning label will be on the outside).
a.
Place bag over frame
at the bottom.
so that its black plastic
side is
Figure
3-5
Place grass catcher on the pivot rod. Let go of
discharge door so that it rests on the grass catcher.
WARNING:
Never operate
mower
on the grass catcher are firmly
rod and the rear discharge
unless the hooks
seated on the pivot
door rests firmly
against
top of the grass catcher.
SECTION
3 --
ASSEMBLY& SET-UP
9
Each wheel has a height adjustment
Side DischargeChute
Your mower
is shipped
as a mulcher. To convert
discharge,
make sure grass catcher
discharge
door is closed.
1.
On the side of the mower,
height
to side
is off of the unit and rear
lift the mulching
of the mower.
lever to change
the cutting
Refer to Fig. 3-7.
1.
Depress height adjustment
2.
Slide lever to desired
lever towards
position
wheel.
for a change
in cutting
height.
plug. See
Figure 3-6.
3.
f
Release lever towards
deck.
IMPORTANT:All
wheels
relative
For rough
position.
height adjustment
scalping of grass.
must be placed in the same
or uneven
lawns, move the
lever to a higher position.
This will stop
Drive Control
The adjustment
wheel is located in the drive control handle
housing and is used to tighten or loosen the drive belt. You will
need to adjust the drive control
itself with the drive control
hesitate
if the mower
engaged
with the drive control
does not propel
or if the mower's
engaged.
wheels
If either of these
conditions occur, rotate adjustment
wheel clockwise to tighten
cable or counterclockwise
to loosen the cable. See Fig. 3-8.
F
k.
j
Figure 3-6
2_
Slide two hooks of side discharge
mulching
plug assembly.
NOTE: Do not remove
chute under hinge pin on
Lower the mulching
side mulching
plug.
plug at any time, even
when you are not mulching.
Adjustments
CuttingHeight
f
Figure 3-8
Gasand Oil Fill-Up
Refer to the separate engine
owner's
manual
for additional
engine information.
1.
Add oil provided
of the box.
before
2_
Service the engine with gasoline as instructed
separate engine
starting
owner's
WARNING:
unit for the first time out
in the
manual.
Use extreme
care when
handling
gasoline. Gasoline is extremely flammable and the
vapors are explosive. Never fuel the machine
indoors
,.J
Figure 3-7
SECTION
3 --
ASSEMBLY&
SET-UP
or while
Extinguish
the engine
cigarettes,
sources of ignition.
is hot or running.
cigars, pipes and other
4
Controls
andFeatures
Drive Controk
Recoil Starter
Side Discharge
Chute
Cutting Height
Adjustment Levers
J
Figure 44
BladeControl
MulchPlug
The blade control is attached to the upper handle of the mower.
Depress and squeeze it against the upper handle to operate the
The mulch plug is used for mulching purposes. Instead of
collecting the grass clippings in a grass catcher or using the
side discharge chute, some mower models have the option
of recirculating the clippings back to the lawn. This is called
mulching.
unit. Release itto stop engine and blade.
_
Never
ARNING:
attempt This
to bypass
blade control
its operations.
is a safety device.
SideDischargeChute
Your mower
DriveControl
The drive control is located on top of the upper handle and is
used to engage the drive. Squeeze it against the upper handle
to engage the drive; release it to slow down or stop mower
from
propelling.
is shipped
Assembly
& Set-Up section to attach the side discharge
i_ll
One adjustment
lever is located on each wheel and is used to
adjust the cutting height. All four levers have to be at the same
The recoil starter
position
to ensure a uniform
in the
chute.
chute area on Keep
cuttinghands
deck.
warning
WARNING:
andRefer
feet to
away
from label
the
on the unit.
RecoilStarter
behind
the instructions
the grass
to the side instead, follow
CuttingHeight AdjustmentLevers
relative
as a mulcher. To discharge
clippings
is attached
to the right upper
the unit and pull the recoil starter
handle.
Stand
rope to start the unit.
cut.
11
5
Operation
f
Starting Engine
WARNING:
Be sure no one other than the operator
engine or operating
mower. Never run engine
is standing near the lawn mower while starting
indoors or in enclosed, poorly ventilated areas.
Engine exhaust
contains
odorless and deadly
carbon monoxide,
loose clothing away from any moving
engine and lawn mower.
Follow the set of instructions
engine
manual
an
gas. Keep hands, feet, hair and
pertaining
parts on
to your unit. Refer to
for help with the engine.
Briggs & Stratt0n Engine:
I.
If equipped,
push primer
seconds between
around
three times. Wait about
two
each push. See Fig. 5-I. In temperature
55 ° F or below, prime five times.
Do not prime to
restart a warm engine.
2.
Standing
against
3.
Holding
starter
behind
upper
the mower,
squeeze the blade control
handle.
these two handles together
Figure 5-1
firmly, grasp recoil
handle and pull rope out with a rapid, continuous,
full arm stroke. See Fig. 5-I. Keeping
a firm grip on the
starter handle, let the rope rewind slowly. Repeat until
engine cranks. Let the rope rewind each time slowly.
f
Honda Engine:
I.
Place the fuel valve lever found
on the left side of the
engine into the ON (OPEN) position.
2.
See Fig. 5-2.
Move the choke lever (if equipped)
all the way backward
into the choke position.
3.
Standing
behind
the mower,
squeeze the blade control
against upper handle. The choke will now begin to slowly
return to the off choke position after activating the blade
control.
4.
Therefore,
quickly
move onto step four below.
Holding these two handles together firmly, grasp recoil
starter handle and pull rope out with a rapid, continuous,
full arm stroke. See Fig. 5-2. Keeping
starter
handle let the rope rewind
engine cranks. Let the rope rewind
a firm grip on the
slowly.
Repeat until
each time slowly.
Stopping Engine
1.
Release blade control
J
to stop the engine and blade.
Figure
before performing
anythe
work
on to
thestop
mower
or to
WARNING:
Wait for
blade
completely
remove the grass catcher.
5-2
UsingYourLawnMower
UsingGrassCatcher
Be sure lawn is clear of stones, sticks, wire, or other objects
You can use the grass catcher to collect
operating the mower.
which could damage
be accidently thrown
serious personal
1.
lawn mower or engine. Such objects could
by the mower in any direction and cause
injury to the operator
1.
and others.
The operation
of any lawn mower
performing
operating
any adjustments
the mower,
instructions
while you are
in the
& Set-Up" section. Grass clippings
will
automatically
collect in bag as you run mower.
mower till grass bag is full.
can
result in foreign objects being thrown into the eyes,
which can damage your eyes severely. Always wear
safety glasses while
grass catcher following
"Assembly
Once the engine is running, squeeze the drive control
against the upper handle to propel mower.
WARNING:
Attach
clippings
Operate
2.
Stop engine completely
by releasing the blade control.
Make sure that the unit has come to a complete stop.
3.
Lift discharge
or while
the mower
or repairs on it.
clippings
door and pull grass bag up and away from
to remove the bag. Dispose of the grass
and reinstall
the bag when complete.
Usingas Mulcher
engine.
For mulching
grass, remove the grass catcher
chute from the mower.
For effective
grass. If the grass has been allowed
inches, mulching
bag clippings
mulching,
do not cut wet
Use the grass catcher
_
Remove wire from the spark plug,
thoroughly
ARNING: inspect
If you strike
mowera foreign
for any damage,
object, stop
and the
repair damage
to grow in excess of four
is not recommended.
instead.
and side discharge
before
Extensive vibration
to
indication
inspected
restarting
of mower
and operating.
during
of damage. The unit should
and repaired.
SECTION
5 --
operation
is an
be promptly
OPERATION
13
6
Maintenance& Adjustments
Maintenance
2.
Lubricate
motor
General Recommendations
Always observe
maintenance.
The warranty
are removed
for any reason, lubricate
surface of the pivot arm and inner surface of the wheel
with light oil. See Fig. 6-1.
safety rules when
performing
any
3.
on this lawn mower
does not cover items that
Lubricate
the torsion spring and pivot
discharge
door and side mulch plug periodically
oil to prevent
points on the rear
with light
rust. See Fig. 6-1.
have been subjected to operator abuse or negligence. To
receive full value from warranty, operator must maintain
the lawn mower as instructed
here.
4.
The transmission
is pre-lubricated
and does not require lubrication.
and sealed at the factory
Changing
5.
Follow the accompanying
manual
of engine-governed
speed will void engine
schedule
warranty.
All adjustments
season.
Periodically
should
be checked
at least once each
and make sure these are
A
and instruction
engine
for engine
for lubrication
lubrication.
DeckCare
Clean underside
check all fasteners
tight.
build-up
of the mower
of grass clippings
deck after each use to prevent
or other
debris. Follow steps below
for this job.
WARNING:
Always stop engine,
plug, and ground
against
any type of maintenance
engine
disconnect
spark
1.
Disconnect spark plug wire. Drain gasoline from lawn
mower or place a piece of plastic under the gas cap.
2.
Tip mower
before performing
on your machine.
Lubricate
so that it rests on the housing.
with the air cleaner
Lubrication
I.
the wheels at least once a season with light oil (or
oil). If wheels
pivot points
on the blade control
a season with light oil. This control
both directions. See Fig. 6-1.
at least once
must operate
facing
up. Hold mower
Keep the side
firmly.
any direction
and do not leave the mower tipped for
WARNING:
tip can
the drain
mowerinto
more
° in
any length of Never
time. Oil
the than
upper90 part
of the engine causing a starting problem.
freely in
3.
Scrape and clean the underside
of the deck with a suitable
tool. Do not spray with water.
IMPORTANT:
Do not use a pressure washer or garden
hose
to clean your unit. These may cause damage to bearings,
or the engine. The use of water will result in shortened life
and reduce serviceability.
4.
Put the mower
back on its wheels
on the ground.
If you
had put plastic under the gas cap earlier, make sure to
remove it now.
Figure 6-1
14
Engine Care
ReplacingRearFlap
A list of key engine maintenance
performance
accompanying
Maintain
by the mower
jobs
required
for good
1.
is given below. Follow the
engine manual
for a detailed
oil level as instructed
list and instructions.
in engine manual.
Service air cleaner every 25 hours under
Clean every few hours under extremely
normal
To remove rear flap, lift rear door, and press flap in on
either side to remove from hole. See Fig. 6-2.
r
conditions.
..........
!
dusty conditions.
Poor engine performance
and flooding usually indicates
that the air cleaner should be serviced. To service the air
cleaner,
refer to the engine
manual.
Clean spark plug and reset the gap once a season. Spark
plug replacement
mowing
is recommended
season. Check engine
at the start of each
manual
for correct plug
/
type and gap specifications.
Clean engine regularly with a cloth or brush. Keep the
top of the engine clean to permit proper air circulation.
Remove all grass, dirt, and combustible
area.
debris from
muffler
Figure 6-2
2.
Remove flap from opposite
in the opposite
hole and replace
order and manner
SECTION 6 --
with new flap
of removal.
MAINTENANCE
& ADJUSTMENTS
15
7
Service
Blade Care
5.
Lubricate
the engine crankshaft
the blade adapter
WARNING:
sharpening
When removing
or replacement,
the cutting
protect
blade for
onto the engine crankshaft.
Place the blade on the adapter
such that the side of the blade marked "Bottom"
(or with
your hands with
part number)
a pair of heavy gloves or use a heavy rag to hold the
blade.
Periodically
inspect the blade adapter
for cracks, especially
strike a foreign object. Replace when necessary.
below for blade service.
1.
Disconnect spark plug boot from spark plug. Turn mower
on its side making sure that the air filter and the carburetor
are facing up.
2.
operating
faces the ground
position.
blade and the blade adapter
to the engine
which
hold the
crankshaft.
See
Fig. 7-1.
is in the
Place blade bell support on the blade. Align notches
blade bell support with small holes in blade.
7.
Replace hex bolt and tighten
rain., 600 in. Ibs. max.
blade bolt for correct
and
flanges.
6.
To ensure safe operation
Remove the bolt and the blade bell support
when the mower
Make sure that the blade is aligned
seated on the blade adapter
if you
Follow the steps
and the inner surface of
with light oil. Slide the blade adapter
hex bolt to torque:
of your mower,
periodically
on the
450 in. Ibs.
check the
torque.
Belt Care
Remove two shoulder
mower
screws securing
front drive cover to
deck. See Figure 7-2. Press inward
on sides of front
drive cover and release tabs that secure it to the height
adjuster
brackets.
Remove drive cover from mower.
r
Figure 74
3.
Remove blade and adapter
7-1.
NOTE:When
removing
from the crankshaft.
See Fig.
\
Figure 7-2
these items on units with a 25mm
adapter, the pulleys and washers may also break free from
the crankshaft. Be sure to make note of the orientation
of
these items for reassembly.
4.
Remove blade from the adapter for testing balance.
Balance the blade on a round shaft screwdriver to check.
Remove metal from the heavy side until it balances evenly.
When sharpening
the blade, follow
grind. Grind each cutting
balanced.
WARNING:
the original
2.
Pull up on the belt keeper wire.
b.
Pivot it out away from the drive pulley. See Figure
7-2 inset.
c.
Roll the belt off the transmission
An unbalanced
pulley.
Tip mower on its side with the air filter up to access belt
from underside of mower and remove blade as described
in the previous
section.
Refer to Fig. 7-1.
blade will cause
excessive vibration
when rotating
may cause damage
to mower
causing personal
angle of
edge equally to keep the blade
a.
at high speeds. It
and could break
injury.
16
3.
Press inward
on tab on the engine
the baffle bracket.
baffle to release it from
5.
See Fig. 7-3.
Replace with new belt, making
engine
pulley while
it around
6.
the transmission
Reattach engine
in the previous
7.
pulling
Turn mower
sure belt is firmly
from the other
seated on
side and sliding
pulley.
baffle and reassemble
blade as described
section.
back over and make sure belt is seated on the
transmission
pulley. Pivot the belt keeper wire back into its
operating
position and snap into the slot provided.
8.
Reassemble
front drive cover.
Off-SeasonStorage
The following steps should be taken to prepare your lawn mower
for storage.
Clean and lubricate mower thoroughly as described in the
lubrication instructions.
Do not use a pressure washer or garden
unit.
Coat mower's
cutting
hose to clean your
blade with chassis grease to prevent
rusting.
Refer to engine manual
instructions.
Figure 7-3
4.
Slide belt off of engine
opening
pulley and thread
through
storage
Store mower in a dry, clean area. Do not store next to
corrosive materials, such as fertilizer.
the
in the deck. See Figure 7-4.
for correct engine
When storing any type of power equipment
in a poorly
ventilated or metal storage shed, care should be taken to
rust-proof
equipment,
mower
the equipment.
especially
Using a light oil or silicone, coat the
cables and all moving
parts of your lawn
before storage.
©
Figure
NOTE:When
removing
7-4
belt on units with a 25mm adapter,
the pulleys and washers may also break free from the
crankshaft. Be sure to make note of the orientation
of these
items for reassembly.
SECTION
7 -- SERVICE
17
Troubleshooting
Problem
Engine Fails to start
Cause
1.
Remedy
Blade control disengaged.
1. Engage blade control.
2. Spark plug boot disconnected.
2. Connect wire to spark boot.
3. Fuel tank empty or stale fuel.
3. Fill tank with clean, fresh gasoline.
4. Engine not primed (if equipped
with primer).
4. Prime engine as instructed
section.
in the Operation
5. Faulty spark plug.
5. Clean, adjust gap, or replace.
6. Blocked fuel line.
6. Clean fuel line.
7. Engine flooded.
7. Walta
few minutes to restart, but do not
prime.
8. Fuel valve (if equipped)
9. Engine not choked
1&Burnt
Engine runs erratic
closed.
(if equipped
8. Open fuel valve. See engine manual.
with choke).
fuse. (Electric Start only)
9. Choke engine.
See engine manual.
10.Replace fuse (see Service Section).
1. Spark plug boot loose.
1. Connectand
tighten
spark plug boot.
2. Blocked fuel line or stale fuel.
2. Clean fuel line; fill tank with clean, fresh
gasoline.
3.
Vent in gas cap plugged.
3. Clear vent.
4. Water or dirt in fuel system.
4. Drain fuel tank. Refill with fresh fuel.
5. Dirty air cleaner.
5. Referto
6. Unit running
6. Push CHOKE knob in.
with CHOKE (if equipped)
engine manual.
applied.
Engine overheats
Occasional
skips
1. Engine oil level low.
1. Fill crankcase with proper oil.
2. Air flow restricted.
2. Clean area around
1. Spark plug gap too close.
1. Adjust gap to .030".
1. Spark plug fouled, faulty, or gap too wide.
1. Reset gap to .030" or replace spark plug.
2. D_rty air cleaner.
2. Refer to engine manual.
1. Cutting
1. Tighten
and on top of engine.
(hesitates) at
high speed
Idles poorly
Excesstve Vibration
blade loose or unbalanced.
2. Bent cutting
Mower
will not
blade.
blade and adapter.
2. See an authorized
Balance blade.
service dealer.
1. Wet grass.
1. Do not mow when grass is wet; wait until
later to cut.
2. Excessively high grass.
2.
mulch grass
Mow once at a high cutting
height, then
mow again at desired height or make a
narrower
3. Dull blade.
3.
cutting
path.
Sharpen or replace blade.
Continued
on next page
Troubleshooting
Problem
Uneven cut
Cause
1. Wheels not positioned
Remedy
correctly.
1. Place all four wheels in same height position
(if equipped
Mower will not self propel
with individual
height adjusters).
2. Dull blade.
2. Sharpen or replace blade.
1. Belt not installed properly.
1. Check belt for proper pulley installation and
movement.
2. Debris clogging
2. Stop engine, disconnect spark plug boot,
and clean out debris.
3. Damaged
orworn
drive operation.
belt.
3, Inspectand
replace belt.
19
ModelSeriesV560
8
\
43
28
3\
33
/29
38
ModelSeriesV560
Ref I Part Number
NO,
1
Description
I
746-04206A
Variable
Speed Cable
Ref
No,
Description
23
732-04090A
Torsion Spring - RH
747-04588
Pivot Rod
731-05021A
Transmission
Cover - Yellow
Cover - Gray
2
731-04150C
Rear Baffle 21" Rd.
24
3
710-1241
Screw, 1/4-15 x 1.000
25
4
731-04204±
Deluxe
Bail Cover-
I Part Number
Yellow
731-05250
Transmission
26
710-1650
Shoulder
731_6261
Deluxe
S
747-I161A
Blade Control
27
731-06029
Engine Baffle
6
749-04206A
Upper Handle
28
749-0928A
Lower Handle
7
787-01258A
Cable Mount
29
754-04082A
V-Belt
8
753-05096A
Control
30
756-04161ff
Upper Pulley Half, 25mm x 2.62
9
720-0279
Handle Knob
31
756-04160±±
Lower Pulley Half, 25mm
I0
720-04072
Star Knob
32
787-01593
Baffle Bracket
II
710-1205
Eye Bolt
33
748-04082
Blade Adapter,
25mm
12
746-I130
Control
748-04015A
Blade Adapter,
One Piece
13
710-I174
Carriage
34
736-0447±±
Space Washer
14
726-0240
Cable Tie
35
736-0277±±
Flat Washer
15
714-0104
Cotter Pin
36
710-0896
Scr., 1/4-14 x.625
16
712-0397
Wing Nut
37
710-1257
Hex Screw, 3/8-24 x 2.50
17
664-04027
Grassbag Assembly
- Yardman
38
742-0741
21" Mulching
- Black
39
731-04177
Side Discharge
18
Bail Cover-
Gray
Bracket
Lever Assembly
Cable - 40"
Bolt, 5/16-18 x 2.0
Screw, # 12 -24
Blade
664-04007A
Grassbag Assembly
747-04080A
Grass Bag Frame
40
732-04317
Extension
732-04294
Belt Keeper Wire
Chute
Spring
19
736-0524B
Blade Bell Support
41
20
731-05642
Rear Trailing
42
710-04329
Torx Screw
21
731-05865
Rear Discharge
43
732-04089A
Torsion Spring - LH
22
710-0703
Carriage
Shield
Door
x 2.62
Bolt, 1/4-20
± If Equipped
±± Equipped
with 25mm
Blade Adapter
21
ModelSeriesV560
I0
9
i12
4\
17
17
11
2
26
29
\
\
27
17
19
\
13
14
17
25
24
\
_2
21
_¢
23
WheelTreads
17
18
Pin Bar
Zag Tread
ModelSeries
V560
Ref I Part Number
NO.
1
Description
I
750-04405
Ref
NO,
Slev. Spacer, 1.8" Lg.
2
750-04404
Sleeve Spacer, 9.10" Lg.
20
3
710-0654A
Self-Tapping
21
4
787-01278
21" Deck 3 in 1 SP
Sems Screw
I
I
I
Part
Description
Number
734-04093
Rear Wheel, 12 x 2.125, Zag
710-04531
Screw, 1/4-20 x .390
717-1762
Gear 14T RH FWD RH
717-1761
Gear 14T LH FWD LH
715-0221
Dowel Pin
5
710-0599
TT Screw, 1/4-20 x 0.5
22
6
736-0270
Bell Washer
23
782-7551A
Wheel Dust Cap
7
687-02055
Hinged
24
716-0102
Snap Ring
8
17032A
Chute Deflector
25
736-0474
Flat Washer
9
732-I014
Torsion Spring
26
710-0216
Hex Screw, 3/8-16 x.75
10
747-0710
Hinge Pin
27
736-0447
Wave Washer
II
618-04377A
Transmission
28
687-02347
Bearing Assembly
12
687-02193A
Height Adj. Assembly
- LH
29
720-0426
Adjustment
687- 02194A
Height Adj. Assembly
- RH
30
710-1652
TT Scr. w/Washer,
787-01298
Mulch Plug Assembly
Adapter
Assembly
Knob
1/4-20 x.625
Front Height Adj. Plate - RH
31
738-04266
Shoulder
787-01299
Front Height Adj. Plate - LH
32
687-02335
Pivot Arm Assembly
- RH
14
687-02334
Pivot Plate Assembly
687-02336
Pivot Arm Assembly
- LH
15
732-0706
Front Lever-
RH
33
732-0866
Rear Spring Lever
732-0707
Front Lever-
LH
34
720-0312
Foam Grip
16
782-5002B
Front Baffle
35
687-02280A
Handle Bracket Assembly-
LH
17
712-04065
Flange Lock Nut, 3/8-16
687-02279A
Handle Bracket Assembly-
RH
18
634-04100
13
19
Scr., 500 Dia. x.385
Front Wheel, 8 x 1.8, Pin Bar
36
731-0981Af
Hubcap
734-2042
Front Wheel, 8 x 2.125, Zag
37
736-0182±
Washer, Spring, .500 x 1.00 x .022
734-04089
Rear Wheel, 12 x 1.8, Pin Bar
± If Equipped
23
MANUFACTURER'S
LiMiTED WARRANTY
The limited warranty set forth below is given by MTD LLC with
respect to new merchandise purchased and used in the United States
and/or its territories and possessions, and by MTD Products Limited
with respect to new merchandise purchased and used in Canadaand/
or its territories and possessions (either entity respectively, "MTD").
"MTD" warrants this product (excluding its Normal Wear Parts and
Attachments as described below) against defects in material and
workmanship for a period of two (2) years commencing on the date
of original purchase and will, at its option, repair or replace, free of
charge, any part found to be defective in materials or workmanship.
This limited warranty shall only apply if this product has been
operated and maintained in accordance with the Operator's Manual
furnished with the product, and has not been subject to misuse,
abuse, commercial use, neglect, accident, improper maintenance,
alteration, vandalism, theft, fire, water, or damage because of other
peril or natural disaster. Damage resulting from the installation or use
of any part, accessory or attachment not approved by MTD for use
with the product(s) covered by this manual will void your warranty as
to any resulting damage.
Normal Wear Parts are warranted to be free from defects in material
and workmanship for a period of thirty (30) days from the date of
purchase. Normal wear parts include, but are not limited to items
such as: batteries, belts, blades, blade adapters, tines, grass bags,
wheels, rider deck wheels, seats, snow thrower skid shoes, friction
wheels, shave plates, auger spiral rubber and tires.
Attachments-- MTD warrants attachments for this product against
defects in material and workmanship for a period of one (1) year,
commencing on the date of the attachment's original purchase or
lease. Attachments include, but are not limited to items such as:
grass collectors and mulch kits.
HOWTO OBTAINSERVICE:Warranty service is available, WITH
PROOFOF PURCHASE,through your local authorized service dealer.
To locate the dealer in your area:
In the U.S.A.
Check your Yellow Pages, or contact MTD LLC at RO. Box 361131,
Cleveland, Ohio 44136-0019, or call 1-800-800-7310, 1-330-2204683 or log on to our Web site at www.mtdproducts.com.
In Canada
Contact MTD Products Limited, Kitchener, ON N2G4J1, or call 1-800668-1238 or log on to our Web site at www.mtdcanada.com.
This limited warranty does not provide coverage in the following
cases:
a. The engine or component parts thereof. These items may carry a
separate manufacturer's warranty. Refer to applicable manufacturer's warranty for terms and conditions.
b. Log splitter pumps, valves, and cylinders havea separate oneyear warranty.
FOR
c. Routine maintenance items such as lubricants, filters, blade
sharpening, tune-ups, brake adjustments, clutch adjustments,
deck adjustments, and normal deterioration of the exterior finish
due to use or exposure.
d. Service completed by someone other than an authorized service
dealer.
e. MTD does not extend any warranty for products sold or exported
outside of the United States and/or Canada,and their respective
possessions and territories, except those sold through MTD's
authorized channels of export distribution.
f. Replacement parts that are not genuine MTD parts.
g. Transportation charges and service calls.
h. MTD does not warrant this product for commercial use.
No implied warranty, including any implied warranty of
merchantability of fitness for a particular purpose, applies after
the applicable period of express written warranty above as to the
parts as identified. No other express warranty, whether written or
oral, except as mentioned above, given by any person or entity,
including a dealer or retailer, with respect to any product, shall
bind MTD. Duringthe period of the warranty, the exclusive remedy
is repair or replacement of the product as set forth above.
The provisions as set forth in this warranty provide the sole and
exclusive remedy arising from the sale. MTD shall not be liable
for incidental or consequential loss or damage including, without
limitation, expenses incurred for substitute or replacement lawn
care services or for rental expenses to temporarily replace a
warranted product.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts, so the above exclusions or limitations may not apply
to you.
In no event shaft recovery of any kind be greater than the amount of
the purchase price of the product sold. Alteration of safety features of
the product shall void this warranty. You assume the risk and liability
for loss, damage, or injuryto you and your property and/or to others
and their property arising out of the misuse or inability to use the
product.
This limited warranty shall not extend to anyone other than the
original purchaser or to the person for whom it was purchased as a
gift.
HOWSTATELAW RELATESTO THIS WARRANTY: This limited
warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
IMPORTANT: Owner must present Original Proof of Purchase to
obtain warranty coverage.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136=0019; Phone: 1=800=800=7310, 1=330=220=4683
MTD Canada Limited = KITCHENER, ON N2G 4J1; Phone 1=800=668=1238
GDOC-lO0015 REV.B