Sharp Notevision XG-MB67X Setup guide Download

Transcript
Quick Start
This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
3
8
STANDBY/ON
button
8 STANDBY button
6
INPUT button
4
ENTER button
3 ON button
7
Adjustment buttons
(P/R/O/Q)
7 KEYSTONE button
7
KEYSTONE
button
4 ENTER button
7
4
Focus ring
4
HEIGHT
ADJUST lever
Adjustment buttons
(P/R/O/Q)
6 INPUT 1 button
1. Place the projector facing a wall or a screen
_P. 18
2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
When connecting equipment other than a computer, see
pages 24 and 25.
_PP. 21–27
3. Remove the lens cap and turn the projector on
On the projector
On the remote control
_P. 28
16
XG-MB67XL_EN_CD_e
16
06.9.11, 6:45 AM