Download Sharp Notevision XG-MB67X Setup guide

Transcript
When connecting to the LAN terminal using a LAN cable
TX/RX LED (yellow)
Illuminates when transmitting/receiving data.
Hub
or
Computer
LINK LED (green)
Illuminates when linked.
* To ensure safety, do not
connect the LAN terminal
with any cables that may
cause excessive voltage
such as a telephone line.
LAN cable (Category 5 type,
commercially available)
To LAN terminal
Connections
Note
• When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially
available).
• When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially
available).
Connecting the Power Cord
Plug the supplied power cord into the
AC socket on the rear of the projector.
Then plug into AC outlet.
Supplied
accessory
Power cord
AC socket
To AC outlet
27
XG-MB67XL_EN_CD_g
27
06.9.11, 6:46 AM