Download Sharp Notevision XG-MB67X Setup guide

Transcript
Menu operation n Page 40
2 Adjusting the Image
Adjustment
Items
O button
Q button
4 Progressive
Selectable
items
Description
Contrast
For less
contrast.
For more
contrast.
Useful to display fast-moving images
2D
Progressive such as sports.
Bright
For less
brightness.
For more
brightness.
Useful to display relatively slow3D
Progressive moving images such as drama and
documentary more clearly.
Red*1
For weaker red.
For stronger red.
Blue*1
For weaker
blue.
For stronger
blue.
Color*2
For less color
intensity.
For more color
intensity.
Tint*2 *3
For making skin
tones purplish.
For making skin
tones greenish.
Sharp*2
For less
sharpness.
For more
sharpness.
Bright Boost*1
For high fidelity
color reproduction.
For more
vividness.
*1 Not adjustable/selectable when selecting
“sRGB”.
*2 Not displayed in the RGB input mode.
*3 “Tone” will appear on the menu screen only when
PAL or SECAM signals are input (including when
forcibly changed to those input signals). There is
basically no need to adjust “Tone”, but you can
adjust the picture tone with this adjustment when
inputting PAL or SECAM signals .
Note
• “Bright Boost” and “CLR Temp” cannot be set
when “sRGB” is selected.
• To reset all adjustment items, select “Reset”
and press hENTER.
Selectable
items
5500K
6500K
7500K
8500K
9300K
10500K
Description
For lower color temperature for
warmer, reddish incandescent-like
images.
P
Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhancement to progressive mode images.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progressive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Note
• In NTSC or PAL60Hz, even if the 3D Progressive mode has been set, the three-two pull
down enhancement will be enabled automatically when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are directly displayed so that 2D Progressive, 3D
Progressive and Film Mode cannot be selected.
5 Lamp Setting
Fan
sound
Power
consumption
(When using
AC 100V)
Approx.
80%
Low
280W
Approx.
3,000
hours
100%
Normal
350W
Approx.
2,000
hours
SelectBrightable
ness
items
Eco +
Quiet
Bright
R
For higher color temperature for
cooler, bluish, fluorescent-like images.
Note
• Values on “CLR Temp” are only for general
standard purposes.
Lamp Life
Useful
Features
3 Adjusting the Color
Temperature
Film Mode
Note
• When “Lamp Setting” is set to “Eco+Quiet”,
the power consumption will decrease and the
lamp life will extend. (Projection brightness
decreases approximately 20%.)
43
XG-MB67XL_EN_CD_j
43
06.9.11, 6:50 AM