Sharp Notevision XG-MB67X Setup guide Download

Transcript
Adjusting the Projector Function (“PRJ - ADJ” menu) (Continued)
Menu operation n Page 40
3
Press the 4 buttons on the remote
control or on the projector to enter the new keycode in “New
Code”.
Note
• You can not use the following buttons for
keycode:
• S STANDBY/ON
• f ON
• e STANDBY
• h ENTER
• l RETURN
• B MENU/HELP
• System lock function recognizes each
button on the remote control or on the
projector as an individual button, even
if they share the same button name. If
you used the buttons on the projector
in setting your keycode, the keycode
cannot be canceled with the remote
control.
PRJ - ADJ
Setting the System Lock
Use this function to lock the operation
buttons on the projector.
a Locking the Operation Buttons
Hold down T ENTER on the projector for
about 5 seconds while the projector is being
turned on.
ROn-screen Display
• The keylock function does not affect the operation with the remote control buttons.
• You cannot use the keylock function while the
projector is warming up.
a Taking the Keylock off
Hold down T ENTER on the projector for
about 5 seconds.
ROn-screen Display
Old Code
New Code
Reconfirm
4
Locking the Operation
Buttons on the Projector
(Keylock Function)
****
– – – –
– – – –
Enter the same keycode in “Reconfirm”.
Note
• When the projector is in standby mode, you
can release the keylock by holding down
T ENTER and S STANDBY/ON on the projector simultaneously for about 5 seconds.
Info
To cancel the keycode that you have already
set
• Press R on the projector for four times in steps
2 and 3 above.
When the System Lock is set
• When System Lock is set, the keycode input
screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.
• Keylock does not function while the projector
is: displaying the “Setup Guide” or “Menu”
screens, in standby mode, warming up,
changing input signals, operating “Auto Sync”
function, in “FREEZE” mode or on the “System Lock” screen during warming up.
Input screen for keycode
– – – –
System Lock
48
XG-MB67XL_EN_CD_k
48
06.9.11, 6:50 AM