Download Sharp DV-HR350S Operating instructions
Transcript
Before you start Connections VCR/DVD RECORDER COMBINATION Getting started DV-RW340U DV-RW350U OPERATION MANUAL Recording Please read this Operation Manual carefully before using your VCR/DVD RECORDER COMBINATION. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Playing discs The region number for this unit is 1. Editing 1 Changing the SETUP menu • Remote control (9HSNB114UD) with two “AA” size batteries • Round Coaxial cable • Audio/Video cables • Operation Manual (9HSWPZ0901TM003) (9HSWX1E56B5-001) (9HS1VMN20224) • QUICK USE GUIDE (9HS1VMN20237) VCR functions Supplied Accessory Operation Manual Others Español Before you start Precautions For future reference, record the model and serial numbers (located on the rear of the Unit) in the space provided. Model No.: Serial No.: WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITAR LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit. “WARNING—FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.” This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá. CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. AS THE LASER BEAM USED IN THIS UNIT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. 2 Before you start Important Safeguards information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig.A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD WIRE GROUND CLAMP Connections ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT NEC – NATIONAL ELECTRICAL CODE S2898A GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) Playing discs Editing Changing the SETUP menu VCR functions Others Español 3 Recording 15. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 16. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 18. Object and Liquid Entry - Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. 19. Servicing - Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Damage Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or damaged in any way. f.When the video product exhibits a distinct change in performance this indicates a need for service. 21. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 22. Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. 23. Heat - This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Getting started 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6.Attachments - Do not use attachments not recommended by the video product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8.Accessories - Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. 9. Transportation - A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 10.Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface.This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 11. Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 12. Grounding or Polarization - This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way.This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 14. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides Before you start Precautions (cont’d) Before you start Precautions (cont’d) Location and Handling Location and Handling • Do not cover or place the unit in enclosed spaces to prevent excessive temperature build up. • Do not place the unit in direct sunlight, or near heat sources. • Depending on the use environment, the temperature of the unit may increase slightly.This is not a malfunction. • Keep the unit away from strong magnetic objects. • Do not stand the unit vertically. Install the unit in a horizontal and stable position. • Do not place any object containing water or other liquids on the unit. In the event that liquid should enter the cabinet, unplug the unit immediately and contact the retailer or service centre approved by SHARP immediately. • Do not remove the unit cabinet.Touching parts inside the cabinet could result in electric shock and/ or damage to the unit. For service and adjustment inside the cabinet, call a qualified dealer or service centre approved by SHARP. Nonuse Periods Location and Handling • When the unit is not being used, switch the unit to the Standby mode. • When left unused for a long period of time, the unit should be unplugged from the household AC outlet. • Do not place the unit in direct sunlight, or near heat sources. Copy Protection This Unit supports Macrovision copy protection. On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using this unit, the copy protection code prevents the DVD or videotape copy from playing normally. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Notice for progressive scan outputs Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer service center. No Fingers or Other Objects Inside Do not put your fingers or objects on the disc tray or in the cassette compartment. Warning of Dew Formation Moisture may form inside the unit under the following conditions: • Immediately after a heater is turned on. • In a steamy or humid room. • When the unit is suddenly moved from a cold to warm environment. If moisture forms inside this unit, it may not operate properly or damage the videotape. In such case, turn on the power and wait for more than two hours for the moisture to evaporate. Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. 4 Before you start Before you start Precautions (cont’d) Others It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever necessary. Connections “Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985, 5,740,317, 5,777,992, 5,878,080, or 5,960,037.” A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. Maintenance Recording Playing discs Editing Changing the SETUP menu SERVICING 1. Please refer to relevant topics in the Troubleshooting on pages 97-100 before returning the product. 2. Do not attempt to service this Unit yourself. Instead, unplug it and contact a Sharp Authorized Service Center for inspection. (See CONSUMER LIMITED WARRANTY at the end of this manual.) 3. Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shock, or other hazards. 4. Following any service or repair, be sure the service technician performs safety checks to certify that this Unit is in safe operating order. CLEANING THE CABINET ¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. CLEANING DISCS ¡When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center out. Do not wipe in a circular motion. ¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. RECOMMENDED MEASURES FOR OPTIMUM PICTURE EXCELLENCE This Unit is a precision device constructed using extremely accurate technology. ¡The disc cannot be played if the disc drive component is worn out or if the internal pick up lens is dirty. ¡If this unit still does not perform properly although you refer to the relevant sections and to Troubleshooting on pages 97-100, the laser optical pickup unit may be dirty. Consult a Sharp Authorized Service Center for inspection and cleaning of the laser optical pickup unit. DISC HANDLING ¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. ¡Always store the disc in its protective case when it is not used. AUTO HEAD CLEANING ¡Automatically cleans video heads as you insert or remove a videotape, so you can see a clear picture. ¡Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn videotape can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned. 1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2. If a Video Head Cleaner does not solve the problem, please call our help line mentioned on page 103 to locate a Sharp Authorized Service Center. Getting started Make your contribution to the environment!!! • Used up batteries do not belong in the dust bin. • You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details. VCR functions Others Español 5 Before you start Table of contents Before you start . . . . . . . . . . . . . . . . . . .2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .6 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Functional overview . . . . . . . . . . . . . . . . . . . . . . .8 Installing batteries in the remote control . . . . . . . . .10 Using a remote control . . . . . . . . . . . . . . . . . . . . . .10 The VCR/DVD recorder Switching . . . . . . . . . . . . . .10 SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . .11 DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Connections . . . . . . . . . . . . . . . . . . . . .14 Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .14 Connection to a cable box or satellite box . . . .15 Connection to an Audio System . . . . . . . . . . . . .16 Getting started . . . . . . . . . . . . . . . . . . .17 Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .17 Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .19 Getting channels automatically . . . . . . . . . . . . . . . . .19 Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .20 Selecting the TV stereo or SAP . . . . . . . . . . . . .21 Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . .22 Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .22 Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .23 Setting the daylight saving time . . . . . . . . . . . . . . . .25 Selecting the TV aspect ratio . . . . . . . . . . . . . . .26 Recording . . . . . . . . . . . . . . . . . . . . . . .27 Information on DVD recording . . . . . . . . . . . . . .27 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Restrictions on recording . . . . . . . . . . . . . . . . . . . .27 Information on copy control . . . . . . . . . . . . . . . . . .28 Making discs playable in other DVD player (Finalize) 28 Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .29 Choosing the recording format of a blank disc . . . .29 Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30 Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31 Checking the recording picture quality . . . . . . . . . .32 One-touch timer recording . . . . . . . . . . . . . . . .33 Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34 Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36 Settings for an external source . . . . . . . . . . . . . .37 Connection to an external source . . . . . . . . . . . . . .37 Recording from an external source . . . . . . . . . . . . .38 Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .41 Setting a disc to protect . . . . . . . . . . . . . . . . . . .42 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .52 Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Repeat/Random/Program play . . . . . . . . . . . . . .54 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Selecting the format of audio and video . . . . . .56 Switching audio soundtrack . . . . . . . . . . . . . . . . . . .56 Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .57 Switching camera angles . . . . . . . . . . . . . . . . . . . . . .58 Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .58 Editing . . . . . . . . . . . . . . . . . . . . . . . . .59 Information on disc editing . . . . . . . . . . . . . . . . .59 Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .59 Editing discs in Video mode . . . . . . . . . . . . . . . . . . .59 Editing discs in VR mode . . . . . . . . . . . . . . . . . . . . .60 Editing DVD-RW discs in Video mode . . . . . . . .61 Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Putting names on titles . . . . . . . . . . . . . . . . . . . . . .62 Setting or clearing chapter markers . . . . . . . . . . . . .64 Editing DVD-RW discs in VR mode (Original) . .65 Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .66 Putting names on titles . . . . . . . . . . . . . . . . . . . . . .67 Setting or clearing chapter markers . . . . . . . . . . . . .69 Setting pictures for thumbnails . . . . . . . . . . . . . . . . .70 Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .72 Releasing titles from protecting . . . . . . . . . . . . . . . .73 Editing DVD-RW discs in VR mode (Playlist) . . .74 Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .75 Putting names on titles . . . . . . . . . . . . . . . . . . . . . .76 Setting or clearing chapter markers . . . . . . . . . . . . .78 Setting pictures for thumbnails . . . . . . . . . . . . . . . . .79 Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .81 Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .82 Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .83 Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83 Putting names on titles . . . . . . . . . . . . . . . . . . . . . .84 Changing the SETUP menu . . . . . . . . .85 Tour of the SETUP menu . . . . Language setting . . . . . . . . . . . Display setting . . . . . . . . . . . . . Audio setting . . . . . . . . . . . . . . Settings for Parental lock level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 .86 .88 .90 .92 Playing discs . . . . . . . . . . . . . . . . . . . . .43 VCR functions . . . . . . . . . . . . . . . . . . .94 Information on DVD play . . . . . . . . . . . . . . . . . .43 Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Playing discs using the disc menu . . . . . . . . . . . . . . .46 Playing discs using the title menu . . . . . . . . . . . . . . .47 Special playback . . . . . . . . . . . . . . . . . . . . . . . . .48 Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .48 Skipping TV commercials during play . . . . . . . . . . . . .49 Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .50 Slow forward / Slow reverse play . . . . . . . . . . . . . . .50 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 Recording and One-touch timer recording . . . .94 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 One-touch timer recording . . . . . . . . . . . . . . . . . . . .95 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 Other operations . . . . . . . . . . . . . . . . . . . . . . . .96 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .97 RF converter output . . . . . . . . . . . . . . . . . . . . .100 Language code . . . . . . . . . . . . . . . . . . . . . . . . .101 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Service Information (For the U.S.) . . . . . . . . . .103 6 Español . . . . . . . . . . . . . . . . . . . . . . . .104 Others . . . . . . . . . . . . . . . . . . . . . . . . .97 Before you start Before you start Features This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record to DVD discs and edit them after that.The following features are offered with this unit. DVD mode Setting/Clearing chapter markers: You can easily add chapter markers anywhere in your recordings for easy editing. (VR mode) Making your own Playlist: With the original remains as it is, you can edit titles on Various playlist as you prefer. Putting names on titles. Setting pictures for thumbnails. Setting/clearing chapter markers. Deleting parts of titles, etc. Protecting titles: To avoid editing or erasing titles, the protect function is useful when it is ON in the original list. Symbol in this operation manual Many functions of this unit are depending on the disc type or the recording mode. To specify for what disc type or recording mode each function is, we put the following symbols at the beginning of each item to operate. Description Symbol Available to DVD Video discs DVD-V Video Available to DVD-RW in Video mode DVD-RW VR DVD-RW Available to DVD-RW in VR mode DVD-R Available to DVD-R discs Video DVD+RW Available to DVD+RW in Video mode DVD+R Available to DVD+R discs CD Available to Audio CDs MP3 VCR DVD First: (Press:) VCR Available to CD-RW/R discs with MP3 files Available to VHS tapes Use only tapes marked with this unit. Indicates that you need to select the DVD mode by pressing DVD button on the remote control before proceeding next step. Indicates that you need to select the VCR mode by pressing VCR button on the remote control before proceeding next step. 7 Others Español First: (Press:) VCR functions VCR mode Quick search for what you want to watch: You can easily find the part you want to watch using the Index search/Time search functions.An index mark will be assigned at the beginning of each recordings you make. For Time search function, you can go to a specific point on a videotape by entering the exact amount of time you wish to skip. Progressive Scan system Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals. Changing the SETUP menu DVD mode Theater surround sound in your home: When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital or DTS, you are allowed to experience the theater surround sound from discs with surround sound system. Quick search for what you want to watch: You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter, or time. Start to play from Original and Playlist (VR mode): Title playing is available from either an Original list or Playlist. Others Editing Play DVD mode Available for playing discs recorded in Video mode on a regular DVD player (Video mode): Discs recorded in the Video mode can be played on regular DVD players, including computer DVD drives compatible with DVD-Video playback*.You will need to finalize the discs recorded in Video mode to play in other DVD players. * DVD-Video Format (Video mode) is a new format for recording on DVD-RW/R discs that was approved by the DVD Forum in 2000. Adoption of this format is optional for manufactures of DVD playback devices and there are DVD-Video players, DVDROM drives or other DVD playback devices that do not play DVD-RW/R discs recorded in the DVD-Video Format. Playing discs DVD mode REC MONITOR: You can confirm the picture quality for recording in the current recording speed which you set. If you want to change the recording speed, press REC MODE/REC SPEED button to set the desired recording mode. Automatic Chapter marker setting: Chapter markers will be put on recordings as you set in SETUP menu before attempting to record. Automatic Title menu making: The unit makes title menus automatically when finalizing the disc which are recorded in Video mode. Automatic PLAYLIST making (VR mode): A Playlist will be prepared from an Original list, so that you can edit titles in a Playlist as you prefer. An Original list is kept as it is. Compatibility Recording DVD mode VCR mode This unit is compatible with both DVD-RW, which is rewritable repeatedly, and DVD-R, which is available for recording once. Also, this unit allows you to record to the videotape. You can choose either one for your convenience. Up to 8 programs recording: You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. One-touch timer recording: You can easily set a recording time as you prefer. Every time the REC/OTR button on the remote control or on the front panel pressed during recording, the recording time will be increased by 30 minutes up to 8 hours.The recording automatically stops when the recording time you set is reached. Dubbing mode: You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if the DVD disc or a videotape is not copy protected. You cannot record on a videotape when its record tab is removed. Getting started Editing Connections Recording Before you start Functional overview 3* 4 5 2 Front Panel 6 OPEN/CLOSE (*) The unit can also be turned on by pressing these buttons. POWER STOP/EJECT REW F.FWD PLAY VCR STOP DVD PLAY S-INPUT VIDEO L(MONO) - AUDIO - R REC/OTR REC/OTR CHANNEL (TRACKING) 1 20 21 19 18 17 16 1. POWER button / indicator (DVD/VCR) Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode. Press to cancel the timer standby mode, then turn the unit on. Red LED lights up when power is on. 2. Cassette compartment (VCR) Insert a videotape here. 3. A OPEN/CLOSE button (DVD)* Press to open or close the disc tray. 4. VCR indicator This indicator appears when the VCR output mode is selected. 5. DVD indicator This indicator appears when the DVD output mode is selected. 6. Disc tray (DVD) Place a disc when open. 7. AUDIO INPUT jacks (LINE2) (DVD/VCR) Use to connect external equipment with standard audio cables. 8. VIDEO INPUT jack (LINE2) (DVD/VCR) Use to connect external equipment with a standard video cable. 9. S-VIDEO INPUT jack (LINE2) (DVD only) Use to connect the S-Video output of external equipment with an S-Video cable. 10. REC/OTR button (DVD) Press once to start recording. Press repeatedly to start a One-Touch timer Recording. 11. PLAY button (DVD)* Press to start or resume play. DUBBING OUTPUT SELECT 15 14 13 12* 11* 10 9 8 7 12. STOP button (DVD)* Press to stop playback or recording. Press to stop the proceeding timer recording in DVD. 13. OUTPUT SELECT button (DVD/VCR) Press to select the component you wish to operate. 14. DUBBING button (DVD/VCR) Press to start VCR to DVD (DVD to VCR) duplication which you set in the SETUP menu. 15. CHANNEL L / K button (DVD/VCR) Press to change the channel up and down. 16. PLAY button (VCR) Press to start playback. 17. Remote control sensor (DVD/VCR) Receive signals from your remote control so that you can control the unit from a distance. 18. REC/OTR button (VCR) Press once to start a recording. Press repeatedly to start a One-Touch timer Recording. 19. F.FWD button (VCR) Press to rapidly advance the videotape, or view the picture rapidly in forward during playback. (Forward Search) 20. REW button (VCR) Press to rewind the videotape, or to view the picture rapidly in reverse during the playback mode. (Rewind Search) 21. STOP/EJECT button (VCR) EJECTbutton-Press to remove the videotape from the cassette compartment when the power is on or off. STOP button-Press to stop videotape playback. Press to stop the proceeding timer recording in VCR. 1 2 3 4 5 6 Rear Panel DIGITAL AUDIO AUDIO OUT OUT DVD S-VIDEO COMPONENT VIDEO OUT Y L COAXIAL PB/CB IN R DVD/VCR AUDIO IN AUDIO OUT ANTENNA IN L L R R VIDEO IN VIDEO OUT OUT PR/CR • These jacks are OUT useful only in DVD mode. 8. VIDEO OUTPUT jack (DVD/VCR) Use to connect a TV monitor, AV receiver or other equipment with a standard video cable. 9. VIDEO INPUT jack (LINE1) (DVD/VCR) Use to connect external equipment with a standard video cable. 10. S-VIDEO OUTPUT jack (DVD only) Use to connect the S-Video input of a TV monitor, AV receiver or other equipment with an S-Video cable. 11. AUDIO OUTPUT jacks (DVD only) Use to connect a TV monitor, AV receiver or other equipment with standard audio cables. 12. COAXIAL DIGITAL AUDIO OUTPUT jack (DVD only) Use to connect an AV receiver, Dolby Digital decoder or other equipment with a coaxial digital input jack with a digital coaxial cable. 12 11 10 1. 2. 3. 4. 5. 6. 7. AC Power Cord (DVD/VCR) Connect to a standard AC outlet to supply power to this unit. S-VIDEO INPUT jack (LINE1) (DVD only) Use to connect the S-Video output of external equipment with an S-Video cable. COMPONENT VIDEO OUTPUT jacks (DVD only) Use to connect a TV monitor with component video inputs with component video cables. AUDIO INPUT jacks (LINE1) (DVD/VCR) Use to connect external equipment with standard audio cables. AUDIO OUTPUT jacks (DVD/VCR) Use to connect a TV monitor, AV receiver or other equipment with standard audio cables. TV ANTENNA IN jack (DVD/VCR) Use to connect an antenna. TV ANTENNA OUT jack (DVD/VCR) Use to connect an antenna cable to pass the signal from the TV ANTENNA IN to your TV monitor. 9 8 7 Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma8 nent damage to the unit. Before you start Remote Control POWER REC MODE REC SPEED AUDIO ABC DEF 2 3 OPEN/CLOSE 1 .@/: 1 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 15* 16 CH VIDEO/TV SLOW SPACE 0 4 3 DISPLAY 12 8 9 11 19 PAUSE PLAY 23 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE 25 CM SKIP RETURN SKIP SKIP 27 28 29 20 22* 24* 26 30 13 Editing Changing the SETUP menu VCR functions Others Español 9 Playing discs 1. POWER button (DVD/VCR) Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode. Press to cancel the timer standby mode, then turn the unit on. 2. Number buttons (DVD/VCR) Press to select channel numbers. Press to select a title/chapter/track on display or a TV channel. Also press to enter values for the settings in the SETUP menu. 3. DISPLAY button (DVD/VCR) Press to display or change the on-screen display. 4. VCR button Press to activate the remote control in VCR mode. (Refer to page 10) Press to select the VCR output mode. 5. E button (DVD/VCR) • DVD mode During playback, press to fast reverse. Or when playback is paused, press to play slow reverse. • VCR mode Press to rewind the videotape or to view the picture rapidly in reverse during the playback mode. 6. REC/OTR button (DVD/VCR) Press once to start a recording. Press repeatedly to start a One-Touch timer Recording. Recording (*) In DVD mode, the unit can also be turned on by pressing these buttons. 18. VIDEO/TV button (DVD/VCR) Press to select VIDEO or TV position. 19. SLOW button (VCR) During playback, press to view the videotape in slow motion. 20. PAUSE F button (DVD/VCR) Press to pause play or recording. 21. DVD button Press to activate the remote control in DVD mode. (Refer to page 10) Press to select the DVD output mode. 22. PLAY B button * (DVD/VCR) Press to start or resume play. 23. D button (DVD/VCR) • DVD mode During playback, press to fast forward. Or when playback is paused, press to play slow forward. • VCR mode Press to rapidly advance the videotape or view the picture rapidly in forward during playback. 24. STOP C button * (DVD/VCR) Press to stop playback or recording. 25. TIMER PROG. button (DVD/VCR) Press to display the timer program setting menu. 26. ENTER button (DVD/VCR) Press to confirm or select menu items. 27. K / L / { / B buttons (DVD/VCR) Press to select items or settings. 28. RETURN button (DVD/VCR) Press to return to the previously displayed menu screen. 29. ZOOM button (DVD) During playback, press to enlarge the picture on the screen. 30. SKIP H button (DVD) During playback, press to skip to the previous chapter or track. Or when playback is paused, press to play reverse step by step. SKIP G button (DVD) During playback, press to skip to the next chapter or track. Or when playback is paused, press to play forward step by step. Getting started 10 6 DVD 18 21 5 7 VCR 17 7. SETUP button (DVD/VCR) Press to display the setup menu. During DVD playback, press and hold for more than 3 seconds to switch to the progressive scanning mode or the interlace mode. 8. REC MONITOR button (DVD) Press to check the video signal to be recorded before attempting. 9. MENU/LIST button (DVD) Press to display the Disc menu. Press to change ORIGINAL and PLAYLIST on the TV screen. (VR mode only) 10. TOP MENU button (DVD) Press to display the top menu. 11. CLEAR/C.RESET button (DVD/VCR) • DVD mode Press to clear the password once entered, to cancel the programming for CD, to clear the selecting marker number in the marker setup mode or to clear the program once entered in the timer recording setting mode,etc. • VCR mode Press to reset the tape counter. 12. SEARCH MODE button (VCR) Press to call up the index or time search menu. 13. CM SKIP button (DVD) During playback, press to skip 30 seconds. 14. REC MODE/REC SPEED button (DVD/VCR) Press to switch the recording speed. 15. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray. 16. AUDIO button (VCR) During playback a HiFi videotape, press to change the AUDIO OUT setting “HiFi” and “MONO”. 17. CH K / L buttons (DVD/VCR) • DVD mode Press to change the channel up and down. • VCR mode Press to change the channel up and down. Press to adjust the tracking during playback or in slow motion of the videotape. Also while playback is in still mode, you can adjust the picture blurred vertically. Connections 2 14 Before you start Functional overview (cont’d) Before you start Functional overview (cont’d) Installing batteries in the remote control Using a remote control Install two “AA” size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Keep in mind the following when using the remote control: • Make sure that there is no obstacle between the remote control and the remote sensor of the unit. • Use within the operating range and angle as shown. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other equipment located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. 1 2 3 Within about 23feet (7m) POW ER STOP/E JECT PLAY REW F.FWD OPEN /CLOS E REC/O TR VCR CHAN (TRAC NEL DVD KING) STOP DUBB ING OUTPU T SELEC T PLAY REC/O TR 60˚ Remote control REC PAUS k E h REV PLA B Y P U/ MEN AL GIN STOC G TOP ORI PLA T NU LIS ME Y R D g FW K ENTE IP P SK H Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of batteries together, although they may look similar, different batteries may have different voltages. • Make sure that the plus and minus ends of each battery match the indications in the battery compartment. • Remove batteries from equipment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. The VCR/DVD recorder Switching Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with the OUTPUT SELECT button. OUTPUT SELECT button VCR MODE Press the VCR button on the remote control. (Verify that the VCR indicator is lit.) OPEN/CLOSE POWER STOP/EJECT REW F.FWD PLAY VCR DVD STOP POWER PLAY REC MODE REC SPEED AUDIO ABC DEF CHANNEL (TRACKING) DUBBING OUTPUT SELECT .@/: 1 2 GHI DVD MODE Press the DVD button on the remote control. (Verify that the DVD indicator is lit.) VCR button DVD button 10 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CH VIDEO/TV SLOW 0 DVD DISPLAY VCR REC/OTR SETUP PAUSE PLAY VCR DVD STOP DVD indicator Note • Pressing only the OUTPUT SELECT button on the front panel DOES NOT switch the mode of the remote control.You MUST select the correct mode on the remote control. • Pressing the SETUP or the TIMER PROG. button switches the unit to the DVD mode. OPEN/CLOSE REC/OTR REC/OTR OUTPUT SELECT TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM VCR indicator SEARCH MODE RETURN SKIP CM SKIP DVD/VCR RECORDER SKIP Before you start Before you start Functional overview (cont’d) Guide to Displays on screen menu This unit uses the following on screen menu for most operations: SETUP/DISC/CD menu, Title list, and DISPLAY menu.They allow you to change the playing status of disc during play. The DISPLAY menu also gives you information on the status of the disc or a videotape. Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing { / B buttons.Then, press ENTER button to display each menu. These menus provide entries to all main functions of the unit. Disc Setting 1 2 3 4 5 6 CD Playback Mode Disc CD Playback Mode Edit Random Play Format Program Play Playing discs Setup Recording Setup Menu “CD” is available only when an Audio CD disc or a CD-RW/R disc with MP3 files is inserted into the unit. Finalize Disc Protect OFF ON 1 2 3 4 Getting started “DISC” is available only when a DVD-RW/R disc is inserted into the unit. When a DVD-Video disc (commercially available), new DVD-R disc, or the finalized DVD-R disc is inserted into the unit, you cannot select “DISC”. “SETUP” is available only in the Stop mode. Connections SETUP/DISC/CD menu 1 2 Playback Setting 3. Display: To set up the OSD screen and the front display of the unit as you prefer. 6. Channel: To adjust the channel setting of the unit as you prefer. 11 Others Español 5. Clock: To set up the clock of the unit as you need. 2. Program Play(Audio CD only): To activate the programmed playback feature. VCR functions 4. Select Video: To choose a line input to record to DVD discs from other video equipment. 1. Random Play: To activate the random playback feature. Changing the SETUP menu 2. Recording: To set up the unit to record to discs or videotapes as you prefer. 1. Edit: Turns on a title list, (When a disc with VR mode is inserted, 'Original' or 'PlayList' is available.), which shows the recorded titles on the disc. 2. Format (DVD-RW only): Allows you to erase all of the recorded content on the disc. The disc will be completely blank. • Erased content cannot be called back. Please make sure before you format a disc. • A DVD-RW disc formatted with this unit cannot be used in other DVD recorders without any recording using this unit. • If you want to use a disc only formatted with this unit on another DVD recorder, you have to re-format the disc on that recorder. 3. Finalize: Allows you to finalize a disc containing recorded titles. 4. Disc Protect (VR mode only) : Allows you to protect a disc from accidental editing or recording. Editing 1. Playback: To set up the unit to play discs as you prefer. Before you start Functional overview (cont’d) DISPLAY menu DVD mode First: DVD Press DISPLAY button to call up the display menu.This menu will give you the information on the playing disc. Some operations are available while disc is playing. Details are on page 43. 4 1 1 1 00:00:00 DVD-RW Video mode SP 1:25 Rem. 5 CH 1 STEREO 2 3 1. Indicates a disc type and a format mode. Note: In some descriptions on this manual, only one disc type is indicated as an example. 2. Indicates a recording mode and possible recording time. 3. Indicates a current channel number and an audio status of the program. 4. Indicates a title number, chapter number and the time elapsed of disc play. 5. Each icon means: : Search :Audio : Subtitle :Angle (except VR mode) : Repeat : Marker : Noise Reduction : Zoom VCR mode First: VCR Press DISPLAY button to call up the display menu. 1 2 CH21 STEREO 12 SP 0:00:00 HIFI 3 4 5 1. Playback status of the current videotape. 2. Indicates a current channel number and an audio status of the program. 3. Indicates a recording speed only five seconds. 4. Indicates a Tape Counter. 5. Audio status of the current videotape. Before you start Before you start Functional overview (cont’d) Front Panel Display Guide 4 2 Connections 1 3 7 6 3. Recording mode/speed Indicates the recording speed of the disc or a videotape. 4. Title/Track and Chapter mark : Appears when indicating a title/track number. : Appears when indicating a chapter number. 5. Displays the following • Playing time / remaining time • Current title / chapter / track number • Recording time • Clock • Channel number • VCR tape counter • Remaining time for a onetouch timer recording 7. : Appears in the afternoon with the clock displaying. Editing 6. Playing discs : Appears when the progressive scan system is activated. Display message Appears when the disc tray is closing. Appears when data is being recorded on a disc. 13 Others Español Appears when a disc is loaded on the disc tray. VCR functions Appears when the disc tray is opening. Changing the SETUP menu 2. Disc type and Current status of the unit : Appears when an audio CD or a disc with MP3 files is inserted in the disc tray. : Appears when a DVD disc is inserted in the disc tray. Appears when the timer recording is proceeding in DVD. Appears when DVD is in the timer recording standby mode. : Appears when a DVD-R disc is inserted in the disc tray. : Appears when a DVDRW disc is inserted in the disc tray. : Appears when the timer recording is proceeding in VCR. Appears when VCR is in the timer recording standby mode. : Appears during VCR to DVD duplication process. : Appears during DVD to VCR duplication process. Recording 1. Current status of the unit : Appears when a disc or a videotape play is paused. : Appears when playing a disc or a videotape. : Appears when the timer programming has been set and is proceeding. : Appears during recording process. : Appears during repeat play. : Appears when a videotape is in the unit. Getting started 5 Connections Connection to a TV Antenna (Back of TV) or Antenna (Back of TV) Cable Signal Cable Signal 3 or Connect Round Coaxial Cable (supplied) 1 Disconnect DIGITAL AUDIO AUDIO OUT OUT DVD S-VIDEO COMPONENT VIDEO OUT Y L COAXIAL PB/CB IN R DVD/VCR AUDIO IN AUDIO OUT ANTENNA IN L L R R VIDEO IN VIDEO OUT 2 OUT PR/CR Connect OUT (Back of this unit) 4 Plug in the AC power cord of this unit. Make one of the following connections, depending on the capabilities of your existing equipment. Basic Audio Method 1 Method 2 Good picture Better picture Method 3 Best picture TV AUDIO IN VIDEO IN COMPONENT VIDEO IN S-VIDEO IN Y PB/CB PR/CR Video cable (supplied) Audio cable (supplied) S-Video cable (commercially available) This unit Component Video cables (commercially available) DVD DVD/VCR AUDIO OUT T AUDIO OUT DVD S-VIDEO COMPONENT VIDEO OUT Y PB/CB L IN R DVD/VCR AUDIO IN AUDIO OUT ANTENNA IN L L R COMPONENT VIDEO OUT DVD S-VIDEO Y PB/CB R R VIDEO IN VIDEO OUT DVD/VCR L OUT VIDEO OUT PR/CR OUT PR/CR OUT or DVD AUDIO OUT DIGITAL AUDIO OUT DVD AUDIO S-VIDEO COMPONENT VIDEO OUT OUT Y PB/CB L COAXIAL IN R VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT DVD/VCR AUDIO IN AUDIO OUT ANTENNA IN L L R L R VIDEO IN VIDEO OUT OUT PR/CR OUT R • These jacks are useful only in DVD mode. AUDIO OUT Note • Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system. • Method 2 and method 3 are only useful in DVD mode. • Although you can view images when using the connection Method 1 and 2 while Progressive Scan is activated, they are in Interlace mode. If your TV is compatible with Progressive Scan (480p) and you want to enjoy that high quality picture; You must select the connection Method 3 above and Progressive Scan mode.To set the mode, press and hold the SETUP button on the remote control for more than 3 seconds during DVD playback, so that “P.SCAN” will appear on the display of this unit. If your TV is not compatible with Progressive Scan; Use this unit in Interlace mode. Make sure that no “P.SCAN” is on the display of this unit. If not, press and hold the SETUP button on the remote control for more than 3 seconds during DVD playback, so that “P.SCAN” on the display of this unit will disappear. 14 PLAY STOP REC/OTR SETUP REC MONITOR MENU/LIST TOP MENU TIMER PROG. ENTER RETURN more than 3 seconds during DVD playback [Interlace mode] [Progressive Scan mode] Connections Before you start Connection to a cable box or satellite box Connection A (Cable box or Satellite box) OUT ANTENNA IN OUT Round Coaxial Cable Cable Signal Connections IN (Back of this unit) DVD/VCR E (supplied) (Back of TV) Getting started Select this connection when you want to view or record a scrambled channel.With this connection, channels cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable box or the satellite box. • While you are recording, only the recorded channel can be viewed. To select channels of the cable box or satellite box 1) Turn on this unit by pressing POWER button.The “POWER” indicator on the front panel will appear. Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of the cable box or satellite box). • If noise appears on the TV screen, press VIDEO/TV button on the remote control. • If you use the channel 4, you will need to change this unit’s RF output to channel 4. Refer to “RF converter output” on page 100. 2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1). 3) At the cable box or satellite box, select the channel you want to view or record. Recording (Back of this unit) Connection B ANTENNA IN Cable Signal OUT (Cable box or Satellite box) IN Playing discs DVD/VCR E OUT (Back of TV) Editing Round Coaxial Cable (supplied) Round Coaxial Cable Select this connection when you want to change channels on this unit.With this connection, you may watch one channel while recording another. • You may not view or record a scrambled channel. To select channels of the cable box or satellite box 1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output channel.) • Refer to “RF converter output” on page 100. 2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box. 3) Turn on this unit by pressing POWER button. The “POWER” indicator on the front panel will appear. Then, select the channel you want to view or record. • If noise appears on the TV screen, press VIDEO/TV button on the remote control. To playback a DVD disc or a videotape Follow the steps 1) to 2) above, to playback a DVD disc or a videotape. • Refer to “Playback” on pages 44-45, 94. To view one channel while recording another 1) While you are recording on this unit, press VIDEO/TV button. 2) At the cable box or satellite box, select the channel you want to view. Changing the SETUP menu VCR functions 15 Others Español Note to the Cable TV System Installer : This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. Getting started Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Method 1 Method 2 Stereo system Dolby Digital decoder, DTS decoder, MD deck or DAT deck Analog audio input jacks AUDIO COAXIAL Digital audio input jack Audio Coaxial Digital cable (commercially available) Audio cable (supplied) This unit DVD/VCR AUDIO OUT AUDIO OUT L R DVD DIGITAL AUDIO OUT DIGITAL AUDIO OUT COAXIAL or DVD AUDIO OUT L R 16 Note • If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder and set “Dolby Digital” to “Stream” for the “Digital Out” setting in the SETUP menu. (Refer to pages 90-91.) • If output is DTS encoded audio, connect to a DTS decoder and set “DTS” to “ON” for the “Digital Out” setting in the SETUP menu. (Refer to pages 90-91.) • The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. • Unless connected to a Dolby Digital decoder or a DTS decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF” for the “Digital Out” setting in the SETUP menu. Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to pages 90-91.) • Set “Dolby Digital” to “PCM” for the “Digital Out” setting in the SETUP menu for connecting to an MD deck or DAT deck. (Refer to pages 90-91.) • By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters. • By hooking this unit up to the DTS decoder, you can enjoy 5.1channel surround system which reproduces the original sound as truthfully as possible. 5.1channel surround system is developed by the Digital Theater System, Inc. Getting started Before you start Easy DVD recording The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and you have connected this unit and the TV correctly. Step 1: Choose a disc type Step 2: Insert a blank disc Remote Control POWER 1 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 2 Open the disc tray DEF CH Getting started Turn on the unit OPEN/CLOSE Connections There are several types of recordable DVD discs to choose from. Choose a recordable DVD disc type based on your playing/recording/editing requirements. See “DVD disc types” at the bottom of this page for more information on the differences among various compatible media. This DVD recorder can record on the following type of discs. 4.7 REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO POWER OPEN/CLOSE 3 Recording Close the disc tray CH Playing discs * This unit cannot record on the following discs. • DVD-RW Ver 1.2 / 2-4x CPRM compatible • DVD-R General Ver 2.0 / 8x For example, when you want to record repeatedly on the same disc or when you want to edit the disc after recording, select the rewritable DVDRW type disc. When you want to save recordings without any alteration, a non-rewritable DVD-R can be your choice. Loading This operation may take a while to be recognized. . : Most suitable. : Can be used. : Some functions are limited. DVD-RW VR DVD-R DVD-RW VR DVD-RW Video DVD-R Rewritable? Yes Yes No Can create chapters at fixed intervals (auto.) Yes Yes Yes Reuse by deleting unwanted contents Edit recorded contents Edit/Record from connected equipment Copy discs for distribution *1 Play on other DVD equipment *1 Features Recording Yes No No Can record 16:9 size pictures Yes Yes Yes Can record Copy-Once programs Yes No No Can perform basic edit functions Yes Yes Yes Can perform advanced edit functions (Playlist edit) Yes No No Editing *1 DVD-RW (VR mode) can only be played on DVD equipment that is VR compatible. Note: For details of the above functions and implied restrictions, see the explanations inside the manual. 17 Others Español Can create chapters wherever you like (manual) VCR functions DVD-RW Video Record TV programs Changing the SETUP menu You want to : Cannot be used. Insert the disc in the unit. Then, format the disc from SETUP menu.Video format (Video mode) or Video recording format (VR mode) will be available depending on the disc type inserted.This is necessary to prepare the disc for recording. Details are on pages 29-30. When you format, the entire contents on that disc will be erased. • The unit automatically starts formatting when an unused disc is inserted. Editing Format the disc DVD disc types Getting started Easy DVD recording (Cont’d) Step 3: Select the Recording speed 1 Step 4: Select the desired channel Step 5: Record to DVD discs To select the DVD mode 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 SPACE CH VIDEO/TV SLOW 0 DISPLAY POWER REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE 2 REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 POWER 2 VCR CH VIDEO/TV 7 PAUSE OPEN/CLOSE STOP CH REC/OTR VIDEO/TV SETUP TIMER PROG. ENTER REC MONITOR SLOW SPACE SLOW DVD PAUSE PLAY 0 0 DISPLAY DVD VCR DISPLAY 1 VCR DVD PAUSE To select the recording speed SP 2:01 Rem. CH 1 I Hint 1: Play the recorded contents You can select the title you want to play from a displayed menu and immediately start to play. Recorded contents are easily Start Rec. Stop/Start Stop Rec. accessible, with simple procedure of choosing a title on a chapter in the menu screen. What are titles and chapters? The contents of a DVD disc are generally divided into titles.Titles may be further divided into chapters. Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 Hint 2: Edit the recorded disc Step 6: Stop the Record PQRS 7 WXYZ 8 9 VIDEO/TV SLOW 0 DISPLAY You will find editing discs is easy.This unit offers convenient edit functions which are possible only with DVD-R/RW discs. You can edit the following from a title list. TUV SPACE VCR DVD PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. • Putting names on titles • Setting pictures for thumbnails (VR mode) • Setting/clearing chapter markers • Deleting parts of titles or scenes (VR mode) Title Delete :This deletes an entire scene permanently from the disc. Scene Delete :This allows a user to edit within a specific scene (ex. commercials). Original and Playlist (VR mode) You can edit the recordings in Playlist without changing the original recordings. A Playlist does not take up much disc space. 58% Writing to Disc What “Original” or “Playlist” is for? Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version. • Original content refers to what’s actually recorded on the disc. • Playlist content refers to the edited version of the disc; how the Original content is to be played. Finalizing a Disc • This will allow a disc that is recorded on our unit to be played back on a different DVD player- without finalization it will not be playable on another player. • After finalizing a disc if the recording was in video mode, you can not edit any information that is on that disc. • If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing. 18 This operation may take a while to be completed. Getting started Before you start Channel setting 4 POWER Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. Getting channels automatically 1 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE CH Connections All channels are stored in the unit when purchased.We recommend that you get available channels in your area stored using “Auto Preset” in the Channel Preset of the SETUP menu. VIDEO/TV SLOW 0 Setup DISPLAY DVD VCR PAUSE PLAY Press POWER button to turn on the unit. 3 7 Playback Setting STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 2 5 Select “Channel” using K / L / { / B buttons, then press ENTER button. Channel Preset menu will appear. Setup > Channel Preset VCR DVD Auto Preset TV Audio Select Stereo 6 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: CH 18 Auto Presetting Now Note Setup Menu 19 Others Español Press SETUP button to exit. •You can select only the channels memorized in this unit by using the CHANNEL buttons. VCR functions 7 • If the auto presetting is cancelled during presetting, some channels not yet preset may not be received. • The selection will depend on how you receive the TV channels. To cancel the auto presetting during scanning: Press RETURN button or SETUP button to cancel. Changing the SETUP menu Select “Auto Preset” using K / L buttons, then press ENTER button. The unit will start getting channels available in your area. To select a channel You can select a channel by directly entering channel using the Number buttons on the remote control. Notes for using the Number buttons: • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press 1,1,7) • You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). • You can select the line input mode (“L1” or “L2”).To select “L1” by pressing [0],[0],[1].To select “L2” by pressing [0],[0],[2].Details are on page 38. Editing 3 SKIP Playing discs Manual Preset SKIP CM SKIP 4 5 6 Recording Turn the TV on and be sure to select the input to which the unit is connected. SEARCH MODE RETURN Getting started 1 Getting started Channel setting (cont’d) Adding/deleting channels The channels you no longer receive or seldom watch can be deleted from the memory.You also may add channels into memory. 4 Select “Manual Preset” using K / L buttons, then press ENTER button. Manual Preset menu will appear. 1 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 Setup > Channel Preset > Manual Preset DISPLAY 1 7 Setup > Channel Preset > Manual Preset CH18 Add Delete 6 Select “Channel” using K / L / { / B buttons, then press ENTER button. Channel Preset menu will appear. Setup > Channel Preset VCR Manual Preset TV Audio Select Select “Add” or “Delete” using K / L buttons, then press ENTER button. The channel number will be added or deleted from the channel memory.Then, the next channel number will appear so that you can continue adding or deleting channels. DVD Auto Preset Stereo PAUSE STOP REC/OTR SETUP 7 Press SETUP button to exit. TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM Setup 3 DVD VCR PLAY Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. Playback Setting SLOW CH2 Add Delete Select the channel number to add or delete. Press { button to move to a lower channel number. Press B button to move to a higher channel number. 2 CH VIDEO/TV 0 5 Setup Menu OPEN/CLOSE DEF SPACE Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 20 POWER SEARCH MODE CM SKIP RETURN SKIP SKIP 2 3 4 5 6 Getting started Before you start Selecting the TV stereo or SAP You can select a sound channel to output from TV. “Stereo” has been selected as the default. Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “TV Audio Select” using K / L buttons, then press ENTER button. Option window will appear. Setup > Channel Preset VCR POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DVD AUDIO DEF SPACE Auto Preset OPEN/CLOSE Connections 1 4 CH VIDEO/TV SLOW 0 Manual Preset TV Audio Select DISPLAY DVD VCR PAUSE PLAY 1 6 5 Setup Menu MENU/LIST TOP MENU SEARCH MODE RETURN SKIP SKIP CM SKIP 2 3 4 5 Stereo: Outputs main-audio. SAP: (Secondary Audio Program) Outputs sub-audio. Refer to the item in “Glossary” on page 102 for more information. Playing discs Setup TIMER PROG. ENTER REC MONITOR Editing 6 Playback Setting Press SETUP button to exit. 3 Notes on TV channel audio Setup > Channel Preset VCR DVD • When you record a TV program available in second audio or stereo on a DVD-RW/R or videotape, you have to select either Stereo or SAP in the Channel Preset screen beforehand. Refer to the following table to check an appropriate setting. Selected audio Stereo Auto Preset Manual Preset Stereo SAP Disc (Videotape) recording STEREO STEREO MONO MONO SAP STEREO SAP MONO Audio output STEREO STEREO MONO MONO SAP STEREO SAP MONO VCR functions TV Audio Select Broadcast audio STEREO+SAP STEREO MONO+SAP MONO STEREO+SAP STEREO MONO+SAP MONO Changing the SETUP menu Select “Channel” using K / L / { / B buttons, then press ENTER button. Channel Preset menu will appear. Recording Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. SETUP CLEAR/C.RESET ZOOM Select “Stereo” or “SAP” using K / L buttons, then press ENTER button. 2 STOP REC/OTR Getting started Stereo Stereo SAP 21 Others Español • As can be seen in the above table, when a TV program is available in second audion and you set Channel Preset to SAP, you can only play the recording in second audio. Getting started Setting the clock Set the clock before you try the timer recording. If a Public Broadcasting Station (PBS) is available in your area, follow Auto Clock Setting below. If not, follow Manual Clock Setting on pages 23-24. Auto Clock Setting 4 Select “Auto Clock Setting” using K / L buttons, then press ENTER button. Option window will appear. Make sure • The antenna/cable TV connections are correct. • If this unit is connected to a Cable Box or Satellite Box, select the local PBS station on them to set the clock automatically. 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Setup > Clock POWER 7 REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 VCR DVD AUDIO DEF SPACE Clock Setting Auto Clock Setting Daylight Saving Time OPEN/CLOSE CH VIDEO/TV SLOW 0 OFF Auto Auto Manual Off DISPLAY DVD VCR PAUSE PLAY 1 6 5 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE • If you do not know your PBS channel number, select “Auto” using K / L buttons, then press ENTER button. CM SKIP RETURN SKIP SKIP 2 3 4 5 • If you know your PBS channel number, select “Manual” using K / L buttons, then press ENTER button. Setup Menu Setup > Clock Clock Setting 2 Auto Clock Setting Daylight Saving Time Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. VCR DVD OFF Set Channel No. Auto Auto CH1 Manual Off Setup Enter your PBS channel number using Number or K / L buttons, then press ENTER button. Playback Setting 6 3 Press SETUP button to exit. Select “Clock” using K / L / { / B buttons, then press ENTER button. Clock menu will appear. Setup > Clock VCR DVD Clock Setting 22 Auto Clock Setting Auto Daylight Saving Time ON 7 Press POWER button to turn off the unit. This unit will search for the time only when the power is off. Leave it off for several minutes to give this unit time to set the clock on the display of the front panel. Note • The clock may set itself automatically after you connect the antenna/cable signal to this unit and plug in the power cord. In this case, the current time will appear on the front panel display. • If the current time is not displayed or the displayed clock is not correct, set the clock manually. Getting started Before you start Setting the clock (cont’d) Manual Clock Setting 4 1 Select “Clock Setting” using K / L buttons, then press ENTER button. A clock setting window will appear. POWER REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DEF SPACE Setup > Clock OPEN/CLOSE Connections Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: CH VIDEO/TV SLOW 0 VCR DVD DISPLAY DVD VCR PAUSE Clock Setting Auto Daylight Saving Time ON ---/--/----(---) --:-- PLAY 1 STOP REC/OTR SETUP Setup Menu TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU Press ENTER button again. Default date will appear. Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. 5 Enter the date (month / day / year) using K / L buttons. Press { / B buttons to move the cursor. Setup > Clock CM SKIP SKIP 2 3 4 5 6 Playing discs Setup SEARCH MODE RETURN SKIP VCR DVD Clock Setting Auto Clock Setting Auto Daylight Saving Time ON JAN / 12 / 2004 (MON) 12 : 00AM Playback Setting Editing 3 VCR DVD 6 Enter the time (hour / minute) using K / L buttons. Press { / B buttons to move the cursor. Changing the SETUP menu Select “Clock” using K / L / { / B buttons, then press ENTER button. Clock menu will appear. Setup > Clock Recording 2 CLEAR/C.RESET ZOOM Getting started Auto Clock Setting Clock Setting Auto Clock Setting Auto Daylight Saving Time ON Setup > Clock VCR DVD Clock Setting Auto Daylight Saving Time ON JAN / 12 / 2004 (MON) 09 : 24 AM Note Instructions continue on page 24. 23 Others Español • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually. VCR functions Auto Clock Setting Getting started Setting the clock (cont’d) 7 Press K / L buttons to select AM or PM, then press ENTER button. Clock menu will appear, then the settings will be activated. 8 Press SETUP button to exit. Although seconds are not displayed, they begin counting from zero. POWER REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DEF SPACE Setup > Clock OPEN/CLOSE CH VIDEO/TV SLOW 0 VCR DVD DVD VCR DISPLAY PAUSE Clock Setting Auto Clock Setting Auto Daylight Saving Time ON PLAY 8 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP 7 SKIP CM SKIP When “Auto Clock Setting” is selected to “Auto” or “Manual”, change it to “OFF” as following steps. Repeat steps (1) to (3) in “Manual Clock Setting”. 4 5 Select “Auto Clock Setting” using K / L buttons, then press ENTER button. Option window will appear. Setup > Clock Clock Setting Auto Clock Setting Daylight Saving Time 24 VCR DVD OFF Auto Auto Manual Off Select “OFF” using K / L buttons, then press ENTER button. 6 Press SETUP button to exit. PLAY 6 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 4 5 Getting started Before you start Setting the clock (cont’d) Setting the daylight saving time Select “Daylight Saving Time” using K / L buttons, then press ENTER button. Daylight Saving Time options will appear. POWER REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DEF SPACE Setup > Clock CH VIDEO/TV SLOW 0 VCR DVD DISPLAY 1 OPEN/CLOSE Connections When Daylight Saving Time is ON, the clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. 4 DVD VCR PAUSE Clock Setting Daylight Saving Time Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Auto ON OFF PLAY 1 6 STOP REC/OTR SETUP MENU/LIST TOP MENU CLEAR/C.RESET ZOOM Select “ON” or “OFF” using K / L buttons, then press ENTER button. Choose “ON” when currently observing the daylight saving time. Setup Menu Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. CM SKIP SKIP SKIP 2 3 4 5 Playing discs 2 SEARCH MODE RETURN 6 Press SETUP button to exit. Editing Setup Changing the SETUP menu Playback Setting 3 VCR functions Select “Clock” using K / L / { / B buttons, then press ENTER button. Clock menu will appear. Setup > Clock Recording 5 TIMER PROG. ENTER REC MONITOR Getting started Auto Clock Setting VCR DVD Clock Setting Auto Clock Setting Auto Daylight Saving Time ON Others Español 25 Getting started Selecting the TV aspect ratio You can select the TV aspect ratio to match the formats of what you are playing with the unit and your TV screen (4:3 standard or 16:9 widescreen TV). “4:3 Letter Box” has been selected as the default. 4 Select “TV Aspect” using K / L buttons, then press ENTER button. Option window will appear. Setup > Playback 1 POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DVD AUDIO DEF SPACE TV Aspect Parental Lock Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Disc Menu Language Audio Language Subtitle Language 16:9 Box Wide 4:3 Letter 8 & Scan 4:3 Pan 16:9English Wide Dynamic Range Control ON Fast Forward with Audio OFF Refer to the Note on this page. DISPLAY 1 6 Select a desired option using K / L buttons, then press ENTER button. Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. DVD VCR PAUSE STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 5 2 SLOW PLAY SEARCH MODE Setup Menu CH VIDEO/TV 0 Original OFF Digital Out OPEN/CLOSE CM SKIP RETURN SKIP SKIP 2 3 4 5 6 Press SETUP button to exit. Setup Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Playback menu will appear. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language DVD 4:3 Letter Box All English Original OFF Digital Out 26 Dynamic Range Control ON Fast Forward with Audio OFF Note If you have a standard TV: Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the screen. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed. If you have a widescreen TV: Select “16:9 Wide”. Recording Information Recording speed This unit can record to DVD-RW and DVD-R discs. When recording, you will need to select a recording format between Video mode and VR mode depending on the disc format.When recording to DVDRW, a recording format will be “Video mode” or “VR mode” because a disc format is available between “Video Recording format” and “Video format” for DVD-RW. On the other hand, the disc format for DVD-R is always “Video format,” so a recording format will be “Video mode”. You can select a recording speed among 6 options, and the recording time will depend on the recording speed you select as follows. 8cm/12cm, single-sided, single layer disc Approx. max. recording time (SEP mode): 600 minutes (4.7GB) (for 12cm) DVD-RW 180 minutes (1.4GB) (for 8cm) DVD-R Disc type Functions Video mode Playing, limited recording, limited editing Video DVD-RW DVD-RW VR mode VR DVD-RW Video mode DVD-R DVD-R Playing, limited recording, limited editing 360 min SLP 480 min SEP 600 min * This table is designed for a new single-sided 12cm disc as the standard.The recording time are estimates and actual recording time may differ. * The audio and video quality is getting poorer as the recording time becomes longer. * Discs recorded in SLP or SEP on this recorder may not be played back on other DVD recorders or DVD players. Restrictions on recording You cannot record copy-protected video using this unit. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, the unit will pause or stop automatically and an error message will be displayed on-screen. Video that is “copy-once only” can only be recorded using a DVD-RW disc in VR mode with CPRM (see below). When recording a TV broadcast or through an external input, you can display copy control information on screen. What is “CPRM”? CPRM is a copy protection system with scramble system regarding the recording of “copy once” broadcast programs. CPRM stands for Content Protection for Recordable Media. This unit is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM. 27 Others Español 4.7 Playing, recording, Original/Playlist editing EP VCR functions Disc format 240 min Changing the SETUP menu DVD players with are capable of playing DVD-RW recorded in VR mode. LP Editing About Video mode and VR (Video Recording) mode Video mode is the same recording format as DVDVideo discs purchased locally, so that you can play in most DVD players.To play in other DVD players, you will need to finalize (see page 41). If not finalized, you can play, record additionally or edit discs recorded in Video mode with this unit. VR (Video Recording) mode is a basic recording format for DVD-RW.You can record and edit repeatedly. 120 min Playing discs * This unit cannot record on the following discs. • DVD-RW Ver 1.2 / 2-4x CPRM compatible • DVD-R General Ver 2.0 / 8x SP Recording 4.7 8cm/12cm, single-sided, single layer disc Approx. max. recording time (SEP mode): 600 minutes (4.7GB) (for 12cm) 180 minutes (1.4GB) (for 8cm) 60 min Getting started Attributes XP Connections Logo Recording Recording Video/Sound Quality speed time * Before you start Information on DVD recording Recording Information on DVD recording (cont’d) Information on copy control Some satellite broadcasts include copy-protected information. For recording these, refer to the following. Disc type / format Making discs playable in other DVD player (Finalize) After recording, you must finalize the disc in order to play on other unites. (Refer to page 41.) Copy-free Copy-once Copyprohibited Finalizing* ver.1.1 DVD-RW ver.1.1 CPRM compatible VR DVD-RW ver.1.1 ver.1.1 CPRM compatible DVD-R ver.2.0 Video Recordable Not Recordable Note • The audio and video quality is getting poorer as the Recording time becomes longer. • This unit cannot record CD-RW or CD-R discs. • DVD-RW/R and CD-RW/R discs recorded using a personal computer or a DVD or CD recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the pickup lens. • If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) • Discs recorded in video mode on this DVD recorder cannot record additionally using other DVD recorders. • A DVD-RW disc formatted with this unit cannot be used in other DVD recorders without any recording using this unit. • Since the recording is made by the variable bit rate (VBR) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the OSD. 28 Playable This Unit DVD player Not Playable * You cannot finalize discs in other DVD recorders. After finalizing: • Once DVD-RW/R (Video mode) is finalized, you cannot record additionally or edit. • Even if DVD-RW (VR mode) is finalized, you can record additionally or edit the disc. • When DVD-RW/R (Video mode) is finalized, title menu will be created automatically. To play in other DVD players, finalize discs recorded on this unit with the following condition. Disc type Mode DVD-RW ver.1.1 ver.1.1 CPRM compatible Video mode VR mode DVD-R ver.2.0 Video mode Recording Before you start Formatting a disc Choosing the recording format of a blank disc Video VR DVD-RW DVD-RW 4 POWER Select “DVD-RW Recording Format” using K / L buttons, then press ENTER button. Option window will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE Connections When inserting a blank disc, the unit starts to initialize the blank disc. After that, you can record to the disc with the recording format selected in SETUP menu. You are allowed to set a specified time for chapter marks. DEF SPACE CH VIDEO/TV SLOW 0 Setup > Recording DVD DISPLAY DVD VCR PAUSE mode DVD-RW Recording Format Video VR mode VR mode Auto Chapter 10 minutes Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: PLAY Timer Programming Dubbing Mode VCR DVD Video mode DVD Player Compatibility mode. VR mode Editing possibility mode. VR mode has been selected as the default. 1 8 STOP REC/OTR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE SKIP 2 3 4 5 6 7 6 Select “Auto Chapter” using K / L buttons, then press ENTER button. Option window will appear. Playing discs Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. CM SKIP RETURN SKIP Recording Select “Video mode” or “VR mode” using K / L buttons, then press ENTER button. The recording mode will be set. 2 TIMER PROG. ENTER REC MONITOR 5 Setup Menu SETUP Getting started 1 Setup DVD-RW Recording Format Auto Chapter Timer Programming Dubbing Mode Editing Setup > Recording DVD VR mode OFF 5 minutes 10 minutes 10 minutes 15 minutes VCR DVD 30 minutes 60 minutes Note 3 Setup > Recording DVD-RW Recording Format Auto Chapter DVD VR mode 10 minutes Timer Programming Dubbing Mode VCR 7 Select a desired time option using K / L buttons, then press ENTER button. Chapter marks will be put as you specified. DVD Press SETUP button to exit. 29 Others Español 8 • When inserting a blank DVD+RW or DVD+R disc, the error message ("Disc Error") will appear.You cannot record on a DVD+RW/R. On this unit, DVD+RW and DVD+R are for playback only. • PLAYLIST will be created automatically when recording on DVD-RW in VR mode. • The time for chapter marks is not accurate in Video mode. • A blank chapter may be created depending on the remaining time of the disc. VCR functions Select “Recording” using K / L / { / B buttons, then press ENTER button. Recording menu will appear. “10 minutes” has been selected as the default. Changing the SETUP menu Playback Setting Recording Formatting a disc (cont’d) Reformatting a disc Video VR DVD-RW DVD-RW If you are using a DVD-RW disc, by default it will be VR mode.You can change this to Video mode from SETUP menu. 1 4 POWER Select “Yes” using { / B buttons, then press ENTER button. Option window will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE CH VIDEO/TV SLOW 0 Disc Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: DISPLAY DVD VCR Edit Format PLAY Finalize Disc Protect OFF ON Yes STOP No REC/OTR 1 Are you sure? Yes No SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU * VR mode only CLEAR/C.RESET ZOOM SEARCH MODE 5 Select “Yes” using { / B buttons, then press ENTER button. Formatting will start. Setup Menu 2 PAUSE CM SKIP RETURN SKIP SKIP 2 3 4 5 Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Disc Edit 58% Format Formatting Finalize Disc Protect OFF ON 6 Formatting is complete. 100% will be indicated. * VR mode only 3 Select “Format” using K / L buttons, then press ENTER button. Option window will appear. 100% Formatting Disc Edit This operation may take a while to be completed. Format Finalize Disc Protect OFF ON Yes * VR mode only 30 No Note • When you reformat the disc, the contents of the disc will be erased. • If you want to cancel format at step 5, select “No”. Recording Before you start Basic recording Video VR DVD-RW DVD-RW DVD-R DVD Select a desired channel to record using CH K / L buttons or number buttons. POWER 4 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH 4 VIDEO/TV SLOW 0 1 DISPLAY CH 1 PAUSE STOP 5 This operation may take a while to be recognized. 5 PLAY REC/OTR SETUP TIMER PROG. REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE 6 ENTER RETURN SKIP SKIP CM SKIP Getting started Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit. DVD VCR Connections Follow the steps below to record TV programs. First: 2 4 5 Select a recording speed using REC MODE/REC SPEED button. Press REC/OTR button to start recording. I mark will be displayed for 5 seconds. Note SP 2:01 Rem. This operation may take a while to be completed. 31 Others Español When a DVD-R disc is loaded: DVD-R discs will always be in Video mode. Press STOP C button to stop the recording. VCR functions When a DVD-RW disc is loaded: You can choose Video mode or VR mode from SETUP menu. “VR mode” has been selected as the default. Refer to “Choosing the recording format of a blank disc” on page 29. 6 Changing the SETUP menu Make sure that the recording format is set to the desired mode. Refer to “Formatting a disc” on pages 29-30. Editing 3 To pause the recording, press PAUSE F button. Press REC/OTR button to restart the recording. • Recording starts immediately and continues until the disc is full or you stop recording. • When the clock setting has not been made, the space for a date and time of title names in the original or playlist will be blank. • When you record a TV program which has Stereo and SAP-audio on a DVD-RW/R (Video mode), you have to select the TV channel audio (Stereo or SAP) beforehand. Only the selected channel audio will be recorded. Refer to “Selecting the TV stereo or SAP” on page 21 for more details. • You cannot mix two formats on one DVD-RW disc. When you load a disc once recorded before, the recording format cannot be changed even if you change it in SETUP menu. • You cannot change the recording speed during the REC pause mode. • You can change a channel during the REC pause mode. Playing discs I Refer to “Recording speed” on page 27. Recording 2 Recording Basic recording (cont’d) Checking the recording picture quality Video VR DVD-RW DVD-RW DVD-R You can confirm the recording picture quality with the recording speed you have selected before attempting to record to a DVD disc. First: 2 1 Press REC MONITOR button again to exit. REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 POWER 7 SPACE OPEN/CLOSE CH VIDEO/TV SLOW 0 DVD DISPLAY 1 DVD VCR PAUSE PLAY STOP While the unit is in STOP or REC with a DVD disc to record inserted, press REC MONITOR button. The TV program will be on the screen in the recording picture quality with the recording speed you have selected. REC/OTR 1 2 SETUP TIMER PROG. ENTER REC MONITOR RETURN MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE SKIP SKIP CM SKIP CH 18 Rec Monitor XP If you want to change the recording speed, press REC MODE/REC SPEED button repeatedly. The recording speed will be changed as you press the button as shown. Refer to “Recording speed” on page 27. • You cannot change the recording speed during recording. XP SP LP SEP SLP EP Note • You cannot check the recording sound quality with the Rec monitor function. 32 Recording Before you start One-touch timer recording Video VR DVD-RW DVD-RW DVD-R 1 2 POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 5 AUDIO OPEN/CLOSE DEF SPACE CH 4 VIDEO/TV SLOW 0 Press REC/OTR button, then press REC/OTR button repeatedly until a desired recording time (30 minutes to 8 hours) appears on the TV screen. Recording will start. DISPLAY DVD VCR PAUSE PLAY STOP 5 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE 5 RETURN SKIP SKIP CM SKIP Recording Turn on the unit and load a recordable disc. Make sure that the TV input is set on the unit. Select a desired channel to record using CH K / L buttons or number buttons. This operation may take a while to be recognized. Select a recording speed using REC MODE/REC SPEED button. Refer to "Recording speed" on page 27. 8:00 7:30 When the unit reaches the specified time, it will turn off automatically. To change the recording length during the one-touch timer recording, press REC/OTR repeatedly untill the desired length appear. To cancel the one-touch timer recording within the specified time, press STOP C button. This operation may take a while to be completed. Note • The remaining recording time will appear on the display panel during an one-touch timer recording. Press DISPLAY button to see it on the TV screen. • You cannot pause a one-touch timer recording. • Unlike a timer recording, you can perform the following operations during a one-touch timer recording. - Turning the power off - Using REC, STOP C, or RETURN buttons. • The unit will be turned off automatically under the following conditions. 1)No space remained on the disc. 2)When a power failure occurs. • If OTR is finished in DVD during playback or REC mode in VCR, the DVD will be in STOP mode and the VCR keeps the current mode. 33 Others Español When a DVD-R disc is loaded: DVD-R discs will always be in Video mode. (Normal Recording) 1:00 VCR functions When a DVD-RW disc is loaded: You can choose Video mode or VR mode from SETUP menu. "VR mode" has been selected as the default. Refer to page 29 "Choosing the recording format of a blank disc." 0:30 Changing the SETUP menu Make sure that the recording format is set to the desired mode. Refer to "Formatting a disc" on pages 29-30. 0:30 Editing 3 I Playing discs 2 Getting started DVD 4 Connections This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby. First: Recording Timer recording Video VR DVD-RW DVD-RW DVD-R VCR You can program the unit to record up to 8 programs, up to a year in advance. Daily or weekly program recordings are also available. • Be sure to set the clock before making a timer programming. • Insert a recordable disc or a videotape with a record tab. 4 Select “Timer Programming” using K / L buttons, then press ENTER button. Timer Programming list will appear. You can choose the timer programming menu by pressing TIMER PROG. button. In this case, continue with step 5. POWER Setup > Recording > Timer Programming Date ------- 1 Start End CH DVD VCR Speed REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE CH VIDEO/TV SLOW 0 DISPLAY Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: 5 VCR DVD PLAY Select the program which is not set up using K / L buttons, then press ENTER button. 1 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 6 SEARCH MODE RETURN SKIP CM SKIP Enter the date using K / L buttons, then press B button. Setup Menu Setup > Recording > Timer Programming 2 DVD Date Start End CH VCR Speed JAN / 01 - - : - -AM - - : - -AM CH8 DVD ------- Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. PAUSE SKIP 2 3 4 5 6 7 e.g. January 1st JAN/01 L Daily Setup L When pressing L button at the current date, timer recording mode will change as follows. MON-SAT L MON-FRI L SAT L Playback Setting L 3 FRI Note L SUN Select “Recording” using K / L / { / B buttons, then press ENTER button. Recording menu will appear. Setup > Recording DVD-RW Recording Format Auto Chapter DVD VR mode 10 minutes Timer Programming Dubbing Mode VCR DVD L DEC/31 7 Enter the time to start and to end using K / L buttons, then press B button. Setup > Recording > Timer Programming DVD Date Start End CH VCR Speed JAN/12 10 :00PM - - : - -AM CH8 DVD ----- 34 • If you have not set the clock yet: A clock setting window will appear after step 4. Continue with the step 4 in “Auto Clock Setting” on page 22 or “Manual Clock Setting” on page 23 before making a timer programming. • Press { or B buttons to move the cursor to the left and the right in the timer programming menu. Recording Before you start Timer recording (cont’d) 8 10 Select the channel number to Select a recording speed using K / L buttons. Setup > Recording > Timer Programming Date Start JAN/12 10:00PM --- Setup > Recording > Timer Programming Date Start JAN/12 10:00PM --- DVD End CH VCR Speed 10:30PM CH8 DVD To record from external input, L1 or L2. using K / L buttons, then press B button. Setup > Recording > Timer Programming Date Start JAN/12 10:00PM --- DVD End CH VCR Speed 10:30PM CH8 DVD ABC DEF 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 DVD End CH VCR Speed 10:30PM CH8 DVD XP SPACE PAUSE STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU RETURN CLEAR/C.RESET ZOOM SEARCH MODE SKIP SKIP CM SKIP 8 9 10 11 Note • After step 12, the unit will be turned on automatically 2 minutes (For VCR recording, 10 seconds) in advance of the recording time to start and waits to start.Then the recording will start at the recording time you set. Checking, canceling, or correcting the timer programming information POWER 4 Press POWER button so that indicator disappears from the front display. To clear the timer programming, select your desired program using K / L buttons, then press CLEAR/C.RESET button. 2 Setup > Recording > Timer Programming Date Start JAN/12 10:00PM --- DVD End CH VCR Speed 10:30PM CH8 DVD XP 3 5 Press TIMER PROG. button to exit. 6 Press POWER button to return to the timer standby mode. Press STOP C button to stop the disc recording or STOP/EJECT C A to stop the videotape recording on the front panel of the main unit. STOP C button on the remote control is not effective. 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU 4 CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP 2 5 4 SKIP CM SKIP Note • Press TIMER PROG. button to check the timer programming in process. When the timer recording is in process, that program will be red highlighted. In this case, you cannot select any other program. 35 Others Español To stop the timer recording in process ABC GHI VCR functions Check the information on the list you will need. To correct the timer programming, select your desired program using K / L buttons, then press ENTER button. Next, correct the timer programming using K/L/{/B buttons. Finally, press ENTER button again. .@/: 1 OPEN/CLOSE Changing the SETUP menu Press TIMER PROG. button. Timer Programming list will appear. 1 6 AUDIO Editing 1 REC MODE REC SPEED Playing discs Press POWER button to turn off. indicator will appear on the front display. SLOW DVD PLAY 11 12 VIDEO/TV 0 VCR DISPLAY Refer to “Recording speed” on page 27 for DVD or page 94 for VCR. Press ENTER button when all information required is entered. Your program setting will be stored. • To set another program, repeat steps 5 to 11. • To exit, press SETUP button. CH Recording • To record on to a videotape, select VCR. • To record on to a disc, select DVD. .@/: 1 OPEN/CLOSE Getting started 9 Select a recording media 12 AUDIO Connections record using K / L buttons, then press B button. REC MODE REC SPEED POWER Recording Timer recording (cont’d) Hints for timer recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. • If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed. Please insert a recordable disc. • If a videotape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and timer recording cannot be performed. Please insert a recordable videotape. • When all the timer recording is completed, the indicator flashes.To play or eject the recorded disc (or the videotape), press POWER button first and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A) button. • The timer recording is not performed in DVD and VCR at the same time. If you set two programmings with the same channel and time both in DVD and VCR, the programming that has priority will be recorded. indicator is on the front display), any operations on the unit will not be • During timer recording or timer standby ( available.To make these operations available, cancel the timer recording or timer standby first ( indicator disappears). • To cancel the timer standby mode, press POWER button. • When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc reaches at the end during the recording, the unit turns itself off. • When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year. • If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time. • If a videotape ends during timer recording, the unit will stop, eject the videotape, and turn itself off. • When two or more programs are overlapped, “Overlap” will appear in the display. • If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off. The priority of overlapped settings This unit records the programs according to priority if the timer programmings are overlapped.The timer programming set previously has priority. A timer recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary. A programming set previously has priority When the starting time is the same: A program set previously (PROG. 1) has priority. When some programming have been made at the end time of the programming currently being recorded: A program set previously (PROG. 2) has priority. ex. 2 ex.1 PROG. 1 PROG. 1 PROG. 2 PROG. 2 PROG. 3 Actual PROG. 1 PROG. 2 recording The first 30 seconds (at the longest) will be cut off Actual PROG. 1 PROG. 2 recording The first 30 seconds (at the longest) will be cut off When the recording time is partially overlapped: PROG. 1 will start after PROG. 2 is complete to be recorded. However, PROG. 1 will be recorded if you turn the power off for timer standby within 2 minutes to the Start time for PROG. 1. PROG. 1 Note PROG. 2 Actual PROG. 2 PROG. 1 recording The first 30 seconds (at the longest) will be cut off When the recording time is entirely overlapped: However, if you turn the power off for timer standby within 2 minutes to the Start time for PROG. 1, PROG. 1 will be recorded first, and the recording of PROG. 2 will start after the recording of PROG. 1 is completed. PROG. 1 • When the recording time of two programs are overlapped, or the End time of a program and the Start time of another is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off. PROG. 2 Actual recording PROG. 2 When the End time of the programming currently being recorded and the Start time of the subsequent program are same: If PROG. 1 is a DVD recording program, the beginning of the PROG. 2 may be cut off. The amount of time cut off differs depending on the recorded media. For example, if both PROG. 1 and PROG. 2 are DVD recordings, the first 30 seconds (at the longest) will be cut off PROG. PROG. 1 PROG. 2 Actual recording PROG. 1 PROG. 2 The first 30 seconds (at the longest) will be cut off. 36 Recording Connection to an external source Video VR DVD-RW DVD-RW DVD-R VCR OUTPUT S- VIDEO L OUTPUT Another source (VCR camcorder etc.) VIDEO AUDIO R S- VIDEO VIDEO AUDIO L R Getting started or or S-Video cable Video cable S-Video cable Audio cable Connections Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear). When you record on a videotape, use either the DVD/VCR VIDEO IN jack (Rear) or VIDEO IN jack (Front). S-VIDEO input is useful only in DVD mode. When connecting an external equipment of monaural output to this unit, use AUDIO L jack of LINE 1 (Rear) or LINE 2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. Before you start Settings for an external source Video cable Audio cable DVD S-VIDEO DVD/VCR AUDIO IN L S-INPUT VIDEO L(MONO) - AUDIO - R To LINE 2 IN R IN VIDEO IN Recording or To LINE 1 IN OPEN/CLOSE DVD S-VIDEO DIGITAL AUDIO AUDIO OUT OUT COMPONENT VIDEO OUT Y POWER STOP/EJECT REW F.FWD PLAY VCR DVD STOP PLAY L COAXIAL REC/OTR REC/OTR R CHANNEL (TRACKING) DUBBING OUTPUT SELECT DVD/VCR AUDIO IN AUDIO OUT ANTENNA IN L L R R VIDEO IN VIDEO OUT OUT PR/CR OUT Front of this unit DVD Rear of this unit 1. Press SETUP button to display SETUP/DISC menu. 2. Select “SETUP” using { / B buttons, then press ENTER button. 3. Select “Select Video” using K / L / { / B buttons, then press ENTER button. Setup > Select Video DVD L1 (Rear) Video In L1 (Rear) Video In L2 (Front) Video In L2 (Front) Video In L1 (Rear) L2 (Front) DVD Video Video In In S-Video Video In Setup > Select Video DVD L1 (Rear) L2 (Front) DVD Video Video In In S-Video Video In 5. Select the input jack type to connect using K / L buttons, then press ENTER button. If you want to use S-VIDEO INPUT, select “S-Video In”. If you want to use VIDEO INPUT (Composite), select “Video In”. Setup > Select Video DVD L1 (Rear) Video In L1 (Rear) S-Video In L2 (Front) S-Video In L2 (Front) Video In Others Español 37 VCR functions 5. Select the input jack type to connect using K / L buttons, then press ENTER button. If you want to use S-VIDEO INPUT, select “S-Video In”. If you want to use VIDEO INPUT (Composite), select “Video In”. Setup > Select Video Changing the SETUP menu Setup > Select Video 4. Select “L1 (Rear)” using K / L buttons, then press ENTER button. Editing 4. Select “L2 (Front)” using K / L buttons, then press ENTER button. Playing discs 1. Press SETUP button to display SETUP/DISC menu. 2. Select “SETUP” using { / B buttons, then press ENTER button. 3. Select “Select Video” using K / L / { / B buttons, then press ENTER button. Setup > Select Video PB/CB IN Recording Settings for an external source (cont’d) Recording from an external source Video VR DVD-RW DVD-RW DVD-R VCR Before recording from an external source, see the instructions for the connection on page 37. 1. Turn the TV and the unit on, and be sure to select the input of the TV to which the unit is connected. DVD 5 1 2. When you want to record to the disc: Press: Press OPEN/CLOSE A button to open the disc tray, then place the disc to record properly. POWER REC MODE REC SPEED AUDIO ABC DEF 2 3 .@/: 1 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 SPACE OPEN/CLOSE CH VIDEO/TV SLOW 0 DISPLAY This operation may take a while to be recognized. 3. Press OPEN/CLOSE A button to close the disc tray. When you want to record to a videotape: Press: Insert the videotape with a record tab into the cassette compartment. 4. Select the input of the unit which the external equipment is connected. (L2 or L1) •To use the input jacks on the back of this unit, select “L1” position by pressing [0],[0],[1] on the remote control or the CH K / L buttons. •To use the input jacks on the front of this unit, select “L2” position by pressing [0],[0],[2] on the remote control or the CH K / L buttons. 5. Select a recording speed using REC MODE/REC SPEED button. Refer to “Recording speed” on page 27 for DVD or page 94 for VCR. SP LP SP SEP SLP DVD mode SLP EP VCR mode 6. Press REC/OTR button on the unit to start recording. 7. Press PLAY button on the external source to record from. 8. For disc: Press STOP C button on the unit to stop recording. This operation may take a while to be completed. For videotape: Press STOP/EJECT C A button on the unit to stop recording. 38 4 PAUSE PLAY VCR XP DVD VCR 2 3 STOP 6 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 8 Recording Before you start Dubbing Mode Video VR DVD-RW DVD-RW DVD-R VCR Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. Setup REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE 1 STOP REC/OTR SETUP 3 TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU Setup > Recording DVD-RW Recording Format Auto Chapter CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP SKIP SKIP 2 3 4 DVD VR mode 10 minutes VCR Playing discs Timer Programming Dubbing Mode DVD 1 4 Editing Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Select “Dubbing Mode” using K / L buttons, then press ENTER button. Option window will appear. DVD-RW Recording Format Auto Chapter VCR DVD Video mode OFF Timer Programming Setup Menu Dubbing Mode VCR DVD 39 Others Español Instructions continue on page 40. VCR functions For VCR to DVD duplication: • After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to playback the videotape until the picture is stabilized, then set the starting point which you wish to start recording, and start VCR to DVD duplication. Changing the SETUP menu Note Setup > Recording Recording Select “Recording” using K / L / { / B buttons, then press ENTER button. Recording menu will appear. RETURN Getting started PLAY Playback Setting Make sure: • Insert a recordable disc and a videotape with a record tab. Note for recording to a videotape: • The videotape's record tab is intact. • The remaining time of the videotape is long enough. Note for recording to a disc: • Make sure that the disc is recordable. Refer to pages 27 and 28. POWER Connections You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if the DVD disc or the videotape is not copy protected. Before starting this function, prepare for the recording on the DVDRW/R disc or the videotape. Refer to pages 31-32, 94. 2 Recording Dubbing Mode (cont’d) VCR to DVD DVD to VCR 5-a Select “VCR ⇒ DVD” using K / L buttons, then press ENTER button. REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 POWER 5-b Select “VCR ⇐ DVD” using K / L buttons, then press ENTER button. SPACE OPEN/CLOSE 7-a 7-b CH VIDEO/TV SLOW 0 VCR DISPLAY Setup > Recording DVD-RW Recording Format Auto Chapter VCR DVD Video mode OFF Timer Programming Dubbing Mode Setup > Recording DVD-RW Recording Format Auto Chapter VCR Dubbing Mode VCR VCR DVD DVD VCR DVD 6-a 6-b STOP REC/OTR SETUP 6-b Press SETUP button to exit SETUP menu. Make sure to select a recording speed using REC MODE/REC SPEED button. Press: Press SETUP button to exit SETUP menu. Press: 7-a Press PLAY B button on the unit, and then press PAUSE button at the point you wish to start recording. • Since it takes about a few seconds before the actual dubbing begins, please allow extra 5 seconds when selecting the starting point. 8-a Press DUBBING button on the front of the unit. VCR to DVD duplication will start. 9-a Press STOP C button on the unit or STOP C button on the remote control to stop the recording. 40 TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU SEARCH MODE 6-a 9-a 9-b PLAY CLEAR/C.RESET ZOOM VCR PAUSE DVD Video mode OFF Timer Programming VCR VCR DVD DVD VCR DVD DVD 5-a 5-b RETURN SKIP SKIP CM SKIP VCR Make sure to select a recording speed using REC MODE/REC SPEED button. Press: 7-a 9-a DVD OPEN/CLOSE STOP/EJECT POWER REW F.FWD PLAY 7-b Press PLAY B button on the unit, and then press PAUSE button at the point you wish to start recording. VCR DVD STOP PLAY REC/OTR REC/OTR CHANNEL (TRACKING) 9-b DUBBING OUTPUT SELECT 8-a 7-b 8-b Note 8-b Press DUBBING button on the front of the unit. DVD to VCR duplication will start. 9-b Press STOP/EJECT C A button on the unit or STOP C button on the remote control to stop the recording. • When you turn off the unit after setting the Dubbing Mode to , the setting will be set to automatically. • Dubbing Mode is available only if the videotape or disc is not copy protected. • You cannot change the output mode during VCR to DVD or DVD to VCR duplication. For VCR to DVD duplication: • The playback sound mode is followed by the setting of VCR playback sound mode on page 96. Set the playback sound mode to which you wish to record to the DVD. Recording Before you start Finalizing the discs Video VR DVD-RW DVD-RW DVD-R POWER 1 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE Connections You will need to finalize the discs recorded in Video mode to play in other DVD players. tons, then press ENTER button. Finalizing will start. CH VIDEO/TV SLOW 0 DISPLAY 58% STOP To cancel finalizing... Disc Edit Format Finalize Disc Protect OFF ON Finalizing is complete. * VR mode only Select “Finalize” using K / L buttons, then press ENTER button. Option window will appear. 100% Finalizing Disc This operation may take a while to be completed. Format Finalize Disc Protect OFF ON Yes No CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP SKIP CM SKIP Note • Finalizing discs in Video mode automatically creates title menus. • Once you have finalized a disc recorded in Video mode, you cannot edit or record anything else on that disc. Discs recorded in VR mode can still be recorded and edited on this unit even after being finalized. • When you insert a DVD-RW disc finalized with this unit, “Undo Finalize” will appear instead of “Finalize”. Disc Edit VCR functions Edit MENU/LIST TOP MENU Changing the SETUP menu 3 ENTER REC MONITOR 4 2 3 4 Editing 5 1 TIMER PROG. Playing discs Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. • To cancel finalizing at step 4, press STOP C button, select “YES”, then press ENTER button. Finalizing is cancelled and the DVD recorder will be in stop mode. • If appear when pressing STOP button, you cannot cancel finalizing because the finalizing has been in certain progress. • When selecting “No”, press ENTER or RETURN button, finalizing will be continued. • You cannot cancel finalizing the DVD-R disc when it has been started. SETUP Recording 2 PAUSE PLAY Finalizing REC/OTR Setup Menu DVD VCR Getting started Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: Format 4 Select “Yes” using { / B but- To release the finalizing for the disc, select “Undo Finalize” at step 3. 41 Others Español Undo Finalize * VR mode only Recording Setting a disc to protect VR DVD-RW To prevent accidental recording, editing, or erasing the titles, you can protect them from DISC menu. 3 Select “Disc Protect OFF ➔ ON” using K / L buttons, then press ENTER button. Option window will appear. POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 SPACE DISPLAY SLOW DVD VCR PAUSE Edit Format Finalize PLAY Disc Protect OFF ON STOP Yes No REC/OTR 1 SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 4 Setup Menu CH VIDEO/TV 0 Disc Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. Screen: OPEN/CLOSE DEF PQRS 7 1 AUDIO SEARCH MODE RETURN SKIP SKIP CM SKIP Select “Yes” using { / B buttons, then press ENTER button. A disc will be protected. 2 3 4 2 Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. 58% Disc Writing to Disc Edit Format Finalize Disc Protect OFF ON This operation may take a while to be completed. Note • The Disc Protect setting is available only when a disc with VR mode is inserted. To cancel the disc protect: • When you insert a disc protected with this unit, “Disc Protect ON → OFF” will appear instead of “OFF → ON”. Disc Edit Format Finalize Disc Protect ON Yes OFF No To release the protect for the disc, select “Disc Protect ON → OFF” at step 3, then select “Yes”. 42 Playing discs Before you attempt to play DVD discs, read the following information. Color systems This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described below. Discs that have the following logos will play on the unit. Other Disc types are not guaranteed to play. DVDs are recorded in different color systems throughout the world.The most common color system is NTSC (which is used primarily in the United States and Canada). This unit uses NTSC, so DVDs you play must be recorded in the NTSC system.You cannot play DVDs recorded in other color systems. Disc Logo DVD VIDEO DVD-R (VIDEO mode) DVD+RW (VIDEO mode) DVD+R (VIDEO mode) CD-RW (CD-DA FORMAT, MP3 files) Hint for DVD playback The contents of DVD disc are generally divided into titles.Titles may be further subdivided into chapters. CD-R (CD-DA FORMAT, MP3 files) Start Rec. Title 1 Stop Rec. Editing Title 2 Changing the SETUP menu Note: The following discs can be played on this unit but their performance is not guaranteed : • DVD-RW Ver 1.2 / 2-4x CPRM compatible • DVD-R General Ver 2.0 / 8x Stop/Start Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 Guide to displays First: 1. Indicates a disc type and a format mode. DVD 4 1 00:00:00 3. Indicates a current channel number and an audio status of the program. :Audio : Subtitle :Angle (except VR mode) : Repeat : Marker DVD-RW Video mode SP 1:25 Rem. 5 : Search CH 1 STEREO 2 3 4. Indicates a title number, chapter number, and the time elapsed of disc play. : Noise Reduction : Zoom 43 Others Español 1 1 2. Indicates a recording speed and possible recording time. 5. Each icon means: VCR functions Press DISPLAY button to call up the display menu.This menu will give you the information on the playing disc. Some operations are available while disc is playing. Playing discs The number inside the globe refers to region of the world. A DVD labeled for a specific region can only play on the unit with the same region code. CD-DA (AUDIO CD) Recording This unit has been designed to play DVD discs with Region One (1). DVDs must be labeled for ALL regions or for Region 1 in order to play on this unit. You cannot play DVDs that are labeled for other regions. Look for the symbols below on your DVDs. If these region symbols do not appear on your DVD, you cannot play that DVD in this unit. DVD-RW (VIDEO/VR mode) Getting started Region codes Connections Playable discs Before you start Information on DVD play Playing discs Basic playback Playback Video VR DVD-RW DVD-RW DVD-R Video DVD+RW DVD+R 1 Press POWER button, then press DVD button. When you are playing a DVD, turn the TV on and be sure to select the input to which the unit is connected. 5 Press TOP MENU button to display the title menu. You can change “Original” or “Playlist” of VR mode using MENU / LIST button. Video mode: POWER 1 REC MODE REC SPEED AUDIO ABC DEF 2 3 .@/: 1 GHI JKL 5 6 TUV WXYZ 8 9 2 4 0 Press OPEN/CLOSE A button to open the disc tray. The disc tray will open. DVD VCR DISPLAY 7 3 JAN/1 1:00AM PAUSE STOP REC/OTR SETUP TIMER PROG. JAN/1 2:00AM JAN/1 4:00AM ENTER REC MONITOR 5 5 5 JAN/1 3:00AM SLOW 2 4 7 PLAY 1 2 JAN/1 12:00AM VIDEO/TV SPACE Title List 1 CH MNO 4 PQRS 7 OPEN/CLOSE MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP 6 SKIP CM SKIP VR mode: Original 3 1 Place the disc onto the disc tray with its label facing up and make sure to align the disc to the disc tray guide. JAN/1 12:00AM 4 JAN/1 3:00AM 1 2 3 JAN/1 1:00AM JAN/1 2:00AM 5 JAN/1 4:00AM MENU / LIST button Playlist disc tray guide 1 Press OPEN/CLOSE A button to close the disc tray. 3 JAN/1 1:00AM JAN/1 2:00AM Note JAN/1 12:00AM 4 This operation may take a while to be recognized. 4 1 2 JAN/1 3:00AM 5 JAN/1 4:00AM 6 Select a desired title using K / L / { / B buttons, then press ENTER button. Playback will start. • For DVD-R (Video mode) and DVD-RW (Video mode) discs which are already finalized, a title list will be displayed instead of thumbnails. Title Menu 1 JAN/1 12:24AM CH96 XP 2 3 4 5 6 7 8 7 Press STOP C button to stop playback. To eject the disc, press OPEN/CLOSE A button to open the disc tray, then remove the disc before turning off the unit. 44 • You can resume play from where you stopped playing the disc. (Resume play) Refer to page 48 for details about resume play. • Some discs may start playing automatically. Playing discs DVD-V CD MP3 1 Press POWER button, then ton to open the disc tray. The disc tray will open. POWER 1 REC MODE REC SPEED AUDIO ABC DEF 2 3 .@/: 1 GHI If you are playing a DVD-Video disc, a menu may appear. Refer to pages 46-47 for details about a disc menu. JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 SPACE OPEN/CLOSE 2 CH VIDEO/TV SLOW 0 DVD VCR DISPLAY PAUSE PLAY 5 Press STOP C button to stop STOP REC/OTR playing. SETUP TIMER PROG. ENTER REC MONITOR RETURN MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 3 Place the disc onto the disc SEARCH MODE SKIP SKIP CM SKIP Note • Some discs may start playing automatically. Playing discs For MP3 playback 1 In stop mode, press TOP MENU button to call up the MP3 menu. DISC NAME 1/ 2 • To exit the menu, press TOP MENU button again. desired folder (group) or track, then press ENTER button. When selecting track: Playback will start. This unit recommends the files recorded under the following circumstances: • Sampling frequency: 44.1kHz or 48kHz. • Constant bit rate: 112kbps - 320kbps. .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU 1 CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP SKIP 2 2 2 CM SKIP Note • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. • Files whole extension other than “.mp3 (MP3)” will not be listed in the MP3 menu. • Some unplayable folders or tracks may be listed in the MP3 menu due to the recording status. 45 Others Español When selecting the folder: The files in the folder will appear. Press K or L button to select the track or folder you want, then press ENTER button. AUDIO VCR functions 2 Press K / L buttons to select a Hints for MP3 files: • Folders are known as Groups, files are known as Tracks. • Folders are accompanied by icon. • MP3 files are accompanied by icon. Reproduction will start from the selected track and go to the next one in turn. • The system can recognize up to 255 groups (or folders) and up to 255 tracks. • The name of the group and track can be displayed in up to 32 characters. Unrecognizable characters will be replaced with asterisks. • If there are no files in the folder, “No Files” will be displayed. REC MODE REC SPEED Changing the SETUP menu FOLDER NAME 1 FOLDER NAME 2 FOLDER NAME 3 FOLDER NAME 4 FOLDER NAME 5 FOLDER NAME 6 1 FILE NAME 1 2 FILE NAME 2 POWER Editing List of MP3 Files • Press PLAY B, ENTER or B button to move to the lower hierarchies. • Press s button or RETURN button to go to the previous hierarchy. • Press STOP C button to return to the first item. Recording tray with its label facing up and make sure to align the disc to the disc tray guide. 4 5 Getting started 2 Press OPEN/CLOSE A but- playing. Playback will start. Connections press DVD button. When you are playing a DVD or an audio CD, turn the TV on and be sure to select the input to which the unit is connected. 4 Press PLAY B button to start Before you start Basic playback (cont’d) Playing discs Basic playback (cont’d) Playing discs using the disc menu DVD-V A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press MENU / LIST button. First: DVD 1 Press MENU / LIST button. The DVD main menu will appear. If the feature is not available, may appear on the TV screen. 2 Select an item using K / L / { / B buttons, then press ENTER button to confirm. Continue this step to set up all the features you want or to start playing the disc from the menu. MENU / LIST button: Displays a DVD disc menu which varies with the disc and may be the same as the ‘Title menu.’ K / L / { / B buttons: Moves the cursor around screen. POWER 2 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 1 2 3 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP SKIP CM SKIP Enter button: Selects the currently highlighted menu option. Number buttons: Selects a numbered menu option (some discs only). Press ENTER button after. 3 Press MENU / LIST button to exit the menu. Note • Menus vary among discs. Refer to the information accompanying the disc for details. 46 2 Playing discs Before you start Basic playback (cont’d) Playing discs using the title menu DVD-V DVD Press TOP MENU button. The title menu will appear. If the feature is not available, may appear on the TV screen. Select a title to play using the K / L / { / B buttons, then press ENTER button. Playback will begin at the title you selected. POWER 2 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY TOP MENU button: Displays the ‘Title menu’ of a DVD disc which varies with the disc. DVD VCR PLAY STOP REC/OTR SETUP MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP 2 SKIP CM SKIP Recording Enter button: Selects the current highlighted menu option. 1 2 3 TIMER PROG. ENTER REC MONITOR K / L / { / B buttons: Moves the cursor around screen. PAUSE Getting started 1 2 Connections Some DVDs have a title menu, which lists the titles available on them. It helps you to start playback at a specific title. First: Playing discs Number buttons: Selects a numbered menu option (some discs only). Press ENTER button after. 3 Press TOP MENU button to exit the title menu. Editing Changing the SETUP menu VCR functions Note 47 Others Español • The TOP MENU button will not always be active with all DVDs. • Menus vary among discs. Refer to the information accompanying the disc for details. Playing discs Special playback Resume play Video VR DVD-V DVD-RW DVD-RW DVD-R DVD+RW 2 Video CD DVD+R Press PLAY B button. In a few seconds, playback will resume from the point at which it stopped last.You can resume play at the same point even if you turn off the unit. MP3 You can resume play from where you stopped playing the disc last. 1 REC MODE REC SPEED POWER AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DVD VCR DISPLAY PAUSE PLAY To cancel the resume play and start playing the disc from the beginning, press STOP C button the second time while the playback is stopped. During playback, press STOP C button. The resume message will appear. Screen: STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR RETURN MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE 2 1 2 SKIP SKIP CM SKIP Note • For MP3 files, playback will resume from the beginning of the track at which playback was stopped. Resume ON Fast forward / Fast reverse DVD-V Video VR DVD-RW DVD-RW Video DVD-R DVD+RW DVD+R POWER CD 1 g g x40 AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 During playback, press D or E button. Every time you press D or E button, approximate speed will be changed as follows. For DVD discs, sound will be output during fast forward in x2 only if you set “Fast Forward with Audio” to “ON” for the “Playback” setting in the SETUP menu. Fast forward or fast reverse playback across titles (for DVD discs) or tracks (for MP3) is not possible. h x20 h g x5 h Normal speed playback g h g OPEN/CLOSE x2 h x20 h DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 1 STOP REC/OTR REC MONITOR SETUP TIMER PROG. 1 1 ENTER Note g For Audio CDs, approximate speed is fixed at x8 with sound. For MP3 files, approximate speed is fixed at x16. To return to the normal playback, press PLAY B button. 48 REC MODE REC SPEED MP3 x40 • Forward/reverse speed will be indicated with icons as follows. Forward (Approx. Speed) x2: x20: x40: Reverse (Approx. Speed) x5: x20: x40: Playing discs Before you start Special playback (cont’d) Skipping TV commercials during play Video VR DVD-RW DVD-RW DVD-R e.g. Press CM SKIP button once SPACE SLOW 0 Video DVD+R DVD+RW PLAY STOP REC/OTR CM Skip 30 sec. SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU 1 CLEAR/C.RESET ZOOM (forwarding 30 seconds.) SEARCH MODE RETURN SKIP SKIP Getting started CM SKIP 1 Recording During playback, press CM SKIP button. Normal playback will start at 30 seconds ahead from the point you press CM SKIP button. Every time you press CM SKIP button, the searching point will be extended by 30 seconds ahead. You can press up to 6 times (180 seconds). PAUSE Connections You can skip TV commercials by pressing CM SKIP button, so that you can enjoy the recorded programs without interrupting. DVD VCR DISPLAY B Playback will restart automatically. Video VR DVD-V DVD-RW DVD-RW DVD-R DVD+RW Video CD DVD+R MP3 2 Press PLAY B button to resume play. POWER During playback, press PAUSE F button. Playback will pause and sound will be muted. AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE CH VIDEO/TV SLOW 0 DISPLAY 2 DVD VCR PAUSE 1 Editing 1 REC MODE REC SPEED Playing discs Pause PLAY SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE Changing the SETUP menu STOP REC/OTR RETURN SKIP SKIP CM SKIP VCR functions Others Español 49 Playing discs Special playback (cont’d) Step by step playback DVD-V Video VR DVD-RW DVD-RW DVD-R DVD+RW SPACE 2 Video DVD+R During playback, press PAUSE F button. Playback will pause and sound will be muted. DVD VCR DISPLAY Press SKIP G button repeatedly. The playback will advance one frame (or step) at a time when you press the SKIP G button with the sound muted. 1 SLOW 0 PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU RETURN CLEAR/C.RESET ZOOM To play step by step backward: Press SKIP H button repeatedly. Every time you press the button, the playback will go backward by one frame. SEARCH MODE 1 3 SKIP SKIP CM SKIP 2 3 Press PLAY B button to resume play. Slow forward / Slow reverse play DVD-V Video VR DVD-RW DVD-RW Video DVD-R DVD+R DVD+RW 1 POWER During playback, press PAUSE k button, then press D or E button. Every time you press D or E button, approximate speed will be changed as follows. (The sound will remain muted.) REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE CH VIDEO/TV SLOW 0 DISPLAY g g x1/4 h x1/8 h g x1/16 g Pause h h g x1/16 h DVD VCR PAUSE g x1/8 To return to the normal playback, press PLAY B button. h x1/2 PLAY 1 STOP REC/OTR SETUP REC MONITOR MENU/LIST TOP MENU TIMER PROG. 1 1 1 ENTER RETURN Note • Forward/reverse speed will be indicated with icons as follows. Forward (Approx. Speed) x1/16: x1/8: x1/2: Reverse (Approx. Speed) x1/16: x1/8: x1/4: 50 Playing discs Zoom REC/OTR DVD-V Video VR DVD-RW DVD-RW Video DVD-R DVD+RW DVD+R 1 x1.2 01:23:45 x1.5 1 SKIP SKIP CM SKIP Select a desired zoom position using K / L / { / B buttons, then press ENTER button. The zoom play will start. • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To remove the zoom menu, press ZOOM button again at step 1. • To cancel the zoom function, select x1.0 using { / B buttons, then press ENTER button. Marker Setup VR DVD-RW DVD-RW Screen for DVD: Video 1 1 DVD-Video 01:23:45 DVD+R REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 1 2 3 4 5 6 AUDIO 7 DEF SPACE CD OPEN/CLOSE Playing discs POWER Video Recording There are four options (x1.0,x1.2,x1.5 and x2.0), these are displayed excluding the current zoom rate. DVD+RW SEARCH MODE Note x2.0 3 DVD-R CLEAR/C.RESET ZOOM 2 3 DVD-Video B DVD-V RETURN Getting started 1 ENTER MENU/LIST TOP MENU Connections During playback, press ZOOM button. Zoom menu will appear. Screen: TIMER PROG. REC MONITOR 2 Select a desired zoom factor to zoom using { / B buttons, then press ENTER button. The zoom area will be displayed. 1 SETUP Before you start Special playback (cont’d) CH VIDEO/TV SLOW 0 1 1 STOP Screen for CD: 1 01:23:45 1 01:23:45 2 3 4 5 6 SEARCH MODE CM SKIP RETURN SKIP SKIP 2 3 4 Note ber using { / B buttons. When it reaches the desired point, press ENTER button. select the desired marker number using { / B buttons, then press ENTER button. Others Español 4 To return to the marker later, • To clear a marker, select the marker number to be cleared, then press CLEAR/C.RESET button. • All markers will be erased when you operate these operations listed below. – Opening the disc tray. – Turning off the power. – Recording to a recordable disc. – Changing the mode between Original and Playlist.(VR mode) •You can mark up to 6 points. 51 VCR functions 3 Select a desired marker numSelect icon using { / B buttons, then press ENTER button. Marker setup menu will appear. MENU/LIST TOP MENU Audio CD CLEAR/C.RESET ZOOM 1 TIMER PROG. ENTER REC MONITOR DVD-Video 2 SETUP Changing the SETUP menu 1 PAUSE PLAY REC/OTR During playback, press DISPLAY button. The display menu will appear. Screen: DVD VCR Editing This feature allows you to assign a specific point on a disc to be called back later. DISPLAY Playing discs Search Title/Chapter search DVD-V Video VR DVD-RW DVD-RW Video DVD-R DVD+RW DVD+R POWER Using SKIP H / G buttons 1 During playback, press SKIP G button to skip the current title or chapter and move to the next. The title or chapter will move forward one at a time. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 To go back to the previous title or chapter, press SKIP H button.The title or chapter will move backward one title at a time. DVD VCR DISPLAY PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR RETURN MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP POWER REC MODE REC SPEED SKIP SKIP 1 Using DISPLAY button 1 During playback, press DISPLAY button. The display menu will appear. Screen: 1 1 01:23:45 2 DVD-Video AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 1 DISPLAY DVD VCR PAUSE PLAY 2 Select icon using { / B buttons, then press ENTER button. ‘T’ for title will be highlighted. STOP REC/OTR 52 TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE Title: Enter a desired title number to search using K / L buttons or number buttons, then press ENTER button. Title search will start. Chapter: To move to ‘C’ for chapter, press B button. Enter a desired chapter number to search using K / L buttons or number buttons, then press ENTER button. Chapter search will start. SETUP CM SKIP RETURN SKIP SKIP 2 Playing discs Before you start Search (cont’d) Track search CD MP3 Using SKIP H / G buttons REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU During playback, press SKIP G button to skip the current track and move to the next. The track will move forward one at a time. RETURN CLEAR/C.RESET ZOOM SEARCH MODE SKIP SKIP CM SKIP 1 Using DISPLAY button SPACE Getting started To go back to the previous track, press SKIP H button.The track will move backward one at a time. SLOW 0 1 During playback, press DISPLAY button. The display menu will appear. Screen: VCR DISPLAY 1 DVD STOP REC/OTR SETUP TIMER PROG. ENTER Audio CD MENU/LIST TOP MENU RETURN CLEAR/C.RESET ZOOM SEARCH MODE SKIP 2 3 SKIP CM SKIP Playing discs 2 Select icon using { / B buttons, then press ENTER button. ‘T’ for track will be highlighted. 3 Editing Enter a desired track number to search using K / L buttons or number buttons, then press ENTER button. Track search will start. Time search POWER VR DVD-RW DVD-RW DVD-R DVD+RW Video DVD+R CD 1 1 1 01:23:45 DVD-Video 1 01:23:45 Audio CD .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DEF SPACE Enter a desired time to search using K / L buttons or number buttons, then press ENTER button. Time search will start. CH VIDEO/TV SLOW 0 DISPLAY 1 DVD VCR PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR 3 OPEN/CLOSE MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 2 3 Note • Time search function is available only in the same track or title. 53 Others Español Screen for CD: Select icon using { / B buttons, then press ENTER button. ‘T’ for title or track will be highlighted. To move to the clock icon, press B button. AUDIO VCR functions During playback, press DISPLAY button. The display menu will appear. Screen for DVD: 2 REC MODE REC SPEED Changing the SETUP menu Video DVD-V Recording 01:23:45 PAUSE PLAY REC MONITOR 1 Connections 1 Playing discs Repeat/Random/Program play Repeat play Video VR DVD-V DVD-RW DVD-RW DVD-R DVD+RW Video CD DVD+R MP3 1 During playback, press DISPLAY button. The display menu will appear. 1 1 01:23:45 DVD-Video 2 Select icon using { / B buttons, then press ENTER button. Repeat menu will appear. Screen: 1 1 01:23:45 DVD-Video OFF Title Chapter A-B 2 00:00:30 Audio CD OFF Track All A-B 114 00:00:30 MP3 OFF Track All Group REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 POWER 3 Select a desired option to repeat using K / L buttons, then press ENTER button. The selected repeat play will start. Title: The current title will be played repeatedly. (DVD only) PQRS 7 SPACE 1 DVD 1 Press SETUP button to display SETUP/CD menu. SETUP/CD menu will appear. Screen: A-B: The A-B point will be played repeatedly. When pressing ENTER button while A-B is highlighted, the starting point (A) will be decided. Press ENTER button again to select the ending point (B). Track: The current track will be played repeatedly. (CD, MP3 only) Group: The current group will be played repeatedly. (MP3 only) 54 PAUSE TIMER PROG. ENTER MENU/LIST TOP MENU RETURN CLEAR/C.RESET ZOOM SEARCH MODE SKIP SKIP CM SKIP • The A-B Repeat playback can only be set within the current title (for DVDs), or current track (for Audio CDs). • To cancel the repeat playback, select OFF at step 2.The repeat setting will also be cancelled when you stop playback. • You cannot select “Group” during the random playback of MP3 files. TUV WXYZ 8 9 SPACE VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 1 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU RETURN CD Playback Mode Random Play CLEAR/C.RESET ZOOM Program Play K / L buttons, then press ENTER button. Random playback will start. 2 3 Note 2 Select “CD” using { / B buttons, then press ENTER button. CD Playback Mode menu will appear. SETUP REC MONITOR All: The current disc will be played repeatedly (CD, MP3 and DVDRW (VR mode) only). 3 Select “Random Play” using Setup Menu SLOW DVD STOP REC/OTR 7 With this function, you can play a disc randomly instead of playing it in the original order. First: VIDEO/TV PLAY PQRS MP3 CH 0 VCR DISPLAY Chapter: The current chapter will be played repeatedly. (DVD only) Random play CD OPEN/CLOSE SEARCH MODE CM SKIP SKIP SKIP 2 3 Note • To cancel random playback, press STOP C button twice during random playback. • “Playmode OFF” appears on the screen. Playing discs Before you start Repeat/Random/Program play (cont’d) Program play CD DVD 1 3 Select “Program Play” using K / L buttons, then press ENTER button. Program play list will appear. POWER 4 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DEF SPACE SLOW 0 CD Playback Mode > Program Play DISPLAY DVD VCR -- -- -- -- -- -- -- -- -- -- 5 PLAY -- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- -- Total 00:00:00 STOP 1 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE Select a desired track using K / L buttons, then press ENTER button or B button. A cursor will move to the next. SKIP 2 3 4 Playing discs Select “CD” using { / B buttons, then press ENTER button. CD Playback Mode menu will appear. CM SKIP RETURN SKIP CD Playback Mode > Program Play 07 - - - - - - - - - - - - - - - - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --- Total Recording 4 2 PAUSE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Setup Menu CH VIDEO/TV Getting started Press SETUP button to display SETUP/CD menu. SETUP/CD menu will appear. Screen: OPEN/CLOSE Connections You can program the disc to play in your desired order. First: 00:04:30 CD Playback Mode Editing Random Play Program Play 5 Note Others Español 55 VCR functions • To erase tracks you selected, press CLEAR/C.RESET button. • You can make program settings up to 50. • To cancel program playback, press STOP C button twice during program playback. • “Playmode OFF” appears on the screen. • You may also select a desired track using Number buttons at step 4. Changing the SETUP menu Press PLAY B button to start program playback. Program playback will start. Playing discs Selecting the format of audio and video You can select the format of audio and video as you prefer depending on the contents of the disc you are playing. Switching audio soundtrack VR DVD-V DVD-RW When playing a DVD-Video disc recorded with two or more soundtracks (these are often in different languages), you can switch between them anytime during playback. On DVD-RW discs recorded in VR mode, you can switch to main (L), sub audio (R) or a mix of both (L/R). 1 During playback, press DISPLAY button. The display menu will appear. Screen: 1 1 01:23:45 <DVD-RW VR mode> POWER 1 1 00:00:00 1 Dolby Digital Dual L/R 2 Dolby Digital 2ch ---- Select icon using { / B buttons, then press ENTER button. Audio menu will appear. <DVD-Video> 1 Dolby Digital 5.1ch English 2 Dolby Digital 2ch Japanese 56 2 3 JKL MNO 4 5 6 OPEN/CLOSE DEF TUV WXYZ 8 9 SPACE CH VIDEO/TV SLOW 0 DISPLAY 1 DVD VCR PAUSE PLAY STOP 3 REC/OTR SETUP Select a desired audio soundtrack using K / L buttons, then press ENTER button. Audio soundtrack will switch. TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 2 3 4 <DVD-RW VR mode> DVD-Video 2 00:00:00 ABC GHI 7 1 00:00:00 1 Dolby Digital Dual 2 Dolby Digital 2ch 1 AUDIO .@/: 1 PQRS 1 1 DVD-RW VR Original REC MODE REC SPEED DVD-Video DVD-RW VR Original L/R L R 4 Select a desired audio channel using K / L buttons, then press ENTER button. Audio channel will switch. Note • Some discs will only allow you to change the soundtrack from the disc’s menu. Press TOP MENU button or MENU / LIST button to display the disc’s menu. • On DVD-RW discs recorded in VR mode that may have both a main and a sub audio channel, you can switch to main (L), sub audio (R), or a mix of both (L/R). • This unit CANNOT record in both stereo and SAP (Secondary Audio Program) at the same time. Playing discs Before you start Selecting the format of audio and video (cont’d) CD MP3 1 2 POWER Select icon using { / B buttons, then press ENTER button. Audio menu will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE Connections When playing Audio CDs or MP3 files you can switch between stereo, just the left channel or just the right channel. DEF SPACE CH VIDEO/TV SLOW 0 1 Audio CD 00:00:00 1 3 Select a desired audio channel using K / L buttons, then press ENTER button. Audio channel will switch. DVD VCR DISPLAY PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU 1 00:00:00 PAUSE RETURN Audio CD CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP POWER REC MODE REC SPEED SKIP 2 3 Recording L/R L R SKIP Playing discs Switching subtitles VR DVD-V DVD-RW 2 Select icon using { / B buttons, then press ENTER button. Subtitle menu will appear. .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 1 DEF SPACE 1 00:00:00 DVD-Video 1 DISPLAY OFF 1 English 2 Japanese SLOW DVD VCR STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU DVD-Video SEARCH MODE Select a desired subtitle language using K / L buttons, then press ENTER button. Subtitle will be displayed in the selected language. SKIP 2 3 Note • Some discs will only allow you to change the subtitle from the disc’s menu. Press TOP MENU button or MENU / LIST button to display the disc’s menu. • If a 4-digit language code appears in the subtitle menu at step 2, please refer to the Language code on page 101. 57 Others Español When selecting “OFF,” subtitle will disappear. CM SKIP RETURN SKIP VCR functions 3 PAUSE PLAY CLEAR/C.RESET ZOOM 01:23:45 CH VIDEO/TV Changing the SETUP menu During playback, press DISPLAY button. The display menu will appear. Screen: 1 OPEN/CLOSE 0 1 1 AUDIO Editing Many DVD Video discs have subtitles in one or more languages. The case usually tells you which subtitle languages are available. You can switch subtitle languages anytime during playback. Getting started During playback, press DISPLAY button. The display menu will appear. Screen: Playing discs Selecting the format of audio and video (cont’d) Switching camera angles DVD-V Some DVD Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with an angle icon if it contains multi-angle scenes. 2 1 1 01:23:45 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 1 During playback, press DISPLAY button. The display menu will appear. Screen: 1 POWER Select icon using { / B buttons, then press ENTER button. Angle will switch each time you press ENTER button. DVD VCR DISPLAY PAUSE PLAY STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU DVD-Video RETURN CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP POWER REC MODE REC SPEED SKIP 2 SKIP Angle icon appears when a switching camera angle is available. Reducing block noise DVD-V Video VR DVD-RW DVD-RW Video DVD-R DVD+RW 1 1 00:00:00 DVD+R OFF Type 1 Type 2 1 .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS 7 1 1 01:23:45 DVD-Video TUV WXYZ 8 9 Select icon using { / B buttons, then press ENTER button. Noise Reduction menu will appear. CH VIDEO/TV SLOW 0 1 DISPLAY DVD VCR PAUSE PLAY STOP 3 Select a desired option using K / L buttons, then press ENTER button. Your setting will be activated. 2 OPEN/CLOSE DEF SPACE During playback, press DISPLAY button. The display menu will appear. Screen: 58 AUDIO DVD-Video This function reduces noise in the playback picture.When playing back discs recorded in long time mode such as SLP or SEP mode, select "Type 1" or "Type 2". ("Type 2" is more effective.) When playing back discs with a few noises such as DVD-Video discs, select "OFF". REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 2 3 Editing Editing discs in Video mode Title list allows you to check the titles recorded on the disc easily.You can choose a title to play from this screen and easily edit the titles as you prefer. You can edit discs in Video mode for the following items. Be sure that once you edit titles, they will not remain as recorded originally. • Deleting titles (Refer to page 61) • Putting names on titles (Refer to pages 62-63) • Setting or clearing chapter markers (Refer to page 64) Disc > Edit > Original 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 5 6 JAN/1 5:00AM JAN/1 6:00AM 4 JAN/1 4:00AM 1 Note 2 7 • Once a disc is finalized, editing the disc or recording to the disc will not be available. (Except DVD-RW discs in VR mode.) • A playlist is not available with the DVD-R discs and DVD-RW discs in Video mode. Getting started 1 Connections Guide to a title list Before you start Information on disc editing Disc > Edit > Original JAN/1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Recording 1 XP 0:01:25 6 5 Playing discs 8 3 4 Editing 1. Titles recorded on the disc can be selected to edit by pressing ENTER button with the cursor on the title. 2. Protect icon, which appears when the title has been protected. 3. The selected title thumbnails from the title list. • The selected title will be played back automatically. • The sound will be muted. 4. The menus in here for editing titles as you prefer.The available menus depends on the disc type and the format type. 5. The details of the title, which can be changed to the title name you will edit. 6. Time status bar of the title. 7. The arrow icon, which means the title list includes a next or a previous page. Press B or { button by following direction of the icon. 8. Playback status of the current disc. Changing the SETUP menu VCR functions Others Español 59 Editing Information on disc editing (cont’d) Editing discs in VR mode For discs in VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the original. Editing original titles Editing playlists The following items can be used to edit the original titles. • Deleting titles (Refer to page 65) • Deleting parts of titles (Refer to pages 66-67) • Putting names on titles (Refer to pages 67-68) • Setting or clearing chapter markers (Refer to pages 69-70) • Setting pictures for thumbnails (Refer to pages 70-71) • Setting titles to protect (Refer to page 72) • Releasing titles from protecting (Refer to page 73) You can create a playlist from original titles, so that you can edit as you prefer without losing original titles. The following items you can edit with a playlist. • Deleting titles (Refer to page 74) • Deleting parts of titles (Refer to pages 75-76) • Putting names on titles (Refer to pages 76-77) • Setting or clearing chapter markers (Refer to pages 78-79) • Setting pictures for thumbnails (Refer to pages 79-80) • Adding titles to a playlist (Refer to page 81) • Deleting a playlist (Refer to page 82) Note • Original titles once edited will not remain as recorded originally.When you want to leave the original as it is, edit the playlist as you prefer. 60 Editing Before you start Editing DVD-RW discs in Video mode Deleting titles Video DVD-RW 3 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 DISPLAY 1 DEF CH VIDEO/TV SLOW DVD VCR PAUSE PLAY XP 1 6 STOP REC/OTR SETUP MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 1 2 3 4 5 Playing discs Disc > Edit 1 Title Delete Edit Title Name Chapter Mark Yes 2 JAN/ 1 1:00AM CH12 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 0:01:25 5 Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Edit 5 1 JAN/1 4:00AM Changing the SETUP menu Disc > Edit No XP Editing Select “Edit” using K / L buttons, then press ENTER button. Titlelist will appear. Screen: Recording 4 TIMER PROG. ENTER REC MONITOR Getting started Title Delete Edit Title Name Chapter Mark Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Finalize ABC GHI Disc > Edit 0:01:25 Format .@/: 1 OPEN/CLOSE 0 JAN/ 1 1:00AM CH12 Edit AUDIO SPACE 1 Disc REC MODE REC SPEED 7 DVD Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. POWER Connections You can delete titles which you do not need anymore. Be sure to know that the titles once deleted cannot be brought back to the disc. When the last title in the title list in Video mode is deleted, the disc space to record will be increased. First: Title Delete Edit Title Name Chapter Mark JAN/1 5:00AM VCR functions Yes JAN/ 1 1:00AM CH12 No XP Writing to Disc This operation may take a while to be completed. After writing to disc is completed, press SETUP button to exit DISC menu. 61 Others Español 6 Editing Editing DVD-RW discs in Video mode (cont’d) Putting names on titles Video DVD-RW You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. First: DVD 4 Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. POWER 5 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DVD VCR DISPLAY PAUSE Disc > Edit > Edit Title Name 1 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. ABC abc 123 @!? PLAY STOP 1 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU 0:01:25 CLEAR/C.RESET ZOOM Disc SEARCH MODE Edit 1 2 3 4 5 JAN/ 1 1:00AM CH12 XP RETURN SKIP SKIP CM SKIP 5 Format Finalize To enter a title name, follow the steps of "Guide to edit title name" on this page. character set Disc > Edit > Edit Title Name 2 1 Select “Edit” using K / L buttons, then press ENTER button. Titlelist will appear. Screen: ABC abc 123 @!? JAN/ 1 1:00AM CH12 XP 0:01:25 [ Guide to edit title name ] [Step1]: Select a desired character set using K/ L buttons, then press ABC ENTER button. abc 123 @!? [Step2]: Press Number buttons following by the list below. Select area for entering title names Disc > Edit 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 5 JAN/1 5:00AM 3 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. Disc > Edit 1 JAN/ 1 1:00AM CH12 Title Delete Edit Title Name Chapter Mark XP 0:01:25 62 0 When you finish entering a title name, press ENTER button. ABC abc 123 @!? <space> <space> 0 <space> !”#$% &’() * + ,- ./ :; <=>? @[]^ _{|} Press 1 *1 *1 1 2 ABC abc 2 3 DEF def 3 4 GHI ghi 4 5 6 JKL jkl 5 MNO mno 6 7 8 PQRS pqrs 7 TUV tuv 8 9 WXYZ wxyz 9 *1 Press 1 button, character set will be changed to the " @!? " mode automatically. • To delete letters, press CLEAR/C.RESET button repeatedly. Holding CLEAR/C.RESET button to delete all letters. • To go on to the next entering area for letters, press B button. • You can enter up to 30 letters. Editing Before you start Editing DVD-RW discs in Video mode (cont’d) 6 POWER REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE Connections Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE Disc > Edit > Edit Title Name ABC abc 123 @!? Yes No PLAY 7 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR abc Writing to Disc MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SKIP 6 SKIP CM SKIP Recording This operation may take a while to be completed. SEARCH MODE RETURN Getting started 1 7 Playing discs After writing to disc is completed, press SETUP button to exit DISC menu. Editing Changing the SETUP menu VCR functions Others Español 63 Editing Editing DVD-RW discs in Video mode (cont’d) Setting or clearing chapter markers Video DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can set chapter markers at a specified time you selected for titles with more than 5 minutes. First: 4 POWER Select “Chapter Mark” using K / L buttons, then press ENTER button. Option window will appear. 3 MNO 4 5 6 PQRS TUV WXYZ 8 9 Disc > Edit DISPLAY Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. JAN/ 1 1:00AM CH12 Title Delete OFF Edit Title5Name minutes Chapter 10Mark minutes 15 minutes 30 minutes 60 minutes DEF CH VIDEO/TV SLOW XP 0:01:25 DVD VCR PAUSE PLAY 1 7 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 5 SEARCH MODE Select a desired time using K / L buttons, then press ENTER button. Option window will appear. Finalize 2 JKL OPEN/CLOSE 0 1 Format ABC GHI SPACE 1 Edit AUDIO .@/: 1 7 DVD Disc REC MODE REC SPEED CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 Disc > Edit 1 2 Select “Edit” using K / L buttons, then press ENTER button. Titlelist will appear. Screen: Disc > Edit 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 5 JAN/1 5:00AM 3 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. Disc > Edit 1 JAN/ 1 1:00AM CH12 Title Delete Edit Title Name Chapter Mark XP 0:01:25 64 Title Delete OFF Edit Title5Name minutes Chapter 10Mark minutes 15 minutes 30 minutes 60 minutes Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 6 Select “Yes” using { / B buttons, then press ENTER button. A chapter marker will be added. If you select “OFF” at step 5, all the chapter markers will be erased. 7 After writing to disc is completed, press SETUP button to exit DISC menu. Note • You cannot select a time for putting markers beyond a length of a title. • The length of chapters may be slightly longer or shorter than the one specified at the step 5. • A chapter marker may be delayed according to the recording content. Editing Before you start Editing DVD-RW discs in VR mode (Original) Deleting titles VR DVD-RW 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DISPLAY Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON XP 0:01:25 DVD VCR 1 7 STOP REC/OTR SETUP MENU/LIST TOP MENU SEARCH MODE Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. Format Finalize Disc Protect OFF ON TIMER PROG. ENTER REC MONITOR CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 Playing discs Disc > Edit > Original 1 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Protect OFF ON Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 Editing 6 Disc > Edit Original Disc > Edit > Original 1 3 Yes JAN/ 1 1:00AM CH12 No XP Writing to Disc This operation may take a while to be completed. 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 7 5 JAN/1 5:00AM . After writing to disc is completed, press SETUP button to exit DISC menu. 65 Others Español 1 JAN/1 4:00AM Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Protect OFF ON VCR functions Select “Original” using { / B buttons, then press ENTER button. Original list will appear. 4 Changing the SETUP menu Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Edit > Original Recording 5 PAUSE PLAY CLEAR/C.RESET ZOOM Edit SLOW Getting started 1 CH VIDEO/TV 0 Disc > Edit > Original 1 OPEN/CLOSE DEF SPACE DVD Disc AUDIO Connections When a title is deleted from an original list in VR mode, the disc space to record will be increased. Be advised that the titles once deleted cannot be brought back to the disc. First: Editing Editing DVD-RW discs in VR mode (Original) (cont’d) Deleting parts of titles VR DVD-RW You can delete part of a title, the disc space to record will be increased. Be advised that the parts once deleted cannot be brought back to the disc. First: 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. Format Finalize 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON XP 0:01:25 3 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Disc > Edit > Original 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 66 Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Protect OFF XP 0:00:55 6 Use SKIP H / G, E, D, PLAY B, and PAUSE F buttons to decide the start point, then press ENTER.Then use SKIP H / G, E, D, PLAY B, and PAUSE F buttons again to move to the end point, and press ENTER. Press ENTER again to start the preview. A cursor will move to “Preview.” You can check the preview by pressing ENTER. The bar at the bottom of the screen indicates the total and the elapsed time of the title, and the area selected for deletion will be indicated in red during the preview. Before editing 5 JAN/1 5:00AM 6 PQRS TUV WXYZ 8 9 DISPLAY CH VIDEO/TV SLOW DVD VCR Edited Start point End point PAUSE 6 PLAY 1 5 <Preview> 1 5 STOP REC/OTR SETUP TIMER PROG. ENTER MENU/LIST TOP MENU JAN/ 1 1:00AM CH12 Original 4 DEF CLEAR/C.RESET ZOOM 1 Disc > Edit 3 MNO REC MONITOR Disc > Edit > Original Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: 2 JKL OPEN/CLOSE 0 Disc Protect OFF ON 2 ABC GHI SPACE Select “Scene Delete” using K / L buttons, then press ENTER button. Option window will appear. Edit AUDIO .@/: 1 7 1 Disc REC MODE REC SPEED Disc > Edit > Original DVD Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. POWER SEARCH MODE 6 CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) 7 POWER ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 7 OPEN/CLOSE DEF CH VIDEO/TV SLOW 0 1 Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Protect OFF Yes JAN/ 1 1:00AM CH12 No No PAUSE PLAY 9 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR XP Writing to Disc XP DVD VCR DISPLAY MENU/LIST TOP MENU RETURN 0:01:25 CLEAR/C.RESET ZOOM This operation may take a while to be completed. 8 SKIP SKIP CM SKIP Note 9 After writing to disc is completed, press SETUP button to exit DISC menu. Putting names on titles VR DVD-RW DVD 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: POWER REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE Editing You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. First: Playing discs • You cannot select “Scene Delete” when the number of chapter markers in the original or playlist is more than 900. Recording Select “Yes” using { / B buttons, then press ENTER button. Selected area will be deleted, and a chapter marker is created automatically where deletion is performed. SEARCH MODE 7 8 Getting started Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete Protect OFF Yes .@/: 1 PQRS Disc > Edit > Original JAN/ 1 1:00AM CH12 AUDIO SPACE Disc > Edit > Original 1 REC MODE REC SPEED Connections Select “Delete” using K / L buttons, then press ENTER button. Option window will appear. If the thumbnail of the title is in the deleted area, the thumbnail will be set to the first picture of the title. Playback will start from the newly created chapter marker. CH VIDEO/TV SLOW 0 DISPLAY 1 PAUSE PLAY Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. 1 STOP REC/OTR SETUP Original MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE RETURN SKIP SKIP 1 2 CM SKIP Edit Format Finalize Disc Protect OFF ON 67 Others Español Instructions continue on page 68. VCR functions Disc TIMER PROG. ENTER REC MONITOR Changing the SETUP menu Disc > Edit DVD VCR Editing Editing DVD-RW discs in VR mode (Original) (cont’d) 3 Select “Original” using { / B buttons, then press ENTER button. Original list will appear. 6 To enter a title name, follow the steps of "Guide to edit title name" on this page. character set POWER 6 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF CH VIDEO/TV SPACE Disc > Edit > Original > Edit Title Name Disc > Edit > Original 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 ABC abc 123 @!? 1 JAN/ 1 1:00AM CH12 XP JAN/1 4:00AM JAN/1 5:00AM PAUSE PLAY STOP 8 5 DVD VCR DISPLAY 1 SLOW 0 REC/OTR SETUP 0:01:25 TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. Disc > Edit > Original 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON area for entering title names When you finish entering a title name, press ENTER button. SEARCH MODE 3 4 5 6 7 RETURN SKIP SKIP CM SKIP 7 Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. Disc > Edit > Original > Edit Title Name JAN/ 1 1:00AM CH12 CLEAR/C.RESET ZOOM XP 1 0:01:25 ABC abc 123 @!? [ Guide to edit title name ] [Step1]: Select a desired character set using K/ L buttons, then press ABC ENTER button. abc 123 @!? [Step2]: Press Number buttons following by the list below. Select Yes 5 No abc Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. Disc > Edit > Original > Edit Title Name 1 ABC abc 123 @!? ABC abc 123 @!? <space> <space> 0 <space> !”#$% &’() * + ,- ./ :; <=>? @[]^ _{|} Press 0 Writing to Disc This operation may take a while to be completed. 8 After writing to disc is completed, press SETUP button to exit DISC menu. 1 *1 *1 1 2 ABC abc 2 3 DEF def 3 4 GHI ghi 4 5 6 JKL jkl 5 MNO mno 6 7 8 PQRS pqrs 7 TUV tuv 8 9 WXYZ wxyz 9 *1 Press 1 button, character set will be changed to the " @!? " mode automatically. JAN/ 1 1:00AM CH12 XP 0:01:25 68 • To delete letters, press CLEAR/C.RESET button repeatedly. Holding CLEAR/C.RESET button to delete all letters. • To go on to the next entering area for letters, press B button. • You can enter up to 30 letters. Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) Setting or clearing chapter markers VR DVD-RW 4 Select a desired title using K / 1 Format Finalize Disc Protect OFF ON XP 0:01:25 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM JAN/ 1 1:00AM CH12 SLOW DISPLAY DVD VCR PAUSE 6 PLAY 1 STOP REC/OTR SETUP TIMER PROG. ENTER CLEAR/C.RESET ZOOM SEARCH MODE 6 CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON XP 6 Use SKIP H / G, E, D, PLAY B, and PAUSE F buttons to decide the point at which you will create a new chapter marker. Or, use SKIP H / G to decide a chapter marker that you will delete. Select “Add” or “Delete” accordingly using K / L buttons, then press ENTER button. Option window will appear. <Add>: 1 F Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON Yes JAN/1 5:00AM No XP 0:01:25 Instructions continue on page 70. 69 Others Español JAN/ 1 1:00AM CH12 JAN/1 4:00AM 9 0:01:25 Chapter 1/1 5 8 CH VIDEO/TV Disc > Edit > Original 1 4 WXYZ VCR functions Disc > Edit > Original TUV Changing the SETUP menu Select “Original” using { / B buttons, then press ENTER button. Original list will appear. 6 PQRS Editing 3 5 Playing discs Original 4 DEF 0 5 Select “Chapter Mark” using Chapter 1/1 Disc > Edit 3 MNO MENU/LIST TOP MENU 1 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: 2 JKL REC MONITOR Disc > Edit > Original 2 ABC GHI SPACE Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON K / L buttons, then press ENTER button. Option window will appear. Edit .@/: 1 OPEN/CLOSE Recording Disc JAN/ 1 1:00AM CH12 AUDIO Getting started Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. REC MODE REC SPEED 7 Disc > Edit > Original DVD 1 POWER L / { / B buttons, then press ENTER button. Original menu will appear. Connections You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the original list comes to 999 in total, you cannot add any more chapter markers. First: Editing Editing DVD-RW discs in VR mode (Original) (cont’d) <Delete>: This operation may take a while to be completed. Disc > Edit > Original POWER 1 Chapter 2/2 F Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON Yes JAN/ 1 1:00AM CH12 No XP The chapter marker which you selected will be deleted. <Delete>: REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS 7 1 Chapter 2/2 7 1 Chapter 1/1 Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON Yes JAN/ 1 1:00AM CH12 WXYZ 8 9 JAN/ 1 1:00AM CH12 SLOW Title Delete Scene Delete Edit Title Name ChapterAdd Mark Delete Index Picture Protect OFF ON No XP DVD VCR DISPLAY Yes Disc > Edit > Original TUV CH VIDEO/TV 0 Disc > Edit > Original • You cannot delete the first chapter marker of each title. OPEN/CLOSE DEF SPACE 0:01:25 Select “Yes” using { / B buttons, then press ENTER button. When you select “Add” at step 6, a new chapter marker will be created at the point you have decided. When you select “Delete” at step 6, the chapter marker you have selected will be deleted. <Add>: AUDIO PAUSE PLAY 8 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR Writing to Disc MENU/LIST TOP MENU RETURN CLEAR/C.RESET ZOOM This operation may take a while to be completed. SEARCH MODE CM SKIP POWER REC MODE REC SPEED SKIP 7 SKIP 8 After writing to disc is completed, press SETUP button to exit DISC menu. No XP Writing to Disc Setting pictures for thumbnails VR DVD-RW You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing.The beginning picture has been selected as the default. First: DVD 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE Disc > Edit 1 PLAY Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. STOP 1 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU Original CLEAR/C.RESET ZOOM SEARCH MODE Disc RETURN SKIP SKIP 1 2 CM SKIP Edit Format Note Finalize Disc Protect OFF ON 70 • If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected. Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) 3 POWER Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set. 2 3 JKL MNO 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM OPEN/CLOSE DEF 4 5 6 PQRS TUV WXYZ 8 9 SPACE CH VIDEO/TV SLOW 0 VCR DVD PAUSE Disc > Edit > Original 1 5 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes 5 PLAY 7 No STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR JAN/1 5:00AM JAN/ 1 1:00AM CH12 XP MENU/LIST TOP MENU RETURN Writing to Disc CLEAR/C.RESET ZOOM SEARCH MODE Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON 5 CM SKIP 7 After writing to disc is completed, press SETUP button to exit DISC menu. Playing discs Disc > Edit > Original This operation may take a while to be completed. SKIP Recording 4 SKIP 3 4 5 6 Getting started 1 2 JAN/1 4:00AM ABC GHI DISPLAY 1 AUDIO .@/: 1 7 Disc > Edit > Original 4 REC MODE REC SPEED Connections Select “Original” using { / B buttons, then press ENTER button. Original list will appear. 6 XP 0:01:25 Editing 5 Changing the SETUP menu Select “Index Picture Set” using K / L buttons. Use SKIP H / G, E, D, PLAY B, and PAUSE F buttons to decide the picture you want to select as a thumbnail.Then press ENTER button. Option window will appear. VCR functions Disc > Edit > Original 1 F Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 Others Español 71 Editing Editing DVD-RW discs in VR mode (Original) (cont’d) Setting titles to protect VR DVD-RW To prevent accidental editing or erasing the titles, you can protect them from the original menu. First: DVD 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 SPACE DISPLAY 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON XP 0:01:25 Disc Edit 5 Select “Protect OFF ➔ ON” Format Finalize Disc Protect OFF ON 1 7 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: SETUP PAUSE TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON Yes JAN/ 1 1:00AM CH12 DVD STOP REC/OTR Disc > Edit > Original 1 SLOW VCR PLAY using K / L buttons, then press ENTER button. Option window will appear. 2 CH VIDEO/TV 0 Disc > Edit > Original Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. OPEN/CLOSE DEF PQRS 7 1 AUDIO CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 No XP 0:01:25 6 Disc > Edit Select “Yes” using { / B buttons, then press ENTER button. Disc > Edit > Original 1 Original 3 Yes Select “Original” using { / B buttons, then press ENTER button. Original list will appear. Disc > Edit > Original 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 72 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF ON 5 JAN/1 5:00AM JAN/ 1 1:00AM CH12 No XP Writing to Disc This operation may take a while to be completed. 7 After writing to disc is completed, press SETUP button to exit DISC menu. To protect a whole disc: Select “Disc Protect” from Disc menu, then select “Yes”. Refer to “Setting a disc to protect” on page 42. Note • The protected title will be marked with a key icon in the original list. Editing Before you start Editing DVD-RW discs in VR mode (Original) (cont’d) Releasing titles from protecting VR DVD-RW First: DVD 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Original menu will appear. 1 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE Connections You are allowed to release the titles protecting feature once protected. SPACE CH VIDEO/TV SLOW 0 Disc Edit > Original 2 JAN/ 1 2:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF XP 0:01:25 Disc Edit VCR DVD PLAY 1 7 STOP REC/OTR SETUP MENU/LIST TOP MENU Format SEARCH MODE Select “Protect ON ➔ OFF” using K / L buttons, then press ENTER button. Option window will appear. SKIP 1 2 3 4 5 6 Disc Edit > Original Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: 2 B Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF Yes JAN/ 1 2:00AM CH12 No Playing discs 2 CM SKIP RETURN SKIP Recording 5 Disc Protect OFF ON TIMER PROG. ENTER REC MONITOR CLEAR/C.RESET ZOOM Finalize PAUSE Getting started Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. DISPLAY XP 0:01:25 Disc > Edit Editing 6 Original Changing the SETUP menu Select “Yes” using { / B buttons, then press ENTER button. The key icon will disappear from the title in the original list. Disc Edit > Original 3 2 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON OFF Yes JAN/ 1 2:00AM CH12 VCR functions Select “Original” using { / B buttons, then press ENTER button. Original list will appear. No XP Writing to Disc Disc > Edit > Original 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 5 JAN/1 5:00AM This operation may take a while to be completed. 7 After writing to disc is completed, press SETUP button to exit DISC menu. 73 Others Español 1 Editing Editing DVD-RW discs in VR mode (Playlist) Deleting titles VR DVD-RW In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not be increased. First: 4 POWER Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 7 OPEN/CLOSE DEF PQRS DVD SPACE CH VIDEO/TV SLOW 0 Disc > Edit > Playlist 1 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. JAN/ 1 1:00AM CH12 DISPLAY Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set XP 0:01:25 VCR DVD Disc 5 Select “Title Delete” using K Edit Format / L buttons, then press ENTER button. Option window will appear. Finalize Disc Protect OFF ON Disc > Edit > Playlist 1 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 6 Disc > Edit Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Edit > Playlist Original 1 3 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. JAN/ 1 1:00AM CH12 No XP Writing to Disc This operation may take a while to be completed. Disc > Edit > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 5 JAN/1 5:00AM Add New Title Delete Playlist 7 After writing to disc is completed, press SETUP button to exit DISC menu. PAUSE PLAY 1 7 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 74 AUDIO SEARCH MODE CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) Deleting parts of titles VR DVD-RW 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. Finalize Disc Protect OFF ON JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set XP 0:01:25 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM JAN/1 4:00AM 5 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete PAUSE 6 PLAY 1 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR SEARCH MODE 6 CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 XP 0:00:55 6 Use SKIP H / G, E, D, PLAY B, and PAUSE F buttons to decide the start point, then press ENTER.Then use SKIP H / G, E, D, PLAY B, and PAUSE F buttons again to move to the end point, and press ENTER. Press ENTER again to start the preview. A cursor will move to “Preview.” You can check the preview by pressing ENTER. The bar at the bottom of the screen indicates the total and the elapsed time of the title, and the area selected for deletion will be indicated in red during the preview. Start point End point Before editing Add New Title Delete Playlist JAN/1 5:00AM Edited Instructions continue on page 76. 75 Others Español 4 DVD MENU/LIST TOP MENU <Preview> 1 SLOW VCR VCR functions Disc > Edit > Playlist 9 Changing the SETUP menu Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. 8 CH VIDEO/TV Editing 3 6 WXYZ Playing discs Original 5 TUV CLEAR/C.RESET ZOOM 1 Disc > Edit 4 PQRS DISPLAY 5 2 DEF 0 Disc > Edit > Playlist Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: 3 MNO Recording Format 2 JKL SPACE Select “Scene Delete” using K / L buttons, then press ENTER button. Option window will appear. Edit ABC GHI OPEN/CLOSE Getting started 1 AUDIO .@/: 1 7 1 Disc REC MODE REC SPEED Disc > Edit > Playlist DVD Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. POWER Connections You can delete a specific part of a title. Even when a title is deleted from the playlist, the original title will remain. The disc space to record will not be increased. First: Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Part of a title will be deleted. 7 Yes JAN/ 1 1:00AM CH12 Yes JAN/ 1 1:00AM CH12 0:01:25 6 TUV WXYZ 8 9 CH VIDEO/TV SLOW DVD VCR No PAUSE PLAY XP STOP 9 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR This operation may take a while to be completed. RETURN MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE SKIP SKIP CM SKIP 7 8 9 After writing to disc is completed, press SETUP button to exit DISC menu. 8 MNO 5 0 No XP JKL 4 DISPLAY Writing to Disc Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete 3 GHI DEF SPACE Disc > Edit > Playlist 1 2 7 Title Delete Scene Delete Start Edit Title Name End Chapter Mark Preview Index Picture Delete 1 ABC PQRS Disc > Edit > Playlist Select “Delete” using K / L buttons, then press ENTER button. Option window will appear. .@/: 1 Select “Yes” using { / B buttons, then press ENTER button. Note • You cannot select “Scene Delete” when the number of chapter markers in the original or playlist is more than 900. Putting names on titles VR DVD-RW You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. First: Original/PlayList menu will appear. Screen: POWER REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 DVD CH VIDEO/TV SLOW 0 DVD VCR PAUSE Original 1 PLAY Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Disc 3 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Edit Format Finalize Disc Protect OFF ON Disc > Edit > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM Select “Edit” using K / L buttons, then press ENTER button. 76 OPEN/CLOSE DEF SPACE DISPLAY 2 AUDIO Disc > Edit 5 JAN/1 5:00AM Add New Title Delete Playlist 1 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 1 2 3 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) 4 POWER Select “Yes” using { / B buttons, then press ENTER button. The name you entered will be activated for the title. 2 3 JKL MNO OPEN/CLOSE DEF 4 5 6 PQRS TUV WXYZ 8 9 SPACE CH VIDEO/TV SLOW 0 VCR DVD PAUSE Disc > Edit > Playlist > Edit Title Name 1 XP ABC abc 123 @!? Yes 0:01:25 PLAY STOP 8 REC/OTR No SETUP abc TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE 5 Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. 1 ABC abc 123 @!? JAN/ 1 1:00AM CH12 XP 0:01:25 SKIP CM SKIP This operation may take a while to be completed. 8 After writing to disc is completed, press SETUP to exit DISC menu. [ Guide to edit title name ] [Step1]: Select a desired character set using K/ L buttons, then press ABC ENTER button. abc 123 @!? [Step2]: Press Number buttons following by the list below. 0 abc 123 @!? <space> 0 <space> !”#$% &’() * + ,- ./ :; <=>? @[]^ _{|} To enter a title name, follow the steps of "Guide to edit title name" on this page. character set Disc > Edit > Playlist > Edit Title Name 1 ABC abc 123 @!? 1 *1 *1 1 2 ABC abc 2 3 DEF def 3 4 GHI ghi 4 5 6 JKL jkl 5 MNO mno 6 7 8 PQRS pqrs 7 TUV tuv 8 9 WXYZ wxyz 9 JAN/ 1 1:00AM CH12 XP 0:01:25 area for entering title names • To delete letters, press CLEAR/C.RESET button repeatedly. Holding CLEAR/C.RESET button to delete all letters. • To go on to the next entering area for letters, press B button. • You can enter up to 30 letters. 77 Others Español When you finish entering a title name, press ENTER button. VCR functions *1 Press 1 button, character set will be changed to the " @!? " mode automatically. Changing the SETUP menu ABC <space> Editing Select Press 6 Playing discs Disc > Edit > Playlist > Edit Title Name SKIP Recording 4 5 6 7 RETURN Writing to Disc Getting started JAN/ 1 1:00AM CH12 ABC GHI DISPLAY Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set AUDIO .@/: 1 7 Disc > Edit > Playlist 1 REC MODE REC SPEED Connections Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. 7 Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Setting or clearing chapter markers VR DVD-RW You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the playlist comes to 999 in total, you cannot add any more chapter markers. First: DVD Disc > Edit > Playlist POWER 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM Add New Title Delete Playlist 5 .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 7 SPACE JAN/1 5:00AM 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. DVD 1 6 STOP 1 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR JAN/ 1 1:00AM CH12 CLEAR/C.RESET ZOOM Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set XP 0:01:25 Disc Finalize Disc Protect OFF ON 5 Select “Chapter Mark” using K / L buttons, then press ENTER button. Option window will appear. Disc > Edit > Playlist 1 2 Chapter 1/1 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: Disc Setting Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture XP 0:01:25 6 Use SKIP H / G, E, D, PLAY B, and PAUSE F buttons to decide the point at which you will create a new chapter marker. Or, use SKIP H / G to decide a chapter marker that you will delete. Select “Add” or “Delete” accordingly using K / L buttons, then press ENTER button. Option window will appear. <Add>: Disc > Edit > Playlist 1 Chapter 1/1 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture F Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 PAUSE PLAY Disc > Edit > Playlist Format CH VIDEO/TV SLOW VCR MENU/LIST TOP MENU Edit OPEN/CLOSE DEF PQRS DISPLAY Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. 78 AUDIO 0 1 3 REC MODE REC SPEED SEARCH MODE 6 CM SKIP RETURN SKIP SKIP 1 2 3 4 5 6 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) <Delete>: This operation may take a while to be completed. Disc > Edit > Playlist 1 F Yes JAN/ 1 1:00AM CH12 No XP POWER The chapter marker which you selected will be deleted. <Delete>: REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 Disc > Edit > Playlist OPEN/CLOSE DEF PQRS 7 0:01:25 AUDIO Connections Chapter 2/2 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture SPACE CH VIDEO/TV SLOW 0 Chapter 2/2 7 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture Yes Disc > Edit > Playlist 1 Yes JAN/ 1 1:00AM CH12 Writing to Disc PAUSE PLAY STOP 8 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU This operation may take a while to be completed. RETURN CLEAR/C.RESET ZOOM SKIP SEARCH MODE CM SKIP POWER REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 7 SKIP 8 After writing to disc is completed, press SETUP button to exit DISC menu. Playing discs Chapter 1/1 Title Delete Scene Delete Edit Title Name ChapterAdd Mark DeleteSet Index Picture XP DVD Recording Select “Yes” using { / B buttons, then press ENTER button. When you select “Add” at step 6, a new chapter marker will be created at the point you have decided. When you select “Delete” at step 6, the chapter marker you have selected will be deleted. <Add>: JAN/ 1 1:00AM CH12 No VCR DISPLAY Getting started • You cannot delete the first chapter of each title. 1 No XP Writing to Disc Setting pictures for thumbnails VR DVD 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: PQRS 7 SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY Disc > Edit 1 STOP 1 SETUP REC MONITOR TIMER PROG. ENTER MENU/LIST TOP MENU CLEAR/C.RESET ZOOM Original Disc Edit Format Finalize Disc Protect OFF ON RETURN SKIP SKIP 1 2 Note Instructions continue on page 80. 79 Others Español • If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected. VCR functions Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. REC/OTR Changing the SETUP menu You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing.The beginning picture has been selected as the default. First: OPEN/CLOSE Editing DVD-RW Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) 3 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. 6 POWER Select “Yes” using { / B buttons, then press ENTER button. A picture for thumbnail will be set. 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 2 3 JKL MNO Add New Title Delete Playlist 5 OPEN/CLOSE DEF 4 5 6 PQRS TUV WXYZ 8 9 SPACE CH VIDEO/TV SLOW 0 VCR DVD PAUSE Disc > Edit > Playlist 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set Yes JAN/1 4:00AM ABC GHI DISPLAY 1 AUDIO .@/: 1 7 Disc > Edit > Playlist 4 REC MODE REC SPEED 5 PLAY STOP 7 No REC/OTR SETUP TIMER PROG. ENTER REC MONITOR JAN/1 5:00AM JAN/ 1 1:00AM CH12 XP MENU/LIST TOP MENU RETURN Writing to Disc CLEAR/C.RESET ZOOM SEARCH MODE 4 Select a desired title using K / L / { / B buttons, then press ENTER button. Playlist menu will appear. Disc > Edit > Playlist 1 JAN/ 1 1:00AM CH12 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set XP 0:01:25 5 Select “Index Picture Set” using K / L buttons. Use SKIP H / G, E, D, PLAY B, and PAUSE F buttons to decide the picture you want to select as a thumbnail.Then press ENTER button. Option window will appear. Disc > Edit > Playlist 1 Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Set F Yes JAN/ 1 1:00AM CH12 No XP 0:01:25 80 This operation may take a while to be completed. 7 After writing to disc is completed, press SETUP button to exit DISC menu. 5 CM SKIP SKIP SKIP 3 4 5 6 Editing Before you start Editing DVD-RW discs in VR mode (Playlist) (cont’d) Adding titles to a Playlist VR DVD-RW DVD 4 POWER Select “Add New Title” using K / L / { / B buttons, then press ENTER button. Original list will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE Connections You can add or delete a title in the playlist as you prefer. You can add titles to a Playlist up to 99. First: CH VIDEO/TV SLOW SPACE 0 Disc > Edit > Playlist > Add New Title 1 2 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. DVD VCR 3 PLAY JAN/10 10:30AM JAN/12 5:00PM JAN/12 8:00PM 1 6 Disc STOP REC/OTR SETUP MENU/LIST TOP MENU SEARCH MODE Finalize Select a desired title using K / L / { / B buttons, then press ENTER button. Disc Protect OFF ON CM SKIP RETURN SKIP SKIP 1 2 3 4 5 Recording 5 Format TIMER PROG. ENTER REC MONITOR CLEAR/C.RESET ZOOM Edit PAUSE Getting started 1 DISPLAY Disc > Edit > Playlist > Add New Title Playing discs 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: 58% Writing to Disc 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 5 6 4 JAN/1 5:00AM Changing the SETUP menu JAN/1 4:00AM Editing Disc > Edit > Playlist Disc > Edit JAN/12 8:00PM Original 6 3 Disc > Edit > Playlist 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 5 To delete a title from Playlist, refer to “Deleting titles” on page 74. To delete a Playlist, refer to “Deleting a Playlist” on page 82. Add New Title Delete Playlist JAN/1 5:00AM 81 Others Español 1 After writing to disc is completed, press SETUP button to exit DISC menu. VCR functions Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Editing Editing DVD-RW discs in VR mode (Playlist) (cont’d) Deleting a Playlist VR DVD-RW A Playlist can be deleted if no longer needed. First: DVD 1 4 POWER Select “Delete Playlist” using K / L / { / B buttons, then press ENTER button. Option window will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE CH VIDEO/TV SLOW 0 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Disc > Edit > Playlist DISPLAY 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM VCR DVD PAUSE PLAY 4 Disc JAN/1 4:00AM 5 JAN/1 5:00AM Add New Title Delete Playlist Yes No STOP 1 REC/OTR SETUP Edit TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU RETURN Format CLEAR/C.RESET ZOOM Finalize Disc Protect OFF ON SEARCH MODE 5 Select “Yes” using { / B buttons, then press ENTER button. A Playlist will be erased. 2 Select “Edit” using K / L buttons, then press ENTER button. Original/PlayList menu will appear. Screen: CM SKIP SKIP SKIP 1 2 3 4 5 The unit will be in stop mode after exiting the DISC menu automatically. Disc > Edit Original 3 Select “PlayList” using { / B buttons, then press ENTER button. Playlist will appear. Disc > Edit > Playlist 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM 82 5 JAN/1 5:00AM Add New Title Delete Playlist Note • Deleting a Playlist will not increase the available recording time on disc. Editing Before you start Editing DVD-R discs Deleting titles DVD-R Disc > Edit 1 JAN/ 1 1:00AM CH12 Title Delete Edit Title Name Chapter Mark POWER XP REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO OPEN/CLOSE DEF 4 5 6 PQRS TUV WXYZ 8 9 7 0:01:25 AUDIO Connections You can delete titles which you do not need, however the disc space to record on the disc will not be changed. Be aware to know that the titles once deleted cannot be brought back to the disc. First: SPACE CH VIDEO/TV SLOW 0 You cannot select “Chapter Mark”. DISPLAY VCR DVD PAUSE DVD 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. Select “Title Delete” using K / L buttons, then press ENTER button. Option window will appear. 1 6 STOP REC/OTR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 1 Edit Title Delete Edit Title Name Chapter Mark Format Finalize Yes JAN/ 1 1:00AM CH12 No CM SKIP RETURN SKIP SKIP 1 2 3 4 5 XP Playing discs 0:01:25 5 2 Select “Yes” using { / B buttons, then press ENTER button. Title will be deleted. Disc > Edit 1 Disc > Edit 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM Title Delete Edit Title Name Chapter Mark Yes 4 JAN/1 4:00AM JAN/ 1 1:00AM CH12 Changing the SETUP menu 1 Editing Select “Edit” using K / L buttons, then press ENTER button. Titlelist will appear. Screen: No XP Writing to Disc 5 JAN/1 5:00AM This operation may take a while to be completed. Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. VCR functions 3 Recording Disc TIMER PROG. ENTER REC MONITOR SEARCH MODE Disc > Edit SETUP Getting started PLAY 4 6 After writing to disc is completed, press SETUP button to exit DISC menu. Others Español 83 Editing Editing DVD-R discs (cont’d) Putting names on titles DVD-R You can put names on the titles and change the names from this menu. The names you put on the titles will be displayed on a titlelist. First: 4 Select “Edit Title Name” using K / L buttons, then press ENTER button. A window for entering a title name will appear. POWER 5 REC MODE REC SPEED .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 7 SPACE 1 1 Press SETUP button. Select “DISC” using { / B buttons, then press ENTER button. DISC menu will appear. SLOW VCR DISPLAY ABC abc 123 @!? JAN/ 1 1:00AM CH12 XP 0:01:25 DVD PAUSE PLAY STOP 1 7 REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 5 To enter a title name, follow Format CH VIDEO/TV 0 Disc > Edit > Edit Title Name Edit OPEN/CLOSE DEF PQRS DVD Disc AUDIO SEARCH MODE 1 2 3 4 5 6 RETURN SKIP SKIP CM SKIP the steps of "Guide to edit title name" on this page. character set Finalize Disc > Edit > Edit Title Name ABC abc 123 @!? 1 2 Select “Edit” using K / L buttons, then press ENTER button. Titlelist will appear. Screen: Disc > Edit 1 1 2 3 JAN/1 1:00AM JAN/1 2:00AM JAN/1 3:00AM 4 JAN/1 4:00AM [ Guide to edit title name ] JAN/ 1 1:00AM CH12 XP 0:01:25 area for entering title names When you finish entering a title name, press ENTER button. JAN/1 5:00AM 6 Disc > Edit > Edit Title Name 3 1 Select a desired title using K / L / { / B buttons, then press ENTER button. Edit menu will appear. ABC abc 123 @!? Yes JAN/ 1 1:00AM CH12 Title Delete Edit Title Name Chapter Mark abc Writing to Disc This operation may take a while to be completed. 7 XP 0:01:25 You cannot select “Chapter Mark”. 84 Select ABC abc 123 @!? <space> <space> 0 <space> !”#$% &’() * + ,- ./ :; <=>? @[]^ _{|} Press 1 *1 *1 1 2 ABC abc 2 3 DEF def 3 4 GHI ghi 4 5 6 JKL jkl 5 MNO mno 6 7 8 PQRS pqrs 7 TUV tuv 8 9 WXYZ wxyz 9 No Disc > Edit 1 123 @!? [Step2]: Press Number buttons following by the list below. 0 Select “Yes” using { / B buttons, then press ENTER button. 5 [Step1]: Select a desired character set using K/ L buttons, then press ABC ENTER button. abc After writing to disc is completed, press SETUP button to exit DISC menu. *1 Press 1 button, character set will be changed to the " @!? " mode automatically. • To delete letters, press CLEAR/C.RESET button repeatedly. Holding CLEAR/C.RESET button to delete all letters. • To go on to the next entering area for letters, press B button. • You can enter up to 30 letters. Changing the SETUP menu Before you start Tour of the SETUP menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. SETUP menu Audio Language Original English French Set the language for audio. Subtitle Language OFF English French Set the language for subtitle. OSD Background Transparency 100% Set the background transparency of OSD screen. OSD Background Color 1 2 3 35% 25% Set the OSD screen color. 1 (Green), 2 (Blue), 3 (Red) English Français Español Set the language for OSD (On Screen Display). Screen Saver OFF 5 minutes 10minutes Set the time to work the screen saver on the screen. Digital Out Dolby Digital PCM Stream Set the type of sound signal which outputs from the digital audio output jack. ON OFF Set whether DTS signal will be output or not. ON OFF Compressing the range of sound volume. ON OFF Outputting the sound during play in fast forward. Parental Lock ALL level 8 to 1 Set the parental level of your DVD discs. (Change password) Enter the current four-digit password Set and change the password. VCR functions Dynamic Range Control Fast Forward with Audio Changing the SETUP menu DTS Set whether the sound recorded in 96kHz will be down sampled in 48kHz. Editing Auto 48kHz 96kHz Playing discs OSD Language PCM 4.Parental setting Pages 92-93 Recording 3.Audio setting Pages 90-91 Set the language for disc menu. Getting started 2.Display setting Pages 88-89 Disc Menu Language English French Spanish Contents Connections 1.Language setting Pages 86-87 Items (highlight is the default) Note 85 Others Español • If you change the setting in SETUP menu, the information of contents stays on even when the power is switched off. Changing the SETUP menu Language setting Press STOP button if you are playing a disc. POWER 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. 4 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 1 5 Setup Menu 2 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. CM SKIP RETURN SKIP SKIP 2 3 4 Setup Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Option window will appear. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language DVD 4:3 Letter Box All English Original OFF Digital Out Dynamic Range Control ON Fast Forward with Audio OFF 4 Select a desired item using K / L buttons, then press ENTER button. Note • Only the languages supported by the disc can be selected. • Audio Language setting may not be available to some discs. • You can change or switch off the subtitles on a DVD disc also from the disc menu if it is available. 86 Changing the SETUP menu Before you start Language setting (cont’d) Disc Menu Language (Default : English) Set the language for Disc Menu. TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Setup > Playback DVD 4:3 Letter Box All English TV Aspect Original OFF Audio Language Parental Lock Disc Menu Language Subtitle Language Digital Out DVD 4:3 Letter Box All English English French Original Spanish OFF Other • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. Digital Out Dynamic Range Control ON Dynamic Range Control ON Fast Forward with Audio OFF Fast Forward with Audio OFF Setup > Playback TV Aspect Setup > Playback DVD TV Aspect Original OFF Audio Language Digital Out 4:3 Letter Box All Original English English Original French OFF Spanish Other Dynamic Range Control ON Dynamic Range Control ON Fast Forward with Audio OFF Fast Forward with Audio OFF Parental Lock Disc Menu Language Audio Language Subtitle Language Parental Lock Disc Menu Language Subtitle Language Digital Out • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. • When Original is selected, the audio language will be in the disc’s default language. Setup > Playback Setup > Playback DVD 4:3 Letter Box All English TV Aspect Disc Menu Language Audio Language Original Audio Language Subtitle Language OFF Subtitle Language TV Aspect DVD Dynamic Range Control ON Dynamic Range Control ON Fast Forward with Audio OFF Fast Forward with Audio OFF Parental Lock Disc Menu Language Digital Out Editing Digital Out 4:3 Letter Box All OFF English English Original French OFF Spanish Other Parental Lock • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. age e Code Input Audio ---ON • When you finish entering the code, press ENTER button. Refer to the language code table on page 101. VCR functions Control Changing the SETUP menu If “Other” is selected, press 4-digit code using number buttons. All English English French Original Spanish OFF Other Playing discs Subtitle Language (Default : OFF) Set the subtitle language. Recording 4:3 Letter Box All English DVD Getting started Audio Language (Default : Original) Set the Audio language. Connections Setup > Playback OFF Press SETUP button to exit SETUP menu. 87 Others Español 5 Changing the SETUP menu Display setting Press STOP button if you are playing a disc. POWER 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 1 5 Setup Menu 2 Playback Setting 3 Select “Display” using K / L / { / B buttons, then press ENTER button. Option window will appear. Setup > Display DVD OSD Background Transparency 35% OSD Background Color OSD Language 1 English Screen Saver 10 minutes Select a desired item using K / L buttons, then press ENTER button. TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU SEARCH MODE Setup 88 SETUP CLEAR/C.RESET ZOOM Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. 4 STOP REC/OTR CM SKIP RETURN SKIP SKIP 2 3 4 Changing the SETUP menu Setup > Display DVD OSD Background Transparency 35% OSD Language 1 English Screen Saver 10 minutes DVD OSD Background Transparency 35%100% 85% OSD Background Color 1 70% OSD Language English 50% Screen Saver 10 minutes 35% 25% 10% 0% • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. Setup > Display DVD Setup > Display DVD OSD Background Transparency 35% OSD Background Transparency 35% OSD Background Color OSD Background Color OSD Language 1 English Screen Saver 10 minutes Screen Saver 11 2 English 3 10 minutes Setup > Display VCR OSD Language • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. Recording OSD Language (Default : English) Set the language for OSD. Setup > Display VCR DVD OSD Background Transparency 35% OSD Background Color 1 OSD Background Color OSD Language English OSD Language Screen Saver 10 minutes Screen Saver DVD 1 English English Français 10 minutes Español • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. DVD Setup > Display DVD OSD Background Transparency 35% OSD Background Color OSD Background Color OSD Language 1 English Screen Saver 10 minutes Screen Saver OSD Language 1 OFF 5English minutes 1010 minutes minutes 15 minutes 30 minutes VCR functions 5 Changing the SETUP menu OSD Background Transparency 35% • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. Editing Screen Saver (Default : 10 minutes) Set the time to work the screen saver function on the screen. Playing discs OSD Background Transparency 35% Setup > Display Getting started OSD Background Color (Default : 1 Green) Set the OSD screen color. You can choose one among 1(Green), 2(Blue), and 3(Red). Connections OSD Background Color Setup > Display Before you start Display setting (cont’d) OSD Background Transparency (Default : 35%) Set the background transparency of OSD screen. You can choose one among 0% through 100%. Press SETUP button to exit SETUP menu. Others Español 89 Changing the SETUP menu Audio setting Choose the appropriate Audio settings for your equipment. It will only affect DVD discs during playback. Press STOP button if you are playing a disc. POWER 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 1 5 Setup Menu STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM 2 Select “SETUP” using { / B buttons, then press SEARCH MODE RETURN SKIP SKIP CM SKIP 2 3 4 ENTER button. SETUP menu will appear. Setup Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Option window will appear. Setup > Playback TV Aspect Parental Lock Disc Menu Language DVD 4:3 Letter Box All English Original OFF Audio Language Subtitle Language Digital Out Dynamic Range Control ON Fast Forward with Audio OFF Note • Dynamic Range Control function is available only on the discs which are recorded in the Dolby Digital format. 4 Select a desired item using K / L buttons, then press ENTER button. Digital Out Set the digital audio output. Setup > Playback TV Aspect DVD TV Aspect Disc Menu Language Disc Menu Language 4:3 Letter Box All English Audio Language Original Audio Language Original Subtitle Language OFF Subtitle Language Parental Lock Digital Out 90 Setup > Playback 4:3 Letter Box All English Parental Lock Digital Out Dynamic Range Control ON Dynamic Range Control Fast Forward with Audio OFF Fast Forward with Audio OFF PCM ON Dolby Digital DTSOFF • Select a setting using K / L buttons, then press ENTER button. Option window will appear. Proceed to steps A,B or C. Changing the SETUP menu A Settings for PCM (Default : Auto) OFF PCM Auto 48kHz ON Dolby Digital 96kHz DTSOFF ntrol udio Settings for Dolby Digital (Default : Stream) OFF ntrol udio C PCM ON Dolby Digital PCM Stream DTSOFF • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. ON : Outputs DTS signals. When your amplifier/decoder is compatible with DTS, set to “ON”. OFF : No DTS signal is output. When your amplifier/decoder is NOT compatible with DTS, set to “OFF”. OFF PCM ON Dolby Digital ON DTS OFF OFF Playing discs udio When playing a DVD-RW disc recorded in VR mode • If the audio source on a disc is Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main (L), sub audio (R), or a mix of both (L/R) with your amplifier/decoder. Settings for DTS (Default : OFF) Original ntrol Note TV Aspect Disc Menu Language Audio Language Subtitle Language Setup > Playback 4:3 Letter Box All English TV Aspect Original OFF Audio Language Digital Out Parental Lock Disc Menu Language Subtitle Language DVD 4:3 Letter Box All English Original OFF Digital Out Dynamic Range Control ON Dynamic Range Control ON Fast Forward with Audio OFF Fast Forward with Audio OFF ON OFF • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. • Dynamic Range Control function is effective only with analog audio connection. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language DVD Setup > Playback 4:3 Letter Box All English TV Aspect Original OFF Audio Language Digital Out Parental Lock Disc Menu Language Subtitle Language DVD 4:3 Letter Box All English Original OFF • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. VCR functions Fast Forward with Audio (Default : OFF) Set to ON to output the sound during playback in fast forward of x2. Changing the SETUP menu Parental Lock DVD Editing Dynamic Range Control (Default : ON) Set to ON to compress the range between soft and loud sounds. Setup > Playback Recording • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. PCM : Convert the Dolby Digital into PCM (2 channel). When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”. Stream : Outputs Dolby Digital signals. When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”. Original Getting started B Note When playing disc with copyright protection • If you select “Auto”, the sound will be down sampled at 48kHz. • If you select “96kHz”, no digital sound will be output. Select “Auto”, so that outputting 48kHz digital sound. Connections • Select a setting using K / L buttons, then press ENTER button. Your setting will be activated. Auto : Select “Auto” usually. 48kHz : If your amplifier/decoder is NOT compatible with 96kHz PCM, select “48kHz”. 96kHz sound will be output in 48kHz. 96kHz : If your amplifier/decoder is compatible with 96kHz PCM, select “96kHz”. 96kHz sound will be output. Original Before you start Audio setting (cont’d) Digital Out ON Dynamic Range Control Fast Forward with Audio OFF Fast Forward with Audio ON ON OFF OFF 5 Press SETUP button to exit SETUP menu. 91 Others Español Dynamic Range Control Changing the SETUP menu Settings for Parental lock level Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material. Press STOP button if you are playing a disc. POWER 4 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY 1 Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear. DVD VCR PAUSE PLAY 1 5 STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 2 3 4 Setup Menu 2 Select “SETUP” using { / B buttons, then press ENTER button. SETUP menu will appear. Setup Playback Setting 3 Select “Playback” using K / L / { / B buttons, then press ENTER button. Option window will appear. Setup > Playback TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language DVD 4:3 Letter Box All English Original OFF Digital Out 4 Dynamic Range Control ON Fast Forward with Audio OFF Select “Parental Lock” using K / L buttons, then press ENTER button. 92 Note • Parental lock function may not be available to some discs. • With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. • Record the password in case you forget it. Changing the SETUP menu Before you start Settings for Parental lock level (cont’d) Parental Lock (Default : All) Set the Parental Lock level. Setup > Playback TV Aspect Disc Menu Language Audio Language Subtitle Language 4:3 Letter Box All English TV Aspect Original OFF Audio Language DVD Parental Lock Disc Menu Language Subtitle Language Digital Out Digital Out Dynamic Range Control ON Dynamic Range Control Fast Forward with Audio OFF Fast Forward with Audio Getting started A 4:3 All Letter Box 8 All 7 English 6 Original 5 OFF 4 3 2 ON 1 OFF • Change the parental level using K / L buttons, then press ENTER button. Option window will appear. Proceed to steps A or B. Connections Parental Lock Setup > Playback DVD A password has not been set yet Setup > Playback DVD TV Aspect Yes DVD TV Aspect Parental Lock 4:3 Password All Letter Box 8- - - All Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio 7 English 6 Original 5 OFF 4 3 2 ON 1 OFF • Select “Yes” using s / B buttons, then enter a new password using Number buttons. Your setting will be activated. Recording 4:3 Letter Box Change AllPassword? Yes No 8 All 7 English Disc Menu Language 6 Original Audio Language 5 OFF Subtitle Language 4 3 Digital Out 2 ON Dynamic Range Control 1 Fast Forward with Audio OFF Setup > Playback B A password has been set already Setup > Playback TV Aspect Parental Lock Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio Setup > Playback DVD TV Aspect 4:3 Letter Box Change AllPassword? Yes No 8 Parental Lock All 7 English Disc Menu Language 6 Original Audio Language 5 OFF Subtitle Language 4 3 Digital Out 2 ON Dynamic Range Control 1 Fast Forward with Audio OFF • If you select “No”, proceed to Step 5. Yes TV Aspect Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio DVD 4:3 Password All Letter Box 8- - - All 7 English 6 Original 5 OFF 4 3 2 ON 1 OFF Changing the SETUP menu • Enter the current password using Number buttons. Setup > Playback Change the password Editing Disc Menu Language DVD 4:3 All Letter Box Password 8 All 7* * * * English 6 Original 5 OFF 4 3 2 ON 1 OFF Playing discs • If you select “No”, proceed to Step 5. • Select “Yes” using s / B buttons, then enter a new password using Number buttons. Your setting will be activated. 5 Press SETUP button to exit SETUP menu. Others Español 93 VCR functions Note • Press CLEAR/C.RESET button to erase numbers entered incorrectly. • When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using Number buttons in option window. Password will be cleared and parental levels will be set to All. VCR functions Playback VCR 3 1 Press POWER button on the remote control or the front panel of the unit. When you are playing a videotape, turn the TV on and be sure to select the input to which the unit is connected. Press: VCR During playback, press PAUSE F button. Playback will pause and sound will be muted. Insert a prerecorded videotape, then press PLAY B button to begin playback. POWER REC MODE REC SPEED 4 Press PLAY B button to resume play. AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY 2 4 DVD VCR PAUSE 3 PLAY STOP REC/OTR SETUP TIMER PROG. 5 Note 5 2 1 Press STOP C button to stop playback. 6 Press STOP/EJECT C A button on the front panel of the unit to eject the videotape. • When a videotape without record tab is inserted, the unit will start playback automatically. • Tracking will be automatically adjusted upon playback.To adjust the tracking manually, press the CHANNEL K/L buttons on the front panel of the unit or CHK/CHL buttons on the remote control. Recording and One-touch timer recording Recording First: VCR PQRS VCR 7 TUV WXYZ 8 9 SPACE Before recording, make sure: • The desired channel is selected by pressing the number buttons on the remote control or CHANNEL K/L buttons on the front panel of the unit. • There is a videotape with a record tab in the unit. • The desired recording speed is selected in SP (standard play) or SLP (super long play) mode by pressing REC MODE/REC SPEED button on the remote control. Recording speed: Tape speed Type of tape SP mode SLP mode Recording/Playback Time T60 T120 T160 1hour 2hours 2-2/3hours 3hours 6hours 8hours • Stereo or SAP is selected. Refer to page 21. • Refer to page 34 for instructions on timer recording. 94 VIDEO/TV SLOW 0 1 DISPLAY Press REC/OTR button to begin the recording. To temporarily stop recording or to resume it, press PAUSE F button. After the unit has been in Pause mode for 5 minutes, it will stop automatically to protect the videotape and the video head from damage. 2 Press STOP button when the recording is completed. Accidental erasure prevention To prevent accidental recording on a recorded videotape, remove its record tab.To record on it later, cover the hole with cellophane tape. Record tab DVD VCR PAUSE 1 PLAY STOP 1 REC/OTR SETUP REC MONITOR MENU/LIST TOP MENU TIMER PROG. 2 ENTER RETURN Note • To view one channel while recording another 1) While you are recording on the unit, press VIDEO/TV button. 2) At the cable box or satellite box, select the channel you want to view. If you have connected the unit to a cable box or satellite box, refer to “Connection to a Cable Box or Satellite Box” section on page 15. VCR functions One-touch timer recording PLAY VCR VCR During normal recording, press REC/OTR button to begin one-touch timer recording. You can select a fixed recording time by pressing the REC/OTR button repeatedly. (0:30) (1:00) (8:00) (7:30) 1 REC/OTR SETUP TIMER PROG. 1 ENTER Note When one-touch timer recording is finished, the unit will turn off automatically. To change the recording length during the one-touch timer recording, press REC/OTR repeatedly until the desired length appear. Playing discs Search Index search VCR VCR Press SEARCH MODE button so that the index search menu appears. 2 POWER Press g/h buttons to start index search. If you want to go in the forward direction, press g button. If you want to go in the reverse direction, press h button. After index search, the VCR will play the videotape automatically. CURRENT PROGRAM Beginning of tape Pro.1 Pro.2 01 Pro.3 ABC 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 7 01 02 CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE 3 PLAY STOP SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU Pro.5 CLEAR/C.RESET ZOOM 03 INDEX MARK OPEN/CLOSE DEF SPACE End of tape Pro.4 AUDIO .@/: 1 REC/OTR 02 1 SEARCH MODE RETURN SKIP SKIP CM SKIP VCR functions Enter the number of recordings you wish to skip using Number buttons with in 30 seconds. 2 REC MODE REC SPEED Changing the SETUP menu 1 3 Editing An index mark will be assigned at the beginning of each recording you make.You may skip to a specific marked point by following the steps below. First: Recording To cancel the one-touch timer recording within the specified time, press STOP C button. • The remaining recording time will appear on the display panel during an one-touch timer recording. Press DISPLAY button to see it on the TV screen. • You cannot pause a onetouch timer recording. • If OTR is finished in VCR during playback or REC mode in DVD, the VCR will be in STOP mode and the DVD keeps the current mode. • Unlike a timer recording, you can perform the following operations during a one-touch timer recording. - Turning the power off - Using REC or STOP C buttons. Getting started 1 STOP (Normal recording) Connections This feature allows you to set the recording length simply by pressing REC/OTR button on the remote control or the front panel of the unit. First: Before you start Recording and One-touch timer recording (cont’d) INDEX SEARCH 03 • Every time a videotape is recorded, an index mark is written on the videotape. 95 Others Español Note VCR functions Search (cont’d) Time search POWER VCR This feature allows you to go to a specific point on a videotape by entering the exact amount of time you wish to skip in order to reach the point. First: TIME SEARCH 2:50 2 REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 7 OPEN/CLOSE SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE VCR 1 Press SEARCH MODE button repeatedly so that the Time search menu appears. 2 Enter your desired time to skip using Number buttons with in 30 seconds. 3 3 PLAY Press g/h buttons to start time search. If you want to go in the forward direction, press g button. If you want to go in the reverse direction, press h button. After time search, the unit will play the videotape automatically. STOP REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU RETURN CLEAR/C.RESET ZOOM SEARCH MODE 1 SKIP SKIP CM SKIP Note • These functions are not available during recording. • Press STOP button to stop the search. • If the end of the videotape is reached during a Search, this unit will cancel the search and rewind the videotape. Other operations VCR VCR First: Fast forward: When the unit is in stop mode, press g to fast forward the videotape. Rewind: When the unit is in stop mode, press h to rewind the videotape. To cue or review picture during playback (Picture Search): Press g/h buttons during playback. Press it again and the unit will search in super high speed. (in the SLP mode only) To freeze the picture on TV screen during playback (Still mode): Press PAUSE F button. Each time you press the button, the picture will be forwarded by one frame. If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the CHANNEL K/L or CHK/CHL buttons. If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped. Counter Reset: Press CLEAR/C.RESET button. To playback in slow motion: Press SLOW button during playback or the still mode. If the noise bars appear on the TV screen, you can reduce it by pressing CHANNEL K/L or CHK/CHL buttons. Automatic Rewind When a videotape is played or fast forwarded to its end, the videotape will rewind to the beginning, stop, and eject itself. When you playback a videotape recorded in Hi-Fi stereo: Press AUDIO button on the remote control to select Hi-Fi or MONO for playback sound mode. • If you have connected a stereo TV to this unit, select “Hi-Fi”. • If you have connected a monaural TV to this unit, select “MONO”. 96 Note • Still/Slow/Pause mode will be automatically cancelled after 5 minutes to prevent damage to the videotape and the video head. • To return to playback from the Picture Search/Still/Slow mode, press PLAY button. Your Selection Hi-Fi MONO Type of recorded tape L-channel R-channel non Hi-Fi tapes Monaural Monaural Monaural Hi-Fi tapes recorded in Hi-Fi stereo L R L+R Hi-Fi tapes recorded main audio program Main audio program Main audio program Main audio program Hi-Fi tapes recorded second audio program Second audio Second audio Second audio program program program Others Before you start Troubleshooting Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom • Check that the AC power cord is connected securely. • (In case of power failure) Check the braker. There is no picture. • Re-connect the connecting cord securely. • The connecting cords are damaged. • Check the connection to your TV (page 14). • Check the RF output channel when you view a TV program using RF connection. • Switch the input selector on your TV (such as to "LINE1") so that the signal from this unit appears on the TV screen. TV program reception does not fill the screen. • Try to set the channels with "Auto Preset" in SETUP menu (page 19). • Select a channel of any TV program using the CH o / p buttons. • Press VIDEO/TV button if necessary. TV program pictures are distorted. • Adjust TV antenna. • Adjust the picture (see the TV's instruction manual). • Place the unit and TV farther apart. • Place the TV and any bunched antenna cables farther apart. TV channels cannot be changed. • Switch the input to TV. • Connect the antenna cable correctly (page 14). Playback picture is distorted. • Keep the equipment which may cause electrical disturbances, such as a cellular phone, away. The playback picture or TV program from the equipment connected through the unit is distorted. • If the playback picture output from a DVD player,VCR, or tuner goes through the unit before reaching your TV, the copy-protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. There is no sound. • Re-connect all connections securely. • The connecting cord is damaged. • Check the connections to the amplifier input. • The input source setting on the amplifier is incorrect. • The unit is in pause mode or in Slow-motion Play mode. • The unit is in fast forward or fast reverse mode. The channel cannot be changed from the channel you are recording. • Set the TV's input to "TV". Nothing was recorded even though you set the timer setting correctly. • There was a power failure during recording. • The internal clock of the unit stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (pages 22-24). • Disconnect the AC power cord from the AC outlet, and connect it again. • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that was set later or has priority. Timer recording is not complete or did not start from the beginning. • The timer setting overlapped with another setting that was set later or has priority (page 36). • Disc space was not enough. • Make sure indicator appears on the front display of this unit. If not, press POWER button. Getting started Recording Playing discs • When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again. 97 Others Español The unit does not operate properly. VCR functions • Batteries are weak. • There are obstacles between the remote and the unit. • The remote control is far from the unit. • There are no batteries in the remote. • Turn on the unit. • The remote control is not pointed at the remote sensor on the unit. • Press the DVD or VCR button, whichever you need. Then, try again. • If above remedies do not solve the problem, please call the Service Center for help. Changing the SETUP menu The remote control does not function. Editing Timer recording is impossible. Connections D V D • V C R Remedy The power does not turn on. Others Troubleshooting (cont’d) Symptom D V D 98 Remedy There is no picture. • The Setup Display appears. Press RETURN button to turn off the display. • Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See page 14. Picture noise appears. • The disc is dirty or flawed. • If the picture output signal from the unit passes through your VCR to get to your TV, or if you are connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience this problem even when you connect the unit directly to your TV, try connecting the unit to your TV's S-VIDEO input. There is no sound. • If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the Audio Setup settings (pages 90-91). • The disc is dirty or flawed. Sound is noisy. • The disc is dirty or flawed. The disc does not play. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play certain discs (such as a CD-ROM) (page 43). • The region code on the DVD VIDEO does not match the unit (page 43). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates (page 4). • If the disc was recorded on another recorder, the unit cannot play the disc if it was not finalized (page 41). Playback image freezes for a second. • During the playback of two layered disc, picture may freeze for a moment when the 1st layer switches to the 2nd layer. This is not a malfunction. The disc does not start playback from the beginning. • Resume play was activated (page 48). Press STOP C button twice. • You have inserted a disc whose Title menu or DVD menu automatically appears on the TV screen when it is first insert. The unit starts playing from the disc automatically. • The DVD VIDEO features an auto playback function. Some functions such as Stop, Search, or Slow-motion Play cannot be performed. • Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. The language for the sound track cannot be changed. • Multilingual tracks are not recorded on the DVD VIDEO, DVD-R or DVD-RW being played. • The DVD VIDEO prohibits the changing of the language for the sound track. • Try changing the language using the DVD VIDEO's menu. The subtitle language cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVD VIDEO. • The DVD VIDEO prohibits changing of the subtitles. • Try changing the subtitle using the DVD VIDEO's menu. The angles cannot be changed. • Multi-angles are not recorded on the DVD VIDEO being played. • You are trying to change the angles when icon does not appear on the TV screen (page 58). • The DVD VIDEO prohibits changing angles. • Try changing the angle using the DVD VIDEO's menu. Recording does not stop immediately after you press STOP C button. • It will take a few seconds for the unit to input disc data before recording can stop. Recording does not start immediately after you press REC/OTR button. • An unused DVD-R or DVD-RW was inserted. It takes a while for the unit to automatically format a DVD-RW. The disc tray does not open when you press OPEN/CLOSE A button. • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the unit is adding disc data to the disc. Others Symptom The disc tray does not open when you press OPEN/CLOSE A button. "Repairing" appears on the display. Repairing Picture noise appears. The tape does not play. Recording does not start immediately after you press REC/OTR button. The remote control does not function. The motor rotates even when playback / recording is stopped. Disc Error --- Please eject the disc. --Playback feature may not be available on this Disc. Cause Solution Insert the standardized disc which bear the marks on page 43. Insert the disc with the labeled side facing up. Region Error --- Please eject the disc. --Playback is not authorized in your region. Playback is not authorized in the region of the DVD-Video disc which you inserted in the unit. Insert the DVD-Video disc with region codes 1 or ALL. Parental Lock On --- Please eject the disc. --The current selected parental level Prohibits playback. The current selected parental level in the SETUP Menu prohibits playback. Check the "Parental Lock" setting (pages 92-93). The recording function encountered the copy prohibited program. You cannot record copy prohibited programs. Recording Error This program is not recordable in Video mode. You are trying to record the copyonce program onto the DVD-RW disc in Video mode. Set "DVD-RW Recording Format" to "VR mode" (page 29). Recording Error Can not record on this disc. You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. The disc is dirty. The disc is damaged. Insert the recordable disc, and ensure the disc status satisfies the recording requirements (pages 27-28). Clean the disc with a cleaning cloth. Replace the disc. Recording Error This program is not allowed to be recorded on this disc. You are trying to record the copyonce program onto the DVD-RW disc which is not compatible with CPRM. Insert the DVD-RW disc (ver.1.1 compatible with CPRM). Recording Error This disc is protected and not recordable. You are trying to record on to the protected disc which is set in the Disc Setting Menu. Release the disc protect setting in the Disc Setting menu (page 42). Recording Error Disc is full. (No area for new recording) You are trying to record onto the disc which has no space for recording. Insert the recordable disc with enough recording space. Changing the SETUP menu VCR functions Others Español 99 Editing Recording Error This program is not allowed to be recorded. Playing discs Unplayable disc is inserted in the unit. The disc is upside down. Recording Error message Getting started V C R Connections D V D Remedy • It may take a few seconds for the disc tray to open after you have recorded or edited a disc. • This is because the unit is adding disc data to the disc. • If there is a power failure or unplugging during recording, finalizing, formatting or editing, a Repairing process will begin automatically just after turning the unit on again. It may take several minutes up to about four hours. • Head cleaning for VCR may be necessary. Refer to “AUTO HEAD CLEANING”. • Adjust tracking control for better picture by pressing CHANNEL (o / p) buttons on this unit or CH ( o / p) buttons while you are playing a videotape. • No videotape is inserted. • Make sure the videotape has a record tab when you record to a videotape. If needed, cover the hole with cellophane tape. • Check if a videotape is in this unit. • The motor may rotate for the duration of approximately 5 minutes for efficient operation. This is not a malfunction. Before you start Troubleshooting (cont’d) Others Troubleshooting (cont’d) Error message Cause Solution Recording Error You cannot record more than 99 titles on one disc. (The maximum is 99) You are trying to record onto the disc on which the number of recording titles comes up to the maximum (99). Delete unnecessary titles (pages 61, 65, 74). Recording Error You cannot record more than 999 chapters on one disc. (The maximum is 999) You are trying to record onto the VR mode DVD-RW disc on which the number of recording chapters comes up to the maximum (999). Delete unnecessary chapter markers (pages 69, 78). This disc has no space to write the Control Information when recording or deleting contents. Delete unnecessary titles (pages 61, 65, 74). Recording Error You cannot record on this disc as Control Information is full. When editing has been repeatedly performed, the control Information area may come up to be full even the recording area has enough space. Recording Error You cannot record on the disc as Power Calibration Area is full. Recording Error This disc is already finalized. When recordings are performed repeatedly onto an unstable disc, this area may come up to be full. Insert a new disc. Every time you insert a disc for recording, the disc's working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 99 titles. You are trying to record onto the disc already finalized. Release the finalizing for this disc (page 41). * If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error description, and contact a Sharp Authorized Service Center for inspection. (See Service Information on page 103.) RF converter output You can watch the TV programs with the tuner of the unit. (Usually channel 3 or 4 of the TV is available for the RF converter setting.) Be sure to connect the unit to a TV using the Round Coaxial cable. Refer to page 14. 1 Select channel 3 on your TV. • Be sure that the unit is in DVD mode. 2 Press VIDEO/TV button on the remote control. • If noise appears, change the RF output channel of the unit to CH 4 by pressing VIDEO/TV button for 3 seconds.The RF output channel will alternate between CH3 and CH4 as follows. 100 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CH POWER VCR DVD AUDIO SLOW .@/: 1 ABC 2 3 PAUSE GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 0 DISPLAY REC MODE REC SPEED OPEN/CLOSE VIDEO/TV for more than 3 seconds 7 DEF SPACE CH VIDEO/TV SLOW 0 DISPLAY DVD VCR PAUSE PLAY 3 seconds STOP (RF ON) CH4 3 seconds (RF ON) CH3 3 seconds (RF ON) CH4 3 seconds • Changing the RF output channel is available only when the unit is in DVD mode. REC/OTR SETUP TIMER PROG. ENTER REC MONITOR MENU/LIST TOP MENU CLEAR/C.RESET ZOOM SEARCH MODE CM SKIP RETURN SKIP SKIP 2 Others VCR functions Others Español 101 Changing the SETUP menu Code 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 Editing Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu Playing discs Code 5455 5467 5565 5560 5547 5551 5557 5347 5566 5647 5669 5760 5765 5757 6469 5771 6460 5761 5767 5861 5847 5868 5860 5866 5957 5953 5965 5958 5966 5955 5964 5961 5960 6047 6051 6061 6149 6164 6247 6265 5247 6258 6266 6367 6459 6461 Recording Language Hindi Hungarian Icelandic Indonesian Interlingua Interlingue Inupiak Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean Kurdish Laothian Latin Latvian; Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Occitan Oriya Panjabi Pashto; Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Getting started Code 6159 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 5261 5256 5255 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 Connections Language (Afan) Oromo Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Before you start Language code Others Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high). Chapter Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title. Component video output Each signal of luminance(Y) and component(PB/CB, PR/CR) is independent to output so that you can experience picture color as it is. Also, due to compatibility with progressive video (480p), you can experience higher-density picture than that in interlace (480i). CPRM (Content Protection for Recordable Media) CPRM is a copy protection system with scramble system regarding the recording of “copy-once” broadcast programs (e.g. some satellite broadcasts). Digital audio An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a second for CD audio) by an analog-to-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also Sampling frequency and Analog audio. 102 Dolby Digital The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi-channel audio (up to 5.1ch). DTS (Digital Theater System) DTS is a 5.1channel surround sound system, but it is different from Dolby Digital.The formats were developed by Digital Theater System, Inc. Finalize To make DVD discs, which have been recorded on, possible to play in DVD players.With this unit, it is possible to finalize DVD-RW/ DVD-R discs. MP3 (MPEG Audio Layer 3) MP3 is a method of compressing files.You can copy MP3 files on CD-RW/R discs from the computer and play the files on this unit. PCM (Pulse Code Modulation) The most common system of encoding digital audio, found on CDs and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also Digital audio. Playlist From this list you can play contents of a disc as your desired order or in sequence. Also it is allowed to search a specific scene directly. Progressive Scan (480p) A type of display that does not split each frame into fields, and instead scans directly through all the scanlines of each frame in order. Progressive Scan provides less flickering and higher image resolution than traditional (480i) TV signals. Refer to page 14 for instructions on selective Progressive Scan mode. Regions code Regions associate discs and players with particular areas of the world.This unit will only play discs that have compatible region codes.You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Sampling frequency The rate which sound is measured by a specified interval to turn into digital audio data.The numbers of sampling in one second defines as sampling frequency.The higher the rate, the better the sound quality as possible as it is. SAP (Secondary Audio Program) Sub-audio channel which is delivered separately from main-audio channel.This audio channel is used as an alternate in bilingual broadcasting. S-Video output It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained. Title (DVD only) A collection of chapters on DVD disc. See also chapter. Track Audio CDs use tracks to divide up the content of a disc.The DVD equivalent is called a chapter. See also Chapter. Others General System Recording format Recordable discs Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format Video Recording format (DVD-RW only), Video format (DVD-RW, DVD-R) DVD-ReWritable, DVD-Recordable 13.5MHz MPEG 48kHz Dolby Digital 2-13ch 14-69ch C1-C125ch Built-in VHF converter VHF channel 3 or 4 VHF/UHF set 75Ω Input 1 (rear), 2 (front) 1 Vp-p (75Ω) RCA jack Playing discs 1 Vp-p (75Ω) RCA jack Input 1 (rear), 2 (front) 1 Vp-p (75Ω) 286 mVp-p (75Ω) 4 pin mini DIN Editing Input/Output 1 Vp-p (75Ω) 286 mVp-p (75Ω) 4 pin mini DIN 500 mVp-p (75Ω) RCA jack Service Information (For the U.S.) For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories, supplies or customer assistance, please call 1-800-BE-SHARP (1-800-237-4277) or visit SHARP’s website (http://www.sharpusa.com). 103 Others Español Note: The specifications and design of this product are subject to change without notice. VCR functions Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω) RCA jacks Input 1 (rear), 2 (front) L/R 2V rms (47kΩ) RCA jacks Output 1,2 L/R 2V rms (47kΩ) RCA jacks Changing the SETUP menu VHF/UHF antenna input/output terminal Video input Input level Jacks Video output Output level Jacks S-Video input Y (Iuminance) - Input level C (color) - Input level Jacks S-Video output Y (Iuminance) - Output level C (color) - Output level Jacks Component video output Output level Jacks Audio input During audio input Jacks Audio output During audio output Jacks Digital audio output Output level Jacks Recording Tuner Receivable channels VHF UHF CATV RF Converter Converter output Getting started Recording Connections VCR video heads Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format DVD-Video, DVD-RW/R, CD-DA, CD-RW/R, Video Cassette Tape Four heads AC120 V, 60 Hz 37 W (standby: 4.3 W) 9.5 lbs ( 4.3 kg ) 17 1/8" x 3 15/16" x 10 1/4" (435 x 100 x 261 mm) 41Fº to 104Fº (5ºC to 40ºC) 5% to 85% (no condensation) NTSC Before you start Specifications Español Precaciones Para futura referencia, anote los números de modelo y de serie (indicados en la parte posterior esta unidad) en el espacio provisto. No. de modelo: No. de serie: AVISO: PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO EXPONGA ESTE APARATO A LA HUMEDAD. PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA QUE LA PALETA ANCHA DEL ENCHUFE COINCIDA CON LA RANURA ANCHA E INTRODÚZCALA HASTA EL FONDO. PRECAUCION PELIGRO DE DESCARGA ELECTRICA NO ABRIR DECLARACIÓN DE CONFORMIDAD Este símbolo previene al usuario del voltaje aislado dentro de la unidad que puede provocar descargas eléctricas peligrosas. PRECAUCION: TPARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO QUITE LA CUBIERTA. EL USUARIO NO DEBERA DAR NINGUN TIPO DE SERVICIO A NINGUNA PARTE INTERNA. DEBERA SER REALIZADO SOLO POR PERSONAL DE SERVICIO CALIFICADO. Este símbolo advierte al usuario que existen instrucciones de operación y de mantenimiento en la literatura incluida en esta unidad. “ADVERTENCIA—Las reglas de la FCC (Comisión Federal de Comunicaciones) estipulan que cualquier modificación o cambio a este equipo no aprobado expresamente por el fabricante podrá anular la autorización del usuario para operar este equipo”. Este dispositivo cumple con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). La operación se encuentra sujeta a las dos condiciones siguientes: (1) Este dispositivo no debería producir interferencias perjudiciales, y (2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan producir una operación indeseable. INFORMACION Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivo digital de Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para asegurar una protección razonable contra interferencias perjudiciales en las instalaciones residenciales. Este equipo genera, utiliza y puede emitir energía de radiofrecuencia y, si no se instala y utiliza debidamente, es decir, conforme a las instrucciones, podrían producirse interferencias perjudiciales en las radiocomunicaciones. Sin embargo, no se garantiza que estas interferencias no se produzcan en una instalación determinada. Si este equipo ocasiona interferencias en la recepción de radio o televisión, lo cual puede comprobarse con sólo apagar y encender el equipo, intente corregir el problema mediante una o una combinación de las siguientes medidas: —Reoriente la antena receptora o cámbiela de lugar. —Aumente la separación entre el equipo y el receptor. —Enchufe el equipo a una toma de corriente situada en un circuito distinto del receptor. —Consulte a su distribuidor o a un técnico experto en radio/televisión. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá. PRECAUCION: ESTA UNIDAD HA SIDO CLASIFICADA COMO PRODUCTO CLASS 1 LASER. EL USO DE MANDOS O AJUSTES O LA REALIZACION DE PROCEDIMIENTOS DISTINTOS DE LOS INDICADOS EN LA PRESENTE IMPLICA EL RIESGO DE EXPOSICION A UNA RADIACION PELIGROSA. COMO LOS RAYOS LASER UTILIZADOS EN ESTA UNIDAD PUEDEN RESULTAR PERJUDICIALES PARA SUS OJOS, NO INTENTE DESARMAR EL GABINETE. SOLICITE EL SERVICIO UNICAMENTE A PERSONAL CUALIFICADO. 104 Español Importantes Medidas de Seguridad y Precauciones unidad de descarga de la antena, conexión a los electrodos tierra, y requerimientos de los electrodos tierra (Fig. A). FIGURA A EJEMPLO DE CONEXIÓN A TIERRA DE ANTENA DE ACUERDO CON EL CÓDIGO ELÉCTRICO NACIONAL. CABLE DE COBRE PARA LA ANTENA. ABRAZADERA DE LA ANTENA. UNIDAD PARA LA DESCARGA DE LA ANTENA (NEC SECCIÓN 810-20) EQUIPO PARA EL SERVICIO ELÉCTRICO S2898A Playing discs Editing Changing the SETUP menu VCR functions Others Español 105 Recording 15) Tormentas eléctricas - Como medida adicional de protección durante tormentas eléctricas, o cuando el producto permanezca sin uso durante períodos prolongados de tiempo, desconéctelo del tomoacorriente mural y desconecte la antena o sistema de cable. Esto evitará que el grabador de videocassettes resulte dañado por tormentas eléctricas o sobretensiones en la línea de alimentación. 16) Líneas de alimentación - Un antena exterior no debe ser instalada en la cercanía de líneas de alimentación aéreas ni de otros circuitos de potencial para iluminación eléctrica, o donde pueda caerse y hacer contacto con tales líneas o circuitos. Al instalar un sistema de antena exterior, enta mucho cuidado de no tocar tales líneas o circuitos de alimentación, ya que el contacto con ellos podría será fatal. 17) Sobrecarga - No sobrecargue los tomacorrientes murales ni los cables de extensión, ya que esto podría causar incendios o descargas eléctricas. 18) Entrada de objetos y líquidos - Nunca introduzca objetos de ningún tipo por las aberturas de sete producto, ya que pordría tocar peligrosos puntos de alta tensión o cortocircuitar partes, provocando incendios o descargas elécticas. Nunca derrame ningún tipo de líquido sobre el producto. 19) Servicio - No intente reparar el producto usted mismo; al abrir o desmontar las cobiertas usted se expondrá a alta tensión y a otros peligros. Solicite todo servicio a personal calificado. 20) Daños que requieran reparación - En los siguientes casos, desconecte el producto del tomacorriente mural y llame a un técnico de servicio calificado: a) Cuando el cable de alimentación o la clavija estén dañados, b) Si se ha derramado líquido sobre la unidad, o si algún objeto ha caído dentro del producto, c) Si el producto ha sido expuesto a la lluvia o al agua, d) Cuando a pesar de haber sebuido las instrucciones de operación, el producto no funcione normalmente. Ajuste solamente los controles mencionados en el manual de instrucciones; el ajuste incorrecto de otros controles podrá causar daños a la unidad, la que por lo general requerirá de un prolongado trabajo de reparación (por un técnico calificado) para que sus condiciones normales de operación puedan ser restablecidas, e) Si el producto se ha caído o si el gabinete se ha dañado. f) Cuando el producto muestre un cambio notorio en su rendimiento. 21) Piezas de requesto - Cuando sea necesario reemplazar piezas, asegúrese de que el técnico de servicio emplee las piezas de requesto especificadas por el fabricante, o piezas que tengan las mismas características que las piezas originales. Las sustituciones no autorizadas podrán causar incendios, descargas eléctricas y otoros problemas. 22) Revisión de seguridad - Al finalizar cualquier servicio de mantenimiento o reparación de este producto, solicítele al técnico que efectúe comprobaciones de seguridad para determinar si el producto se encuentra o no en condiciones óptimas de operación. 23) Calor - Este producto debe colocarse fuera del alcance de fuentes de calor tales como radiadores, rejillas de calefacción, estufas o cualquier otro producto destinado a producir calor, incluyendo los amplificadores. Getting started CÓDIGO DE NEC NATIONAL ELECTRIC CONDUCTORES TIERRA (NEC SECCIÓN 810-21) ABRAZADERA A TIERRA. SISTEMA DE ELECTRODOS PARA EL SUMINISTRO DE TOMA A TIERRA (NEC ARTÍCULO 250, PARTE H) Connections 1) Lea las instrucciones - Lea detenidamente todas las instrucciones de seguridad y operación antes de usar el producto. 2) Conserve las instrucciones - Conserve las instrucciones de seguridad y operación para consultas futuras. 3) Respete las advertencias - Observe estrictamente todas las advertencias impresas en el producto y las incluidas en el manual de instrucciones. 4) Siga las instrucciones - Siga todas las instrucciones de operación. 5) Limpieza - Desconecte el producto del tomacorriente mural antes de limpiarlo. No use limpiadores líquidos ni aerosol. Use un paño húmedo para la limpieza del producto. 6) Enchufes - No use enchfes no recomendados por el fabricante del producto, ya que podría ser peligroso. 7) Agua y humedad - No use este producto cerca del agua, por ejemplo, cerca de una bañera o lavamanos, cerca del fregadero de la cocina o lavandería, en un piso mojado, cerca de una piscina, etc. 8) Accesorios - No instale este producto en un carro, soporte, trípode o mesa inestables. El grabador de videocassettes podría caerse, causando serias lesiones a un niño o adulto, resultando también severamente dañado. Uselo sólo el un carro, soporte, trípode o mesa recomendados por el fabricante, o vendidos con el producto. Toda instalación del producto deberán hacerse de acuerdo a las instrucciones del fabricante, empleando los accesorios de instalación recomendados por el mismo. ADVERTENCIA SOBRE EL USO DE CARROS PORTÁTILES 9) La combinación de producto y carro debe ser movida con cuidado. Las detenciones bruscas, la fuerza excesiva y las superficies disparejas podrán hacer que el producto y el carro se vuelquen. 10) Ventilación - El gabinete del producS3125A to tiene renuras y aberturas de ventilación que garantizan el funcionamiento confiable del producto, evitando que se recaliente. Estas aberturas no deberán ser bloquear las aberturas, nunca setúe el grabador de videocassettes encima de una cama, sofá, alfombra u otra superficie similar. El grabador de videocassettes no debe ser instalado en un mueble emportado, como una repisa para libros o bastidor, a menos que se pueda garantizar una ventilación adecuada, o cuando las instrucciones del fabricante así lo especifiquen. 11) Alimentación - Este grabador de videocassettes sólo debe ser operado mediante el tipo de fuente de alimentación especificado en la etiqueta indicadora. Si no seta seturo del tipo de fuente de alimentación que tiene en su casa, consulte a su distribuidor o a la compañía de electricidad local En el caso de grabador de doseñados para funcionar a pilas o con otras fuentes de alimentación, consulte el manuel de instrucciones respectivo. 12) Conexión a tierra o polarización - Este producto está equipado con una clavija polarizada de corriente alterna (una clavija que tiene una espiga más ancha que la otra). Esta clavija solamente pordá ser insertada en el tomacorriente en una sola dirección. Esta es una medida de seguridad. Si no puediera insertar completamente la clavija en el tomacorriente, vuelva a intentarlo invirtiendo la clavija. Si aún no fuera posible insertar la clavija, tome contacto con un electricista para que repare su tomacorriente obsoleto . No modifique las características de seguridad de la clavija polarizada. 13) Protección del cable de alimentación - Los cables de alimentación deberán ser tendidos de manera tal que la probabilidad de que sean pisados o aplastados por otros objetos sea mínima. Preste especial atención a las clavijas de los cables, a los receptáculos, y al punto por donde salen del producto. 14) Conexión Tierra de una Antena Exterior: Si una antena exterior o sistema de cable es conectado al aparato de vídeo, asegúrese de que la antena o el cableado tenga conexión tierra para conseguir de esta manera una protección contra voltajes no deseados y cargas estáticas. El artículo 810 del Código de Electricidad Nacional ANSI/NFPA número 70, proporciona información acerca de la manera adecuada de conexiones a tierra de la estructura del mástil y la estructura soporte, sobre la unidad del cable del interior de cobre de antena, tamaño de los conductores tierra, ubicación de la Before you start Precaciones (cont.) Español Fácil grabación de DVD Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD. Nota: Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco Paso 2:Coloque un disco en blanco Mando a distancia Puede elegir entre distintos tipos de discos DVD grabables. Elija un tipo de disco DVD grabable de acuerdo con sus necesidades de reproducción/grabación.Vea los "tipos de discos DVD" en la parte inferior de esta página para más detalles sobre las diferencias entre los distintos medios compatibles. Este grabador de DVD puede grabar los siguientes tipos de discos. REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO 4 5 6 POWER 1 OPEN/CLOSE 2 Para abrir CH Para encender 4.7 REC MODE REC SPEED AUDIO .@/: 1 ABC DEF 2 3 GHI JKL MNO POWER * Esta unidad no puede grabar en los discos siguientes. • DVD-RW Ver 1.2 / 2-4x compatible con CPRM • DVD-R General Ver 2.0 / 8x Por ejemplo, cuando desea grabar repetidamente en el mismo disco o cuando desea editar el disco después de grabar, seleccione el disco de tipo regrabable DVD-RW. Cuando desea guardar grabaciones sin alterarlos, un DVD no regrabable DVD-R puede ser más conveniente. OPEN/CLOSE 3 Para cerrar CH Cargando Esta operación puede demorar en reconocerse. Tipos de disco DVD Formato del disco . Coloque el disco en el grabador. Haga el formato del disco del menú SETUP, existen los formatos de video (modo de Video) o de grabación de video (modo VR) según el tipo de disco colocado. Esto es necesario para preparar el disco para grabación.Vea los detalles en las páginas 29-30. Al formatear, todo el contenido de ese disco se borarán. • La unidad empieza a formatear automáticamente cuando se inserta un disco no usado. : Más adecuado : Puede utilizar : Algunas funciones son limitadas Desea DVD-RW VR : No puede utilizar DVD-RW Video DVD-R DVD-RW VR DVD-RW Video DVD-R ¿Regrabable? Sí Sí No Puede crear capítulos a intervalos fijos (auto.) Sí Sí Sí Puede crear capítulos donde desee (manual) Sí No No Puede grabar imágenes de tamaño 16:9 Sí Sí Sí Puede grabar un programa de Copia-una-vez Sí No No Grabar programas de TV Volver a utilizar borrando partes no deseadas Editar las grabaciones Editar/grabar de equipos conectados Copiar discos para distribución *1 Reproducir en otro equipo de DVD *1 Detalles Grabación Edición *1 106 Puede hacer funciones de edición básica Sí Sí Sí Puede hacer funciones de edición avanzadas (edición de lista a reproducir) Sí No No El DVD-RW (modo VR) sólo puede reproducirse en equipos de DV compatibles con VR. Nota: Para más detalles sobre las funciones anteriores y las limitaciones implícitas, lea las explicaciones en este manual. Español Paso 3: Seleccione la velocidad de grabación Para seleccionar el modo DVD Paso 5: Grabe en discos DVD PQRS 7 POWER REC MODE REC SPEED AUDIO OPEN/CLOSE POWER GHI AUDIO 2 5 6 PQRS TUV WXYZ 7 8 9 SPACE 2 3 0 JKL MNO 5 6 TUV WXYZ 8 9 SPACE CH VCR DISPLAY VCR VIDEO/TV SLOW DVD VCR PAUSE DEF CH PLAY VIDEO/TV STOP REC/OTR SLOW DVD SETUP TIMER PROG. ENTER REC MONITOR PAUSE MENU/LIST TOP MENU VIDEO/TV RETURN SLOW 0 2 4 DEF 4 DISPLAY 3 MNO ABC PQRS 7 OPEN/CLOSE 2 JKL 9 Getting started .@/: 1 REC MODE REC SPEED ABC GHI WXYZ 8 0 DISPLAY .@/: 1 TUV SPACE Connections 1 Paso 4: Seleccione el canal deseado DVD PAUSE 1 Para seleccionar la velocidad de grabación CH 1 Recording I SP 2:01 Rem. Sugerencia 1: Reproduzca el contenido grabado Inicio de grab. Parada/inicio Título 1 Parada grab. Título 2 ¿Qué son títulos y capítulos? El contenido de un disco DVD se divide generalmente en títulos. Los títulos pueden dividirse a su vez en capítulos. Paso 6: Pare la grabación Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2 SPACE Playing discs Puede seleccionar el título que desea reproducir de un menú indicado y empiece a reproducir inmediatamente. El contenido grabado se puede acceder fácilmente con un simple procedimiento de elegir un título en un capítulo en la pantalla del menú. Before you start Fácil grabación de DVD (cont.) SLOW 0 Sugerencia 2: Edite el disco grabado Puede editar lo siguiente de la lista de títulos. VCR DVD PAUSE Editing La edición de discos es fácil. Esta unidad ofrece convenientes funciones de edición que sólo son posibles con discos DVD-R/RW. DISPLAY PLAY STOP REC/OTR SETUP REC MONITOR TIMER PROG. ENTER Changing the SETUP menu • Poniendo nombres en títulos • Seleccionando imágenes para índices (modo VR) • Seleccionando/borrando marcadores de capítulos • Borrado de partes de títulos o escenas (modo VR) Title Delete: Esto borra permanentemente una escena completa del disco. Scene Delete: Esto permite que el usuario edite dentro de una escena específica (anuncios comerciales, por ejemplo). Original y Playlist (modo VR) 58% Escrit de datos Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco. VCR functions ¿Qué significa "Original" o "Playlist"? A lo largo de este manual encontrará Original y Playlist que se refieren a las grabaciones reales y la versión editada. • La grabación Original se refiere a la grabación real en el disco. • El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la versión Original. Finalización de un disco Esta operación puede demorar en completarse. 107 Others Español • Esto permitirá que un disco que se grabe en nuestra unidad pueda ser reproducido en un reproductor DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor. • Después de finalizar un disco, si la grabación se hizo en el modo de vídeo, usted no podrá editar ninguna información que se encuentre en ese disco. • Si ha grabado en el modo VR en un disco DVD-RW, la edición podrá realizarse incluso después de la finalización. Español Reproducción con videograbadora VCR 3 1 Presione el botón POWER en el mando a distancia o el panel frontal de la unidad. Cuando reproduzca una cinta, conecte el TV y asegúrese de seleccionar la entrada donde se conecta la unidad. Presione: VCR 2 Coloque una cinta pregrabada y presione el botón PLAY B para empezar la reproducción. Durante la reproducción, presione el botón PAUSE F. Se hará una pausa de reproducción y se silenciará el sonido. POWER REC MODE REC SPEED AUDIO .@/: 1 ABC 2 3 GHI JKL MNO 4 5 6 TUV WXYZ 8 9 PQRS 7 OPEN/CLOSE DEF SPACE CH VIDEO/TV SLOW 0 4 Presione el botón PLAY B para continuar la reproducción. DISPLAY 2 4 DVD VCR PAUSE 3 PLAY STOP REC/OTR REC MONITOR SETUP TIMER PROG. 5 ENTER 5 Presione el botón STOP C para detener la reproducción. 6 Presione el botón STOP/EJECT C A en el panel frontal de la unidad para expulsar la cinta. 108 1 Nota • Cuando se coloca una cinta sin la lengüeta de grabación, la unidad empezará a reproducir automáticamente. • El seguimiento se ajustará automáticamente para la reproducción. Para ajustar manualmente el seguimiento, presione los botones CHANNEL K/L en el panel frontal de la unidad o los botones CHK/CHL en el mando a distancia. Español Before you start Grabación y grabación con temporizador de un toque (VCR) Grabación VCR VCR 6 WXYZ 8 9 SPACE CH VIDEO/TV SLOW 0 1 DISPLAY Presione el botón REC/OTR para empezar la grabación. Para detener temporalmente la grabación o continuarla, presione el botón PAUSE F. Después de que la unidad haya estado en el modo de pausa durante 5 minutos, se detendrá automáticamente para proteger al cinta y el cabezal de video contra cambios. 2 Prevención contra borrado accidental Lengüeta de grabación 1 PLAY STOP 1 REC/OTR SETUP TIMER PROG. 2 ENTER REC MONITOR Nota • Para ver un canal mientras graba en otro 1) Mientras está grabando en la unidad, presione el botón VIDEO/TV. 2) En la caja de cable o caja de satélite, seleccione el canal que desea ver. Si se conectó la unidad a una caja de cable o caja de satélite, consulte la sección de "Connection to a cable box or satellite box" en la página 15. Grabación con temporizador de un toque (OTR) PLAY VCR STOP VCR 1 REC/OTR REC MONITOR SETUP TIMER PROG. 1 ENTER (7:30) Cuando termina la grabación con temporizador de un toque, la unidad se desconectará automáticamente. Para cancelar la grabación con temporizador de un toque dentro del tiempo especificado, presione el botón STOP C. Nota 109 Others Español • El tiempo de grabación remanente aparecerá en la pantalla durante una grabación con temporizador de un toque. Presione el botón DISPLAY para que aparezca en la pantalla de TV. • No puede hacer una pausa en una grabación con temporizador de un toque. • Si se termina el OTR en la videograbadora durante el modo de reproducción o REC en DVD, la videograbadora estará en el modo STOP y la DVD se mantiene en el modo actual. • A diferencia de una grabación con temporizador, durante una grabación con temporizador de un toque usted puede realizar las operaciones siguientes. - Desconectar la alimentación - Utilizar los botones REC o STOP C. VCR functions Durante la grabación normal, presione el botón REC/OTR para empezar la grabación con temporizador de un toque. Puede seleccionar un tiempo de grabación determinado presionando repetidamente el botón REC/OTR. (8:00) (1:00) Changing the SETUP menu 1 (Canal a grabar) (0:30) Editing Esta función permite seleccionar la longitud de la grabación simplemente presionando el botón REC/OTR en el mando a distancia o en el panel frontal de la unidad. Primero: Playing discs Para evitar una grabación por accidente en un casete grabado, rompa la lengüeta de grabación. Para volver a grabar posteriormente, cubra el orificio con cinta adhesiva. PAUSE Recording Presione el botón STOP cuando se complete la grabación. DVD VCR Getting started • Se selecciona Estéreo o SAP. MNO 5 TUV Connections Tiempo de grabación/reproducción T60 T120 T160 2 horas 2-2/3 horas 1 hora 3 horas 6 horas 8 horas JKL 4 PQRS 7 Antes de grabar, asegúrese de que: • Se seleccionó el canal deseado presionando los botones numéricos en el mando a distancia o botones CHANNEL K/L en el panel frontal de la unidad. • Hay una cinta con la lengüeta para grabación intacta en la unidad. • Se seleccionó la velocidad de grabación deseada en SP (reproducción estándar) o SLP (reproducción de super larga duración) presionando el botón REC MODE/REC SPEED en el mando a distancia. Velocidad de grabación: Velocidad de la cinta Tipo de cinta Modo SP Modo SLP GHI Primero: Note 110 Note 111 CONSUMER LIMITED WARRANTY (Valid for warranty service in the U.S. only) SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Model Specific Section Your Product Model Number & Description: DV-RW340U, DV-RW350U VCR/DVD Recorder Combination (Be sure to have this information available when you need service for your Product.) Warranty Period for this Product: One (1) year parts and ninety (90) days labor from date of purchase. Additional Item(s) Excluded from warranty Coverage (if any): Non-rechargeable batteries. Where to Obtain Service: Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for instructions on how to obtain service on your VCR/DVD Recorder combination. What to do to Obtain Service: Ship your product, prepaid, as per the instruction given by the Sharp representative at the toll free number (1-800-BE-SHARP). BE sure to have your proof of purchase available. Be sure to ship the product securely packaged and insured against shipping damage. TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, GO TO OUR WEBSITE AT www.sharpusa.com OR CALL 1-800-BE-SHARP. SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Osaka, Japan 9HS1VMN20224 E9434UD/E9435UD★★★★★ 1VMN20224 Printed in China