Download Siemens SL42 User guide

Transcript
19.3.02
SL42-SL45-ger.fm
U35 /SL45i- English, A31008-H4860-A1-3-7619
Setup
Security
~
The phone and SIM card are
protected against misuse by several
security codes and should be
treated with the same care as a
cheque guarantee card.
PIN 1 Protects your SIM card (personal identification number).
PIN 2 This is needed to set the
charge detail display and to
access additional functions
on special SIM cards.
PUK
Key code. Used to unlock
SIM cards after the wrong
PIN has been entered.
Phone Protects your phone. Must
code be entered at the first security setting (4-8 digits).
Keep these confidential numbers in a
safe place where you can access them
again if required.
Menu ! Setup !
Security !
then select a function:
65
Babysitter
(Phonecode)
Calls can only be made to one phone
number that is dialled by holding
down the left soft key. Enter phone
number and name or select from the
Addressbook.
To end:
Hold down and enter
phone code.
#
Only I
~
(PIN 2)
The dialling options are restricted to
specific phone numbers. If you only
enter area codes, the relevant
phone numbers can be added to
these manually before dialling.
For further information see p. 23.
Only last 10
(Phonecode)
Calls are limited to the call list
of dialled numbers. This call list can
be filled with phone numbers
specifically for this purpose:
Delete (see also p. 53) the call list
and create “new entries“ by dialling
phone numbers and cancelling
before the connection is
established.