Download Bosch 4412 User guide

Transcript
Security System User’s Guide
Command Center Keys
Your LED Command Center has 19 keys to perform the various functions
as described below:
Key
Function
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
The numeric keys are used for entering
passcodes and issuing commands.
Cmd
The [Cmd] key is used in conjunction with
the numeric keys to enter commands. Also
displays system status.
All On
The [All On] key allows you to turn your
system All On (see page 14,"Turning the
System All On").
Part On
The [Part On] key allows you to turn your
system Part On (see page 15, "Turning the
System Part On").
No Delay
The [No Delay] key allows you to turn your
system All On or Part On with no entry or
exit delay (see page 18, "Turning the System
On with No Delay").
Bypass
The [Bypass] key allows you to bypass one
or more points (see page 21, "Bypass
Points").
*
Press the [*] key to advance to the next
display (when available).
A
An emergency function (Fire, Panic or
Emergency Alarms) may be assigned to
these keys by your installing company. To
activate the special function, press the key
two times consecutively within two seconds.
Your security company will label each key to
its assigned function.
B
C
46840C
LED Command Center User’s Guide
Page 8
Copyright © 2002 Radionics