Download Wharfedale Pro R200 Instruction manual
Transcript
R200 Instruction Manual .1. R200 R Series Mixers Thank you for purchasing an R Series Mixer from Wharfedale Professional. Please read these instructions carefully to ensure problem free operation and user satisfaction. The R Series of mixers from Wharfedale Professional are designed to offer a superior quality audio performance in an easy to use, great value package. The quality of the R Series is such it can be used in a variety of professional applications such as studio, sound reinforcement, field recording and film/video production. Features R200: * 4 balanced/unbalanced mono line inputs * 4 low noise, high headroom XLR mic inputs * 2 pairs of balanced/unbalanced stereo line input with +4/-10 input gain/sensitivity selector * 48V phantom power * 3 band EQ in each input channel (12kHz, 2.5kHz, 80Hz) * 75Hz, 18dB/octave low cut filter on channels 1-4 * EFX to AUX switch , * Peak LED s on mono channel * One aux send and one effect send * Separate main mix, control room and headphone outputs * 2 track inputs assignable to main mix, control room/headphone outputs * Highly accurate 4 segment bargraph meters * High quality 60mm fader on master output ,, * 19 Rack Mounting kit included Getting Started Power Supply The R Series mixer is supplied with an external power supply unit. Only use the power supply provided with your mixer. Connect the R Series mixer to the power supply unit and THEN connect the power supply unit to the Mains. During long periods of operation the mixer may become warm. Therefore it is important that the unit is placed where the air is able to flow freely around it. Packing Every care has been taken to ensure that your mixer reaches you in perfect condition and working order. The exterior and internal packaging has been designed to protect the unit in transit, but should you notice any damage to the unit, please notify the place of purchase immediately. Warranty The R Series mixers warranty covers any defects in the manufacture of the product for a period of 12 months from the date of purchase. The Warranty is nontransferable and applies to the original purchaser only. Should you have any Warranty issues, please contact your place of purchase who will advise on a returns procedure. R Series Mixers R200 .2. Mono Input Channels: 1. Low Impedance (or Low Z) Mic Inputs The R200 features four low noise, high headroom Low Z mic inputs for use with balanced or low impedance microphones or low level external equipment with XLR connectors. 2. Line Inputs The R200 features ,, four balanced/unbalanced high impedance mono line inputs for use with high level signals with 1/4 phone plug connectors. 3. Low Cut Filter: The low cut filter can be activated by pressing this button. The slope of this filter is 18dB. 3dB at 75Hz and should be used when it is necessary to eliminate or reduce background rumble, breathing noises and popping. 4. Gain Control: The input level on the mic channels is controlled by using the Gain Control maximising the signal to noise ratio. The Gain control should be used in conjunction with the Peak LED (10) which will illuminate if the input gain is too high. 5. EQ Section: Each mono input channel features a three band EQ section. The Hi EQ control has an upper shelf limit of 12kHz, the Mid EQ 2.5kHz and ,,the Low EQ 80Hz. Each control has a range of -15db to +15dB cut and boost, with a central point of 0 for OFF. The EQ control section should be used in conjunction with the Low Cut Filter (3) to add extra warmth or extra punch to the mix where necessary. ,, AUX Section 6. The AUX is set to Pre Fader (independent of the channel fader) and post EQ. 7. The EFX control is set to Post Fader which allows you adjust channel EFX send level to the external effect unit. Volume and Panning 8. The Pan control adjusts the amount of channel signal sent to the left versus the right inputs. On the mono channels the controls act as true Pan pots. 9. The level to the main mix bus is controlled by the channel volume control with a range to +15dB. 10. Mic channel level is determined by the GAIN control (4). In addition, to main metering, a channel PEAK LED illuminates when a channel is going into overload. These LED s take their cue from post EQ. Stereo input Channels: ,, 11. The R200 stereo channel features two unbalanced line level inputs with 1/4 jacks for left and right signals. 12. Left mono input: When the left input is connected only, then the channel operates in mono. 13. -10/+4. Switch: This button lets you choose between the two standard operating levels -10dBv and +4dBu. Aux send and stereo EFX return ,, 14. The AUX Send and EFX Send are provided on unbalanced 1/4 jacks. 15. The stereo EFX return, If you connect a jack only to the Left socket it will operate in mono. 16. EFX to AUX button: Press the EFX to AUX button can route the EFX return signal to the AUX bus. 17. EFX send level control 18. EFX return level control .3. R Series Mixers R200 Metering , 19. The level of the main mix is, displayed on this LED section. The 0 level LED should be illuminated most of , the time - if the 6 or CLIP LEDs are illuminated then you should reduce the main mix or channel volume. , , , 20. This LED is illuminated when Power is ON. 21. When this LED is illuminated it indicates that the +48 V DC phantom power is present. The Phantom Power is switched on and off by a sliding switch. 2 Track In/Out 22. The two track input section has RCA phono jack inputs to enable easy connection to DAT tape devices and other audio equipment. , This is used primarily for listening to mix playback from a tape for example. Pressing the 2TK to MIX button (23) routes this signal to the main mix. Similarly, pressing the button , 2TK to Phones Ctrl Room (24) will route the signal to the studio monitors. , , 23. 2TK to Mix button. 24. 2TK to Phones Ctrl Room Button. 25. The Level is determined by the 2TK Level control. Monitoring: 26. Headphones output. The signal from this output follows the signal from the control room outputs. 27. Control room outputs. 28. Volume control level for headphones and main monitors. 29. The master fader controls the level of the master mix. ,, 30. Balanced XLR 1/4 (TRS) output. Power: 31. AC cable conector. 32. ON/OFF switch. Features of the R200 mixer: 1. Low Z inputs 15.Effect stereo return 29. Main mix level control 2. Balanced line inputs 16. Effect aux switch botton 30. Balanced main output 3. Lo Cut filter 17. Effect send level control 31. AC cable contector 4. Gain control 18. Effect return level control 32. ON/OFF switch 5. EQ section 19. Main mix LED meter 6. AUX (Pre Fader) control 20. Power on LED 7. EFX (Post Fader) control 21. Phanton power ON/OFF and indicator 8. Pan control 22. Two track input and output 9. Channel level control 23. Two track to main mix switch 10. Peak LED 24. Tow track to control room and phones switch 11. Stereo input channel 25. Tow track level control 12. Mono input on stereo channel 26. Headphones output 13. +4/-10 input gain switch 27. Control room output 14. EFX to AUX send 28. Control room & Headphones level control R Series Mixers 1 MIC .4. R200 2 MIC 3 MIC 4 MIC 15 14 EFX RETURN EFX SEND LINE IN 2-TRACK IN/OUT L AUX SEND R LINE IN 22 CTRL / OUT L/MONO 1 LINE IN 27 TAPE IN HEADPHONES TAPE OUT L L R R 26 R LINE IN MONO MONO L L 2 R-200 4 MIC/LINE +2 STEREO MIXER BAL OR UNBAL 3 75Hz BAL OR UNBAL 75Hz LO CUT GAIN 4 BAL OR UNBAL -10 +4 LO CUT GAIN -10 +4 MIC:-10 -60dB LINE:+10 -40dBu 75Hz -10 -10 LO CUT +4 +4 75Hz LO CUT GAIN GAIN -10 +4 MIC:-10 -60dB LINE:+10 -40dBu -10 +4 MIC:-10 -60dB LINE:+10 -40dBu 12 BAL OR UNBAL R MIC:-10 -60dB LINE:+10 -40dBu LINE IN 5/6 R LINE IN 7/8 25 0 0 EQ 0 EQ 0 EQ 0 EQ 21 13 11 0 EQ EQ HI HI HI HI HI HI 12kHz 12kHz 12kHz 12kHz 12kHz 12kHz 2TK LEVEL OFF ON PHANTOM -15 +15 -15 0 +15 -15 0 +15 -15 0 +15 -15 0 +15 MAX 0 MID MID MID MID MID MID 2.5k Hz 2.5k Hz 2.5k Hz 2.5k Hz 2.5k Hz 2.5k Hz +15 -15 0 -15 -15 0 5 -15 +15 +15 -15 0 -15 +15 -15 0 +15 -15 0 +15 LO LO LO LO LO 80Hz 80Hz 80Hz 80Hz 80Hz 80Hz -15 +15 -15 +15 -15 +15 -15 +15 -15 AUX AUX AUX AUX AUX PRE PRE PRE PRE PRE PRE 2TK TO PHONES CTRL ROOM EFX SEND +15 +15 EFX +15 EFX +15 EFX +15 EFX EFX +15 +15 +15 19 0 -20 24 10 17 5 EFX 7 +15 CLIP 20 23 +15 EFX RETURN +15 POWER +15 AUX +15 +48V 6 0 LO +15 6 +15 0 2TK TO MIX +15 0 5 +15 18 29 10 8 PAN PAN PEAK LEFT RIGHT PAN PEAK LEFT 1 RIGHT PEAK LEFT RIGHT 3 2 PAN PAN EFX TO AUX PAN 15 PEAK LEFT RIGHT 4 LEFT RIGHT LEFT 5/6 RIGHT 7/8 9 28 PHONES CTRL ROOM +15 +15 +15 +15 +15 +15 LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL 10 31 32 30 16 30 MAX MAIN MIX .5. BLOCK DIAGRAM R200 R200 R Series Mixers R Series Mixers R200 .6. SPECIFICATIONS - R200 Main Mix Noise ,, 20Hz-20kHz bandwidth, 1/4 Main out,channels 1-4 Trim@ unity gain, channel EQs flat,all channels assigned to Main Mix,channels 1 and 3 pan left, 2 and 4 pan right Main Mix fader down, channel faders down: -100dBu Main Mix fader unity, channel faders down: -90dBu Main Mix fader @ unity, channel faders @ unity: -90dBu Total Harmonic Distortion (THD) 1KHZ @ +14dBu,20Hz-20kHz Mic in to Main out: 0.0025% Attenuation(Crosstalk) 1kHz relative to 0dBu,20Hz-20kHz ,, bandwidth,line in,1/4 +Main out,Trim @ unity 1 Main fader down: -85dBu Channel VR minimum : -70dBu Frequency Response Mic input to any output 20Hz20kHz: +0dB/-1dB 10Hz-60kHz: +3dB/-3dB Maximum levels Mic in : +4dBu Tape in: +13dBu All other inputs: +25dBu Main Mix XLR out: +22dBu All other outputs: +22dBu Impedances Mic in: 3 kilohms Channel input: 20 kilohms Stereo input: 20 kilohms All other inputs: 10 kilohms or greater Tape out: 10 kilohms All other outputs:100 ohms EQ High shelving: +/-15dB@ 12kHz Mid peaking: +/-15dB@ 2.5kHz Low shelving: +/-15dB@ 80Hz Power Consumption 25 watts EUROPE:230VAC-50Hz JAPAN:100VAC-60Hz UK: 240VAC-50Hz USA :120VAC-60Hz SIZE mm (HxWxL) 80.3 x 307 x379 Weight 4.4 kg Wharfedale Professional IAG House, Sovereign Court, Ermine Business Park, Huntingdon, PE29 6XU Www.wharfedalepro.com 911.395 .1. R200 Instruction Manual R Series Mixers R200 .2. .3. Mono Input Channels: R200 R Series Mixers R Series Mixers SPECIFICATIONS - R200 - R Series Mixers The R200 features four low noise, high headroom Low Z mic inputs for use with balanced or low impedance microphones or low level external equipment with XLR connectors. 2. Line Inputs 15 1 MIC 19. The level of the main mix is displayed , on this LED section. The 0 level LED should be illuminated the time , most of, - if the 6 or CLIP LEDs are illuminated then you should reduce the main mix or channel volume. 2 MIC 3 MIC EFX RETURN 4 MIC 8 LINE IN LINE IN 27 EFX SEND 22 CTRL / OUT L/MONO 2-TRACK IN/OUT L AUX SEND TAPE IN HEADPHONES TAPE OUT L L R R 26 R LINE IN MONO 2 MONO L L R-200 4 MIC/LINE +2 STEREO MIXER BAL OR UNBAL 3 4 BAL OR UNBAL 75Hz BAL OR UNBAL 75Hz LO CUT GAIN +4 LO CUT GAIN -10 +4 MIC:-10 -60dB LINE:+10 -40dBu -10 +4 75Hz LO CUT GAIN -10 +4 MIC:-10 -60dB LINE:+10 -40dBu -10 +4 -10 +4 MIC:-10 -60dB LINE:+10 -40dBu 12 BAL OR UNBAL 75Hz LO CUT GAIN -10 R MIC:-10 -60dB LINE:+10 -40dBu LINE IN 5/6 R LINE IN 7/8 25 0 EQ 0 EQ HI 0 EQ HI 12kHz 0 EQ HI 12kHz 0 EQ HI 12kHz EQ HI 12kHz 21 13 11 0 HI 12kHz 2TK LEVEL 12kHz OFF ON PHANTOM -15 +15 -15 0 +15 -15 0 5 +15 +15 +15 -15 0 MID 0 -15 -15 0 +15 -15 0 +15 MAX MID 2.5k Hz -15 +15 0 MID 2.5k Hz -15 +15 0 MID 2.5k Hz -15 MID 2.5k Hz -15 0 +15 0 +15 LO LO LO LO LO 80Hz 80Hz 80Hz 80Hz 80Hz +15 -15 +15 -15 +15 -15 +15 -15 AUX AUX AUX AUX AUX PRE PRE PRE PRE PRE PRE 2TK TO PHONES CTRL ROOM EFX SEND +15 +15 EFX +15 EFX +15 EFX +15 EFX +15 +15 +15 24 10 17 5 EFX EFX RETURN +15 20 23 19 0 -20 +15 EFX 7 +15 POWER CLIP +15 AUX +15 +48V 6 0 LO -15 2TK TO MIX 2.5k Hz -15 80Hz +15 6 +15 0 MID 2.5k Hz -15 +15 0 5 +15 18 29 10 8 PAN RIGHT PAN PAN PEAK LEFT 1 15.Effect stereo 29. return Main mix 2. 16. Effect aux level Balanced switch botton line inputs 17. Effect send The R200 features four balanced/unbalanced high impedance mono line inputs for LINE IN PEAK Features of the R200 mixer: 14 R LEFT 1. Low Z inputs .4. R200 1 1. Low Impedance (or Low Z) Mic Inputs .6. R200 Main Mix Mix,channels 1 Noise and 3 pan 20Hz-20kHz left, 2 and 4 ,, bandwidth, 1/4 pan right Main out,channels Total 1-4 Trim@ Harmonic unity gain, Distortion channel EQs (THD) flat,all channels 1KHZ @ assigned to +14dBu,20HzMain 20kHz Mic in to Metering , R Series Mixers , R200 , .5. R Series Mixers Thank you for purchasing an R Series Mixer from Wharfedale Professional. Please read these instructions carefully to ensure problem free operation and user satisfaction. The R Series of mixers from Wharfedale Professional are designed to offer a superior quality audio performance in an easy to use, great value package. The quality of the R Series is such it can be used in a variety of professional applications such as studio, sound reinforcement, field recording and film/video production. Wharfedale BLOCK DIAGRAM R200 R200 RIGHT RIGHT 3 2 PAN PEAK LEFT PAN EFX TO AUX PAN 15 PEAK LEFT RIGHT 4 LEFT RIGHT LEFT 5/6 RIGHT 7/8 30 9 28 PHONES CTRL ROOM +15 +15 +15 +15 +15 +15 LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL 10 31 32 30 16 MAX MAIN MIX