Emerson CKD9908 Owner`s manual Download

Transcript
Stereo Radio, CD-R/RW Player
with Dual Alarm Clock
OWNER'S MANUAL
CKD9901
Visit our web site at www.emersonradio.com
CKD9901_F112905.p65
27
29/11/2005, 11:30
CAUT I ON
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
C AU T I O N
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to
alert the user to the presence
of uninsulated ‘dangerous voltage’
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK), NO USER
SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(ser vi ci ng) instr ucti ons in
the liter ature accompanying the appl iance.
The Caution Marking maybe located at the bottom enclosure of the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
3.) Clean only with dry cloth.
4.) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
11.) This appliance shall not be exposed to dripping or splashing water and no object filled with liquids
such as vases shall be placed on the apparatus.
12.) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13.) Do not overload wall outlet. Use only power source as indicated.
14.) Use replacement parts as specified by the manufacturer.
15.) The product may be mounted to a wall only if recommended by the manufacturer.
16.) Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks.
1
CKD9901_F112905.p65
1
29/11/2005, 11:29
Befor We Begin
Thank you for purchasing this Emerson audio product. The Emerson brand
is your assurance of quality, performance and value.
Our engineers have included many useful and convenient features in this
product. Please be sure to read this Owner's Manual completely to make
sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and
standards of workmanship. It was tested by Emerson inspectors and found
to be in perfect working order before it left our factory. However, there is
always the chance that some problem may occur because of rough handling
during shipment to the retail store or to the final consumer.
If, after reading this Manual, you experience any problems with the operation
of this product, please refer to the instructions for obtaining service at the
end of this Manual. Emerson and Emerson retailers are committed to your
satisfaction.
Once again, thanks for purchasing this Emerson audio product.
2
CKD9901_F112905.p65
2
29/11/2005, 11:29
IMPORTANT NOTES
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
APPAREIL Á LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM
This product contains a low power Laser Device.
• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much
heat, places lacking ventilation or dusty
areas, places subject to constant
vibration and/or humid or moist areas.
• Operate controls and switches as
described in the manual.
• Before turning on the power, make
certain that the power cord is properly
installed.
• When moving the set, be sure to first
disconnect the power cord and remove
cords connected to other equipment.
FCC Information
This equipment has been tested and found to comply with the limits for a class B
digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
3
CKD9901_F112905.p65
3
29/11/2005, 11:29
PREPARATION FOR USE
Unpacking And Set Up
• Remove the unit from the carton, and remove all packing materials from the
unit.
• Save the carton and packing materials in case the unit ever needs to be returned
for service. Using the original carton and packing materials is the only way to
safely repack the unit for shipment.
• Remove any descriptive labels or stickers from the top or front of the unit. Do
not remove any labels from the back or bottom of the cabinet.
• Remove any small strips of tape that may have been used to prevent the CD
door from opening in transit.
• Press the CD OPEN button to open the CD door and remove the dummy CD
protection card from the CD compartment. Discard it and close the CD door.
• Unwind the FM wire antenna on the back cabinet and extend it to its full length.
• Unwind the AC power cord and extend it to its full length.
• Place the unit on a stable, level surface such as a table, desk, shelf, etc within
easy reach of an AC outlet, out of direct sunlight, and away from sources of
excessive heat, dust, moisture or humidity.
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
4
CKD9901_F112905.p65
4
29/11/2005, 11:29
Power Source
This system is designed to operate on 120VAC 60Hz house current only. Connecting
this system to any other power source may cause damage to the system and such
damage is not covered by your warranty.
Note: The system has polarized AC plug with one wide blade and one narrow
blade. The plug will only fit into matching polarized AC outlets.
This is a safety feature to reduce the possibility of electric shock. If the plug will not
fit in your AC outlet, you probably have an outdated non-polarized outlet. You should
have your outdated outlet changed by a qualified, licensed electrician. Do not file
the wide blade on the plug, or use an adapter to make the plug fit into your outlet.
This defeats the safety feature and could expose you to electric shock.
AC Outlet
AC Plug
5
CKD9901_F112905.p65
5
29/11/2005, 11:29
Battery Back Up System
This unit uses a single 9-Volt battery (not included) to maintain the time and alarm
settings in the event that it is accidentally unplugged, or you experience a temporary
power failure. We recommend that you install a well-known brand of Alkaline battery
for longest life and best performance. To keep the battery back up system operational
you should install a new battery every 6 to 9 months. Some people find it convenient
to replace the back up batteries in their alarm clocks, clock radios, and smoke
detectors too, at the beginning and end of Daylight Saving Time.
To install the back up battery, turn the unit upside down, and
1.) Press on the small tab to remove the battery door.
2.) Connect the battery to the battery terminal, push the battery back into the
compartment and replace the battery door.
9
1
VO
LT
2
If the power is interrupted the clock display will go off but the battery will maintain
the clock and alarm time settings. When power is restored the time display will be
correct and your alarm setting will also be maintained.
If you notice that the time display is completely wrong you probably experienced a
power failure with a weak or exhausted battery in the compartment. Reset the
clock and replace the battery as soon as possible.
6
CKD9901_F112905.p65
6
29/11/2005, 11:29
LOCATION OF CONTROLS AND INDICATORS
5
6
4
7
3
8
34
9
2
10
11
12
1
13
21
20
19
18
25
17
26
27
16
15
14
28 29
30
24
23
31
22
22
32
33
7
CKD9901_F112905.p65
7
29/11/2005, 11:29
1.)
PLAY•PAUSE Button.
2.) VOLUME Control.
3.) FUNCTION (RADIO/CD/BUZZER) Selector Switch.
4.) CD compartment.
5.) AC Power Cord.
6.) FM W ire Antenna.
7.) BAND (FM ST./AM) Selector Switch.
8.) CD Door CLOSE Position.
9.) TUNING Control.
CD OPEN Button.
10.)
11.) SLEEP Button.
12.) POWER On/Off Button.
13.) ALARM 2 Setting Button.
14.) TIME Setting Button.
15.) ALARM 1 Setting Button.
16.) SNOOZE Button.
17.) P•MODE Button.
18.)
CD Skip Forward Search/HOUR Button.
19.)
CD Skip Reverse Search/MINUTE Button.
20.) PROGRAM Button.
21.)
STOP Button.
22.) Speakers.
23.) ALM (Alarm) 1 ‘On’ Indicator.
24.) PM Indicator.
25.) PROGRAM Indicator.
26.) REPEAT Indicator.
27.) RANDOM Indicator.
28.) POWER ‘On’ Indicator.
29.) FM ST. Indicator.
30.) LED Display.
31.) ALM (Alarm) 2 ‘On’ Indicator.
32.) Tuning Dial scale and pointer.
33.) Back Up Battery Compartment (At bottom cabinet)
34.) AUX IN Jack.
8
CKD9901_F112905.p65
8
29/11/2005, 11:29
OPERATING INSTRUCTIONS
Setting The Time Of Day
• Connect the power cord to your AC outlet. Make sure to use an outlet that is
always ‘live’. Do not use an outlet that is controlled by a wall switch.
• When the unit is plugged in for the first time
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
the display will show flashing “12:00” (AM).
ALM 1
ALM 2
HOUR button to set the hour. Be
1.) While the display is flashing, press the
sure to observe the PM indicator to set the hour correctly. If the PM indicator is
‘On’the hour displayed is PM.
2.) Press
MINUTE button to set the minute correctly..
PROGRAM
3.) Press the TIME button once, the time is set.
The display remains “On”.
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 2
IMPORTANT NOTES !!
If you press and hold the TIME button any time, the clock will change to
European 24-Hour format, and vice versa.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PROGRAM
PM
REPEAT
RANDOM
POWER
ALM 1
ALM 1
ALM 2
ALM 2
9
CKD9901_F112905.p65
FM ST.
PM
9
29/11/2005, 11:29
Setting The Wake Up Times
The unit has two separate wake up alarms that can be set and used independently.
1.) Press the ALARM 1 or ALARM 2 button once. The display will change from
the respective time of day to wake up time and begin flashing.
The ALM 1 or ALM 2 indicator comes “On”.
2.) Press the
HOUR button to set the wake up hour. Set correctly for AM or
PM.
3.) Press the
MINUTE button to set the minute correctly, press the respective
ALARM button once. The Alarm time is set.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
The display returns to correct time.
ALM 1
ALM 2
Note: Press the ALARM 1 or ALARM 2 button once to turn the respective
Alarm time “Off”. The ALM 1 or ALM 2 indicator will go “Off”.
10
CKD9901_F112905.p65
10
29/11/2005, 11:29
Listening To The Radio
PROGRAM
1.) Press the POWER button to turn the unit
“On”. The POWER indicator comes on.
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 2
2.) Set the FUNCTION selector (on left side panel) to RADIO position.
Set the BAND selector (on right side panel) to FM ST. or AM.
3.) Turn the TUNING control to find the desired
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
station. If you tune to a FM Stereo station
ALM 1
ALM 2
the FM ST. indicator light comes on.
4.) Adjust the VOLUME control to the desired level.
5.) When you are finished listening press the POWER button to turn the unit “Off”.
The POWER indicator goes off.
Antenna Information
AM
The AM ferrite bar antenna is inside
the cabinet. If AM reception is
unsatisfactory try turning the entire
unit slightly until you find the
direction that provides the best reception for the desired station.
FM
Make sure the FM lead wire antenna is
extended to it’s full length. You may have
to vary the direction of the wire antenna to
find the position that provides the best
reception.
11
CKD9901_F112905.p65
11
29/11/2005, 11:29
Playing Compact Discs
Note: Although this CD player can read CD-R and CD-RW discs, in addition to
normal CDs, however the playability of CD-R/RW discs may be affected by
the type of software that was used to create the discs, as well as the quality
and condition of the blank media you are using. 100% playability cannot be
guaranteed. This is not an indication of a problem with the player.
Normal Playback
1.) Press the POWER button to switch the unit ‘On’. The POWER indicator comes
“On”.
2.) Set the FUNCTION selector to the CD position.
3.) Press the
CD OPEN button to open the CD door..
4.) Place your disc on the center spindle with the printed label side facing up.
Press down near the center of the disc to make sure it is firmly ‘seated’on the
spindle, press CLOSE to close the CD door.
5.) Two dashes “– –” flash while the player reads the table of contents of the disc.
The display will show the total number of
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
tracks for a few seconds and then return to
ALM 1
ALM 2
the correct time.
Note: If the disc is inserted incorrectly, or if the disc is badly scratched
and cannot be read by the player, “no” will
appear on the display for a few seconds,
and then the display returns to the correct
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 2
time.
6.) Press the
PLAY•PAUSE button to begin playback.
The display will briefly show “01” (Track 1)
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
and playback on track 1 begins.
ALM 1
ALM 2
After a few seconds the display returns to the correct time.
12
CKD9901_F112905.p65
12
29/11/2005, 11:29
PLAY•PAUSE button.
7.) To Pause briefly during playback press the
The track number flashes briefly and the
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
sound stops, but the disc continues to spin.
ALM 1
Press
ALM 2
PLAY•PAUSE button again to cancel pause and resume playback.
8.) To skip forward or backward to other tracks repeatedly press the
or
buttons until the desired track number appears in the display. Playback will
begin on the selected track.
9.) To stop playback at any time press the
STOP button. After the last track has
s
played the disc stops automatically. Press the
CD OPEN button to open
the CD door and remove your disc.
To Start Playback From A Specific Track
Load your disc and wait until the display shows the total number of tracks.
Press the
or
buttons to select the desired track.
While the track number is still flashing press the
PLAY•PAUSE button.
Playback will begin on the selected track and continue until the end of the disc.
High Speed Music Search
You can search rapidly forward or backward within a track to locate a specific
musical passage.
Depress and hold the
or
buttons to begin high speed search. The display
will show the current track and the player moves rapidly forward or backward.
When you reach the desired passage release the
or
button and normal
playback resumes.
Note: The volume level is automatically reduced during high speed music
search.
13
CKD9901_F112905.p65
13
29/11/2005, 11:29
Repeat Playback
You can program the player to repeat a single track or the entire disc continuously.
One Track Repeat
1.) Load your disc and wait until the total track number is displayed.
2.) Press the P•MODE button once.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
The REPEAT indicator flashes.
3.) Press
or
ALM 1
button to select the track to be repeated.
When the track number is still flashing, press
the
ALM 2
PLAY•PAUSE button. The selected
track will be repeated continuously.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 2
All Tracks Repeat
1.) Load your disc and wait until the total track number is displayed.
PROGRAM
2.) Press the P•MODE button twice.
The REPEAT indicator remains ‘On’.
3.) Press the
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 2
PLAY•PAUSE button. All tracks will be repeated continuously..
To cancel repeat playback press the P•MODE button until the REPEAT indicator
goes “Off”, or press the
STOP button.
14
CKD9901_F112905.p65
14
29/11/2005, 11:29
Random Playback
To listen to the tracks on a disc in random order:
1.) Load your disc and wait until the total track number is displayed.
2.) Press the P•MODE button three times.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
The RANDOM indicator comes “On”.
3.) Press the
ALM 1
ALM 2
PLAY•PAUSE button. The player will select a track at random
and playback begins on that track. The selected track number appears in the
display for a few seconds.
After each track has played once the player stops automatically.
To cancel random playback at any time, press the P•MODE button until RANDOM
indicator goes “Off”.
15
CKD9901_F112905.p65
15
29/11/2005, 11:29
Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you
to program any disc to play just the tracks you want to hear in the exact order that
you want to hear them. You may program a track or tracks to play more than once
if desired.
Note: Programming can only be done while the player is in the Stop mode. If
STOP button to stop playback before performing
a disc is playing press the
the programming steps below.
1.) Turn the unit “On”, select the CD function and load the desired disc in the
player. Wait until the player reads the disc and the display shows the total track
number.
2.) Press the PROGRAM button. The PROGRAM indicator flashes and the display
briefly shows “P 01” then “00” flashes indicating that you can select the first
track to be programmed.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PROGRAM
PM
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 1
ALM 2
3.) Press the
or
ALM 2
buttons to select the
first track. The desired track number flashes
on the display.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 2
4.) Press the PROGRAM button again. The selected track is entered in program
memory number 01 and the display advances to “P 02” then “00” flashes
indicating that you can select the next track to be programmed.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PROGRAM
PM
REPEAT
RANDOM
POWER
FM ST.
PM
ALM 1
ALM 1
ALM 2
ALM 2
or
buttons to select the next track to be programmed, and
nd
5.) Press the
press the PROGRAM button to enter the track in the memory.
6.) Repeat step 5 to program up to 20 tracks in the memory.
16
CKD9901_F112905.p65
16
29/11/2005, 11:29
PLAY•PAUSE
7.) After you have programmed all the desired tracks press the
button to begin programmed playback. The PROGRAM indicator stops flashing
and remains ‘On’. Playback will begin on the first track you programmed and
continue until all programmed tracks have been played.
PROGRAM
REPEAT
RANDOM
POWER
PROGRAM
FM ST.
REPEAT
RANDOM
POWER
FM ST.
PM
PM
ALM 1
ALM 1
ALM 2
ALM 2
Notes:
• After all programmed tracks have played the player stops but the program
remains in the memory.
Press the PROGRAM button and then the
PLAY•PAUSE button to begin
programmed playback again.
• To clear the program from the memory after the disc stops, press the
PROGRAM button and then press the STOP button.
Opening the CD door, pressing the POWER button to shut the unit ‘Off’, or by
switching to the RADIO function also clears the program.
Program Repeat Playback
You may use the Program and Repeat features together to repeat a programmed
sequence of tracks.
Simply enter the desired tracks in the program memory as described on page 16,
then press the P•MODE button twice to select ‘All Tracks Repeat’.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
The PROGRAM and REPEAT indicators will
both come “On”.
Press
ALM 1
ALM 2
PLAY•PAUSE to begin Program Repeat playback.
17
CKD9901_F112905.p65
17
29/11/2005, 11:30
Auxiliary Input Jack (Connection Cable Not Included)
This unit includes an AUX IN input jack to allow you to connect external devices,
such as an iPod® or portable MP3 player, and listen to the music stored on your
external device through the speakers of this radio.
Connect the headphone jack of your external device to the AUX IN input jack
located on the left side of this unit. The connection cable is not included.
ME
NU
IMPORTANT:
When you connect a cable to the AUX IN input jack of this unit the FUNCTION
selector automatically switches from Radio or CD to Auxiliary Input. You must
disconnect the cable from the AUX IN input jack in order to listen to the Radio
or CD again.
After connecting your external device to the AUX IN input jack, slowly adjust
both the volume controls on this unit and your external device to find the desired
setting. Please note that if the VOLUME control on this radio is set to a low
level while the VOLUME control on your external device is set too high, the
sound will be distorted.
Remember to disconnect the connection cable after use in order to be able to
listen to the Radio or CD player again.
iPod® is a trademark of Apple Computer Inc., registered in the U.S. and other
countries.
18
CKD9901_F112905.p65
18
29/11/2005, 11:30
Alarm Operation
This unit gives you the option of waking to an electronic Buzzer alarm, the AM/FM
Radio, or the CD player.
Notes:
A.) Whichever alarm mode you select – BUZZER, CD or RADIO – will apply
to both alarms. Refer to “Setting The Wake Up Times” on page 10. Adjust
the wake up time(s) if necessary.
B.) If you have any external device connected to the AUX IN jack, the alarm
will automatically default to the Buzzer, even though the FUNCTION
selector may be set to the RADIO or CD position.
Wake To Buzzer
1.) Setthe FUNCTION selector to BUZZER position.
2.) Press the ALARM 1 and/or ALARM 2 buttons. The respective Alarm time
flashes for few seconds, then returns to correct time.
The ALM 1, ALM 2 or both indicators come
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
“On”.
ALM 1
ALM 2
PROGRAM
3.) At the selected wake up time the electronic
REPEAT
RANDOM
POWER
FM ST.
PM
Buzzer turns “On”. The ALM indicator
ALM 1
ALM 2
flashes.
It will continue for 60 minutes and then turn “Off” and reset itself for the following
day.
4.) To stop the buzzer immediately, press the POWER button. The Buzzer stops
and the alarm resets itself for the following day.
5.) To cancel the alarm completely press the ALARM 1 and/or ALARM 2 buttons
once to turn “Off”. The respective ALM indicator disappears.
19
CKD9901_F112905.p65
19
29/11/2005, 11:30
Wake To Radio
1.) Set the FUNCTION selector to RADIO position.
Set the BAND selector to FM ST. or AM, and tune to the desired station.
2.) Adjust the VOLUME level then press POWER button to turn “Off”
3.) Press the ALARM 1 and/or ALARM 2 buttons. The respective Alarm time
flashes for few seconds, then returns to correct time. The ALM 1, ALM 2 or
both indicators come “On”.
4.) At the selected wake up time the Radio turns “On”.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
The ALM indicator flashes.
ALM 1
ALM 2
It will continue for 60 minutes and then turn “Off” and reset itself for the following
day.
5.) To stop the Radio immediately, press the POWER button. The Radio stops
and resets itself for the following day.
6.) To cancel the alarm completely press the ALARM 1 and/or ALARM 2 buttons
once to turn “Off”. The respective ALM indicator disappears.
20
CKD9901_F112905.p65
20
29/11/2005, 11:30
Wake To CD
1.) Set the FUNCTION selector to CD position and playback the disc as usual.
2.) Adjust the VOLUME level then press POWER button to turn “Off”
3.) Press the ALARM 1 and/or ALARM 2 buttons. The respective Alarm time
flashes for few seconds, then returns to correct time. The ALM 1, ALM 2 or
both indicators come “On”.
4.) At the selected wake up time the CD turns “On” and starts playback Track 01.
PROGRAM
REPEAT
RANDOM
POWER
FM ST.
PM
The ALM indicator flashes.
ALM 1
ALM 2
It will continue for 60 minutes or until the end of the disc and then turn “Off” and
reset itself for the following day.
5.) To stop the CD immediately, press the POWER button. The CD stops and
resets itself for the following day.
6.) To cancel the alarm completely press the ALARM 1 and/or ALARM 2 buttons
once to turn to ‘Off’. The respective ALM indicator disappears.
Snooze/Repeat Alarm
After the alarm turns on in the morning you can press the SNOOZE button for a
few extra minutes sleep. The alarm will stop for approximately 6 minutes and then
come on again. Snooze operation can be repeated several times if desired, but
after one hour the alarm will not turn ‘On’again.
21
CKD9901_F112905.p65
21
29/11/2005, 11:30
Sleep To Music Timer
You can use the sleep timer to fall asleep to the Radio or CD player for 90, 60, 30
or 15 minutes and have the unit shut off automatically.
• Press the POWER button or simply the SLEEP button to turn the power “On”.
Operate the Radio or CD player as usual. Adjust the volume to the desired
level. The level you select for “Sleep To Music” is the same level you will hear
when the alarm turns “On” in the morning.
• Press the SLEEP button to select the desired amount of sleep time as follows:
Display
Meaning
1st Press
“90”
90 Minutes Till Shut Off.
2nd Press
“60”
60 Minutes Till Shut Off.
3rd Press
“30”
30 Minutes Till Shut Off.
4th Press
“15”
15 Minutes Till Shut Off.
5th Press
“Correct Time”
Sleep Off.
• When the display shows the desired amount of time, stop pressing the SLEEP
button. After 5 seconds the display changes back to the correct time. The
Radio or CD player will continue until the sleep timer counts down to “00” and
then shut off automatically.
• To stop the Radio or CD player before the sleep timer counts down to “00”,
press the POWER button to turn the unit “Off”.
Notes:
• If you set the sleep time for either 90 or 60 minutes and you are playing a
CD that is only 48 minutes long, for example, playback will stop at the end
of the disc.
• Be sure the FUNCTION selector is set to the RADIO or CD position before
you press the SLEEP button.
No sound will be heard if the FUNCTION selector is set to the BUZZER
position.
22
CKD9901_F112905.p65
22
29/11/2005, 11:30
CARE AND MAINTENANCE
Compact Disc Care
• To remove a disc from its storage case, press down on the center of the case
and lift the disc out, holding it carefully by the edges.
• Fingerprints and dust should be carefully wiped off the disc’s recorded surface
with a soft cloth.Unlike conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently wiping with a soft cloth should
remove most particles. Wipe in a straight line from the inside to the outside of
the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
• Never write on or affix labels to the surface of compact discs.
Care Of The Cabinet
• If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any
wax or polish sprays on the cabinet.
• If the front panel becomes dirty or smudged with fingerprints it may be cleaned
with a soft cloth slightly dampened with a mild soap and water solution. Never
use abrasive cloths or polishes as these will mar the finish of your unit.
Caution
Never allow any water or other liquids to get inside the unit while cleaning.
23
CKD9901_F112905.p65
23
29/11/2005, 11:30
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service.
Symptom
Radio
Possible Cause
Solution
Noise or sound
distorted on AM or FM
Station not tuned properly for
AM or FM.
Retune the AM or FM
broadcast station.
broadcasts.
FM: FM Wire antenna is not
extended.
Extend FM Wire antenna.
AM: The bar antenna is not
positioned correctly.
Reposition the unit until
best reception is obtained.
FM ST. indicator
does not light.
You have tuned to a mono
station.
Select another FM stereo
station.
AM or FM, no sound.
FUNCTION switch is not set to Set FUNCTION switch to
AM or FM ST.
AM or FM ST. as desired.
Volume at minimum.
Increase Volume.
Compact Disc Player
CD Player will not play.
CD skips while playing.
FUNCTION switch is not set to Set FUNCTION switch to
CD.
CD.
CD is not installed or installed
incorrectly.
Insert CD with Iabel side
up.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
R
SERVICE
TO FIND THE LOCATION AND PHONE
NUMBER OF YOUR NEAREST SERVICE
CENTER PERMITTED TO PERFORM
WARRANTY...
CALL TOLL FREE: 1-800-695-0098
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE
PLEASE CALL:
1-800-898-9020
FOR CUSTOMER SERVICE, PLEASE WRITE TO:
Emerson Radio Corp.,
Consumer Affairs Dept.,
5101 Statesman Drive,
Irving, TX 75063.
24
CKD9901_F112905.p65
24
29/11/2005, 11:30
LIMITED WARRANTY
Emerson Radio Corp. warrants manufacturing defects in original material, including
original parts and workmanship, under normal use and conditions, for a period of
ninety (90) days from the date of original purchase in the U.S. With your dated
proof of purchase, we will provide repair service at no charge for labor and parts
at an authorized Depot Repair Facility, or replace the product in our discretion.
For repair or replacement, pack your unit in a padded box, enclose your check or
money order payable to Emerson Radio Corp. in the amount of $9.00 (not required
by California residents) to cover shipping and handling costs, and enclose a copy
of your proof of purchase. Send your unit to:
Emerson Radio Corp.,
5101 Statesman Drive,
Irving, TX 75063.
This warranty does not cover damage from negligence, misuse, abuse, accident,
failure to follow operating instructions, commercial use, rental, repairs by an
unauthorized facility, or products purchased, used, serviced or damaged outside
of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
AU898M
The serial number of your unit is located on a label on the bottom cabinet.
Please take a moment to locate the Serial Number of your unit and write it in the
space provided below. You may be asked to provide this number when calling to
request customer service.
Model No: CKD9901
Serial Number:
25
CKD9901_F112905.p65
25
29/11/2005, 11:30
EMERSON
Part No. 16-2741F
Printed in China
511-01
CKD9901_F112905.p65
26
29/11/2005, 11:30