Download Austin Hughes Electronics UltraView AP-8 User manual

dedicated LCD display solutions
User Manual
19” Widescreen LCD
AP-W19
Aluminum front bezel
NAP-W19
Front NEMA4 / IP65
OP-W19
Universal Mounting Open Frame
Designed and manufactured by Austin Hughes
UM-UV-621-W19-Q215V1
www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-UV-621-W19-Q215V1
www.austin-hughes.com
Contents
< Part. 1 > AP-W19 / NAP-W19
1.1
1.2
1.3
Package Content
Structure Diagram & Dimension
Mounting Hardware & Installation
P.1
P.2 - 3
P.4 - 5
< Part. 2 > OP-W19
2.1
2.2
2.3
Package Content
Structure Diagram & Dimension
Mounting Hardware & Installation
P.6
P.7 - 8
P.9
< Part. 3 > Specifications / OSD
3.1
3.2
Product Specifications
On-screen Display Operation ( OSD )
P.10 - 11
P.12
< Part. 4 > Options
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
Option Table
3G / HD / SD-SDI Broadcast-grade input
MCS Multi-display control solution
AV2.2D Upgrade : DVI-D, S-Video + BNC & Audio
AV2.2H Upgrade : HDMI, S-Video + BNC & Audio
AV3.0 Upgrade : HDMI, DVI-D, S-Video + BNC & Audio
Resistive / Capacitive ( single point touch )
DC Power : 12V / 24V / 48V / 110 ~ 125V
MIL-type or lockable connector
Quad display for CCTV
TV ( Analog )
UM-UV-621-W19-Q215V1
P.13
P.14
P.15
P.16 - 17
P.18
P.19 - 20
P.21
P.22
P.23
P.24 - 25
www.austin-hughes.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
UM-UV-621-W19-Q215V1
www.austin-hughes.com
< Part 1 >
< 1.1 > Package Content - AP / NAP-W19
AP-W19 / NAP-W19
19" Widescreen LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Mounting hardware X 1 pack
- Mounting bracket x 4 pcs
- M4* 6mm screw x 8 pcs
- M4* 50mm screw x 8 pcs
Basic I/O
Power
DVI-D
VGA
DVI-D
VGA
AV2.2D upgrade I/O
Power BNC S-Video
Audio
out - in - in
Video PC
AV2.2H upgrade I/O
Power BNC S-Video
Audio
out - in - in
Video PC
VGA
HDMI
AV3.0 upgrade I/O with advanced features
Power BNC S-Video
Audio
out - in - in
Video PC
DVI-D
VGA
HDMI
- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio
- On-chip Faroudja® DCDi Cinema processing
UM-UV-621-W19-Q215V1
P.1
www.austin-hughes.com
< 1.2 > Structure Diagram - AP / NAP-W19
19" Widescreen LCD Display
1
2
3
Front view
4
AP-W19
NAP-W19
5
7
Rear view
1
Rear case
2
LCD panel
3
Protective 3mm glass
4
6mm aluminum front bazel
5
Audio speaker ( for HDMI, Audio or TV option )
6
LCD membrane
7
Remote sensor
6
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
AP-W19
NAP-W19
508.5 x 65.6 x 338.1 mm
20 x 2.6 x 13.3 inch
662 x 115 x 533 mm
26.1 x 4.5 x 21 inch
7 kg
15.4 lbs
10 kg
22 lbs
UM-UV-621-W19-Q215V1
P.2
www.austin-hughes.com
< 1.2 > Dimension - AP / NAP-W19
Front View
Side View
AP-W19
NAP-W19
Rear View
UNIT : mm
1mm = 0.03937 inch
Bottom View
UM-UV-621-W19-Q215V1
P.3
www.austin-hughes.com
< 1.3 > Panel Mount Installation - AP / NAP-W19
1
2
Mounting
M4*6mm screw
bracket
19” Widescreen LCD Display
3
M4*50mm screw
x 8 pcs
x 4 pcs
x 8 pcs
Hardware set part no. UV-BK#2
Steps
■
■
UM-UV-621-W19-Q215V1
Install 4 mounting brackets with 8 x M4*6mm screws
Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface.
P.4
www.austin-hughes.com
< 1.3 > VESA mount Installation - AP / NAP-W19
M4 screw
VESA mount ( 100*100mm )
■
UM-UV-621-W19-Q215V1
Hardware and M4*4 pcs for VESA mount are not provided
P.5
www.austin-hughes.com
< Part 2 >
< 2.1 > Package Content - OP-W19
19” Widescreen LCD Display
OP-W19
19" Widescreen LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
Basic I/O
Power
DVI-D
VGA
DVI-D
VGA
AV2.2D upgrade I/O
Power BNC S-Video
Audio
out - in - in
Video PC
AV2.2H upgrade I/O
Power BNC S-Video
Audio
out - in - in
Video PC
VGA
HDMI
AV3.0 upgrade I/O with advanced features
Power BNC S-Video
Audio
out - in - in
Video PC
DVI-D
VGA
HDMI
- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio
- On-chip Faroudja® DCDi Cinema processing
UM-UV-621-W19-Q215V1
P.6
www.austin-hughes.com
< 2.2 > Structure Diagram - OP-W19
1
Front view
2
OP-W19
3
6
Rear view
1
Rear case
2
LCD panel
3
Audio speaker ( for HDMI, Audio or TV option )
4
4
Universal open frame mounting
5
5
LCD membrane
6
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
OP-W19
505.5 x 59.6 x 335.1 mm
19.9 x 2.3 x 13.2 inch
662 x 115 x 533 mm
26.1 x 4.5 x 21 inch
5.5 kg
12.1 lbs
8.4 kg
18.5 lbs
UM-UV-621-W19-Q215V1
P.7
www.austin-hughes.com
< 2.2 > Dimension - OP-W19
19” Widescreen LCD Display
Front View
Side View
OP-W19
UNIT : mm
Rear View
1mm = 0.03937 inch
Bottom View
UM-UV-621-W19-Q215V1
P.8
www.austin-hughes.com
< 2.3 > Installation - OP-W19
( I ) Universal mount
( II ) VESA mount ( 100*100mm )
M4 screw
Hardware and M4*4 pcs for VESA mounting are not provided
UM-UV-621-W19-Q215V1
P.9
www.austin-hughes.com
< Part 3 >
< 3.1 > Product Specifications
Mechanical
Design
19” Widescreen LCD Display
AP / NAP-W19
OP-W19
Front Panel
Black, RAL 9005
-
Rear Casing
Black, RAL 9005
Black, RAL 9005
VESA Mounting
100 x 100mm
100 x 100mm
Other Mounting
Panel mount
Universal mount
3mm protective glass
-
Protection
LCD
Panel
Manufacturer
Panel Size ( diagonal )
19-inch Widescreen TFT color LCD
Display pixel ( dots x lines )
1440 x 900
Brightness ( typ. )
300
Contrast Ratio ( typ. )
1000:1
Color
16.7 M
Viewing Angle ( L/R/U/D )
80/80/80/80
Response Time ( ms )
5
Dot pitch ( mm )
0.2835
Display Area ( mm )
Surface treatment
Haze 25%, Hard-coating
Surface hardness
3H
Backlight Type
CCFL
MTBF ( hrs )
50,000
Video
Connectivity
Analog
Power
Power Supply
Power Consumption
Regulatory
Environmental
Conditions
408.24H x 255.15V
VGA
Analog 0.7Vp-p
DVI
DVI-D, TMDS single link
Range
Auto-sensing 100 to 240VAC,
50/60Hz
Screen display ON
25W or less
Power saving mode
4W or less
Power button OFF
1W or less
Safety
FCC & CE certified
Environmental
RoHS2 & REACH compliant
Operating
Temperature
0 to 55°C degree
Humidity
20~90%, non-condensing
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Storage
UM-UV-621-W19-Q215V1
P.10
www.austin-hughes.com
Physical
Specification
AP / NAP-W19
OP-W19
508.5 x 65.6 x 338.1 mm
505.5 x 59.6 x 335.1 mm
20 x 2.6 x 13.3 inch
19.9 x 2.3 x 13.2 inch
662 x 115 x 533 mm
662 x 115 x 533 mm
26.1 x 4.5 x 21 inch
26.1 x 4.5 x 21 inch
Net Weight
7 kgs / 15.4 lbs
5.5 kgs / 12.1 lbs
Gross Weight
10 kgs / 22 lbs
8.4 kgs / 18.5 lbs
Product ( W x D x H )
Packing ( W x D x H )
Applicable
Format
VGA Input
PC Signal
1440 x 900 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
UM-UV-621-W19-Q215V1
P.11
www.austin-hughes.com
< 3.2 > On-screen Display Operation ( OSD )
19” Widescreen LCD Display
Power light
Green = On
Orange = Power saving
Membrane Switch
Function
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
UM-UV-621-W19-Q215V1
P.12
www.austin-hughes.com
< Part 4 > Options
< 4.1 > Option Table
Options
AP / NAP
OP
SDI ***
HDMI * or DVI-D
S-Video * + Composite ( BNC )
Audio
Touchscreen
MCS multi-display control
DC Power
MIL-type / lockable connector
Quad display
TV ( Analog ) *
***
About SDI
( 1 ) The AD board will be upgraded to version 3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC, audio inputs and RC-1 remote controller.
*
About HDMI and DVI-D
( 1 ) For AV2.2 upgrade, either HDMI or DVI-D is provided.
( 2 ) If the user needs HDMI and DVI-D, AV3.0 upgrade can be applied.
*
Remote Controller
( 1 ) AV2.2 upgrade comes with RC-1 remote controller.
( 2 ) TV option comes with RC-2 remote controller.
UM-UV-621-W19-Q215V1
P.13
www.austin-hughes.com
< 4.2 > Options : 3G / HD / SD-SDI input
19” Widescreen LCD Display
Austin Hughes’ SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
Designed for use with UltraView Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, Austin Hughes provides a
SDI input module without using additional space or power and it
comes standard with a 2-year warranty.
SDI
Power BNC S-Video
Audio
DVI-D
out - in - in
Video PC
***
VGA
HDMI
out
-
in
For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC, audio inputs and RC-1 remote controller ( please refer to P.17 )
INPUT
Standard Compliance
Compatible Video Format
Compatible Audio Format
Max. Transmission Distance
75 ohm coaxial cable
UM-UV-621-W19-Q215V1
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equalized & relocked
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
3G-SDI
1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI
1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI
480i
@60Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
P.14
www.austin-hughes.com
< 4.3 > Options : MCS
More control is always good. Especially when it is necessary and
easy. Austin Hughes provides MCS solution to control the OSD of
various UltraView LCD display up to 64 units.
MCS
( Multi-display Control )
The RS-232C is used for the communication between the PC and
the first display via a 15 feet serial cable while the CAN bus is
used for the various LCD displays cascade together via CAT 5/6
cable, and daisy chain up to 1,000 meters.
Designed for use with UltraView LCD displays, Austin Hughes
provides a MCS input module without using additional space or
power and it comes standard with a 2-year warranty.
MCS
Power BNC S-Video
Audio
out - in - in
Video PC
DVI-D
VGA
HDMI
set out
in
Link
*** Please download the protocol of MCS control at :
http://www.austin-hughes.com/support/usermanual/ultraview/UM-UV-MCS.pdf
Set switch
For the 1st and last display,
push the set switch upward
RS-232C
For other daisy chain displays,
push the set switch downward
15 feet serial cable
( over 15 feet, extender required )
LINK
OUT
IN
Cat5 / 6 cable
max. 300 meters
OUT
IN
Cat5 / 6 cable
max. 300 meters
OUT
IN
OUT
Cat5 / 6 cable
max. 300 meters
RJ-45 jack
Daisy chain up to 1,000
meters and 64 displays
UM-UV-621-W19-Q215V1
P.15
up to 64 displays
www.austin-hughes.com
19” Widescreen LCD Display
< 4.4 > Options :
AV2.2D Upgrade Options
- DVI-D ( DVI-D TMDS single link )
( S-Video + Composite, BNC )
- AV
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
Power BNC S-Video
Audio
DVI-D
VGA
out - in - in
Video PC
AV2.2H Upgrade Options
- HDMI ( HDMI 1.1, CEA-861-D )
( S-Video + Composite, BNC )
- AV
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
Power BNC S-Video
Audio
out - in - in
Video PC
VGA
HDMI
***
AV2.2 upgrade option comes with RC-1 remote controller x 1.
UM-UV-621-W19-Q215V1
P.16
www.austin-hughes.com
5
1
2
3
6
7
4
8
9
1
POWER
Switches on or off the TV
2
MUTE
Turn on or off the speaker
3
INPUT
Switch to signal input mode
4
0- 9
Select channels. For channel numbers 10 and above,
enter the second digit within two seconds.
5
V+/-
Increase or decrease the speaker volume
6
CH + / -
Increase or decrease the channel number
7
MENU
Display the menu on the screen or go to the previous menu
8
AUTO
For auto searching
9
-/-
For setting one or two input digit
UM-UV-621-W19-Q215V1
P.17
www.austin-hughes.com
19” Widescreen LCD Display
< 4.5 > AV3.0 Upgrade Options :
- HMDI ( HDMI 1.1, CEA-861-D )
- DVI-D ( DVI-D TMDS single link )
( S-Video + Composite, BNC )
- AV
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
Power BNC S-Video
Audio
out - in - in
Video PC
UM-UV-621-W19-Q215V1
DVI-D
VGA
HDMI
P.18
www.austin-hughes.com
< 4.6 > Options : Touchscreen & driver
W19" USB Touchscreen Specification
Model
e-Resistive
TRB
e-Capacitive
TCB
Technology
5-Wire Resistive
Capacitive
Touch Point
Single
Single
Input Type
Finger or Stylus
Finger
Resolution
2048 x 2048
2048 x 2048
-
-
Response Speed
15 ms
20 ms
Activation Force
≤ 50 g
≤ 50 g
3H
9H
Light Transmission
80% ± 3%
92% ± 2%
Haze
8% ± 3%
7%
Durability
10 million touches
300 million touches
Top Layer
ITO Film
Touch Point Accuracy
Surface Hardness
Glass
ITO Glass
Bottom Layer
Thickness
3.2 ± 0.2 mm
2.8 mm ± 10%
Connector
USB Type A
USB Type A
Windows 7 / XP / Vista, Linux
Compatibility
■
■
■
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
Power
UM-UV-621-W19-Q215V1
DVI-D
VGA
P.19
www.austin-hughes.com
< 4.6 > Options : Touchscreen & driver
19” Widescreen LCD Display
TRB / TCB Driver
Please follow the below steps to setup the touch screen:Step 1. Run the bundled CD disc or download the driver from the link below :
http://www.austin-hughes.com/downloads/UVDL/driver.html
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration
after the first setup
UM-UV-621-W19-Q215V1
P.20
www.austin-hughes.com
< 4.7 > Options : DC Power
Model
12V
24V
48V
110 ~ 125V
Input voltage:
12-Volt
24-Volt
48-Volt
110-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
66 ~ 160V
- No load
50 mA
50 mA
50 mA
40 mA
- Full load
4950 mA
2450 mA
1220 mA
993 mA
Output voltage:
12-Volt
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
8.4A
Efficiency
84%
85%
85%
92%
Input rating
Input current
Output rating
UM-UV-621-W19-Q215V1
P.21
www.austin-hughes.com
< 4.8 > Options : MIL-type or Lockable Connector
Input
MIL - type
Connector
Part no.
19” Widescreen LCD Display
MIL Standard
DC Power ***
( Male )
MS3470W8-33P
MIL - DTL - 26482
VGA ***
( Male )
MS3470W14-15P
MIL - DTL - 26482
*** There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most
design flexibility possible. For more information, please contact us.
Input
Lockable
Connector
Part no.
DC Power
( Male )
YM-Ext-461CP001
USB
LUSB - A111 - 00
Standard
D-type 3W3
-
*** MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
UM-UV-621-W19-Q215V1
P.22
www.austin-hughes.com
< 4.9 > Options : Quad Display
QD Specification
Item
Model Number
Description
QD (NTSC)
QD (PAL)
Number of Color
16.7 M
16.7 M
Imaging System
NTSC
PAL
1024 x 525
1024 x 625
60
50
Resolution
Refresh Rate
Video Input
Video Output
Camera Input
1.0 Vpp, 75 Ohm x 4
VCR Input
1.0 Vpp, 75 Ohm x 1
Live Monitor
1.0 Vpp, 75 Ohm x 1
Loop Through Out
1.0 Vpp, 75 Ohm x 4
VCR Output
1.0 Vpp, 75 Ohm x 1
Auto Gain Control
Yes
Time / Date
Yes
On Screen Display
Yes
Camera Title
Display Format
8 Character Title
2 x Zoom On
Playback
Yes
QUAD
Yes
FULL
Yes
SEQUENCY
Yes
Dwell Time
Alarm Inputs
Relay Outputs
0 to 99 Sec Adjustable
Selectable NO/NC Contacts x 4
NO/NC contacts x 1: 1A @DC24V Max.
Alarm Hold Time
1 Sec to Non-stop
Built-in Buzzer
Yes
Key Lock
Yes
*** For QD option, casing dimensions will be changed.
UM-UV-621-W19-Q215V1
P.23
www.austin-hughes.com
< 4.10 > Options : TV ( Analog )
19” Widescreen LCD Display
TV
Power BNC S-Video
Audio
out - in - in
Video PC
***
VGA
HDMI
For TV option :
( 1 ) The AD board comes standard with HDMI, VGA, S-Video, BNC, audio inputs and
RC-2 remote controller.
( 2 ) Casing dimensions will be changed.
UM-UV-621-W19-Q215V1
P.24
www.austin-hughes.com
How to Use RC-2 Remote Controller
1
8
2
INPUT
3
4
MUTE
1
2
3
4
5
6
7
8
9
AUTO
0
-/--
VOL
9
CH
10
FREEZE
11
1
12
MENU
5
SELECT
13
ASPECT
14
6
SLEEP
ENTER
15
16
7
BACK
20
SOURCE
SWAP
EXIT
PIP
POSITION
PIP
AUDIO
17
1
18
PIP
21
19
Water proof
1
INPUT
2
Switches on or off the TV
3
0-9
4
AUTO
MENU
5
6
▲ / ▼ / ◄ / ► / ENTER
7
BACK
MUTE
Vol + / CH + / FREEZE
- / -ASPECT
SELECT
SLEEP
EXIT
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Select the source
PIP functions
PIP
PIP AUDIO
POSITION
SOURCE
SWAP
UM-UV-621-W19-Q215V1
Only use in TV mode. Select channels. For channel numbers 10
and above, enter the second digit within two seconds.
Auto adjust
Display the menu on the screen or go to the previous menu
Go to the upper menu or select the previous value /
Go to the next menu or select the next value /
Decrease the setting value /
Increase the setting value or enter to the select item setting
Enter to the select item settings or excude the setting
Back to previous value
Turn on or off the speaker
Increase or decrease the speaker volume
For TV model only, increase or decrease the channel number
Reserve for OEM model
For setting input single or double digits
Adjust the screen size
To select the existing item
Select the sleeping time
Exit the menu or cancel
Picture in picture
To set the audio of in PIP mode
To set the screen position in PIP mode
PIP Source
Swap screen in PIP mode
P.25
www.austin-hughes.com
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2015 Austin Hughes Electronics Ltd. All rights reserved.
UM-UV-621-W19-Q215V1
www.austin-hughes.com