Using the Face Sharpener Function Page 160 of 678 pages Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and Enhancing Photos > Using the Face Sharpener Function Using the Face Sharpener Function You can sharpen out-of-focus faces in a photo. You can perform the Face Sharpener function either automatically or manually. 1. Select photos in the Select Images screen, then click (Correct/Enhance Images). The Correct/Enhance Images window appears. Note You can also display the Correct/Enhance Images window by clicking (Correct/Enhance Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview can be corrected/enhanced. See " Correct/Enhance Images Window " for details on the Correct/Enhance Images window. 2. Select the image you want to correct from the list displayed in the lower part of the Correct/Enhance Images window. The image appears in Preview. Note If only one image is selected, the thumbnail does not appear below Preview. Auto Correction 3. Make sure that Auto is selected.