Download Asus AGP-V2740 User`s manual

Transcript
III. INSTALLATION
Jumper Settings
1. Clear Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Turn off your computer and unplug your AC power, (2) Short the
two points (Labeled: CLRTC), (3) Turn on your computer, (4) Hold down
<Delete> during bootup and enter BIOS setup to re-enter user preferences.
R
Short small solder points to clear CMOS
CLRTC
Keyboard Power (KBPWR)
This allows you to disable or enable the keyboard wakeup function. Set to Enable if
you want to use your keyboard (by typing <SPACE>) to wake up your computer.
This feature requires an ATX power supply that can supply at least 300mA on the
+5VSB lead and new BIOS support. The default is set to Disable because not all
computers have the appropriate ATX power supply. Your computer will not function
if you set this to Enable and if you do not have the right ATX power supply.
1
2
3
KBPWR
1
2
3
2.
III. INSTALLATION
Jumpers
P2B Clear RTC RAM
Disable
Enable
R
P2B Keyboard Power
ASUS P2B User’s Manual
13