Motorola MVME712AM Installation guide Download

Transcript
Using the 162Bug Debugger
Valid expression examples:
Expression
4
Result (In Hex)
FF0011
FF0011
45+99
DE
&45+&99
90
Notes
@[email protected][email protected]
5C
%10011110+%1001
A7
88<<4
880
shift left
AA&F0
A0
logical AND
The total value of the expression must be between 0 and $FFFFFFFF.
Address as a Parameter
Many commands use ADDR as a parameter. The syntax accepted by 162Bug is
similar to the one accepted by the MC68040 one-line assembler. All control
addressing modes are allowed. An "address + offset register" mode is also
provided.
Address Formats
Table 4-1 summarizes the address formats which are acceptable for address
parameters in debugger command lines.
4-4
MVME162 Embedded Controller Installation Guide