Download Siemens SINUMERIK 802D sl Specifications

Transcript
06/2007
Overview of alarms
Cycle alarms
Program Continuation:
Clear alarm with the Delete key or NC START.
62920
Parameters:
Channel %1 block %2: Pocket surface not specified
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Reaction:
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the Delete key or NC START.
62921
Parameters:
Channel %1 block %2: Pocket depth not specified
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Reaction:
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the Delete key or NC START.
62922
Parameters:
Channel %1 block %2: Output program not specified
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Reaction:
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the Delete key or NC START.
62923
Parameters:
Channel %1 block %2: Starting point not specified
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Reaction:
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the Delete key or NC START.
62924
Parameters:
Channel %1 block %2: Too many elements in the contour
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Reaction:
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the Delete key or NC START.
62925
Parameters:
Channel %1 block %2: Radius specified together with center point
%1 = Channel number
%2 = Block number, label channel number
Definitions:
Reaction:
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the Delete key or NC START.
" Siemens AG 2007 All Rights Reserved
SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition
2-329