Download Alpine IVA-D100 Owner`s manual

01GB00IVAD100.book Page 1 Tuesday, February 14, 2006 4:10 PM
R
EN
Mobile Multimedia Station
IVA-D100
FR
TM
ES
DIGITAL VIDEO
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Dalian Dongtai Colour Printing Technology Co., Ltd.
No. 24 Liaohexisan Road, Dalian Economic&Technical
Development Zone, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
Printed in China (Y)
68-05946Z49-A
01GB01IVAD100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 2 Tuesday, February 14, 2006 4:10 PM
CHA-S634
CHA-1214
• CD changer for IVA-D100.
• Changeur CD pour IVA-D100.
• Cambiador de CD para IVA-D100.
• CD changer for IVA-D100.
• Changeur CD pour IVA-D100.
• Cambiador de CD para IVA-D100.
CHM-S630
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT.
The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW
PLAY BACK.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3
PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques
super compact doté de la fonction CD-R/RW PLAY BACK.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD
TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño
reducido con un CD-R/RW PLAY BACK.
01GB02IVAD100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 1 Tuesday, February 14, 2006 4:10 PM
R
EN
Mobile Multimedia Station
IVA-D100
FR
TM
ES
DIGITAL VIDEO
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Dalian Dongtai Colour Printing Technology Co., Ltd.
No. 24 Liaohexisan Road, Dalian Economic&Technical
Development Zone, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
Printed in China (Y)
68-05946Z49-A
01GB01IVAD100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 2 Tuesday, February 14, 2006 4:10 PM
CHA-S634
CHA-1214
• CD changer for IVA-D100.
• Changeur CD pour IVA-D100.
• Cambiador de CD para IVA-D100.
• CD changer for IVA-D100.
• Changeur CD pour IVA-D100.
• Cambiador de CD para IVA-D100.
CHM-S630
Alpine CD Changers Give You More!
More musical selections, more versatility, more convenience.
The CHA-S634 is a high-performance 6-disc changer with a new M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK and CD TEXT.
The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S630 M-Bus model is a super-compact 6-disc changer with a CD-R/RW
PLAY BACK.
Changeurs de CD Alpine : vous avez le choix!
Plus de sélections musicales, plus de souplesse, plus de confort.
Le modèle CHA-S634 est un changeur 6 disques ultra performant équipé des nouvelles fonctions M DAC, CD-R/RW PLAY BACK, MP3
PLAY BACK et CD TEXT. Le modèle CHA-1214 Ai-NET contient 12 disques. Le modèle CHM-S630 M-Bus est un changeur 6 disques
super compact doté de la fonction CD-R/RW PLAY BACK.
¡Los cambiadores Alpine de CD le ofrecen más!
Más selecciones musicales, más versatilidad y más ventajas.
CHA-S634 es un cambiador de seis discos de alto rendimiento con nuevo M DAC, CD-R/RW PLAY BACK, MP3 PLAY BACK y CD
TEXT. El modelo CHA-1214 Ai-NET alberga 12 discos y el modelo CHM-S630 M-Bus es un cambiador de seis discos de tamaño
reducido con un CD-R/RW PLAY BACK.
01GB02IVAD100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 1 Tuesday, February 14, 2006 4:10 PM
ENGLISH
Contents
CD/MP3/WMA
Playback ..........................................................15
Operating Instructions
WARNING
WARNING ................................................. 4
CAUTION .................................................. 4
PRECAUTIONS ........................................ 5
Repeat Play .....................................................16
M.I.X. (Random Play) ....................................16
Selecting Folders
(concerning MP3/WMA) .............................16
About MP3/WMA ..........................................16
DVD/Video CD
Detaching and Attaching the Front Panel ...... 10
Playing a Disc ................................................18
To display the DVD mode screen ...............18
If a menu screen appears .............................19
Displaying the Top Menu Screen ...............20
Displaying the Menu Screen ......................20
Displaying the Menu Operation Mode
Screen ......................................................20
Searching by Program ....................................20
Initial System Start-Up ................................... 10
Searching by Playlist ......................................20
Turning Power On or Off ............................... 10
Stopping Playback (PRE STOP) ....................20
Opening/Closing the Monitor ........................ 10
Stopping Playback .........................................21
Moving the Monitor to be Flat ....................... 11
Fast-forwarding/Fast-reversing ......................21
Adjusting the Volume ..................................... 11
Finding the Beginnings of Chapters or
Tracks .........................................................21
Discs Playable on This Unit ................... 6
Getting Started
Accessory List .................................................. 9
Location of Controls ........................................ 9
Lowering Volume Quickly ............................. 11
How to view the Display ................................ 11
PulseTouch™ operation .............................. 11
Recalling the Source ................................... 11
About the GlideTouch bar ........................... 12
Displaying the Numeric Keypad Input
Screen ...................................................... 13
Radio
Listening to the Radio .................................... 13
Setting Analog Mode
(HD Radio mode only) ............................... 14
Manual Storing of Station Presets .................. 14
Automatic Memory of Station Presets ........... 14
Tuning to Preset Stations ................................ 14
Changing the Display
(HD Radio mode only) ............................... 14
Playing Still Frames (Pausing) .......................21
Forward/reverse frame-by-frame Playback ....21
Slow Motion Playback ...................................21
Selecting Program (SKIP) .............................22
Selecting Playlist (SKIP) ...............................22
Repeat Playback .............................................22
Searching by Title/Group/Program/
playlist Number ..........................................23
Searching Directly by Chapter or
Track Number .............................................23
Switching the Angle .......................................23
Scroll to Move the Page Forward or Back .....23
Switching the Audio Tracks ...........................23
Switching the Subtitles (Subtitle Language) .24
Switching from the disc menu ....................24
Displaying the Disc Status for DVD/
Video CD ....................................................24
1-EN
01GB03IVAD100TOC.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 2 Tuesday, February 14, 2006 4:10 PM
Other Useful Features
Adjusting the Audio (Adjusting the Bass/Treble/
Balance/Fader/Loudness/Subwoofer/
Nav. Level/Defeat) ....................................... 25
Search Function .............................................. 26
Rear Selection Function .................................. 26
Switching Display Modes ............................... 26
Switching the Visual Source Only
(Simultaneous Function) ............................. 27
Cancelling the Simultaneous Function ........ 27
Blackout Mode On and Off ............................ 27
Setting rear Camera Interruption .................... 27
Monitor Setting
Monitor Setting Operation .............................. 28
Adjusting the Monitor Angle ...................... 28
Selecting the Monitor Position .................... 28
Setting Automatic Opening/Closing
of the Monitor .......................................... 28
Setup
DVD Setup
DVD Setup Operation ..................................... 28
Setting of the Menu Language .................... 29
Setting of the Audio Language ................... 29
Setting of the Subtitle Language ................. 29
Changing the Country Code Setting ........... 29
Setting the Rating Level (Parental Lock) .... 30
Changing the Digital Output Setting ........... 30
Setting the Downmix Mode ........................ 32
Setting the TV Screen Setting ..................... 32
Setting of the Bonus Code .......................... 32
Setting the DVD-Audio Playback Mode .... 32
Setting the Video CD Play Mode ................ 32
GENERAL Setup
General Setup Operation ................................ 33
Displaying the Time .................................... 33
Setting the Time .......................................... 33
Setting Daylight Saving Time ..................... 33
Demonstration Function .............................. 33
Sound (Beep) Guide Function ..................... 33
Setting the Scroll ......................................... 34
Setting the Auxiliary Data Field Display .... 34
Playing MP3/WMA Data ............................ 34
Changing the Russian Font ......................... 34
Adjusting the Dimmer of Button Lighting
at Night .................................................... 34
SYSTEM Setup
System Setup Operation ................................. 34
Setting the External Device Interrupt
Mode ........................................................ 35
Setting the Navigation Mode ....................... 35
Setting the Navigation Interruption ............. 35
Setting the AUX Mode ................................ 35
Adjusting the External Input Audio Level ... 35
Switching the Visual Input Signal ............... 35
Setting the Picture Output ........................... 36
Setting the VISUAL Button ........................ 36
Subwoofer On and Off ................................ 36
Setting the Digital Output ........................... 36
DISPLAY Setup
Display Setup Operation ................................. 36
Setting the Brightness of the
Backlighting ............................................. 37
Adjusting the Minimum Level of
Backlight .................................................. 37
Switching Background Textures ................. 37
Setting Automatic Background Textures .... 37
Switching the Font Background Color ........ 37
Turning the Touch Panel Vibration
ON or OFF ............................................... 37
Adjusting the Touch Panel .......................... 37
i-Personalize™
VISUAL EQ™
Visual EQ Setting Operation .......................... 38
Selecting the VISUAL EQ Mode
(Maker’s setting) ...................................... 38
Adjusting Brightness ................................... 38
Adjusting Color of Picture .......................... 38
Adjusting Tint of Picture ............................. 39
Adjusting Image Contrast ........................... 39
Adjusting Picture Quality ............................ 39
Storing VISUAL EQ ................................... 39
Data Download
Downloading the BACKGROUND data ........ 39
External Audio Processor (Optional)
Adjustment Procedure for Dolby Surround .... 40
Setting the Speakers ........................................ 41
2-EN
01GB03IVAD100TOC.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 3 Tuesday, February 14, 2006 4:10 PM
Set MX Mode of the External Audio
Processor ..................................................... 41
X-OVER Adjustment ...................................... 41
Performing Time Correction Manually
(TCR) .......................................................... 42
Phase Switching .............................................. 43
Graphic Equalizer Adjustments ...................... 43
Parametric Equalizer Adjustments ................. 43
Setting Bass Sound Control ............................ 44
Setting Bass Compressor ............................. 44
Setting Bass Focus ...................................... 44
Speaker Setup ................................................. 44
Setting of Dolby Digital ................................. 45
Adjusting the acoustic image
(BI-PHANTOM) ...................................... 45
Mixing bass sound to the rear channel
(REAR MIX) ........................................... 45
Achieving powerful high volume sound
(LISTENING) .......................................... 45
Adjusting the speaker levels
(OUTPUT LEVEL) ................................. 45
Adjusting the DVD Level ............................... 46
Storing Settings in the Memory ...................... 46
Recalling the Preset Memory ......................... 46
Using the Pro Logic II Mode .......................... 46
Linear PCM Setting ........................................ 47
Navigation System (Optional)
Switching the Navigation Screen
(Optional) .................................................... 47
Auxiliary Device (Optional)
Receiving Stored Channels ............................. 51
Displaying the Category/Channel Name Title
List ............................................................... 51
Selecting the Channel directly ........................ 52
Receiving Weather or Traffic information from
SAT Radio ................................................... 52
iPod® (Optional)
Playback .......................................................... 52
Searching for a desired Song .......................... 53
Searching by Playlist ................................... 53
Searching by artist name ............................. 53
Searching by album name ........................... 53
Searching by song name .............................. 53
Direct Search Function ................................... 54
Selecting Playlist/Artist/Album ...................... 54
Random Play Shuffle (M.I.X.) ....................... 54
Repeat Play ..................................................... 54
Remote Control
Controls on Remote Control ........................... 55
When Using the Remote Control .................... 56
Battery Replacement ....................................... 57
Information
About DVDs ................................................... 58
Terminology .................................................... 58
List of Language Codes .................................. 60
List of Country Codes ..................................... 61
In Case of Difficulty ....................................... 63
Specifications .................................................. 67
Operating Auxiliary Devices (Optional) ........ 48
Changer (Optional)
Controlling CD Changer (Optional) ............... 49
Multi-Changer Selection (Optional) ............... 49
HDD Player Operation (Optional)
Listening to Music of HDD ............................ 50
SAT Radio Receiver (Optional)
Receiving Channels with the SAT Receiver
(Optional) .................................................... 50
Installation and
Connections
Warning .................................................. 68
Caution ................................................... 68
Precautions ............................................ 68
Installation ...................................................... 69
Connections .................................................... 72
System Example ............................................. 75
Tuning in to Categorized Programs ................ 51
Changing the Display ..................................... 51
Checking the SAT Radio ID Number ............. 51
LIMITED WARRANTY
Storing Channel Presets .................................. 51
3-EN
01GB03IVAD100TOC.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 4 Tuesday, February 14, 2006 4:10 PM
Operating Instructions
WARNING
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch
TV/Video while driving a vehicle. Installing this product
incorrectly enables the driver to watch TV/Video while driving.
This may cause a distraction, preventing the driver from looking
ahead, thus causing an accident. The driver or other people could be
severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISE WHILE DRIVING.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES.
INSERT WITH THE CORRECT BATTERY POLARITY.
When inserting the batteries, be sure to observe proper polarity
(+ and -) as instructed. Rupture or chemical leakage from the
battery may cause fire or personal injury.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
4-EN
01GB04IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 5 Tuesday, February 14, 2006 4:10 PM
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
New Discs
To prevent the CD from jamming, “DISC ERROR” is displayed if
discs with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Center Hole
Center Hole
New Disc
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Outside
(Bumps)
Bumps
Damaged Disc
Installation Location
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Make sure the IVA-D100 will not be installed in a location
subjected to:
Maintenance
•
•
•
•
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“DISC ERROR” will be displayed on your player if you insert a
disc incorrectly. If “DISC ERROR” continues to be displayed even
though the disc has been inserted correctly, push the RESET switch
with a pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Irregular Shaped Discs
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
5-EN
01GB04IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 6 Tuesday, February 14, 2006 4:10 PM
Disc Accessories
Discs Playable on This Unit
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause operational problems. We recommend
not using these accessories on discs played in Alpine DVD players.
Playable Discs
The discs listed below can be played on this unit.
Mark (logo)
Recorded content
Disc size
Audio
+
Video
12 cm*
Audio
+
Video
12 cm*
DVD Video
Transparent Sheet
8 cm
Disc Stabilizer
Handling the Detachable Front Panel
DVD Audio
8 cm
• Do not expose to rain or water.
• Do not drop or subject to shock.
• After turning the system off, a slight ghost of the image will
remain temporarily. This is an effect peculiar to LCD technology
and is normal.
• In cold temperature conditions, the screen may lose contrast
temporarily. After a short warm-up period, it will return to
normal.
Alpine products equipped with the Ai-NET bus, connected to the
IVA-D100, can be operated from the IVA-D100. Depending on the
products connected, the functions and displays will vary. For
details, consult your Alpine dealer.
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the IVA-D100. This
has been done for the safety of the driver and passengers.
Audio Processor Adjustments cannot be made if the car is moving.
The car must be parked and the parking brake must be engaged for
the procedure described in the Owner’s Manual to be valid. The
warning “CAN’T OPERATE WHILE DRIVING,” will be
displayed if any attempts are made to perform these operations
while driving.
12 cm
Audio
+
Video
Video CD
8 cm
12 cm
Music CD
Audio
8 cm
(CD single)
* Two-layer DVD disc compatible
About the supplied Power Amplifier
The supplied Power Amplifier is designed for use only with the
IVA-D100. If products other than IVA-D100 are connected to the
supplied Power Amplifier, its specified performance is not
guaranteed.
6-EN
01GB04IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 7 Tuesday, February 14, 2006 4:10 PM
Discs that cannot be played
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA
files), photo CDs, etc.
DualDisc
This unit is not compatible with DualDisc.
Using a DualDisc may cause unit malfunction, and may cause disc
damage when the disc is inserted/ejected.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 1
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD. The IVA-D100 can only read multisession
DATA Formatted discs (MP3/WMA files - Not Audio CD files).
Properly formatted MP3/WMA Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions*.
*Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
1
ALL
Video CDs
This DVD head unit is compatible with playback control (PBC)
compatible video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialog style.
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable)
which have been recorded only on audio devices. You can also play
CD-Rs/CD-RWs containing MP3/WMA formatted audio files.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA files written in a format compliant
with this unit. For details, see pages 16 and 17.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own CDs
The IVA-D100 plays DVD Video, DVD Audio, Video CD, Audio
CD and has a built in MP3/WMA decoder.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA encoded CD-R/RW
files).
What is the difference between an Audio and MP3/WMA CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer
3)/WMA (Windows Media Audio) is a data file that uses a
compression scheme to reduce the size of the music file.*
Hybrid Audio CD and Data (MP3/WMA) CD-R/RW discs:
The IVA-D100 can read either sector on the disc. Choose CD-DA
to play the CD audio section or MP3/WMA to play the MP3/WMA
section.*
7-EN
01GB04IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 8 Tuesday, February 14, 2006 4:10 PM
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
Disc terminology
• This unit is compatible discs recorded in the DVD-Video and
DVD-VR mode.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/DVDRWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
• This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
• “DTS” and “DTS2.0 + Digital Out” are trademarks of Digital
Theater Systems, inc.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, the Apple logo and iPod are trademarks of Apple
Computer, Inc., registered in the U.S. and other countries.
• HD Radio™ Technology Manufactured Under License From
iBiquity Digital Corporation. iBiquity Digital and the HD
Radio and HD Symbols are trademarks of iBiquity Digital
Corporation. U.S. and Foreign Patents.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer llS and Thomson”
• “Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com.”
8-EN
01GB04IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 9 Tuesday, February 14, 2006 4:10 PM
Getting Started
Accessory List
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Monitor unit ..........................................................................1
Power Amplifier....................................................................1
DC/DC Converter ................................................................1
Power Cable ........................................................................1
Amplifier Cable ....................................................................1
RCA Extension Cable ..........................................................2
Mounting Sleeve ..................................................................1
Mounting Bracket ................................................................2
Flush Head screw (M4 x 3)..................................................8
Hexagon washer-head screw (M4 x 6)................................4
Screw (M4 x 8).....................................................................4
Flange-head tapping screw (M4 x 14) ................................2
Hexagonal screw (M4 x 15).................................................4
Velcro Fastener....................................................................2
Front Frame .........................................................................1
Remote Control....................................................................1
Battery (CR2025).................................................................1
Carrying case ......................................................................1
Owner's Manual.............................................................1 set
BAND/SAT button
Radio mode: Changes the band.
Visual source (except navigation screen): Changes the
display mode.
Press this button for at least 2 seconds to recall a weather
channel or traffic channel. Note however, this setting can be
made only if the XM or SIRIUS Receiver Box is connected.
VISUAL button
Press and hold for at least 2 seconds to recall the VISUAL
selection screen.
If VISUAL is set in “Setting the VISUAL Button” (page 36),
momentarily press to recall the VISUAL selection screen,
and if NAV. is set, momentarily press to recall the navigation
screen.
Visual Indicator
Lights up in simultaneous mode.
SETUP button
Recalls the SETUP selection screen.
OPEN/CLOSE/FLAT button
Opens the monitor. Closes the monitor by pressing and
holding for at least 2 seconds.
Press to set the open monitor to the flat position.
button
Ejects a disc.
button
Use this button to remove the front panel.
DISC IN Indicator
Lights up when a disc is inserted in the unit.
Guide Indicator
The indicator is constantly lit, other than for the following
indicators.
• The indicator blinks when closing the monitor.
• The indicator is turned off when the dimmer (monitor
display brightness) is set to ON, and is also turned off
according to the brightness of the car when the dimmer
is set to AUTO.
• If ON is set in “Setting the Brightness of the Backlighting”
(page 37), the brightness is set by adjusting in “Adjusting
the Dimmer of Button Lighting at Night” (page 34).
However, if the level is set to “-2”, the guide indicator
turns off.
• The indicator slowly blinks when the backlighting (BLACK
OUT function) is set to OFF.
• The indicator blinks in the voice guidance mode when an
ALPINE navigation system is connected.
Disc Guide Indicator
Location of Controls
Rotary encoder/MUTE/MODE
Adjust the volume by turning to the left or right.
Turns the Mute mode on or off by pressing repeatedly.
If pressed and held for at least 2 seconds, the audio
adjusting screen is displayed.
Lights up when power is turned on.
About the expression of buttons in this Owner’s
Manual
• The buttons on this unit are expressed in bold (e.g. SOURCE/
POWER). The touch buttons on the display are expressed in bold
with [ ] (e.g. [BAND]).
Remote Sensor
Point the supplied remote control transmitter towards the
remote sensor within a range of 2 meters.
SOURCE/POWER button
Turns the power on. Press and hold for at least 2 seconds to
turn the power off.
Monitor open: Recalls the source selection screen.
Monitor closed: Changes the source.
9-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 10 Tuesday, February 14, 2006 4:10 PM
Detaching and Attaching the Front Panel
Detaching
1
2
3
Turn off the unit power.
Press (Release) at the lower right side until the
front panel pops out.
Grasp the right side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
Attaching
1
2
Insert the left side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Push the right side of the front panel until it locks
firmly into the main unit.
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press SOURCE/POWER to turn on the unit.
• The unit can be turned on by pressing any button on the unit except
OPEN/CLOSE, FLAT and
(Eject).
2
Press and hold SOURCE/POWER for at least 2
seconds to turn off the unit.
• The IVA-D100 draws minimal current even when its power switch is
turned off. If the switched power (ignition) lead of the IVA-D100 is
connected directly to the positive (+) post of the vehicle's battery, the
battery may be discharged. If this lead is unswitched, it must be
disconnected from the battery post should the vehicle be left unused
for an extended period of time.
An SPST (Single-Pole, Single-Throw) switch (sold separately) can be
added to simplify this procedure. Then, you can simply place it in the
OFF position when you leave the vehicle. Turn the SPST switch back
ON before using the IVA-D100. For connecting the SPST switch,
refer to the “Connection Diagram of SPST Switch (Sold Separately)”
(page 71).
• Some operation of the unit cannot be performed while the vehicle is
in motion. In this case, be sure to first stop your vehicle and apply the
parking brake, then perform the operation.
Opening/Closing the Monitor
1
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Initial System Start-Up
Immediately after installing or applying power to the unit, it should be
initialized. To do this, first, remove the detachable front panel. Behind
the front panel, to the left of the connector, there is a small hole. Using a
pencil or other pointed object, press the reset switch mounted behind
this hole to complete the initialization procedure.
• Any of the buttons does not function while the monitor is closing by
reset.
Press OPEN.
The unit beeps 3 times and opens the monitor automatically.
2
Press and hold OPEN (CLOSE) for at least 2
seconds.
The unit beeps 3 times and closes the monitor
automatically.
• Opening/closing the monitor should never be performed manually. It
may cause a malfunction.
• The monitor's angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Angle” on page 28.
Even when the vehicle’s battery power is removed, the adjusted
monitor angle remains stored in memory.
• The IVA-D100 is a precision device. With gentle handling, its unique
capabilities can be enjoyed for a long time.
• If the monitor touches anything while it is being opened (or closed),
the monitor will stop opening (or closing) immediately. Should this
occur, remove the obstacle and press and hold OPEN for at least 2
seconds again to lower the monitor.
• When the movable monitor is opened, do not place any object on the
monitor and be careful not to bump or apply any pressure to the
monitor while it is open. This can cause damage to the mechanism.
• In low ambient temperature conditions, the display may be dark for a
short period of time immediately after the power is turned on. Once
the LCD has warmed up, the display returns to normal.
• For your safety, some operation of the unit cannot be performed
while the vehicle is in motion. In this case, first stop the vehicle and
engage the parking brake, then perform the operation.
10-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB05IVA100.fm Page 11 Thursday, February 16, 2006 6:20 PM
Moving the Monitor to be Flat
When you want to operate some function on the car (air conditioner,
etc.) which is hidden by the raised monitor, use this function.
1
When the monitor is open, press OPEN (FLAT).
The monitor moves to the flat position.
2
Recalling the Source
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press SOURCE/POWER.
The source selection screen is displayed.
Display example for source selection screen
Press OPEN (FLAT) again.
The monitor returns to the previous angle.
• The monitor returns to the previous angle 10 seconds after being
moved to the flat position.
• If an excessive force is added to the monitor when the monitor is flat,
putting an object on the back of the monitor for example, it may
cause a malfunction.
Adjusting the Volume
Adjust the volume by turning the Rotary encoder.
Volume: 0 - 35
Lowering Volume Quickly
Selection button for each source
Touching a source will change to the selected main source
screen.
Scrolls the page list up or down.
(Displayed when the list items cannot be displayed entirely)
Activating this function will instantly lower the volume level by 20 dB.
Press MUTE (Rotary encoder) to activate the MUTE
mode.
The audio level decreases by about 20 dB.
Pressing MUTE (Rotary encoder) again brings the audio back to
its previous level.
How to view the Display
Scrolls the list item by item.
Touching and holding will scroll continuously.
(Displayed when the list items cannot be displayed entirely)
GlideTouch bar display
For operation, refer to “About the GlideTouch bar”
(page 12).
(Displayed when the list items cannot be displayed entirely)
Returns to the previous screen.
• The kind of source modes that are displayed varies depending on
connection and setting.
PulseTouch™ operation
The display unit is equipped with onscreen, tactile feedback
(PulseTouch™).
What is the tactile feedback (PulseTouch™) ?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
• To protect the display, touch the onscreen button with the tip of your
finger.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• If you touch two buttons at the same time, a malfunction may occur.
Onscreen buttons are expressed as follows in this Owner’s
Manual.
• Onscreen buttons are shown in bold, enclosed in [ ] (e.g.
[BAND]).
11-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 12 Tuesday, February 14, 2006 4:10 PM
2
Touch [
] of RADIO.
The screen changes to the Radio mode main display.
Main screen example for FM Radio mode
About the GlideTouch bar
The following explanations are for the display that appear on the main
source screen or the SETUP item screen by GlideTouch bar operation.
GlideTouch
bar display
Perform the
touch
operation in
this area.
Displays the source name, such as radio band, etc.,
that is selected
Working state indicator
Displays volume level
GlideTouch bar display
For operation, refer to “About the GlideTouch bar”
(page 12).
Function Guide:
The following example explains operation of the chapter display.
The function guide display varies depending on each
source.
Touching [PAGE1/2]* or [PAGE1/3]* on the function guide
will change the contents of the function guide, allowing for
many other operations to be performed.
(A)
Displays time
* Display may vary depending on the connected devices.
• When an optional DVD player or DVD changer compatible with
Ai-NET is connected, AUX appears as “EXT.DVD” or “DVD
CHANGER” in the display.
• When both the optional DVD player and DVD changer compatible
with Ai-NET are connected, AUX appears as "EXT.DVD" and DVD
changer as "DVD CHANGER" in the display.
• When i-Personalize and OTHER SETUP are selected, these
operations may only be carried out after the car is parked.
3
Press SOURCE/POWER on the unit to change the
screen to another source.
• Pressing VISUAL on the unit will change to the VISUAL selection
screen.
Set to VISUAL in “Setting the VISUAL Button” (page 36).
• Pressing SETUP on the unit will change to the SETUP selection
screen.
(B)
(A)
• Touch to go back a chapter.
• Touch and hold to fast-reverse.
(B)
• Touch to go forward a chapter.
• Touch and hold to fast-forward.
• Touch and slide your finger along the GlideTouch bar from right to
left to go continuously back through chapters, etc.
• Touch and slide your finger along the GlideTouch bar from left to
right to go continuously forward through chapters, etc.
• During operation, the arrow animation is displayed on the
GlideTouch bar.
• Depending on the mode, slide touch operation may not be possible.
• When the list items cannot be displayed entirely in one screen, the
GlideTouch bar display appears.
The GlideTouch bar function (display) varies depending the
source.
Mode display:
SOURCE/VISUAL/SETUP Selection screen
FOLDER/FILE/CATEGORY/CH NAME Search
screen, etc.
GlideTouch bar display example
Page changes.
Mode display:
CD/DVD-Audio/Video CD main screen
GlideTouch bar display example
Track changes
12-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 13 Tuesday, February 14, 2006 4:10 PM
Mode display:
MP3/WMA/iPod/MMDRIVER main screen
GlideTouch bar display example
Display example for FM Radio main screen
File changes.
Mode display:
Radio
DVD Video/DVD-VR main screen
GlideTouch bar display example
Chapter changes.
Mode display:
Radio/SAT/HD Radio main screen
GlideTouch bar display example
Displays the preset number/frequency.
GlideTouch bar display
Recalls the stored preset number.
For operation, refer to “About the GlideTouch bar”
(page 12).
Mode display:
This unit cannot receive HD Radio™ signals (digital
terrestrial radio). In order to activate the digital radio
functions described below, an optional HD Radio Tuner
module must be connected through the Ai-NET bus.
External TV main screen
GlideTouch bar display example
Channel number changes.
Listening to the Radio
Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD or Video
CD mode is selected for searching a title or chapter, and for entering a
country code or password for the DVD setup item, and also when
selecting a channel number in the SAT Radio mode.
1
2
1
The source selection screen is displayed.
Receiving Analog Radio:
2
Display example for numeric keypad
Touch [
] of RADIO.
The radio mode is activated and the display changes to the
Radio Mode screen.
Touch [10KEY] on the main source screen.
Touch the desired numeric key.
Press SOURCE/POWER.
Receiving HD Radio (if TUA-T500HD is connected):
2
Touch [
] of HD-Radio.
The digital radio mode is activated and the display changes
to the HD Radio Tuner Mode screen.
3
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
FM-1
4
FM-2
AM
FM-1
Touch [TUNE] to choose the tuning mode.
Each touch changes the tuning mode display.
Input screen area
Closes numeric keypad input screen
All input numbers will be deleted
Previous number will be deleted
Input number is confirmed
Numeric keypad
The numeric keypad input screen closes when the area
is touched while displayed.
3
Touch [ENT] to confirm your entry.
Distance
Local
Manual
Distance
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode (with DX SEEK indicator ON);
Both strong and weak stations will be tuned in.
- Local mode (with SEEK indicator ON);
Only strong stations will be tuned in.
The initial setting is DX.
13-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 14 Tuesday, February 14, 2006 4:10 PM
5
Touch [
], [
] or [
], [
] to change the
radio frequency up or down respectively.
In the manual mode, touch and hold to change the
frequency continuously.
• “DIGITAL” is displayed when a digital radio station is received.
Tuning to Preset Stations
You can tune in the preset stations in memory on each band using the
preset number.
1
Setting Analog Mode (HD Radio mode
only)
2
Touch [ANALOG] in HD Radio Tuner mode main
screen.
Switches to analog mode, and the [ANALOG] button turns
orange.
Touch [ANALOG] again to cancel analog mode.
Manual Storing of Station Presets
1
2
3
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
Touch [PAGE1/2] to change the function guide.
Touch and hold any one of the preset buttons [P-1]
through [P-6] for at least 2 seconds.
Touch any one of the preset buttons [P-1] through
[P-6] that has a station stored to it.
The preset station is received.
While receiving HD radio, you can switch to analog signal mode, even
in areas that receive digital radio station signals.
1
After selecting the desired band, touch [PAGE1/2]
to change the function guide.
Changing the Display (HD Radio mode
only)
Text information, such as Station name, Song title, Artist, etc., is
displayed while receiving a digital radio station.
1
Touch [INFO.] on the HD Radio Tuner mode main
screen.
Each time you touch this button, the display changes as
shown below.
Short Station Name *1
Song title *2
Artist *2
Long Station Name *1
Album *2
The selected station is stored.
4
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
*1 Displays Short Station Name / Long Station Name in the Station
Information Service Data.
*2 Displays Song title / Artist / Album in the main program Service
Data.
A total of 18 stations can be stored in the preset memory (6
stations for each band; FM1, FM2 and AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Automatic Memory of Station Presets
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch [A.MEMO].
The tuner automatically seeks and stores 6 strong stations into
[P-1] to [P-6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P-1].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
14-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 15 Tuesday, February 14, 2006 4:10 PM
CD/MP3/WMA
Display example for MP3/WMA main screen
Playback
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Touch [
] of DVD PLAYER.
The display shows the DVD player mode screen.
When a CD/MP3/WMA is inserted into the DISC SLOT of the
IVA-D100, with the label side facing up, the unit starts to
play the CD/MP3/WMA.
3
] or [
] to select the desired track
Returning to the beginning of the current track (file):
Touch [
].
CD:
Displays track text*1 in the upper line.
Displays Disc Text/Artist *1 in the lower line.
• If there is neither Track nor Disc name information, “NO
TEXT” will be displayed.
MP3/WMA:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name in the lower line, the album
name/artist name are displayed if there is ID3 tag
information.
CD:
number*2/track
Displays the disc
number/elapsed time.
MP3/WMA:
Displays the disc number*3/folder number/file number/
elapsed playback time
GlideTouch bar display
For operation, refer to “About the GlideTouch bar”
(page 12).
[
Touch [
(file).
] button: Refer to page 26
*1 Displayed when a CD text disc is inserted.
*2 Displayed when a CD changer is connected.
*3 Displayed when an MP3 compatible CD changer is connected.
Fast reverse :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
].
To pause playback
Touch [ /
Touching [
].
/ ] again will resume playback.
To eject the disc
Press
.
• If the disc does not eject, press and hold for at least 2 seconds.
• The IVA-D100 model includes a built-in MP3/WMA unit. You can
play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA files on
this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA files,
refer to pages 16 and 17 before using the unit.
• A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA
data.
• The MP3/WMA indicator is lit during MP3/WMA playback.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8cm) CD’s can be used.
• “Playing MP3/WMA Data” is mentioned on page 34 “GENERAL
Setup.”
• When an MP3/WMA disc is played, it sometimes takes a few moment
until it starts.
• Touch [ ] to activate the search mode. For operations, refer to
“Search Function” on page 26.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If the disc is left in the unit after pressing , the disc is automatically
pulled back into the unit and paused. In this case, start playback by
touching [ / ] or eject again and remove the disc within 15
seconds.
15-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 16 Tuesday, February 14, 2006 4:10 PM
Repeat Play
About MP3/WMA
Touch [
] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
Touch [
] again and select OFF to deactivate Repeat play.
RPT DISC*1
CD: RPT
(off)
RPT
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA data) or distributing, transferring, or copying it, whether
for free or for a fee, without permission of the copyright holder is
strictly prohibited by the Copyright Act and by international
treaty.
MP3/WMA:
1 Touch [PAGE1/2]*3 to change the function guide.
2 Touch [
] and select the desired Repeat play.
RPT
RPT FLDR*2
RPT DISC*1
(off)
RPT
*1 If a CD Changer or an MP3 compatible CD changer is connected
and the RPT DISC mode is selected, the unit repeatedly plays back
all tracks (files) on the disc selected.
*2 Only files in a folder are repeatedly played back.
*3 Display may vary depending on the connected devices.
M.I.X. (Random Play)
Touch [
The tracks (files) on the disc will be played back in a random
sequence.
CD: M.I.X.
M.I.X. ALL*1
M.I.X.
MP3/WMA:
1 Touch [PAGE1/2]*4 to change the function guide.
2 Touch [
] and select the desired M.I.X. play.
M.I.X. FLDR*3
M.I.X.*2
(off)
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA allows you to create music files and store them at higher
ratios of compression than MP3 audio data (approx. half original
size). This is achieved while still maintaining CD quality sound.
Method for creating MP3/WMA files
].
(off)
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
What is WMA?
] during playback.
To cancel M.I.X. play, touch [
What is MP3?
M.I.X. FLDR*3
*1 If a CD Changer equipped with the M.I.X. ALL function is connected,
M.I.X. ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will
be included in the random playback sequence.
*2 If an MP3 compatible CD changer is connected, all files in a disc are
played back in random sequence, and playback shifts to the next disc.
*3 Only files in a folder are played back in random sequence in the
M.I.X. FLDR mode.
*4 Display may vary depending on the connected devices.
Audio data is compressed by using MP3/WMA specified
software. For details on creating MP3/WMA files, refer to the
user’s manual for that software.
MP3/WMA files that can be played back by this device have the
file extension “mp3” / “wma”. Files with no extension cannot be
played back. (WMA ver. 7.1 and 8 are supported)
Supported playback sampling rates and bit rates
MP3
Sampling rates: 32 kHz ~ 48 kHz
Bit rates:
32 - 320 kbps
WMA
Sampling rates: 32 kHz ~ 48 kHz
Bit rates:
32 - 320 kbps
This device may not play back correctly depending on sampling
rates or bit rates.
ID3 tags/WMA tags
Selecting Folders (concerning MP3/
WMA)
Touch [
FLDR] or [FLDR
] to select the folder.
If tag data is in an MP3/WMA file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data
(maximum 128 characters).
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported characters,
“NO SUPPORT” is displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Producing MP3/WMA discs
MP3/WMA files are prepared, then written to a CD-R or CD-RW
(DVD-R/DVD-RW) using CD-R writing software. A disc can hold
up to 1024 files/256 folders (including Root Folders).
Depending on the folder/file structure of the disc, it can take
several minutes to read a disc. In this case, it is recommended
to reduce the number of folders used.
16-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 17 Tuesday, February 14, 2006 4:10 PM
Terminology
Media supported
The media that this device can play back are CD-ROMs, CD-Rs
and CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, etc., and other
standards that conform to ISO9660. However, sometimes the
file names, folder names, etc., are not displayed correctly.
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of
44.1 kHz, so the sound is sampled (recorded) 44,100 times per
second. The higher the sampling rate, the higher the sound quality,
but also the larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Formats supported
This device supports CD-ROM, CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA files.
MP3: ID3 tag
WMA: WMA tag
Root folder
Order of files
The unit plays the files in the order that the writing software
writes them. Therefore, the playing order may not be the same
as the order you input. The playback order of the folders and
files is as follows. However, the folder and file playback order
differs from the folder no. and file no. indicated on the display.
The root folder is found at the top of the file system. The root folder
contains all folders and files.
Root
Folder
Folder
MP3/WMA File
17-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 18 Tuesday, February 14, 2006 4:10 PM
DVD/Video CD
Display example for DVD Video main screen
Playing a Disc
IVA-D100 has a built-in DVD player. When an optional Alpine DVD/
video CD/CD player (or DVD changer) is connected to the IVA-D100,
you can control it from the IVA-D100. (except some operations)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the DVD/TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Install the IVA-D100 correctly so that the driver cannot
watch DVD/TV/Video unless the vehicle is stopped
and the emergency brake is applied.
Displays the disc (DVD VIDEO, DVD AUDIO,
PROGRAM/PLAYLIST (DVD-VR), VIDEO CD) being
played back.
Displays the title number/chapter number/elapsed
playback time for a DVD Video.
Displays the group number/track number/elapsed playback
time for a DVD Audio.
Displays the program or playlist number/chapter number/
elapsed playback time for a DVD-VR.
Displays the track number/elapsed playback time for a
video CD (When PBC is turned off).
GlideTouch bar display
For operation, refer to “About the GlideTouch bar”
(page 12).
• Some operations cannot be carried out depending on the disc or
playback screen.
• Displays of the function guide [PAGE1/2], etc., may vary depending
on the connected device(s).
Disc types that can be used for each heading are
represented by the following marks.
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video
mode can be used.
(including discs containing both DVD video
and DVD audio data that are played back
when “VIDEO” is set in “Setting the DVDAudio Playback Mode” (page 32)).
DVD Commercial Audio discs can be used.
DVD-R/DVD-RW discs recorded in DVD-VR
mode can be used.
If the IVA-D100 is not installed correctly, the driver will
be able to watch the DVD/TV/Video while driving the
vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
To display the DVD mode screen
To watch a video source, your vehicle must be parked with the ignition
key in the ACC or ON position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD mode, as
long as the car's ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display the DVD mode
screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
Video-CD discs can be used.
18-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 19 Tuesday, February 14, 2006 4:10 PM
•
•
•
•
Caution
Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
If you switch the power or Ignition Key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
• Play Position Memory Function
Even if you turn power off or switch the Ignition Key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
1
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
Direct Menu Operations
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
Menu Operations
1 Touch [KEY].
The menu operation mode will be displayed.
Press SOURCE/POWER.
The source selection screen is displayed.
2
Touch [
] of DVD PLAYER.
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see “Switching Display Modes” on page 26.
To eject the disc
Press
Touch [MENU RTN] to return
to the previous display.
(Operation may not be
possible, depending on the
disc.)
2 Select a desired menu item by touching [ ], [
[ ].
3 Touch [ENT] to confirm the selected item.
], [
] or
.
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• If the disc does not eject, press and hold for at least 2 seconds.
• DO NOT insert discs containing maps for the navigation system.
Doing so could result in damage.
• Refer also to “DVD Setup” (pages 28 to 32).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• To return to the previous screen during video CD playback, touch
[RTN] after touching [PAGE1/2] of the function guide. However, the
function may vary depending on the disc.
• If the disc is left in the unit after pressing , the disc is automatically
pulled back into the unit and stopped. In this case, start playback by
touching [ / ] or eject again and remove the disc within 15
seconds.
19-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 20 Tuesday, February 14, 2006 4:10 PM
Numeric Keypad Input Operations
Displaying the Menu Operation Mode
Screen
1
Touch [PAGE1/2]* on the DVD mode main screen.
The function guide changes.
* The display differs, depending on the disc (mode).
2
Touch [MENU CONT].
The menu operation mode screen appears.
1 Touch [KEY].
The menu operation mode appears.
2 Touch [KEY] again.
The numeric keypad input mode screen appears.
• For further operation, see “If a menu screen appears” on pages 19
and 20.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
Searching by Program
The numeric
keypad input
screen closes
when the area
is touched
while
displayed.
1
Touch [TOP MENU] on the DVD mode main screen
while playing a DVD-VR disc.
The program search list screen is displayed.
2
Numeric Keypad Input Operations
When PBC is turned OFF, the menu screen is not displayed. Turn it ON
to display the screen (See “Setting the Video CD Play Mode” on
page 32).
1 Touch [PAGE1/2] in the video CD mode to change the
function guide.
2 Touch [10KEY].
The numeric keypad is displayed.
3 Touch and input a desired number.
4 Touch [ENT] to confirm.
] of the program you want to play.
The selected program is played back, and then returns to
the DVD mode main screen.
Touch [RTN] to close the numeric
keypad input screen.
3 Touch a desired number.
4 Touch [ENT] on the numeric keypad mode screen to
confirm your selection.
Touch [
Searching by Playlist
1
Touch [MENU] on the DVD mode main screen while
playing DVD-VR disc.
The playlist search list screen is displayed.
2
Touch [
] of the playlist you want to play.
The selected playlist is played back, and then returns to the
DVD mode main screen.
• Only discs containing a Playlist can be operated.
Stopping Playback (PRE STOP)
Displaying the Top Menu Screen
Press the stop button during playback to stop playback. That position is
stored in the memory.
When a DVD contains two or more titles, the top menu screen appears.
Touch [TOP MENU] on the DVD mode main screen.
The top menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
pages 19 and 20.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
Displaying the Menu Screen
1
Touch [ ] once during playback.
“PRE STOP” is displayed.
2
Touch [
/
] in the PRE STOP mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
With a DVD having two or more menus, a menu screen will appear for
the programs available, in addition to the main programs.
Touch [MENU] on the DVD mode main screen.
The menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
pages 19 and 20.
20-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 21 Tuesday, February 14, 2006 4:10 PM
Stopping Playback
Supplementary explanation
Touch [ ] twice or touch and hold [ ] for at least 2
seconds during playback.
“STOP” is displayed, and playback stops.
• Playback starts from the beginning when [
playback is stopped.
/
] is touched while
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
Video CD, DVD Audio and music CDs.
“Groups” associate a track (one song) with other tracks
stored on a DVD-Audio. Group playback differs, depending
on the disc.
“Playlists” specify a range of images and their playback
order.
• Only discs containing a playlist can be used.
Fast-forwarding/Fast-reversing
Playing Still Frames (Pausing)
DVD-Video, DVD-VR, Video-CD, DVD-Audio (VCAP
mode)*:
1
During playback, touch and hold [
reverse) or [
] (fast-forward).
] (Fast-
When touched and held for more than 1 second, the disc is
forwarded/reversed at double speed. When held for 5 more
seconds or longer, the disc is forwarded/reversed at 8 times
the normal speed. When held for 10 seconds or longer, the
disc is forwarded/reversed at 21 times the normal speed.
DVD-Audio (VOFF mode)*:
1
2
During playback, touch and hold [
reverse) or [
] (fast-forward).
Stop touching [
playback.
] or [
] (Fast-
] to return to normal
* When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 32).
• No sound is played back during fast-forwarding/fast-reversing.
• For DVDs and video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
• Operation may not be possible, depending on the disc.
1
2
During playback, touch [
Touch [
/
/
].
] to resume playback.
• No sound is played during the still frame mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
Forward/reverse frame-by-frame
Playback
1
In the pause mode, touch [
] or [
].
The picture advances or reverses by one frame each time
the button is touched.
2
Touch [
/
] to return to normal mode.
• No sound is output during forward/reverse frame-by-frame playback.
• Reverse frame-by-frame cannot be carried out on the DVD-VR and
video CD.
Slow Motion Playback
Finding the Beginnings of Chapters or
Tracks
During playback, touch [
] or [
1
].
The chapter/track switches each time the button is touched, and
playback of the selected chapter/track starts.
:Touch this to start playback from the beginning of the
following chapter or track.
:Touch this to start playback from the beginning of the
current chapter or track.
• Some DVDs do not have chapters.
• Be sure to turn PBC off before starting the search (see “Setting the
Video CD Play Mode” on page 32).
2
When [
] or [
] is touched and held while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion
speed switches to 1/2 the normal speed.
Stop touching [
] or [
[ / ] to play back.
] to pause, and touch
• No sound is played during slow motion playback.
• Reverse slow motion playback is not available on the DVD-VR and
video CD.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc to
disc.
21-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 22 Tuesday, February 14, 2006 4:10 PM
Selecting Program (SKIP)
1
DVD Audio
1
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
Touch [PAGE1/3] twice while playing a program of a
DVD-VR disc.
VCAP mode*1:
The PROGRAM function guide is displayed.
2
Touch [ ] or [ ] of PROGRAM* to select the
desired program.
REPEAT
The track is played repeatedly.
* To switch [ ] or [ ] of PLAYLIST in the function guide
display to [ ] or [ ] of PROGRAM, play back the program.
For details, refer to “Searching by Program” (page 20).
REPEAT GROUP
The group is played repeatedly.
REPEAT OFF
The playback returns to normal
mode.
Selecting Playlist (SKIP)
1
VOFF mode*1:
RPT
Touch [PAGE1/3] twice while playing a playlist of a
DVD-VR disc.
RPT GROUP
The PLAYLIST function guide is displayed.
2
(OFF)
Touch [ ] or [ ] of PLAYLIST* to select the
desired playlist.
* To switch [ ] or [ ] of PROGRAM in the function guide
display to [ ] or [ ] of PLAYLIST, play back the playlist.
For details, refer to “Searching by Playlist” (page 20).
The track is played repeatedly.
The group is played repeatedly.
The disc is played repeatedly.
*1 When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 32).
DVD-VR
1
Repeat Playback
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
Use this function to play the disc’s titles, chapters or tracks, etc.,
repeatedly.
DVD Video
1
Touch [
] on the main unit.
The repeat mode switches every time the button is touched.
The chapter is played repeatedly.
The Program mode*2:
REPEAT
The chapter is played
repeatedly.
REPEAT PROGRAM
The program is played
repeatedly.
REPEAT DISC
All programs are played
repeatedly.
The Playlist mode*2:
The title is played repeatedly.
The playback returns to normal mode.
• Display may vary depending on the connected devices.
• The REPEAT mode is always turned off when [
] is touched and
held for at least 2 seconds.
Video CD
1
During playback, touch [
] on the main unit.
The repeat mode switches every time the button is touched.
REPEAT
The chapter is played
repeatedly.
REPEAT PLAYLIST
The playlist is played
repeatedly.
REPEAT DISC
All playlists are played
repeatedly.
*2 To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “Searching by Program” or “Searching by Playlist”
(page 20).
• Only discs containing a Playlist can be displayed.
The track is played repeatedly.
The disc is played repeatedly.
*
Playback does not repeat.
* Displayed only in the changer mode.
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See “Setting the Video CD Play Mode” on page 32.
• For some discs it is not possible to switch the repeat mode.
22-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 23 Tuesday, February 14, 2006 4:10 PM
Searching by Title/Group/Program/
playlist Number
Use this function to easily find positions on the DVD using the DVD’s
titles, Groups, Programs or playlists.
1
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
2
Enter a desired title, Group, Program or playlist by
touching its title, Group, Program or playlist number.
See page 20 for operation of the numeric keypad.
4
Confirm your selection by touching [ENT].
Playback will start from the title number selected.
• To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “Searching by Program” or “Searching by Playlist”
(page 20).
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of PRE STOP.
• Some disc may not accept any operation.
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
Touch [10KEY].
The numeric keypad input mode screen appears.
3
During playback, touch [PAGE1/2]*.
The function guide changes.
* The display differs, depending on the disc (mode).
Touch [PAGE1/2]* while playback is stopped.
The function guide appears.
* The display differs, depending on the disc (mode).
2
Switching the Angle
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
• To playback a DVD-Audio disc, set “VCAP” or “VIDEO” in
“Setting the DVD-Audio Playback Mode” (page 32).
Scroll to Move the Page Forward or Back
“Page” is a still image stored on a DVD-Audio disc.
1
Touch [PAGE1/3] twice while playing a DVD-Audio
disc in VCAP mode*.
* Playing back a DVD-Audio disc when “VCAP” is set in
“Setting the DVD-Audio Playback Mode” (page 32).
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Touch [PAGE1/2]* in any mode other than stop
mode.
The function guide will appear.
* The display differs, depending on the disc (mode).
2
Touch and enter the chapter or track number you
want to play.
See page 20 for operation of the numeric keypad.
4
Touch PAGE [
] or [
].
The display switches.
Touch and hold to display the home page.
• For DVD-Audio discs without Pages, depending on the DVD-Audio
disc, the "Page" function may not be operable if images are in slide
show form.
Switching the Audio Tracks
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
2
Touch [ENT] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
• Be sure to turn PBC off before starting the search (See “Setting the
Video CD Play Mode” on page 32).
DVDs can have up to 8 different audio tracks. These alternate tracks can
be switched during playback.
1
During playback, touch [PAGE1/2]*1.
2
Touch [AUDIO].
*1 The display differs, depending on the disc (mode).
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
23-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 24 Tuesday, February 14, 2006 4:10 PM
Video CDs or DVD-VR with multiplex audio
1
During playback, touch [PAGE1/2]*2.
The function guide changes.
*2 Touch [PAGE1/3] while playing a DVD-VR disc.
2
Touch [AUDIO]*3.
The left and right channels will be output as shown below,
each time the button is touched.
*3 Touch [AUDIO] for at least 2 seconds to switch while playing a
DVD-VR disc.
AUDIO LR
AUDIO LL
AUDIO RR
AUDIO LR
Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD or of the currently
playing video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
Switching the Subtitles (Subtitle
Language)
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
1
During playback, touch [PAGE1/2]*.
The function guide changes.
* The display differs, depending on the disc (mode).
2
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc’s default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
OFF. However, the subtitle language may differ depending on the
disc.
• Switches the subtitles ON/OFF while playing a DVD-VR disc.
Switching from the disc menu
For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
2
Touch [MENU] or [TOP MENU] to display the
menu.
Select an item to confirm it.
See “If a menu screen appears” on pages 19-20.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 32).
24-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 25 Tuesday, February 14, 2006 4:10 PM
Other Useful
Features
• The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass band width settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
Setting the treble level:
You can emphasize the treble frequency.
Touch [
Adjusting the Audio
1
2
] or [
] of LEVEL to select the desired treble level.
Setting range: -7 to +7
Setting the Treble Center Frequency:
Press SETUP.
The displayed Treble frequency is emphasized.
The SETUP selection screen is displayed.
Touch [ ] or [
frequency.
Touch [
] of AUDIO MODE or press and hold the
Rotary encoder for at least 2 seconds on the unit.
The display changes to the AUDIO Adjustment screen.
Display Example for Audio Adjustment Screen
] of FREQ. to select the desired bass center
Setting range:7.5kHz, 10kHz, 12.5kHz, 15kHz
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
Adjusting the Balance
Touch [ ] or [ ] of BALANCE to adjust the sound
volume of the left and right speakers.
Setting range: L15 to R15
Adjusting the Fader
Touch [ ] or [ ] of FADER to adjust the volume of the
front and rear speakers.
Scrolls the page list up or down.
Scrolls the list item by item.
Setting range: F15 to R15
Touching and holding will scroll continuously.
Setting the Loudness:
GlideTouch bar display
Loudness introduces a special low- and high-frequency
emphasis at low listening levels. This compensates for
the ear’s decreased sensitivity to bass and treble sound.
For operation, refer to “About the GlideTouch bar”
(page 12).
• Touching [RTN] will return to the previous display.
• When an external audio processor is connected, BASS, TREBLE or
LOUDNESS is not displayed.
Adjusting Bass/Treble
You can change the bass or treble frequency emphasis
to create your own tonal preference.
Touch [
] to display the Bass or Treble adjusting screen.
Touch [
] or [
] of LOUDNESS to set to ON or OFF.
Adjusting the Subwoofer Level
Touch [ ] or [ ] of SUBW. LV to adjust the subwoofer
output.
Setting range: 0 to 15
Setting the Bass level:
• The level adjustment becomes available when ON is set in
“Subwoofer On and Off” (page 36).
You can emphasize or weaken the bass frequency.
Adjusting NAV. LEVEL
Touch [
] or [
] of LEVEL to select the desired bass level.
Setting range:-7 to +10
Setting the Bass Center Frequency:
The displayed bass frequency is emphasized
Touch [ ] or [
frequency.
] of FREQ. to select the desired bass center
Touch [ ] or [ ] of NAV. MIX LV to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• This adjustment becomes available when NAV.MIX is turned on in
“Setting the Navigation Interruption” (page 35).
• The setting navigation interruption is not displayed if an external
audio processor not compatible with NAV.MIX is connected.
Setting range: 60Hz, 80Hz, 100Hz, 120Hz
Turning defeat ON or OFF
Setting the Bass Bandwidth (Q-Factor):
Changes the boosted bass bandwidth to wide or narrow.
A wide setting will boost a wide range of frequencies
above and below the center frequency. A narrower
setting will boost only frequencies near the center
frequency.
Touch [ ] or [ ] of DEFEAT to set to ON or OFF.
If you set defeat to ON, adjusted bass/treble values return to
their initial settings.
Touch [ ] or [ ] of Q (BASS BANDWIDTH) to select the desired
bass bandwidth.
Setting range: 1.25, 1.00, 0.75, 0.5
25-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 26 Tuesday, February 14, 2006 4:10 PM
Search Function
1
Internal MP3/WMA Player/external MP3-compatible DVD
Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
].
([
] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
Touch [ ] on the function guide while in the CD or
MP3/WMA mode.
Search list screen is displayed.
• Touch [
Select a desired track or folder.
Touch [
] for direct playback.
When a hierarchical list is prepared, [
] will be
displayed. Touch [
] to display the respective
hierarchy list screens.
Display Example for Search Screen
] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
Rear Selection Function
While listening to the radio or other audio source, at the same time,
pictures in a disc inserted in the IVA-D100 can be enjoyed in the rear
monitor. However, only pictures are output, not sound.
1
Press SETUP.
The SETUP selection screen is displayed.
2
Touch [
] of REAR SELECT.
Rear Select display appears.
• This function cannot be used when “Setting the Picture Output”
(page 36) is set to OFF in the SYSTEM SETUP.
Select directly by touching [ ], and its Track (or folder/
file) is played back.
Scrolls the page list up or down.
(Displayed when the list items cannot be displayed entirely.)
Scrolls the list item by item.
3
Touch [ ] of the desired source such as visual
(auxiliary input, built-in DVD, etc.) to select.
• Touch [OFF] to cancel the rear entertainment function.
• When the “Setting the AUX Mode” (page 35) is set to OFF, the
auxiliary source is not displayed.
Touching and holding will scroll continuously.
(Displayed when the list items cannot be displayed entirely.)
GlideTouch bar display
For operation, refer to “About the GlideTouch bar”
(page 12).
(Displayed when the list items cannot be displayed entirely.)
Touch [RTN] to return to the previous list screen.
] is displayed if there is a hierarchical list.
[
• The search function does not work on the DVD, video CD or CD
changer.
• A folder list is displayed only during MP3/WMA playback when the
DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Switching Display Modes
After carrying out the steps 1 to 3 of “To display the DVD mode
Screen” explained on page 28, perform the operation described below.
While your vehicle is parked, touch [WIDE] on the visual
source screen or press BAND on the unit.
Each touch changes the display modes as follows:
MODE 1
(WIDE)
MODE 2
(CINEMA)
MODE 3
(NORMAL)
MODE 1
(WIDE)
Internal CD player mode
1 The track list* screen appears.
* If the CD is text compatible only.
2 Touch [ ] of a desired track text*.
The selected track will be played back.
• “TRACK” is displayed in the track text list if there is no text
on the disc.
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
26-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 27 Tuesday, February 14, 2006 4:10 PM
Blackout Mode On and Off
When Blackout mode is turned on, the monitor display will turn off to
reduce power consumption.
This additional power enhances the sound quality.
1
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16 : 9 ratio.
2
] of OFF.
The backlit-display portion goes out.
The guide indicator blinks slowly.
3
In Mode 3 (Normal), the monitor displays a normal picture at the
center of the screen with a vertical black band at each side.
Touch [
Touch [ ] of OFF again to cancel the display
backlight.
• To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 36).
• If any button on the unit is pressed during Blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
• While the backlighting is turned off, the guide indicator blinks during
navigation voice interruption.
Switching the Visual Source Only
(Simultaneous Function)
Setting rear Camera Interruption
You can watch the video portion of another source while listening to the
current source.
When the rear camera is connected, rear pictures are output on the
screen.
• After carrying out the steps 1 to 3 of “To display the DVD mode
Screen” explained on page 28, perform the operation described
below.
1
Press VISUAL on the unit.
The VISUAL selection screen appears.
2
Touch [
] of a desired visual source.
The visual source is switched to the selected one.
The visual indicator lights up.
Cancelling the Simultaneous Function
1
2
Press VISUAL.
Touch [
1
2
Select CAMERA in “Setting the AUX Mode”
(page 35).
Press VISUAL on the unit.
The VISUAL selection screen is displayed.
3
Touch [
] of CAMERA.
Rear picture is output even if you do not engage the shift
lever in reverse (R).
4
To cancel the setting, press VISUAL on the unit, and
touch [ ] of NORMAL.
• By shifting to reverse (R),the rear pictures are output. This function is
effective when the reverse wire is properly connected.
] of NORMAL.
The simultaneous function is canceled.
The visual indicator goes out.
• To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 36).
• If a DVD player is connected, you can receive the DVD picture.
DVD changer (DHA-S680) is connected:
Press and hold V.OUT on the remote control supplied with the DVD
player or DVD changer for more than 2 seconds. The picture of the
DVD will be output.
The DVA-5210 is connected:
Press V.OUT on the remote control (included with the DVA-5210) to
output DVD picture.
• The simultaneous function cannot be used when the Audio source is
in the navigation mode.
When NAV. is set in “Setting the VISUAL Button” (page 36), only the
navigation screen can be recalled.
• When the “Setting the AUX Mode” (page 35) is set to OFF, the
auxiliary source is not displayed.
27-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 28 Tuesday, February 14, 2006 4:10 PM
Monitor Setting
Monitor Setting Operation
Following Steps 1 to 4 describe the common procedures for
operating the MONITOR setting function. For details of the
setting function items, refer to descriptions of respective items.
1
Press SETUP.
The SETUP selection screen is displayed.
2
Touch [
Setup
DVD Setup
DVD Setup Operation
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
] of MONITOR.
The MONITOR screen appears.
3
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
TILT / SLIDE / OPEN / CLOSE
4
Touch [RTN] to return to the previous screen.
Adjusting the Monitor Angle
Adjust the monitor's angle (between 40 and 105 degrees) for optimum
visibility.
Setting item: TILT
Setting range: 10 adjustable angles are available.
• If the monitor touches an obstacle, remove the obstacle.
• The screen color will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle's battery power is low, the screen may
blink when the screen angle is changed. This is not a malfunction.
Selecting the Monitor Position
The monitor can be set in 2 positions.
Setting item: SLIDE
Setting content: BACK / FRONT
BACK: Slides the display backwards.
FRONT: Slides the display forwards.
• If the monitor is forcibly pushed or pulled, you may not be able to set
the monitor angle or position. In this case, press OPEN for more than
2 seconds to close the monitor once, and then open the monitor
again.
Setting Automatic Opening/Closing of the
Monitor
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of “To
display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
The DVD Setup operation can be carried out after removing the
disc from the unit.
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
1
Press SETUP.
The SETUP selection screen is displayed.
2
Touch [
] of OTHER SETUP.
The OTHER SETUP screen appears.
3
Touch [
] of DVD SETUP.
The DVD setup screen appears.
4
Touch [ ] or [ ], etc., of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / PBC
Setting item: OPEN / CLOSE
Setting content: MANUAL / FULL / CLOSE
MANUAL: The monitor is manually opened or closed by
pressing OPEN.
FULL:
The monitor automatically opens and closes when
the ignition key is turned to the “ACC” or “ON/OFF”
position.
CLOSE: The monitor automatically closes when the ignition
key is turned OFF.
28-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 29 Tuesday, February 14, 2006 4:10 PM
Display example for DVD setup screen
Setting of the Menu Language
Set the language used for the menus (title menu, etc.).
Setting item: MENU LANGUAGE
Setting contents: AUTO / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “AUTO” is selected, the primary menu language among the
recorded ones is played.
Setting of the Audio Language
Set the audio language produced from the speakers.
Touch [CODE] to display the numeric keypad screen.
Touch [ ] or [ ] to set a desired language.
Scrolls the page list up or down.
Scrolls the list item by item.
Touching and holding will scroll continuously.
GlideTouch bar display
For operation, refer to “About the GlideTouch bar”
(page 12).
Setting item: AUDIO LANGUAGE
Setting contents: AUTO / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “AUTO” is selected, the primary audio language among the
recorded ones is played.
Setting of the Subtitle Language
Set the language of the subtitles displayed on the screen.
Setting item: SUBT. LANGUAGE
Setting contents: AUTO / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “AUTO” is selected, the primary subtitle language among the
recorded ones is played.
To play in a language other than those displayed
1 Touch [CODE].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
As for the language number, refer to “List of Language
Codes” (page 60).
3 Touch [ENT] to memorize the number.
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
5
Touch [RTN] to return to the previous screen.
• Immediately after changing the settings of DVD mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (The language setting is not
effective on some discs. If not, the default language is set from the
factory.)
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 23).
• If the disc does not include the selected language, the disc’s default
language is set.
Changing the Country Code Setting
Set the country number of which you want to set the rating level
(Parental lock).
Setting item: COUNTRY CODE
Setting content: AUTO / OTHER
AUTO: The primary country code among the recorded ones is played.
OTHER: Touching [CODE] will display the currently selected country
code in the input space.
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are cleared even when the vehicle’s battery is disconnected.
1 Touch [CODE] of COUNTRY CODE.
2 Touch [ALL DEL] or [BS].
Delete the displayed country number.
3 Touch the 4-digit country code.
As for the country number, refer to “List of Country
Codes” (pages 61 and 62).
4 Touch [ENT] to memorize the code.
29-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 30 Tuesday, February 14, 2006 4:10 PM
Setting the Rating Level (Parental Lock)
Changing the Digital Output Setting
This function can help restrict the viewing of movies to children of
appropriate age levels only.
Use the following procedure to set the digital audio signal output from
the IVA-D100.
Setting item: PARENTAL
Setting content: INPUT
Setting item: DIGITAL OUT
Setting contents: BITSTREAM / LPCM
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• If you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
BITSTREAM: The digital output is switched automatically
according to the type of audio signals being
played.
Be sure to select “BITSTREAM” when you want to
connect a digital audio processor and play Dolby
Digital audio. “BITSTREAM” is the factory setting.
LPCM:
The audio signals recorded on the disc are
converted to 48 kHz/16 bit (for DVDs) or 44.1 kHz
(for video CDs and CDs) linear PCM audio signals
for output.
1 Touch [INPUT].
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111.
Input number are displayed as “*”.
3 Touch [ENT] to memorize the number.
The PARENTAL screen appears.
Set the rating level of PARENTAL
4 Touch [ ] or [ ] of PARENTAL to turn on.
5 Touch [ ] or [ ] of PARENTAL LEVEL to select the rating
level (1 to 8).
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch [RTN] to return to the previous screen.
Changing the password
4 Touch [INPUT] of PASSWORD CHANGE.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password
• Keep a note of the number somewhere safe in case you should
forget it.
6 Touch [ENT] to memorize the number.
7 Touch [RTN] to return to the previous screen.
Changing the rating level temporarily
Some discs may request that you change the rating level set in
the default settings during playback. In this case, the message
appears on the monitor screen “PARENTAL LEVEL CHANGE OK?
[YES] [NO].”
If this screen appears, change the level as follows:
• To change parental level and play, touch [YES].
When [YES] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in “Setting the Rating Level
(Parental Lock)” you set, then touch [ENT].
• To play without changing the parental level, touch [NO].
(When [NO] is touched, playback will be at the parental level set
in “Setting the Rating Level (Parental Lock).”)
30-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 31 Tuesday, February 14, 2006 4:10 PM
Audio output/Optical digital audio output
Disc
Audio recording format
Digital output setting
(DVD SETUP)
Optical digital audio
output
Analog audio output
(Ai-NET, RCA output)
Format
Fs
Q
LPCM
(CD-DA,
DVD-V, DVDA, DVD-VR)
44.1/176.4kHz
16/20/24bit
BITSTREAM or LPCM
44.1kHz, 16bit, LPCM
2ch (2ch Downmix)*
OK
48/96/192kHz
16/20/24bit
BITSTREAM or LPCM
48kHz, 16bit, LPCM 2ch
(2ch Downmix)*
OK
PPCM
(DVD-A)
44.1/88.2/
176.4kHz
16/20/24bit
BITSTREAM or LPCM
Not output
OK
48/96/192kHz
16/20/24bit
Dolby Digital
(-EX)
(DVD-V, DVDA, DVD-VR)
48kHz
16/18/20bit
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 7.1ch)*
OK
DTS (-ES)
(CD-DA,
DVD-V, DVDA)
44.1kHz
LPCM
44.1kHz, 16bit Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 6.1ch)*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 6.1ch)*
OK
LPCM
44.1kHz, 16bit,
Decoded 2ch*
OK
BITSTREAM
Bit stream*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 5.1ch)*
OK
LPCM
44.1kHz, 16bit,
Decoded 2ch*
OK
BITSTREAM
Bit stream*
OK
48/96kHz
MPEG1Layer
II
(VCD, DVD-V,
DVD-A, DVDVR)
MPEG2Layer
II
(DVD-V, DVDA, DVD-VR)
MPEG1/2/
2.5Layer III
(MP3, WMA)
44.1kHz
48kHz
44.1kHz
16/20/24bit
16/20/24bit
16bit
16bit
16bit
48kHz
16bit
LPCM
48kHz, 16bit, Decoded
2ch (2chDownmix)*
OK
BITSTREAM
Bit stream (Max 5.1ch)*
OK
32kHz
16bit
BITSTREAM or LPCM
32kHz, 16bit, Decoded
2ch
OK
44.1kHz
16bit
BITSTREAM or LPCM
44.1kHz, 16bit,
Decoded 2ch
OK
48kHz
16bit
BITSTREAM or LPCM
48kHz, 16bit, Decoded
2ch
OK
* Not output when playing back a DVD-Audio.
31-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 32 Tuesday, February 14, 2006 4:10 PM
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND / STEREO
SURROUND: Surround compatible Downmix
STEREO:
Stereo Downmix
Setting the TV Screen Setting
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-D100.
If the rear monitor is not connected, the screen setting is 16:9.
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16 : 9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
Setting of the Bonus Code
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc., of the disc, for the
code number.
Setting item: BONUS CODE
Setting contents: INPUT
1
Touch [INPUT].
The 10 key input screen is displayed.
2
3
Input the 4 digit code number given on the jacket of
the disc, etc.
Touch [ENT] to memorize the number.
• If the code number of the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display. If a new code number is input, this code number will
be replaced.
Setting the DVD-Audio Playback Mode
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A SETUP
Setting contents: VIDEO / VCAP / VOFF
VIDEO:
VCAP:
VOFF:
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16 : 9 size
movie).
Only DVD Video is played back if the
disc contains DVD Video and Audio.
DVD Audio is played back with Video.
DVD Audio is played back without Video.
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled video CD, you
can choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: ON / OFF
ON:
OFF:
The PBC menu is displayed.
The PBC menu is not displayed.
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
32-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 33 Tuesday, February 14, 2006 4:10 PM
GENERAL Setup
Displaying the Time
The clock indication on the monitor display is turned on or off
respectively.
General Setup Operation
To display the General mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General mode, as long as the car's ignition has not been turned
off. It is not necessary to repeat the above procedure (1 through
3), of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of GENERAL Setup. Refer to each section for
details.
1
Press SETUP.
The SETUP selection screen is displayed.
2
Touch [
] of OTHER SETUP.
The OTHER SETUP screen appears.
3
Touch [
] of GENERAL SETUP.
The GENERAL setup screen appears.
4
Touch [ ] or [ ], etc., of the desired item to change
its setting.
Setting items:
CLOCK / CLOCK ADJUST / DAYLIGHT SAVING /
DEMONSTRATION / BEEP / AUTO SCROLL / ADF* /
PLAY MODE / LANGUAGE SELECT / LED DIMMER LEVEL
* Displayed only when XM Satellite Radio Receiver is connected.
5
Setting item: CLOCK
Setting content: OFF / ON
Setting the Time
Setting item: CLOCK ADJUST
Further setting items : HOUR / MINUTE / TIME ADJUST
Setting content: 1-12 / 0-59 / RESET
HOUR:
Adjust the hour.
MINUTE: Adjust the minute.
RESET: If the clock shows less than 30 minutes past, the
minute will be “0”; more than 30, the hour advances.
• The clock-adjusting mode is canceled when the power is turned off,
when [RTN] is touched.
Setting Daylight Saving Time
Setting item: DAYLIGHT SAVING
Setting content: OFF / ON
Place the Summer Time mode ON. The time advances by
one hour.
OFF: Return to the ordinary time.
ON:
Demonstration Function
This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
Setting item: DEMONSTRATION
Setting content: OFF / ON
Turns on the demonstration mode to show the basic
operations.
OFF: Turns off the demonstration mode.
ON:
• The demonstration operation is automatically repeated until the
function is turned off.
Sound (Beep) Guide Function
Setting item: BEEP
Setting content: OFF / ON
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button on the unit is
pressed.
Touch [RTN] to return to the previous screen.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
• A beep always sounds when opening or closing the monitor,
regardless of this setting.
33-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 34 Tuesday, February 14, 2006 4:10 PM
Setting the Scroll
SYSTEM Setup
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: AUTO SCROLL
Setting content: OFF / ON
Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed (only
when the scroll display cannot appear entirely).
System Setup Operation
ON:
To display the System mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Brake to bring your vehicle to a complete stop at a
safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• Scroll display of the song, artist and album name is enabled when
iPod is connected.
• Short/Long Station name, Song, Artist, and album name scrolling are
displayed in HD Radio mode.
Setting the Auxiliary Data Field Display
This display can be used only when the optional XM Satellite Radio
Receiver is connected.
Setting item: ADF
Setting content: OFF / ON
ON: The Auxiliary Data Field is displayed in the XM mode.
OFF: The Auxiliary Data Field is not displayed.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the System mode screen.”
Playing MP3/WMA Data
When using discs containing both audio data and MP3/WMA data.
Setting item: PLAY MODE
Setting content: CD / CMPM
Plays only the audio data on discs containing both audio
data and MP3/WMA data.
CMPM: Plays only the MP3/WMA files on discs containing both
audio data and MP3/WMA data.
CD:
• If a disc is inserted, remove it from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
Changing the Russian Font
The following steps 1 to 5 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
1
The SETUP selection screen is displayed.
2
MODE1: Usual font display (ISO8859-1)
MODE2: Russian font display (WINDOWS-1251)
3
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
• The adjustment is available when ON or AUTO is set in “Setting the
Brightness of the Backlighting” (page 37).
• The adjusted brightness is reflected in the button lighting and guide
indicator. However, if the level is set to “-2”, the guide indicator
turns off.
] of OTHER SETUP.
Touch [
] of SYSTEM SETUP.
The SYSTEM setup screen appears.
4
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
IN INT. MUTE / NAV. IN / NAV. MIX*1 / AUX IN /
AUX IN LEVEL*2 / AUX IN SIGNAL*2 / AUX OUT /
VISUAL KEY / SUBW. OUT*3 / OPTICAL OUT
*1 When ON is set in “Setting the Navigation Mode” (page 35),
the item is displayed.
*2 When ON is set in “Setting the AUX Mode” (page 35), these
items are displayed.
*3 Not displayed when an extarnal audio processor is connected.
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Touch [
The OTHER SETUP screen appears.
Two type of font can be selected.
Setting item: LANGUAGE SELECT
Setting content: MODE1 / MODE2
Press SETUP.
5
Touch [RTN] to return to the previous screen.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
34-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 35 Tuesday, February 14, 2006 4:10 PM
Setting the External Device Interrupt Mode
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D100, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN INT. MUTE
Setting content: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Setting the Navigation Interruption
With an Alpine navigation system connected to the IVA-D100, the voice
guidance of the navigation system will be mixed with the radio or CD
play.
Setting item: NAV. MIX
Setting content: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
To adjust the navigation interruption volume level, the adjustment
for NAV. LEVEL can be performed in “Adjusting the Audio” on
page 25 after setting to ON.
• The audio volume during the navigation guide can be set by
adjusting the audio volume while the navigation guide continues.
When the navigation guide finishes, the previous audio volume and
the previous screen are restored. For exception, if the navigation cuts
in when the audio volume is lower than the setting level, the audio
volume during the navigation guide is reset the current listening
volume. (When the navigation guide cuts in, the audio volume does
not increase.)
• This setting is effective when NAV.IN of SYSTEM list screen is ON.
Setting the AUX Mode
Setting item: AUX IN
Setting content: OFF / ON / CAMERA / VCR / GAME / TV /
EXT. DVD / EXTPLYR
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• If "CAMERA" is selected, CAMERA mode name is displayed on the
VISUAL selection screen. When the rear camera is selected even if
the shift lever is not set to reverse (R), the rear picture is output by
selecting CAMERA.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the source selection screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected name is displayed on the VISUAL and REAR selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
However “EXTPLYR” cannot be currently used, but will become
available when the system is expanded in the future.
• When the AUX name other than “CAMERA” is selected on the
Source Select screen, “CAMERA” cannot be selected. If an other
source (Radio, etc.) is selected on the Source Select screen,
“CAMERA” can be selected.
Adjusting the External Input Audio Level
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Switching the Visual Input Signal
After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN SIGNAL
Setting content: NTSC / PAL
• The video input type can be changed.
35-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 36 Tuesday, February 14, 2006 4:10 PM
Setting the Picture Output
DISPLAY Setup
Outputs the picture of the source selected on the IVA-D100 connected
to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
The "REAR SELECT" item is displayed on the SETUP
select screen.
Touch [
] of REAR SELECT to change to the REAR
select screen, then touch [ ] of the desired source. The
selected source picture is output on the rear monitor.
OFF: The "REAR SELECT" item is not displayed on the SETUP
select screen.
Display Setup Operation
ON:
To display the Display mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
Setting the VISUAL Button
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
Switches directly to the navigation screen by pressing
VISUAL. (Only when an Alpine optional RGB
Navigation is connected.)
VISUAL: Recalls the VISUAL Select screen by pressing
VISUAL.
NAV.:
Subwoofer On and Off
Setting item: SUBW. OUT
Setting contents: ON / OFF
ON: Subwoofer output is on.
OFF: Subwoofer output is off.
Setting the Digital Output
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Display mode operation has been
released. Engaging the parking brake can reactivate the Display
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To display the Display mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Display mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
1
Press SETUP.
The SETUP selection screen is displayed.
2
Touch [
] of OTHER SETUP.
The OTHER SETUP screen appears.
3
Touch [
] of DISPLAY SETUP.
The DISPLAY setup screen appears.
4
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Setting items:
DIMMER / DIMMER LOW LEVEL / BACKGROUND / AUTO
BACKGROUND / BASE COLOR / PULSETOUCH /
SCREEN ALIGNMENT
5
Touch [RTN] to return to the previous screen.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
36-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 37 Tuesday, February 14, 2006 4:10 PM
Setting the Brightness of the Backlighting
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: DIMMER
Setting content: OFF / ON / AUTO
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
ON:
Keep the background illumination of the monitor dark.
AUTO: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
OFF:
• When ON or AUTO is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 34).
Adjusting the Minimum Level of Backlight
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: DIMMER LOW LEVEL
Setting content: -15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
Switching Background Textures
You have a choice of background textures you can set.
Setting item: BACKGROUND
Setting content: MODE1 / MODE2
• This operation can be carried out after removing the disc from the
unit or when playback of the disc has stopped.
• Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 39) are recalled.
• When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
• When an error message is displayed (ERROR, HI-TEMP, etc.),
background textures selected by this setting cannot be displayed on
the unit.
Switching the Font Background Color
You can choose from 5 different colors for the font background.
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
Turning the Touch Panel Vibration ON or
OFF
You can turn the touch panel’s vibration ON or OFF during operation.
Setting item: PULSETOUCH
Setting content: OFF / ON
OFF:
ON:
Turns off vibration during operation.
Turns on vibration during operation.
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content: / RESET
1 Touch [
] of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
• If you have touched a location other than the
mark, touch
[RESET] to restore the adjustment screen to the initial setting.
• If you touch [RTN] on the adjustment screen, no adjustment is done
and the DISPLAY setup screen is restored.
Setting Automatic Background Textures
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1
MODE2
OFF: Turn off the Auto Background Texture Scroll mode.
ON:
• Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 39) are recalled.
37-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 38 Tuesday, February 14, 2006 4:10 PM
Selecting the VISUAL EQ Mode (Maker’s
setting)
i-Personalize™
You can select a mode suitable for the subject image.
VISUAL EQ™
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
Visual EQ Setting Operation
To display the i-Personalize mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the i-Personalize mode operation has
been released. Engaging the parking brake can reactivate the iPersonalize mode, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above procedure (1
through 3), of “To display the i-Personalize mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the i-Personalize mode screen.”
The following steps 1 to 6 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details
1
Touch [
Touch [
BRIGHT
COLOR*
USER PRESET*
TINT*
CONTRAST
* The setting is available in the visual source mode. (except navigation
screen)
5
6
You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.
Setting item: COLOR
Setting content: -15 ~ +15
] of VISUAL EQ.
Select a desired setting item by touching [ ] or [ ].
Setting items:
VISUAL EQ*
SHARP*
Setting item: BRIGHT
Setting content: -15 ~ +15
Adjusting Color of Picture
VISUAL EQ screen appears.
4
Adjusting Brightness
] of i-Personalize.
The i-Personalize setup screen appears.
3
• To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
• If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
• When any NIGHT M. to CONTRAST setting item is selected, the
brightness is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 37).
Press SETUP.
The SETUP selection screen is displayed.
2
OFF (FLAT): Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 39).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 39).
You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.
• Color adjustment can be made only in the navigation, DVD, Video
CD, AUX modes.
• Color adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Change the setting on the selected item by touching
its [ ] or [ ].
Touch [RTN] to return to the previous screen.
38-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 39 Tuesday, February 14, 2006 4:10 PM
Adjusting Tint of Picture
Data Download
Setting item: TINT
Setting content: G15 ~ R15
Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.
Downloading the BACKGROUND data
• Tint adjustment can be made only in the navigation, DVD, Video CD,
AUX modes.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
• When the picture from the external input is set to PAL, you cannot
adjust the TINT.
You can download data (from Alpine’s website) to a CD-R/CD-RW
(data is written in the root folder), and store the data to the IVA-D100.
To start BACKGROUND download, access the URL below and follow
the on-screen instructions.
Adjusting Image Contrast
http://www.alpine.com or http://www.alpine-europe.com
or http://www.alpine.com.au
1
Setting item: CONTRAST
Setting content: -15 to +15
Adjustment of contrast is done in the range of -15 to +15. “HIGH”
and “LOW” appear as the maximum and minimum values
specified.
• When any NIGHT M. to CONTRAST setting item is selected, image
contrast is automatically adjusted according to the car's interior
brightness if AUTO is set in “Setting the Brightness of the
Backlighting” (page 37).
Adjusting Picture Quality
Setting item: SHARP
Setting content: -15 to +15
Data search of the disc starts. After completing the data
search, the file selection screen of Data Download is
displayed.
2
3
4
5
] of i-Personalize.
Touch [
] of DATA DOWNLOAD.
Touch [ ] or [ ], then select P-1 or P-2.
The selected wallpaper can be changed.
• Picture quality adjustment can be made only in the navigation, DVD,
Video CD, AUX modes.
• Picture quality adjustment cannot be made if a navigation system
with the RGB feature is connected.
8
Setting item: USER PRESET
Setting content: P-1 / P-2
Touch [
The i-Personalize screen appears.
6
7
You can store the settings made for “Adjusting Image Brightness, Tint,
Depth, picture Quality and Contrast.”
Press SETUP.
The SETUP selection screen appears.
Adjustment of picture quality is done in the range of -15 to +15.
“HARD” and “SOFT” appear as the maximum and minimum
values specified.
Storing VISUAL EQ
Insert the CD-R/CD-RW disc containing the data you
need.
Touch [ ] or [ ] to select the desired file name.
Touch [MEMORY].
Data download starts.
When data downloading has completed correctly, the
screen returns to the DATA DOWNLOAD screen.
Touching [RTN] returns to the previous screen.
• For details about procedures of download, see ALPINE’s Web site.
• If data is newly downloaded, the data overwrites the previous data.
• If the battery power cable is removed, the downloaded data is
memorized.
• You can recall a wallpaper in “Switching Background Textures”
(page 37), or “Setting Automatic Background Textures” (page 37).
• When download has completed, remove the disc.
1 After completing “Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast” (pages 38 and 39), touch
[ ] or [ ] of USER PRESET and then select preset No.
“P-1” or “P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [MEMORY].
The adjusted VISUAL EQ mode is stored by the above
operations.
• You can recall the VISUAL EQ mode stored here from P-1 or P-2 of
“Selecting the VISUAL EQ Mode (Maker’s setting)” (page 38).
39-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 40 Tuesday, February 14, 2006 4:10 PM
External Audio Processor
(Optional)
When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated.
In this case, operate them in the connected product. Explanations below
is the case when PXA-H700 or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the MRAD550 is connected. Additionally, if the MRA-F350 is connected, the
following setting “Setting the MX mode” is not available. Also, the
setting content differs between the PXA-H700 and PXA-H701.
• This unit cannot be connected to the PXA-H510 and PXA-H900.
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
Speaker Setup (page 44)
2
Adjusting the speaker levels (page 45)
3
Mixing bass sound to the rear channel
(page 45)
To display the Audio processor mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
(Turning the speakers to be used on and off and
setting their response)
(Adjusting the signal output level to the various
speakers)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Audio processor mode operation
has been released. Engaging the parking brake can reactivate
the Audio processor mode, as long as the car's ignition has not
been turned off. It is not necessary to repeat the above
procedure (1 through 3), of “To display the Audio processor
mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Audio processor mode screen.”
4
Adjusting the acoustic image (page 45)
5
Achieving powerful high volume sound
(page 45)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
7
Adjusting the DVD Level (page 46)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 46)
(Storing all the settings and adjustments made on the
IVA-D100 (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments, etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
40-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 41 Tuesday, February 14, 2006 4:10 PM
Setting the Speakers
1
2
Check that Defeat mode is off (page 25).
Press SETUP.
The SETUP selection screen is displayed.
3
Touch [
] of i-Personalize.
The i-Personalize screen appears.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of SPEAKER SELECT.
The SPEAKER SELECT screen appears.
6
Set the connected speaker by touching the
respective [ ] or [ ] button.
FRONT1:
FRONT2:
REAR:
CENTER:
SUBW.:
7
OFF/FULL (Full Range)/TW (Tweeter)
OFF/ON
OFF/ON
OFF/ON
OFF/MONO/STEREO
Touch [RTN] to return to the previous screen.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 44).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
7
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3) / MX SAT (OFF, SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
8
Touch [RTN] to return to the previous screen.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for AM radio.
• MX CMPM is applied for MP3/WMA, MMD and iPod.
• MX SAT is applied for XM, SIRIUS, HD Radio.
• The MX setting can be performed only when a source is currently
selected.
Set MX Mode of the External Audio
Processor
X-OVER Adjustment
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
2
1
2
Check that Defeat mode is off, and select the source
to be adjusted.
3
Touch [
4
3
Touch [
4
5
] of A.PROCESSOR.
Select ON or OFF of MX by touching [ ] or [ ] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
6
Touch [
] after setting to ON.
The Media Xpander setup screen appears.
] of i-Personalize.
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
Touch [ ] or [ ] of X-OVER to select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
The A.PROC list screen appears.
5
Touch [
The i-Personalize screen will appear.
] of i-Personalize.
The i-Personalize screen will appear.
Press SETUP.
The SETUP selection screen appears.
Press SETUP.
The SETUP selection screen appears.
Check that Defeat mode is off.
6
7
Touch [
] of X-OVER.
Touch [
] of the speaker to be adjusted.
The screen changes to the X-OVER screen to be adjusted.
8
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [ ] or [ ] of FREQ., then select the cut-off
frequency (crossover point).
The adjustable bandwidth differs depending on the speaker
(channel).
41-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 42 Tuesday, February 14, 2006 4:10 PM
Adjusting the Level
Touch [ ] or [ ] of LEVEL, then adjust the HPF or LPF
level.
Adjusting the Slope
Touch [ ] or [ ] of SLOPE, then adjust the HPF or LPF
slope.
9
5.1ms
0.5m
Touch [RTN] to return to the previous screen.
2.25m
• When the speaker is set to the “OFF” mode, the X-OVER for that
speaker cannot be set. Refer to “Setting the Speakers” (page 41).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The H.P.F. filter cannot be set to OFF (slope OFF) if Tweeter is
selected for FRONT1 . Or, only the subwoofer is adjustable if
STEREO is selected for the subwoofer.
Performing Time Correction Manually
(TCR)
The sound is uneven because
the distance between the
listening position and the
different speakers is different.
The difference in the distance
between the front left and rear
right speakers is 1.75 meters
(68-3/4").
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and the
listening position. It is possible to calculate the optimum correction
values and eliminate the time error at the listening position yourself
using this function.
5
1
2
3
Check that Defeat mode is off.
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
Calculate the difference in distance between the
farthest speaker and the other speakers.
L=
4
This value is the time correction value for the various
speakers.
Concrete examples
Calculating the time correction value for the front left speaker on
the diagram below.
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷ 343 x 1000 = 5.1 (ms)
Press SETUP.
The SETUP selection screen appears.
6
Touch [
] of i-Personalize.
The i-Personalize screen appears.
7
Touch [
] of A.PROCESSOR.
The A.PROC list screen is displayed.
8
Touch [ ] or [ ] of T.CORR.
Select L/R or L+R.
(distance of farthest speaker)
– (distance of other speakers)
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
Time correction eliminates
the difference between the
time required for the sound
from the different speakers to
reach the listening position.
Setting the time correction of
the front left speaker to 5.1
ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
9
Touch [
] of T.CORR.
The T.CORR adjustment screen appears.
10 Adjust the time correction value (0.0 ~ 20.0ms) of a
desired speaker by touching the respective [ ] or
[ ] button. (1 step = 0.05ms)
11 Touch [RTN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 41).
• The adjustment value for FRONT2 (Speakers) which is adjusted in
time correction, is also applied to the front speakers in “Setting Bass
Focus” (page 44).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
In other words, setting the time correction value for the front left
speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
42-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 43 Tuesday, February 14, 2006 4:10 PM
Phase Switching
1
2
9
Press SETUP.
• When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 41).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When graphic EQ is adjusted, the adjustment for parametric EQ
becomes ineffective.
Touch [
] of i-Personalize.
The i-Personalize screen appears.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen is displayed.
5
Touch [ ] or [ ] of the desired frequency to adjust the
level.
Make sure that the defeat is turned off (page 25).
The SETUP selection screen is displayed.
3
Adjusting the Level
Touch [
] of PHASE.
Touch [RTN] to return to the previous screen.
The PHASE adjustment screen appears.
6
7
Switch the phase (0° or 180°) by touching [ ] or [ ]
of the desired speaker.
Touch [RTN] to return to the previous screen.
Graphic Equalizer Adjustments
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and center
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
1
2
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s center frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
1
2
3
Touch [
] of i-Personalize.
4
Touch [
] of A.PROCESSOR.
5
The A.PROC list screen appears.
5
6
Touch [
7
Touch [
] of the desired speaker (channel).
The G-EQ adjustment screen appears.
8
Adjust the G-EQ to your preference.
Select L/R or L+R by touching [ ] or [ ] of P-EQ.
When graphic EQ is adjusted, this setting will be turned off.
6
Touch [
] of P-EQ.
The P-EQ list screen appears.
7
Touch [
] of the desired speaker (channel).
The P-EQ adjustment screen appears.
] of G-EQ.
The G-EQ list screen appears.
] of A.PROCESSOR.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
L/R:
When parametric EQ is adjusted, this setting will be turned
off.
Touch [
L/R:
Select L/R or L+R by touching [ ] or [ ] of G-EQ.
Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
] of i-Personalize.
The A.PROC list screen appears.
The i-Personalize screen will appear.
4
Touch [
The i-Personalize screen will appear.
The SETUP selection screen appears.
3
Press SETUP.
The SETUP selection screen appears.
Check that the Defeat mode is off.
Press SETUP.
Check that Defeat mode is off.
8
Adjust the P-EQ to your preference.
Selecting the Band
Touch [ ] or [ ] of BAND.
Select the desired band.
Adjusting the Frequency
Touch [ ] or [ ] of FREQ., then adjust the frequency of
the selected band.
Adjusting the Level
Touch [ ] or [ ] of LEVEL, then adjust the level of the
selected band.
43-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 44 Tuesday, February 14, 2006 4:10 PM
Setting the Bandwidth
Touch [ ] or [ ] of Q.
Select the bandwidth.
9
Touch [RTN] to return to the previous screen.
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 41).
• It is not possible to adjust the frequencies of adjacent bands within 7
steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When the parametric EQ is adjusted, the adjustment for graphic EQ
becomes ineffective.
Setting Bass Sound Control
1
2
Make sure that the defeat is turned off (page 25).
Press SETUP.
The SETUP selection screen is displayed.
3
Touch [
] of i-Personalize.
The i-Personalize screen appears.
4
Touch [
] of A.PROCESSOR.
The A.PROC list is displayed.
5
Touch [
] of BASS SOUND CONT.
The Bass Sound Cont. screen appears.
Setting Bass Compressor
You can adjust the sound of low frequencies as desired.
6
Touch [ ] or [ ] of BASS COMP. to select the
desired mode.
Bass sound is emphasized more as the mode is
sequentially switched as MODE1
2
3, offering you
vivid low frequencies.
Select OFF when the setting is not necessary.
Touch [RTN] to return to the previous screen.
Setting Bass Focus
Using the previously specified delay number (time difference) allows
you to set a time difference between the front-rear/left-right speakers.
Namely, it enables a time correction based on your preference. With an
initial delay of 0.05 ms for each of the 0 to 400 steps, audible time
correction can be achieved.
6
Speaker Setup
The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if Decode mode is switched.
1
2
Check that Defeat mode is off.
Press SETUP.
The SETUP selection screen appears.
3
Touch [
] of i-Personalize.
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of SPEAKER SETUP.
The adjusting screen of SPEAKER SETUP appears.
6
Select the speaker characteristic by touching [ ] or
[ ] of the desired speaker setting.
OFF*1:
SMALL:
When no speaker is connected.
When a speaker that cannot play low frequencies
(80 Hz or less) is connected.
LARGE*2: When a speaker that can play low frequencies (80
Hz or less) is connected.
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “SMALL”, the rear and
center speakers cannot be set to “LARGE.”
• The Subwoofer can be set only to ON/OFF.
• If the center speaker is turned “OFF,” the center channel’s audio
signals are added to the audio signals output from the front speakers.
• If you set the speaker response to “OFF,” also set the speaker setting
to “OFF.” (page 41)
• Perform the setup for all the speakers (“Front,” “Center,” “Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When center is set to “OFF”, the setting is ineffective even if center
is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO LOGIC II, if the rear speaker is set to
“LARGE”, then there will be no output from the subwoofer.
Set the delay number in the front and rear, and on
the right and left of the desired speaker by touching
the respective [ ] or [ ] button.
• Any setting in Bass Focus is applied in time correction, too.
• Touch [RTN] to return to the previous screen.
44-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 45 Tuesday, February 14, 2006 4:10 PM
Setting of Dolby Digital
1
2
Check that Defeat mode is off.
Press SETUP.
The SETUP selection screen appears.
3
4
Touch [
] of i-Personalize.
Achieving powerful high volume sound
(LISTENING)
With Dolby Digital, the dynamic range is compressed so that powerful
sound can be achieved at regular volume levels. This compression can
be canceled to achieve an energetic sound with even greater power, like
the sound in a movie theater.
This function works only in the Dolby Digital mode.
The i-Personalize screen will appear.
Touch [
Touch [
STD: For powerful sound at regular volume levels
MAX.: For powerful sound at high volumes
] of A.PROCESSOR.
] or [
] of LISTENING MODE to select STD or MAX.
The A.PROC list screen appears.
5
Touch [
] of MULTI CH SETUP.
The MULTI CH SETUP display appears.
Set the items below as you desire.
Adjusting the acoustic image
(BI-PHANTOM)
In most installations, the center speaker must be placed directly between
the front passenger and driver. Using this function, the center channel
information is distributed to the left and right speakers. This creates an
acoustic image simulating a center speaker directly in front of each
listener. Adjusting the center width in PL II MUSIC (see “Using the Pro
Logic II Mode,” page 46), makes this function ineffective.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Touch [ ] or [ ] of BI-PHANTOM to adjust the level.
The level can be adjusted within the range of -5 to +5. The
higher the level, the more the position of the center speaker is
shifted to the sides.
The BI-PHANTOM function is turned off by touching [OFF].
• This adjustment is effective when the setting of the center speaker to
SMALL or LARGE in the speaker setup settings.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 41).
Mixing bass sound to the rear channel
(REAR MIX)
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
Adjusting the speaker levels (OUTPUT
LEVEL)
The test tones help to make the volume adjustments of the different
speakers. When levels are equal, a strong sense of presence can be heard
from the different speakers at the listening position.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the decode mode is switched.
1 Touch [AUTO] of OUTPUT LEVEL.
Test tone output is repeated for each of the different
speaker channels. They will be repeated in the order
shown below.
If no operation is performed for 2 seconds, the channel
switches to the next channel.
Left
Center
Left surround
Right
Left
Right Surround
2 While the test tone is being produced from the speakers,
touch [ ] or [ ] of OUTPUT LEVEL balance the output
from all the speakers.
• The adjustment range for the different speakers is
–10 dB - +10 dB.
• Adjust based on the front speakers.
• If a speaker is set to off mode, that speaker’s level adjustment cannot
be made.
Refer to “Speaker Setup” (page 44).
This function mixes the front channel audio signals to the audio signals
output from the rear speakers, improving the sound in the vehicle’s rear
seat.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
Touch [ ] or [ ] of REAR MIX to adjust the level.
The level can adjusted in five steps: -6, -3, 0, +3 and +6. The
higher the level, the more bass is output from the rear speakers.
(The effect differs according to the software (DVD, etc.).)
The REAR MIX function is turned off by touching [OFF].
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF.”
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
45-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 46 Tuesday, February 14, 2006 4:10 PM
Adjusting the DVD Level
Recalling the Preset Memory
The volume (signal level) for Dolby Digital, Dolby PL II, DTS and
PCM modes can be set.
1
2
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
1
2
Check that Defeat mode is off.
Press SETUP.
The SETUP selection screen appears.
3
Touch [
4
5
Touch [
] of A.PROCESSOR.
3
Touch [
] of i-Personalize.
The i-Personalize screen will appear.
4
Touch [ ] or [ ] of A.PROCESSOR to select the
preset memory you want to recall from P-1 through
P-6.
• It takes a few moment to recall the preset memory.
The A.PROC list screen appears.
Using the Pro Logic II Mode
Touch [
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “REAR
FILL” function for outputting the signals of the front channel to the rear
channel.
] of DVD LEVEL.
The DVD LEVEL list screen appears.
6
Press SETUP.
The SETUP selection screen appears.
] of i-Personalize.
The i-Personalize screen will appear.
Check that Defeat mode is off.
Adjust the level by touching [ ] or [ ] of the
desired adjusting mode.
The level can be adjusted in the range of –5 to +5.
Storing Settings in the Memory
1
2
Check that Defeat mode is off.
Press SETUP.
The SETUP selection screen appears.
Adjustment or setting contents can be stored.
Contents that can be stored vary depends on the audio processor used.
1
2
Check that Defeat mode is off (page 25).
Touch [
6
] of i-Personalize.
Touch [
] of A.PROCESSOR.
Touch [ ] or [ ] of USER PRESET to select any one
of the preset buttons (P-1 through P-6).
Touch [MEMORY].
The setting contents are stored.
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [
] of DOLBY PLII/REAR FILL.
The DOLBY PLII/REAR adjusting screen appears.
] of i-Personalize.
The A.PROC list screen appears.
5
4
Press SETUP.
The i-Personalize screen will appear.
4
Touch [
The i-Personalize screen will appear.
The SETUP selection screen appears.
3
3
6
Touch [ ] or [ ] of DOLBY PLII/REAR to select the
desired mode.
PL II MOVIE: Suits the stereo TV shows and all programs
encoded in Dolby Surround. It improves the
sound field directivity to near that of discrete
5.1-channel sound.
PL II MUSIC: Can be used for all stereo music recordings, and
provides a wide, deep sound field.
OFF:
Turns DOLBY PL II function to OFF.
• The stored contents will not be deleted even when the battery power
cord is detached.
46-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 47 Tuesday, February 14, 2006 4:10 PM
If PL II MUSIC is selected, the center width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
center channel position between the center speaker and the L/R
speaker. (The adjustments established in “Adjusting the
acoustic image (BI-PHANTOM)” (page 45) are ineffective while
this function is activated.)
Touch [ ] or [ ] of CENTER WIDTH CONT to adjust the
level.
The level can be adjusted between 0 to 7. When the level
increases, the center channel position moves from the
center speaker position to both sides.
Touch [OFF] of CENTER WIDTH CONT to turn off the
center width control.
• This adjustment is effective when the setting of the center speaker is
SMALL or LARGE in the speaker setup settings.
• “REAR FILL” function
Depending on the input signals, the sound may only be output from
the front speakers. In this case, the “REAR FILL” function can be
used to output signals from the rear speakers as well.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is canceled if the Decode mode is switched.
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 41).
• This function only works with two-channel signals. This operation is
ineffective when 5.1-channel DTS or Dolby Digital signals are input.
• If the setting of REAR FILL is made when REAR MIX is ON, sound is
unchanged in the rear fill setting because REAR MIX is given priority
during 2 channel decoder other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the REAR FILL and REAR MIX setting.
• Touching [RTN] will return to the previous screen.
Navigation System
(Optional)
Switching the Navigation Screen
(Optional)
If an optional Alpine Navigation System is connected to the IVA-D100,
the Navigation screen can be displayed on this unit.
1
Press SOURCE/POWER.
The source screen appears on the display.
2
Touch [ ] of NAV.
The Navigation screen is displayed.
The operation is possible with the supplied navigation
remote control.
For navigation operation, refer to the Owner’s Manual of the
navigator.
• While the Navigation selection mode is being selected in “Setting the
VISUAL Button” (page 36), the navigation mode will be directly
activated.
• If the Navigation mode menu is not displayed on the main menu
screen, set NAV. IN to on by following “Setting the Navigation
Mode” (page 35).
• When the Navigation System is on, the audio and visual navigation
cuts in.
• For operation, if a navigation system with touch panel operation is
connected, refer to the Owner's Manual of the navigation system.
Linear PCM Setting
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
1
2
Check that Defeat mode is off.
Press SETUP.
The SETUP selection screen appears.
3
Touch [
] of i-Personalize.
The i-Personalize screen will appear.
4
Touch [
] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [ ] or [ ] of PCM MODE to select 2 CH or 3
CH.
2CH: 2ch output (L/R)
3CH: 3ch output (L/R/CENTER)
• This adjustment is ineffective when the speaker is set to CENTER
OFF in “Setting the Speakers” (page 41).
47-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 48 Tuesday, February 14, 2006 4:10 PM
Auxiliary Device
(Optional)
• When the KCA-410C is connected, the AUX input of the KCA-410C
can be used only in INTERRUPT MODE. For details, refer to the
KCA-410C Owner’s Manual.
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX terminals on the rear
panel of IVA-D100, follow the procedure described below.
WARNING
It is dangerous (and illegal in many states) for the driver to
watch the TV/Video while driving the vehicle. The driver may
be distracted from looking ahead and an accident could
occur.
Install the IVA-D100 correctly so that the driver cannot watch
TV/Video unless the vehicle is stopped and the emergency
brake is applied.
If the IVA-D100 is not installed correctly, the driver will be
able to watch the TV/Video while driving the vehicle and may
be distracted from looking ahead and cause an accident.
The driver or other people could be severely injured.
To activate your auxiliary devices:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the AUX mode operation has been
released. Engaging the parking brake can reactivate the AUX
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To activate your auxiliary devices.”
Each time the ignition is turned OFF, perform the procedure of “To
activate your auxiliary devices.”
• If you try to activate the auxiliary device while driving, the
display will show the warning-PICTURE OFF FOR YOUR
SAFETY.
1
Press SOURCE/POWER.
The source screen appears on the display.
2
Touch [ ] of AUX*.
The external input screen is displayed.
* The name which is given as the source name in “Setting the AUX
Mode” on page 35 is displayed.
• If the AUX mode is not displayed on the main menu, set AUX IN to
ON by following “Setting the AUX Mode” (page 35).
• The display mode changes by touching [WIDE].
For operation, refer to “Switching Display Modes” on page 26.
48-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 49 Tuesday, February 14, 2006 4:10 PM
Changer
(Optional)
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to the
IVA-D100 if it is Ai-NET compatible. With a CD Changer connected to
the Ai-NET input of the IVA-D100, the CD Changer will be
controllable from the IVA-D100.
If you connect a changer compatible with MP3, you can play CDROMs, CD-Rs, and CD-RWs containing MP3 files on the IVA-D100.
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
1
2
In changer mode, touch [CHG SEL] or press BAND
on the unit to select the next changer (connected CD
changers only) .
To operate the selected changer, see “CD/MP3/
WMA” section.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the IVA-D100.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 49).
1
2
Press SOURCE/POWER.
Touch [ ] of CD CHANGER.
The display changes to the CD changer mode screen.
When a 6 Disc CD Changer is connected;
1 Touch [PAGE1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [D-1] through [D-6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [PAGE1/3] twice to change the Function Guide
display.
2 Touch any one of the select buttons [D-1] through [D-6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [PAGE1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that D-7 through
D-12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the IVA-D100 as
well as the CD changer.
49-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 50 Tuesday, February 14, 2006 4:10 PM
HDD Player
Operation
(Optional)
SAT Radio Receiver
(Optional)
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is connected
via the Ai-NET bus, the following operations may be
performed. However, the XM Receiver and SIRIUS Receiver
cannot be connected at the same time.
Listening to Music of HDD
This device is controllable from the unit when Alpine HDD player is
connected.
1
Press SOURCE/POWER.
The source selection screen appears.
2
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
to 100 digital channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-coast via satellite.
For more information, visit XM’s website at www.xmradio.com., and
SIRIUS’ website at www.sirius.com.
Touch [ ] of MMDRIVER.
The MMDRIVER mode main screen appears.
3
Select the desired music by touching [
[
].
Searching: Touch [
] or [
].
Fast-forward/reverse: Touch and hold [
4
] or
] or [
Touch [ / ] to temporarily stop the music
currently playing.
Touch [
/
] again to resume the play.
Receiving Channels with the SAT
Receiver (Optional)
].
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
Satellite Radio Tuner and an appropriate Ai-Net Interface Adapter will
be required. For details, consult you nearest ALPINE dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the IVA-D100 are operative only when
a SAT Receiver is connected.
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Touch [ ] of XM or SIRIUS.
The XM or SIRIUS main screen display appears.
3
Press BAND to select the desired band.
XM radio:
XM-1
XM-2
SIRIUS radio:
SIRIUS-1
4
XM-3
SIRIUS-2
XM-1
SIRIUS-3
SIRIUS-1
Touch [TUNE] to select the channel number tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
channel name tuning
5
Touch [ NO.] / [NO. ] or [ NAME] or
[NAME ] to select the desired channel. Holding
either button down will change channels
continuously.
• To customers when connecting the SIRIUS Tuner Box:
For detailed functions, refer to the SIRIUS Tuner Box installation
manual.
50-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 51 Tuesday, February 14, 2006 4:10 PM
Tuning in to Categorized Programs
Storing Channel Presets
You can listen to programs categorized to the same group one after
another.
1
In the XM or SIRIUS mode, touch [
select a desired category.
CAT] or [CAT
Touch [PAGE1/3] after selecting a desired band.
The Function Guide is switched.
] to
2
The first channel of the selected category is tuned.
• If the desired category program is not found, the “--------” is
displayed for 2 seconds, then the receiving program is restored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 channels can be stored in the preset memory
(6 channels for each band; XM1, XM2 and XM3 or SIRIUS1,
SIRIUS2 and SIRIUS3 ).
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or SIRIUS channel. The
unit can display this text information as explained below.
Touch and hold any one of the preset buttons [P-1]
through [P-6] for at least 2 seconds. The selected
channel is stored.
• If you store a channel in a preset already being used, the current
channel will be replaced with the new one.
Touch [INFO.] on the XM or SIRIUS mode main screen.
Each time you touch this button, the display changes as shown
below.
Receiving Stored Channels
1
Touch [PAGE1/3] after selecting a desired band.
The Function Guide is switched.
2
*1 Channel name, category, title name, etc., are displayed in one screen.
*2 XM mode only: The information display appears when ON is set in
“Setting the Auxiliary Data Field Display” (page 34).
*3 SIRIUS mode only: displayed when there is a composer name (text
information).
• Auxiliary Data Field is not displayed in the dual screen.
Checking the SAT Radio ID Number
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
Touch any one of the preset buttons [P-1] through
[P-6] that has your desired satellite channel in
memory.
Displaying the Category/Channel Name
Title List
1
In XM or SIRIUS mode, touch [
].
The category title list is displayed.
Screen example for category search list
XM Radio:
This number is an 8 character alphanumeric number. It is printed on a
label found on the SAT Receiver.
SIRIUS Radio:
This number is a 12-digit numeric number. It is printed on a label found
on the SAT Receiver.
It can also be displayed on the screen of the IVA-D100 in the following
way.
1
While receiving SAT Radio, touch [ NO.] or
[NO. ] to select channel ‘0’ for XM and channel
“255” for SIRIUS.
The unit display the ID number.
2
3
The unit displays the ID number.
To cancel the ID number display, change the
channel.
• You cannot use “O,” “S,” “ I,” or “F” for the ID Number. (XM radio
Receiver only)
• You can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
Touch [ ] to receive the selected category channel
directly.
Scrolls the page list up or down.
(Displayed when the list items cannot be displayed entirely.)
Scrolls the list item by item.
Touching and holding will scroll continuously.
GlideTouch bar display.
For operation, refer to “About the GlideTouch bar”
(page 12).
[
] is displayed if there is a hierarchical list.
Touch [
] to change the channel name search screen of
the selected category.
51-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 52 Tuesday, February 14, 2006 4:10 PM
Screen example for channel name search list
iPod® (Optional)
An iPod® can be connected to the IVA-D100 by using the proprietary
ALPINE FULL SPEEDTM connection cable (KCE-422i). When the
IVA-D100 is connected by using the cable, the controls on the iPod are
not functional.
About iPods usable with this unit
The unit can be used with generation three and above iPod, iPod photo,
iPod minis or iPod nanos only. However, future generation iPod
compatibility cannot be guranteed.
The selected channel is received.
Returns to the category search list.
2
Touch [ ] of the selected Category or Channel
name.
• Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
• The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Fourth generation iPod: Ver 3.0.2
iPod photo: Ver.1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
The channel in the selected category is tuned.
• When the channel number is selected, the channel is displayed in
order of channel number. When the channel name is selected, the
channel is displayed in alphabetical order.
Selecting the Channel directly
• The unit cannot be used with the software versions earlier than
“2005-02-22.” For details about “iPod Software Update,” refer to
the iPod Instruction Manual.
You can directly select the channel number on the display of the
numeric keypad.
Playback
1
Touch [PAGE1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Press SOURCE/POWER.
The source selection screen is displayed.
Touch [10KEY].
The numeric keypad input screen is displayed.
3
4
1
2
Touch [ ] of iPod.
The display shows the iPod mode screen.
Touch to input the channel number.
Touch [ENT].
The selected channel is received.
3
Touch [
] or [
] to select the desired song.
Return to the beginning of the current song:
Touch [
].
Fast reverse:
Touch and hold [
Receiving Weather or Traffic information
from SAT Radio
Advance to the beginning of the next song:
Touch [
].
1
Fast forward:
Touch and hold [
Touch [PAGE1/3] twice in the XM or SIRIUS mode.
The function guide appears.
2
Touch and hold [BAND] for at least 2 seconds.
The received weather or traffic channel is stored.
3
Press and hold BAND/SAT for at least 2 seconds on
the unit.
The stored Weather or Traffic channel is recalled.
4
Press and hold BAND/SAT for at least 2 seconds on
the unit.
Returns to the normal mode.
• Stored channels can also be recalled by pressing and holding BAND/
SAT for at least 2 seconds on the unit, even in modes other than XM
or SIRIUS mode.
• Channels other than Weather or Traffic information can also be
stored and recalled.
4
].
].
To pause playback, touch [
Touching [
/
/
].
] again will resume playback.
• If a song is playing on the iPod when it is connected to the IVA-D100,
it will continue playing after the connection.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
IVA-D100. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128 (128
byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the IVA-D100.
52-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 53 Tuesday, February 14, 2006 4:10 PM
Searching for a desired Song
To search for a song in the album of an artist
1 Touch [
] of the desired album in “To search for the
album of an artist” in step 2.
The SONG search screen of the selected album is
displayed.
2 Touch [ ] next to the desired song’s name.
The selected song is played back.
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the IVA-D100 can use these to ease song
searches.
Searching by Playlist
1
Touch [
].
The search mode is activated, and the search list screen
appears.
2
Touch [
] of PLAYLIST SEARCH.
The PLAYLIST search screen is displayed.
3
Select the desired playlist.
To play back the playlist directly
1 Touch [ ] next to the playlist.
The selected playlist is played back repeatedly.
To search for a song in the playlist
1 Touch [
] of the selected playlist.
The SONG search screen of the selected playlist is
displayed.
2 Touch [ ] next to the desired song.
The selected song is played back.
• In search mode, you can jump to an assigned position by touching the
direct search bar for quick search. For details, refer to “Direct
Search Function” (page 54).
Searching by album name
1
Touch [
].
The search mode is activated, and the search list screen
appears.
2
Touch [
] of ALBUM SEARCH.
The ALBUM search screen is displayed.
3
Select the desired album name.
To play back the album directly
1 Touch [ ] next to the album’s name.
All songs of the selected album are played back.
• Touching [
• Touching [
] of ALL will play from first song of all albums.
] of ALL will change the SONG search screen.
To search for a song in an album
Searching by artist name
1
Touch [
1 Touch [
] of the selected album name.
The SONG search screen of the selected album is
displayed.
2 Touch [ ] next to the desired song’s name.
The selected song is played back.
].
The search mode is activated, and the search list screen
appears.
2
Touch [
] of ARTIST SEARCH.
The ARTIST search screen is displayed.
3
• In search mode, you can jump to an assigned position by touching the
direct search bar for quick search. For details, refer to “Direct
Search Function” (page 54).
Select the desired artist.
Searching by song name
To play back the artist directly
1 Touch [ ] next to the artist’s name.
All songs of the selected artist are played back.
• Touching [
albums.
• Touching [
] of ALL will play back from the first song all the artist’s
] of ALL will change the ALBUM search screen.
To search for the album of an artist
1 Touch [
] of the selected artist.
The ALBUM search screen of the selected artist is
displayed.
2 Touch [ ] next to the desired album’s name.
All songs of the selected album are played back.
1
Touch [
].
The search mode is activated, and the search list screen
appears.
2
Touch [
] of SONG SEARCH.
The SONG search screen is displayed.
3
Touch [
] next to the desired song’s name.
The selected song is played back.
• In search mode, you can jump to an assigned position by touching the
direct search bar for quick search. For details, refer to “Direct
Search Function” (page 54).
• Touching [ ] of ALL will play back from the first song the selected
artist's all album.
• Touching [
] of ALL will change the SONG search screen of the
selected artist.
53-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 54 Tuesday, February 14, 2006 4:10 PM
Shuffle Albums:
Direct Search Function
The unit's direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG
mode, you can quickly target any song.
Select an album randomly in the iPod, and plays back the songs
of the album in sequential order. If a song has been selected in
the playlist/artist search mode before selecting Shuffle Album,
only the albums within the playlist/artist are selected randomly.
The songs of the album are played back sequentially.
Shuffle Songs:
Example of ALBUM search screen
When songs are selected in the Playlist, Artist, or Album, all
songs of the Playlist, Artist, or Album are performed in random
order.
1
Touch [ALL
].
The songs will be played back in random sequence.
M.I.X. SONGS
(Shuffle ALL)
Touch [
(off)
] after touching [PAGE1/2].
M.I.X. ALBUMS
(Shuffle Albums)
Scroll the search Page up or down.
Scroll the search list up or down.
Touching and holding will change the list continuously.
Direct search bar
Return to the previous screen.
• Operations you have performed in
Direct Search bar.
1
and
are shown on the
In search mode, touch anywhere on the Direct
search bar to step through items, or slide left or right
to continuously scroll through items. The search list
display also changes according to the selected song
position.
<SONG search example>
If there are 100 songs in your iPod, all the songs are shown on
the direct search bar.
Suppose the song you are searching for is located at around the
50th song of your library: touch around the middle (50%) of the
direct search bar to jump to the song you desire.
Selecting Playlist/Artist/Album
Playlist/Artist/Album can be easily changed.
For example, if you listen to a song from a selected album, the
album can be changed.
1
Touch [ ] or [
Artist/Album.
2
M.I.X. SONGS
(Shuffle Songs)
To cancel M.I.X. play, touch [ALL
(off)
] or [
].
• For details of the search mode, refer to “Searching for a desired
Song” (page 53).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Touch [PAGE1/2].
The function guide is displayed.
2
Touch [
].
The file will be played repeatedly.
RPT
(Repeat One)
3
(off)
(Repeat the list being played back)
To cancel repeat play, touch [
].
• During repeat playback, no other songs are selectable by touching
[
] or [
].
] to select the desired Playlist/
• If search selection mode is not activated, a SONG search is not
possible.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle (M.I.X.) playback, this operation is not possible.
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as M.I.X. on the IVAD100.
Shuffle ALL:
All songs in the iPod are played back in random sequence. If a
song has been selected in the playlist/artist search mode before
selecting Shuffle song, only the songs of the playlist/artist/album
are played back randomly.
54-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 55 Tuesday, February 14, 2006 4:10 PM
Remote Control
Controls on Remote Control
button
Radio mode: SEEK (DN) button
SAT mode:
Channel (DN) button
CD /Changer mode:
Press the button to go back to the beginning
of the current track. Press and hold to fast
reverse.
MP3/WMA mode:
Press the button to go back to the beginning
of the current file. Press and hold to fast
reverse.
DVD Video/DVD-VR/DVD Audio (VCAP)/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for
more than 1 second to reverse the disc
at double speed. Hold for more than 5
seconds to reverse the disc at 8 times
the normal speed. Hold for more than 10
seconds to reverse the disc at 21 times
the normal speed.
DVD mode:
• When pressed and held in while in the
pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more
seconds, the reverse slow motion speed
switches to 1/2 the normal speed.
• The picture is reversed by one frame
each time the button is pressed in the
pause mode.
/
Button
Radio mode: Chooses the tuning mode.
By pressing it more than 2 seconds,
Automatic Memory will be operated.
SAT mode: Switches between CH No. and CH name
Disc mode: Switches between play and pause.
PWR button
Turns the power ON and OFF.
SRC Button
Selects the audio source.
DN Button
Radio mode: Selects, in descending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (DN) Button selects the folder.
Changer mode:
DISC Select (DN) Button selects a disc in
descending order.
• SEARCH Button: Not used.
button
Performs stop.
DVD/Video CD:
Pressing once stops the PRE stop; Pressing
twice sets stop.
MENU Button
DVD Video mode:
Shows the menu display.
CLR Button
Increase or decreases the volume level.
Removes numbers (one character at a time) that have been
selected and input.
Press and hold for 2 seconds. All the characters which were
selected and input are erased.
RETURN Button
DISP/TOP M. Button
VOLUME
/
Button
DVD/Video CD (PBC ON) mode: Returns to the previous
display. (Does not return in some discs.)
DVD Video/DVD-VR/Video CD mode:
Shows playback status (only when car is
stopped).
DVD Video/DVD Audio (VCAP) mode:
By pressing more than 2 seconds, shows the
top menu display.
55-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 56 Tuesday, February 14, 2006 4:10 PM
SETUP Button
Not used.
AUDIO Button
DVD/Video CD mode: Switches audio.
BAND Button
Radio mode: Changes the band.
Changer mode:
Switches the disc mode.
(when an optional KCA-410C is connected)
DVD mode:
While playing a DVD, the display mode is
switched (only when car is stopped).
A.PROC Button
When an external audio processor is connected:
Press the button to display the audio
processor setting screen.
When an external audio processor is non-connected:
Press the button to display the audio mode
screen.
MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
By pressing the button for more than 2 seconds, the monitor
opens or closes.
UP Button
Radio mode: Selects, in ascending order, stations
programmed into the radio’s presets.
MP3/WMA mode:
Folder Select (UP) Button to selects the
folder.
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
,
,
,
DVD Video/DVD Audio (VCAP) mode:
Selects an item displayed in the screen.
ENT. Button
Enters the selected item.
button
Radio mode: SEEK (UP) button
SAT mode:
Channel (UP) button
CD/Changer mode:
Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.
MP3/WMA mode:
Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.
DVD Video/DVD-VR/DVD Audio (VCAP)/Video CD:
• Move to the desired position on the disc.
• During playback, press and hold for more
than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed. Hold for more than 10
seconds to forward the disc at 21 times
the normal speed.
DVD Video/DVD-VR/Video CD:
• When pressed and held in while in the
pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.
• The picture is forwarded by one frame
each time the button is pressed in the
pause mode.
Numeric Keypad
Inputs numbers.
MONITOR Button
Not used.
ANGLE Button
DVD Video/Audio (VCAP) mode:
Switches the angle of the picture.
SUBTITLE button
DVD mode:
Switches the subtitle.
• The SETUP operation of the unit cannot be carried out from the
remote control.
• Some operations may not be possible depending on the disc.
When Using the Remote Control
• Point the remote control at the remote sensor within
about 2 meters.
• It may not be possible to operate the remote control if
the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
56-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 57 Tuesday, February 14, 2006 4:10 PM
Battery Replacement
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Battery type: CR2025 battery or equivalent.
1
Opening the battery case
Slide out the battery cover while firmly pressing in the
direction of the arrow.
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
2
Replacing the battery
Put the battery in the case with the (+) indication upward as
shown in the illustration.
• Placing a battery in backwards way may cause a malfunction.
57-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 58 Tuesday, February 14, 2006 4:10 PM
Terminology
Information
Dolby Digital
About DVDs
Music CDs and DVDs have grooves (tracks) in which the digital
data is recorded. The data is represented as microscopic pits
recorded into the track – these pits are read by a laser beam to
play the disc. On DVDs, the density of the tracks and pits is
twice that of CDs, so DVDs can contain more data in less space.
CDs
Dolby Digital is a digital audio compression technology
developed by Dolby Laboratories that allows large quantities of
audio data to be efficiently recorded on discs. It is compatible
with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for the different channels
are completely independent, and since the sound is high quality
digital there is no loss of sound quality.
* The separately sold digital audio processor (PXA-H700, etc.) is
required to enjoy full 5.1-channel surround sound.
The IVA-D100 performs Dolby Digital decoding when it outputs
analog audio signals, it just happens to be 2-channel audio not
5.1-channel.
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
Center
speaker
Minimum pit
0.6 mm
length 0.6 mm
0.9 µm
Track pitch 0.74 µm
Front
speakers
A 12 cm disc can contain one movie or about four hours of
music.
In addition, DVDs provide sharp picture quality with vivid colors thanks
to a horizontal resolution of over 500 lines (compared to less than 300
for VHS tape). With the addition of an optional, digital audio processor
(PXA-H700, etc.), you can recreate the power and presence of a movie
theater with Dolby Digital 5.1-channel Surround.
Rear
speakers
Subwoofer
In addition, DVDs offer a variety of functions.
Multiple audio* (page 23)
Movies can be recorded in up to eight languages. The desired
language can be selected from the unit.
Speaker layout for enjoying
Dolby Digital sound/dts sound
Subtitles function* (page 24)
Movies can include subtitles in up to 32 languages. The desired
subtitle language can be selected from the unit.
Multi angle function* (page 23)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the unit.
Multi story function*
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line selection screens
including instructions appear during the movie. Just follow the
instructions.
DTS
This is a home-use digital sound format of the DTS Sound
System. This is a high quality sound system, developed by
Digital Theater Systems, Inc. for use in movie theaters.
DTS has six independent sound tracks. The theater presentation
is fully realized in the home and other settings. DTS is the
abbreviation for Digital Theater System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H700, etc.). The DVD video software
must also have a DTS sound track.
The IVA-D100 has a built-in DTS 2-channel audio decoder.
Analog audio outputs are available.
* The functions audio languages, subtitle languages, angles, etc., differ
from disc to disc. For details, refer to the disc’s instructions.
58-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 59 Tuesday, February 14, 2006 4:10 PM
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over
the entire frequency range.
This is done with an advance, high sound quality matrix
surround decoder which draws out the spatial properties of the
original recording without adding any sounds to or changing the
sound of the source.
* The separately sold digital audio processor (PXA-H700, etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
LPCM is a signal recording format used for music CDs.
Whereas music CDs are recorded at 44.1 kHz/16 bits, DVDs are
recorded at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving
higher sound quality than music CDs.
Rating levels (parental lock)
This is a function of the DVD for restricting the viewing age as
stipulated by laws in different countries. The way in which
viewing is restricted differs from DVD to DVD. Sometimes the
DVD cannot be played at all, other times certain scenes are
skipped, and other times certain scenes are replaced with other
scenes.
59-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 60 Tuesday, February 14, 2006 4:10 PM
List of Language Codes
(For details, see page 29.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZH
ZU
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
60-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 61 Tuesday, February 14, 2006 4:10 PM
List of Country Codes
(For details, see page 29.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
Abbreviation
Country
DM
Andorra
DO
United Arab Emirates
DZ
Afghanistan
Antigua and Barbuda
EC
EE
Anguilla
EG
Albania
Armenia
EH
ER
Netherlands Antilles
ES
Angola
Antarctica
ET
FI
Argentina
FJ
American Samoa
Austria
FK
FM
Australia
FO
Aruba
Azerbaijan
FR
GA
Bosnia and Herzegovina
GB
Barbados
Bangladesh
GD
GE
Belgium
GF
Burkina Faso
Bulgaria
GH
GI
Bahrain
GL
Burundi
Benin
GM
GN
Bermuda
GP
Brunei Darussalam
Bolivia
GQ
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Abbreviation
KI
Dominica
KM
Dominican Republic
KN
Algeria
KP
Ecuador
Estonia
KR
Egypt
KW
Western Sahara
KY
Eritrea
KZ
Spain
LA
Ethiopia
Finland
LB
Fiji
LC
Falkland Islands
LI
Micronesia, Federated States of
LK
Faroe Islands
LR
France
LS
Gabon
LT
United Kingdom
LU
Grenada
LV
Georgia
LY
French Guiana
MA
Ghana
MC
Gibraltar
MD
Greenland
MG
Gambia
MH
Guinea
MK
Guadeloupe
Equatorial Guinea
ML
Greece
MM
South Georgia and the
South Sandwich Islands
MN
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
Code
7573
7577
7578
7580
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
61-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 62 Tuesday, February 14, 2006 4:10 PM
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation
Peru
SJ
French Polynesia
SK
Papua New Guinea
SL
Philippines
SM
Pakistan
SN
Poland
SO
Saint Pierre and Miquelon
SR
Pitcairn
ST
Puerto Rico
SV
Portugal
SY
Palau
SZ
Paraguay
TC
Qatar
TD
Reunion
TF
Romania
TG
Russian Federation
TH
Rwanda
TJ
Saudi Arabia
TK
Solomon Islands
TM
Seychelles
TN
Sudan
TO
Sweden
TP
Singapore
TR
Saint Helena
TT
Slovenia
TV
Code
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan Mayen
TW
Slovakia
TZ
Sierra Leone
UA
San Marino
UG
Senegal
UM
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern Territories
VI
Togo
VN
Thailand
VU
Tajikistan
WF
Tokelau
WS
Turkmenistan
YE
Tunisia
YT
Tonga
YU
East Timor
ZA
Turkey
ZM
Trinidad and Tobago
ZW
Tuvalu
Code
8487
8490
8565
8571
8577
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
62-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 63 Tuesday, February 14, 2006 4:10 PM
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items
in the following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected, or then consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
• Blackout mode is activated.
- Cancel Blackout mode.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the DVD, CD player, navigation system are not
securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
Unclear or noisy display.
• Fluorescent plate is worn out.
- Replace the fluorescent plate.
Navigation system inoperative.
• Connections to the navigation system are incorrect.
- Check the connections with the navigation system and connect
the cables correctly and firmly.
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube*.
* The fluorescent tube replacement is not free of charge even within the
warranty period, for the tube is an article of consumption.
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
CD/MP3/WMA/DVD/Video CD
Disc playback sound is wavering.
• Moisture condensation in the disc Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Make sure the disc is being inserted following the instructions
in the CD/MP3/WMA, DVD/Video CD Player Operation
section.
Unable to fast forward or reverse the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc. Consult
your nearest ALPINE dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
63-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 64 Tuesday, February 14, 2006 4:10 PM
Error displays
• Mechanical error
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest ALPINE dealer.
MP3/WMA is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA” (pages 16 and 17), then rewrite
in the format supported by this device.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake lead is not connected.
- Connect the monitor’s parking brake wire and set the parking
brake.
(For details, refer to the monitor’s instructions.)
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labeled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to play back with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be slightly disturbed, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
• Monitor’s fluorescent tube is worn.
- Replace the monitor’s fluorescent tube.
Indication for CD/MP3/WMA
• Protective circuit is activated due to high temperature.
• Operations of an internal disc, DVD setup, etc., cannot be
performed.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
Image stops sometimes.
• Disc is scratched.
- Replaced with a non-scratched disc.
64-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 65 Tuesday, February 14, 2006 4:10 PM
Indication for DVD/Video CD
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Button operation on the unit or remote control is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Protective circuit is activated to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
• The DVD setup operation was attempted when a disc is inserted
in the unit.
- Eject the disc before the DVD setup operation.
Indication for CD changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• Mechanism error.
1) Press
and eject the disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
for a few times, consult your Alpine dealer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Press .
- Change the disc.
65-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 66 Tuesday, February 14, 2006 4:10 PM
Indication for SAT Receiver Mode
Indication for iPod Mode
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
• The iPod is not connected.
- Make sure the iPod is correctly connected (refer to
“connections”).
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the IVA-D100.
(XM mode)
(SIRIUS mode)
• XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
(XM mode)
• Communication error
- Turn the ignition key off, and then set to ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
• Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
(SIRIUS mode)
• The channel currently selected has stopped broadcasting.
- Select another channel.
• The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
66-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 67 Tuesday, February 14, 2006 4:10 PM
GENERAL
Specifications
Power Requirement
MONITOR SECTION
Screen Size
6.5"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 280,800 pcs. (1200 × 234)
Effective Number of Picture Elements
99.99% or more
Illumination System
Cold cathode fluorescent tube
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7 – 107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
14.4 V DC
(11–16 V allowable)
Operating temperature
+32°F to +113°F
(0°C to + 45°C)
Power Output
18 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Output Voltage
Bass
Treble
Weight
2,000 mV / 10k ohms
- 14 dB / +20 dB at 60 Hz
± 14 dB at 10 kHz
(Monitor Section) 2.6 kg
(5 lbs. 12 oz)
(Power Amplifier Section) 0.47 kg
(1 lbs. 1 oz)
Audio output level
Preout (Front, Rear):
Preout (Subwoofer):
Ai-NET:
2V/10k ohms (max.)
2V/10k ohms (max.)
850 mV
CHASSIS SIZE (Monitor section)
AM TUNER SECTION
Tuning Range
Usable Sensitivity
530 – 1,710 kHz
22.5 µV/27.0 dBf
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
Width
Height
Depth
178 mm (7")
50 mm (2")
165 mm (6-1/2")
CHASSIS SIZE (Power Amplifier section)
5 – 20,000 Hz
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC/PAL
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
More than 105 dB
Width
Height
Depth
144 mm (5-5/8")
40 mm (1-9/16")
108.3 mm (4-1/4")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
PICKUP
Wave length
DVD:
CD:
Laser power
665 nm
785 nm
CLASS II
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
CAUTION
CR2025 battery
51 mm (2")
119 mm (4-11/16")
13 mm (1/2")
40 g (1.4 oz) (battery excluded)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of Monitor player)
67-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 68 Tuesday, February 14, 2006 4:10 PM
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 4 to 6 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS
Failure to make the proper connections may result in fire or product
damage.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wires insulation from being cut by
the metal edge of the hole.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your IVA-D100. This will reduce any chance of damage to the
unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the diagram.
Incorrect connections may cause the unit to malfunction or damage to
the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be aware of
the factory installed components (e.g. on-board computer). Do not tap
into these leads to provide power for this unit. When connecting the
IVA-D100 to the fuse box, make sure the fuse for the intended circuit of
the IVA-D100 has the appropriate amperage. Failure to do so may result
in damage to the unit and/or the vehicle. When in doubt, consult your
ALPINE dealer.
• The IVA-D100 uses female RCA-type jacks for connection to other
units (e.g. amplifier) having RCA connectors. You may need an adaptor
to connect other units. If so, please contact your authorized ALPINE
dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–) terminal.
Never connect left and right channel speaker cables to each other or to
the vehicle body.
• The Display must be completely retracted in the casing when installing.
If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/close
without coming in contact with the gear shift.
• Do not connect the power supply cable to the Remote Turn-On lead on
the Power Amplifier when the ignition is turned on or set to Accessory.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
68-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 69 Tuesday, February 14, 2006 4:10 PM
Connect each input lead coming from an amplifier or
equalizer to the corresponding output lead coming from the
left rear of the IVA-D100. Connect all other leads of the IVAD100 according to details described in the Connections
section.
Installation
Installing the Monitor
Installation Location
Before deciding on the mounting location, check that opening and
closing the display will not hamper gear shifting in that position.
• Install at an angle of within 30 degrees from the horizontal.
• The monitor’s angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Angle” on page 28.
Even when the vehicle’s battery power is removed, the adjusted
monitor angle remains stored in memory.
1
3
Lock Pin
Slide the IVA-D100 into the dashboard. When the unit is in
place, make sure the locking pins are fully seated in the
down position. This can be done by pressing firmly in on the
unit while pushing the locking pin down with a small
screwdriver. This ensures that the unit is properly locked
and will not accidentally come out from the dashboard.
Install the supplied Front Frame.
Dashboard
Removal
Mounting Bracket
(Included)
Mounting Sleeve
(Included)
IVA-D100
1. Use a small screwdriver (or similar tool) to push the
locking pins to the “up” position (see Step 3). As each
pin is unlocked, gently pull out on the unit to make sure
it does not re-lock before unlocking the second pin.
2. Pull the unit out, keeping it unlocked as you do so.
< JAPANESE CAR >
To install using the vehicle’s standard bracket.
Flush head Screws
(M4 × 3) (Included)
Flush Head Screws (M4 × 3)
(Included)
Ground Lead
IVA-D100
Slide the mounting sleeve into the dashboard. Install the
supplied bracket on the monitor.
2
• Make sure to use the supplied Flush head screw (M4 × 3) to
install the monitor.
If you use another screw to install the monitor, it may cause a
malfunction.
Mounting Bracket
• Make sure to use the supplied flush head screw (M4 × 3) to install the
monitor.
If you use another screw to install the monitor, it may cause a
malfunction. However, only if you cannot install with the flush head
screws (M4 × 3), use the supplied screw (M4 × 6).
Screw
Hex Nut (M5)
Bolt Stud
IVA-D100
Meatal Mounting
Strap
Ground
Lead
Chassis
Front Frame
(Included)
Wider edge should face down.
Reinforce the monitor unit with a metal mounting strap (not
supplied). Secure the ground lead of the unit to a clean
metal spot using a screw ( ) already attached to the
vehicle’s chassis.
• For the screw marked
, use an appropriate screw for the
chosen mounting location.
69-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 70 Tuesday, February 14, 2006 4:10 PM
Installing the DC/DC Converter
Installing the Power Amplifier
This Power Amplifier is designed for use only with the IVA-D100. If
products other than IVA-D100 are connected to the supplied
Power Amplifier, its specified performance is not guaranteed.
When mounting with Velcro fasteners
When mounting the Power Amplifier with the Velcro fasteners, be sure
to choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear deck with
the Velcro fasteners.
1
Install the DC/DC Converter on the floor with the
supplied flange-head tapping screws (M4 × 14).
Flange-head tapping
screws (M4 × 14)
(Included)
DC/DC Converter
Remove the Protective paper and attach two pieces
of Velcro fastener to the bottom of the Power
Amplifier.
Power
Amplifier
Protective paper
Protective paper
2
Velcro Fasteners
(Included)
Check the position, and then fix the Power Amplifier
to the floor carpet.
When mounting with Screws
When mounting the Power Amplifier with the screws, be sure to choose
a flat location.
When making holes, be careful not to scratch any pipes or wires.
1
Install the Power Amplifier on the floor with the
supplied hexagonal screw (M4 × 15).
hexagonal screw (M4 × 15)
(Included)
Power Amplifier
70-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 71 Tuesday, February 14, 2006 4:10 PM
Foot Brake Lead / Parking Brake Lead Connection
Foot brake lamp
FOOT BRAKE
IVA-D100
Monitor unit
(Yellow/Black)
Pinch
Connector
(sold separately)
Foot brake lead
Chassis
PARKING BRAKE
(Yellow/Blue)
Foot brake switch
Parking brake lamp
Pinch
Connector
(sold separately)
Parking brake lead
Battery
Parking brake switch
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
IGNITION
(Red)
SPST SW (Optional)
FUSE (5A)
(Optional)
BATTERY
(Yellow)
IVA-D100
(Monitor unit
and Power
Amplifier)
FUSE (20A)
(Optional)
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when IVA-D100 is used individually.
• If the switched power (ignition) lead of the IVA-D100 is connected directly to the positive (+) post of the vehicle’s battery, the IVA-D100 draws
some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.
To prevent external noise from entering the audio system.
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
•
•
•
•
71-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 72 Tuesday, February 14, 2006 4:10 PM
Connections
Connection diagrams are shown on page 72 and 73. The explanation for leads, etc., is described on page 74. When connecting leads, read
pages 72 to 74 carefully and connect correctly.
<Monitor unit>
(Yellow)
To video output terminal
(White)
To audio output terminals
(R,L)
(Red)
(Yellow)
To video input terminal
Amplifier
Subwoofers
<Power Amplifier>
REMOTE TURN-ON
To external amplifier
(Blue/White)
To remote turn-on of the
monitor unit*
(Connect to the REMOTE TURNON lead
of page 73.)
BATTERY
(Yellow)
Battery
GND
(Black)
SPEAKER
LEFT
FRONT
(White)
(White/
Black)
SPEAKER
LEFT
REAR
(Green/
Black)
SPEAKER
RIGHT
(Green) REAR
(Violet)
(Violet/
Black)
SPEAKER
RIGHT
FRONT
(Gray/
Black)
(Gray)
Speakers
Front left
Rear left
Rear right
Front right
* Do not connect the power supply cable when the ignition is turned on or set to Accessory.
72-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 73 Tuesday, February 14, 2006 4:10 PM
Antenna
CD changer
(Sold Separately)
To iPod
<Monitor unit>
REMOTE OUT
To remote input lead
(White/Brown)
REVERSE
(Orange/White)
REMOTE TURN-ON
(Blue/White)
To plus side of the back
lamp signal lead of the car
To supplied power amplifier
(Connect to the REMOTE
TURN-ON lead
POWER ANT
of page 72.)
To power antenna
(Blue)
AUDIO INTERRUPT IN
(Pink/Black)
PARKING BRAKE
(Yellow/Blue)
FOOT BRAKE
(Yellow/Black)
To vehicle phone
To the parking brake
signal lead
To the foot brake cord or
brake lamp cord
IGNITION
(Red)
Ignition key
BATTERY
(Yellow)
GND
Battery
(Black)
• Set the system switch to “Ai” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
* The label is attached on the bottom of the unit.
73-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 74 Tuesday, February 14, 2006 4:10 PM
DC/DC Converter
Ai-NET Connector
• Do not install the converter at a location subjected to water
such as under the floor mat or air conditioner. This may cause a
malfunction.
• Do not bundle the DC/DC converter cable with other audio
cables. Also, do not install the cables directly next to the unit.
Doing so may induce noise into your system.
• Keep the DC/DC converter away from the Antenna cables and
the rear side of the unit, otherwise noise may be generated when
receiving radio broadcast.
Connect this to the output or input connector of another
device (CD Changer, Equalizer, HD Radio™ TUNER
MODULE, etc.) equipped with Ai-NET.
• Interface adapter (KCA-420i) is not recommended for use with this
product.
• You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) to this component.
Ai-NET Cable (Included with CD Changer)
Video Input Connector (AUX INPUT) (Yellow)
RGB Input Terminal
Input the video.
Audio Input Connectors (AUX INPUT)
Connect this to the RGB output terminal of the Navigation
System.
RED is right and WHITE is left input the audio.
iPod Direct Connector
Video Output Connector (Yellow)
Control iPod signals.
Connect this to an iPod, using the (sold separately) FULL
SPEED™ Connection Cable (KCE-422i).
Output the video.
Subwoofer RCA Connectors
Connect the input lead of an amplifier for the subwoofer to
this terminal.
FULL SPEED™ Connection Cable (KCE-422i) (sold
separately)
Front Output RCA Connectors
System Switch
RED is right and WHITE is left.
When connecting a processor or divider using Ai-NET,
place this switch in the EQ position. When no device is
connected, leave the switch in the Ai position.
Rear Output RCA Connectors
RED is right and WHITE is left.
RCA Extension Cable (sold separately)
• Be sure to turn the power off to the unit before changing the switch
position.
RCA Extension Cable (Included)
Rear Input Terminals
Power Supply Connector
Front Input Terminals
Remote Control Output Lead (White/Brown)
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Reverse Lead (Orange/White)
Fuse Holder (15A)
Use only when a back-up camera is connected. Connect to
the plus side of the car's reverse lamp that lights when the
transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked with putting the car into reverse (R).
Ground Lead (Black)
Power Antenna Lead (Blue)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Connect this lead to the +B terminal of your power antenna,
if applicable.
Right Front (+) Speaker Output Lead (Gray)
Parking Brake Lead (Yellow/Blue)
Right Front (–) Speaker Output Lead (Gray/Black)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the IVA-D100.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Audio Interrupt In Lead (Pink/Black)
Foot Brake Lead (Yellow/Black)
Left Rear (+) Speaker Output Lead (Green)
Connect to the vehicle's foot brake lead or brake lamp lead.
Left Rear (–) Speaker Output Lead (Green/Black)
Switched Power Lead (Ignition) (Red)
Left Front (–) Speaker Output Lead (White/Black)
Antenna Receptacle
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Digital Output Terminal (Optical)
Fuse Holder (7.5A)
Left Front (+) Speaker Output Lead (White)
Use when combining fiber digital input compatible
products.
74-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 75 Tuesday, February 14, 2006 4:10 PM
System Example
Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and
changer.
Fiber optic
cable
NVE-N852A/NVE-N871A/NVE-N872A
Navigation system
(Sold Separately)
Fiber digital Input terminal
(for head unit)
Audio Processor (Ai-NET)
(Fiber Digital compatible)
(Sold Separately)
<Monitor unit>
Ai-NET
cable
Fiber digital
Input terminal
(for DVD
Player)
(Yellow)
Fiber digital
Input terminal
(for Changer)
Ai-NET
cable
*Fiber
optic cable
Fiber optic cable
(Yellow)
(White/Brown)
REMOTE OUT
(White/Brown)
REMOTE IN
DVD Video Player
(Ai-NET)
(DVA-5210 etc.)
(Sold Separately)
Ai-NET cable
CD Changer
(Ai-NET)
(Sold Separately)
*Only connect fiber digital compatible CD Changer
• When the fiber optic compatible product is connected, it is necessary to set the mode of this unit. Refer to “Setting the Digital Output” (page 36)
and set to ON.
• When the NVA-N751AS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately).
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
75-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 76 Tuesday, February 14, 2006 4:10 PM
RGB Cable (Included with NVE-N852A/NVE-N872A,
not included with NVE-N871A)
Power Supply Connector
RGB Input Terminal
Connect this to the RGB output terminal of the Navigation
System.
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ position. When no
device is connected, leave the switch in the Ai position.
• Be sure to turn the power off to the unit before changing the
switch position.
Digital Output Terminal
Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
AUX Video Input Connector (AUX INPUT)
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
RCA Extension Cable (Included with DVD video
player)
Ai-NET Cable (Included with DVD video player)
Fiber optic Cable (Sold Separately)
Ai-NET Cable (Included with Audio Processor)
Ai-NET Cable (Included with CD Changer)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To Ai-NET Connector (Gray)
To Ai-NET Connector (Black)
76-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 77 Tuesday, February 14, 2006 4:10 PM
When Connecting External Equipment
(Yellow)
Rear monitor
(Sold Separately)
<Monitor unit>
To Video Input terminal
To Video Output terminal
Back-up camera
(Sold Separately)
(Yellow)
(Orange/White)
REVERSE
Use only when back-up camera is
connected.
System Switch
AUX Video Output Connector
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ position. When no
device is connected, leave the switch in the Ai position.
• Be sure to turn the power off to the unit before changing the
switch position.
Use when connecting an optional monitor, etc.
Power Supply Connector
AUX Video Input Connector (AUX INPUT)
RCA Extension Cable (Sold separately)
Reverse Lead (Orange/White)
Connect to the plus side of the car’s reverse lamp which
lights when the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is
linked to putting the car into reverse (R).
Use when connecting a back-up camera.
77-EN
01GB07IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
01GB00IVAD100.book Page 78 Tuesday, February 14, 2006 4:10 PM
02WARRANTY.fm Page 73 Thursday, February 9, 2006 5:35 PM
WARRANTY -H4 :EN (for US model)