Download Electrolux T4300S Service manual

Transcript
42
Service
manual
42. Drum with bearing
Replacing bearing house
1. Loosening the belt tensioner of the drum motor, see section 30: Motors
1. Fig. 1 Dismount the 3 screws B that secures the bearing house cover.
2. Remove cover A.
3. Unscrew and remove bolt and washer from the main drum bearing
3. Remove the 3 nuts at C.
4. Fig. 2 Remove the bearing house with bearing.
6. Lubricate the shaft with an anti-fretting paste (G1 LGAF 3E or similar quality with a
temperature resistance above 160°C).
7. Fig. 3 and 4 Replace bearing house and bearing. Remember when mounting
new bearing house to mount the 3 Rip lock washers under the nuts with the grooves
upwards.
8. Secure the bearing house by tightening the 3 nuts C with 5Nm and mount cover.
1
2
C
A
B
6
487 0329 81